ALSA: pxa: slightly refactor reset handling
PXA25x also shows some problems when using interrupts during reset
handling. Thus do not use interrupts on all pxa kinds (to detect codec
ready state). Instead use a common mdelay-loop on all platforms to
detect codecs becoming ready.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index e6f4633..99a4668 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -117,8 +117,7 @@
{
gsr_bits = 0;
- GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
- wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+ GCR |= GCR_WARM_RST;
}
static inline void pxa_ac97_cold_pxa25x(void)
@@ -129,8 +128,6 @@
gsr_bits = 0;
GCR = GCR_COLD_RST;
- GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
- wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
}
#endif
@@ -149,8 +146,6 @@
static inline void pxa_ac97_cold_pxa27x(void)
{
- unsigned int timeout;
-
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
@@ -161,29 +156,20 @@
udelay(5);
clk_disable(ac97conf_clk);
GCR = GCR_COLD_RST | GCR_WARM_RST;
- timeout = 100; /* wait for the codec-ready bit to be set */
- while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(1);
}
#endif
#ifdef CONFIG_PXA3xx
static inline void pxa_ac97_warm_pxa3xx(void)
{
- int timeout = 100;
-
gsr_bits = 0;
/* Can't use interrupts */
GCR |= GCR_WARM_RST;
- while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(1);
}
static inline void pxa_ac97_cold_pxa3xx(void)
{
- int timeout = 1000;
-
/* Hold CLKBPB for 100us */
GCR = 0;
GCR = GCR_CLKBPB;
@@ -199,14 +185,13 @@
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR = GCR_WARM_RST | GCR_COLD_RST;
- while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(10);
}
#endif
bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
{
unsigned long gsr;
+ unsigned int timeout = 100;
#ifdef CONFIG_PXA25x
if (cpu_is_pxa25x())
@@ -224,6 +209,10 @@
else
#endif
BUG();
+
+ while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+ mdelay(1);
+
gsr = GSR | gsr_bits;
if (!(gsr & (GSR_PCR | GSR_SCR))) {
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
@@ -239,6 +228,7 @@
bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
{
unsigned long gsr;
+ unsigned int timeout = 1000;
#ifdef CONFIG_PXA25x
if (cpu_is_pxa25x())
@@ -257,6 +247,9 @@
#endif
BUG();
+ while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+ mdelay(1);
+
gsr = GSR | gsr_bits;
if (!(gsr & (GSR_PCR | GSR_SCR))) {
printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",