Merge tag 'socfpga-dt-for-3.14' of git://git.rocketboards.org/linux-socfpga-next into next/dt
From Dinh Nguyen:
SOCFPGA DT updates for v3.14
* tag 'socfpga-dt-for-3.14' of git://git.rocketboards.org/linux-socfpga-next:
ARM: dts: socfpga: add pl330 clock
ARM: dts: socfpga: update L2 tag and data latency
Signed-off-by: Kevin Hilman <khilman@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 5fac246..3509707 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -14,6 +14,9 @@
- core-module: the root node to the Integrator platforms must have
a core-module with regs and the compatible string
"arm,core-module-integrator"
+- external-bus-interface: the root node to the Integrator platforms
+ must have an external bus interface with regs and the
+ compatible-string "arm,external-bus-interface"
Required properties for the core module:
- regs: the location and size of the core module registers, one
@@ -48,6 +51,11 @@
reg = <0x10000000 0x200>;
};
+ ebi@12000000 {
+ compatible = "arm,external-bus-interface";
+ reg = <0x12000000 0x100>;
+ };
+
syscon {
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
index ad03121..2742e9c 100644
--- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt
@@ -2,6 +2,7 @@
Required properties:
- compatible: Should be "atmel,<chip>-aic"
+ <chip> can be "at91rm9200" or "sama5d3"
- interrupt-controller: Identifies the node as an interrupt controller.
- interrupt-parent: For single AIC system, it is an empty property.
- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 1196290..d2170e7 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -50,7 +50,8 @@
};
RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91sam9260-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc",
+ "atmel,at91sam9260-sdramc",
"atmel,at91sam9g45-ddramc",
- reg: Should contain registers location and length
For at91sam9263 and at91sam9g45 you must specify 2 entries.
diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt
new file mode 100644
index 0000000..11087ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/moxart.txt
@@ -0,0 +1,12 @@
+MOXA ART device tree bindings
+
+Boards with the MOXA ART SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "moxa,moxart";
+
+Boards:
+
+- UC-7112-LX: embedded computer
+ compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"
diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
index 5039c0a..0ab3251 100644
--- a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
@@ -1,7 +1,12 @@
SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
Properties:
- - name : should be 'sysreg';
- compatible : should contain "samsung,<chip name>-sysreg", "syscon";
For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
- reg : offset and length of the register set.
+
+Example:
+ syscon@10010000 {
+ compatible = "samsung,exynos4-sysreg", "syscon";
+ reg = <0x10010000 0x400>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 1608a54..68ac65f 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -9,6 +9,7 @@
- compatible : Should contain "nvidia,tegra<chip>-pmc".
- reg : Offset and length of the register set for the device
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pclk" (The Tegra clock of that name),
"clk32k_in" (The 32KHz clock input to Tegra).
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
new file mode 100644
index 0000000..cd5e239
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -0,0 +1,339 @@
+Device Tree Clock bindings for arch-at91
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "atmel,at91rm9200-pmc" or
+ "atmel,at91sam9g45-pmc" or
+ "atmel,at91sam9n12-pmc" or
+ "atmel,at91sam9x5-pmc" or
+ "atmel,sama5d3-pmc":
+ at91 PMC (Power Management Controller)
+ All at91 specific clocks (clocks defined below) must be child
+ node of the PMC node.
+
+ "atmel,at91rm9200-clk-main":
+ at91 main oscillator
+
+ "atmel,at91rm9200-clk-master" or
+ "atmel,at91sam9x5-clk-master":
+ at91 master clock
+
+ "atmel,at91sam9x5-clk-peripheral" or
+ "atmel,at91rm9200-clk-peripheral":
+ at91 peripheral clocks
+
+ "atmel,at91rm9200-clk-pll" or
+ "atmel,at91sam9g45-clk-pll" or
+ "atmel,at91sam9g20-clk-pllb" or
+ "atmel,sama5d3-clk-pll":
+ at91 pll clocks
+
+ "atmel,at91sam9x5-clk-plldiv":
+ at91 plla divisor
+
+ "atmel,at91rm9200-clk-programmable" or
+ "atmel,at91sam9g45-clk-programmable" or
+ "atmel,at91sam9x5-clk-programmable":
+ at91 programmable clocks
+
+ "atmel,at91sam9x5-clk-smd":
+ at91 SMD (Soft Modem) clock
+
+ "atmel,at91rm9200-clk-system":
+ at91 system clocks
+
+ "atmel,at91rm9200-clk-usb" or
+ "atmel,at91sam9x5-clk-usb" or
+ "atmel,at91sam9n12-clk-usb":
+ at91 usb clock
+
+ "atmel,at91sam9x5-clk-utmi":
+ at91 utmi clock
+
+Required properties for PMC node:
+- reg : defines the IO memory reserved for the PMC.
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- interrupts : shall be set to PMC interrupt line.
+- interrupt-controller : tell that the PMC is an interrupt controller.
+- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
+ and reflect the bit position in the PMC_ER/DR/SR registers.
+ You can use the dt macros defined in dt-bindings/clk/at91.h.
+ 0 (AT91_PMC_MOSCS) -> main oscillator ready
+ 1 (AT91_PMC_LOCKA) -> PLL A ready
+ 2 (AT91_PMC_LOCKB) -> PLL B ready
+ 3 (AT91_PMC_MCKRDY) -> master clock ready
+ 6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready
+ 8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready
+ 16 (AT91_PMC_MOSCSELS) -> main oscillator selected
+ 17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized
+ 18 (AT91_PMC_CFDEV) -> clock failure detected
+
+For example:
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,sama5d3-pmc";
+ interrupts = <1 4 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ /* put at91 clocks here */
+ };
+
+Required properties for main clock:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<0>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks (optional if clock-frequency is provided) : shall be the slow clock
+ phandle. This clock is used to calculate the main clock rate if
+ "clock-frequency" is not provided.
+- clock-frequency : the main oscillator frequency.Prefer the use of
+ "clock-frequency" over automatic clock rate calculation.
+
+For example:
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ interrupt-parent = <&pmc>;
+ interrupts = <0>;
+ #clock-cells = <0>;
+ clocks = <&ck32k>;
+ clock-frequency = <18432000>;
+ };
+
+Required properties for master clock:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<3>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the master clock sources (see atmel datasheet) phandles.
+ e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>".
+- atmel,clk-output-range : minimum and maximum clock frequency (two u32
+ fields).
+ e.g. output = <0 133000000>; <=> 0 to 133MHz.
+- atmel,clk-divisors : master clock divisors table (four u32 fields).
+ 0 <=> reserved value.
+ e.g. divisors = <1 2 4 6>;
+- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the
+ PRES field as CLOCK_DIV3 (e.g sam9x5).
+
+For example:
+ mck: mck {
+ compatible = "atmel,at91rm9200-clk-master";
+ interrupt-parent = <&pmc>;
+ interrupts = <3>;
+ #clock-cells = <0>;
+ atmel,clk-output-range = <0 133000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+Required properties for peripheral clocks:
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- clocks : shall be the master clock phandle.
+ e.g. clocks = <&mck>;
+- name: device tree node describing a specific system clock.
+ * #clock-cells : from common clock binding; shall be set to 0.
+ * reg: peripheral id. See Atmel's datasheets to get a full
+ list of peripheral ids.
+ * atmel,clk-output-range : minimum and maximum clock frequency
+ (two u32 fields). Only valid on at91sam9x5-clk-peripheral
+ compatible IPs.
+
+For example:
+ periph: periphck {
+ compatible = "atmel,at91sam9x5-clk-peripheral";
+ #size-cells = <0>;
+ #address-cells = <1>;
+ clocks = <&mck>;
+
+ ssc0_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ atmel,clk-output-range = <0 133000000>;
+ };
+
+ usart0_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+ };
+
+
+Required properties for pll clocks:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<1>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the main clock phandle.
+- reg : pll id.
+ 0 -> PLL A
+ 1 -> PLL B
+- atmel,clk-input-range : minimum and maximum source clock frequency (two u32
+ fields).
+ e.g. input = <1 32000000>; <=> 1 to 32MHz.
+- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output
+ range description. Sould be set to 2, 3
+ or 4.
+ * 1st and 2nd cells represent the frequency range (min-max).
+ * 3rd cell is optional and represents the OUT field value for the given
+ range.
+ * 4th cell is optional and represents the ICPLL field (PLLICPR
+ register)
+- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter
+ depending on #atmel,pll-output-range-cells
+ property value.
+
+For example:
+ plla: pllack {
+ compatible = "atmel,at91sam9g45-clk-pll";
+ interrupt-parent = <&pmc>;
+ interrupts = <1>;
+ #clock-cells = <0>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <2000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <74500000 800000000 0 0
+ 69500000 750000000 1 0
+ 64500000 700000000 2 0
+ 59500000 650000000 3 0
+ 54500000 600000000 0 1
+ 49500000 550000000 1 1
+ 44500000 500000000 2 1
+ 40000000 450000000 3 1>;
+ };
+
+Required properties for plldiv clocks (plldiv = pll / 2):
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the plla clock phandle.
+
+The pll divisor is equal to 2 and cannot be changed.
+
+For example:
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+Required properties for programmable clocks:
+- interrupt-parent : must reference the PMC node.
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- clocks : shall be the programmable clock source phandles.
+ e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+- name: device tree node describing a specific prog clock.
+ * #clock-cells : from common clock binding; shall be set to 0.
+ * reg : programmable clock id (register offset from PCKx
+ register).
+ * interrupts : shall be set to "<(8 + id)>".
+
+For example:
+ prog: progck {
+ compatible = "atmel,at91sam9g45-clk-programmable";
+ #size-cells = <0>;
+ #address-cells = <1>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <8>;
+ };
+
+ prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <9>;
+ };
+ };
+
+
+Required properties for smd clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the smd clock source phandles.
+ e.g. clocks = <&plladiv>, <&utmi>;
+
+For example:
+ smd: smdck {
+ compatible = "atmel,at91sam9x5-clk-smd";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+Required properties for system clocks:
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- name: device tree node describing a specific system clock.
+ * #clock-cells : from common clock binding; shall be set to 0.
+ * reg: system clock id (bit position in SCER/SCDR/SCSR registers).
+ See Atmel's datasheet to get a full list of system clock ids.
+
+For example:
+ system: systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddrck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+ };
+
+
+Required properties for usb clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the smd clock source phandles.
+ e.g. clocks = <&pllb>;
+- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"):
+ usb clock divisor table.
+ e.g. divisors = <1 2 4 0>;
+
+For example:
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&pllb>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+
+Required properties for utmi clock:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the main clock source phandle.
+
+For example:
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <0>;
+ clocks = <&main>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
index 0c80c26..9acea9d 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
@@ -15,6 +15,9 @@
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra114-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
@@ -23,6 +26,7 @@
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
new file mode 100644
index 0000000..ded5d62
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
@@ -0,0 +1,63 @@
+NVIDIA Tegra124 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra124-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra124-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA124_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <112400000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
index fcfed5b..6c5901b 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -15,6 +15,9 @@
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra20-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
@@ -23,6 +26,7 @@
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
index 0f71408..63618cd 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -15,6 +15,9 @@
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra30-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
@@ -23,6 +26,7 @@
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
usb@c5004000 {
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
new file mode 100644
index 0000000..952e373
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt
@@ -0,0 +1,28 @@
+* Renesas CPG DIV6 Clock
+
+The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+Generator (CPG). They clock input is divided by a configurable factor from 1
+to 64.
+
+Required Properties:
+
+ - compatible: Must be one of the following
+ - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
+ - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks
+ - "renesas,cpg-div6-clock" for generic DIV6 clocks
+ - reg: Base address and length of the memory resource used by the DIV6 clock
+ - clocks: Reference to the parent clock
+ - #clock-cells: Must be 0
+ - clock-output-names: The name of the clock as a free-form string
+
+
+Example
+-------
+
+ sd2_clk: sd2_clk@e6150078 {
+ compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150078 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd2";
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
new file mode 100644
index 0000000..a6a352c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -0,0 +1,51 @@
+* Renesas CPG Module Stop (MSTP) Clocks
+
+The CPG can gate SoC device clocks. The gates are organized in groups of up to
+32 gates.
+
+This device tree binding describes a single 32 gate clocks group per node.
+Clocks are referenced by user nodes by the MSTP node phandle and the clock
+index in the group, from 0 to 31.
+
+Required Properties:
+
+ - compatible: Must be one of the following
+ - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
+ - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+ - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
+ - reg: Base address and length of the I/O mapped registers used by the MSTP
+ clocks. The first register is the clock control register and is mandatory.
+ The second register is the clock status register and is optional when not
+ implemented in hardware.
+ - clocks: Reference to the parent clocks, one per output clock. The parents
+ must appear in the same order as the output clocks.
+ - #clock-cells: Must be 1
+ - clock-output-names: The name of the clocks as free-form strings
+ - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+
+The clocks, clock-output-names and renesas,indices properties contain one
+entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
+gate clocks must not be declared.
+
+
+Example
+-------
+
+ #include <dt-bindings/clock/r8a7790-clock.h>
+
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
+ <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
+ <&mmc0_clk>;
+ #clock-cells = <1>;
+ clock-output-names =
+ "tpu0", "mmcif1", "sdhi3", "sdhi2",
+ "sdhi1", "sdhi0", "mmcif0";
+ renesas,clock-indices = <
+ R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+ R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
+ R8A7790_CLK_MMCIF0
+ >;
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
new file mode 100644
index 0000000..7b41c2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -0,0 +1,32 @@
+* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+ - compatible: Must be one of
+ - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
+ - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+ - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
+
+ - reg: Base address and length of the memory resource used by the CPG
+
+ - clocks: Reference to the parent clock
+ - #clock-cells: Must be 1
+ - clock-output-names: The names of the clocks. Supported clocks are "main",
+ "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
+
+
+Example
+-------
+
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7790-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0, "pll1", "pll3",
+ "lb", "qspi", "sdh", "sd0", "sd1", "z";
+ };
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
index a8c21c2..1f5729f 100644
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -50,6 +50,9 @@
0x00000008: Use fixed channel:
Use automatic channel selection when unset
Use DMA request line number when set
+ 0x00000010: Set channel as high priority:
+ Normal priority when unset
+ High priority when set
Example:
diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
index 90fa7da..c6908e7 100644
--- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
+++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
@@ -5,6 +5,16 @@
- reg: Should contain DMA registers location and length. This shuld include
all of the per-channel registers.
- interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+ client nodes' dmas properties. The specifier represents the DMA request
+ select value for the peripheral. For more details, consult the Tegra TRM's
+ documentation of the APB DMA channel control register REQ_SEL field.
Examples:
@@ -27,4 +37,8 @@
0 149 0x04
0 150 0x04
0 151 0x04 >;
+ clocks = <&tegra_car 34>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
};
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
index b4fa934..ab45c02 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
@@ -9,6 +9,12 @@
- #size-cells: The number of cells used to represent the size of an address
range in the host1x address space. Should be 1.
- ranges: The mapping of the host1x address space to the CPU address space.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - host1x
The host1x top-level node defines a number of children, each representing one
of the following host1x client modules:
@@ -19,6 +25,12 @@
- compatible: "nvidia,tegra<chip>-mpe"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - mpe
- vi: video input
@@ -26,6 +38,12 @@
- compatible: "nvidia,tegra<chip>-vi"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - vi
- epp: encoder pre-processor
@@ -33,6 +51,12 @@
- compatible: "nvidia,tegra<chip>-epp"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - epp
- isp: image signal processor
@@ -40,6 +64,12 @@
- compatible: "nvidia,tegra<chip>-isp"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - isp
- gr2d: 2D graphics engine
@@ -47,12 +77,30 @@
- compatible: "nvidia,tegra<chip>-gr2d"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - 2d
- gr3d: 3D graphics engine
Required properties:
- compatible: "nvidia,tegra<chip>-gr3d"
- reg: Physical base address and length of the controller's registers.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ (This property may be omitted if the only clock in the list is "3d")
+ - 3d
+ This MUST be the first entry.
+ - 3d2 (Only required on SoCs with two 3D clocks)
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - 3d
+ - 3d2 (Only required on SoCs with two 3D clocks)
- dc: display controller
@@ -60,6 +108,16 @@
- compatible: "nvidia,tegra<chip>-dc"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - dc
+ This MUST be the first entry.
+ - parent
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - dc
Each display controller node has a child node, named "rgb", that represents
the RGB output associated with the controller. It can take the following
@@ -76,6 +134,16 @@
- interrupts: The interrupt outputs from the controller.
- vdd-supply: regulator for supply voltage
- pll-supply: regulator for PLL
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - hdmi
+ This MUST be the first entry.
+ - parent
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - hdmi
Optional properties:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
@@ -88,12 +156,24 @@
- compatible: "nvidia,tegra<chip>-tvo"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
+ - clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
- dsi: display serial interface
Required properties:
- compatible: "nvidia,tegra<chip>-dsi"
- reg: Physical base address and length of the controller's registers.
+ - clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+ - dsi
+ This MUST be the first entry.
+ - parent
+ - resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+ - dsi
Example:
@@ -105,6 +185,9 @@
reg = <0x50000000 0x00024000>;
interrupts = <0 65 0x04 /* mpcore syncpt */
0 67 0x04>; /* mpcore general */
+ clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+ resets = <&tegra_car 28>;
+ reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
@@ -115,41 +198,64 @@
compatible = "nvidia,tegra20-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <0 68 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_MPE>;
+ resets = <&tegra_car 60>;
+ reset-names = "mpe";
};
vi {
compatible = "nvidia,tegra20-vi";
reg = <0x54080000 0x00040000>;
interrupts = <0 69 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_VI>;
+ resets = <&tegra_car 100>;
+ reset-names = "vi";
};
epp {
compatible = "nvidia,tegra20-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <0 70 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_EPP>;
+ resets = <&tegra_car 19>;
+ reset-names = "epp";
};
isp {
compatible = "nvidia,tegra20-isp";
reg = <0x54100000 0x00040000>;
interrupts = <0 71 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_ISP>;
+ resets = <&tegra_car 23>;
+ reset-names = "isp";
};
gr2d {
compatible = "nvidia,tegra20-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <0 72 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+ resets = <&tegra_car 21>;
+ reset-names = "2d";
};
gr3d {
compatible = "nvidia,tegra20-gr3d";
reg = <0x54180000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+ resets = <&tegra_car 24>;
+ reset-names = "3d";
};
dc@54200000 {
compatible = "nvidia,tegra20-dc";
reg = <0x54200000 0x00040000>;
interrupts = <0 73 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
+ clock-names = "disp1", "parent";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
rgb {
status = "disabled";
@@ -160,6 +266,11 @@
compatible = "nvidia,tegra20-dc";
reg = <0x54240000 0x00040000>;
interrupts = <0 74 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+ <&tegra_car TEGRA20_CLK_PLL_P>;
+ clock-names = "disp2", "parent";
+ resets = <&tegra_car 26>;
+ reset-names = "dc";
rgb {
status = "disabled";
@@ -170,6 +281,11 @@
compatible = "nvidia,tegra20-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <0 75 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+ clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
status = "disabled";
};
@@ -177,12 +293,18 @@
compatible = "nvidia,tegra20-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <0 76 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_TVO>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra20-dsi";
reg = <0x54300000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_DSI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+ clock-names = "dsi", "parent";
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
status = "disabled";
};
};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
index ef77cc7..87507e9 100644
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -39,12 +39,23 @@
- interrupts: Should contain I2C controller interrupts.
- address-cells: Address cells for I2C device address.
- size-cells: Size of the I2C device address.
-- clocks: Clock ID as per
- Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
- for I2C controller.
-- clock-names: Name of the clock:
- Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
- Tegra114 I2C controller: "div-clk".
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ Tegra20/Tegra30:
+ - div-clk
+ - fast-clk
+ Tegra114:
+ - div-clk
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - i2c
+- dmas: Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+ - rx
+ - tx
Example:
@@ -56,5 +67,9 @@
#size-cells = <0>;
clocks = <&tegra_car 12>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 12>;
+ reset-names = "i2c";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
index 2995fae..0382b8b 100644
--- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -13,6 +13,12 @@
array of pin numbers which is used as column.
- linux,keymap: The keymap for keys as described in the binding document
devicetree/bindings/input/matrix-keymap.txt.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - kbc
Optional properties, in addition to those specified by the shared
matrix-keyboard bindings:
@@ -31,6 +37,9 @@
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
interrupts = <0 85 0x04>;
+ clocks = <&tegra_car 36>;
+ resets = <&tegra_car 36>;
+ reset-names = "kbc";
nvidia,ghost-filter;
nvidia,debounce-delay-ms = <640>;
nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index c67b975..532b1d4 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -16,6 +16,8 @@
specific extensions.
- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
specific extensions.
+ - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
+ specific extensions.
* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index c6d7b11..f357c16 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -8,6 +8,12 @@
Required properties:
- compatible : Should be "nvidia,<chip>-sdhci"
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - sdhci
Optional properties:
- power-gpios : Specify GPIOs for power control
@@ -18,6 +24,9 @@
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = <47>;
+ clocks = <&tegra_car 14>;
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
diff --git a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
index 5aeee53..5ae601e 100644
--- a/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
+++ b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
@@ -7,3 +7,15 @@
- clock-frequency : the frequency of the i2c bus
- gpios : the gpio used for ec request
- slave-addr: the i2c address of the slave controller
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ Tegra20/Tegra30:
+ - div-clk
+ - fast-clk
+ Tegra114:
+ - div-clk
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - i2c
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index 6b75107..24cee06 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -42,14 +42,19 @@
- 0xc2000000: prefetchable memory region
Please refer to the standard PCI bus binding document for a more detailed
explanation.
-- clocks: List of clock inputs of the controller. Must contain an entry for
- each entry in the clock-names property.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- "pex": The Tegra clock of that name
- "afi": The Tegra clock of that name
- "pcie_xclk": The Tegra clock of that name
- "pll_e": The Tegra clock of that name
- "cml": The Tegra clock of that name (not required for Tegra20)
+ - pex
+ - afi
+ - pll_e
+ - cml (not required for Tegra20)
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - pex
+ - afi
+ - pcie_x
Root ports are defined as subnodes of the PCIe controller node.
@@ -91,9 +96,10 @@
0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */
0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
- clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
- <&tegra_car 118>;
- clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+ clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
+ clock-names = "pex", "afi", "pll_e";
+ resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
new file mode 100644
index 0000000..fd653bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
@@ -0,0 +1,23 @@
+* Freescale IMX25 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE_CMOS (0 << 3)
+PAD_CTL_ODE_OPENDRAIN (1 << 3)
+PAD_CTL_DSE_NOMINAL (0 << 1)
+PAD_CTL_DSE_HIGH (1 << 1)
+PAD_CTL_DSE_MAX (2 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx25-pinfunc.h in device tree source folder for all available
+imx25 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
index 353eca0..d1706ea 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
@@ -52,12 +52,25 @@
CONFIG can be 0 or 1, meaning Pullup disable/enable.
+The iomux controller has gpio child nodes which are embedded in the iomux
+control registers. They have to be defined as child nodes of the iomux device
+node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges"
+properties for the iomux device node are required.
Example:
iomuxc: iomuxc@10015000 {
compatible = "fsl,imx27-iomuxc";
reg = <0x10015000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@10015000 {
+ ...
+ };
+
+ ...
uart {
pinctrl_uart1: uart-1 {
@@ -83,6 +96,15 @@
iomuxc: iomuxc@10015000 {
compatible = "fsl,imx27-iomuxc";
reg = <0x10015000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@10015000 {
+ ...
+ };
+
+ ...
uart {
pinctrl_uart1: uart-1 {
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8x74-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8x74-pinctrl.txt
new file mode 100644
index 0000000..70ab78f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8x74-pinctrl.txt
@@ -0,0 +1,92 @@
+Qualcomm MSM8x74 TLMM block
+
+Required properties:
+- compatible: "qcom,msm8x74-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+ The first cell is the gpio pin number and the
+ second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+ pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+
+Non-empty subnodes must specify the 'pins' property.
+Note that not all properties are valid for all pins.
+
+
+Valid values for qcom,pins are:
+ gpio0-gpio145
+ Supports mux, bias and drive-strength
+
+ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data
+ Supports bias and drive-strength
+
+Valid values for qcom,function are:
+ blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus
+
+ (Note that this is not yet the complete list of functions)
+
+
+
+Example:
+
+ msmgpio: pinctrl@fd510000 {
+ compatible = "qcom,msm8x74-pinctrl";
+ reg = <0xfd510000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_default>;
+
+ uart2_default: uart2_default {
+ mux {
+ qcom,pins = "gpio4", "gpio5";
+ qcom,function = "blsp_uart2";
+ };
+
+ tx {
+ qcom,pins = "gpio4";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ qcom,pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index d5dac7b..35d2e1f 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -26,6 +26,11 @@
- #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
otherwise. Should be 3.
+ - interrupts-extended: Specify the interrupts associated with external
+ IRQ pins. This property is mandatory when the PFC handles GPIOs and
+ forbidden otherwise. When specified, it must contain one interrupt per
+ external IRQ, sorted by external IRQ number.
+
The PFC node also acts as a container for pin configuration nodes. Please refer
to pinctrl-bindings.txt in this directory for the definition of the term "pin
configuration node" and for the common pinctrl bindings used by client devices.
@@ -103,6 +108,15 @@
<0xe605801c 0x1c>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts-extended =
+ <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+ <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+ <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+ <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+ <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+ <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+ <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
};
Example 2: A GPIO LED node that references a GPIO
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
index c3fc57a..c7ea9d4 100644
--- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -7,6 +7,12 @@
- reg: physical base address and length of the controller's registers
- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
the cells format.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - pwm
Example:
@@ -14,4 +20,7 @@
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
+ clocks = <&tegra_car 17>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
};
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
index 93f45e9..652d1ff 100644
--- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
@@ -9,6 +9,8 @@
- compatible : should be "nvidia,tegra20-rtc".
- reg : Specifies base physical address and size of the registers.
- interrupts : A single interrupt specifier.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
Example:
@@ -16,4 +18,5 @@
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
index 392a449..845850c 100644
--- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -4,8 +4,17 @@
- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
- reg: Should contain UART controller registers location and length.
- interrupts: Should contain UART controller interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this UART controller.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - serial
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
Optional properties:
- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
@@ -18,7 +27,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
- nvidia,dma-request-selector = <&apbdma 8>;
nvidia,enable-modem-interrupt;
+ clocks = <&tegra_car 6>;
+ resets = <&tegra_car 6>;
+ reset-names = "serial";
+ dmas = <&apbdma 8>, <&apbdma 8>;
+ dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
index 8b8903e..57f40f9 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
@@ -3,10 +3,11 @@
Required properties:
- compatible : "nvidia,tegra-audio-alc5632"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
index dc62249..7788808 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
@@ -3,10 +3,11 @@
Required properties:
- compatible : "nvidia,tegra-audio-rt5640"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
index aab6ce0..96f6a57 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
@@ -3,10 +3,11 @@
Required properties:
- compatible : "nvidia,tegra-audio-wm8753"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index 4b44dfb..b795d28 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -3,10 +3,11 @@
Required properties:
- compatible : "nvidia,tegra-audio-wm8903"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
index ad589b1..436f6cd 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
@@ -3,10 +3,11 @@
Required properties:
- compatible : "nvidia,tegra-audio-wm9712"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
index c145497..eaf0010 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
@@ -4,19 +4,33 @@
- compatible : "nvidia,tegra20-ac97"
- reg : Should contain AC97 controller registers location and length
- interrupts : Should contain AC97 interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for the AC97 controller
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - ac97
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO used to reset the external AC97 codec
- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO corresponding with the AC97 DAP _FS line
+
Example:
ac97@70002000 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <0 81 0x04>;
- nvidia,dma-request-selector = <&apbdma 12>;
nvidia,codec-reset-gpio = <&gpio 170 0>;
nvidia,codec-sync-gpio = <&gpio 120 0>;
+ clocks = <&tegra_car 3>;
+ resets = <&tegra_car 3>;
+ reset-names = "ac97";
+ dmas = <&apbdma 12>, <&apbdma 12>;
+ dma-names = "rx", "tx";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
index 0df2b5c..dc30c6b 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
@@ -4,8 +4,17 @@
- compatible : "nvidia,tegra20-i2s"
- reg : Should contain I2S registers location and length
- interrupts : Should contain I2S interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this I2S controller
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - i2s
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
Example:
@@ -13,5 +22,9 @@
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 45 >;
- nvidia,dma-request-selector = < &apbdma 2 >;
+ clocks = <&tegra_car 11>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
+ dmas = <&apbdma 21>, <&apbdma 21>;
+ dma-names = "rx", "tx";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 0e5c12c..946e2ac 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -7,18 +7,48 @@
- Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
- Tegra114 requires an additional entry, for the APBIF2 register block.
- interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
- entry contains the Tegra DMA controller's phandle and request selector.
- If a single entry is present, the request selectors for the channels are
- assumed to be contiguous, and increment from this value.
- If multiple values are given, one value must be given per channel.
-- clocks : Must contain an entry for each required entry in clock-names.
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
- dam1, dam2, spdif_in.
- - Tegra114: Additionally requires amx, adx.
+ - d_audio
+ - apbif
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ Tegra30 and later:
+ - d_audio
+ - apbif
+ - i2s0
+ - i2s1
+ - i2s2
+ - i2s3
+ - i2s4
+ - dam0
+ - dam1
+ - dam2
+ - spdif
+ Tegra114 and later additionally require:
+ - amx
+ - adx
+ Tegra124 and later additionally require:
+ - amx1
+ - adx1
+ - afc0
+ - afc1
+ - afc2
+ - afc3
+ - afc4
+ - afc5
- ranges : The bus address mapping for the configlink register bus.
Can be empty since the mapping is 1:1.
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx0 .. rx<n>
+ - tx0 .. tx<n>
+ ... where n is:
+ Tegra30: 3
+ Tegra114, Tegra124: 9
- #address-cells : For the configlink bus. Should be <1>;
- #size-cells : For the configlink bus. Should be <1>.
@@ -35,13 +65,20 @@
reg = <0x70080000 0x200 0x70080200 0x100>;
interrupts = < 0 103 0x04 >;
nvidia,dma-request-selector = <&apbdma 1>;
- clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+ clocks = <&tegra_car 106>, <&tegra_car 107>;
+ clock-names = "d_audio", "apbif";
+ resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
- <&tegra_car 110>, <&tegra_car 162>;
- clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ <&tegra_car 110>, <&tegra_car 10>;
+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
- "spdif_in";
+ "spdif";
+ dmas = <&apbdma 1>, <&apbdma 1>;
+ <&apbdma 2>, <&apbdma 2>;
+ <&apbdma 3>, <&apbdma 3>;
+ <&apbdma 4>, <&apbdma 4>;
+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
ranges;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
index dfa6c03..0c113ff 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
@@ -3,13 +3,22 @@
Required properties:
- compatible : "nvidia,tegra30-i2s"
- reg : Should contain I2S registers location and length
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - i2s
- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
Example:
-i2s@70002800 {
+i2s@70080300 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
+ clocks = <&tegra_car 11>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
};
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
index 91ff771..7ea701e 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -4,10 +4,19 @@
- compatible : should be "nvidia,tegra114-spi".
- reg: Should contain SPI registers location and length.
- interrupts: Should contain SPI interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this SPI controller.
-- This is also require clock named "spi" as per binding document
- Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names : Must include the following entries:
+ - spi
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - spi
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
Recommended properties:
- spi-max-frequency: Definition as per
@@ -18,9 +27,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
- nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&tegra_car 44>;
+ clock-names = "spi";
+ resets = <&tegra_car 44>;
+ reset-names = "spi";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
index 7b53da5..bdf08e6 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
@@ -4,8 +4,17 @@
- compatible : should be "nvidia,tegra20-sflash".
- reg: Should contain SFLASH registers location and length.
- interrupts: Should contain SFLASH interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this SFLASH controller.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - spi
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
Recommended properties:
- spi-max-frequency: Definition as per
@@ -17,10 +26,13 @@
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
interrupts = <0 39 0x04>;
- nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&tegra_car 43>;
+ resets = <&tegra_car 43>;
+ reset-names = "spi";
+ dmas = <&apbdma 11>, <&apbdma 11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
-
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
index eefe15e..5db9144 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -4,8 +4,17 @@
- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
- reg: Should contain SLINK registers location and length.
