arch/arm/boot/dts/omap4-sdp.dts - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 /dts-v1/;

 #include "omap443x.dtsi"
 #include "elpida_ecb240abacn.dtsi"

 / {
 	model = "TI OMAP4 SDP board";
 	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";

 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};

 	aliases {
 		display0 = &lcd0;
 		display1 = &lcd1;
 		display2 = &hdmi0;
 	};

 	vdd_eth: fixedregulator-vdd-eth {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio2 16 0>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
 	};

 	vbat: fixedregulator-vbat {
 		compatible = "regulator-fixed";
 		regulator-name = "VBAT";
 		regulator-min-microvolt = <3750000>;
 		regulator-max-microvolt = <3750000>;
 		regulator-boot-on;
 	};

 	leds {
 		compatible = "gpio-leds";
 		debug0 {
 			label = "omap4:green:debug0";
 			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
 		};

 		debug1 {
 			label = "omap4:green:debug1";
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
 		};

 		debug2 {
 			label = "omap4:green:debug2";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
 		};

 		debug3 {
 			label = "omap4:green:debug3";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
 		};

 		debug4 {
 			label = "omap4:green:debug4";
 			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
 		};

 		user1 {
 			label = "omap4:blue:user";
 			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
 		};

 		user2 {
 			label = "omap4:red:user";
 			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
 		};

 		user3 {
 			label = "omap4:green:user";
 			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
 		};
 	};

 	pwmleds {
 		compatible = "pwm-leds";
 		kpad {
 			label = "omap4::keypad";
 			pwms = <&twl_pwm 0 7812500>;
 			max-brightness = <127>;
 		};

 		charging {
 			label = "omap4:green:chrg";
 			pwms = <&twl_pwmled 0 7812500>;
 			max-brightness = <255>;
 		};
 	};

 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&twl_pwm 1 7812500>;
 		brightness-levels = <
 				0 10 20 30 40
 				50 60 70 80 90
 				100 110 120 127
 				>;
 		default-brightness-level = <13>;
 	};

 	sound {
 		compatible = "ti,abe-twl6040";
 		ti,model = "SDP4430";

 		ti,jack-detection = <1>;
 		ti,mclk-freq = <38400000>;

 		ti,mcpdm = <&mcpdm>;
 		ti,dmic = <&dmic>;

 		ti,twl6040 = <&twl6040>;

 		/* Audio routing */
 		ti,audio-routing =
 			"Headset Stereophone", "HSOL",
 			"Headset Stereophone", "HSOR",
 			"Earphone Spk", "EP",
 			"Ext Spk", "HFL",
 			"Ext Spk", "HFR",
 			"Line Out", "AUXL",
 			"Line Out", "AUXR",
 			"Vibrator", "VIBRAL",
 			"Vibrator", "VIBRAR",
 			"HSMIC", "Headset Mic",
 			"Headset Mic", "Headset Mic Bias",
 			"MAINMIC", "Main Handset Mic",
 			"Main Handset Mic", "Main Mic Bias",
 			"SUBMIC", "Sub Handset Mic",
 			"Sub Handset Mic", "Main Mic Bias",
 			"AFML", "Line In",
 			"AFMR", "Line In",
 			"DMic", "Digital Mic",
 			"Digital Mic", "Digital Mic1 Bias";
 	};

 	/* regulator for wl12xx on sdio5 */
 	wl12xx_vmmc: wl12xx_vmmc {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio2 22 0>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};

 	tpd12s015: encoder@0 {
 		compatible = "ti,tpd12s015";

 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
 			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
 			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@0 {
 				reg = <0>;

 				tpd12s015_in: endpoint@0 {
 					remote-endpoint = <&hdmi_out>;
 				};
 			};

 			port@1 {
 				reg = <1>;

 				tpd12s015_out: endpoint@0 {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
 		};
 	};

 	hdmi0: connector@0 {
 		compatible = "hdmi-connector";
 		label = "hdmi";

 		type = "c";

 		port {
 			hdmi_connector_in: endpoint {
 				remote-endpoint = <&tpd12s015_out>;
 			};
 		};
 	};
 };

 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
 			&dss_hdmi_pins
 			&tpd12s015_pins
 	>;

 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
 			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
 			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
 			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
 			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};

 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
 			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
 			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
 			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
 			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};

 	uart4_pins: pinmux_uart4_pins {
 		pinctrl-single,pins = <
 			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
 			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
 		>;
 	};

