blob: 5c3b319dab37cadaadc64c576bc18482e943d444 [file] [log] [blame]
/* Typhoon Radio Card driver for radio support
* (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
*
* Card manufacturer:
* http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
*
* Notes on the hardware
*
* This card has two output sockets, one for speakers and one for line.
* The speaker output has volume control, but only in four discrete
* steps. The line output has neither volume control nor mute.
*
* The card has auto-stereo according to its manual, although it all
* sounds mono to me (even with the Win/DOS drivers). Maybe it's my
* antenna - I really don't know for sure.
*
* Frequency control is done digitally.
*
* Volume control is done digitally, but there are only four different
* possible values. So you should better always turn the volume up and
* use line control. I got the best results by connecting line output
* to the sound card microphone input. For such a configuration the
* volume control has no effect, since volume control only influences
* the speaker output.
*
* There is no explicit mute/unmute. So I set the radio frequency to a
* value where I do expect just noise and turn the speaker volume down.
* The frequency change is necessary since the card never seems to be
* completely silent.
*
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
#include <linux/proc_fs.h> /* radio card status report */
#include <linux/seq_file.h>
#include <asm/io.h> /* outb, outb_p */
#include <asm/uaccess.h> /* copy to/from user */
#include <linux/videodev2.h> /* kernel radio structs */
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#define RADIO_VERSION KERNEL_VERSION(0,1,1)
#define BANNER "Typhoon Radio Card driver v0.1.1\n"
static struct v4l2_queryctrl radio_qctrl[] = {
{
.id = V4L2_CID_AUDIO_MUTE,
.name = "Mute",
.minimum = 0,
.maximum = 1,
.default_value = 1,
.type = V4L2_CTRL_TYPE_BOOLEAN,
},{
.id = V4L2_CID_AUDIO_VOLUME,
.name = "Volume",
.minimum = 0,
.maximum = 65535,
.step = 1<<14,
.default_value = 0xff,
.type = V4L2_CTRL_TYPE_INTEGER,
}
};
#ifndef CONFIG_RADIO_TYPHOON_PORT
#define CONFIG_RADIO_TYPHOON_PORT -1
#endif
#ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ
#define CONFIG_RADIO_TYPHOON_MUTEFREQ 0
#endif
#ifndef CONFIG_PROC_FS
#undef CONFIG_RADIO_TYPHOON_PROC_FS
#endif
struct typhoon_device {
unsigned long in_use;
int iobase;
int curvol;
int muted;
unsigned long curfreq;
unsigned long mutefreq;
struct mutex lock;
};
static void typhoon_setvol_generic(struct typhoon_device *dev, int vol);
static int typhoon_setfreq_generic(struct typhoon_device *dev,
unsigned long frequency);
static int typhoon_setfreq(struct typhoon_device *dev, unsigned long frequency);
static void typhoon_mute(struct typhoon_device *dev);
static void typhoon_unmute(struct typhoon_device *dev);
static int typhoon_setvol(struct typhoon_device *dev, int vol);
static void typhoon_setvol_generic(struct typhoon_device *dev, int vol)
{
mutex_lock(&dev->lock);
vol >>= 14; /* Map 16 bit to 2 bit */
vol &= 3;
outb_p(vol / 2, dev->iobase); /* Set the volume, high bit. */
outb_p(vol % 2, dev->iobase + 2); /* Set the volume, low bit. */
mutex_unlock(&dev->lock);
}
static int typhoon_setfreq_generic(struct typhoon_device *dev,
unsigned long frequency)
{
unsigned long outval;
unsigned long x;
/*
* The frequency transfer curve is not linear. The best fit I could
* get is
*
* outval = -155 + exp((f + 15.55) * 0.057))
*
* where frequency f is in MHz. Since we don't have exp in the kernel,
* I approximate this function by a third order polynomial.
