qlcnic: update NIC partition interface routines

Refactor 82xx driver to support new adapter
Update routines to support variable number of NIC partitions

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 85adf0d..88084a3 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -91,6 +91,9 @@
 static int qlcnic_vlan_rx_add(struct net_device *, u16);
 static int qlcnic_vlan_rx_del(struct net_device *, u16);
 
+#define QLCNIC_IS_TSO_CAPABLE(adapter)	\
+	((adapter)->ahw->capabilities & QLCNIC_FW_CAPABILITY_TSO)
+
 /*  PCI Device ID Table  */
 #define ENTRY(device) \
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, (device)), \
@@ -369,19 +372,25 @@
 		iounmap(adapter->ahw->pci_base0);
 }
 
-static int
-qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
+static int qlcnic_init_pci_info(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_pci_info *pci_info;
-	int i, ret = 0;
+	int i, ret = 0, j = 0;
+	u16 act_pci_func;
 	u8 pfn;
 
 	pci_info = kcalloc(QLCNIC_MAX_PCI_FUNC, sizeof(*pci_info), GFP_KERNEL);
 	if (!pci_info)
 		return -ENOMEM;
 
+	ret = qlcnic_get_pci_info(adapter, pci_info);
+	if (ret)
+		goto err_pci_info;
+
+	act_pci_func = adapter->ahw->act_pci_func;
+
 	adapter->npars = kzalloc(sizeof(struct qlcnic_npar_info) *
-				QLCNIC_MAX_PCI_FUNC, GFP_KERNEL);
+				 act_pci_func, GFP_KERNEL);
 	if (!adapter->npars) {
 		ret = -ENOMEM;
 		goto err_pci_info;
@@ -394,21 +403,25 @@
 		goto err_npars;
 	}
 
-	ret = qlcnic_get_pci_info(adapter, pci_info);
-	if (ret)
-		goto err_eswitch;
-
 	for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
 		pfn = pci_info[i].id;
+
 		if (pfn >= QLCNIC_MAX_PCI_FUNC) {
 			ret = QL_STATUS_INVALID_PARAM;
 			goto err_eswitch;
 		}
-		adapter->npars[pfn].active = (u8)pci_info[i].active;
-		adapter->npars[pfn].type = (u8)pci_info[i].type;
-		adapter->npars[pfn].phy_port = (u8)pci_info[i].default_port;
-		adapter->npars[pfn].min_bw = pci_info[i].tx_min_bw;
-		adapter->npars[pfn].max_bw = pci_info[i].tx_max_bw;
+
+		if (!pci_info[i].active ||
+		    (pci_info[i].type != QLCNIC_TYPE_NIC))
+			continue;
+
+		adapter->npars[j].pci_func = pfn;
+		adapter->npars[j].active = (u8)pci_info[i].active;
+		adapter->npars[j].type = (u8)pci_info[i].type;
+		adapter->npars[j].phy_port = (u8)pci_info[i].default_port;
+		adapter->npars[j].min_bw = pci_info[i].tx_min_bw;
+		adapter->npars[j].max_bw = pci_info[i].tx_max_bw;
+		j++;
 	}
 
 	for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++)
@@ -436,7 +449,7 @@
 	u32 ref_count;
 	int i, ret = 1;
 	u32 data = QLCNIC_MGMT_FUNC;
-	void __iomem *priv_op = adapter->ahw->pci_base0 + QLCNIC_DRV_OP_MODE;
+	struct qlcnic_hardware_context *ahw = adapter->ahw;
 
 	/* If other drivers are not in use set their privilege level */
 	ref_count = QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE);
@@ -445,21 +458,20 @@
 		goto err_lock;
 