 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
 			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};

 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
 			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
 			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
 			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
 			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
 			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};

 	dmic_pins: pinmux_dmic_pins {
 		pinctrl-single,pins = <
 			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
 			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
 			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
 			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
 		>;
 	};

 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
 			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
 			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
 			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};

 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
 			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
 			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
 			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
 			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
 		>;
 	};

 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
 			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
 			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
 			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
 			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
 		>;
 	};

 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
 			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
 			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
 			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};

 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
 			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
 			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
 			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};

 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
 			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
 			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};

 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
 			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
 			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};

 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
 			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
 			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};

 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
 			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};

 	/* wl12xx GPIO output for WLAN_EN */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
 			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
 		>;
 	};

 	/* wl12xx GPIO inputs and SDIO pins */
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
 			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
 			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
 			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
 			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
 			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
 			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
 			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };

 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;

 	clock-frequency = <400000>;

 	twl: twl@48 {
 		reg = <0x48>;
 		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 	};

 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
 		reg = <0x4b>;

 		pinctrl-names = "default";
 		pinctrl-0 = <&twl6040_pins>;

 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */

 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
 		enable-active-high;

 		/* regulators for vibra motor */
 		vddvibl-supply = <&vbat>;
 		vddvibr-supply = <&vbat>;

 		vibra {
 			/* Vibra driver, motor resistance parameters */
 			ti,vibldrv-res = <8>;
 			ti,vibrdrv-res = <3>;
 			ti,viblmotor-res = <10>;
 			ti,vibrmotor-res = <10>;
 		};
 	};
 };

 #include "twl6030.dtsi"
 #include "twl6030_omap4.dtsi"

 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;

 	clock-frequency = <400000>;
 };

 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;

 	clock-frequency = <400000>;

 	/*
 	 * Temperature Sensor
 	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
 	 */
 	tmp105@48 {
 		compatible = "ti,tmp105";
 		reg = <0x48>;
 	};

 	/*
 	 * Ambient Light Sensor
 	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
 	 */
 	bh1780@29 {
 		compatible = "rohm,bh1780";
 		reg = <0x29>;
 	};
 };

 &i2c4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c4_pins>;

 	clock-frequency = <400000>;

 	/*
 	 * 3-Axis Digital Compass
 	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
 	 */
 	hmc5843@1e {
 		compatible = "honeywell,hmc5843";
 		reg = <0x1e>;
 	};
 };

 &mcspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;

 	eth@0 {
 		compatible = "ks8851";
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
 		vdd-supply = <&vdd_eth>;
 	};
 };

 &mmc1 {
 	vmmc-supply = <&vmmc>;
 	bus-width = <8>;
 };

 &mmc2 {
 	vmmc-supply = <&vaux1>;
 	bus-width = <8>;
 	ti,non-removable;
 };

 &mmc3 {
 	status = "disabled";
 };

 &mmc4 {
 	status = "disabled";
 };

 &mmc5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;

 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1281";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
 };

 &emif1 {
 	cs1-used;
 	device-handle = <&elpida_ECB240ABACN>;
 };

 &emif2 {
 	cs1-used;
 	device-handle = <&elpida_ECB240ABACN>;
 };