- interrupts: Should contain SLINK interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this SLINK controller.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - spi
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
Recommended properties:
- spi-max-frequency: Definition as per
@@ -17,10 +26,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
- nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&tegra_car 44>;
+ resets = <&tegra_car 44>;
+ reset-names = "spi";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
-
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
index e019fdc..4a864bd 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
@@ -8,6 +8,8 @@
- compatible : should be "nvidia,tegra20-timer".
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 4 interrupts; one per timer channel.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
Example:
@@ -18,4 +20,5 @@
0 1 0x04
0 41 0x04
0 42 0x04>;
+ clocks = <&tegra_car 132>;
};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
index 906109d..b5082a1 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
@@ -10,6 +10,8 @@
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 6 interrupts; one per each of timer channels 1
through 5, and one for the shared interrupt for the remaining channels.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
timer {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
@@ -20,4 +22,5 @@
0 42 0x04
0 121 0x04
0 122 0x04>;
+ clocks = <&tegra_car 214>;
};
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
index b5a86d2..167d5da 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
@@ -31,38 +31,58 @@
7: ..
i: Local Timer Interrupt n
-Example 1: In this example, the system uses only the first global timer
- interrupt generated by MCT and the remaining three global timer
- interrupts are unused. Two local timer interrupts have been
- specified.
+ For MCT block that uses a per-processor interrupt for local timers, such
+ as ones compatible with "samsung,exynos4412-mct", only one local timer
+ interrupt might be specified, meaning that all local timers use the same
+ per processor interrupt.
+
+Example 1: In this example, the IP contains two local timers, using separate
+ interrupts, so two local timer interrupts have been specified,
+ in addition to four global timer interrupts.
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
<0 42 0>, <0 48 0>;
};
-Example 2: In this example, the MCT global and local timer interrupts are
- connected to two separate interrupt controllers. Hence, an
- interrupt-map is created to map the interrupts to the respective
- interrupt controllers.
+Example 2: In this example, the timer interrupts are connected to two separate
+ interrupt controllers. Hence, an interrupt-map is created to map
+ the interrupts to the respective interrupt controllers.
mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
- interrupt-controller;
- #interrups-cells = <2>;
interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
mct_map: mct-map {
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0x0 0 &combiner 23 3>,
- <0x4 0 &gic 0 120 0>,
- <0x5 0 &gic 0 121 0>;
+ interrupt-map = <0 &gic 0 57 0>,
+ <1 &gic 0 69 0>,
+ <2 &combiner 12 6>,
+ <3 &combiner 12 7>,
+ <4 &gic 0 42 0>,
+ <5 &gic 0 48 0>;
};
};
+
+Example 3: In this example, the IP contains four local timers, but using
+ a per-processor interrupt to handle them. Either all the local
+ timer interrupts can be specified, with the same interrupt specifier
+ value or just the first one.
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+
+ /* Both ways are possible in this case. Either: */
+ interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+ <0 42 0>;
+ /* or: */
+ interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+ <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/keystone-phy.txt b/Documentation/devicetree/bindings/usb/keystone-phy.txt
new file mode 100644
index 0000000..f37b3a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/keystone-phy.txt
@@ -0,0 +1,20 @@
+TI Keystone USB PHY
+
+Required properties:
+ - compatible: should be "ti,keystone-usbphy".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property.
+ - reg : Address and length of the usb phy control register set.
+
+The main purpose of this PHY driver is to enable the USB PHY reference clock
+gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just
+an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3
+phy node in the USB Glue layer driver node.
+
+usb_phy: usb_phy@2620738 {
+ compatible = "ti,keystone-usbphy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2620738 32>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
new file mode 100644
index 0000000..60527d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -0,0 +1,42 @@
+TI Keystone Soc USB Controller
+
+DWC3 GLUE
+
+Required properties:
+ - compatible: should be "ti,keystone-dwc3".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property.
+ - reg : Address and length of the register set for the USB subsystem on
+ the SOC.
+ - interrupts : The irq number of this device that is used to interrupt the
+ MPU.
+ - ranges: allows valid 1:1 translation between child's address space and
+ parent's address space.
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: names of clocks correseponding to IDs in the clock property.
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Keystone DWC3 glue.
+- dwc3 :
+ The binding details of dwc3 can be found in:
+ Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+ usb: usb@2680000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2680000 0x10000>;
+ clocks = <&clkusb>;
+ clock-names = "usb";
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ status = "disabled";
+
+ dwc3@2690000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x2690000 0x70000>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ usb-phy = <&usb_phy>, <&usb_phy>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
index df09330..3dc9140 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -8,7 +8,12 @@
Required properties :
- compatible : Should be "nvidia,tegra20-ehci".
- nvidia,phy : phandle of the PHY that the controller is connected to.
- - clocks : Contains a single entry which defines the USB controller's clock.
+ - clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+ - resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+ - usb
Optional properties:
- nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1f1a7e..483d316 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -644,8 +644,9 @@
stack and controls some vital subsystems
(clock and power control, etc).
-config ARCH_SHMOBILE
- bool "Renesas SH-Mobile / R-Mobile"
+config ARCH_SHMOBILE_LEGACY
+ bool "Renesas SH-Mobile / R-Mobile (non-multiplatform)"
+ select ARCH_SHMOBILE
select ARM_PATCH_PHYS_VIRT
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
@@ -660,7 +661,8 @@
select PM_GENERIC_DOMAINS if PM
select SPARSE_IRQ
help
- Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
+ Support for Renesas's SH-Mobile and R-Mobile ARM platforms using
+ a non-multiplatform kernel.
config ARCH_RPC
bool "RiscPC"
@@ -1611,7 +1613,7 @@
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
ARCH_S5PV210 || ARCH_EXYNOS4
default AT91_TIMER_HZ if ARCH_AT91
- default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
+ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
@@ -1796,8 +1798,8 @@
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE
- range 11 64 if ARCH_SHMOBILE
+ int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
+ range 11 64 if ARCH_SHMOBILE_LEGACY
default "12" if SOC_AM33XX
default "9" if SA1111
default "11"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c99b108..1edf8eb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -190,7 +190,6 @@
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
-machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index e7190bb..f54d5a2 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -64,7 +64,7 @@
endif
endif
-ifeq ($(CONFIG_ARCH_SHMOBILE),y)
+ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
OBJS += head-shmobile.o
endif
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a6..21fdbbe 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -30,6 +30,7 @@
dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
# sam9x5
dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
@@ -40,6 +41,8 @@
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
+
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
@@ -59,10 +62,12 @@
exynos4412-odroidx.dtb \
exynos4412-origen.dtb \
exynos4412-smdk4412.dtb \
+ exynos4412-tiny4412.dtb \
exynos4412-trats2.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5420-arndale-octa.dtb \
exynos5420-smdk5420.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb
@@ -85,11 +90,13 @@
kirkwood-iomega_ix2_200.dtb \
kirkwood-is2.dtb \
kirkwood-km_kirkwood.dtb \
+ kirkwood-laplug.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
kirkwood-netgear_readynas_duo_v2.dtb \
+ kirkwood-netgear_readynas_nv+_v2.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
kirkwood-ns2max.dtb \
@@ -104,6 +111,7 @@
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
+dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
@@ -114,6 +122,7 @@
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
+ armada-xp-netgear-rn2120.dtb \
armada-xp-matrix.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += \
@@ -216,7 +225,7 @@
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
@@ -255,6 +264,7 @@
sun4i-a10-hackberry.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a13-olinuxino.dtb \
+ sun5i-a13-olinuxino-micro.dtb \
sun6i-a31-colombus.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 3a1de9e..3c4f6d9 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -90,34 +90,19 @@
nand-on-flash-bbt;
status = "okay";
- at91bootstrap@0 {
- label = "at91bootstrap";
- reg = <0x0 0x8000>;
- };
-
- barebox@8000 {
+ barebox@0 {
label = "barebox";
- reg = <0x8000 0x40000>;
+ reg = <0x0 0x58000>;
};
- bareboxenv@48000 {
- label = "bareboxenv";
- reg = <0x48000 0x8000>;
+ u_boot_env@58000 {
+ label = "u_boot_env";
+ reg = <0x58000 0x8000>;
};
- user_block@0x50000 {
- label = "user_block";
- reg = <0x50000 0xb0000>;
- };
-
- kernel@100000 {
- label = "kernel";
- reg = <0x100000 0x1b0000>;
- };
-
- root@2b0000 {
- label = "root";
- reg = <0x2b0000 0x1D50000>;
+ ubi@60000 {
+ label = "ubi";
+ reg = <0x60000 0x1FA0000>;
};
};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 2471d9d..944e878 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -74,13 +74,13 @@
green_pwr_led {
label = "mirabox:green:pwr";
gpios = <&gpio1 31 1>;
- linux,default-trigger = "heartbeat";
+ default-state = "keep";
};
blue_stat_led {
label = "mirabox:blue:stat";
gpios = <&gpio2 0 1>;
- linux,default-trigger = "cpu0";
+ default-state = "off";
};
green_stat_led {
@@ -139,6 +139,27 @@
reg = <0x25>;
};
};
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x400000>;
+ };
+ partition@400000 {
+ label = "Linux";
+ reg = <0x400000 0x400000>;
+ };
+ partition@800000 {
+ label = "Filesystem";
+ reg = <0x800000 0x3f800000>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 8ac2ac1..651aeb5 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -11,6 +11,8 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
@@ -62,6 +64,7 @@
marvell,pins = "mpp57";
marvell,function = "gpio";
};
+
sata1_led_pin: sata1-led-pin {
marvell,pins = "mpp15";
marvell,function = "gpio";
@@ -77,6 +80,21 @@
marvell,function = "gpio";
};
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
poweroff: poweroff {
marvell,pins = "mpp8";
marvell,function = "gpio";
@@ -84,7 +102,7 @@
};
mdio {
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
};
@@ -104,6 +122,11 @@
clock-frequency = <100000>;
status = "okay";
+ isl12057: isl12057@68 {
+ compatible = "isl,isl12057";
+ reg = <0x68>;
+ };
+
g762: g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
@@ -113,82 +136,116 @@
pwm_polarity = <0>;
};
};
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>; /* 1.5MB */
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>; /* 128KB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>; /* 6MB */
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x400000>; /* 4MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@c00000 {
+ label = "ubifs";
+ reg = <0x0c00000 0x7400000>; /* 116MB */
+ };
+ };
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- g762_clk: fixedclk {
+ g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
- gpio_leds {
+ gpio-leds {
compatible = "gpio-leds";
- pinctrl-0 = < &power_led_pin
- &sata1_led_pin
- &sata2_led_pin
- &backup_led_pin >;
+ pinctrl-0 = <&power_led_pin
+ &sata1_led_pin
+ &sata2_led_pin
+ &backup_led_pin>;
pinctrl-names = "default";
- blue_power_led {
+ blue-power-led {
label = "rn102:blue:pwr";
- gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */
- linux,default-trigger = "heartbeat";
+ gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
- green_sata1_led {
+ green-sata1-led {
label = "rn102:green:sata1";
- gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green_sata2_led {
+ green-sata2-led {
label = "rn102:green:sata2";
- gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green_backup_led {
+ green-backup-led {
label = "rn102:green:backup";
- gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */
+ gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
+ pinctrl-0 = <&power_button_pin
+ &reset_button_pin
+ &backup_button_pin>;
+ pinctrl-names = "default";
- button@1 {
+ power-button {
label = "Power Button";
- linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio1 30 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
- button@2 {
+ reset-button {
label = "Reset Button";
- linux,code = <0x198>; /* KEY_RESTART */
- gpios = <&gpio0 6 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
- button@3 {
+ backup-button {
label = "Backup Button";
- linux,code = <133>; /* KEY_COPY */
- gpios = <&gpio1 26 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
};
- gpio_poweroff {
+ gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
-
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index b0b32f5..4e27587 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -11,6 +11,8 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
@@ -58,12 +60,12 @@
marvell,function = "gpio";
};
- backup_key_pin: backup-key-pin {
+ backup_button_pin: backup-button-pin {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
- power_key_pin: power-key-pin {
+ power_button_pin: power-button-pin {
marvell,pins = "mpp62";
marvell,function = "gpio";
};
@@ -78,18 +80,18 @@
marvell,function = "gpio";
};
- reset_key_pin: reset-key-pin {
+ reset_button_pin: reset-button-pin {
marvell,pins = "mpp65";
marvell,function = "gpio";
};
};
mdio {
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
- phy1: ethernet-phy@1 {
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
reg = <1>;
};
};
@@ -115,6 +117,11 @@
clock-frequency = <100000>;
status = "okay";
+ isl12057: isl12057@68 {
+ compatible = "isl,isl12057";
+ reg = <0x68>;
+ };
+
g762: g762@3e {
compatible = "gmt,g762";
reg = <0x3e>;
@@ -123,71 +130,133 @@
fan_startv = <1>;
pwm_polarity = <0>;
};
+
+ pca9554: pca9554@23 {
+ compatible = "nxp,pca9554";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x23>;
+ };
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>; /* 1.5MB */
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>; /* 128KB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>; /* 6MB */
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x400000>; /* 4MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@c00000 {
+ label = "ubifs";
+ reg = <0x0c00000 0x7400000>; /* 116MB */
+ };
};
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- g762_clk: fixedclk {
+ g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
};
};
- gpio_leds {
+ gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&backup_led_pin &power_led_pin>;
pinctrl-names = "default";
- blue_backup_led {
+ blue-backup-led {
label = "rn104:blue:backup";
- gpios = <&gpio1 31 0>; /* GPIO 63 Active High */
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- blue_power_led {
+ blue-power-led {
label = "rn104:blue:pwr";
- gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "keep";
};
+
+ blue-sata1-led {
+ label = "rn104:blue:sata1";
+ gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ blue-sata2-led {
+ label = "rn104:blue:sata2";
+ gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ blue-sata3-led {
+ label = "rn104:blue:sata3";
+ gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ blue-sata4-led {
+ label = "rn104:blue:sata4";
+ gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&backup_key_pin
- &power_key_pin
- &reset_key_pin>;
+ pinctrl-0 = <&backup_button_pin
+ &power_button_pin
+ &reset_button_pin>;
pinctrl-names = "default";
- button@1 {
+ backup-button {
label = "Backup Button";
- linux,code = <133>; /* KEY_COPY */
- gpios = <&gpio1 20 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
};
- button@2 {
+ power-button {
label = "Power Button";
- linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio1 30 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
- button@3 {
+ reset-button {
label = "Reset Button";
- linux,code = <0x198>; /* KEY_RESTART */
- gpios = <&gpio2 1 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
};
- gpio_poweroff {
+ gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff>;
pinctrl-names = "default";
- gpios = <&gpio1 28 1>;
+ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index f81810a..abbb807 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -104,6 +104,27 @@
gpios = <&gpio0 6 1>;
};
};
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 7f10f62..b6b2539 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -103,22 +103,52 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
- mbusc: mbus-controller@20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ rtc@10300 {
+ compatible = "marvell,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <50>;
};
- mpic: interrupt-controller@20000 {
- compatible = "marvell,mpic";
- #interrupt-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
- msi-controller;
+ spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10600 0x28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <30>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
};
- coherency-fabric@20200 {
- compatible = "marvell,coherency-fabric";
- reg = <0x20200 0xb0>, <0x21010 0x1c>;
+ spi1: spi@10680 {
+ compatible = "marvell,orion-spi";
+ reg = <0x10680 0x28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <92>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <31>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <32>;
+ timeout-ms = <1000>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
};
serial@12000 {
@@ -146,81 +176,29 @@
clock-output-names = "nand";
};
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ mpic: interrupt-controller@20000 {
+ compatible = "marvell,mpic";
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
+ coherency-fabric@20200 {
+ compatible = "marvell,coherency-fabric";
+ reg = <0x20200 0xb0>, <0x21010 0x1c>;
+ };
+
timer@20300 {
reg = <0x20300 0x30>, <0x21040 0x30>;
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
};
- sata@a0000 {
- compatible = "marvell,orion-sata";
- reg = <0xa0000 0x5000>;
- interrupts = <55>;
- clocks = <&gateclk 15>, <&gateclk 30>;
- clock-names = "0", "1";
- status = "disabled";
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
- reg = <0x72004 0x4>;
- };
-
- eth0: ethernet@70000 {
- compatible = "marvell,armada-370-neta";
- reg = <0x70000 0x4000>;
- interrupts = <8>;
- clocks = <&gateclk 4>;
- status = "disabled";
- };
-
- eth1: ethernet@74000 {
- compatible = "marvell,armada-370-neta";
- reg = <0x74000 0x4000>;
- interrupts = <10>;
- clocks = <&gateclk 3>;
- status = "disabled";
- };
-
- i2c0: i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <31>;
- timeout-ms = <1000>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- i2c1: i2c@11100 {
- compatible = "marvell,mv64xxx-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <32>;
- timeout-ms = <1000>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- rtc@10300 {
- compatible = "marvell,orion-rtc";
- reg = <0x10300 0x20>;
- interrupts = <50>;
- };
-
- mvsdio@d4000 {
- compatible = "marvell,orion-sdio";
- reg = <0xd4000 0x200>;
- interrupts = <54>;
- clocks = <&gateclk 17>;
- bus-width = <4>;
- cap-sdio-irq;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- status = "disabled";
- };
-
usb@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x500>;
@@ -235,28 +213,59 @@
status = "disabled";
};
- spi0: spi@10600 {
- compatible = "marvell,orion-spi";
- reg = <0x10600 0x28>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <30>;
- clocks = <&coreclk 0>;
+ eth0: ethernet@70000 {
+ compatible = "marvell,armada-370-neta";
+ reg = <0x70000 0x4000>;
+ interrupts = <8>;
+ clocks = <&gateclk 4>;
status = "disabled";
};
- spi1: spi@10680 {
- compatible = "marvell,orion-spi";
- reg = <0x10680 0x28>;
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- cell-index = <1>;
- interrupts = <92>;
- clocks = <&coreclk 0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0x72004 0x4>;
+ };
+
+ eth1: ethernet@74000 {
+ compatible = "marvell,armada-370-neta";
+ reg = <0x74000 0x4000>;
+ interrupts = <10>;
+ clocks = <&gateclk 3>;
status = "disabled";
};
+ sata@a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x5000>;
+ interrupts = <55>;
+ clocks = <&gateclk 15>, <&gateclk 30>;
+ clock-names = "0", "1";
+ status = "disabled";
+ };
+
+ nand@d0000 {
+ compatible = "marvell,armada370-nand";
+ reg = <0xd0000 0x54>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <113>;
+ clocks = <&coredivclk 0>;
+ status = "disabled";
+ };
+
+ mvsdio@d4000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0xd4000 0x200>;
+ interrupts = <54>;
+ clocks = <&gateclk 17>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 7a4b82e..0d8530c 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -91,11 +91,6 @@
};
internal-regs {
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x100>;
- };
-
L2: l2-cache {
compatible = "marvell,aurora-outer-cache";
reg = <0x08000 0x1000>;
@@ -103,8 +98,17 @@
wt-override;
};
- interrupt-controller@20000 {
- reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+ i2c0: i2c@11000 {
+ reg = <0x11000 0x20>;
+ };
+
+ i2c1: i2c@11100 {
+ reg = <0x11100 0x20>;
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x100>;
};
pinctrl {
@@ -163,9 +167,11 @@
interrupts = <91>;
};
- timer@20300 {
- compatible = "marvell,armada-370-timer";
- clocks = <&coreclk 2>;
+ gateclk: clock-gating-control@18220 {
+ compatible = "marvell,armada-370-gating-clock";
+ reg = <0x18220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
};
coreclk: mvebu-sar@18230 {
@@ -174,11 +180,28 @@
#clock-cells = <1>;
};
- gateclk: clock-gating-control@18220 {
- compatible = "marvell,armada-370-gating-clock";
- reg = <0x18220 0x4>;
+ thermal@18300 {
+ compatible = "marvell,armada370-thermal";
+ reg = <0x18300 0x4
+ 0x18304 0x4>;
+ status = "okay";
+ };
+
+ interrupt-controller@20000 {
+ reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+ };
+
+ timer@20300 {
+ compatible = "marvell,armada-370-timer";
+ clocks = <&coreclk 2>;
+ };
+
+ usb@50000 {
clocks = <&coreclk 0>;
- #clock-cells = <1>;
+ };
+
+ usb@51000 {
+ clocks = <&coreclk 0>;
};
xor@60800 {
@@ -218,29 +241,6 @@
dmacap,memset;
};
};
-
- i2c0: i2c@11000 {
- reg = <0x11000 0x20>;
- };
-
- i2c1: i2c@11100 {
- reg = <0x11100 0x20>;
- };
-
- usb@50000 {
- clocks = <&coreclk 0>;
- };
-
- usb@51000 {
- clocks = <&coreclk 0>;
- };
-
- thermal@18300 {
- compatible = "marvell,armada370-thermal";
- reg = <0x18300 0x4
- 0x18304 0x4>;
- status = "okay";
- };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 2298e4a..274e2ad 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -175,6 +175,14 @@
spi-max-frequency = <108000000>;
};
};
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
new file mode 100644
index 0000000..ff049ee
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -0,0 +1,327 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "NETGEAR ReadyNAS 2120";
+ compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Connected to first Marvell 88SE9170 SATA controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected to second Marvell 88SE9170 SATA controller */
+ pcie@2,0 {
+ /* Port 0, Lane 1 */
+ status = "okay";
+ };
+
+ /* Connected to Fresco Logic FL1009 USB 3.0 controller */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ pinctrl {
+ poweroff: poweroff {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ sata1_led_pin: sata1-led-pin {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ sata2_led_pin: sata2-led-pin {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ sata3_led_pin: sata3-led-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ sata4_led_pin: sata4-led-pin {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ sata1_power_pin: sata1-power-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ sata2_power_pin: sata2-power-pin {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+
+ sata3_power_pin: sata3-power-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ sata4_power_pin: sata4-power-pin {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ sata3_pres_pin: sata3-pres-pin {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ sata4_pres_pin: sata4-pres-pin {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ err_led_pin: err-led-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ clocks = <&coreclk 0>;
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ /* Front USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ clock-frequency = <400000>;
+ status = "okay";
+
+ isl12057: isl12057@68 {
+ compatible = "isl,isl12057";
+ reg = <0x68>;
+ };
+
+ /* Controller for rear fan #1 of 3 (Protechnic
+ * MGT4012XB-O20, 8000RPM) near eSATA port */
+ g762_fan1: g762@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>; /* input clock */
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
+
+ /* Controller for rear (center) fan #2 of 3 */
+ g762_fan2: g762@48 {
+ compatible = "gmt,g762";
+ reg = <0x48>;
+ clocks = <&g762_clk>; /* input clock */
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
+
+ /* Controller for rear fan #3 of 3 */
+ g762_fan3: g762@49 {
+ compatible = "gmt,g762";
+ reg = <0x49>;
+ clocks = <&g762_clk>; /* input clock */
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
+
+ /* Temperature sensor */
+ g751: g751@4c {
+ compatible = "gmt,g751";
+ reg = <0x4c>;
+ };
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>; /* 1.5MB */
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>; /* 128KB */
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>; /* 6MB */
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x400000>; /* 4MB */
+ };
+
+ /* Last MB is for the BBT, i.e. not writable */
+ partition@c00000 {
+ label = "ubifs";
+ reg = <0x0c00000 0x7400000>; /* 116MB */
+ };
+ };
+ };
+ };
+
+ clocks {
+ g762_clk: g762-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+ &sata3_led_pin &sata4_led_pin>;
+ pinctrl-names = "default";
+
+ red-sata1-led {
+ label = "rn2120:red:sata1";
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red-sata2-led {
+ label = "rn2120:red:sata2";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red-sata3-led {
+ label = "rn2120:red:sata3";
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red-sata4-led {
+ label = "rn2120:red:sata4";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red-err-led {
+ label = "rn2120:red:err";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&power_button_pin &reset_button_pin>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset-button {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 5695afc..99bcf76 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -103,8 +103,7 @@
green_led {
label = "green_led";
gpios = <&gpio1 21 1>;
- default-state = "off";
- linux,default-trigger = "heartbeat";
+ default-state = "keep";
};
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 281c644..b8b84a2 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -42,13 +42,14 @@
wt-override;
};
- interrupt-controller@20000 {
- reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ i2c0: i2c@11000 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x100>;
};
- armada-370-xp-pmsu@22000 {
- compatible = "marvell,armada-370-xp-pmsu";
- reg = <0x22100 0x430>, <0x20800 0x20>;
+ i2c1: i2c@11100 {
+ compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x100>;
};
serial@12200 {
@@ -68,23 +69,9 @@
status = "disabled";
};
- timer@20300 {
- compatible = "marvell,armada-xp-timer";
- clocks = <&coreclk 2>, <&refclk>;
- clock-names = "nbclk", "fixed";
- };
-
- coreclk: mvebu-sar@18230 {
- compatible = "marvell,armada-xp-core-clock";
- reg = <0x18230 0x08>;
- #clock-cells = <1>;
- };
-
- cpuclk: clock-complex@18700 {
- #clock-cells = <1>;
- compatible = "marvell,armada-xp-cpu-clock";
- reg = <0x18700 0xA0>;
- clocks = <&coreclk 1>;
+ system-controller@18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x500>;
};
gateclk: clock-gating-control@18220 {
@@ -94,9 +81,39 @@
#clock-cells = <1>;
};
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x500>;
+ coreclk: mvebu-sar@18230 {
+ compatible = "marvell,armada-xp-core-clock";
+ reg = <0x18230 0x08>;
+ #clock-cells = <1>;
+ };
+
+ thermal@182b0 {
+ compatible = "marvell,armadaxp-thermal";
+ reg = <0x182b0 0x4
+ 0x184d0 0x4>;
+ status = "okay";
+ };
+
+ cpuclk: clock-complex@18700 {
+ #clock-cells = <1>;
+ compatible = "marvell,armada-xp-cpu-clock";
+ reg = <0x18700 0xA0>;
+ clocks = <&coreclk 1>;
+ };
+
+ interrupt-controller@20000 {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ };
+
+ timer@20300 {
+ compatible = "marvell,armada-xp-timer";
+ clocks = <&coreclk 2>, <&refclk>;
+ clock-names = "nbclk", "fixed";
+ };
+
+ armada-370-xp-pmsu@22000 {
+ compatible = "marvell,armada-370-xp-pmsu";
+ reg = <0x22100 0x400>, <0x20800 0x20>;
};
eth2: ethernet@30000 {
@@ -107,6 +124,22 @@
status = "disabled";
};
+ usb@50000 {
+ clocks = <&gateclk 18>;
+ };
+
+ usb@51000 {
+ clocks = <&gateclk 19>;
+ };
+
+ usb@52000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x52000 0x500>;
+ interrupts = <47>;
+ clocks = <&gateclk 20>;
+ status = "disabled";
+ };
+
xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
@@ -146,39 +179,6 @@
dmacap,memset;
};
};
-
- i2c0: i2c@11000 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c@11100 {
- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
- usb@50000 {
- clocks = <&gateclk 18>;
- };
-
- usb@51000 {
- clocks = <&gateclk 19>;
- };
-
- usb@52000 {
- compatible = "marvell,orion-ehci";
- reg = <0x52000 0x500>;
- interrupts = <47>;
- clocks = <&gateclk 20>;
- status = "disabled";
- };
-
- thermal@182b0 {
- compatible = "marvell,armadaxp-thermal";
- reg = <0x182b0 0x4
- 0x184d0 0x4>;
- status = "okay";
- };
};
};
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
new file mode 100644
index 0000000..2093c4d
--- /dev/null
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -0,0 +1,122 @@
+/*
+ * at91-cosino.dtsi - Device Tree file for Cosino core module
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ * HCE Engineering
+ *
+ * Derived from at91sam9x5ek.dtsi by:
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91sam9g35.dtsi"
+
+/ {
+ model = "HCE Cosino core module";
+ compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0008000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_slot0_clk_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@f801c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f8010000 {
+ status = "okay";
+ };
+
+ adc0: adc@f804c000 {
+ atmel,adc-clock-rate = <1000000>;
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc; /* Enable PMECC */
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0x80000>;
+ };
+
+ ubootenv@c0000 {
+ label = "U-Boot Env";
+ reg = <0xc0000 0x140000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
new file mode 100644
index 0000000..f9415dd
--- /dev/null
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -0,0 +1,84 @@
+/*
+ * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
+ * Mega 2560 extension
+ *
+ * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it>
+ * HCE Engineering
+ *
+ * Derived from at91sam9g35ek.dts by:
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+#include "at91-cosino.dtsi"
+
+/ {
+ model = "HCE Cosino Mega 2560";
+ compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ ahb {
+ apb {
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ adc0: adc@f804c000 {
+ atmel,adc-clock-rate = <1000000>;
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+ };
+
+
+ tsadcc: tsadcc@f804c000 {
+ status = "okay";
+ };
+
+ rtc@fffffeb0 {
+ status = "okay";
+ };
+
+ usart1: serial@f8020000 {
+ status = "okay";
+ };
+
+ usart2: serial@f8024000 {
+ status = "okay";
+ };
+
+ usb2: gadget@f803c000 {
+ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ mmc1: mmc@f000c000 {
+ pinctrl-0 = <
+ &pinctrl_mmc1_slot0_clk_cmd_dat0
+ &pinctrl_mmc1_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ non-removable;
+ };
+ };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <3>;
+ atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+ &pioD 19 GPIO_ACTIVE_LOW
+ &pioD 20 GPIO_ACTIVE_LOW
+ >;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index f770655..c61b16f 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -191,12 +191,12 @@
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */
};
- pinctrl_uart0_rts: uart0_rts-0 {
+ pinctrl_uart0_cts: uart0_cts-0 {
atmel,pins =
<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */
};
- pinctrl_uart0_cts: uart0_cts-0 {
+ pinctrl_uart0_rts: uart0_rts-0 {
atmel,pins =
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */
};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index d2d72c3..df6b0aa 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -29,10 +29,22 @@
ahb {
apb {
- dbgu: serial@fffff200 {
+ usb1: gadget@fffb0000 {
+ atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+
+ phy0: ethernet-phy {
+ interrupt-parent = <&pioC>;
+ interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
+ };
+ };
+
usart1: serial@fffc4000 {
pinctrl-0 =
<&pinctrl_uart1
@@ -44,16 +56,6 @@
status = "okay";
};
- macb0: ethernet@fffbc000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- usb1: gadget@fffb0000 {
- atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
spi0: spi@fffe0000 {
status = "okay";
cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
@@ -63,12 +65,45 @@
reg = <0>;
};
};
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
};
usb0: ohci@00300000 {
num-ports = <2>;
status = "okay";
};
+
+ nor_flash@10000000 {
+ compatible = "cfi-flash";
+ reg = <0x10000000 0x800000>;
+ linux,mtd-name = "physmap-flash.0";
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ barebox@0 {
+ label = "barebox";
+ reg = <0x00000 0x40000>;
+ };
+
+ bareboxenv@40000 {
+ label = "bareboxenv";
+ reg = <0x40000 0x10000>;
+ };
+
+ kernel@50000 {
+ label = "kernel";
+ reg = <0x50000 0x300000>;
+ };
+
+ root@350000 {
+ label = "root";
+ reg = <0x350000 0x4B0000>;
+ };
+ };
};
leds {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index d5bd65f..c8fa9b9 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -30,6 +30,7 @@
i2c0 = &i2c0;
ssc0 = &ssc0;
ssc1 = &ssc1;
+ pwm0 = &pwm0;
};
cpus {
#address-cells = <0>;
@@ -366,6 +367,34 @@
};
};
+ fb {
+ pinctrl_fb: fb-0 {
+ atmel,pins =
+ <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A */
+ AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A */
+ AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A */
+ AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB9 periph B */
+ AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A */
+ AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A */
+ AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A */
+ AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 periph A */
+ AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 periph A */
+ AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A */
+ AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A */
+ AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A */
+ AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A */
+ AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC12 periph B */
+ AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC18 periph A */
+ AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A */
+ AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A */
+ AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A */
+ AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC24 periph A */
+ AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC17 periph B */
+ AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC26 periph A */
+ AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -547,6 +576,23 @@
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
+
+ pwm0: pwm@fffb8000 {
+ compatible = "atmel,at91sam9rl-pwm";
+ reg = <0xfffb8000 0x300>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ };
+
+ fb0: fb@0x00700000 {
+ compatible = "atmel,at91sam9263-lcdc";
+ reg = <0x00700000 0x1000>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fb>;
+ status = "disabled";
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 70f835b..15009c9 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -95,6 +95,36 @@
};
};
+ fb0: fb@0x00700000 {
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ atmel,lcdcon-backlight;
+ atmel,dmacon = <0x1>;
+ atmel,lcdcon2 = <0x80008002>;
+ atmel,guard-time = <1>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <4965000>;
+ hactive = <240>;
+ vactive = <320>;
+ hback-porch = <1>;
+ hfront-porch = <33>;
+ vback-porch = <1>;
+ vfront-porch = <0>;
