clk: berlin: add driver for BG2x audio/video PLL
This is a driver for the AVPLLs built upon a VCO with 8 channels each
found on Marvell Berlin2 SoCs. While both VCOs found on BG2/BG2CD share
the same register set, sometimes registers shifts for one of the VCOs
are a bit off. Nothing serious that should require a separate driver,
so deal with both VCOs in a single driver instead.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f30357a..b25a1fe 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -32,6 +32,7 @@
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/
+obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIP04) += hisilicon/
obj-$(CONFIG_ARCH_HIX5HD2) += hisilicon/
diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
new file mode 100644
index 0000000..5905733
--- /dev/null
+++ b/drivers/clk/berlin/Makefile
@@ -0,0 +1 @@
+obj-y += berlin2-avpll.o
diff --git a/drivers/clk/berlin/berlin2-avpll.c b/drivers/clk/berlin/berlin2-avpll.c
new file mode 100644
index 0000000..fd0f26c
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-avpll.c
@@ -0,0 +1,393 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "berlin2-avpll.h"
+
+/*
+ * Berlin2 SoCs comprise up to two PLLs called AVPLL built upon a
+ * VCO with 8 channels each, channel 8 is the odd-one-out and does
+ * not provide mul/div.
+ *
+ * Unfortunately, its registers are not named but just numbered. To
+ * get in at least some kind of structure, we split each AVPLL into
+ * the VCOs and each channel into separate clock drivers.
+ *
+ * Also, here and there the VCO registers are a bit different with
+ * respect to bit shifts. Make sure to add a comment for those.
+ */
+#define NUM_CHANNELS 8
+
+#define AVPLL_CTRL(x) ((x) * 0x4)
+
+#define VCO_CTRL0 AVPLL_CTRL(0)
+/* BG2/BG2CDs VCO_B has an additional shift of 4 for its VCO_CTRL0 reg */
+#define VCO_RESET BIT(0)
+#define VCO_POWERUP BIT(1)
+#define VCO_INTERPOL_SHIFT 2
+#define VCO_INTERPOL_MASK (0xf << VCO_INTERPOL_SHIFT)
+#define VCO_REG1V45_SEL_SHIFT 6
+#define VCO_REG1V45_SEL(x) ((x) << VCO_REG1V45_SEL_SHIFT)
+#define VCO_REG1V45_SEL_1V40 VCO_REG1V45_SEL(0)
+#define VCO_REG1V45_SEL_1V45 VCO_REG1V45_SEL(1)
+#define VCO_REG1V45_SEL_1V50 VCO_REG1V45_SEL(2)
+#define VCO_REG1V45_SEL_1V55 VCO_REG1V45_SEL(3)
+#define VCO_REG1V45_SEL_MASK VCO_REG1V45_SEL(3)
+#define VCO_REG0V9_SEL_SHIFT 8
+#define VCO_REG0V9_SEL_MASK (0xf << VCO_REG0V9_SEL_SHIFT)
+#define VCO_VTHCAL_SHIFT 12
+#define VCO_VTHCAL(x) ((x) << VCO_VTHCAL_SHIFT)
+#define VCO_VTHCAL_0V90 VCO_VTHCAL(0)
+#define VCO_VTHCAL_0V95 VCO_VTHCAL(1)
+#define VCO_VTHCAL_1V00 VCO_VTHCAL(2)
+#define VCO_VTHCAL_1V05 VCO_VTHCAL(3)
+#define VCO_VTHCAL_MASK VCO_VTHCAL(3)
+#define VCO_KVCOEXT_SHIFT 14
+#define VCO_KVCOEXT_MASK (0x3 << VCO_KVCOEXT_SHIFT)
+#define VCO_KVCOEXT_ENABLE BIT(17)
+#define VCO_V2IEXT_SHIFT 18
+#define VCO_V2IEXT_MASK (0xf << VCO_V2IEXT_SHIFT)
+#define VCO_V2IEXT_ENABLE BIT(22)
+#define VCO_SPEED_SHIFT 23
+#define VCO_SPEED(x) ((x) << VCO_SPEED_SHIFT)
+#define VCO_SPEED_1G08_1G21 VCO_SPEED(0)
+#define VCO_SPEED_1G21_1G40 VCO_SPEED(1)