 &keypad {
 	keypad,num-rows = <8>;
 	keypad,num-columns = <8>;
 	linux,keymap = <0x00000012	/* KEY_E */
 			0x00010013	/* KEY_R */
 			0x00020014	/* KEY_T */
 			0x00030066	/* KEY_HOME */
 			0x0004003f	/* KEY_F5 */
 			0x000500f0	/* KEY_UNKNOWN */
 			0x00060017	/* KEY_I */
 			0x0007002a	/* KEY_LEFTSHIFT */
 			0x01000020	/* KEY_D*/
 			0x01010021	/* KEY_F */
 			0x01020022	/* KEY_G */
 			0x010300e7	/* KEY_SEND */
 			0x01040040	/* KEY_F6 */
 			0x010500f0	/* KEY_UNKNOWN */
 			0x01060025	/* KEY_K */
 			0x0107001c	/* KEY_ENTER */
 			0x0200002d	/* KEY_X */
 			0x0201002e	/* KEY_C */
 			0x0202002f	/* KEY_V */
 			0x0203006b	/* KEY_END */
 			0x02040041	/* KEY_F7 */
 			0x020500f0	/* KEY_UNKNOWN */
 			0x02060034	/* KEY_DOT */
 			0x0207003a	/* KEY_CAPSLOCK */
 			0x0300002c	/* KEY_Z */
 			0x0301004e	/* KEY_KPLUS */
 			0x03020030	/* KEY_B */
 			0x0303003b	/* KEY_F1 */
 			0x03040042	/* KEY_F8 */
 			0x030500f0	/* KEY_UNKNOWN */
 			0x03060018	/* KEY_O */
 			0x03070039	/* KEY_SPACE */
 			0x04000011	/* KEY_W */
 			0x04010015	/* KEY_Y */
 			0x04020016	/* KEY_U */
 			0x0403003c	/* KEY_F2 */
 			0x04040073	/* KEY_VOLUMEUP */
 			0x040500f0	/* KEY_UNKNOWN */
 			0x04060026	/* KEY_L */
 			0x04070069	/* KEY_LEFT */
 			0x0500001f	/* KEY_S */
 			0x05010023	/* KEY_H */
 			0x05020024	/* KEY_J */
 			0x0503003d	/* KEY_F3 */
 			0x05040043	/* KEY_F9 */
 			0x05050072	/* KEY_VOLUMEDOWN */
 			0x05060032	/* KEY_M */
 			0x0507006a	/* KEY_RIGHT */
 			0x06000010	/* KEY_Q */
 			0x0601001e	/* KEY_A */
 			0x06020031	/* KEY_N */
 			0x0603009e	/* KEY_BACK */
 			0x0604000e	/* KEY_BACKSPACE */
 			0x060500f0	/* KEY_UNKNOWN */
 			0x06060019	/* KEY_P */
 			0x06070067	/* KEY_UP */
 			0x07000094	/* KEY_PROG1 */
 			0x07010095	/* KEY_PROG2 */
 			0x070200ca	/* KEY_PROG3 */
 			0x070300cb	/* KEY_PROG4 */
 			0x0704003e	/* KEY_F4 */
 			0x070500f0	/* KEY_UNKNOWN */
 			0x07060160	/* KEY_OK */
 			0x0707006c>;	/* KEY_DOWN */
 	linux,input-no-autorepeat;
 };

 &uart2 {
 	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART2_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 };

 &uart3 {
 	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART3_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };

 &uart4 {
 	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
 			       &omap4_pmx_core OMAP4_UART4_RX>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
 };

 &mcbsp1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcbsp1_pins>;
 	status = "okay";
 };

 &mcbsp2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcbsp2_pins>;
 	status = "okay";
 };

 &dmic {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dmic_pins>;
 	status = "okay";
 };

 &mcpdm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcpdm_pins>;
 	status = "okay";
 };

 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };

 &usb_otg_hs {
 	interface-type = <1>;
 	mode = <3>;
 	power = <50>;
 };

 &dss {
 	status = "ok";
 };

 &dsi1 {
 	status = "ok";
 	vdd-supply = <&vcxio>;

 	port {
 		dsi1_out_ep: endpoint {
 			remote-endpoint = <&lcd0_in>;
 			lanes = <0 1 2 3 4 5>;
 		};
 	};

 	lcd0: display {
 		compatible = "tpo,taal", "panel-dsi-cm";
 		label = "lcd0";

 		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */

 		port {
 			lcd0_in: endpoint {
 				remote-endpoint = <&dsi1_out_ep>;
 			};
 		};
 	};
 };

 &dsi2 {
 	status = "ok";
 	vdd-supply = <&vcxio>;

 	port {
 		dsi2_out_ep: endpoint {
 			remote-endpoint = <&lcd1_in>;
 			lanes = <0 1 2 3 4 5>;
 		};
 	};

 	lcd1: display {
 		compatible = "tpo,taal", "panel-dsi-cm";
 		label = "lcd1";

 		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */

 		port {
 			lcd1_in: endpoint {
 				remote-endpoint = <&dsi2_out_ep>;
 			};
 		};
 	};
 };

 &hdmi {
 	status = "ok";
 	vdda-supply = <&vdac>;

 	port {
 		hdmi_out: endpoint {
 			remote-endpoint = <&tpd12s015_in>;
 		};
 	};
 };
	/*
	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/
	/dts-v1/;