+ hsync-len = <5>;
+ vsync-len = <1>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+ };
+
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index c3e5148..ef0857c 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -37,6 +37,7 @@
i2c1 = &i2c1;
ssc0 = &ssc0;
ssc1 = &ssc1;
+ pwm0 = &pwm0;
};
cpus {
#address-cells = <0>;
@@ -143,6 +144,22 @@
};
};
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA21 periph A TWCK0 */
+ AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A TWD0 */
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A TWCK1 */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A TWD1 */
+ };
+ };
+
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
@@ -425,6 +442,42 @@
};
};
+ fb {
+ pinctrl_fb: fb-0 {
+ atmel,pins =
+ <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE0 periph A */
+ AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE2 periph A */
+ AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE3 periph A */
+ AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE4 periph A */
+ AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE5 periph A */
+ AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE6 periph A */
+ AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE7 periph A */
+ AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE8 periph A */
+ AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE9 periph A */
+ AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE10 periph A */
+ AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE11 periph A */
+ AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE12 periph A */
+ AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE13 periph A */
+ AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE14 periph A */
+ AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE15 periph A */
+ AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE16 periph A */
+ AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE17 periph A */
+ AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE18 periph A */
+ AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE19 periph A */
+ AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE20 periph A */
+ AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */
+ AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE22 periph A */
+ AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */
+ AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */
+ AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */
+ AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */
+ AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */
+ AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */
+ AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */
+ AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -542,6 +595,8 @@
compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff84000 0x100>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -551,6 +606,8 @@
compatible = "atmel,at91sam9g10-i2c";
reg = <0xfff88000 0x100>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -614,10 +671,19 @@
};
};
+ pwm0: pwm@fffb8000 {
+ compatible = "atmel,at91sam9rl-pwm";
+ reg = <0xfffb8000 0x300>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
mmc0: mmc@fff80000 {
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -629,6 +695,7 @@
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
dma-names = "rxtx";
#address-cells = <1>;
@@ -727,6 +794,15 @@
};
};
+ fb0: fb@0x00500000 {
+ compatible = "atmel,at91sam9g45-lcdc";
+ reg = <0x00500000 0x1000>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fb>;
+ status = "disabled";
+ };
+
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index a4b00e5..7ff665a 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -105,6 +105,14 @@
AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */
};
};
+
+ pwm0 {
+ pinctrl_pwm_leds: pwm-led {
+ atmel,pins =
+ <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */
+ AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */
+ };
+ };
};
spi0: spi@fffa4000{
@@ -121,6 +129,42 @@
atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
status = "okay";
};
+
+ pwm0: pwm@fffb8000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_leds>;
+ };
+ };
+
+ fb0: fb@0x00500000 {
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <32>;
+ atmel,lcdcon-backlight;
+ atmel,dmacon = <0x1>;
+ atmel,lcdcon2 = <0x80008002>;
+ atmel,guard-time = <9>;
+ atmel,lcd-wiring-mode = "RGB";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <1>;
+ hfront-porch = <1>;
+ vback-porch = <40>;
+ vfront-porch = <1>;
+ hsync-len = <45>;
+ vsync-len = <1>;
+ };
+ };
+ };
};
nand0: nand@40000000 {
@@ -165,16 +209,22 @@
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
d6 {
label = "d6";
- gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm0 3 5000 0>;
+ max-brightness = <255>;
linux,default-trigger = "nand-disk";
};
d7 {
label = "d7";
- gpios = <&pioD 31 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm0 1 5000 0>;
+ max-brightness = <255>;
linux,default-trigger = "mmc0";
};
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 6224f9f..7248270 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -33,6 +33,7 @@
i2c0 = &i2c0;
i2c1 = &i2c1;
ssc0 = &ssc0;
+ pwm0 = &pwm0;
};
cpus {
#address-cells = <0>;
@@ -542,6 +543,14 @@
reg = <0xfffffe40 0x10>;
status = "disabled";
};
+
+ pwm0: pwm@f8034000 {
+ compatible = "atmel,at91sam9rl-pwm";
+ reg = <0xf8034000 0x300>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 40267a1..6e5e9cf 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -35,6 +35,7 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
ssc0 = &ssc0;
+ pwm0 = &pwm0;
};
cpus {
#address-cells = <0>;
@@ -762,6 +763,14 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
};
+
+ pwm0: pwm@f8034000 {
+ compatible = "atmel,at91sam9rl-pwm";
+ reg = <0xf8034000 0x300>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 6e9deb7..2a3b1c1 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -23,10 +23,15 @@
&gpio {
pinctrl-names = "default";
- pinctrl-0 = <&alt0 &alt3>;
+ pinctrl-0 = <&gpioout &alt0 &alt3>;
+
+ gpioout: gpioout {
+ brcm,pins = <6>;
+ brcm,function = <1>; /* GPIO out */
+ };
alt0: alt0 {
- brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>;
+ brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
brcm,function = <4>; /* alt0 */
};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index aa537ed..b021c96 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -107,6 +107,12 @@
clocks = <&clk_mmc>;
status = "disabled";
};
+
+ usb {
+ compatible = "brcm,bcm2835-usb";
+ reg = <0x7e980000 0x10000>;
+ interrupts = <1 9>;
+ };
};
clocks {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 8349a24..7a70f4ca 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -23,7 +23,7 @@
power {
label = "Power";
gpios = <&gpio0 18 1>;
- linux,default-trigger = "default-on";
+ default-state = "keep";
};
};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 113a8bc..8de1031 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -107,51 +107,29 @@
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
- mbusc: mbus-ctrl@20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x80>, <0x800100 0x8>;
- };
-
- timer: timer@20300 {
- compatible = "marvell,orion-timer";
- reg = <0x20300 0x20>;
- interrupt-parent = <&bridge_intc>;
- interrupts = <1>, <2>;
+ spi0: spi-ctrl@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <6>;
+ reg = <0x10600 0x28>;
clocks = <&core_clk 0>;
+ pinctrl-0 = <&pmx_spi0>;
+ pinctrl-names = "default";
+ status = "disabled";
};
- intc: main-interrupt-ctrl@20200 {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20200 0x10>, <0x20210 0x10>;
- };
-
- bridge_intc: bridge-interrupt-ctrl@20110 {
- compatible = "marvell,orion-bridge-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20110 0x8>;
- interrupts = <0>;
- marvell,#interrupts = <5>;
- };
-
- core_clk: core-clocks@d0214 {
- compatible = "marvell,dove-core-clock";
- reg = <0xd0214 0x4>;
- #clock-cells = <1>;
- };
-
- gate_clk: clock-gating-ctrl@d0038 {
- compatible = "marvell,dove-gating-clock";
- reg = <0xd0038 0x4>;
+ i2c0: i2c-ctrl@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <11>;
+ clock-frequency = <400000>;
+ timeout-ms = <1000>;
clocks = <&core_clk 0>;
- #clock-cells = <1>;
- };
-
- thermal: thermal-diode@d001c {
- compatible = "marvell,dove-thermal";
- reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+ status = "disabled";
};
uart0: serial@12000 {
@@ -192,34 +170,224 @@
status = "disabled";
};
- gpio0: gpio-ctrl@d0400 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0400 0x20>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <12>, <13>, <14>, <60>;
+ spi1: spi-ctrl@14600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ interrupts = <5>;
+ reg = <0x14600 0x28>;
+ clocks = <&core_clk 0>;
+ status = "disabled";
};
- gpio1: gpio-ctrl@d0420 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xd0420 0x20>;
- ngpios = <32>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <61>;
+ mbusc: mbus-ctrl@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x80>, <0x800100 0x8>;
};
- gpio2: gpio-ctrl@e8400 {
- compatible = "marvell,orion-gpio";
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xe8400 0x0c>;
- ngpios = <8>;
+ bridge_intc: bridge-interrupt-ctrl@20110 {
+ compatible = "marvell,orion-bridge-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <0>;
+ marvell,#interrupts = <5>;
+ };
+
+ intc: main-interrupt-ctrl@20200 {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x10>, <0x20210 0x10>;
+ };
+
+ timer: timer@20300 {
+ compatible = "marvell,orion-timer";
+ reg = <0x20300 0x20>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <1>, <2>;
+ clocks = <&core_clk 0>;
+ };
+
+ crypto: crypto-engine@30000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x30000 0x10000>,
+ <0xffffe000 0x800>;
+ reg-names = "regs", "sram";
+ interrupts = <31>;
+ clocks = <&gate_clk 15>;
+ status = "okay";
+ };
+
+ ehci0: usb-host@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <24>;
+ clocks = <&gate_clk 0>;
+ status = "okay";
+ };
+
+ ehci1: usb-host@51000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x51000 0x1000>;
+ interrupts = <25>;
+ clocks = <&gate_clk 1>;
+ status = "okay";
+ };
+
+ xor0: dma-engine@60800 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60800 0x100
+ 0x60a00 0x100>;
+ clocks = <&gate_clk 23>;
+ status = "okay";
+
+ channel0 {
+ interrupts = <39>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+
+ channel1 {
+ interrupts = <40>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ };
+
+ xor1: dma-engine@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ clocks = <&gate_clk 24>;
+ status = "okay";
+
+ channel0 {
+ interrupts = <42>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+
+ channel1 {
+ interrupts = <43>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ };
+
+ sdio1: sdio-host@90000 {
+ compatible = "marvell,dove-sdhci";
+ reg = <0x90000 0x100>;
+ interrupts = <36>, <38>;
+ clocks = <&gate_clk 9>;
+ pinctrl-0 = <&pmx_sdio1>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ eth: ethernet-ctrl@72000 {
+ compatible = "marvell,orion-eth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72000 0x4000>;
+ clocks = <&gate_clk 2>;
+ marvell,tx-checksum-limit = <1600>;
+ status = "disabled";
+
+ ethernet-port@0 {
+ device_type = "network";
+ compatible = "marvell,orion-eth-port";
+ reg = <0>;
+ interrupts = <29>;
+ /* overwrite MAC address in bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <ðphy>;
+ };
+ };
+
+ mdio: mdio-bus@72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <30>;
+ clocks = <&gate_clk 2>;
+ status = "disabled";
+
+ ethphy: ethernet-phy {
+ device_type = "ethernet-phy";
+ /* set phy address in board file */
+ };
+ };
+
+ sdio0: sdio-host@92000 {
+ compatible = "marvell,dove-sdhci";
+ reg = <0x92000 0x100>;
+ interrupts = <35>, <37>;
+ clocks = <&gate_clk 8>;
+ pinctrl-0 = <&pmx_sdio0>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ sata0: sata-host@a0000 {
+ compatible = "marvell,orion-sata";
+ reg = <0xa0000 0x2400>;
+ interrupts = <62>;
+ clocks = <&gate_clk 3>;
+ phys = <&sata_phy0>;
+ phy-names = "port0";
+ nr-ports = <1>;
+ status = "disabled";
+ };
+
+ sata_phy0: sata-phy@a2000 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0xa2000 0x0334>;
+ clocks = <&gate_clk 3>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
+ audio0: audio-controller@b0000 {
+ compatible = "marvell,dove-audio";
+ reg = <0xb0000 0x2210>;
+ interrupts = <19>, <20>;
+ clocks = <&gate_clk 12>;
+ clock-names = "internal";
+ status = "disabled";
+ };
+
+ audio1: audio-controller@b4000 {
+ compatible = "marvell,dove-audio";
+ reg = <0xb4000 0x2210>;
+ interrupts = <21>, <22>;
+ clocks = <&gate_clk 13>;
+ clock-names = "internal";
+ status = "disabled";
+ };
+
+ thermal: thermal-diode@d001c {
+ compatible = "marvell,dove-thermal";
+ reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+ };
+
+ gate_clk: clock-gating-ctrl@d0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0xd0038 0x4>;
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+ };
+
+ pmu_intc: pmu-interrupt-ctrl@d0050 {
+ compatible = "marvell,dove-pmu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd0050 0x8>;
+ interrupts = <33>;
+ marvell,#interrupts = <7>;
};
pinctrl: pin-ctrl@d0200 {
@@ -413,193 +581,47 @@
};
};
- spi0: spi-ctrl@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <6>;
- reg = <0x10600 0x28>;
- clocks = <&core_clk 0>;
- pinctrl-0 = <&pmx_spi0>;
- pinctrl-names = "default";
- status = "disabled";
+ core_clk: core-clocks@d0214 {
+ compatible = "marvell,dove-core-clock";
+ reg = <0xd0214 0x4>;
+ #clock-cells = <1>;
};
- spi1: spi-ctrl@14600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- interrupts = <5>;
- reg = <0x14600 0x28>;
- clocks = <&core_clk 0>;
- status = "disabled";
+ gpio0: gpio-ctrl@d0400 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xd0400 0x20>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <12>, <13>, <14>, <60>;
};
- i2c0: i2c-ctrl@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <11>;
- clock-frequency = <400000>;
- timeout-ms = <1000>;
- clocks = <&core_clk 0>;
- status = "disabled";
- };
-
- ehci0: usb-host@50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <24>;
- clocks = <&gate_clk 0>;
- status = "okay";
- };
-
- ehci1: usb-host@51000 {
- compatible = "marvell,orion-ehci";
- reg = <0x51000 0x1000>;
- interrupts = <25>;
- clocks = <&gate_clk 1>;
- status = "okay";
- };
-
- sdio0: sdio-host@92000 {
- compatible = "marvell,dove-sdhci";
- reg = <0x92000 0x100>;
- interrupts = <35>, <37>;
- clocks = <&gate_clk 8>;
- pinctrl-0 = <&pmx_sdio0>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- sdio1: sdio-host@90000 {
- compatible = "marvell,dove-sdhci";
- reg = <0x90000 0x100>;
- interrupts = <36>, <38>;
- clocks = <&gate_clk 9>;
- pinctrl-0 = <&pmx_sdio1>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- sata0: sata-host@a0000 {
- compatible = "marvell,orion-sata";
- reg = <0xa0000 0x2400>;
- interrupts = <62>;
- clocks = <&gate_clk 3>;
- nr-ports = <1>;
- status = "disabled";
+ gpio1: gpio-ctrl@d0420 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xd0420 0x20>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <61>;
};
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
+ interrupt-parent = <&pmu_intc>;
+ interrupts = <5>;
};
- crypto: crypto-engine@30000 {
- compatible = "marvell,orion-crypto";
- reg = <0x30000 0x10000>,
- <0xffffe000 0x800>;
- reg-names = "regs", "sram";
- interrupts = <31>;
- clocks = <&gate_clk 15>;
- status = "okay";
- };
-
- xor0: dma-engine@60800 {
- compatible = "marvell,orion-xor";
- reg = <0x60800 0x100
- 0x60a00 0x100>;
- clocks = <&gate_clk 23>;
- status = "okay";
-
- channel0 {
- interrupts = <39>;
- dmacap,memcpy;
- dmacap,xor;
- };
-
- channel1 {
- interrupts = <40>;
- dmacap,memcpy;
- dmacap,xor;
- };
- };
-
- xor1: dma-engine@60900 {
- compatible = "marvell,orion-xor";
- reg = <0x60900 0x100
- 0x60b00 0x100>;
- clocks = <&gate_clk 24>;
- status = "okay";
-
- channel0 {
- interrupts = <42>;
- dmacap,memcpy;
- dmacap,xor;
- };
-
- channel1 {
- interrupts = <43>;
- dmacap,memcpy;
- dmacap,xor;
- };
- };
-
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <30>;
- clocks = <&gate_clk 2>;
- status = "disabled";
-
- ethphy: ethernet-phy {
- device-type = "ethernet-phy";
- /* set phy address in board file */
- };
- };
-
- eth: ethernet-ctrl@72000 {
- compatible = "marvell,orion-eth";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72000 0x4000>;
- clocks = <&gate_clk 2>;
- marvell,tx-checksum-limit = <1600>;
- status = "disabled";
-
- ethernet-port@0 {
- device_type = "network";
- compatible = "marvell,orion-eth-port";
- reg = <0>;
- interrupts = <29>;
- /* overwrite MAC address in bootloader */
- local-mac-address = [00 00 00 00 00 00];
- phy-handle = <ðphy>;
- };
- };
-
- audio0: audio-controller@b0000 {
- compatible = "marvell,dove-audio";
- reg = <0xb0000 0x2210>;
- interrupts = <19>, <20>;
- clocks = <&gate_clk 12>;
- clock-names = "internal";
- status = "disabled";
- };
-
- audio1: audio-controller@b4000 {
- compatible = "marvell,dove-audio";
- reg = <0xb4000 0x2210>;
- interrupts = <21>, <22>;
- clocks = <&gate_clk 13>;
- clock-names = "internal";
- status = "disabled";
+ gpio2: gpio-ctrl@e8400 {
+ compatible = "marvell,orion-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe8400 0x0c>;
+ ngpios = <8>;
};
};
};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 861aa7d..50ccd15 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -9,7 +9,10 @@
*/
/dts-v1/;
-/include/ "emev2.dtsi"
+#include "emev2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "EMEV2 KZM9D Board";
@@ -47,11 +50,46 @@
reg = <0x20000000 0x10000>;
phy-mode = "mii";
interrupt-parent = <&gpio0>;
- interrupts = <1 1>; /* active high */
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vddvario-supply = <®_1p8v>;
vdd33a-supply = <®_3p3v>;
};
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ label = "DSW2-1";
+ linux,code = <KEY_1>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ button@2 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ label = "DSW2-2";
+ linux,code = <KEY_2>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ button@3 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ label = "DSW2-3";
+ linux,code = <KEY_3>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+ button@4 {
+ debounce_interval = <50>;
+ wakeup = <1>;
+ label = "DSW2-4";
+ linux,code = <KEY_4>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index 9063a443..e37985f 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -8,7 +8,8 @@
* kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "renesas,emev2";
@@ -48,44 +49,129 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 120 4>,
- <0 121 4>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ smu@e0110000 {
+ compatible = "renesas,emev2-smu";
+ reg = <0xe0110000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ c32ki: c32ki {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+ pll3_fo: pll3_fo {
+ compatible = "fixed-factor-clock";
+ clocks = <&c32ki>;
+ clock-div = <1>;
+ clock-mult = <7000>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclkdiv: usia_u0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x610 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ usib_u1_sclkdiv: usib_u1_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x65c 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ usib_u2_sclkdiv: usib_u2_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x65c 16>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ usib_u3_sclkdiv: usib_u3_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x660 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclk: usia_u0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4a0 1>;
+ clocks = <&usia_u0_sclkdiv>;
+ #clock-cells = <0>;
+ };
+ usib_u1_sclk: usib_u1_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4b8 1>;
+ clocks = <&usib_u1_sclkdiv>;
+ #clock-cells = <0>;
+ };
+ usib_u2_sclk: usib_u2_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4bc 1>;
+ clocks = <&usib_u2_sclkdiv>;
+ #clock-cells = <0>;
+ };
+ usib_u3_sclk: usib_u3_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4c0 1>;
+ clocks = <&usib_u3_sclkdiv>;
+ #clock-cells = <0>;
+ };
+ sti_sclk: sti_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x528 1>;
+ clocks = <&c32ki>;
+ #clock-cells = <0>;
+ };
};
sti@e0180000 {
compatible = "renesas,em-sti";
reg = <0xe0180000 0x54>;
- interrupts = <0 125 0>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sti_sclk>;
+ clock-names = "sclk";
};
uart@e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
- interrupts = <0 8 0>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
};
uart@e1030000 {
compatible = "renesas,em-uart";
reg = <0xe1030000 0x38>;
- interrupts = <0 9 0>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usib_u1_sclk>;
+ clock-names = "sclk";
};
uart@e1040000 {
compatible = "renesas,em-uart";
reg = <0xe1040000 0x38>;
- interrupts = <0 10 0>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usib_u2_sclk>;
+ clock-names = "sclk";
};
uart@e1050000 {
compatible = "renesas,em-uart";
reg = <0xe1050000 0x38>;
- interrupts = <0 11 0>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usib_u3_sclk>;
+ clock-names = "sclk";
};
gpio0: gpio@e0050000 {
compatible = "renesas,em-gio";
reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
- interrupts = <0 67 0>, <0 68 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
+ <0 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@@ -95,7 +181,8 @@
gpio1: gpio@e0050080 {
compatible = "renesas,em-gio";
reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
- interrupts = <0 69 0>, <0 70 0>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 70 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@@ -105,7 +192,8 @@
gpio2: gpio@e0050100 {
compatible = "renesas,em-gio";
reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
- interrupts = <0 71 0>, <0 72 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+ <0 72 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@@ -115,7 +203,8 @@
gpio3: gpio@e0050180 {
compatible = "renesas,em-gio";
reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
- interrupts = <0 73 0>, <0 74 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
+ <0 74 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@@ -125,7 +214,8 @@
gpio4: gpio@e0050200 {
compatible = "renesas,em-gio";
reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
- interrupts = <0 75 0>, <0 76 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
+ <0 76 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <31>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index a73eeb5..08452e1 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -85,21 +85,21 @@
reg = <0x10023CE0 0x20>;
};
- gic:interrupt-controller@10490000 {
+ gic: interrupt-controller@10490000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
- combiner:interrupt-controller@10440000 {
+ combiner: interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x10440000 0x1000>;
};
- sys_reg: sysreg {
+ sys_reg: syscon@10010000 {
compatible = "samsung,exynos4-sysreg", "syscon";
reg = <0x10010000 0x400>;
};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 1a12fb2..2aa13cb 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -313,7 +313,7 @@
display-timings {
native-mode = <&timing0>;
timing0: timing {
- clock-frequency = <50000>;
+ clock-frequency = <47500000>;
hactive = <1024>;
vactive = <600>;
hfront-porch = <64>;
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 057d682..48ecd7a 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -36,11 +36,11 @@
reg = <0x10023CA0 0x20>;
};
- gic:interrupt-controller@10490000 {
+ gic: interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
- combiner:interrupt-controller@10440000 {
+ combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <16>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
@@ -51,24 +51,21 @@
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupt-controller;
- #interrups-cells = <2>;
interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
clocks = <&clock 3>, <&clock 344>;
clock-names = "fin_pll", "mct";
mct_map: mct-map {
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0x0 0 &gic 0 57 0>,
- <0x1 0 &gic 0 69 0>,
- <0x2 0 &combiner 12 6>,
- <0x3 0 &combiner 12 7>,
- <0x4 0 &gic 0 42 0>,
- <0x5 0 &gic 0 48 0>;
+ interrupt-map = <0 &gic 0 57 0>,
+ <1 &gic 0 69 0>,
+ <2 &combiner 12 6>,
+ <3 &combiner 12 7>,
+ <4 &gic 0 42 0>,
+ <5 &gic 0 48 0>;
};
};
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 6f34d7f..94a43f9 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -22,7 +22,7 @@
/ {
compatible = "samsung,exynos4212";
- gic:interrupt-controller@10490000 {
+ gic: interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
@@ -34,26 +34,4 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
<0 107 0>, <0 108 0>;
};
-
- mct@10050000 {
- compatible = "samsung,exynos4412-mct";
- reg = <0x10050000 0x800>;
- interrupt-controller;
- #interrups-cells = <2>;
- interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>;
-
- mct_map: mct-map {
- #interrupt-cells = <2>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0x0 0 &gic 0 57 0>,
- <0x1 0 &combiner 12 5>,
- <0x2 0 &combiner 12 6>,
- <0x3 0 &combiner 12 7>,
- <0x4 0 &gic 1 12 0>,
- <0x5 0 &gic 1 12 0>;
- };
- };
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 46c678e..8aad5f7 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -38,9 +38,7 @@
};
};
- mshc@12550000 {
- #address-cells = <1>;
- #size-cells = <0>;
+ mmc@12550000 {
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
vmmc-supply = <&ldo20_reg &buck8_reg>;
@@ -49,7 +47,6 @@
num-slots = <1>;
supports-highspeed;
broken-cd;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index d65984c..6bc0539 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -122,9 +122,7 @@
status = "okay";
};
- mshc@12550000 {
- #address-cells = <1>;
- #size-cells = <0>;
+ mmc@12550000 {
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
status = "okay";
@@ -132,7 +130,6 @@
num-slots = <1>;
supports-highspeed;
broken-cd;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -159,7 +156,7 @@
display-timings {
native-mode = <&timing0>;
timing0: timing {
- clock-frequency = <50000>;
+ clock-frequency = <47500000>;
hactive = <1024>;
vactive = <600>;
hfront-porch = <64>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
new file mode 100644
index 0000000..0a98312
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -0,0 +1,93 @@
+/*
+ * FriendlyARM's Exynos4412 based TINY4412 board device tree source
+ *
+ * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
+ *
+ * Device tree source file for FriendlyARM's TINY4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+ model = "FriendlyARM TINY4412 board based on Exynos4412";
+ compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpm4 0 1>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpm4 1 1>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "led3";
+ gpios = <&gpm4 2 1>;
+ default-state = "off";
+ };
+
+ led4 {
+ label = "led4";
+ gpios = <&gpm4 3 1>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index fb7b9ae..890ad27 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -442,13 +442,25 @@
};
};
- sdhci@12510000 {
- bus-width = <8>;
+ mmc@12550000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
non-removable;
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
- pinctrl-names = "default";
+ card-detect-delay = <200>;
vmmc-supply = <&vemmc_reg>;
+ clock-frequency = <400000000>;
+ samsung,dw-mshc-ciu-div = <0>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
status = "okay";
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
};
serial@13800000 {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e743e67..87b339c 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -22,7 +22,7 @@
/ {
compatible = "samsung,exynos4412";
- gic:interrupt-controller@10490000 {
+ gic: interrupt-controller@10490000 {
cpu-offset = <0x4000>;
};
@@ -35,37 +35,4 @@
<0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
};
- mct@10050000 {
- compatible = "samsung,exynos4412-mct";
- reg = <0x10050000 0x800>;
- interrupt-controller;
- #interrups-cells = <2>;
- interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>, <6 0>, <7 0>;
- clocks = <&clock 3>, <&clock 344>;
- clock-names = "fin_pll", "mct";
-
- mct_map: mct-map {
- #interrupt-cells = <2>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0x0 0 &gic 0 57 0>,
- <0x1 0 &combiner 12 5>,
- <0x2 0 &combiner 12 6>,
- <0x3 0 &combiner 12 7>,
- <0x4 0 &gic 1 12 0>,
- <0x5 0 &gic 1 12 0>,
- <0x6 0 &gic 1 12 0>,
- <0x7 0 &gic 1 12 0>;
- };
- };
-
- mshc@12550000 {
- compatible = "samsung,exynos4412-dw-mshc";
- reg = <0x12550000 0x1000>;
- interrupts = <0 77 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index ad531fe..5c412aa 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -28,6 +28,7 @@
pinctrl3 = &pinctrl_3;
fimc-lite0 = &fimc_lite_0;
fimc-lite1 = &fimc_lite_1;
+ mshc0 = &mshc_0;
};
pd_isp: isp-power-domain@10023CA0 {
@@ -41,6 +42,26 @@
#clock-cells = <1>;
};
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0>, <1>, <2>, <3>, <4>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &gic 0 57 0>,
+ <1 &combiner 12 5>,
+ <2 &combiner 12 6>,
+ <3 &combiner 12 7>,
+ <4 &gic 1 12 0>;
+ };
+ };
+
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
@@ -176,4 +197,16 @@
};
};
};
+
+ mshc_0: mmc@12550000 {
+ compatible = "samsung,exynos4412-dw-mshc";
+ reg = <0x12550000 0x1000>;
+ interrupts = <0 77 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-depth = <0x80>;
+ clocks = <&clock 301>, <&clock 149>;
+ clock-names = "biu", "ciu";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 074739d..258dca4 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -23,7 +23,7 @@
reg = <0x10000000 0x100>;
};
- combiner:interrupt-controller@10440000 {
+ combiner: interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
#interrupt-cells = <2>;
interrupt-controller;
@@ -39,7 +39,7 @@
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
- gic:interrupt-controller@10481000 {
+ gic: interrupt-controller@10481000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -50,27 +50,6 @@
interrupts = <1 9 0xf04>;
};
- dwmmc_0: dwmmc0@12200000 {
- compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- dwmmc_1: dwmmc1@12210000 {
- compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- dwmmc_2: dwmmc2@12220000 {
- compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6845270..b42e658 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -34,6 +34,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
samsung,i2c-slave-addr = <0x66>;
+ status = "okay";
s5m8767_pmic@66 {
compatible = "samsung,s5m8767-pmic";
@@ -266,7 +267,7 @@
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
- regulator-min-microvolt = <925000>;
+ regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
@@ -302,11 +303,13 @@
buck7_reg: BUCK7 {
regulator-name = "PVDD_BUCK7";
regulator-always-on;
+ op_mode = <1>;
};
buck8_reg: BUCK8 {
regulator-name = "PVDD_BUCK8";
regulator-always-on;
+ op_mode = <1>;
};
buck9_reg: BUCK9 {
@@ -319,11 +322,9 @@
};
};
- i2c@12C70000 {
- status = "disabled";
- };
-
i2c@12C80000 {
+ status = "okay";
+
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
samsung,i2c-slave-addr = <0x50>;
@@ -335,7 +336,10 @@
};
i2c@12C90000 {
+ status = "okay";
+
wm1811a@1a {
+
compatible = "wlf,wm1811";
reg = <0x1a>;
@@ -353,23 +357,9 @@
};
};
- i2c@12CA0000 {
- status = "disabled";
- };
-
- i2c@12CB0000 {
- status = "disabled";
- };
-
- i2c@12CC0000 {
- status = "disabled";
- };
-
- i2c@12CD0000 {
- status = "disabled";
- };
-
i2c@12CE0000 {
+ status = "okay";
+
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
samsung,i2c-slave-addr = <0x38>;
@@ -380,15 +370,11 @@
};
};
- i2c@121D0000 {
- status = "disabled";
- };
-
- dwmmc_0: dwmmc0@12200000 {
+ mmc_0: mmc@12200000 {
+ status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -403,14 +389,10 @@
};
};
- dwmmc_1: dwmmc1@12210000 {
- status = "disabled";
- };
-
- dwmmc_2: dwmmc2@12220000 {
+ mmc_2: mmc@12220000 {
+ status = "okay";
num-slots = <1>;
supports-highspeed;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -426,26 +408,10 @@
};
};
- dwmmc_3: dwmmc3@12230000 {
- status = "disabled";
- };
-
i2s0: i2s@03830000 {
status = "okay";
};
- spi_0: spi@12d20000 {
- status = "disabled";
- };
-
- spi_1: spi@12d30000 {
- status = "disabled";
- };
-
- spi_2: spi@12d40000 {
- status = "disabled";
- };
-
gpio_keys {
compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
similarity index 95%
rename from arch/arm/boot/dts/cros5250-common.dtsi
rename to arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 9b186ac..9a61494 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -37,6 +37,7 @@
};
i2c@12C60000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
@@ -185,6 +186,7 @@
};
i2c@12C70000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
@@ -198,6 +200,7 @@
};
i2c@12C80000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
@@ -208,30 +211,31 @@
};
i2c@12C90000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
i2c@12CA0000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
i2c@12CB0000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
- i2c@12CC0000 {
- status = "disabled";
- };
-
i2c@12CD0000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
i2c@12CE0000 {
+ status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
@@ -241,11 +245,10 @@
};
};
- dwmmc0@12200000 {
+ mmc@12200000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -259,14 +262,9 @@
};
};
- dwmmc1@12210000 {
- status = "disabled";
- };
-
- dwmmc2@12220000 {
+ mmc@12220000 {
num-slots = <1>;
supports-highspeed;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -281,11 +279,10 @@
};
};
- dwmmc3@12230000 {
+ mmc@12230000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -298,19 +295,12 @@
};
};
- spi_0: spi@12d20000 {
- status = "disabled";
- };
-
spi_1: spi@12d30000 {
+ status = "okay";
samsung,spi-src-clk = <0>;
num-cs = <1>;
};
- spi_2: spi@12d40000 {
- status = "disabled";
- };
-
hdmi {
hpd-gpio = <&gpx3 7 0>;
};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index f86d567..3e69837 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -30,6 +30,7 @@
i2c@12C60000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
+ status = "okay";
eeprom@50 {
compatible = "samsung,s524ad0xd1";
@@ -37,7 +38,7 @@
};
};
- vdd:fixed-regulator@0 {
+ vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
regulator-min-microvolt = <1800000>;
@@ -45,7 +46,7 @@
regulator-always-on;
};
- dbvdd:fixed-regulator@1 {
+ dbvdd: fixed-regulator@1 {
compatible = "regulator-fixed";
regulator-name = "dbvdd-supply";
regulator-min-microvolt = <3300000>;
@@ -53,7 +54,7 @@
regulator-always-on;
};
- spkvdd:fixed-regulator@2 {
+ spkvdd: fixed-regulator@2 {
compatible = "regulator-fixed";
regulator-name = "spkvdd-supply";
regulator-min-microvolt = <5000000>;
@@ -64,6 +65,7 @@
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
+ status = "okay";
eeprom@51 {
compatible = "samsung,s524ad0xd1";
@@ -77,6 +79,9 @@
gpio-controller;
#gpio-cells = <2>;
+ clocks = <&codec_mclk>;
+ clock-names = "MCLK1";
+
AVDD2-supply = <&vdd>;
CPVDD-supply = <&vdd>;
DBVDD-supply = <&dbvdd>;
@@ -89,6 +94,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
samsung,i2c-slave-addr = <0x38>;
+ status = "okay";
sata-phy {
compatible = "samsung,sata-phy";
@@ -103,6 +109,7 @@
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+ status = "okay";
hdmiddc@50 {
compatible = "samsung,exynos4210-hdmiddc";
@@ -110,29 +117,10 @@
};
};
- i2c@12C90000 {
- status = "disabled";
- };
-
- i2c@12CA0000 {
- status = "disabled";
- };
-
- i2c@12CB0000 {
- status = "disabled";
- };
-
- i2c@12CC0000 {
- status = "disabled";
- };
-
- i2c@12CD0000 {
- status = "disabled";
- };
-
i2c@12CE0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+ status = "okay";
hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
@@ -140,11 +128,11 @@
};
};
- dwmmc0@12200000 {
+ mmc@12200000 {
+ status = "okay";
num-slots = <1>;
supports-highspeed;
broken-cd;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -158,14 +146,10 @@
};
};
- dwmmc1@12210000 {
- status = "disabled";
- };
-
- dwmmc2@12220000 {
+ mmc@12220000 {
+ status = "okay";
num-slots = <1>;
supports-highspeed;
- fifo-depth = <0x80>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
@@ -180,15 +164,13 @@
};
};
- dwmmc3@12230000 {
- status = "disabled";
- };
-
spi_0: spi@12d20000 {
status = "disabled";
};
spi_1: spi@12d30000 {
+ status = "okay";
+
w25q80bw@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -214,10 +196,6 @@
};
};
- spi_2: spi@12d40000 {
- status = "disabled";
- };
-
hdmi {
hpd-gpio = <&gpx3 7 0>;
};
@@ -279,5 +257,11 @@
compatible = "samsung,clock-xxti";
clock-frequency = <24000000>;
};
+
+ codec_mclk: codec-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16934000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index fd711e2..7e45eea 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -10,7 +10,7 @@
/dts-v1/;
#include "exynos5250.dtsi"
-#include "cros5250-common.dtsi"
+#include "exynos5250-cros-common.dtsi"
/ {
model = "Google Snow";
@@ -85,7 +85,7 @@
keypad,num-rows = <8>;
keypad,num-columns = <13>;
google,needs-ghost-filter;
- linux,keymap = <0x0001003a /* CAPSLK */
+ linux,keymap = <0x0001007d /* L_META */
0x0002003b /* F1 */
0x00030030 /* B */
0x00040044 /* F10 */
@@ -130,6 +130,7 @@
0x04060024 /* J */
0x04080027 /* ; */
0x04090026 /* L */
+ 0x040a002b /* \ */
0x040b001c /* ENTER */
0x0501002c /* Z */
@@ -171,11 +172,20 @@
};
};
+ mmc@12200000 {
+ status = "okay";
+ };
+
+ mmc@12220000 {
+ status = "okay";
+ };
+
/*
* On Snow we've got SIP WiFi and so can keep drive strengths low to
* reduce EMI.