 	if (qlcnic_config_npars) {
-		for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
-			id = i;
-			if (adapter->npars[i].type != QLCNIC_TYPE_NIC ||
-				id == adapter->ahw->pci_func)
+		for (i = 0; i < ahw->act_pci_func; i++) {
+			id = adapter->npars[i].pci_func;
+			if (id == ahw->pci_func)
 				continue;
 			data |= (qlcnic_config_npars &
 					QLC_DEV_SET_DRV(0xf, id));
 		}
 	} else {
-		data = readl(priv_op);
-		data = (data & ~QLC_DEV_SET_DRV(0xf, adapter->ahw->pci_func)) |
+		data = QLCRD32(adapter, QLCNIC_DRV_OP_MODE);
+		data = (data & ~QLC_DEV_SET_DRV(0xf, ahw->pci_func)) |
 			(QLC_DEV_SET_DRV(QLCNIC_MGMT_FUNC,
-			adapter->ahw->pci_func));
+					 ahw->pci_func));
 	}
-	writel(data, priv_op);
+	QLCWR32(adapter, QLCNIC_DRV_OP_MODE, data);
 	qlcnic_api_unlock(adapter);
 err_lock:
 	return ret;
@@ -632,6 +644,7 @@
 	int err;
 	struct qlcnic_info nic_info;
 
+	memset(&nic_info, 0, sizeof(struct qlcnic_info));
 	err = qlcnic_get_nic_info(adapter, &nic_info, adapter->ahw->pci_func);
 	if (err)
 		return err;
@@ -798,8 +811,7 @@
 	return err;
 }
 
-static int
-qlcnic_set_default_offload_settings(struct qlcnic_adapter *adapter)
+static int qlcnic_set_default_offload_settings(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_esw_func_cfg esw_cfg;
 	struct qlcnic_npar_info *npar;
@@ -808,16 +820,16 @@
 	if (adapter->need_fw_reset)
 		return 0;
 
-	for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
-		if (adapter->npars[i].type != QLCNIC_TYPE_NIC)
-			continue;
+	for (i = 0; i < adapter->ahw->act_pci_func; i++) {
 		memset(&esw_cfg, 0, sizeof(struct qlcnic_esw_func_cfg));
-		esw_cfg.pci_func = i;
-		esw_cfg.offload_flags = BIT_0;
+		esw_cfg.pci_func = adapter->npars[i].pci_func;
 		esw_cfg.mac_override = BIT_0;
 		esw_cfg.promisc_mode = BIT_0;
-		if (adapter->ahw->capabilities  & QLCNIC_FW_CAPABILITY_TSO)
-			esw_cfg.offload_flags |= (BIT_1 | BIT_2);
+		if (qlcnic_82xx_check(adapter)) {
+			esw_cfg.offload_flags = BIT_0;
+			if (QLCNIC_IS_TSO_CAPABLE(adapter))
+				esw_cfg.offload_flags |= (BIT_1 | BIT_2);
+		}
 		if (qlcnic_config_switch_port(adapter, &esw_cfg))
 			return -EIO;
 		npar = &adapter->npars[i];
@@ -855,22 +867,24 @@
 	return 0;
 }
 
-static int
-qlcnic_reset_npar_config(struct qlcnic_adapter *adapter)
+static int qlcnic_reset_npar_config(struct qlcnic_adapter *adapter)
 {
 	int i, err;
 	struct qlcnic_npar_info *npar;
 	struct qlcnic_info nic_info;
+	u8 pci_func;
 
-	if (!adapter->need_fw_reset)
-		return 0;
+	if (qlcnic_82xx_check(adapter))
+		if (!adapter->need_fw_reset)
+			return 0;
 
 	/* Set the NPAR config data after FW reset */
-	for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
+	for (i = 0; i < adapter->ahw->act_pci_func; i++) {
 		npar = &adapter->npars[i];
-		if (npar->type != QLCNIC_TYPE_NIC)
-			continue;
-		err = qlcnic_get_nic_info(adapter, &nic_info, i);
+		pci_func = npar->pci_func;
+		memset(&nic_info, 0, sizeof(struct qlcnic_info));
+		err = qlcnic_get_nic_info(adapter,
+					  &nic_info, pci_func);
 		if (err)
 			return err;
 		nic_info.min_tx_bw = npar->min_bw;
@@ -881,11 +895,12 @@
 
 		if (npar->enable_pm) {
 			err = qlcnic_config_port_mirroring(adapter,
-							npar->dest_npar, 1, i);
+							   npar->dest_npar, 1,
+							   pci_func);
 			if (err)
 				return err;
 		}
-		err = qlcnic_reset_eswitch_config(adapter, npar, i);
+		err = qlcnic_reset_eswitch_config(adapter, npar, pci_func);
 		if (err)
 			return err;
 	}