	#include "omap443x.dtsi"
	#include "elpida_ecb240abacn.dtsi"

	/ {
	model = "TI OMAP4 SDP board";
	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";

	memory {
	device_type = "memory";
	reg = <0x80000000 0x40000000>; /* 1 GB */
	};

	aliases {
	display0 = &lcd0;
	display1 = &lcd1;
	display2 = &hdmi0;
	};

	vdd_eth: fixedregulator-vdd-eth {
	compatible = "regulator-fixed";
	regulator-name = "VDD_ETH";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	gpio = <&gpio2 16 0>; /* gpio line 48 */
	enable-active-high;
	regulator-boot-on;
	};

	vbat: fixedregulator-vbat {
	compatible = "regulator-fixed";
	regulator-name = "VBAT";
	regulator-min-microvolt = <3750000>;
	regulator-max-microvolt = <3750000>;
	regulator-boot-on;
	};

	leds {
	compatible = "gpio-leds";
	debug0 {
	label = "omap4:green:debug0";
	gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
	};

	debug1 {
	label = "omap4:green:debug1";
	gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
	};

	debug2 {
	label = "omap4:green:debug2";
	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
	};

	debug3 {
	label = "omap4:green:debug3";
	gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
	};

	debug4 {
	label = "omap4:green:debug4";
	gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
	};

	user1 {
	label = "omap4:blue:user";
	gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
	};

	user2 {
	label = "omap4:red:user";
	gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
	};

	user3 {
	label = "omap4:green:user";
	gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
	};
	};

	pwmleds {
	compatible = "pwm-leds";
	kpad {
	label = "omap4::keypad";
	pwms = <&twl_pwm 0 7812500>;
	max-brightness = <127>;
	};

	charging {
	label = "omap4:green:chrg";
	pwms = <&twl_pwmled 0 7812500>;
	max-brightness = <255>;
	};
	};

	backlight {
	compatible = "pwm-backlight";
	pwms = <&twl_pwm 1 7812500>;
	brightness-levels = <
	0 10 20 30 40
	50 60 70 80 90
	100 110 120 127
	>;
	default-brightness-level = <13>;
	};

	sound {
	compatible = "ti,abe-twl6040";
	ti,model = "SDP4430";

	ti,jack-detection = <1>;
	ti,mclk-freq = <38400000>;

	ti,mcpdm = <&mcpdm>;
	ti,dmic = <&dmic>;

	ti,twl6040 = <&twl6040>;

	/* Audio routing */
	ti,audio-routing =
	"Headset Stereophone", "HSOL",
	"Headset Stereophone", "HSOR",
	"Earphone Spk", "EP",
	"Ext Spk", "HFL",
	"Ext Spk", "HFR",
	"Line Out", "AUXL",
	"Line Out", "AUXR",
	"Vibrator", "VIBRAL",
	"Vibrator", "VIBRAR",
	"HSMIC", "Headset Mic",
	"Headset Mic", "Headset Mic Bias",
	"MAINMIC", "Main Handset Mic",
	"Main Handset Mic", "Main Mic Bias",
	"SUBMIC", "Sub Handset Mic",
	"Sub Handset Mic", "Main Mic Bias",
	"AFML", "Line In",
	"AFMR", "Line In",
	"DMic", "Digital Mic",
	"Digital Mic", "Digital Mic1 Bias";
	};

	/* regulator for wl12xx on sdio5 */
	wl12xx_vmmc: wl12xx_vmmc {
	pinctrl-names = "default";
	pinctrl-0 = <&wl12xx_gpio>;
	compatible = "regulator-fixed";
	regulator-name = "vwl1271";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	gpio = <&gpio2 22 0>;
	startup-delay-us = <70000>;
	enable-active-high;
	};

	tpd12s015: encoder@0 {
	compatible = "ti,tpd12s015";

	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
	<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
	<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;

	tpd12s015_in: endpoint@0 {
	remote-endpoint = <&hdmi_out>;
	};
	};

	port@1 {
	reg = <1>;

	tpd12s015_out: endpoint@0 {
	remote-endpoint = <&hdmi_connector_in>;
	};
	};
	};
	};

	hdmi0: connector@0 {
	compatible = "hdmi-connector";
	label = "hdmi";

	type = "c";

	port {
	hdmi_connector_in: endpoint {
	remote-endpoint = <&tpd12s015_out>;
	};
	};
	};
	};

