[media] anysee: add support for Anysee E7 S2
It is DVB-S/S2 USB box.
* DNBU10512IST NIM
* STV0903 demod
* STV6110 tuner
* Intersil ISL6423 LNB controller
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: info@anysee.com
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 9931ec9..e85304c 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -294,6 +294,8 @@
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_TDA18212 if !MEDIA_TUNER_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
+ select DVB_STV0900 if !DVB_FE_CUSTOMISE
+ select DVB_STV6110 if !DVB_FE_CUSTOMISE
select DVB_ISL6423 if !DVB_FE_CUSTOMISE
help
Say Y here to support the Anysee E30, Anysee E30 Plus or
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index ebcc05b..4dc1ca3 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -38,6 +38,8 @@
#include "zl10353.h"
#include "tda18212.h"
#include "cx24116.h"
+#include "stv0900.h"
+#include "stv6110.h"
#include "isl6423.h"
/* debug */
@@ -308,6 +310,23 @@
.i2c_wr_max = 48,
};
+static struct stv0900_config anysee_stv0900_config = {
+ .demod_address = (0xd0 >> 1),
+ .demod_mode = 0,
+ .xtal = 8000000,
+ .clkmode = 3,
+ .diseqc_mode = 2,
+ .tun1_maddress = 0,
+ .tun1_adc = 1, /* 1 Vpp */
+ .path1_mode = 3,
+};
+
+static struct stv6110_config anysee_stv6110_config = {
+ .i2c_address = (0xc0 >> 1),
+ .mclk = 16000000,
+ .clk_div = 1,
+};
+
static struct isl6423_config anysee_isl6423_config = {
.current_max = SEC_CURRENT_800m,
.curlim = SEC_CURRENT_LIM_OFF,
@@ -386,6 +405,15 @@
* IOD[5] TDA10023 0=disabled
* IOD[6] ZL10353 1=enabled
* IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
+ * PCB: 508S2 (rev0.7)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOF=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
+ *
*/
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
@@ -616,6 +644,24 @@
}
break;
+ case ANYSEE_HW_508S2: /* 19 */
+ /* E7 S2 */
+
+ /* enable transport stream on IOA[7] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
+ if (ret)
+ goto error;
+
+ /* enable DVB-S/S2 demod on IOE[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20);
+ if (ret)
+ goto error;
+
+ /* attach demod */
+ adap->fe = dvb_attach(stv0900_attach, &anysee_stv0900_config,
+ &adap->dev->i2c_adap, 0);
+
+ break;
}
if (!adap->fe) {
@@ -723,6 +769,20 @@
&anysee_tda18212_config);
break;
+ case ANYSEE_HW_508S2: /* 19 */
+ /* E7 S2 */
+
+ /* attach tuner */
+ fe = dvb_attach(stv6110_attach, adap->fe,
+ &anysee_stv6110_config, &adap->dev->i2c_adap);
+
+ if (fe) {
+ /* attach LNB controller */
+ fe = dvb_attach(isl6423_attach, adap->fe,
+ &adap->dev->i2c_adap, &anysee_isl6423_config);
+ }
+
+ break;
default:
fe = NULL;
}
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index c618104..a7673aa 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -67,6 +67,7 @@
#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
#define ANYSEE_HW_508TC 18 /* E7 TC */
+#define ANYSEE_HW_508S2 19 /* E7 S2 */
#define REG_IOA 0x80 /* Port A (bit addressable) */
#define REG_IOB 0x90 /* Port B (bit addressable) */