*/
- dwmmc3@12230000 {
+ mmc@12230000 {
+ status = "okay";
slot@0 {
pinctrl-names = "default";
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 9db5047..c341e55 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -33,10 +33,10 @@
gsc1 = &gsc_1;
gsc2 = &gsc_2;
gsc3 = &gsc_3;
- mshc0 = &dwmmc_0;
- mshc1 = &dwmmc_1;
- mshc2 = &dwmmc_2;
- mshc3 = &dwmmc_3;
+ mshc0 = &mmc_0;
+ mshc1 = &mmc_1;
+ mshc2 = &mmc_2;
+ mshc3 = &mmc_3;
i2c0 = &i2c_0;
i2c1 = &i2c_1;
i2c2 = &i2c_2;
@@ -60,11 +60,13 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
+ clock-frequency = <1700000000>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
+ clock-frequency = <1700000000>;
};
};
@@ -242,6 +244,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
+ status = "disabled";
};
i2c_1: i2c@12C70000 {
@@ -254,6 +257,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
+ status = "disabled";
};
i2c_2: i2c@12C80000 {
@@ -266,6 +270,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
+ status = "disabled";
};
i2c_3: i2c@12C90000 {
@@ -278,6 +283,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
+ status = "disabled";
};
i2c_4: i2c@12CA0000 {
@@ -290,6 +296,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_bus>;
+ status = "disabled";
};
i2c_5: i2c@12CB0000 {
@@ -302,6 +309,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_bus>;
+ status = "disabled";
};
i2c_6: i2c@12CC0000 {
@@ -314,6 +322,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_bus>;
+ status = "disabled";
};
i2c_7: i2c@12CD0000 {
@@ -326,6 +335,7 @@
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_bus>;
+ status = "disabled";
};
i2c_8: i2c@12CE0000 {
@@ -336,6 +346,7 @@
#size-cells = <0>;
clocks = <&clock 302>;
clock-names = "i2c";
+ status = "disabled";
};
i2c@121D0000 {
@@ -345,10 +356,12 @@
#size-cells = <0>;
clocks = <&clock 288>;
clock-names = "i2c";
+ status = "disabled";
};
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
+ status = "disabled";
reg = <0x12d20000 0x100>;
interrupts = <0 66 0>;
dmas = <&pdma0 5
@@ -364,6 +377,7 @@
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
+ status = "disabled";
reg = <0x12d30000 0x100>;
interrupts = <0 67 0>;
dmas = <&pdma1 5
@@ -379,6 +393,7 @@
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
+ status = "disabled";
reg = <0x12d40000 0x100>;
interrupts = <0 68 0>;
dmas = <&pdma0 7
@@ -392,25 +407,43 @@
pinctrl-0 = <&spi2_bus>;
};
- dwmmc_0: dwmmc0@12200000 {
+ mmc_0: mmc@12200000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x12200000 0x1000>;
clocks = <&clock 280>, <&clock 139>;
clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
};
- dwmmc_1: dwmmc1@12210000 {
+ mmc_1: mmc@12210000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 76 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x12210000 0x1000>;
clocks = <&clock 281>, <&clock 140>;
clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
};
- dwmmc_2: dwmmc2@12220000 {
+ mmc_2: mmc@12220000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 77 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x12220000 0x1000>;
clocks = <&clock 282>, <&clock 141>;
clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
};
- dwmmc_3: dwmmc3@12230000 {
+ mmc_3: mmc@12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
interrupts = <0 78 0>;
@@ -418,6 +451,8 @@
#size-cells = <0>;
clocks = <&clock 283>, <&clock 142>;
clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
};
i2s0: i2s@03830000 {
@@ -526,6 +561,15 @@
};
};
+ pwm: pwm@12dd0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x12dd0000 0x100>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+ #pwm-cells = <3>;
+ clocks = <&clock 311>;
+ clock-names = "timers";
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
new file mode 100644
index 0000000..7340745
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -0,0 +1,66 @@
+/*
+ * Samsung's Exynos5420 based Arndale Octa board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+
+/ {
+ model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
+ compatible = "insignal,arndale-octa", "samsung,exynos5420";
+
+ memory {
+ reg = <0x20000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC3,115200";
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ mmc@12200000 {
+ status = "okay";
+ broken-cd;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ mmc@12220000 {
+ status = "okay";
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index e695aba..e62c8eb 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -64,7 +64,7 @@
samsung,pins = "gpx0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
};
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 79524c7..fb5a1e2 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -31,6 +31,39 @@
};
};
+ mmc@12200000 {
+ status = "okay";
+ broken-cd;
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ mmc@12220000 {
+ status = "okay";
+ supports-highspeed;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
dp-controller@145B0000 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 09aa06c..11dd202 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -22,6 +22,9 @@
compatible = "samsung,exynos5420";
aliases {
+ mshc0 = &mmc_0;
+ mshc1 = &mmc_1;
+ mshc2 = &mmc_2;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
@@ -31,6 +34,18 @@
i2c1 = &i2c_1;
i2c2 = &i2c_2;
i2c3 = &i2c_3;
+ i2c4 = &hsi2c_4;
+ i2c5 = &hsi2c_5;
+ i2c6 = &hsi2c_6;
+ i2c7 = &hsi2c_7;
+ i2c8 = &hsi2c_8;
+ i2c9 = &hsi2c_9;
+ i2c10 = &hsi2c_10;
+ gsc0 = &gsc_0;
+ gsc1 = &gsc_1;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
};
cpus {
@@ -64,6 +79,34 @@
reg = <0x3>;
clock-frequency = <1800000000>;
};
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x102>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x103>;
+ clock-frequency = <1000000000>;
+ };
};
clock: clock-controller@10010000 {
@@ -88,13 +131,50 @@
clock-names = "mfc";
};
+ mmc_0: mmc@12200000 {
+ compatible = "samsung,exynos5420-dw-mshc-smu";
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12200000 0x2000>;
+ clocks = <&clock 351>, <&clock 132>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mmc_1: mmc@12210000 {
+ compatible = "samsung,exynos5420-dw-mshc-smu";
+ interrupts = <0 76 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12210000 0x2000>;
+ clocks = <&clock 352>, <&clock 133>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mmc_2: mmc@12220000 {
+ compatible = "samsung,exynos5420-dw-mshc";
+ interrupts = <0 77 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12220000 0x1000>;
+ clocks = <&clock 353>, <&clock 134>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
interrupt-controller;
#interrups-cells = <1>;
interrupt-parent = <&mct_map>;
- interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+ <8>, <9>, <10>, <11>;
clocks = <&clock 1>, <&clock 315>;
clock-names = "fin_pll", "mct";
@@ -109,7 +189,11 @@
<4 &gic 0 120 0>,
<5 &gic 0 121 0>,
<6 &gic 0 122 0>,
- <7 &gic 0 123 0>;
+ <7 &gic 0 123 0>,
+ <8 &gic 0 128 0>,
+ <9 &gic 0 129 0>,
+ <10 &gic 0 130 0>,
+ <11 &gic 0 131 0>;
};
};
@@ -190,6 +274,106 @@
status = "okay";
};
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@121A0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <0 34 0>;
+ clocks = <&clock 362>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@121B0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <0 35 0>;
+ clocks = <&clock 363>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ mdma0: mdma@10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <0 33 0>;
+ clocks = <&clock 473>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ };
+
+ mdma1: mdma@11C10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <0 124 0>;
+ clocks = <&clock 442>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ };
+ };
+
+ spi_0: spi@12d20000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d20000 0x100>;
+ interrupts = <0 66 0>;
+ dmas = <&pdma0 5
+ &pdma0 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ clocks = <&clock 271>, <&clock 135>;
+ clock-names = "spi", "spi_busclk0";
+ status = "disabled";
+ };
+
+ spi_1: spi@12d30000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d30000 0x100>;
+ interrupts = <0 67 0>;
+ dmas = <&pdma1 5
+ &pdma1 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ clocks = <&clock 272>, <&clock 136>;
+ clock-names = "spi", "spi_busclk0";
+ status = "disabled";
+ };
+
+ spi_2: spi@12d40000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d40000 0x100>;
+ interrupts = <0 68 0>;
+ dmas = <&pdma0 7
+ &pdma0 6>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
+ clocks = <&clock 273>, <&clock 137>;
+ clock-names = "spi", "spi_busclk0";
+ status = "disabled";
+ };
+
serial@12C00000 {
clocks = <&clock 257>, <&clock 128>;
clock-names = "uart", "clk_uart_baud0";
@@ -210,6 +394,15 @@
clock-names = "uart", "clk_uart_baud0";
};
+ pwm: pwm@12dd0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x12dd0000 0x100>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+ #pwm-cells = <3>;
+ clocks = <&clock 279>;
+ clock-names = "timers";
+ };
+
dp_phy: video-phy@10040728 {
compatible = "samsung,exynos5250-dp-video-phy";
reg = <0x10040728 4>;
@@ -292,6 +485,97 @@
status = "disabled";
};
+ hsi2c_4: i2c@12CA0000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12CA0000 0x1000>;
+ interrupts = <0 60 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_hs_bus>;
+ clocks = <&clock 265>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_5: i2c@12CB0000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12CB0000 0x1000>;
+ interrupts = <0 61 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_hs_bus>;
+ clocks = <&clock 266>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_6: i2c@12CC0000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12CC0000 0x1000>;
+ interrupts = <0 62 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_hs_bus>;
+ clocks = <&clock 267>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_7: i2c@12CD0000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12CD0000 0x1000>;
+ interrupts = <0 63 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_hs_bus>;
+ clocks = <&clock 268>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_8: i2c@12E00000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12E00000 0x1000>;
+ interrupts = <0 87 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_hs_bus>;
+ clocks = <&clock 281>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_9: i2c@12E10000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12E10000 0x1000>;
+ interrupts = <0 88 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c9_hs_bus>;
+ clocks = <&clock 282>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
+ hsi2c_10: i2c@12E20000 {
+ compatible = "samsung,exynos5-hsi2c";
+ reg = <0x12E20000 0x1000>;
+ interrupts = <0 203 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c10_hs_bus>;
+ clocks = <&clock 283>;
+ clock-names = "hsi2c";
+ status = "disabled";
+ };
+
hdmi@14530000 {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
@@ -310,4 +594,62 @@
clocks = <&clock 431>, <&clock 143>;
clock-names = "mixer", "sclk_hdmi";
};
+
+ gsc_0: video-scaler@13e00000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <0 85 0>;
+ clocks = <&clock 465>;
+ clock-names = "gscl";
+ samsung,power-domain = <&gsc_pd>;
+ };
+
+ gsc_1: video-scaler@13e10000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e10000 0x1000>;
+ interrupts = <0 86 0>;
+ clocks = <&clock 466>;
+ clock-names = "gscl";
+ samsung,power-domain = <&gsc_pd>;
+ };
+
+ tmu_cpu0: tmu@10060000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10060000 0x100>;
+ interrupts = <0 65 0>;
+ clocks = <&clock 318>;
+ clock-names = "tmu_apbif";
+ };
+
+ tmu_cpu1: tmu@10064000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10064000 0x100>;
+ interrupts = <0 183 0>;
+ clocks = <&clock 318>;
+ clock-names = "tmu_apbif";
+ };
+
+ tmu_cpu2: tmu@10068000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+ interrupts = <0 184 0>;
+ clocks = <&clock 318>, <&clock 318>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ };
+
+ tmu_cpu3: tmu@1006c000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+ interrupts = <0 185 0>;
+ clocks = <&clock 318>, <&clock 319>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ };
+
+ tmu_gpu: tmu@100a0000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+ interrupts = <0 215 0>;
+ clocks = <&clock 319>, <&clock 318>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ };
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 8da1070..02a0a12 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -29,7 +29,7 @@
#clock-cells = <1>;
};
- gic:interrupt-controller@2E0000 {
+ gic: interrupt-controller@2E0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 0f06f86..88e3d477 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -10,6 +10,11 @@
reg = <0x10000000 0x200>;
};
+ ebi@12000000 {
+ compatible = "arm,external-bus-interface";
+ reg = <0x12000000 0x100>;
+ };
+
timer@13000000 {
reg = <0x13000000 0x100>;
interrupt-parent = <&pic>;
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts
new file mode 100644
index 0000000..eaefdfe
--- /dev/null
+++ b/arch/arm/boot/dts/k2hk-evm.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+
+/ {
+ compatible = "ti,keystone-evm";
+
+ soc {
+ clock {
+ refclksys: refclksys {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <122880000>;
+ clock-output-names = "refclk-sys";
+ };
+
+ refclkpass: refclkpass {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <122880000>;
+ clock-output-names = "refclk-pass";
+ };
+
+ refclkarm: refclkarm {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "refclk-arm";
+ };
+
+ refclkddr3a: refclkddr3a {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-ddr3a";
+ };
+
+ refclkddr3b: refclkddr3b {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk-ddr3b";
+ };
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index d6713b1..2363593 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -13,17 +13,10 @@
#size-cells = <1>;
ranges;
- refclkmain: refclkmain {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <122880000>;
- clock-output-names = "refclk-main";
- };
-
mainpllclk: mainpllclk@2310110 {
#clock-cells = <0>;
compatible = "ti,keystone,main-pll-clock";
- clocks = <&refclkmain>;
+ clocks = <&refclksys>;
reg = <0x02620350 4>, <0x02310110 4>;
reg-names = "control", "multiplier";
fixed-postdiv = <2>;
@@ -32,47 +25,43 @@
papllclk: papllclk@2620358 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
- clocks = <&refclkmain>;
+ clocks = <&refclkpass>;
clock-output-names = "pa-pll-clk";
reg = <0x02620358 4>;
reg-names = "control";
- fixed-postdiv = <6>;
};
- ddr3allclk: ddr3apllclk@2620360 {
+ ddr3apllclk: ddr3apllclk@2620360 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
- clocks = <&refclkmain>;
+ clocks = <&refclkddr3a>;
clock-output-names = "ddr-3a-pll-clk";
reg = <0x02620360 4>;
reg-names = "control";
- fixed-postdiv = <6>;
};
- ddr3bllclk: ddr3bpllclk@2620368 {
+ ddr3bpllclk: ddr3bpllclk@2620368 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
- clocks = <&refclkmain>;
+ clocks = <&refclkddr3b>;
clock-output-names = "ddr-3b-pll-clk";
reg = <0x02620368 4>;
reg-names = "control";
- fixed-postdiv = <6>;
};
armpllclk: armpllclk@2620370 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
- clocks = <&refclkmain>;
+ clocks = <&refclkarm>;
clock-output-names = "arm-pll-clk";
reg = <0x02620370 4>;
reg-names = "control";
- fixed-postdiv = <6>;
};
mainmuxclk: mainmuxclk@2310108 {
#clock-cells = <0>;
compatible = "ti,keystone,pll-mux-clock";
- clocks = <&mainpllclk>, <&refclkmain>;
+ clocks = <&mainpllclk>, <&refclksys>;
reg = <0x02310108 4>;
bit-shift = <23>;
bit-mask = <1>;
@@ -135,6 +124,15 @@
clock-output-names = "chipclk13";
};
+ paclk13: paclk13 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&papllclk>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "paclk13";
+ };
+
chipclk14: chipclk14 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dtsi
similarity index 82%
rename from arch/arm/boot/dts/keystone.dts
rename to arch/arm/boot/dts/keystone.dtsi
index 100bdf5..b420290 100644
--- a/arch/arm/boot/dts/keystone.dts
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -6,14 +6,12 @@
* published by the Free Software Foundation.
*/
-/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
/ {
model = "Texas Instruments Keystone 2 SoC";
- compatible = "ti,keystone-evm";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
@@ -64,7 +62,11 @@
#address-cells = <1>;
interrupt-controller;
reg = <0x0 0x02561000 0x0 0x1000>,
- <0x0 0x02562000 0x0 0x2000>;
+ <0x0 0x02562000 0x0 0x2000>,
+ <0x0 0x02564000 0x0 0x1000>,
+ <0x0 0x02566000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
@@ -179,5 +181,32 @@
interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
};
+
+ usb_phy: usb_phy@2620738 {
+ compatible = "ti,keystone-usbphy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2620738 32>;
+ status = "disabled";
+ };
+
+ usb: usb@2680000 {
+ compatible = "ti,keystone-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2680000 0x10000>;
+ clocks = <&clkusb>;
+ clock-names = "usb";
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ ranges;
+ status = "disabled";
+
+ dwc3@2690000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x2690000 0x70000>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+ usb-phy = <&usb_phy>, <&usb_phy>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
new file mode 100644
index 0000000..3916937
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -0,0 +1,107 @@
+/ {
+ mbus {
+ pcie-controller {
+ compatible = "marvell,kirkwood-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc 9>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gate_clk 2>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ compatible = "marvell,88f6192-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pmx_nand: pmx-nand {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp18",
+ "mpp19";
+ marvell,function = "nand";
+ };
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp5", "mpp21", "mpp23";
+ marvell,function = "sata0";
+ };
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp4", "mpp20", "mpp22";
+ marvell,function = "sata1";
+ };
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+ marvell,function = "spi";
+ };
+ pmx_twsi0: pmx-twsi0 {
+ marvell,pins = "mpp8", "mpp9";
+ marvell,function = "twsi0";
+ };
+ pmx_uart0: pmx-uart0 {
+ marvell,pins = "mpp10", "mpp11";
+ marvell,function = "uart0";
+ };
+ pmx_uart1: pmx-uart1 {
+ marvell,pins = "mpp13", "mpp14";
+ marvell,function = "uart1";
+ };
+ pmx_sdio: pmx-sdio {
+ marvell,pins = "mpp12", "mpp13", "mpp14",
+ "mpp15", "mpp16", "mpp17";
+ marvell,function = "sdio";
+ };
+ };
+
+ rtc@10300 {
+ compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <53>;
+ clocks = <&gate_clk 7>;
+ };
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <21>;
+ clocks = <&gate_clk 14>, <&gate_clk 15>;
+ clock-names = "0", "1";
+ status = "disabled";
+ };
+
+ mvsdio@90000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0x90000 0x200>;
+ interrupts = <28>;
+ clocks = <&gate_clk 4>;
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index 650ef30..416d96e 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -89,6 +89,8 @@
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
+ phys = <&sata_phy0>, <&sata_phy1>;
+ phy-names = "port0", "port1";
status = "disabled";
};
@@ -97,6 +99,8 @@
reg = <0x90000 0x200>;
interrupts = <28>;
clocks = <&gate_clk 4>;
+ pinctrl-0 = <&pmx_sdio>;
+ pinctrl-names = "default";
bus-width = <4>;
cap-sdio-irq;
cap-sd-highspeed;
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 3933a33..2902e0d 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -104,6 +104,12 @@
};
};
+ thermal@10078 {
+ compatible = "marvell,kirkwood-thermal";
+ reg = <0x10078 0x4>;
+ status = "okay";
+ };
+
rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
@@ -111,33 +117,6 @@
clocks = <&gate_clk 7>;
};
- sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <21>;
- clocks = <&gate_clk 14>, <&gate_clk 15>;
- clock-names = "0", "1";
- status = "disabled";
- };
-
- mvsdio@90000 {
- compatible = "marvell,orion-sdio";
- reg = <0x90000 0x200>;
- interrupts = <28>;
- clocks = <&gate_clk 4>;
- bus-width = <4>;
- cap-sdio-irq;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- status = "disabled";
- };
-
- thermal@10078 {
- compatible = "marvell,kirkwood-thermal";
- reg = <0x10078 0x4>;
- status = "okay";
- };
-
i2c@11100 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
@@ -149,5 +128,29 @@
status = "disabled";
};
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <21>;
+ clocks = <&gate_clk 14>, <&gate_clk 15>;
+ clock-names = "0", "1";
+ phys = <&sata_phy0>, <&sata_phy1>;
+ phy-names = "port0", "port1";
+ status = "disabled";
+ };
+
+ mvsdio@90000 {
+ compatible = "marvell,orion-sdio";
+ reg = <0x90000 0x200>;
+ interrupts = <28>;
+ clocks = <&gate_clk 4>;
+ pinctrl-0 = <&pmx_sdio>;
+ pinctrl-names = "default";
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index 142b9cd..bb4df40 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -66,8 +66,8 @@
button@1 {
label = "Power push button";
- linux,code = <116>;
- gpios = <&gpio0 16 1>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
@@ -76,17 +76,17 @@
red-fail {
label = "cloudbox:red:fail";
- gpios = <&gpio0 14 0>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
blue-sata {
label = "cloudbox:blue:sata";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
- gpios = <&gpio0 17 0>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index 053aa20..afebc15 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -51,8 +51,8 @@
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio_gpios>;
pinctrl-names = "default";
- wp-gpios = <&gpio1 5 0>;
- cd-gpios = <&gpio1 6 0>;
+ wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index e112ca6..bf7fe8a 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -24,24 +24,24 @@
blue-power {
label = "dns320:blue:power";
- gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
- linux,default-trigger = "default-on";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
blue-usb {
label = "dns320:blue:usb";
- gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
orange-l_hdd {
label = "dns320:orange:l_hdd";
- gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
orange-r_hdd {
label = "dns320:orange:r_hdd";
- gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
orange-usb {
label = "dns320:orange:usb";
- gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index 5119fb8..cb9978c 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -24,24 +24,24 @@
white-power {
label = "dns325:white:power";
- gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
- linux,default-trigger = "default-on";
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
white-usb {
label = "dns325:white:usb";
- gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
};
red-l_hdd {
label = "dns325:red:l_hdd";
- gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
red-r_hdd {
label = "dns325:red:r_hdd";
- gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+ gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
red-usb {
label = "dns325:red:usb";
- gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index aefa375..1208756 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -15,18 +15,18 @@
button@1 {
label = "Power button";
- linux,code = <116>;
- gpios = <&gpio1 2 1>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "USB unmount button";
- linux,code = <161>;
- gpios = <&gpio1 15 1>;
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
button@3 {
label = "Reset button";
- linux,code = <0x198>;
- gpios = <&gpio1 16 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
@@ -35,8 +35,8 @@
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default";
- gpios = <&gpio1 14 1
- &gpio1 13 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW
+ &gpio1 13 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 0
3000 1
6000 2>;
@@ -46,7 +46,7 @@
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
ocp@f1000000 {
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 33ff368..2a41c75 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -42,12 +42,12 @@
health {
label = "status:green:health";
- gpios = <&gpio1 14 1>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
fault {
label = "status:orange:fault";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
};
regulators {
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 6f62af9..a755837 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -87,15 +87,15 @@
bluetooth {
label = "dreamplug:blue:bluetooth";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wifi {
label = "dreamplug:green:wifi";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
wifi-ap {
label = "dreamplug:green:wifi_ap";
- gpios = <&gpio1 17 1>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index a43bebb..c2e5129 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -85,44 +85,44 @@
health {
label = "status:green:health";
- gpios = <&gpio1 14 1>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
fault {
label = "status:orange:fault";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
left0 {
label = "status:white:left0";
- gpios = <&gpio1 10 0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
left1 {
label = "status:white:left1";
- gpios = <&gpio1 11 0>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
left2 {
label = "status:white:left2";
- gpios = <&gpio1 12 0>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
left3 {
label = "status:white:left3";
- gpios = <&gpio1 13 0>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
right0 {
label = "status:white:right0";
- gpios = <&gpio1 6 0>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
right1 {
label = "status:white:right1";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
right2 {
label = "status:white:right2";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
right3 {
label = "status:white:right3";
- gpios = <&gpio1 9 0>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
};
regulators {
@@ -141,7 +141,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 0>;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
index d30a91a..0b557d5 100644
--- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
+++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
@@ -45,10 +45,10 @@
nr-ports = <1>;
};
+ /* AzureWave AW-GH381 WiFi/BT */
mvsdio@90000 {
status = "okay";
- /* No CD or WP GPIOs */
- broken-cd;
+ non-removable;
};
};
@@ -60,19 +60,19 @@
health-r {
label = "guruplug:red:health";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
health-g {
label = "guruplug:green:health";
- gpios = <&gpio1 15 1>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
wmode-r {
label = "guruplug:red:wmode";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
wmode-g {
label = "guruplug:green:wmode";
- gpios = <&gpio1 17 1>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index c5fb02f..6ccc788 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -63,13 +63,13 @@
button@1 {
label = "USB Copy";
- linux,code = <133>;
- gpios = <&gpio0 29 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Reset";
- linux,code = <0x198>;
- gpios = <&gpio0 28 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
@@ -81,16 +81,16 @@
green-os {
label = "ib62x0:green:os";
- gpios = <&gpio0 25 0>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
};
red-os {
label = "ib62x0:red:os";
- gpios = <&gpio0 22 0>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
usb-copy {
label = "ib62x0:red:usb_copy";
- gpios = <&gpio0 27 0>;
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
};
@@ -98,7 +98,7 @@
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_power_off>;
pinctrl-names = "default";
- gpios = <&gpio0 24 0>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 4a62b20..f763629 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -94,37 +94,37 @@
led-level {
label = "led_level";
- gpios = <&gpio1 9 0>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
power-blue {
label = "power:blue";
- gpios = <&gpio1 10 0>;
- linux,default-trigger = "timer";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
};
power-red {
label = "power:red";
- gpios = <&gpio1 11 0>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
usb1 {
label = "usb1:blue";
- gpios = <&gpio1 12 0>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
usb2 {
label = "usb2:blue";
- gpios = <&gpio1 13 0>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
usb3 {
label = "usb3:blue";
- gpios = <&gpio1 14 0>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
usb4 {
label = "usb4:blue";
- gpios = <&gpio1 15 0>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
otb {
label = "otb:blue";
- gpios = <&gpio1 16 0>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
};
@@ -137,14 +137,14 @@
button@1 {
label = "OTB Button";
- linux,code = <133>;
- gpios = <&gpio1 3 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
button@2 {
label = "Reset";
- linux,code = <0x198>;
- gpios = <&gpio0 12 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index d15395d..5890006 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -127,20 +127,20 @@
power_led {
label = "status:white:power_led";
- gpios = <&gpio0 16 0>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
};
rebuild_led {
label = "status:white:rebuild_led";
- gpios = <&gpio1 4 0>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
health_led {
label = "status:red:health_led";
- gpios = <&gpio1 5 0>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
backup_led {
label = "status:blue:backup_led";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
@@ -154,18 +154,18 @@
Power {
label = "Power Button";
- linux,code = <116>;
- gpios = <&gpio0 14 1>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
Reset {
label = "Reset Button";
- linux,code = <0x198>;
- gpios = <&gpio0 12 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
OTB {
label = "OTB Button";
- linux,code = <133>;
- gpios = <&gpio1 3 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index cd44f37..5b5808e 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -38,8 +38,8 @@
i2c@0 {
compatible = "i2c-gpio";
- gpios = < &gpio0 8 0 /* sda */
- &gpio0 9 0 >; /* scl */
+ gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */
+ &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */
i2c-gpio,delay-us = <2>; /* ~100 kHz */
};
};
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
new file mode 100644
index 0000000..c9e82ef
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+ model = "LaCie LaPlug";
+ compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>; /* 128 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ i2c@11000 {
+ pinctrl-0 = <&pmx_twsi0>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "at,24c04";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+ };
+
+ pinctrl: pinctrl@10000 {
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button@1{
+ label = "Power push button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-fail {
+ label = "laplug_v2:red:power";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ blue-power {
+ label = "laplug_v2:blue:power";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_enable>;
+ pinctrl-names = "default";
+
+ usb_power_back1: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power Back 1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb_power_back2: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "USB Power Back 2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb_power_front: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "USB Power Front";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ /* Total size : 512MB */
+ status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>; /* 1MB */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "uImage";
+ reg = <0x100000 0x1000000>; /* 16MB */
+ };
+
+ partition@1100000 {
+ label = "rootfs";
+ reg = <0x1100000 0x1EF00000>; /* 495MB */
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 4e8f9e4..fc1cd3b 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -108,20 +108,20 @@
button@1 {
label = "Function Button";
- linux,code = <357>;
- gpios = <&gpio1 9 1>;
+ linux,code = <KEY_OPTION>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Power-on Switch";
- linux,code = <0>;
+ linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
- gpios = <&gpio1 10 1>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
button@3 {
label = "Power-auto Switch";
- linux,code = <1>;
+ linux,code = <KEY_ESC>;
linux,input-type = <5>;
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@@ -134,28 +134,28 @@
led@1 {
label = "lsxl:blue:func";
- gpios = <&gpio1 4 1>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "lsxl:red:alarm";
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
led@3 {
label = "lsxl:amber:info";
- gpios = <&gpio1 6 1>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
led@4 {
label = "lsxl:blue:power";
- gpios = <&gpio1 7 1>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
led@5 {
label = "lsxl:red:func";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
@@ -163,13 +163,13 @@
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
- gpios = <&gpio0 19 1
- &gpio0 18 1>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_LOW
+ &gpio0 18 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 3
1500 2
3250 1
5000 0>;
- alarm-gpios = <&gpio1 8 0>;
+ alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
restart_poweroff {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 6c1ec27..c20607c 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -110,7 +110,7 @@
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
pinctrl-names = "default";
status = "okay";
- cd-gpios = <&gpio1 15 1>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
/* No WP GPIO */
};
};
@@ -126,36 +126,36 @@
health {
label = "status:green:health";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
user1o {
label = "user1:orange";
- gpios = <&gpio1 8 1>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user1g {
label = "user1:green";
- gpios = <&gpio1 9 1>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0o {
label = "user0:orange";
- gpios = <&gpio1 12 1>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0g {
label = "user0:green";
- gpios = <&gpio1 13 1>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
misc {
label = "status:orange:misc";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 6317e1d..dc86429 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -90,17 +90,17 @@
green-status {
label = "gtw:green:Status";
- gpios = <&gpio0 20 0>;
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
};
red-status {
label = "gtw:red:Status";
- gpios = <&gpio0 21 0>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "gtw:green:USB";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
};
@@ -113,13 +113,13 @@
button@1 {
label = "SWR Button";
- linux,code = <0x198>; /* KEY_RESTART */
- gpios = <&gpio1 15 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "WPS Button";
- linux,code = <0x211>; /* KEY_WPS_BUTTON */
- gpios = <&gpio1 14 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index e6a102c..4d2a8db 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -1,3 +1,14 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS Duo v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
/dts-v1/;
#include "kirkwood.dtsi"
@@ -32,41 +43,50 @@
marvell,pins = "mpp47";
marvell,function = "gpio";
};
+
pmx_button_backup: pmx-button-backup {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
+
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
+
pmx_led_blue_power: pmx-led-blue-power {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
+
pmx_led_blue_activity: pmx-led-blue-activity {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
+
pmx_led_blue_disk1: pmx-led-blue-disk1 {
marvell,pins = "mpp23";
marvell,function = "gpio";
};
+
pmx_led_blue_disk2: pmx-led-blue-disk2 {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
+
pmx_led_blue_backup: pmx-led-blue-backup {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
+
+ pmx_poweroff: pmx-poweroff {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- g762_clk: fixedclk {
+ g762_clk: g762-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <8192>;
@@ -112,69 +132,80 @@