	&omap4_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <
	&dss_hdmi_pins
	&tpd12s015_pins
	>;

	uart2_pins: pinmux_uart2_pins {
	pinctrl-single,pins = <
	0xd8 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart2_cts.uart2_cts */
	0xda (PIN_OUTPUT \| MUX_MODE0) /* uart2_rts.uart2_rts */
	0xdc (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart2_rx.uart2_rx */
	0xde (PIN_OUTPUT \| MUX_MODE0) /* uart2_tx.uart2_tx */
	>;
	};

	uart3_pins: pinmux_uart3_pins {
	pinctrl-single,pins = <
	0x100 (PIN_INPUT_PULLUP \| MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
	0x102 (PIN_OUTPUT \| MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
	0x104 (PIN_INPUT \| MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
	0x106 (PIN_OUTPUT \| MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
	>;
	};

	uart4_pins: pinmux_uart4_pins {
	pinctrl-single,pins = <
	0x11c (PIN_INPUT \| MUX_MODE0) /* uart4_rx.uart4_rx */
	0x11e (PIN_OUTPUT \| MUX_MODE0) /* uart4_tx.uart4_tx */
	>;
	};

	twl6040_pins: pinmux_twl6040_pins {
	pinctrl-single,pins = <
	0xe0 (PIN_OUTPUT \| MUX_MODE3) /* hdq_sio.gpio_127 */
	0x160 (PIN_INPUT \| MUX_MODE0) /* sys_nirq2.sys_nirq2 */
	>;
	};

	mcpdm_pins: pinmux_mcpdm_pins {
	pinctrl-single,pins = <
	0xc6 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
	0xc8 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
	0xca (PIN_INPUT_PULLUP \| MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
	0xcc (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
	0xce (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_clks.abe_clks */
	>;
	};

	dmic_pins: pinmux_dmic_pins {
	pinctrl-single,pins = <
	0xd0 (PIN_OUTPUT \| MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
	0xd2 (PIN_INPUT \| MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
	0xd4 (PIN_INPUT \| MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
	0xd6 (PIN_INPUT \| MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
	>;
	};

	mcbsp1_pins: pinmux_mcbsp1_pins {
	pinctrl-single,pins = <
	0xbe (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
	0xc0 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
	0xc2 (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
	0xc4 (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
	>;
	};

	mcbsp2_pins: pinmux_mcbsp2_pins {
	pinctrl-single,pins = <
	0xb6 (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
	0xb8 (PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
	0xba (PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
	0xbc (PIN_INPUT \| MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
	>;
	};

	mcspi1_pins: pinmux_mcspi1_pins {
	pinctrl-single,pins = <
	0xf2 (PIN_INPUT \| MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
	0xf4 (PIN_INPUT \| MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
	0xf6 (PIN_INPUT \| MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
	0xf8 (PIN_INPUT \| MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
	>;
	};

	dss_hdmi_pins: pinmux_dss_hdmi_pins {
	pinctrl-single,pins = <
	0x5a (PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_cec.hdmi_cec */
	0x5c (PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_scl.hdmi_scl */
	0x5e (PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_sda.hdmi_sda */
	>;
	};

	tpd12s015_pins: pinmux_tpd12s015_pins {
	pinctrl-single,pins = <
	0x22 (PIN_OUTPUT \| MUX_MODE3) /* gpmc_a17.gpio_41 */
	0x48 (PIN_OUTPUT \| MUX_MODE3) /* gpmc_nbe1.gpio_60 */
	0x58 (PIN_INPUT_PULLDOWN \| MUX_MODE3) /* hdmi_hpd.gpio_63 */
	>;
	};

	i2c1_pins: pinmux_i2c1_pins {
	pinctrl-single,pins = <
	0xe2 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
	0xe4 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
	>;
	};

	i2c2_pins: pinmux_i2c2_pins {
	pinctrl-single,pins = <
	0xe6 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
	0xe8 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
	>;
	};

	i2c3_pins: pinmux_i2c3_pins {
	pinctrl-single,pins = <
	0xea (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
	0xec (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
	>;
	};

	i2c4_pins: pinmux_i2c4_pins {
	pinctrl-single,pins = <
	0xee (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_scl */
	0xf0 (PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_sda */
	>;
	};