+#define VCO_SPEED_1G40_1G61 VCO_SPEED(2)
+#define VCO_SPEED_1G61_1G86 VCO_SPEED(3)
+#define VCO_SPEED_1G86_2G00 VCO_SPEED(4)
+#define VCO_SPEED_2G00_2G22 VCO_SPEED(5)
+#define VCO_SPEED_2G22 VCO_SPEED(6)
+#define VCO_SPEED_MASK VCO_SPEED(0x7)
+#define VCO_CLKDET_ENABLE BIT(26)
+#define VCO_CTRL1 AVPLL_CTRL(1)
+#define VCO_REFDIV_SHIFT 0
+#define VCO_REFDIV(x) ((x) << VCO_REFDIV_SHIFT)
+#define VCO_REFDIV_1 VCO_REFDIV(0)
+#define VCO_REFDIV_2 VCO_REFDIV(1)
+#define VCO_REFDIV_4 VCO_REFDIV(2)
+#define VCO_REFDIV_3 VCO_REFDIV(3)
+#define VCO_REFDIV_MASK VCO_REFDIV(0x3f)
+#define VCO_FBDIV_SHIFT 6
+#define VCO_FBDIV(x) ((x) << VCO_FBDIV_SHIFT)
+#define VCO_FBDIV_MASK VCO_FBDIV(0xff)
+#define VCO_ICP_SHIFT 14
+/* PLL Charge Pump Current = 10uA * (x + 1) */
+#define VCO_ICP(x) ((x) << VCO_ICP_SHIFT)
+#define VCO_ICP_MASK VCO_ICP(0xf)
+#define VCO_LOAD_CAP BIT(18)
+#define VCO_CALIBRATION_START BIT(19)
+#define VCO_FREQOFFSETn(x) AVPLL_CTRL(3 + (x))
+#define VCO_FREQOFFSET_MASK 0x7ffff
+#define VCO_CTRL10 AVPLL_CTRL(10)
+#define VCO_POWERUP_CH1 BIT(20)
+#define VCO_CTRL11 AVPLL_CTRL(11)
+#define VCO_CTRL12 AVPLL_CTRL(12)
+#define VCO_CTRL13 AVPLL_CTRL(13)
+#define VCO_CTRL14 AVPLL_CTRL(14)
+#define VCO_CTRL15 AVPLL_CTRL(15)
+#define VCO_SYNC1n(x) AVPLL_CTRL(15 + (x))
+#define VCO_SYNC1_MASK 0x1ffff
+#define VCO_SYNC2n(x) AVPLL_CTRL(23 + (x))
+#define VCO_SYNC2_MASK 0x1ffff
+#define VCO_CTRL30 AVPLL_CTRL(30)
+#define VCO_DPLL_CH1_ENABLE BIT(17)
+
+struct berlin2_avpll_vco {
+ struct clk_hw hw;
+ void __iomem *base;
+ u8 flags;
+};
+
+#define to_avpll_vco(hw) container_of(hw, struct berlin2_avpll_vco, hw)
+
+static int berlin2_avpll_vco_is_enabled(struct clk_hw *hw)
+{
+ struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+ u32 reg;
+
+ reg = readl_relaxed(vco->base + VCO_CTRL0);
+ if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+ reg >>= 4;
+
+ return !!(reg & VCO_POWERUP);
+}
+
+static int berlin2_avpll_vco_enable(struct clk_hw *hw)
+{
+ struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+ u32 reg;
+
+ reg = readl_relaxed(vco->base + VCO_CTRL0);
+ if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+ reg |= VCO_POWERUP << 4;
+ else
+ reg |= VCO_POWERUP;
+ writel_relaxed(reg, vco->base + VCO_CTRL0);
+
+ return 0;
+}
+
+static void berlin2_avpll_vco_disable(struct clk_hw *hw)
+{
+ struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+ u32 reg;
+
+ reg = readl_relaxed(vco->base + VCO_CTRL0);
+ if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+ reg &= ~(VCO_POWERUP << 4);
+ else
+ reg &= ~VCO_POWERUP;
+ writel_relaxed(reg, vco->base + VCO_CTRL0);
+}
+
+static u8 vco_refdiv[] = { 1, 2, 4, 3 };
+
+static unsigned long
+berlin2_avpll_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+ u32 reg, refdiv, fbdiv;
+ u64 freq = parent_rate;
+
+ /* AVPLL VCO frequency: Fvco = (Fref / refdiv) * fbdiv */
+ reg = readl_relaxed(vco->base + VCO_CTRL1);
+ refdiv = (reg & VCO_REFDIV_MASK) >> VCO_REFDIV_SHIFT;
+ refdiv = vco_refdiv[refdiv];
+ fbdiv = (reg & VCO_FBDIV_MASK) >> VCO_FBDIV_SHIFT;
+ freq *= fbdiv;