power_led {
label = "status:blue:power_led";
- gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */
- linux,default-trigger = "default-on";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
+
activity_led {
label = "status:blue:activity_led";
- gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
+
disk1_led {
label = "status:blue:disk1_led";
- gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
+
disk2_led {
label = "status:blue:disk2_led";
- gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
+
backup_led {
label = "status:blue:backup_led";
- gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&pmx_button_power &pmx_button_backup
&pmx_button_reset>;
pinctrl-names = "default";
- button@1 {
+ power-button {
label = "Power Button";
- linux,code = <116>; /* KEY_POWER */
- gpios = <&gpio1 15 1>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
- button@2 {
+
+ reset-button {
label = "Reset Button";
- linux,code = <0x198>; /* KEY_RESTART */
- gpios = <&gpio0 13 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
- button@3 {
+
+ backup-button {
label = "Backup Button";
- linux,code = <133>; /* KEY_COPY */
- gpios = <&gpio1 13 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ };
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB 3.0 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 14 0>;
- };
- };
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_regulator: usb3-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB 3.0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&nand {
@@ -210,7 +241,7 @@
&mdio {
status = "okay";
- ethphy0: ethernet-phy@0 {
+ ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
device_type = "ethernet-phy";
reg = <0>;
};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
new file mode 100644
index 0000000..7c8a0d9
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -0,0 +1,268 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS NV+ v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+ model = "NETGEAR ReadyNAS NV+ v2";
+ compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+ memory { /* 256 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ /* Connected to NEC uPD720200 USB 3.0 controller */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pmx_button_power: pmx-button-power {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_backup: pmx-button-backup {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_blue_power: pmx-led-blue-power {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_blue_backup: pmx-led-blue-backup {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_blue_disk1: pmx-led-blue-disk1 {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_blue_disk2: pmx-led-blue-disk2 {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_blue_disk3: pmx-led-blue-disk3 {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_blue_disk4: pmx-led-blue-disk4 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_poweroff: pmx-poweroff {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+ };
+
+ clocks {
+ g762_clk: g762-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <8192>;
+ };
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ rs5c372a: rs5c372a@32 {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+
+ g762: g762@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>; /* input clock */
+ fan_gear_mode = <0>;
+ fan_startv = <1>;
+ pwm_polarity = <0>;
+ };
+ };
+
+ serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
+ status = "okay";
+ nr-ports = <1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
+ &pmx_led_blue_disk1 &pmx_led_blue_disk2
+ &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
+ pinctrl-names = "default";
+
+ power_led {
+ label = "status:blue:power_led";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ backup_led {
+ label = "status:blue:backup_led";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ };
+
+ disk1_led {
+ label = "status:blue:disk1_led";
+ gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ };
+
+ disk2_led {
+ label = "status:blue:disk2_led";
+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ };
+
+ disk3_led {
+ label = "status:blue:disk3_led";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ disk4_led {
+ label = "status:blue:disk4_led";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pmx_button_power &pmx_button_backup
+ &pmx_button_reset>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ reset-button {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ backup-button {
+ label = "Backup Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_poweroff>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_regulator: usb3-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB 3.0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x180000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x0200000 0x600000>;
+ };
+
+ partition@800000 {
+ label = "minirootfs";
+ reg = <0x0800000 0x1000000>;
+ };
+
+ partition@1800000 {
+ label = "jffs2";
+ reg = <0x1800000 0x6800000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 2fcb82e..ae1ccbe 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -64,8 +64,8 @@
button@1 {
label = "Power push button";
- linux,code = <116>;
- gpios = <&gpio1 0 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
};
@@ -74,13 +74,13 @@
red-fail {
label = "ns2:red:fail";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
- gpios = <&gpio0 31 0>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index 2796070..1f2ca60 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -25,8 +25,8 @@
blue-sata {
label = "ns2:blue:sata";
- gpios = <&gpio0 30 1>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ide-disk";
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index defdc77..72c78d0 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -22,10 +22,10 @@
gpio_fan {
compatible = "gpio-fan";
- gpios = <&gpio0 22 1
- &gpio0 7 1
- &gpio1 1 1
- &gpio0 23 1>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+ &gpio0 7 GPIO_ACTIVE_LOW
+ &gpio1 1 GPIO_ACTIVE_LOW
+ &gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
< 0 0
1500 15
@@ -36,7 +36,7 @@
3300 10
4300 9
5500 8>;
- alarm-gpios = <&gpio0 25 1>;
+ alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
ns2-leds {
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index adbafdd..c441bf6 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -23,10 +23,10 @@
gpio_fan {
compatible = "gpio-fan";
- gpios = <&gpio0 22 1
- &gpio0 7 1
- &gpio1 1 1
- &gpio0 23 1>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+ &gpio0 7 GPIO_ACTIVE_LOW
+ &gpio1 1 GPIO_ACTIVE_LOW
+ &gpio0 23 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map =
< 0 0
3000 15
@@ -37,7 +37,7 @@
7140 10
7980 9
9200 8>;
- alarm-gpios = <&gpio0 25 1>;
+ alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
ns2-leds {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
index e3f915d..aa78c2d 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -40,7 +40,7 @@
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
- gpios = <&gpio1 16 0>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
regulators {
@@ -58,7 +58,7 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 21 0>;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index b5418bc..03fa24c 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -119,18 +119,18 @@
button@1 {
label = "Power Button";
- linux,code = <116>;
- gpios = <&gpio1 14 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
button@2 {
label = "Copy Button";
- linux,code = <133>;
- gpios = <&gpio1 5 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
button@3 {
label = "Reset Button";
- linux,code = <0x198>;
- gpios = <&gpio1 4 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
};
@@ -145,43 +145,43 @@
green-sys {
label = "nsa310:green:sys";
- gpios = <&gpio0 28 0>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
red-sys {
label = "nsa310:red:sys";
- gpios = <&gpio0 29 0>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd {
label = "nsa310:green:hdd";
- gpios = <&gpio1 9 0>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
red-hdd {
label = "nsa310:red:hdd";
- gpios = <&gpio1 10 0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
green-esata {
label = "nsa310:green:esata";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
red-esata {
label = "nsa310:red:esata";
- gpios = <&gpio0 13 0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "nsa310:green:usb";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
red-usb {
label = "nsa310:red:usb";
- gpios = <&gpio0 16 0>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
green-copy {
label = "nsa310:green:copy";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
red-copy {
label = "nsa310:red:copy";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
index ab0212b..a5e7794 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310a.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -107,18 +107,18 @@
button@1 {
label = "Power Button";
- linux,code = <116>;
- gpios = <&gpio1 14 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
button@2 {
label = "Copy Button";
- linux,code = <133>;
- gpios = <&gpio1 5 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
button@3 {
label = "Reset Button";
- linux,code = <0x198>;
- gpios = <&gpio1 4 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
};
@@ -127,39 +127,39 @@
green-sys {
label = "nsa310:green:sys";
- gpios = <&gpio0 28 0>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
red-sys {
label = "nsa310:red:sys";
- gpios = <&gpio0 29 0>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
green-hdd {
label = "nsa310:green:hdd";
- gpios = <&gpio1 9 0>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
red-hdd {
label = "nsa310:red:hdd";
- gpios = <&gpio1 10 0>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
green-esata {
label = "nsa310:green:esata";
- gpios = <&gpio0 12 0>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
red-esata {
label = "nsa310:red:esata";
- gpios = <&gpio0 13 0>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
green-usb {
label = "nsa310:green:usb";
- gpios = <&gpio0 15 0>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
green-copy {
label = "nsa310:green:copy";
- gpios = <&gpio1 7 0>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
red-copy {
label = "nsa310:red:copy";
- gpios = <&gpio1 8 0>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index f0e3d21..5c6a4f1 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -101,17 +101,17 @@
led-red {
label = "obsa6:red:stat";
- gpios = <&gpio1 9 1>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
led-green {
label = "obsa6:green:stat";
- gpios = <&gpio1 10 1>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
led-yellow {
label = "obsa6:yellow:stat";
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@@ -124,8 +124,8 @@
button@1 {
label = "Init Button";
- linux,code = <116>;
- gpios = <&gpio1 6 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
index 851fb2a..c054ef6 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -126,17 +126,17 @@
led-red {
label = "obsa7:red:stat";
- gpios = <&gpio1 9 1>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
led-green {
label = "obsa7:green:stat";
- gpios = <&gpio1 10 1>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
led-yellow {
label = "obsa7:yellow:stat";
- gpios = <&gpio1 11 1>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
@@ -149,8 +149,8 @@
button@1 {
label = "Init Button";
- linux,code = <116>;
- gpios = <&gpio1 6 0>;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
index 1173d7f..7b1cd99 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
@@ -1,5 +1,5 @@
/*
- * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
+ * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
*
* Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
*
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
index eac6a21..e2b4ea4 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts
@@ -24,8 +24,8 @@
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
pinctrl-names = "default";
status = "okay";
- cd-gpios = <&gpio1 12 1>;
- wp-gpios = <&gpio1 15 0>;
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
};
@@ -36,8 +36,8 @@
health {
label = "sheevaplug:blue:health";
- gpios = <&gpio1 17 1>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
index bb61918..82f6abf 100644
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
@@ -1,5 +1,5 @@
/*
- * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug
+ * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
*
* Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
*
@@ -31,13 +31,13 @@
health {
label = "sheevaplug:blue:health";
- gpios = <&gpio1 17 1>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
};
misc {
label = "sheevaplug:red:misc";
- gpios = <&gpio1 14 1>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 320da67..40d6adf 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -131,25 +131,25 @@
disk {
label = "topkick:yellow:disk";
- gpios = <&gpio0 21 1>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "ide-disk";
};
system2 {
label = "topkick:red:system";
- gpios = <&gpio1 5 1>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
system {
label = "topkick:blue:system";
- gpios = <&gpio1 6 1>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wifi {
label = "topkick:green:wifi";
- gpios = <&gpio1 7 1>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "topkick:yellow:wifi";
- gpios = <&gpio1 16 1>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
regulators {
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index f755bc1..c17ae45 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -41,13 +41,13 @@
button@1 {
label = "USB Copy";
- linux,code = <133>;
- gpios = <&gpio0 15 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Reset";
- linux,code = <0x198>;
- gpios = <&gpio0 16 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index 345562f..0713d072 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -51,13 +51,13 @@
button@1 {
label = "USB Copy";
- linux,code = <133>;
- gpios = <&gpio1 11 1>;
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Reset";
- linux,code = <0x198>;
- gpios = <&gpio1 5 1>;
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 8b73c80..81e6c40 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,4 +1,6 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
@@ -68,39 +70,21 @@
#address-cells = <1>;
#size-cells = <1>;
- mbusc: mbus-controller@20000 {
- compatible = "marvell,mbus-controller";
- reg = <0x20000 0x80>, <0x1500 0x20>;
- };
-
- timer: timer@20300 {
- compatible = "marvell,orion-timer";
- reg = <0x20300 0x20>;
- interrupt-parent = <&bridge_intc>;
- interrupts = <1>, <2>;
- clocks = <&core_clk 0>;
- };
-
- intc: main-interrupt-ctrl@20200 {
- compatible = "marvell,orion-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20200 0x10>, <0x20210 0x10>;
- };
-
- bridge_intc: bridge-interrupt-ctrl@20110 {
- compatible = "marvell,orion-bridge-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x20110 0x8>;
- interrupts = <1>;
- marvell,#interrupts = <6>;
- };
-
core_clk: core-clocks@10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;
- #clock-cells = <1>;
+ #clock-cells = <1>;
+ };
+
+ spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <23>;
+ reg = <0x10600 0x28>;
+ clocks = <&gate_clk 7>;
+ status = "disabled";
};
gpio0: gpio@10100 {
@@ -127,6 +111,17 @@
clocks = <&gate_clk 7>;
};
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <29>;
+ clock-frequency = <100000>;
+ clocks = <&gate_clk 7>;
+ status = "disabled";
+ };
+
serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
@@ -145,15 +140,18 @@
status = "disabled";
};
- spi@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <23>;
- reg = <0x10600 0x28>;
- clocks = <&gate_clk 7>;
- status = "disabled";
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x80>, <0x1500 0x20>;
+ };
+
+ bridge_intc: bridge-interrupt-ctrl@20110 {
+ compatible = "marvell,orion-bridge-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20110 0x8>;
+ interrupts = <1>;
+ marvell,#interrupts = <6>;
};
gate_clk: clock-gating-control@2011c {
@@ -163,6 +161,21 @@
#clock-cells = <1>;
};
+ intc: main-interrupt-ctrl@20200 {
+ compatible = "marvell,orion-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x10>, <0x20210 0x10>;
+ };
+
+ timer: timer@20300 {
+ compatible = "marvell,orion-timer";
+ reg = <0x20300 0x20>;
+ interrupt-parent = <&bridge_intc>;
+ interrupts = <1>, <2>;
+ clocks = <&core_clk 0>;
+ };
+
wdt: watchdog-timer@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
@@ -172,6 +185,14 @@
status = "okay";
};
+ ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ clocks = <&gate_clk 3>;
+ status = "okay";
+ };
+
xor@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
@@ -212,37 +233,6 @@
};
};
- ehci@50000 {
- compatible = "marvell,orion-ehci";
- reg = <0x50000 0x1000>;
- interrupts = <19>;
- clocks = <&gate_clk 3>;
- status = "okay";
- };
-
- i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <29>;
- clock-frequency = <100000>;
- clocks = <&gate_clk 7>;
- status = "disabled";
- };
-
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <46>;
- clocks = <&gate_clk 0>;
- status = "disabled";
-
- /* add phy nodes in board file */
- };
-
eth0: ethernet-controller@72000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
@@ -263,6 +253,18 @@
};
};
+ mdio: mdio-bus@72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <46>;
+ clocks = <&gate_clk 0>;
+ status = "disabled";
+
+ /* add phy nodes in board file */
+ };
+
eth1: ethernet-controller@76000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
@@ -282,5 +284,23 @@
/* set phy-handle property in board file */
};
};
+
+ sata_phy0: sata-phy@82000 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0x82000 0x0334>;
+ clocks = <&gate_clk 14>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
+
+ sata_phy1: sata-phy@84000 {
+ compatible = "marvell,mvebu-sata-phy";
+ reg = <0x84000 0x0334>;
+ clocks = <&gate_clk 15>;
+ clock-names = "sata";
+ #phy-cells = <0>;
+ status = "ok";
+ };
};
};
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
new file mode 100644
index 0000000..90749d5
--- /dev/null
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -0,0 +1,109 @@
+/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+/include/ "moxart.dtsi"
+
+/ {
+ model = "MOXA UC-7112-LX";
+ compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ flash@80000000,0 {
+ compatible = "numonyx,js28f128", "cfi-flash";
+ reg = <0x80000000 0x1000000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x40000>;
+ };
+ partition@40000 {
+ label = "linux kernel";
+ reg = <0x40000 0x1C0000>;
+ };
+ partition@200000 {
+ label = "root filesystem";
+ reg = <0x200000 0x800000>;
+ };
+ partition@a00000 {
+ label = "user filesystem";
+ reg = <0xa00000 0x600000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ user-led {
+ label = "ready-led";
+ gpios = <&gpio 27 0x1>;
+ default-state = "on";
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <500>;
+ button@25 {
+ label = "GPIO Reset";
+ linux,code = <116>;
+ gpios = <&gpio 25 1>;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
+ };
+};
+
+&clk_pll {
+ clocks = <&ref12>;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ ethphy0: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&mac0 {
+ status = "okay";
+};
+
+&mac1 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
new file mode 100644
index 0000000..da1d8ef
--- /dev/null
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -0,0 +1,154 @@
+/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "moxa,moxart";
+ model = "MOXART";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "faraday,fa526";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ref12: ref12M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x90000000 0x10000000>;
+ ranges;
+
+ intc: interrupt-controller@98800000 {
+ compatible = "moxa,moxart-ic";
+ reg = <0x98800000 0x38>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-mask = <0x00080000>;
+ };
+
+ clk_pll: clk_pll@98100000 {
+ compatible = "moxa,moxart-pll-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ };
+
+ clk_apb: clk_apb@98100000 {
+ compatible = "moxa,moxart-apb-clock";
+ #clock-cells = <0>;
+ reg = <0x98100000 0x34>;
+ clocks = <&clk_pll>;
+ };
+
+ timer: timer@98400000 {
+ compatible = "moxa,moxart-timer";
+ reg = <0x98400000 0x42>;
+ interrupts = <19 1>;
+ clocks = <&clk_apb>;
+ };
+
+ gpio: gpio@98700000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ compatible = "moxa,moxart-gpio";
+ reg = <0x98700000 0xC>;
+ };
+
+ rtc: rtc {
+ compatible = "moxa,moxart-rtc";
+ gpio-rtc-sclk = <&gpio 5 0>;
+ gpio-rtc-data = <&gpio 6 0>;
+ gpio-rtc-reset = <&gpio 7 0>;
+ };
+
+ dma: dma@90500000 {
+ compatible = "moxa,moxart-dma";
+ reg = <0x90500080 0x40>;
+ interrupts = <24 0>;
+ #dma-cells = <1>;
+ };
+
+ watchdog: watchdog@98500000 {
+ compatible = "moxa,moxart-watchdog";
+ reg = <0x98500000 0x10>;
+ clocks = <&clk_apb>;
+ };
+
+ sdhci: sdhci@98e00000 {
+ compatible = "moxa,moxart-sdhci";
+ reg = <0x98e00000 0x5C>;
+ interrupts = <5 0>;
+ clocks = <&clk_apb>;
+ dmas = <&dma 5>,
+ <&dma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mdio0: mdio@90900090 {
+ compatible = "moxa,moxart-mdio";
+ reg = <0x90900090 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mdio1: mdio@92000090 {
+ compatible = "moxa,moxart-mdio";
+ reg = <0x92000090 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mac0: mac@90900000 {
+ compatible = "moxa,moxart-mac";
+ reg = <0x90900000 0x90>;
+ interrupts = <25 0>;
+ phy-handle = <ðphy0>;
+ phy-mode = "mii";
+ status = "disabled";
+ };
+
+ mac1: mac@92000000 {
+ compatible = "moxa,moxart-mac";
+ reg = <0x92000000 0x90>;
+ interrupts = <27 0>;
+ phy-handle = <ðphy1>;
+ phy-mode = "mii";
+ status = "disabled";
+ };
+
+ uart0: uart@98200000 {
+ compatible = "ns16550a";
+ reg = <0x98200000 0x20>;
+ interrupts = <31 8>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <14745600>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index aed83de..fcc5bb6 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -58,7 +58,7 @@
status = "okay";
ethphy: ethernet-phy {
- device-type = "ethernet-phy";
+ device_type = "ethernet-phy";
reg = <8>;
};
};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index e06c37e..9f51538 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -42,6 +42,25 @@
interrupts = <6>, <7>, <8>, <9>;
};
+ spi@10600 {
+ compatible = "marvell,orion-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ reg = <0x10600 0x28>;
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <5>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
@@ -60,15 +79,6 @@
status = "disabled";
};
- spi@10600 {
- compatible = "marvell,orion-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- reg = <0x10600 0x28>;
- status = "disabled";
- };
-
wdt@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
@@ -82,30 +92,6 @@
status = "disabled";
};
- ehci@a0000 {
- compatible = "marvell,orion-ehci";
- reg = <0xa0000 0x1000>;
- interrupts = <12>;
- status = "disabled";
- };
-
- sata@80000 {
- compatible = "marvell,orion-sata";
- reg = <0x80000 0x5000>;
- interrupts = <29>;
- status = "disabled";
- };
-
- i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
- reg = <0x11000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <5>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
xor@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
@@ -125,26 +111,6 @@
};
};
- crypto@90000 {
- compatible = "marvell,orion-crypto";
- reg = <0x90000 0x10000>,
- <0xf2200000 0x800>;
- reg-names = "regs", "sram";
- interrupts = <28>;
- status = "okay";
- };
-
- mdio: mdio-bus@72004 {
- compatible = "marvell,orion-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72004 0x84>;
- interrupts = <22>;
- status = "disabled";
-
- /* add phy nodes in board file */
- };
-
eth: ethernet-controller@72000 {
compatible = "marvell,orion-eth";
#address-cells = <1>;
@@ -162,5 +128,39 @@
/* set phy-handle property in board file */
};
};
+
+ mdio: mdio-bus@72004 {
+ compatible = "marvell,orion-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72004 0x84>;
+ interrupts = <22>;
+ status = "disabled";
+
+ /* add phy nodes in board file */
+ };
+
+ sata@80000 {
+ compatible = "marvell,orion-sata";
+ reg = <0x80000 0x5000>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ crypto@90000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x90000 0x10000>,
+ <0xf2200000 0x800>;
+ reg-names = "regs", "sram";
+ interrupts = <28>;
+ status = "okay";
+ };
+
+ ehci@a0000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0xa0000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index d7c5d72..a705469 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -10,5 +10,29 @@
marvell,intc-priority;
marvell,intc-nr-irqs = <34>;
};
+
+ pwm0: pwm@40b00000 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40b00000 0x10>;
+ #pwm-cells = <1>;
+ };
+
+ pwm1: pwm@40b00010 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40b00010 0x10>;
+ #pwm-cells = <1>;
+ };
+
+ pwm2: pwm@40c00000 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40c00000 0x10>;
+ #pwm-cells = <1>;
+ };
+
+ pwm3: pwm@40c00010 {
+ compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+ reg = <0x40c00010 0x10>;
+ #pwm-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
new file mode 100644
index 0000000..6ac9496
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -0,0 +1,97 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8974";
+ compatible = "qcom,msm8974";
+ interrupt-parent = <&intc>;
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@f9000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0xf9000000 0x1000>,
+ <0xf9002000 0x1000>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <19200000>;
+ };
+
+ timer@f9020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0xf9020000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@f9021000 {
+ frame-number = <0>;
+ interrupts = <0 8 0x4>,
+ <0 7 0x4>;
+ reg = <0xf9021000 0x1000>,
+ <0xf9022000 0x1000>;
+ };
+
+ frame@f9023000 {
+ frame-number = <1>;
+ interrupts = <0 9 0x4>;
+ reg = <0xf9023000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9024000 {
+ frame-number = <2>;
+ interrupts = <0 10 0x4>;
+ reg = <0xf9024000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9025000 {
+ frame-number = <3>;
+ interrupts = <0 11 0x4>;
+ reg = <0xf9025000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9026000 {
+ frame-number = <4>;
+ interrupts = <0 12 0x4>;
+ reg = <0xf9026000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9027000 {
+ frame-number = <5>;
+ interrupts = <0 13 0x4>;
+ reg = <0xf9027000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@f9028000 {
+ frame-number = <6>;
+ interrupts = <0 14 0x4>;
+ reg = <0xf9028000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 1fb20f2..b1deaf7 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "r7s72100.dtsi"
+#include "r7s72100.dtsi"
/ {
model = "Genmai";
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
index 9443e93..70b1fff 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "r8a73a4.dtsi"
+#include "r8a73a4.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -25,6 +25,11 @@
reg = <0 0x40000000 0 0x40000000>;
};
+ memory@200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
+ };
+
vcc_mmc0: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "MMC0 Vcc";
@@ -88,22 +93,22 @@
pinctrl-0 = <&scifa0_pins>;
pinctrl-names = "default";
- scifa0_pins: scifa0 {
+ scifa0_pins: serial0 {
renesas,groups = "scifa0_data";
renesas,function = "scifa0";
};
- mmc0_pins: mmcif {
+ mmc0_pins: mmc {
renesas,groups = "mmc0_data8", "mmc0_ctrl";
renesas,function = "mmc0";
};
- sdhi0_pins: sdhi0 {
+ sdhi0_pins: sd0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
renesas,function = "sdhi0";
};
- sdhi1_pins: sdhi1 {
+ sdhi1_pins: sd1 {
renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
renesas,function = "sdhi1";
};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 91436b5..ce085fa 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -9,7 +9,8 @@
*/
/dts-v1/;
-/include/ "r8a73a4.dtsi"
+#include "r8a73a4.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "APE6EVM";
@@ -24,6 +25,11 @@
reg = <0 0x40000000 0 0x40000000>;
};
+ memory@200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
+ };
+
ape6evm_fixed_3v3: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "3V3";
@@ -40,7 +46,7 @@
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <0x08000000 0x1000>;
interrupt-parent = <&irqc1>;
- interrupts = <8 0x4>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
phy-mode = "mii";
reg-io-width = <4>;
smsc,irq-active-high;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 287e047..62d0211 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -9,6 +9,9 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,r8a73a4";
interrupt-parent = <&gic>;
@@ -36,15 +39,15 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
irqc0: interrupt-controller@e61c0000 {
@@ -53,14 +56,38 @@
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
- interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>,
- <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
- <0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>,
- <0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>,
- <0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>,
- <0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>,
- <0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>,
- <0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
};
irqc1: interrupt-controller@e61c0200 {
@@ -69,13 +96,32 @@
interrupt-controller;
reg = <0 0xe61c0200 0 0x200>;
interrupt-parent = <&gic>;
- interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>,
- <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
- <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>,
- <0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>,
- <0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>,
- <0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>,
- <0 56 4>, <0 57 4>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>,
+ <0 46 IRQ_TYPE_LEVEL_HIGH>,
+ <0 47 IRQ_TYPE_LEVEL_HIGH>,
+ <0 48 IRQ_TYPE_LEVEL_HIGH>,
+ <0 49 IRQ_TYPE_LEVEL_HIGH>,
+ <0 50 IRQ_TYPE_LEVEL_HIGH>,
+ <0 51 IRQ_TYPE_LEVEL_HIGH>,
+ <0 52 IRQ_TYPE_LEVEL_HIGH>,
+ <0 53 IRQ_TYPE_LEVEL_HIGH>,
+ <0 54 IRQ_TYPE_LEVEL_HIGH>,
+ <0 55 IRQ_TYPE_LEVEL_HIGH>,
+ <0 56 IRQ_TYPE_LEVEL_HIGH>,
+ <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
dmac: dma-multiplexer@0 {
@@ -91,27 +137,27 @@
compatible = "renesas,shdma-r8a73a4";
reg = <0 0xe6700020 0 0x89e0>;
interrupt-parent = <&gic>;
- interrupts = <0 220 4
- 0 200 4
- 0 201 4
- 0 202 4
- 0 203 4
- 0 204 4
- 0 205 4
- 0 206 4
- 0 207 4
- 0 208 4
- 0 209 4
- 0 210 4
- 0 211 4
- 0 212 4
- 0 213 4
- 0 214 4
- 0 215 4
- 0 216 4
- 0 217 4
- 0 218 4
- 0 219 4>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH
+ 0 215 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -126,7 +172,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupt-parent = <&gic>;
- interrupts = <0 69 4>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
i2c0: i2c@e6500000 {
@@ -135,7 +181,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 174 0x4>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -145,7 +191,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 175 0x4>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -155,7 +201,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 176 0x4>;
+ interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -165,7 +211,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 177 0x4>;
+ interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -175,7 +221,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 178 0x4>;
+ interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -185,7 +231,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 179 0x4>;
+ interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -195,7 +241,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 184 0x4>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -205,7 +251,7 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 185 0x4>;
+ interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -215,24 +261,24 @@
compatible = "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
interrupt-parent = <&gic>;
- interrupts = <0 173 0x4>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- mmcif0: mmcif@ee200000 {
+ mmcif0: mmc@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupt-parent = <&gic>;
- interrupts = <0 169 0x4>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <4>;
status = "disabled";
};
- mmcif1: mmcif@ee220000 {
+ mmcif1: mmc@ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupt-parent = <&gic>;
- interrupts = <0 170 0x4>;
+ interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <4>;
status = "disabled";
};
@@ -242,31 +288,47 @@
reg = <0 0xe6050000 0 0x9000>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts-extended =
+ <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
+ <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
+ <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+ <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+ <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+ <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+ <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+ <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+ <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
+ <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
+ <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+ <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+ <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+ <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+ <&irqc1 24 0>, <&irqc1 25 0>;
};
- sdhi0: sdhi@ee100000 {
+ sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 165 4>;
+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
status = "disabled";
};
- sdhi1: sdhi@ee120000 {
+ sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 166 4>;
+ interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
status = "disabled";
};
- sdhi2: sdhi@ee140000 {
+ sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 167 4>;
+ interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 1c56c5e..95a849b 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -9,8 +9,9 @@
*/
/dts-v1/;
-/include/ "r8a7740.dtsi"
+#include "r8a7740.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -62,6 +63,44 @@
enable-active-high;
};
+ reg_5p0v: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5.0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power-key {
+ gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "SW3";
+ gpio-key,wakeup;
+ };
+
+ back-key {
+ gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+ linux,code = <158>;
+ label = "SW4";
+ };
+
+ menu-key {
+ gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+ linux,code = <139>;
+ label = "SW5";
+ };
+
+ home-key {
+ gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+ linux,code = <102>;
+ label = "SW6";
+ };
+ };
+
leds {
compatible = "gpio-leds";
led1 {
@@ -85,32 +124,58 @@
default-brightness-level = <9>;
pinctrl-0 = <&backlight_pins>;
pinctrl-names = "default";
+ power-supply = <®_5p0v>;
+ enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ bitclock-inversion;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8978>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <12288000>;
+ };
};
};
&i2c0 {
status = "okay";
- touchscreen: st1232@55 {
+ touchscreen@55 {
compatible = "sitronix,st1232";
reg = <0x55>;
interrupt-parent = <&irqpin1>;
- interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&st1232_pins>;
pinctrl-names = "default";
gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
};
+
+ wm8978: wm8978@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8978";
+ reg = <0x1a>;
+ };
};
&pfc {
pinctrl-0 = <&scifa1_pins>;
pinctrl-names = "default";
- scifa1_pins: scifa1 {
+ scifa1_pins: serial1 {
renesas,groups = "scifa1_data";
renesas,function = "scifa1";
};
- st1232_pins: st1232 {
+ st1232_pins: touchscreen {
renesas,groups = "intc_irq10";
renesas,function = "intc";
};
@@ -125,10 +190,16 @@
renesas,function = "mmc0";
};
- sdhi0_pins: sdhi0 {
+ sdhi0_pins: sd0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