*
*/
mutex_lock(&dev->lock);
x = frequency / 160;
outval = (x * x + 2500) / 5000;
outval = (outval * x + 5000) / 10000;
outval -= (10 * x * x + 10433) / 20866;
outval += 4 * x - 11505;
outb_p((outval >> 8) & 0x01, dev->iobase + 4);
outb_p(outval >> 9, dev->iobase + 6);
outb_p(outval & 0xff, dev->iobase + 8);
mutex_unlock(&dev->lock);
return 0;
}
static int typhoon_setfreq(struct typhoon_device *dev, unsigned long frequency)
{
typhoon_setfreq_generic(dev, frequency);
dev->curfreq = frequency;
return 0;
}
static void typhoon_mute(struct typhoon_device *dev)
{
if (dev->muted == 1)
return;
typhoon_setvol_generic(dev, 0);
typhoon_setfreq_generic(dev, dev->mutefreq);
dev->muted = 1;
}
static void typhoon_unmute(struct typhoon_device *dev)
{
if (dev->muted == 0)
return;
typhoon_setfreq_generic(dev, dev->curfreq);
typhoon_setvol_generic(dev, dev->curvol);
dev->muted = 0;
}
static int typhoon_setvol(struct typhoon_device *dev, int vol)
{
if (dev->muted && vol != 0) { /* user is unmuting the card */
dev->curvol = vol;
typhoon_unmute(dev);
return 0;
}
if (vol == dev->curvol) /* requested volume == current */
return 0;
if (vol == 0) { /* volume == 0 means mute the card */
typhoon_mute(dev);
dev->curvol = vol;
return 0;
}
typhoon_setvol_generic(dev, vol);
dev->curvol = vol;
return 0;
}
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
strlcpy(v->driver, "radio-typhoon", sizeof(v->driver));
strlcpy(v->card, "Typhoon Radio", sizeof(v->card));
sprintf(v->bus_info, "ISA");
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER;
return 0;
}
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
if (v->index > 0)
return -EINVAL;
strcpy(v->name, "FM");
v->type = V4L2_TUNER_RADIO;
v->rangelow = (87.5*16000);
v->rangehigh = (108*16000);
v->rxsubchans = V4L2_TUNER_SUB_MONO;
v->capability = V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal = 0xFFFF; /* We can't get the signal strength */
return 0;
}
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
if (v->index > 0)
return -EINVAL;
return 0;
}
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct typhoon_device *typhoon = video_drvdata(file);
typhoon->curfreq = f->frequency;
typhoon_setfreq(typhoon, typhoon->curfreq);
return 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct typhoon_device *typhoon = video_drvdata(file);
f->type = V4L2_TUNER_RADIO;
f->frequency = typhoon->curfreq;
return 0;
}
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
int i;
for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
if (qc->id && qc->id == radio_qctrl[i].id) {
memcpy(qc, &(radio_qctrl[i]),
sizeof(*qc));
return 0;
}
}
return -EINVAL;
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct typhoon_device *typhoon = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = typhoon->muted;
return 0;
case V4L2_CID_AUDIO_VOLUME:
ctrl->value = typhoon->curvol;
return 0;
}
return -EINVAL;
}
static int vidioc_s_ctrl (struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct typhoon_device *typhoon = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value)
typhoon_mute(typhoon);
else
typhoon_unmute(typhoon);
return 0;
case V4L2_CID_AUDIO_VOLUME:
typhoon_setvol(typhoon, ctrl->value);
return 0;
}
return -EINVAL;
}
static int vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
if (a->index > 1)
return -EINVAL;
strcpy(a->name, "Radio");
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
*i = 0;
return 0;
}
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
if (i != 0)
return -EINVAL;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
if (a->index != 0)
return -EINVAL;
return 0;
}
static struct typhoon_device typhoon_unit =
{
.iobase = CONFIG_RADIO_TYPHOON_PORT,
.curfreq = CONFIG_RADIO_TYPHOON_MUTEFREQ,
.mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ,
};
static int typhoon_exclusive_open(struct file *file)
{
return test_and_set_bit(0, &typhoon_unit.in_use) ? -EBUSY : 0;
}
static int typhoon_exclusive_release(struct file *file)
{
clear_bit(0, &typhoon_unit.in_use);
return 0;
}
static const struct v4l2_file_operations typhoon_fops = {
.owner = THIS_MODULE,
.open = typhoon_exclusive_open,
.release = typhoon_exclusive_release,
.ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
};
static struct video_device typhoon_radio = {
.name = "Typhoon Radio",
.fops = &typhoon_fops,
.ioctl_ops = &typhoon_ioctl_ops,
.release = video_device_release_empty,
};
#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
static int typhoon_proc_show(struct seq_file *m, void *v)
{
#ifdef MODULE
#define MODULEPROCSTRING "Driver loaded as a module"
#else
#define MODULEPROCSTRING "Driver compiled into kernel"
#endif
seq_puts(m, BANNER);
seq_puts(m, "Load type: " MODULEPROCSTRING "\n\n");
seq_printf(m, "frequency = %lu kHz\n",
typhoon_unit.curfreq >> 4);
seq_printf(m, "volume = %d\n", typhoon_unit.curvol);
seq_printf(m, "mute = %s\n", typhoon_unit.muted ?