+ do_div(freq, refdiv);
+
+ return (unsigned long)freq;
+}
+
+static const struct clk_ops berlin2_avpll_vco_ops = {
+ .is_enabled = berlin2_avpll_vco_is_enabled,
+ .enable = berlin2_avpll_vco_enable,
+ .disable = berlin2_avpll_vco_disable,
+ .recalc_rate = berlin2_avpll_vco_recalc_rate,
+};
+
+struct clk * __init berlin2_avpll_vco_register(void __iomem *base,
+ const char *name, const char *parent_name,
+ u8 vco_flags, unsigned long flags)
+{
+ struct berlin2_avpll_vco *vco;
+ struct clk_init_data init;
+
+ vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+ if (!vco)
+ return ERR_PTR(-ENOMEM);
+
+ vco->base = base;
+ vco->flags = vco_flags;
+ vco->hw.init = &init;
+ init.name = name;
+ init.ops = &berlin2_avpll_vco_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = flags;
+
+ return clk_register(NULL, &vco->hw);
+}
+
+struct berlin2_avpll_channel {
+ struct clk_hw hw;
+ void __iomem *base;
+ u8 flags;
+ u8 index;
+};
+
+#define to_avpll_channel(hw) container_of(hw, struct berlin2_avpll_channel, hw)
+
+static int berlin2_avpll_channel_is_enabled(struct clk_hw *hw)
+{
+ struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+ u32 reg;
+
+ if (ch->index == 7)
+ return 1;
+
+ reg = readl_relaxed(ch->base + VCO_CTRL10);
+ reg &= VCO_POWERUP_CH1 << ch->index;
+
+ return !!reg;
+}
+
+static int berlin2_avpll_channel_enable(struct clk_hw *hw)
+{
+ struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+ u32 reg;
+
+ reg = readl_relaxed(ch->base + VCO_CTRL10);
+ reg |= VCO_POWERUP_CH1 << ch->index;
+ writel_relaxed(reg, ch->base + VCO_CTRL10);
+
+ return 0;
+}
+
+static void berlin2_avpll_channel_disable(struct clk_hw *hw)
+{
+ struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+ u32 reg;
+
+ reg = readl_relaxed(ch->base + VCO_CTRL10);
+ reg &= ~(VCO_POWERUP_CH1 << ch->index);
+ writel_relaxed(reg, ch->base + VCO_CTRL10);
+}
+
+static const u8 div_hdmi[] = { 1, 2, 4, 6 };
+static const u8 div_av1[] = { 1, 2, 5, 5 };
+
+static unsigned long
+berlin2_avpll_channel_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+ u32 reg, div_av2, div_av3, divider = 1;
+ u64 freq = parent_rate;
+
+ reg = readl_relaxed(ch->base + VCO_CTRL30);
+ if ((reg & (VCO_DPLL_CH1_ENABLE << ch->index)) == 0)
+ goto skip_div;
+
+ /*
+ * Fch = (Fref * sync2) /
+ * (sync1 * div_hdmi * div_av1 * div_av2 * div_av3)
+ */
+
+ reg = readl_relaxed(ch->base + VCO_SYNC1n(ch->index));
+ /* BG2/BG2CDs SYNC1 reg on AVPLL_B channel 1 is shifted by 4 */
+ if (ch->flags & BERLIN2_AVPLL_BIT_QUIRK && ch->index == 0)
+ reg >>= 4;
+ divider = reg & VCO_SYNC1_MASK;
+
+ reg = readl_relaxed(ch->base + VCO_SYNC2n(ch->index));
+ freq *= reg & VCO_SYNC2_MASK;
+
+ /* Channel 8 has no dividers */
+ if (ch->index == 7)
+ goto skip_div;
+
+ /*
+ * HDMI divider start at VCO_CTRL11, bit 7; MSB is enable, lower 2 bit
+ * determine divider.
+ */
+ reg = readl_relaxed(ch->base + VCO_CTRL11) >> 7;
+ reg = (reg >> (ch->index * 3));
+ if (reg & BIT(2))
+ divider *= div_hdmi[reg & 0x3];
+
+ /*
+ * AV1 divider start at VCO_CTRL11, bit 28; MSB is enable, lower 2 bit
+ * determine divider.