	/* wl12xx GPIO output for WLAN_EN */
	wl12xx_gpio: pinmux_wl12xx_gpio {
	pinctrl-single,pins = <
	0x3c (PIN_OUTPUT \| MUX_MODE3) /* gpmc_nwp.gpio_54 */
	>;
	};

	/* wl12xx GPIO inputs and SDIO pins */
	wl12xx_pins: pinmux_wl12xx_pins {
	pinctrl-single,pins = <
	0x3a (PIN_INPUT \| MUX_MODE3) /* gpmc_ncs3.gpio_53 */
	0x108 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
	0x10a (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
	0x10c (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
	0x10e (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
	0x110 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
	0x112 (PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
	>;
	};
	};

	&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	twl: twl@48 {
	reg = <0x48>;
	/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
	};

	twl6040: twl@4b {
	compatible = "ti,twl6040";
	reg = <0x4b>;

	pinctrl-names = "default";
	pinctrl-0 = <&twl6040_pins>;

	/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
	interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
	ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */

	vio-supply = <&v1v8>;
	v2v1-supply = <&v2v1>;
	enable-active-high;

	/* regulators for vibra motor */
	vddvibl-supply = <&vbat>;
	vddvibr-supply = <&vbat>;

	vibra {
	/* Vibra driver, motor resistance parameters */
	ti,vibldrv-res = <8>;
	ti,vibrdrv-res = <3>;
	ti,viblmotor-res = <10>;
	ti,vibrmotor-res = <10>;
	};
	};
	};

	#include "twl6030.dtsi"
	#include "twl6030_omap4.dtsi"

	&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <400000>;
	};

	&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;

	/*
	* Temperature Sensor
	* http://www.ti.com/lit/ds/symlink/tmp105.pdf
	*/
	tmp105@48 {
	compatible = "ti,tmp105";
	reg = <0x48>;
	};

	/*
	* Ambient Light Sensor
	* http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
	*/
	bh1780@29 {
	compatible = "rohm,bh1780";
	reg = <0x29>;
	};
	};

	&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_pins>;

	clock-frequency = <400000>;

	/*
	* 3-Axis Digital Compass
	* http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
	*/
	hmc5843@1e {
	compatible = "honeywell,hmc5843";
	reg = <0x1e>;
	};
	};

	&mcspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi1_pins>;

	eth@0 {
	compatible = "ks8851";
	spi-max-frequency = <24000000>;
	reg = <0>;
	interrupt-parent = <&gpio2>;
	interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
	vdd-supply = <&vdd_eth>;
	};
	};

	&mmc1 {
	vmmc-supply = <&vmmc>;
	bus-width = <8>;
	};

	&mmc2 {
	vmmc-supply = <&vaux1>;
	bus-width = <8>;
	ti,non-removable;
	};

	&mmc3 {
	status = "disabled";
	};

	&mmc4 {
	status = "disabled";
	};

	&mmc5 {
	pinctrl-names = "default";
	pinctrl-0 = <&wl12xx_pins>;
	vmmc-supply = <&wl12xx_vmmc>;
	non-removable;
	bus-width = <4>;
	cap-power-off-card;

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
	compatible = "ti,wl1281";
	reg = <2>;
	interrupt-parent = <&gpio1>;
	interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
	ref-clock-frequency = <26000000>;
	tcxo-clock-frequency = <26000000>;
	};
	};

	&emif1 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
	};

	&emif2 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
	};