renesas,function = "sdhi0";
};
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
+ "fsia_data_in_1", "fsia_data_out_0";
+ renesas,function = "fsia";
+ };
};
&tpu {
@@ -155,3 +226,10 @@
cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
status = "okay";
};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 426cd9c..a06a11e 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "r8a7740.dtsi"
+#include "r8a7740.dtsi"
/ {
model = "armadillo 800 eva";
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index ae1e230..8280884 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -10,6 +10,8 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,r8a7740";
@@ -34,12 +36,12 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 83 4>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
};
/* irqpin0: IRQ0 - IRQ7 */
irqpin0: irqpin@e6900000 {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900000 4>,
@@ -48,19 +50,19 @@
<0xe6900040 1>,
<0xe6900060 1>;
interrupt-parent = <&gic>;
- interrupts = <0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH>;
};
/* irqpin1: IRQ8 - IRQ15 */
irqpin1: irqpin@e6900004 {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900004 4>,
@@ -69,19 +71,19 @@
<0xe6900044 1>,
<0xe6900064 1>;
interrupt-parent = <&gic>;
- interrupts = <0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH>;
};
/* irqpin2: IRQ16 - IRQ23 */
irqpin2: irqpin@e6900008 {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900008 4>,
@@ -90,19 +92,19 @@
<0xe6900048 1>,
<0xe6900068 1>;
interrupt-parent = <&gic>;
- interrupts = <0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH>;
};
/* irqpin3: IRQ24 - IRQ31 */
irqpin3: irqpin@e690000c {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe690000c 4>,
@@ -111,14 +113,14 @@
<0xe690004c 1>,
<0xe690006c 1>;
interrupt-parent = <&gic>;
- interrupts = <0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4
- 0 149 0x4>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH
+ 0 149 IRQ_TYPE_LEVEL_HIGH>;
};
i2c0: i2c@fff20000 {
@@ -127,10 +129,10 @@
compatible = "renesas,rmobile-iic";
reg = <0xfff20000 0x425>;
interrupt-parent = <&gic>;
- interrupts = <0 201 0x4
- 0 202 0x4
- 0 203 0x4
- 0 204 0x4>;
+ interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -140,10 +142,10 @@
compatible = "renesas,rmobile-iic";
reg = <0xe6c20000 0x425>;
interrupt-parent = <&gic>;
- interrupts = <0 70 0x4
- 0 71 0x4
- 0 72 0x4
- 0 73 0x4>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
+ 0 71 IRQ_TYPE_LEVEL_HIGH
+ 0 72 IRQ_TYPE_LEVEL_HIGH
+ 0 73 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -153,6 +155,15 @@
<0xe605800c 0x20>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts-extended =
+ <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+ <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+ <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+ <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+ <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+ <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+ <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
};
tpu: pwm@e6600000 {
@@ -162,36 +173,57 @@
#pwm-cells = <3>;
};
- mmcif0: mmcif@e6bd0000 {
+ mmcif0: mmc@e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 56 4
- 0 57 4>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
+ 0 57 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- sdhi0: sdhi@e6850000 {
+ sdhi0: sd@e6850000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6850000 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 117 4
- 0 118 4
- 0 119 4>;
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
+ 0 118 IRQ_TYPE_LEVEL_HIGH
+ 0 119 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
};
- sdhi1: sdhi@e6860000 {
+ sdhi1: sd@e6860000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6860000 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 121 4
- 0 122 4
- 0 123 4>;
+ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
+ 0 122 IRQ_TYPE_LEVEL_HIGH
+ 0 123 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
};
+
+ sdhi2: sd@e6870000 {
+ compatible = "renesas,sdhi-r8a7740";
+ reg = <0xe6870000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
+ 0 126 IRQ_TYPE_LEVEL_HIGH
+ 0 127 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sh_fsi2: sound@fe1f0000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,sh_fsi2";
+ reg = <0xfe1f0000 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 9 0x4>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index 969e386..bb62c7a 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -15,7 +15,8 @@
*/
/dts-v1/;
-/include/ "r8a7778.dtsi"
+#include "r8a7778.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "bockw";
@@ -45,13 +46,65 @@
phy-mode = "mii";
interrupt-parent = <&irqpin>;
- interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
reg-io-width = <4>;
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
+
+};
+
+&mmcif {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <8>;
+ broken-cd;
+ status = "okay";
};
&irqpin {
status = "okay";
};
+
+&pfc {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_a", "scif0_ctrl";
+ renesas,function = "scif0";
+ };
+
+ mmc_pins: mmc {
+ renesas,groups = "mmc_data8", "mmc_ctrl";
+ renesas,function = "mmc";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
+ "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ hspi0_pins: hspi0 {
+ renesas,groups = "hspi0_a";
+ renesas,function = "hspi0";
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&hspi0 {
+ pinctrl-0 = <&hspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 12bbebc..46a884d 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -15,7 +15,7 @@
*/
/dts-v1/;
-/include/ "r8a7778.dtsi"
+#include "r8a7778.dtsi"
/ {
model = "bockw";
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index a6308a3..ddb3bd7 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -16,6 +16,8 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,r8a7778";
@@ -25,6 +27,12 @@
};
};
+ aliases {
+ spi0 = &hspi0;
+ spi1 = &hspi1;
+ spi2 = &hspi2;
+ };
+
gic: interrupt-controller@fe438000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -35,7 +43,7 @@
/* irqpin: IRQ0 - IRQ3 */
irqpin: irqpin@fe78001c {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
status = "disabled"; /* default off */
@@ -45,10 +53,10 @@
<0xfe780044 4>,
<0xfe780064 4>;
interrupt-parent = <&gic>;
- interrupts = <0 27 0x4
- 0 28 0x4
- 0 29 0x4
- 0 30 0x4>;
+ interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
+ 0 28 IRQ_TYPE_LEVEL_HIGH
+ 0 29 IRQ_TYPE_LEVEL_HIGH
+ 0 30 IRQ_TYPE_LEVEL_HIGH>;
sense-bitfield-width = <2>;
};
@@ -56,7 +64,7 @@
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 103 0x4>;
+ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -68,7 +76,7 @@
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 103 0x4>;
+ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
@@ -80,7 +88,7 @@
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 103 0x4>;
+ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -92,7 +100,7 @@
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 103 0x4>;
+ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -104,7 +112,7 @@
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 103 0x4>;
+ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 27>;
@@ -114,6 +122,148 @@
pfc: pfc@fffc0000 {
compatible = "renesas,pfc-r8a7778";
- reg = <0xfffc000 0x118>;
+ reg = <0xfffc0000 0x118>;
+ };
+
+ i2c0: i2c@ffc70000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc70000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc71000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc71000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc72000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc72000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc73000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc73000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmcif: mmc@ffe4e000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0xffe4e000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdhi0: sd@ffe4c000 {
+ compatible = "renesas,sdhi-r8a7778";
+ reg = <0xffe4c000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ffe4d000 {
+ compatible = "renesas,sdhi-r8a7778";
+ reg = <0xffe4d000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ffe4f000 {
+ compatible = "renesas,sdhi-r8a7778";
+ reg = <0xffe4f000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ffc70000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc70000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc71000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc71000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc72000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc72000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc73000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7778";
+ reg = <0xffc73000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hspi0: spi@fffc7000 {
+ compatible = "renesas,hspi";
+ reg = <0xfffc7000 0x18>;
+ interrupt-controller = <&gic>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hspi1: spi@fffc8000 {
+ compatible = "renesas,hspi";
+ reg = <0xfffc8000 0x18>;
+ interrupt-controller = <&gic>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hspi2: spi@fffc6000 {
+ compatible = "renesas,hspi";
+ reg = <0xfffc6000 0x18>;
+ interrupt-controller = <&gic>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index ab4110a..76f5eef 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -10,8 +10,9 @@
*/
/dts-v1/;
-/include/ "r8a7779.dtsi"
+#include "r8a7779.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "marzen";
@@ -43,7 +44,7 @@
phy-mode = "mii";
interrupt-parent = <&irqpin0>;
- interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
reg-io-width = <4>;
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
@@ -68,7 +69,7 @@
};
&pfc {
- pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
+ pinctrl-0 = <&scif2_pins &scif4_pins>;
pinctrl-names = "default";
lan0_pins: lan0 {
@@ -82,19 +83,38 @@
};
};
- scif2_pins: scif2 {
+ scif2_pins: serial2 {
renesas,groups = "scif2_data_c";
renesas,function = "scif2";
};
- scif4_pins: scif4 {
+ scif4_pins: serial4 {
renesas,groups = "scif4_data";
renesas,function = "scif4";
};
- sdhi0_pins: sdhi0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
- "sdhi0_wp";
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
renesas,function = "sdhi0";
};
+
+ hspi0_pins: hspi0 {
+ renesas,groups = "hspi0";
+ renesas,function = "hspi0";
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&hspi0 {
+ pinctrl-0 = <&hspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index f3f7f79..a7af2c2 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "r8a7779.dtsi"
+#include "r8a7779.dtsi"
/ {
model = "marzen";
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 19faeac..d0561d4 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -11,6 +11,8 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,r8a7779";
@@ -40,6 +42,12 @@
};
};
+ aliases {
+ spi0 = &hspi0;
+ spi1 = &hspi1;
+ spi2 = &hspi2;
+ };
+
gic: interrupt-controller@f0001000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -52,7 +60,7 @@
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 141 0x4>;
+ interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -64,7 +72,7 @@
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 142 0x4>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
@@ -76,7 +84,7 @@
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 143 0x4>;
+ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -88,7 +96,7 @@
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 144 0x4>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -100,7 +108,7 @@
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 145 0x4>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -112,7 +120,7 @@
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc45000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 146 0x4>;
+ interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
@@ -124,7 +132,7 @@
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc46000 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 147 0x4>;
+ interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 9>;
@@ -133,7 +141,7 @@
};
irqpin0: irqpin@fe780010 {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
#interrupt-cells = <2>;
status = "disabled";
interrupt-controller;
@@ -143,50 +151,50 @@
<0xfe780044 4>,
<0xfe780064 4>;
interrupt-parent = <&gic>;
- interrupts = <0 27 0x4
- 0 28 0x4
- 0 29 0x4
- 0 30 0x4>;
+ interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
+ 0 28 IRQ_TYPE_LEVEL_HIGH
+ 0 29 IRQ_TYPE_LEVEL_HIGH
+ 0 30 IRQ_TYPE_LEVEL_HIGH>;
sense-bitfield-width = <2>;
};
i2c0: i2c@ffc70000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,i2c-r8a7779";
reg = <0xffc70000 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 79 0x4>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c1: i2c@ffc71000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,i2c-r8a7779";
reg = <0xffc71000 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 82 0x4>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c2: i2c@ffc72000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,i2c-r8a7779";
reg = <0xffc72000 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 80 0x4>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
i2c3: i2c@ffc73000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,i2c-r8a7779";
reg = <0xffc73000 0x1000>;
interrupt-parent = <&gic>;
- interrupts = <0 81 0x4>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -204,6 +212,70 @@
compatible = "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupt-parent = <&gic>;
- interrupts = <0 100 0x4>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sdhi0: sd@ffe4c000 {
+ compatible = "renesas,sdhi-r8a7779";
+ reg = <0xffe4c000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ffe4d000 {
+ compatible = "renesas,sdhi-r8a7779";
+ reg = <0xffe4d000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ffe4e000 {
+ compatible = "renesas,sdhi-r8a7779";
+ reg = <0xffe4e000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sdhi3: sd@ffe4f000 {
+ compatible = "renesas,sdhi-r8a7779";
+ reg = <0xffe4f000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ hspi0: spi@fffc7000 {
+ compatible = "renesas,hspi";
+ reg = <0xfffc7000 0x18>;
+ interrupt-controller = <&gic>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hspi1: spi@fffc8000 {
+ compatible = "renesas,hspi";
+ reg = <0xfffc8000 0x18>;
+ interrupt-controller = <&gic>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ hspi2: spi@fffc6000 {
+ compatible = "renesas,hspi";
+ reg = <0xfffc6000 0x18>;
+ interrupt-controller = <&gic>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/r8a7790-lager-reference.dts b/arch/arm/boot/dts/r8a7790-lager-reference.dts
deleted file mode 100644
index c462ef1..0000000
--- a/arch/arm/boot/dts/r8a7790-lager-reference.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Device Tree Source for the Lager board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-/include/ "r8a7790.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Lager";
- compatible = "renesas,lager-reference", "renesas,r8a7790";
-
- chosen {
- bootargs = "console=ttySC6,115200 ignore_loglevel rw";
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x80000000>;
- };
-
- lbsc {
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- leds {
- compatible = "gpio-leds";
- led6 {
- gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
- };
- led7 {
- gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
- };
- led8 {
- gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 203bd08..57569cb 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -9,7 +9,8 @@
*/
/dts-v1/;
-/include/ "r8a7790.dtsi"
+#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Lager";
@@ -24,8 +25,69 @@
reg = <0 0x40000000 0 0x80000000>;
};
+ memory@180000000 {
+ device_type = "memory";
+ reg = <1 0x80000000 0 0x80000000>;
+ };
+
lbsc {
#address-cells = <1>;
#size-cells = <1>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led6 {
+ gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ };
+ led7 {
+ gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+ };
+ led8 {
+ gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ fixedregulator3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif0_pins &scif1_pins>;
+ pinctrl-names = "default";
+
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data";
+ renesas,function = "scif0";
+ };
+
+ scif1_pins: serial1 {
+ renesas,groups = "scif1_data";
+ renesas,function = "scif1";
+ };
+
+ mmc1_pins: mmc1 {
+ renesas,groups = "mmc1_data8", "mmc1_ctrl";
+ renesas,function = "mmc1";
+ };
+};
+
+&mmcif1 {
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&fixedregulator3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index ee845fa..a179125 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -8,6 +8,10 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/clock/r8a7790-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,r8a7790";
interrupt-parent = <&gic>;
@@ -84,14 +88,14 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc40000 0 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 4 0x4>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -103,7 +107,7 @@
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc41000 0 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 5 0x4>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
@@ -115,7 +119,7 @@
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc42000 0 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 6 0x4>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -127,7 +131,7 @@
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc43000 0 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 7 0x4>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -139,7 +143,7 @@
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc44000 0 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 8 0x4>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -151,7 +155,7 @@
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xffc45000 0 0x2c>;
interrupt-parent = <&gic>;
- interrupts = <0 9 0x4>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
@@ -159,21 +163,31 @@
interrupt-controller;
};
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
irqc0: interrupt-controller@e61c0000 {
- compatible = "renesas,irqc";
+ compatible = "renesas,irqc-r8a7790", "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
- interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>;
};
i2c0: i2c@e6508000 {
@@ -182,7 +196,8 @@
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6508000 0 0x40>;
interrupt-parent = <&gic>;
- interrupts = <0 287 0x4>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_I2C0>;
status = "disabled";
};
@@ -192,7 +207,8 @@
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6518000 0 0x40>;
interrupt-parent = <&gic>;
- interrupts = <0 288 0x4>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_I2C1>;
status = "disabled";
};
@@ -202,7 +218,8 @@
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6530000 0 0x40>;
interrupt-parent = <&gic>;
- interrupts = <0 286 0x4>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_I2C2>;
status = "disabled";
};
@@ -212,24 +229,27 @@
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6540000 0 0x40>;
interrupt-parent = <&gic>;
- interrupts = <0 290 0x4>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_I2C3>;
status = "disabled";
};
mmcif0: mmcif@ee200000 {
- compatible = "renesas,sh-mmcif";
+ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupt-parent = <&gic>;
- interrupts = <0 169 0x4>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
reg-io-width = <4>;
status = "disabled";
};
- mmcif1: mmcif@ee220000 {
- compatible = "renesas,sh-mmcif";
+ mmcif1: mmc@ee220000 {
+ compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupt-parent = <&gic>;
- interrupts = <0 170 0x4>;
+ interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
reg-io-width = <4>;
status = "disabled";
};
@@ -239,39 +259,372 @@
reg = <0 0xe6060000 0 0x250>;
};
- sdhi0: sdhi@ee100000 {
+ sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 165 4>;
+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
cap-sd-highspeed;
status = "disabled";
};
- sdhi1: sdhi@ee120000 {
+ sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 166 4>;
+ interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
cap-sd-highspeed;
status = "disabled";
};
- sdhi2: sdhi@ee140000 {
+ sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 167 4>;
+ interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
cap-sd-highspeed;
status = "disabled";
};
- sdhi3: sdhi@ee160000 {
+ sdhi3: sd@ee160000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee160000 0 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 168 4>;
+ interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
cap-sd-highspeed;
status = "disabled";
};
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* External root clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7790-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll3",
+ "lb", "qspi", "sdh", "sd0", "sd1",
+ "z";
+ };
+
+ /* Variable factor clocks */
+ sd2_clk: sd2_clk@e6150078 {
+ compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150078 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd2";
+ };
+ sd3_clk: sd3_clk@e615007c {
+ compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615007c 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd3";
+ };
+ mmc0_clk: mmc0_clk@e6150240 {
+ compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150240 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc0";
+ };
+ mmc1_clk: mmc1_clk@e6150244 {
+ compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150244 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc1";
+ };
+ ssp_clk: ssp_clk@e6150248 {
+ compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150248 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "ssp";
+ };
+ ssprs_clk: ssprs_clk@e615024c {
+ compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615024c 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "ssprs";
+ };
+
+ /* Fixed factor clocks */
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ z2_clk: z2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "z2";
+ };
+ zg_clk: zg_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "zg";
+ };
+ zx_clk: zx_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "zx";
+ };
+ zs_clk: zs_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "zs";
+ };
+ hp_clk: hp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "hp";
+ };
+ i_clk: i_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "i";
+ };
+ b_clk: b_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "b";
+ };
+ p_clk: p_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "p";
+ };
+ cl_clk: cl_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <48>;
+ clock-mult = <1>;
+ clock-output-names = "cl";
+ };
+ m2_clk: m2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "m2";
+ };
+ imp_clk: imp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "imp";
+ };
+ rclk_clk: rclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(48 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "rclk";
+ };
+ oscclk_clk: oscclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(12 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "oscclk";
+ };
+ zb3_clk: zb3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "zb3";
+ };
+ zb3d2_clk: zb3d2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "zb3d2";
+ };
+ ddr_clk: ddr_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "ddr";
+ };
+ mp_clk: mp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-div = <15>;
+ clock-mult = <1>;
+ clock-output-names = "mp";
+ };
+ cp_clk: cp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "cp";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: mstp0_clks@e6150130 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+ clocks = <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7790_CLK_MSIOF0>;
+ clock-output-names = "msiof0";
+ };
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+ clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
+ <&zs_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
+ R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
+ R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY
+ >;
+ clock-output-names =
+ "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+ "vsp1-du0", "vsp1-rt", "vsp1-sy";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
+ R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
+ R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
+ >;
+ clock-output-names =
+ "scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
+ "scifb1", "msiof1", "msiof3", "scifb2";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
+ <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
+ <&mmc0_clk>, <&rclk_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+ R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
+ R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1
+ >;
+ clock-output-names =
+ "tpu0", "mmcif1", "sdhi3", "sdhi2",
+ "sdhi1", "sdhi0", "mmcif0", "cmt1";
+ };
+ mstp5_clks: mstp5_clks@e6150144 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+ clocks = <&extal_clk>, <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
+ clock-output-names = "thermal", "pwm";
+ };
+ mstp7_clks: mstp7_clks@e615014c {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+ <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
+ <&zx_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
+ R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
+ R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
+ R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0
+ >;
+ clock-output-names =
+ "ehci", "hsusb", "hscif1", "hscif0", "scif1",
+ "scif0", "du2", "du1", "du0", "lvds1", "lvds0";
+ };
+ mstp8_clks: mstp8_clks@e6150990 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+ clocks = <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7790_CLK_ETHER>;
+ clock-output-names = "ether";
+ };
+ mstp9_clks: mstp9_clks@e6150994 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+ clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD
+ R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1
+ R8A7790_CLK_I2C0
+ >;
+ clock-output-names =
+ "rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
new file mode 100644
index 0000000..588ca17
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
@@ -0,0 +1,115 @@
+/*
+ * Device Tree Source for the Koelsch board
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Koelsch";
+ compatible = "renesas,koelsch-reference", "renesas,r8a7791";
+
+ chosen {
+ bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ lbsc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-a {
+ gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ linux,code = <30>;
+ label = "SW30";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-b {
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <48>;
+ label = "SW31";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-c {
+ gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+ linux,code = <46>;
+ label = "SW32";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-d {
+ gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+ linux,code = <32>;
+ label = "SW33";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-e {
+ gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+ linux,code = <18>;
+ label = "SW34";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-f {
+ gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ linux,code = <33>;
+ label = "SW35";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-g {
+ gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+ linux,code = <34>;
+ label = "SW36";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led6 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ };
+ led7 {
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ };
+ led8 {
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pfc {
+ pinctrl-0 = <&scif0_pins &scif1_pins>;
+ pinctrl-names = "default";
+
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_d";
+ renesas,function = "scif0";
+ };
+
+ scif1_pins: serial1 {
+ renesas,groups = "scif1_data_d";
+ renesas,function = "scif1";
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 1ce5250..fd556c3 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -10,7 +10,8 @@
*/
/dts-v1/;
-/include/ "r8a7791.dtsi"
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Koelsch";
@@ -29,4 +30,36 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led6 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ };
+ led7 {
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ };
+ led8 {
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif0_pins &scif1_pins>;
+ pinctrl-names = "default";
+
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_d";
+ renesas,function = "scif0";
+ };
+
+ scif1_pins: serial1 {
+ renesas,groups = "scif1_data_d";
+ renesas,function = "scif1";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index fea5cfe..19c6550 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -9,6 +9,10 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/clock/r8a7791-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,r8a7791";
interrupt-parent = <&gic>;
@@ -43,32 +47,463 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
irqc0: interrupt-controller@e61c0000 {
- compatible = "renesas,irqc";
+ compatible = "renesas,irqc-r8a7791", "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
- interrupts = <0 0 4>,
- <0 1 4>,
- <0 2 4>,
- <0 3 4>,
- <0 12 4>,
- <0 13 4>,
- <0 14 4>,
- <0 15 4>,
- <0 16 4>,
- <0 17 4>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pfc: pfc@e6060000 {
+ compatible = "renesas,pfc-r8a7791";
+ reg = <0 0xe6060000 0 0x250>;
+ #gpio-range-cells = <3>;
+ };
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* External root clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7791-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll3",
+ "lb", "qspi", "sdh", "sd0", "z";
+ };
+
+ /* Variable factor clocks */
+ sd1_clk: sd2_clk@e6150078 {
+ compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150078 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd1";
+ };
+ sd2_clk: sd3_clk@e615007c {
+ compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615007c 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "sd2";
+ };
+ mmc0_clk: mmc0_clk@e6150240 {
+ compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150240 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "mmc0";
+ };
+ ssp_clk: ssp_clk@e6150248 {
+ compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe6150248 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "ssp";
+ };
+ ssprs_clk: ssprs_clk@e615024c {
+ compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+ reg = <0 0xe615024c 0 4>;
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-output-names = "ssprs";
+ };
+
+ /* Fixed factor clocks */
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ zg_clk: zg_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "zg";
+ };
+ zx_clk: zx_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "zx";
+ };
+ zs_clk: zs_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "zs";
+ };
+ hp_clk: hp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "hp";
+ };
+ i_clk: i_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "i";
+ };
+ b_clk: b_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "b";
+ };
+ p_clk: p_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "p";
+ };
+ cl_clk: cl_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <48>;
+ clock-mult = <1>;
+ clock-output-names = "cl";
+ };
+ m2_clk: m2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "m2";
+ };
+ imp_clk: imp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "imp";
+ };
+ rclk_clk: rclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(48 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "rclk";
+ };
+ oscclk_clk: oscclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(12 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "oscclk";
+ };
+ zb3_clk: zb3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "zb3";
+ };
+ zb3d2_clk: zb3d2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "zb3d2";
+ };
+ ddr_clk: ddr_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "ddr";
+ };
+ mp_clk: mp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-div = <15>;
+ clock-mult = <1>;
+ clock-output-names = "mp";
+ };
+ cp_clk: cp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "cp";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: mstp0_clks@e6150130 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+ clocks = <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7791_CLK_MSIOF0>;
+ clock-output-names = "msiof0";
+ };
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+ clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
+ R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
+ R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY
+ >;
+ clock-output-names =
+ "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+ "vsp1-du0", "vsp1-sy";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
+ R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
+ R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
+ >;
+ clock-output-names =
+ "scifa2", "scifa1", "scifa0", "misof2", "scifb0",
+ "scifb1", "msiof1", "scifb2";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>,
+ <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1
+ R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1
+ >;
+ clock-output-names =
+ "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1";
+ };
+ mstp5_clks: mstp5_clks@e6150144 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+ clocks = <&extal_clk>, <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
+ clock-output-names = "thermal", "pwm";
+ };
+ mstp7_clks: mstp7_clks@e615014c {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+ clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&zx_clk>, <&zx_clk>, <&zx_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
+ R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
+ R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
+ R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
+ R8A7791_CLK_LVDS0
+ >;
+ clock-output-names =
+ "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+ "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
+ };
+ mstp8_clks: mstp8_clks@e6150990 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+ clocks = <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7791_CLK_ETHER>;
+ clock-output-names = "ether";
+ };
+ mstp9_clks: mstp9_clks@e6150994 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+ clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD
+ R8A7791_CLK_I2C4 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3
+ R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
+ >;
+ clock-output-names =
+ "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3",
+ "i2c2", "i2c1", "i2c0";
+ };
+ mstp11_clks: mstp11_clks@e615099c {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
+ >;
+ clock-output-names = "scifa3", "scifa4", "scifa5";
+ };
};
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 5cdaba4..1105558 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1,6 +1,6 @@
/*
* sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
- * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
+ * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
*
* Copyright (C) 2013 Atmel,
* 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
@@ -13,6 +13,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/at91.h>
/ {
model = "Atmel SAMA5D3 family SoC";
@@ -36,6 +37,7 @@
i2c2 = &i2c2;
ssc0 = &ssc0;
ssc1 = &ssc1;
+ pwm0 = &pwm0;
};
cpus {
#address-cells = <1>;
@@ -56,6 +58,14 @@
reg = <0x20000000 0x8000000>;
};
+ clocks {
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -79,6 +89,8 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
};
spi0: spi@f0004000 {
@@ -92,6 +104,8 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -101,6 +115,8 @@
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -108,6 +124,8 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>;