+ */
+ if (ch->index == 0) {
+ reg = readl_relaxed(ch->base + VCO_CTRL11);
+ reg >>= 28;
+ } else {
+ reg = readl_relaxed(ch->base + VCO_CTRL12);
+ reg >>= (ch->index-1) * 3;
+ }
+ if (reg & BIT(2))
+ divider *= div_av1[reg & 0x3];
+
+ /*
+ * AV2 divider start at VCO_CTRL12, bit 18; each 7 bits wide,
+ * zero is not a valid value.
+ */
+ if (ch->index < 2) {
+ reg = readl_relaxed(ch->base + VCO_CTRL12);
+ reg >>= 18 + (ch->index * 7);
+ } else if (ch->index < 7) {
+ reg = readl_relaxed(ch->base + VCO_CTRL13);
+ reg >>= (ch->index - 2) * 7;
+ } else {
+ reg = readl_relaxed(ch->base + VCO_CTRL14);
+ }
+ div_av2 = reg & 0x7f;
+ if (div_av2)
+ divider *= div_av2;
+
+ /*
+ * AV3 divider start at VCO_CTRL14, bit 7; each 4 bits wide.
+ * AV2/AV3 form a fractional divider, where only specfic values for AV3
+ * are allowed. AV3 != 0 divides by AV2/2, AV3=0 is bypass.
+ */
+ if (ch->index < 6) {
+ reg = readl_relaxed(ch->base + VCO_CTRL14);
+ reg >>= 7 + (ch->index * 4);
+ } else {
+ reg = readl_relaxed(ch->base + VCO_CTRL15);
+ }
+ div_av3 = reg & 0xf;
+ if (div_av2 && div_av3)
+ freq *= 2;
+
+skip_div:
+ do_div(freq, divider);
+ return (unsigned long)freq;
+}
+
+static const struct clk_ops berlin2_avpll_channel_ops = {
+ .is_enabled = berlin2_avpll_channel_is_enabled,
+ .enable = berlin2_avpll_channel_enable,
+ .disable = berlin2_avpll_channel_disable,
+ .recalc_rate = berlin2_avpll_channel_recalc_rate,
+};
+
+/*
+ * Another nice quirk:
+ * On some production SoCs, AVPLL channels are scrambled with respect
+ * to the channel numbering in the registers but still referenced by
+ * their original channel numbers. We deal with it by having a flag
+ * and a translation table for the index.
+ */
+static const u8 quirk_index[] __initconst = { 0, 6, 5, 4, 3, 2, 1, 7 };
+
+struct clk * __init berlin2_avpll_channel_register(void __iomem *base,
+ const char *name, u8 index, const char *parent_name,
+ u8 ch_flags, unsigned long flags)
+{
+ struct berlin2_avpll_channel *ch;
+ struct clk_init_data init;
+
+ ch = kzalloc(sizeof(*ch), GFP_KERNEL);
+ if (!ch)
+ return ERR_PTR(-ENOMEM);
+
+ ch->base = base;
+ if (ch_flags & BERLIN2_AVPLL_SCRAMBLE_QUIRK)
+ ch->index = quirk_index[index];
+ else
+ ch->index = index;
+
+ ch->flags = ch_flags;
+ ch->hw.init = &init;
+ init.name = name;
+ init.ops = &berlin2_avpll_channel_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = flags;
+
+ return clk_register(NULL, &ch->hw);
+}
diff --git a/drivers/clk/berlin/berlin2-avpll.h b/drivers/clk/berlin/berlin2-avpll.h
new file mode 100644
index 0000000..a37f506
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-avpll.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __BERLIN2_AVPLL_H
+#define __BERLIN2_AVPLL_H
+
+struct clk;
+
+#define BERLIN2_AVPLL_BIT_QUIRK BIT(0)
+#define BERLIN2_AVPLL_SCRAMBLE_QUIRK BIT(1)
+
+struct clk * __init
+berlin2_avpll_vco_register(void __iomem *base, const char *name,
+ const char *parent_name, u8 vco_flags, unsigned long flags);
+
+struct clk * __init
+berlin2_avpll_channel_register(void __iomem *base, const char *name,
+ u8 index, const char *parent_name, u8 ch_flags,
+ unsigned long flags);
+
+#endif /* __BERLIN2_AVPLL_H */