can: c_can: Fix startup logic
c_can_start() enables interrupts way too early. The first enabling
happens when setting the control mode in c_can_chip_config() and then
again at the end of the function.
But that happens before napi_enable() and that means that an interrupt
which comes in will disable interrupts again and call napi_schedule,
which ignores the request and the later napi_enable() is not making
thinks work either. So the interface is up with all device interrupts
disabled.
Move the device interrupt after napi_enable() and add it to the other
callsites of c_can_start() in c_can_set_mode() and c_can_power_up()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index a5c8dcf..b1629a4 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -612,30 +612,22 @@
struct c_can_priv *priv = netdev_priv(dev);
/* enable automatic retransmission */
- priv->write_reg(priv, C_CAN_CTRL_REG,
- CONTROL_ENABLE_AR);
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_ENABLE_AR);
if ((priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) &&
(priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) {
/* loopback + silent mode : useful for hot self-test */
- priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE |
- CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
- priv->write_reg(priv, C_CAN_TEST_REG,
- TEST_LBACK | TEST_SILENT);
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
+ priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK | TEST_SILENT);
} else if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
/* loopback mode : useful for self-test function */
- priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE |
- CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
priv->write_reg(priv, C_CAN_TEST_REG, TEST_LBACK);
} else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) {
/* silent mode : bus-monitoring mode */
- priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_EIE |
- CONTROL_SIE | CONTROL_IE | CONTROL_TEST);
+ priv->write_reg(priv, C_CAN_CTRL_REG, CONTROL_TEST);
priv->write_reg(priv, C_CAN_TEST_REG, TEST_SILENT);
- } else
- /* normal mode*/
- priv->write_reg(priv, C_CAN_CTRL_REG,
- CONTROL_EIE | CONTROL_SIE | CONTROL_IE);
+ }
/* configure message objects */
c_can_configure_msg_objects(dev);
@@ -662,9 +654,6 @@
/* reset tx helper pointers */
priv->tx_next = priv->tx_echo = 0;
- /* enable status change, error and module interrupts */
- c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
-
return 0;
}
@@ -681,6 +670,7 @@
static int c_can_set_mode(struct net_device *dev, enum can_mode mode)
{
+ struct c_can_priv *priv = netdev_priv(dev);
int err;
switch (mode) {
@@ -689,6 +679,8 @@
if (err)
return err;
netif_wake_queue(dev);
+ /* enable status change, error and module interrupts */
+ c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
break;
default:
return -EOPNOTSUPP;
@@ -1184,6 +1176,8 @@
can_led_event(dev, CAN_LED_EVENT_OPEN);
napi_enable(&priv->napi);
+ /* enable status change, error and module interrupts */
+ c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
netif_start_queue(dev);
return 0;
@@ -1281,6 +1275,7 @@
u32 val;
unsigned long time_out;
struct c_can_priv *priv = netdev_priv(dev);
+ int ret;
if (!(dev->flags & IFF_UP))
return 0;
@@ -1307,7 +1302,11 @@
if (time_after(jiffies, time_out))
return -ETIMEDOUT;
- return c_can_start(dev);
+ ret = c_can_start(dev);
+ if (!ret)
+ c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(c_can_power_up);
#endif