+ clock-names = "t0_clk";
};
i2c0: i2c@f0014000 {
@@ -121,6 +139,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -135,6 +154,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi1_clk>;
status = "disabled";
};
@@ -144,6 +164,8 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -153,6 +175,17 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pwm0: pwm@f002c000 {
+ compatible = "atmel,sama5d3-pwm";
+ reg = <0xf002c000 0x300>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
status = "disabled";
};
@@ -174,6 +207,8 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
};
spi1: spi@f8008000 {
@@ -187,6 +222,8 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -196,6 +233,8 @@
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -219,6 +258,9 @@
&pinctrl_adc0_ad10
&pinctrl_adc0_ad11
>;
+ clocks = <&adc_clk>,
+ <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channel-base = <0x50>;
atmel,adc-channels-used = <0xfff>;
atmel,adc-drdy-mask = <0x1000000>;
@@ -272,8 +314,11 @@
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
<&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi2_clk>;
status = "disabled";
};
@@ -283,6 +328,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -292,25 +339,41 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
sha@f8034000 {
- compatible = "atmel,sam9g46-sha";
+ compatible = "atmel,at91sam9g46-sha";
reg = <0xf8034000 0x100>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
+ dma-names = "tx";
+ clocks = <&sha_clk>;
+ clock-names = "sha_clk";
};
aes@f8038000 {
- compatible = "atmel,sam9g46-aes";
+ compatible = "atmel,at91sam9g46-aes";
reg = <0xf8038000 0x100>;
- interrupts = <43 4 0>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
+ dma-names = "tx", "rx";
+ clocks = <&aes_clk>;
+ clock-names = "aes_clk";
};
tdes@f803c000 {
- compatible = "atmel,sam9g46-tdes";
+ compatible = "atmel,at91sam9g46-tdes";
reg = <0xf803c000 0x100>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
+ <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
+ dma-names = "tx", "rx";
+ clocks = <&tdes_clk>;
+ clock-names = "tdes_clk";
};
dma0: dma-controller@ffffe600 {
@@ -318,6 +381,8 @@
reg = <0xffffe600 0x200>;
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
};
dma1: dma-controller@ffffe800 {
@@ -325,6 +390,8 @@
reg = <0xffffe800 0x200>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
+ clocks = <&dma1_clk>;
+ clock-names = "dma_clk";
};
ramc0: ramc@ffffea00 {
@@ -338,6 +405,8 @@
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&dbgu_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -443,6 +512,14 @@
};
};
+ i2c2 {
+ pinctrl_i2c2: i2c2-0 {
+ atmel,pins =
+ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
+ AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
+ };
+ };
+
isi {
pinctrl_isi: isi-0 {
atmel,pins =
@@ -626,6 +703,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff400 {
@@ -636,6 +714,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff600 {
@@ -646,6 +725,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio@fffff800 {
@@ -656,6 +736,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
};
pioE: gpio@fffffa00 {
@@ -666,12 +747,334 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioE_clk>;
};
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,sama5d3-pmc";
reg = <0xfffffc00 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ clk32k: slck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MOSCS>;
+ clocks = <&clk32k>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,sama5d3-clk-pll";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <8000000 50000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91sam9x5-clk-master";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+ atmel,clk-output-range = <0 166000000>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9x5-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+ };
+
+ smd: smdclk {
+ compatible = "atmel,at91sam9x5-clk-smd";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddrck: ddrck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ smdck: smdck {
+ #clock-cells = <0>;
+ reg = <4>;
+ clocks = <&smd>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91sam9x5-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ dbgu_clk: dbgu_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ pioD_clk: pioD_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ pioE_clk: pioE_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <18>;
+ #clock-cells = <0>;
+ atmel,clk-output-range = <0 16625000>;
+ };
+
+ twi1_clk: twi1_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ atmel,clk-output-range = <0 16625000>;
+ };
+
+ twi2_clk: twi2_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ atmel,clk-output-range = <0 16625000>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ mci1_clk: mci1_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ atmel,clk-output-range = <0 133000000>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ atmel,clk-output-range = <0 133000000>;
+ };
+
+ tcb0_clk: tcb0_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ atmel,clk-output-range = <0 133000000>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <29>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ dma0_clk: dma0_clk {
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+
+ dma1_clk: dma1_clk {
+ #clock-cells = <0>;
+ reg = <31>;
+ };
+
+ uhphs_clk: uhphs_clk {
+ #clock-cells = <0>;
+ reg = <32>;
+ };
+
+ udphs_clk: udphs_clk {
+ #clock-cells = <0>;
+ reg = <33>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <37>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <38>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <39>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ sha_clk: sha_clk {
+ #clock-cells = <0>;
+ reg = <42>;
+ };
+
+ aes_clk: aes_clk {
+ #clock-cells = <0>;
+ reg = <43>;
+ };
+
+ tdes_clk: tdes_clk {
+ #clock-cells = <0>;
+ reg = <44>;
+ };
+
+ trng_clk: trng_clk {
+ #clock-cells = <0>;
+ reg = <45>;
+ };
+
+ fuse_clk: fuse_clk {
+ #clock-cells = <0>;
+ reg = <48>;
+ };
+ };
};
rstc@fffffe00 {
@@ -683,6 +1086,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&mck>;
};
watchdog@fffffe40 {
@@ -705,6 +1109,8 @@
reg = <0x00500000 0x100000
0xf8030000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
status = "disabled";
ep0 {
@@ -817,6 +1223,9 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+ <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -824,6 +1233,8 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/sama5d36.dtsi
new file mode 100644
index 0000000..6c31c26
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d36.dtsi
@@ -0,0 +1,20 @@
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+ compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
new file mode 100644
index 0000000..59576c6
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -0,0 +1,53 @@
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D36-EK";
+ compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index 8ed3260..a077585 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -32,12 +32,30 @@
};
+ pmc: pmc@fffffc00 {
+ periphck {
+ can0_clk: can0_clk {
+ #clock-cells = <0>;
+ reg = <40>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ can1_clk: can0_clk {
+ #clock-cells = <0>;
+ reg = <41>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+ };
+ };
+
can0: can@f000c000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ clocks = <&can0_clk>;
+ clock-names = "can_clk";
status = "disabled";
};
@@ -47,6 +65,8 @@
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ clocks = <&can1_clk>;
+ clock-names = "can_clk";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
index 4d4f351..fe2af92 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -31,12 +31,23 @@
};
};
+ pmc: pmc@fffffc00 {
+ periphck {
+ macb1_clk: macb1_clk {
+ #clock-cells = <0>;
+ reg = <35>;
+ };
+ };
+ };
+
macb1: ethernet@f802c000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
+ clocks = <&macb1_clk>, <&macb1_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
index 0ba8be3..a6cb050 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -64,12 +64,23 @@
};
};
+ pmc: pmc@fffffc00 {
+ periphck {
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <34>;
+ };
+ };
+ };
+
macb0: ethernet@f0028000 {
compatible = "cdns,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 01f52a7..85d3027 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -50,6 +50,23 @@
};
};
};
+
+ pmc: pmc@fffffc00 {
+ periphck {
+ lcdc_clk: lcdc_clk {
+ #clock-cells = <0>;
+ reg = <36>;
+ };
+ };
+
+ systemck {
+ lcdck: lcdck {
+ #clock-cells = <0>;
+ reg = <3>;
+ clocks = <&mck>;
+ };
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 38e88e3..b029fe7 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clk/at91.h>
/ {
ahb {
@@ -30,6 +31,15 @@
};
};
+ pmc: pmc@fffffc00 {
+ periphck {
+ mci2_clk: mci2_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+ };
+ };
+
mmc2: mmc@f8004000 {
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
@@ -38,6 +48,8 @@
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+ clocks = <&mci2_clk>;
+ clock-names = "mci_clk";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 5264bb4..382b044 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clk/at91.h>
/ {
aliases {
@@ -17,10 +18,21 @@
ahb {
apb {
+ pmc: pmc@fffffc00 {
+ periphck {
+ tcb1_clk: tcb1_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+ };
+ };
+
tcb1: timer@f8014000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8014000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb1_clk>;
+ clock-names = "t0_clk";
};
};
};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index 98fcb2d..a9fa75e 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -9,8 +9,14 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clk/at91.h>
/ {
+ aliases {
+ serial5 = &uart0;
+ serial6 = &uart1;
+ };
+
ahb {
apb {
pinctrl@fffff200 {
@@ -31,12 +37,30 @@
};
};
+ pmc: pmc@fffffc00 {
+ periphck {
+ uart0_clk: uart0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+
+ uart1_clk: uart1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ atmel,clk-output-range = <0 66000000>;
+ };
+ };
+ };
+
uart0: serial@f0024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf0024000 0x200>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -46,6 +70,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 726a0f3..f55ed07 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -18,17 +18,6 @@
reg = <0x20000000 0x20000000>;
};
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
- };
-
ahb {
apb {
spi0: spi@f0004000 {
@@ -38,6 +27,12 @@
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
+
+ pmc: pmc@fffffc00 {
+ main: mainck {
+ clock-frequency = <12000000>;
+ };
+ };
};
nand0: nand@60000000 {
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi
index 1c296d6..f9bdde5 100644
--- a/arch/arm/boot/dts/sama5d3xdm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xdm.dtsi
@@ -18,6 +18,7 @@
interrupts = <31 0x0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qt1070_irq>;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts
index 8acf51e..a759a27 100644
--- a/arch/arm/boot/dts/sh7372-mackerel.dts
+++ b/arch/arm/boot/dts/sh7372-mackerel.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "sh7372.dtsi"
+#include "sh7372.dtsi"
/ {
model = "Mackerel (AP4 EVM 2nd)";
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 8ee06dd..eb8886b 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -12,8 +12,9 @@
*/
/dts-v1/;
-/include/ "sh73a0.dtsi"
+#include "sh73a0.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "KZM-A9-GT";
@@ -82,7 +83,7 @@
reg = <0x10000000 0x100>;
phy-mode = "mii";
interrupt-parent = <&irqpin0>;
- interrupts = <3 0>; /* active low */
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
reg-io-width = <4>;
smsc,irq-push-pull;
smsc,save-mac-address;
@@ -105,6 +106,66 @@
gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
};
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ back-key {
+ gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+ linux,code = <158>;
+ label = "SW3";
+ };
+
+ right-key {
+ gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+ linux,code = <106>;
+ label = "SW2-R";
+ };
+
+ left-key {
+ gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+ linux,code = <105>;
+ label = "SW2-L";
+ };
+
+ enter-key {
+ gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+ linux,code = <28>;
+ label = "SW2-P";
+ };
+
+ up-key {
+ gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+ linux,code = <103>;
+ label = "SW2-U";
+ };
+
+ down-key {
+ gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+ linux,code = <108>;
+ label = "SW2-D";
+ };
+
+ home-key {
+ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+ linux,code = <102>;
+ label = "SW1";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&ak4648>;
+ bitclock-master;
+ frame-master;
+ system-clock-frequency = <11289600>;
+ };
+ };
};
&i2c0 {
@@ -179,12 +240,29 @@
};
};
};
+
+ ak4648: ak4648@0x12 {
+ #sound-dai-cells = <0>;
+ compatible = "asahi-kasei,ak4648";
+ reg = <0x12>;
+ };
};
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
status = "okay";
+
+ pcf8575: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ interrupt-parent = <&irqpin2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
&mmcif {
@@ -205,7 +283,7 @@
renesas,function = "i2c3";
};
- mmcif_pins: mmcif {
+ mmcif_pins: mmc {
mux {
renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
renesas,function = "mmc0";
@@ -217,20 +295,26 @@
};
};
- scifa4_pins: scifa4 {
+ scifa4_pins: serial4 {
renesas,groups = "scifa4_data", "scifa4_ctrl";
renesas,function = "scifa4";
};
- sdhi0_pins: sdhi0 {
+ sdhi0_pins: sd0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
renesas,function = "sdhi0";
};
- sdhi2_pins: sdhi2 {
+ sdhi2_pins: sd2 {
renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
renesas,function = "sdhi2";
};
+
+ fsia_pins: sounda {
+ renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+ "fsia_data_in", "fsia_data_out";
+ renesas,function = "fsia";
+ };
};
&sdhi0 {
@@ -251,3 +335,10 @@
broken-cd;
status = "okay";
};
+
+&sh_fsi2 {
+ pinctrl-0 = <&fsia_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 0f1ca77..27c5f42 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -9,7 +9,7 @@
*/
/dts-v1/;
-/include/ "sh73a0.dtsi"
+#include "sh73a0.dtsi"
/ {
model = "KZM-A9-GT";
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index fcf2688..b7bd3b9 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -10,6 +10,8 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
compatible = "renesas,sh73a0";
@@ -40,12 +42,12 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 55 4>,
- <0 56 4>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
+ <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
irqpin0: irqpin@e6900000 {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900000 4>,
@@ -54,18 +56,18 @@
<0xe6900040 1>,
<0xe6900060 1>;
interrupt-parent = <&gic>;
- interrupts = <0 1 0x4
- 0 2 0x4
- 0 3 0x4
- 0 4 0x4
- 0 5 0x4
- 0 6 0x4
- 0 7 0x4
- 0 8 0x4>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
+ 0 2 IRQ_TYPE_LEVEL_HIGH
+ 0 3 IRQ_TYPE_LEVEL_HIGH
+ 0 4 IRQ_TYPE_LEVEL_HIGH
+ 0 5 IRQ_TYPE_LEVEL_HIGH
+ 0 6 IRQ_TYPE_LEVEL_HIGH
+ 0 7 IRQ_TYPE_LEVEL_HIGH
+ 0 8 IRQ_TYPE_LEVEL_HIGH>;
};
irqpin1: irqpin@e6900004 {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900004 4>,
@@ -74,19 +76,19 @@
<0xe6900044 1>,
<0xe6900064 1>;
interrupt-parent = <&gic>;
- interrupts = <0 9 0x4
- 0 10 0x4
- 0 11 0x4
- 0 12 0x4
- 0 13 0x4
- 0 14 0x4
- 0 15 0x4
- 0 16 0x4>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
+ 0 10 IRQ_TYPE_LEVEL_HIGH
+ 0 11 IRQ_TYPE_LEVEL_HIGH
+ 0 12 IRQ_TYPE_LEVEL_HIGH
+ 0 13 IRQ_TYPE_LEVEL_HIGH
+ 0 14 IRQ_TYPE_LEVEL_HIGH
+ 0 15 IRQ_TYPE_LEVEL_HIGH
+ 0 16 IRQ_TYPE_LEVEL_HIGH>;
control-parent;
};
irqpin2: irqpin@e6900008 {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900008 4>,
@@ -95,18 +97,18 @@
<0xe6900048 1>,
<0xe6900068 1>;
interrupt-parent = <&gic>;
- interrupts = <0 17 0x4
- 0 18 0x4
- 0 19 0x4
- 0 20 0x4
- 0 21 0x4
- 0 22 0x4
- 0 23 0x4
- 0 24 0x4>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
+ 0 18 IRQ_TYPE_LEVEL_HIGH
+ 0 19 IRQ_TYPE_LEVEL_HIGH
+ 0 20 IRQ_TYPE_LEVEL_HIGH
+ 0 21 IRQ_TYPE_LEVEL_HIGH
+ 0 22 IRQ_TYPE_LEVEL_HIGH
+ 0 23 IRQ_TYPE_LEVEL_HIGH
+ 0 24 IRQ_TYPE_LEVEL_HIGH>;
};
irqpin3: irqpin@e690000c {
- compatible = "renesas,intc-irqpin";
+ compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe690000c 4>,
@@ -115,14 +117,14 @@
<0xe690004c 1>,
<0xe690006c 1>;
interrupt-parent = <&gic>;
- interrupts = <0 25 0x4
- 0 26 0x4
- 0 27 0x4
- 0 28 0x4
- 0 29 0x4
- 0 30 0x4
- 0 31 0x4
- 0 32 0x4>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
+ 0 26 IRQ_TYPE_LEVEL_HIGH
+ 0 27 IRQ_TYPE_LEVEL_HIGH
+ 0 28 IRQ_TYPE_LEVEL_HIGH
+ 0 29 IRQ_TYPE_LEVEL_HIGH
+ 0 30 IRQ_TYPE_LEVEL_HIGH
+ 0 31 IRQ_TYPE_LEVEL_HIGH
+ 0 32 IRQ_TYPE_LEVEL_HIGH>;
};
i2c0: i2c@e6820000 {
@@ -131,10 +133,10 @@
compatible = "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
interrupt-parent = <&gic>;
- interrupts = <0 167 0x4
- 0 168 0x4
- 0 169 0x4
- 0 170 0x4>;
+ interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
+ 0 168 IRQ_TYPE_LEVEL_HIGH
+ 0 169 IRQ_TYPE_LEVEL_HIGH
+ 0 170 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -144,10 +146,10 @@
compatible = "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
interrupt-parent = <&gic>;
- interrupts = <0 51 0x4
- 0 52 0x4
- 0 53 0x4
- 0 54 0x4>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
+ 0 52 IRQ_TYPE_LEVEL_HIGH
+ 0 53 IRQ_TYPE_LEVEL_HIGH
+ 0 54 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -157,10 +159,10 @@
compatible = "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
interrupt-parent = <&gic>;
- interrupts = <0 171 0x4
- 0 172 0x4
- 0 173 0x4
- 0 174 0x4>;
+ interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
+ 0 172 IRQ_TYPE_LEVEL_HIGH
+ 0 173 IRQ_TYPE_LEVEL_HIGH
+ 0 174 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -170,10 +172,10 @@
compatible = "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
interrupt-parent = <&gic>;
- interrupts = <0 183 0x4
- 0 184 0x4
- 0 185 0x4
- 0 186 0x4>;
+ interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
+ 0 184 IRQ_TYPE_LEVEL_HIGH
+ 0 185 IRQ_TYPE_LEVEL_HIGH
+ 0 186 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -183,52 +185,52 @@
compatible = "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
interrupt-parent = <&gic>;
- interrupts = <0 187 0x4
- 0 188 0x4
- 0 189 0x4
- 0 190 0x4>;
+ interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
+ 0 188 IRQ_TYPE_LEVEL_HIGH
+ 0 189 IRQ_TYPE_LEVEL_HIGH
+ 0 190 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- mmcif: mmcif@e6bd0000 {
+ mmcif: mmc@e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 140 0x4
- 0 141 0x4>;
+ interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
+ 0 141 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <4>;
status = "disabled";
};
- sdhi0: sdhi@ee100000 {
- compatible = "renesas,sdhi-r8a7740";
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 83 4
- 0 84 4
- 0 85 4>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
+ 0 84 IRQ_TYPE_LEVEL_HIGH
+ 0 85 IRQ_TYPE_LEVEL_HIGH>;
cap-sd-highspeed;
status = "disabled";
};
/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
- sdhi1: sdhi@ee120000 {
- compatible = "renesas,sdhi-r8a7740";
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-sh73a0";
reg = <0xee120000 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 88 4
- 0 89 4>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
+ 0 89 IRQ_TYPE_LEVEL_HIGH>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
};
- sdhi2: sdhi@ee140000 {
- compatible = "renesas,sdhi-r8a7740";
+ sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-sh73a0";
reg = <0xee140000 0x100>;
interrupt-parent = <&gic>;
- interrupts = <0 104 4
- 0 105 4>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
+ 0 105 IRQ_TYPE_LEVEL_HIGH>;
toshiba,mmc-wrprotect-disable;
cap-sd-highspeed;
status = "disabled";
@@ -240,5 +242,23 @@
<0xe605801c 0x1c>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts-extended =
+ <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+ <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+ <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+ <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+ <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+ <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+ <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+ };
+
+ sh_fsi2: sound@ec230000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,sh_fsi2";
+ reg = <0xec230000 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 146 0x4>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/st-pincfg.h b/arch/arm/boot/dts/st-pincfg.h
index 8c45d85..4851c38 100644
--- a/arch/arm/boot/dts/st-pincfg.h
+++ b/arch/arm/boot/dts/st-pincfg.h
@@ -15,7 +15,7 @@
/* Pull Up */
#define PU (1 << 26)
/* Open Drain */
-#define OD (1 << 26)
+#define OD (1 << 25)
#define RT (1 << 23)
#define INVERTCLK (1 << 22)
#define CLKNOTDATA (1 << 21)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 7da99fe..e0853ea 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -913,6 +913,10 @@
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
+ dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
+ <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
+ dma-names = "rx", "tx";
+
clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
clock-names = "msp", "apb_pclk";
@@ -925,6 +929,9 @@
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
+ dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
+ dma-names = "tx";
+
clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
clock-names = "msp", "apb_pclk";
@@ -938,6 +945,11 @@
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
+ dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */
+ <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
+ HighPrio - Fixed */
+ dma-names = "rx", "tx";
+
clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
clock-names = "msp", "apb_pclk";
@@ -950,6 +962,9 @@
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
+ dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
+ dma-names = "rx";
+
clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
clock-names = "msp", "apb_pclk";
@@ -987,6 +1002,23 @@
status = "disabled";
};
+ mcde@a0350000 {
+ compatible = "stericsson,mcde";
+ reg = <0xa0350000 0x1000>, /* MCDE */
+ <0xa0351000 0x1000>, /* DSI link 1 */
+ <0xa0352000 0x1000>, /* DSI link 2 */
+ <0xa0353000 0x1000>; /* DSI link 3 */
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
+ <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
+ <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
+ <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */
+ <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */
+ <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */
+ <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */
+ <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */
+ };
+
cryp@a03cb000 {
compatible = "stericsson,ux500-cryp";
reg = <0xa03cb000 0x1000>;
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
new file mode 100644
index 0000000..addfcc7
--- /dev/null
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -0,0 +1,745 @@
+/*
+ * Copyright 2013 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "ste-nomadik-pinctrl.dtsi"
+
+/ {
+ soc {
+ pinctrl {
+ /* Settings for all UART default and sleep states */
+ uart0 {
+ uart0_default_mode: uart0_default {
+ default_mux {
+ ste,function = "u0";
+ ste,pins = "u0_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+ ste,config = <&in_pu>;
+ };
+
+ default_cfg2 {
+ ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart0_sleep_mode: uart0_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+
+ sleep_cfg2 {
+ ste,pins = "GPIO1_AJ3"; /* RTS */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+
+ sleep_cfg3 {
+ ste,pins = "GPIO3_AH3"; /* TXD */
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+ };
+
+ uart1 {
+ uart1_default_mode: uart1_default {
+ default_mux {
+ ste,function = "u1";
+ ste,pins = "u1rxtx_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO4_AH6"; /* RXD */
+ ste,config = <&in_pu>;
+ };
+
+ default_cfg2 {
+ ste,pins = "GPIO5_AG6"; /* TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart1_sleep_mode: uart1_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO4_AH6"; /* RXD */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+
+ sleep_cfg2 {
+ ste,pins = "GPIO5_AG6"; /* TXD */
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+ };
+
+ uart2 {
+ uart2_default_mode: uart2_default {
+ default_mux {
+ ste,function = "u2";
+ ste,pins = "u2rxtx_c_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO29_W2"; /* RXD */
+ ste,config = <&in_pu>;
+ };
+
+ default_cfg2 {
+ ste,pins = "GPIO30_W3"; /* TXD */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart2_sleep_mode: uart2_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO29_W2"; /* RXD */
+ ste,config = <&in_wkup_pdis>;
+ };
+
+ sleep_cfg2 {
+ ste,pins = "GPIO30_W3"; /* TXD */
+ ste,config = <&out_wkup_pdis>;
+ };
+ };
+ };
+
+ /* Settings for all I2C default and sleep states */
+ i2c0 {
+ i2c0_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c0";
+ ste,pins = "i2c0_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c0_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c1 {
+ i2c1_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c1";
+ ste,pins = "i2c1_b_2";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c1_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c2 {
+ i2c2_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c2";
+ ste,pins = "i2c2_b_2";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c2_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ i2c3 {
+ i2c3_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c3";
+ ste,pins = "i2c3_c_2";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c3_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /*
+ * Activating I2C4 will conflict with UART1 about the same pins so do not
+ * enable I2C4 and UART1 at the same time.
+ */
+ i2c4 {
+ i2c4_default_mode: i2c_default {
+ default_mux {
+ ste,function = "i2c4";
+ ste,pins = "i2c4_b_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c4_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /* Settings for all SPI default and sleep states */
+ spi2 {
+ spi2_default_mode: spi_default {
+ default_mux {
+ ste,function = "spi2";
+ ste,pins = "spi2_oc1_2";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO216_AG12"; /* FRM */
+ ste,config = <&gpio_out_hi>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO218_AH11"; /* RXD */
+ ste,config = <&in_pd>;
+ };
+ default_cfg3 {
+ ste,pins =
+ "GPIO215_AH13", /* TXD */
+ "GPIO217_AH12"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ };
+
+ spi2_idle_mode: spi_idle {
+ /*
+ * The idle mode is basically sleep mode sans wakeups. Also
+ * note that we have muxes the pins off the function here
+ * as we do not state any muxing.
+ */
+ idle_cfg1 {
+ ste,pins = "GPIO218_AH11"; /* RXD */
+ ste,config = <&slpm_in_pdis>;
+ };
+ idle_cfg2 {
+ ste,pins = "GPIO215_AH13"; /* TXD */
+ ste,config = <&slpm_out_lo_pdis>;
+ };
+ idle_cfg3 {
+ ste,pins = "GPIO217_AH12"; /* CLK */
+ ste,config = <&slpm_pdis>;
+ };
+ };
+
+ spi2_sleep_mode: spi_sleep {
+ sleep_cfg1 {
+ ste,pins =
+ "GPIO216_AG12", /* FRM */
+ "GPIO218_AH11"; /* RXD */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ ste,pins = "GPIO215_AH13"; /* TXD */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ ste,pins = "GPIO217_AH12"; /* CLK */
+ ste,config = <&slpm_wkup_pdis>;
+ };
+ };
+ };
+
+ /* Settings for all MMC/SD/SDIO default and sleep states */
+ sdi0 {
+ /* This is the external SD card slot, 4 bits wide */
+ sdi0_default_mode: sdi0_default {
+ default_mux {
+ ste,function = "mc0";
+ ste,pins = "mc0_a_1";
+ };
+ default_cfg1 {
+ ste,pins =
+ "GPIO18_AC2", /* CMDDIR */
+ "GPIO19_AC1", /* DAT0DIR */
+ "GPIO20_AB4"; /* DAT2DIR */
+ ste,config = <&out_hi>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO22_AA3"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ ste,pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg4 {
+ ste,pins =
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi0_sleep_mode: sdi0_sleep {
+ sleep_cfg1 {
+ ste,pins =
+ "GPIO18_AC2", /* CMDDIR */
+ "GPIO19_AC1", /* DAT0DIR */
+ "GPIO20_AB4"; /* DAT2DIR */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ ste,pins =
+ "GPIO22_AA3", /* FBCLK */
+ "GPIO24_AB2", /* CMD */
+ "GPIO25_Y4", /* DAT0 */
+ "GPIO26_Y2", /* DAT1 */
+ "GPIO27_AA2", /* DAT2 */
+ "GPIO28_AA1"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ ste,pins = "GPIO23_AA4"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi1 {
+ /* This is the WLAN SDIO 4 bits wide */
+ sdi1_default_mode: sdi1_default {
+ default_mux {
+ ste,function = "mc1";
+ ste,pins = "mc1_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO209_AG15"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ ste,pins =
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi1_sleep_mode: sdi1_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO208_AH16"; /* CLK */
+ ste,config = <&slpm_out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ ste,pins =
+ "GPIO209_AG15", /* FBCLK */
+ "GPIO210_AJ15", /* CMD */
+ "GPIO211_AG14", /* DAT0 */
+ "GPIO212_AF13", /* DAT1 */
+ "GPIO213_AG13", /* DAT2 */
+ "GPIO214_AH15"; /* DAT3 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi2 {
+ /* This is the eMMC 8 bits wide, usually PoP eMMC */
+ sdi2_default_mode: sdi2_default {
+ default_mux {
+ ste,function = "mc2";
+ ste,pins = "mc2_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO128_A5"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO130_C8"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ ste,pins =
+ "GPIO129_B4", /* CMD */
+ "GPIO131_A12", /* DAT0 */
+ "GPIO132_C10", /* DAT1 */
+ "GPIO133_B10", /* DAT2 */
+ "GPIO134_B9", /* DAT3 */
+ "GPIO135_A9", /* DAT4 */
+ "GPIO136_C7", /* DAT5 */
+ "GPIO137_A7", /* DAT6 */
+ "GPIO138_C5"; /* DAT7 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi2_sleep_mode: sdi2_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO128_A5"; /* CLK */
+ ste,config = <&out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ ste,pins =
+ "GPIO130_C8", /* FBCLK */
+ "GPIO129_B4"; /* CMD */
+ ste,config = <&in_wkup_pdis_en>;
+ };
+ sleep_cfg3 {
+ ste,pins =
+ "GPIO131_A12", /* DAT0 */
+ "GPIO132_C10", /* DAT1 */
+ "GPIO133_B10", /* DAT2 */
+ "GPIO134_B9", /* DAT3 */
+ "GPIO135_A9", /* DAT4 */
+ "GPIO136_C7", /* DAT5 */
+ "GPIO137_A7", /* DAT6 */
+ "GPIO138_C5"; /* DAT7 */
+ ste,config = <&in_wkup_pdis>;
+ };
+ };
+ };
+
+ sdi4 {
+ /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+ sdi4_default_mode: sdi4_default {
+ default_mux {
+ ste,function = "mc4";
+ ste,pins = "mc4_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO203_AE23"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO202_AF25"; /* FBCLK */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg3 {
+ ste,pins =
+ "GPIO201_AF24", /* CMD */
+ "GPIO200_AH26", /* DAT0 */
+ "GPIO199_AH23", /* DAT1 */
+ "GPIO198_AG25", /* DAT2 */
+ "GPIO197_AH24", /* DAT3 */
+ "GPIO207_AJ23", /* DAT4 */
+ "GPIO206_AG24", /* DAT5 */
+ "GPIO205_AG23", /* DAT6 */
+ "GPIO204_AF23"; /* DAT7 */
+ ste,config = <&in_pu>;
+ };
+ };
+
+ sdi4_sleep_mode: sdi4_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO203_AE23"; /* CLK */
+ ste,config = <&out_lo_wkup_pdis>;
+ };
+ sleep_cfg2 {
+ ste,pins =
+ "GPIO202_AF25", /* FBCLK */
+ "GPIO201_AF24", /* CMD */
+ "GPIO200_AH26", /* DAT0 */
+ "GPIO199_AH23", /* DAT1 */
+ "GPIO198_AG25", /* DAT2 */
+ "GPIO197_AH24", /* DAT3 */
+ "GPIO207_AJ23", /* DAT4 */
+ "GPIO206_AG24", /* DAT5 */
+ "GPIO205_AG23", /* DAT6 */
+ "GPIO204_AF23"; /* DAT7 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ /*
+ * Multi-rate serial ports (MSPs) - MSP3 output is internal and
+ * cannot be muxed onto any pins.
+ */
+ msp0 {
+ msp0_default_mode: msp0_default {
+ default_msp0_mux {
+ ste,function = "msp0";
+ ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1";
+ };
+ default_msp0_cfg {
+ ste,pins =
+ "GPIO12_AC4", /* TXD */
+ "GPIO15_AC3", /* RXD */
+ "GPIO13_AF3", /* TFS */
+ "GPIO14_AE3"; /* TCK */
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+
+ msp1 {
+ msp1_default_mode: msp1_default {
+ default_mux {
+ ste,function = "msp1";
+ ste,pins = "msp1txrx_a_1", "msp1_a_1";
+ };
+ default_cfg1 {
+ ste,pins = "GPIO33_AF2";
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ ste,pins =
+ "GPIO34_AE1",
+ "GPIO35_AE2",
+ "GPIO36_AG2";
+ ste,config = <&in_nopull>;
+ };
+
+ };
+ };
+
+ msp2 {
+ msp2_default_mode: msp2_default {
+ /* MSP2 usually used for HDMI audio */
+ default_mux {
+ ste,function = "msp2";
+ ste,pins = "msp2_a_1";
+ };
+ default_cfg1 {
+ ste,pins =
+ "GPIO193_AH27", /* TXD */
+ "GPIO194_AF27", /* TCK */
+ "GPIO195_AG28"; /* TFS */
+ ste,config = <&in_pd>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO196_AG26"; /* RXD */
+ ste,config = <&out_lo>;
+ };
+ };
+ };
+
+
+ musb {
+ musb_default_mode: musb_default {
+ default_mux {
+ ste,function = "usb";
+ ste,pins = "usb_a_1";
+ };
+ default_cfg1 {
+ ste,pins =
+ "GPIO256_AF28", /* NXT */
+ "GPIO258_AD29", /* XCLK */
+ "GPIO259_AC29", /* DIR */
+ "GPIO260_AD28", /* DAT7 */
+ "GPIO261_AD26", /* DAT6 */
+ "GPIO262_AE26", /* DAT5 */
+ "GPIO263_AG29", /* DAT4 */
+ "GPIO264_AE27", /* DAT3 */
+ "GPIO265_AD27", /* DAT2 */
+ "GPIO266_AC28", /* DAT1 */
+ "GPIO267_AC27"; /* DAT0 */
+ ste,config = <&in_nopull>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO257_AE29"; /* STP */
+ ste,config = <&out_hi>;
+ };
+ };
+
+ musb_sleep_mode: musb_sleep {
+ sleep_cfg1 {
+ ste,pins =
+ "GPIO256_AF28", /* NXT */
+ "GPIO258_AD29", /* XCLK */
+ "GPIO259_AC29"; /* DIR */
+ ste,config = <&slpm_wkup_pdis_en>;
+ };
+ sleep_cfg2 {
+ ste,pins = "GPIO257_AE29"; /* STP */
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ sleep_cfg3 {
+ ste,pins =
+ "GPIO260_AD28", /* DAT7 */
+ "GPIO261_AD26", /* DAT6 */
+ "GPIO262_AE26", /* DAT5 */
+ "GPIO263_AG29", /* DAT4 */
+ "GPIO264_AE27", /* DAT3 */
+ "GPIO265_AD27", /* DAT2 */
+ "GPIO266_AC28", /* DAT1 */
+ "GPIO267_AC27"; /* DAT0 */
+ ste,config = <&slpm_in_wkup_pdis_en>;
+ };
+ };
+ };
+
+ mcde {
+ lcd_default_mode: lcd_default {
+ default_mux {
+ /* Mux in VSI0 and all the data lines */
+ ste,function = "lcd";
+ ste,pins =
+ "lcdvsi0_a_1", /* VSI0 for LCD */
+ "lcd_d0_d7_a_1", /* Data lines */
+ "lcd_d8_d11_a_1", /* TV-out */
+ "lcdaclk_b_1", /* Clock line for TV-out */
+ "lcdvsi1_a_1"; /* VSI1 for HDMI */
+ };
+ default_cfg1 {
+ ste,pins =
+ "GPIO68_E1", /* VSI0 */
+ "GPIO69_E2"; /* VSI1 */
+ ste,config = <&in_pu>;
+ };
+ };
+ lcd_sleep_mode: lcd_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO69_E2"; /* VSI1 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
+
+ ske {
+ /* SKE keys on position 2 in an 8x8 matrix */
+ ske_kpa2_default_mode: ske_kpa2_default {
+ default_mux {
+ ste,function = "kp";
+ ste,pins = "kp_a_2";
+ };
+ default_cfg1 {
+ ste,pins =
+ "GPIO153_B17", /* I7 */
+ "GPIO154_C16", /* I6 */
+ "GPIO155_C19", /* I5 */
+ "GPIO156_C17", /* I4 */
+ "GPIO161_D21", /* I3 */
+ "GPIO162_D20", /* I2 */
+ "GPIO163_C20", /* I1 */
+ "GPIO164_B21"; /* I0 */
+ ste,config = <&in_pd>;
+ };
+ default_cfg2 {
+ ste,pins =
+ "GPIO157_A18", /* O7 */
+ "GPIO158_C18", /* O6 */
+ "GPIO159_B19", /* O5 */
+ "GPIO160_B20", /* O4 */
+ "GPIO165_C21", /* O3 */
+ "GPIO166_A22", /* O2 */
+ "GPIO167_B24", /* O1 */
+ "GPIO168_C22"; /* O0 */
+ ste,config = <&out_lo>;
+ };
+ };
+ ske_kpa2_sleep_mode: ske_kpa2_sleep {
+ sleep_cfg1 {
+ ste,pins =
+ "GPIO153_B17", /* I7 */
+ "GPIO154_C16", /* I6 */
+ "GPIO155_C19", /* I5 */
+ "GPIO156_C17", /* I4 */
+ "GPIO161_D21", /* I3 */
+ "GPIO162_D20", /* I2 */
+ "GPIO163_C20", /* I1 */
+ "GPIO164_B21"; /* I0 */
+ ste,config = <&slpm_in_pu_wkup_pdis_en>;
+ };
+ sleep_cfg2 {
+ ste,pins =
+ "GPIO157_A18", /* O7 */
+ "GPIO158_C18", /* O6 */
+ "GPIO159_B19", /* O5 */
+ "GPIO160_B20", /* O4 */
+ "GPIO165_C21", /* O3 */
+ "GPIO166_A22", /* O2 */
+ "GPIO167_B24", /* O1 */
+ "GPIO168_C22"; /* O0 */
+ ste,config = <&slpm_out_lo_pdis>;
+ };
+ };
+ /*
+ * SKE keys on position 1 and "other C1" combi giving
+ * six rows of six keys.