"on" : "off");
seq_printf(m, "iobase = 0x%x\n", typhoon_unit.iobase);
seq_printf(m, "mute frequency = %lu kHz\n",
typhoon_unit.mutefreq >> 4);
return 0;
}
static int typhoon_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, typhoon_proc_show, NULL);
}
static const struct file_operations typhoon_proc_fops = {
.owner = THIS_MODULE,
.open = typhoon_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
#endif /* CONFIG_RADIO_TYPHOON_PROC_FS */
MODULE_AUTHOR("Dr. Henrik Seidel");
MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio).");
MODULE_LICENSE("GPL");
static int io = -1;
static int radio_nr = -1;
module_param(io, int, 0);
MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)");
module_param(radio_nr, int, 0);
#ifdef MODULE
static unsigned long mutefreq;
module_param(mutefreq, ulong, 0);
MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
#endif
static int __init typhoon_init(void)
{
#ifdef MODULE
if (io == -1) {
printk(KERN_ERR "radio-typhoon: You must set an I/O address with io=0x316 or io=0x336\n");
return -EINVAL;
}
typhoon_unit.iobase = io;
if (mutefreq < 87000 || mutefreq > 108500) {
printk(KERN_ERR "radio-typhoon: You must set a frequency (in kHz) used when muting the card,\n");
printk(KERN_ERR "radio-typhoon: e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
return -EINVAL;
}
typhoon_unit.mutefreq = mutefreq;
#endif /* MODULE */
printk(KERN_INFO BANNER);
mutex_init(&typhoon_unit.lock);
io = typhoon_unit.iobase;
if (!request_region(io, 8, "typhoon")) {
printk(KERN_ERR "radio-typhoon: port 0x%x already in use\n",
typhoon_unit.iobase);
return -EBUSY;
}
video_set_drvdata(&typhoon_radio, &typhoon_unit);
if (video_register_device(&typhoon_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 8);
return -EINVAL;
}
printk(KERN_INFO "radio-typhoon: port 0x%x.\n", typhoon_unit.iobase);
printk(KERN_INFO "radio-typhoon: mute frequency is %lu kHz.\n",
typhoon_unit.mutefreq);
typhoon_unit.mutefreq <<= 4;
/* mute card - prevents noisy bootups */
typhoon_mute(&typhoon_unit);
#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
if (!proc_create("driver/radio-typhoon", 0, NULL, &typhoon_proc_fops))
printk(KERN_ERR "radio-typhoon: registering /proc/driver/radio-typhoon failed\n");
#endif
return 0;
}
static void __exit typhoon_cleanup_module(void)
{
#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
remove_proc_entry("driver/radio-typhoon", NULL);
#endif
video_unregister_device(&typhoon_radio);
release_region(io, 8);
}
module_init(typhoon_init);
module_exit(typhoon_cleanup_module);