	&keypad {
	keypad,num-rows = <8>;
	keypad,num-columns = <8>;
	linux,keymap = <0x00000012 /* KEY_E */
	0x00010013 /* KEY_R */
	0x00020014 /* KEY_T */
	0x00030066 /* KEY_HOME */
	0x0004003f /* KEY_F5 */
	0x000500f0 /* KEY_UNKNOWN */
	0x00060017 /* KEY_I */
	0x0007002a /* KEY_LEFTSHIFT */
	0x01000020 /* KEY_D*/
	0x01010021 /* KEY_F */
	0x01020022 /* KEY_G */
	0x010300e7 /* KEY_SEND */
	0x01040040 /* KEY_F6 */
	0x010500f0 /* KEY_UNKNOWN */
	0x01060025 /* KEY_K */
	0x0107001c /* KEY_ENTER */
	0x0200002d /* KEY_X */
	0x0201002e /* KEY_C */
	0x0202002f /* KEY_V */
	0x0203006b /* KEY_END */
	0x02040041 /* KEY_F7 */
	0x020500f0 /* KEY_UNKNOWN */
	0x02060034 /* KEY_DOT */
	0x0207003a /* KEY_CAPSLOCK */
	0x0300002c /* KEY_Z */
	0x0301004e /* KEY_KPLUS */
	0x03020030 /* KEY_B */
	0x0303003b /* KEY_F1 */
	0x03040042 /* KEY_F8 */
	0x030500f0 /* KEY_UNKNOWN */
	0x03060018 /* KEY_O */
	0x03070039 /* KEY_SPACE */
	0x04000011 /* KEY_W */
	0x04010015 /* KEY_Y */
	0x04020016 /* KEY_U */
	0x0403003c /* KEY_F2 */
	0x04040073 /* KEY_VOLUMEUP */
	0x040500f0 /* KEY_UNKNOWN */
	0x04060026 /* KEY_L */
	0x04070069 /* KEY_LEFT */
	0x0500001f /* KEY_S */
	0x05010023 /* KEY_H */
	0x05020024 /* KEY_J */
	0x0503003d /* KEY_F3 */
	0x05040043 /* KEY_F9 */
	0x05050072 /* KEY_VOLUMEDOWN */
	0x05060032 /* KEY_M */
	0x0507006a /* KEY_RIGHT */
	0x06000010 /* KEY_Q */
	0x0601001e /* KEY_A */
	0x06020031 /* KEY_N */
	0x0603009e /* KEY_BACK */
	0x0604000e /* KEY_BACKSPACE */
	0x060500f0 /* KEY_UNKNOWN */
	0x06060019 /* KEY_P */
	0x06070067 /* KEY_UP */
	0x07000094 /* KEY_PROG1 */
	0x07010095 /* KEY_PROG2 */
	0x070200ca /* KEY_PROG3 */
	0x070300cb /* KEY_PROG4 */
	0x0704003e /* KEY_F4 */
	0x070500f0 /* KEY_UNKNOWN */
	0x07060160 /* KEY_OK */
	0x0707006c>; /* KEY_DOWN */
	linux,input-no-autorepeat;
	};

	&uart2 {
	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
	&omap4_pmx_core OMAP4_UART2_RX>;
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
	};

	&uart3 {
	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
	&omap4_pmx_core OMAP4_UART3_RX>;
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
	};

	&uart4 {
	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
	&omap4_pmx_core OMAP4_UART4_RX>;
	pinctrl-names = "default";
	pinctrl-0 = <&uart4_pins>;
	};

	&mcbsp1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp1_pins>;
	status = "okay";
	};

	&mcbsp2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp2_pins>;
	status = "okay";
	};

	&dmic {
	pinctrl-names = "default";
	pinctrl-0 = <&dmic_pins>;
	status = "okay";
	};

	&mcpdm {
	pinctrl-names = "default";
	pinctrl-0 = <&mcpdm_pins>;
	status = "okay";
	};

	&twl_usb_comparator {
	usb-supply = <&vusb>;
	};

	&usb_otg_hs {
	interface-type = <1>;
	mode = <3>;
	power = <50>;
	};

	&dss {
	status = "ok";
	};

	&dsi1 {
	status = "ok";
	vdd-supply = <&vcxio>;

	port {
	dsi1_out_ep: endpoint {
	remote-endpoint = <&lcd0_in>;
	lanes = <0 1 2 3 4 5>;
	};
	};

	lcd0: display {
	compatible = "tpo,taal", "panel-dsi-cm";
	label = "lcd0";

	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */

	port {
	lcd0_in: endpoint {
	remote-endpoint = <&dsi1_out_ep>;
	};
	};
	};
	};

	&dsi2 {
	status = "ok";
	vdd-supply = <&vcxio>;

	port {
	dsi2_out_ep: endpoint {
	remote-endpoint = <&lcd1_in>;
	lanes = <0 1 2 3 4 5>;
	};
	};

	lcd1: display {
	compatible = "tpo,taal", "panel-dsi-cm";
	label = "lcd1";

	reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */

	port {
	lcd1_in: endpoint {
	remote-endpoint = <&dsi2_out_ep>;
	};
	};
	};
	};

	&hdmi {
	status = "ok";
	vdda-supply = <&vdac>;

	port {
	hdmi_out: endpoint {
	remote-endpoint = <&tpd12s015_in>;
	};
	};
	};