+ */
+ ske_kpaoc1_default_mode: ske_kpaoc1_default {
+ default_mux {
+ ste,function = "kp";
+ ste,pins = "kp_a_1", "kp_oc1_1";
+ };
+ default_cfg1 {
+ ste,pins =
+ "GPIO91_B6", /* KP_O0 */
+ "GPIO90_A3", /* KP_O1 */
+ "GPIO87_B3", /* KP_O2 */
+ "GPIO86_C6", /* KP_O3 */
+ "GPIO96_D8", /* KP_O6 */
+ "GPIO94_D7"; /* KP_O7 */
+ ste,config = <&out_lo>;
+ };
+ default_cfg2 {
+ ste,pins =
+ "GPIO93_B7", /* KP_I0 */
+ "GPIO92_D6", /* KP_I1 */
+ "GPIO89_E6", /* KP_I2 */
+ "GPIO88_C4", /* KP_I3 */
+ "GPIO97_D9", /* KP_I6 */
+ "GPIO95_E8"; /* KP_I7 */
+ ste,config = <&in_pu>;
+ };
+ };
+ };
+
+ wlan {
+ wlan_default_mode: wlan_default {
+ /*
+ * Activate this mode with the WLAN chip.
+ * These are plain GPIO pins used by WLAN
+ */
+ default_cfg1 {
+ ste,pins =
+ "GPIO226_AF8", /* WLAN_PMU_EN */
+ "GPIO85_D5"; /* WLAN_ENA */
+ ste,config = <&gpio_out_lo>;
+ };
+ default_cfg2 {
+ ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 76704ec..1c35744 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -12,6 +12,28 @@
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
+
+ button@139 {
+ /* Proximity sensor */
+ gpios = <&gpio6 25 0x4>;
+ linux,code = <11>; /* SW_FRONT_PROXIMITY */
+ label = "SFH7741 Proximity Sensor";
+ };
+ button@145 {
+ /* Hall sensor */
+ gpios = <&gpio4 17 0x4>;
+ linux,code = <0>; /* SW_LID */
+ label = "HED54XXU11 Hall Effect Sensor";
+ };
+ };
+
soc {
i2c@80004000 {
stmpe1601: stmpe1601@40 {
@@ -74,5 +96,24 @@
rohm,flip-y;
};
};
+
+ pinctrl {
+ prox {
+ prox_stuib_mode: prox_stuib {
+ stuib_cfg {
+ ste,pins = "GPIO217_AH12";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ hall {
+ hall_stuib_mode: stuib_tvk {
+ stuib_cfg {
+ ste,pins = "GPIO145_C13";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 76d3ef1..c405653 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -14,27 +14,105 @@
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
+
+ button@139 {
+ /* Proximity sensor */
+ gpios = <&gpio6 25 0x4>;
+ linux,code = <11>; /* SW_FRONT_PROXIMITY */
+ label = "SFH7741 Proximity Sensor";
+ };
+ button@145 {
+ /* Hall sensor */
+ gpios = <&gpio4 17 0x4>;
+ linux,code = <0>; /* SW_LID */
+ label = "HED54XXU11 Hall Effect Sensor";
+ };
+ };
+
soc {
- /* Add Synaptics touch screen, TC35892 keypad etc here */
+ /* Add Synaptics touch screen, TC35893 keypad etc here */
i2c@80004000 {
- tc3589x@44 {
- compatible = "tc3589x";
+ tc35893@44 {
+ compatible = "toshiba,tc35893";
reg = <0x44>;
interrupt-parent = <&gpio6>;
interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tc35893_tvk_mode>;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
tc3589x_gpio {
- compatible = "tc3589x-gpio";
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ compatible = "toshiba,tc3589x-gpio";
+ interrupts = <0>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
+ tc3589x_keypad {
+ compatible = "toshiba,tc3589x-keypad";
+ interrupts = <6>;
+ debounce-delay-ms = <4>;
+ keypad,num-columns = <8>;
+ keypad,num-rows = <8>;
+ linux,no-autorepeat;
+ linux,wakeup;
+ linux,keymap = <0x0301006b
+ 0x04010066
+ 0x06040072
+ 0x040200d7
+ 0x0303006a
+ 0x0205000e
+ 0x0607008b
+ 0x0500001c
+ 0x0403000b
+ 0x03040034
+ 0x05020067
+ 0x0305006c
+ 0x040500e7
+ 0x0005009e
+ 0x06020073
+ 0x01030039
+ 0x07060069
+ 0x050500d9>;
+ };
+ };
+ };
+ pinctrl {
+ /* Pull up this GPIO pin */
+ tc35893 {
+ tc35893_tvk_mode: tc35893_tvk {
+ tvk_cfg {
+ ste,pins = "GPIO218_AH11";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ prox {
+ prox_tvk_mode: prox_tvk {
+ tvk_cfg {
+ ste,pins = "GPIO217_AH12";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ hall {
+ hall_tvk_mode: hall_tvk {
+ tvk_cfg {
+ ste,pins = "GPIO145_C13";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index aa3f020..0c1e8d8 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -11,37 +11,57 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include "ste-dbx5x0.dtsi"
+#include "ste-href-family-pinctrl.dtsi"
/ {
memory {
reg = <0x00000000 0x20000000>;
};
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- button@1 {
- linux,code = <11>;
- label = "SFH7741 Proximity Sensor";
- };
- };
-
soc {
+ usb_per5@a03e0000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&musb_default_mode>;
+ pinctrl-1 = <&musb_sleep_mode>;
+ };
+
uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart0_default_mode>;
+ pinctrl-1 = <&uart0_sleep_mode>;
status = "okay";
};
uart@80121000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart1_default_mode>;
+ pinctrl-1 = <&uart1_sleep_mode>;
status = "okay";
};
uart@80007000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart2_default_mode>;
+ pinctrl-1 = <&uart2_sleep_mode>;
status = "okay";
};
+ i2c@80004000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c0_default_mode>;
+ pinctrl-1 = <&i2c0_sleep_mode>;
+ };
+
+ i2c@80122000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c1_default_mode>;
+ pinctrl-1 = <&i2c1_sleep_mode>;
+ };
+
i2c@80128000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c2_default_mode>;
+ pinctrl-1 = <&i2c2_sleep_mode>;
lp5521@33 {
compatible = "national,lp5521";
reg = <0x33>;
@@ -85,6 +105,12 @@
};
};
+ i2c@80110000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c3_default_mode>;
+ pinctrl-1 = <&i2c3_sleep_mode>;
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
@@ -94,8 +120,9 @@
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
-
- cd-gpios = <&tc3589x_gpio 3 0x4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi0_default_mode>;
+ pinctrl-1 = <&sdi0_sleep_mode>;
status = "okay";
};
@@ -105,6 +132,9 @@
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi1_default_mode>;
+ pinctrl-1 = <&sdi1_sleep_mode>;
status = "okay";
};
@@ -115,6 +145,9 @@
max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi2_default_mode>;
+ pinctrl-1 = <&sdi2_sleep_mode>;
status = "okay";
};
@@ -126,6 +159,9 @@
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi4_default_mode>;
+ pinctrl-1 = <&sdi4_sleep_mode>;
status = "okay";
};
@@ -137,7 +173,21 @@
stericsson,audio-codec = <&codec>;
};
+ msp0: msp@80123000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp0_default_mode>;
+ status = "okay";
+ };
+
msp1: msp@80124000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp1_default_mode>;
+ status = "okay";
+ };
+
+ msp2: msp@80117000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp2_default_mode>;
status = "okay";
};
@@ -198,5 +248,11 @@
};
};
};
+
+ mcde@a0350000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_default_mode>;
+ pinctrl-1 = <&lcd_sleep_mode>;
+ };
};
};
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index b2cd7bc..40f0ecd 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -28,18 +28,20 @@
reg = <0x33>;
};
- tc3589x@42 {
- compatible = "tc3589x";
+ tc35892@42 {
+ compatible = "toshiba,tc35892";
reg = <0x42>;
interrupt-parent = <&gpio6>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tc35892_hrefprev60_mode>;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <1>;
tc3589x_gpio: tc3589x_gpio {
compatible = "tc3589x-gpio";
- interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <0>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -49,11 +51,77 @@
};
};
+ ssp@80002000 {
+ /*
+ * On the first generation boards, this SSP/SPI port was connected
+ * to the AB8500.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_hrefprev60_mode>;
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ cd-gpios = <&tc3589x_gpio 3 0x4>;
+ };
+
vmmci: regulator-gpio {
gpios = <&tc3589x_gpio 18 0x4>;
enable-gpio = <&tc3589x_gpio 17 0x4>;
+ };
- status = "okay";
+ pinctrl {
+ /* Set this up using hogs */
+ pinctrl-names = "default";
+ pinctrl-0 = <&ipgpio_hrefprev60_mode>;
+
+ ssp0 {
+ ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
+ hrefprev60_mux {
+ ste,function = "ssp0";
+ ste,pins = "ssp0_a_1";
+ };
+ hrefprev60_cfg1 {
+ ste,pins = "GPIO145_C13"; /* RXD */
+ ste,config = <&in_pd>;
+ };
+
+ };
+ };
+ sdi0 {
+ /* This additional pin needed on early MOP500 and HREFs previous to v60 */
+ sdi0_default_mode: sdi0_default {
+ hrefprev60_mux {
+ ste,function = "mc0";
+ ste,pins = "mc0dat31dir_a_1";
+ };
+ hrefprev60_cfg1 {
+ ste,pins = "GPIO21_AB3"; /* DAT31DIR */
+ ste,config = <&out_hi>;
+ };
+
+ };
+ };
+ tc35892 {
+ tc35892_hrefprev60_mode: tc35892_hrefprev60 {
+ hrefprev60_cfg {
+ ste,pins = "GPIO217_AH12";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ ipgpio {
+ ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
+ hrefprev60_mux {
+ ste,function = "ipgpio";
+ ste,pins = "ipgpio0_c_1", "ipgpio1_c_1";
+ };
+ hrefprev60_cfg1 {
+ ste,pins = "GPIO6_AF6", "GPIO7_AG5";
+ ste,config = <&in_pu>;
+ };
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index aed511b..3b6d118 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -16,55 +16,226 @@
model = "ST-Ericsson HREF (v60+) platform with Device Tree";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
- gpio_keys {
- button@1 {
- gpios = <&gpio5 25 0x4>;
- };
- };
-
soc {
// External Micro SD slot
sdi0_per1@80126000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
- vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
cd-gpios = <&gpio2 31 0x4>; // 95
-
- status = "okay";
};
- // WLAN SDIO channel
- sdi1_per2@80118000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <4>;
-
- status = "okay";
+ vmmci: regulator-gpio {
+ gpios = <&gpio0 5 0x4>;
+ enable-gpio = <&gpio5 9 0x4>;
};
- // PoP:ed eMMC
- sdi2_per3@80005000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <8>;
- mmc-cap-mmc-highspeed;
+ pinctrl {
+ /*
+ * Set this up using hogs, as time goes by and as seems fit, these
+ * can be moved over to being controlled by respective device.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&ipgpio_hrefv60_mode>,
+ <&accel_hrefv60_mode>,
+ <&magneto_hrefv60_mode>,
+ <&etm_hrefv60_mode>,
+ <&nahj_hrefv60_mode>,
+ <&nfc_hrefv60_mode>,
+ <&force_hrefv60_mode>,
+ <&dipro_hrefv60_mode>,
+ <&vaudio_hf_hrefv60_mode>,
+ <&gbf_hrefv60_mode>,
+ <&hdtv_hrefv60_mode>,
+ <&touch_hrefv60_mode>;
- status = "okay";
- };
-
- // On-board eMMC
- sdi4_per2@80114000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <8>;
- mmc-cap-mmc-highspeed;
- vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
- status = "okay";
+ sdi0 {
+ /* SD card detect GPIO pin, extend default state */
+ sdi0_default_mode: sdi0_default {
+ default_hrefv60_cfg1 {
+ ste,pins = "GPIO95_E8";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ ipgpio {
+ /*
+ * XENON Flashgun on image processor GPIO (controlled from image
+ * processor firmware), mux in these image processor GPIO lines 0
+ * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
+ * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
+ * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
+ */
+ ipgpio_hrefv60_mode: ipgpio_hrefv60 {
+ hrefv60_mux {
+ ste,function = "ipgpio";
+ ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
+ };
+ hrefv60_cfg1 {
+ ste,pins = "GPIO6_AF6", "GPIO7_AG5";
+ ste,config = <&in_pu>;
+ };
+ hrefv60_cfg2 {
+ ste,pins = "GPIO21_AB3";
+ ste,config = <&gpio_out_lo>;
+ };
+ hrefv60_cfg3 {
+ ste,pins = "GPIO64_F3";
+ ste,config = <&out_lo>;
+ };
+ };
+ };
+ accelerometer {
+ accel_hrefv60_mode: accel_hrefv60 {
+ /* Accelerometer interrupt lines 1 & 2 */
+ hrefv60_cfg1 {
+ ste,pins = "GPIO82_C1", "GPIO83_D3";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ magnetometer {
+ magneto_hrefv60_mode: magneto_hrefv60 {
+ /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+ hrefv60_cfg1 {
+ ste,pins = "GPIO31_V3";
+ ste,config = <&gpio_in_pu>;
+ };
+ hrefv60_cfg2 {
+ ste,pins = "GPIO32_V2";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ etm {
+ /*
+ * Drive D19-D23 for the ETM PTM trace interface low,
+ * (presumably pins are unconnected therefore grounded here,
+ * the "other alt C1" setting enables these pins)
+ */
+ etm_hrefv60_mode: etm_hrefv60 {
+ hrefv60_cfg1 {
+ ste,pins =
+ "GPIO70_G5",
+ "GPIO71_G4",
+ "GPIO72_H4",
+ "GPIO73_H3",
+ "GPIO74_J3";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ nahj {
+ nahj_hrefv60_mode: nahj_hrefv60 {
+ /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
+ hrefv60_cfg1 {
+ ste,pins = "GPIO76_J2";
+ ste,config = <&gpio_out_lo>;
+ };
+ hrefv60_cfg2 {
+ ste,pins = "GPIO216_AG12";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ nfc {
+ nfc_hrefv60_mode: nfc_hrefv60 {
+ /* NFC ENA and RESET to low, pulldown IRQ line */
+ hrefv60_cfg1 {
+ ste,pins =
+ "GPIO77_H1", /* NFC_ENA */
+ "GPIO142_C11"; /* NFC_RESET */
+ ste,config = <&gpio_out_lo>;
+ };
+ hrefv60_cfg2 {
+ ste,pins = "GPIO144_B13"; /* NFC_IRQ */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ force {
+ force_hrefv60_mode: force_hrefv60 {
+ hrefv60_cfg1 {
+ ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
+ ste,config = <&gpio_in_pu>;
+ };
+ hrefv60_cfg2 {
+ ste,pins =
+ "GPIO92_D6", /* FORCE_SENSING_RST */
+ "GPIO97_D9"; /* FORCE_SENSING_WU */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ dipro {
+ dipro_hrefv60_mode: dipro_hrefv60 {
+ hrefv60_cfg1 {
+ ste,pins = "GPIO139_C9"; /* DIPRO_INT */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ vaudio_hf {
+ vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
+ /* Audio Amplifier HF enable GPIO */
+ hrefv60_cfg1 {
+ ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ gbf {
+ gbf_hrefv60_mode: gbf_hrefv60 {
+ /*
+ * GBF (GPS, Bluetooth, FM-radio) interface,
+ * pull low to reset state
+ */
+ hrefv60_cfg1 {
+ ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ hdtv {
+ hdtv_hrefv60_mode: hdtv_hrefv60 {
+ /* MSP : HDTV INTERFACE GPIO line */
+ hrefv60_cfg1 {
+ ste,pins = "GPIO192_AJ27";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ touch {
+ touch_hrefv60_mode: touch_hrefv60 {
+ /*
+ * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
+ * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
+ * reset signals low.
+ */
+ hrefv60_cfg1 {
+ ste,pins = "GPIO143_D12", "GPIO146_D13";
+ ste,config = <&gpio_out_lo>;
+ };
+ hrefv60_cfg2 {
+ ste,pins = "GPIO67_G2";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ mcde {
+ lcd_hrefv60_mode: lcd_hrefv60 {
+ /*
+ * Display Interface 1 uses GPIO 65 for RST (reset).
+ * Display Interface 2 uses GPIO 66 for RST (reset).
+ * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
+ */
+ hrefv60_cfg1 {
+ ste,pins ="GPIO65_F1";
+ ste,config = <&gpio_out_hi>;
+ };
+ hrefv60_cfg2 {
+ ste,pins ="GPIO66_G3";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
index efddee9..e6f22b2 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -31,17 +31,57 @@
ste,output = <OUTPUT_LOW>;
};
+ gpio_in_pu: gpio_input_pull_up {
+ ste,gpio = <GPIOMODE_ENABLED>;
+ ste,input = <INPUT_PULLUP>;
+ };
+
+ gpio_in_pd: gpio_input_pull_down {
+ ste,gpio = <GPIOMODE_ENABLED>;
+ ste,input = <INPUT_PULLDOWN>;
+ };
+
gpio_out_lo: gpio_output_low {
ste,gpio = <GPIOMODE_ENABLED>;
ste,output = <OUTPUT_LOW>;
};
+ gpio_out_hi: gpio_output_high {
+ ste,gpio = <GPIOMODE_ENABLED>;
+ ste,output = <OUTPUT_HIGH>;
+ };
+
+ slpm_pdis: slpm_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ slpm_wkup_pdis: slpm_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ slpm_wkup_pdis_en: slpm_wkup_pdis_en {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+ };
+
slpm_in_pu: slpm_in_pu {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_INPUT_PULLUP>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
+ slpm_in_pdis: slpm_in_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-input = <SLPM_DIR_INPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
slpm_in_wkup_pdis: slpm_in_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_DIR_INPUT>;
@@ -49,6 +89,20 @@
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
+ slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-input = <SLPM_DIR_INPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+ };
+
+ slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-input = <SLPM_INPUT_PULLUP>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+ };
+
slpm_out_lo: slpm_out_lo {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_LOW>;
@@ -68,6 +122,20 @@
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
+ slpm_out_lo_pdis: slpm_out_lo_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_LOW>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_LOW>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
slpm_out_wkup_pdis: slpm_out_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_DIR_OUTPUT>;
@@ -81,6 +149,18 @@
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
+ in_wkup_pdis_en: in_wkup_pdis_en {
+ ste,sleep-input = <SLPM_DIR_INPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+ };
+
+ out_lo_wkup_pdis: out_lo_wkup_pdis {
+ ste,sleep-output = <SLPM_OUTPUT_LOW>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
out_hi_wkup_pdis: out_hi_wkup_pdis {
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 16c3888..f557feb 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -67,10 +67,6 @@
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
- /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
- ethernet-gpio {
- gpios = <&gpio3 8 0x1>;
- };
/* This will bias the MMC/SD card detect line */
mmcsd-gpio {
gpios = <&gpio3 16 0x1>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 79425e3..5acc044 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -769,14 +769,14 @@
#size-cells = <1>;
ranges;
- vica: intc@0x10140000 {
+ vica: intc@10140000 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10140000 0x20>;
};
- vicb: intc@0x10140020 {
+ vicb: intc@10140020 {
compatible = "arm,versatile-vic";
interrupt-controller;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index f0b39f8..97d5d21 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "ste-dbx5x0.dtsi"
+#include "ste-href-family-pinctrl.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
@@ -75,6 +76,8 @@
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpioled_snowball_mode>;
used-led {
label = "user_led";
gpios = <&gpio4 14 0x4>;
@@ -84,6 +87,11 @@
};
soc {
+ usb_per5@a03e0000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&musb_default_mode>;
+ pinctrl-1 = <&musb_sleep_mode>;
+ };
sound {
compatible = "stericsson,snd-soc-mop500";
@@ -92,7 +100,21 @@
stericsson,audio-codec = <&codec>;
};
+ msp0: msp@80123000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp0_default_mode>;
+ status = "okay";
+ };
+
msp1: msp@80124000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp1_default_mode>;
+ status = "okay";
+ };
+
+ msp2: msp@80117000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp2_default_mode>;
status = "okay";
};
@@ -110,6 +132,8 @@
interrupt-parent = <&gpio4>;
vdd33a-supply = <&en_3v3_reg>;
vddvario-supply = <&db8500_vape_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_snowball_mode>;
reg-shift = <1>;
reg-io-width = <2>;
@@ -122,10 +146,8 @@
};
vmmci: regulator-gpio {
- gpios = <&gpio6 25 0x4>;
- enable-gpio = <&gpio7 4 0x4>;
-
- status = "okay";
+ gpios = <&gpio7 4 0x4>;
+ enable-gpio = <&gpio6 25 0x4>;
};
// External Micro SD slot
@@ -136,6 +158,9 @@
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi0_default_mode>;
+ pinctrl-1 = <&sdi0_sleep_mode>;
cd-gpios = <&gpio6 26 0x4>; // 218
cd-inverted;
@@ -143,6 +168,27 @@
status = "okay";
};
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi1_default_mode>;
+ pinctrl-1 = <&sdi1_sleep_mode>;
+
+ status = "okay";
+ };
+
+ // Unused PoP eMMC - register and put it to sleep by default */
+ sdi2_per3@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdi2_sleep_mode>;
+
+ status = "okay";
+ };
+
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
@@ -150,22 +196,63 @@
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdi4_default_mode>;
+ pinctrl-1 = <&sdi4_sleep_mode>;
status = "okay";
};
uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart0_default_mode>;
+ pinctrl-1 = <&uart0_sleep_mode>;
status = "okay";
};
uart@80121000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart1_default_mode>;
+ pinctrl-1 = <&uart1_sleep_mode>;
status = "okay";
};
uart@80007000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart2_default_mode>;
+ pinctrl-1 = <&uart2_sleep_mode>;
status = "okay";
};
+ i2c@80004000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c0_default_mode>;
+ pinctrl-1 = <&i2c0_sleep_mode>;
+ };
+
+ i2c@80122000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c1_default_mode>;
+ pinctrl-1 = <&i2c1_sleep_mode>;
+ };
+
+ i2c@80128000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c2_default_mode>;
+ pinctrl-1 = <&i2c2_sleep_mode>;
+ };
+
+ i2c@80110000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c3_default_mode>;
+ pinctrl-1 = <&i2c3_sleep_mode>;
+ };
+
+ ssp@80002000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_snowball_mode>;
+ };
+
cpufreq-cooling {
status = "okay";
};
@@ -266,5 +353,141 @@
};
};
};
+
+ pinctrl {
+ /*
+ * Set this up using hogs, as time goes by and as seems fit, these
+ * can be moved over to being controlled by respective device.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_snowball_mode>,
+ <&magneto_snowball_mode>,
+ <&gbf_snowball_mode>,
+ <&wlan_snowball_mode>;
+
+ ethernet {
+ /*
+ * Mux in "SM" which is used for the
+ * SMSC911x Ethernet adapter
+ */
+ eth_snowball_mode: eth_snowball {
+ snowball_mux {
+ ste,function = "sm";
+ ste,pins = "sm_b_1";
+ };
+ /* LAN IRQ pin */
+ snowball_cfg1 {
+ ste,pins = "GPIO140_B11";
+ ste,config = <&in_nopull>;
+ };
+ /* LAN reset pin */
+ snowball_cfg2 {
+ ste,pins = "GPIO141_C12";
+ ste,config = <&gpio_out_hi>;
+ };
+
+ };
+ };
+ sdi0 {
+ sdi0_default_mode: sdi0_default {
+ snowball_mux {
+ ste,function = "mc0";
+ ste,pins = "mc0dat31dir_a_1";
+ };
+ snowball_cfg1 {
+ ste,pins = "GPIO21_AB3"; /* DAT31DIR */
+ ste,config = <&out_hi>;
+ };
+
+ };
+ };
+ ssp0 {
+ ssp0_snowball_mode: ssp0_snowball_default {
+ snowball_mux {
+ ste,function = "ssp0";
+ ste,pins = "ssp0_a_1";
+ };
+ snowball_cfg1 {
+ ste,pins = "GPIO144_B13"; /* FRM */
+ ste,config = <&gpio_out_hi>;
+ };
+ snowball_cfg2 {
+ ste,pins = "GPIO145_C13"; /* RXD */
+ ste,config = <&in_pd>;
+ };
+ snowball_cfg3 {
+ ste,pins =
+ "GPIO146_D13", /* TXD */
+ "GPIO143_D12"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+
+ };
+ };
+ gpio_led {
+ gpioled_snowball_mode: gpioled_default {
+ snowball_cfg1 {
+ ste,pins = "GPIO142_C11";
+ ste,config = <&gpio_out_hi>;
+ };
+
+ };
+ };
+ accelerometer {
+ accel_snowball_mode: accel_snowball {
+ /* Accelerometer lines */
+ snowball_cfg1 {
+ ste,pins =
+ "GPIO163_C20", /* ACCEL_IRQ1 */
+ "GPIO164_B21"; /* ACCEL_IRQ2 */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ magnetometer {
+ magneto_snowball_mode: magneto_snowball {
+ snowball_cfg1 {
+ ste,pins = "GPIO165_C21"; /* MAG_DRDY */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ gbf {
+ gbf_snowball_mode: gbf_snowball {
+ /*
+ * GBF (GPS, Bluetooth, FM-radio) interface,
+ * pull low to reset state
+ */
+ snowball_cfg1 {
+ ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ wlan {
+ wlan_snowball_mode: wlan_snowball {
+ /*
+ * Activate this mode with the WLAN chip.
+ * These are plain GPIO pins used by WLAN
+ */
+ snowball_cfg1 {
+ ste,pins =
+ "GPIO161_D21", /* WLAN_PMU_EN */
+ "GPIO215_AH13"; /* WLAN_ENA */
+ ste,config = <&gpio_out_lo>;
+ };
+ snowball_cfg2 {
+ ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ };
+
+ mcde@a0350000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_default_mode>;
+ pinctrl-1 = <&lcd_sleep_mode>;
+ };
};
};
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index 1d322b2..e56449d 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -86,6 +86,24 @@
};
};
};
+
+ sbc_i2c0 {
+ pinctrl_sbc_i2c0_default: sbc_i2c0-default {
+ st,pins {
+ sda = <&PIO4 6 ALT1 BIDIR>;
+ scl = <&PIO4 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ sbc_i2c1 {
+ pinctrl_sbc_i2c1_default: sbc_i2c1-default {
+ st,pins {
+ sda = <&PIO3 2 ALT2 BIDIR>;
+ scl = <&PIO3 1 ALT2 BIDIR>;
+ };
+ };
+ };
};
pin-controller-front {
@@ -143,6 +161,24 @@
reg = <0x7000 0x100>;
st,bank-name = "PIO12";
};
+
+ i2c0 {
+ pinctrl_i2c0_default: i2c0-default {
+ st,pins {
+ sda = <&PIO9 3 ALT1 BIDIR>;
+ scl = <&PIO9 2 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_default: i2c1-default {
+ st,pins {
+ sda = <&PIO12 1 ALT1 BIDIR>;
+ scl = <&PIO12 0 ALT1 BIDIR>;
+ };
+ };
+ };
};
pin-controller-rear {
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index 74ab8de..d9c7dd1 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -9,6 +9,7 @@
#include "stih41x.dtsi"
#include "stih415-clock.dtsi"
#include "stih415-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
L2: cache-controller {
@@ -83,5 +84,57 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sbc_serial1>;
};
+
+ i2c@fed40000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfed40000 0x110>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLKS_ICN_REG_0>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ status = "disabled";
+ };
+
+ i2c@fed41000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfed41000 0x110>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLKS_ICN_REG_0>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+
+ status = "disabled";
+ };
+
+ i2c@fe540000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfe540000 0x110>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_SYSIN>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_i2c0_default>;
+
+ status = "disabled";
+ };
+
+ i2c@fe541000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfe541000 0x110>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_SYSIN>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_i2c1_default>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 0f246c9..b29ff4b 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -97,6 +97,24 @@
};
};
};
+
+ sbc_i2c0 {
+ pinctrl_sbc_i2c0_default: sbc_i2c0-default {
+ st,pins {
+ sda = <&PIO4 6 ALT1 BIDIR>;
+ scl = <&PIO4 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ sbc_i2c1 {
+ pinctrl_sbc_i2c1_default: sbc_i2c1-default {
+ st,pins {
+ sda = <&PIO3 2 ALT2 BIDIR>;
+ scl = <&PIO3 1 ALT2 BIDIR>;
+ };
+ };
+ };
};
pin-controller-front {
@@ -175,6 +193,23 @@
};
};
+ i2c0 {
+ pinctrl_i2c0_default: i2c0-default {
+ st,pins {
+ sda = <&PIO9 3 ALT1 BIDIR>;
+ scl = <&PIO9 2 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_default: i2c1-default {
+ st,pins {
+ sda = <&PIO12 1 ALT1 BIDIR>;
+ scl = <&PIO12 0 ALT1 BIDIR>;
+ };
+ };
+ };
};
pin-controller-rear {
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 1a0326e..b7ab47b 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -9,6 +9,7 @@
#include "stih41x.dtsi"
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
L2: cache-controller {
compatible = "arm,pl310-cache";
@@ -92,5 +93,57 @@
pinctrl-0 = <&pinctrl_sbc_serial1>;
clocks = <&CLK_SYSIN>;
};
+
+ i2c@fed40000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfed40000 0x110>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_S_ICN_REG_0>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ status = "disabled";
+ };
+
+ i2c@fed41000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfed41000 0x110>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_S_ICN_REG_0>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+
+ status = "disabled";
+ };
+
+ i2c@fe540000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfe540000 0x110>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_SYSIN>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_i2c0_default>;
+
+ status = "disabled";
+ };
+
+ i2c@fe541000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0xfe541000 0x110>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&CLK_SYSIN>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_i2c1_default>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index 8e694d2..1e6aa92 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -37,5 +37,14 @@
};
};
+ /* HDMI Tx I2C */
+ i2c@fed41000 {
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ i2c-min-scl-pulse-width-us = <0>;
+ i2c-min-sda-pulse-width-us = <5>;
+
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index 133e181..0ef0a69 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -38,5 +38,27 @@
default-state = "off";
};
};
+
+ i2c@fed40000 {
+ status = "okay";
+ };
+
+ /* HDMI Tx I2C */
+ i2c@fed41000 {
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ i2c-min-scl-pulse-width-us = <0>;
+ i2c-min-sda-pulse-width-us = <5>;
+
+ status = "okay";
+ };
+
+ i2c@fe540000 {
+ status = "okay";
+ };
+
+ i2c@fe541000 {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index eb4d73b..d4b081d 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -18,10 +18,6 @@
model = "Mele A1000";
compatible = "mele,a1000", "allwinner,sun4i-a10";
- aliases {
- serial0 = &uart0;
- };
-
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 425a7db..b139ee6b 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -17,15 +17,6 @@
model = "Cubietech Cubieboard";
compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
- chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
- };
-
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index b3ae51f..3a1595f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -18,10 +18,6 @@
model = "Miniand Hackberry";
compatible = "miniand,hackberry", "allwinner,sun4i-a10";
- chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
- };
-
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 0c1447c..70b3323 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -18,10 +18,6 @@
model = "PineRiver Mini X-Plus";
compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
- chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
- };
-
soc@01c00000 {
uart0: serial@01c28000 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 319cc6b..040bb0e 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -15,6 +15,12 @@
/ {
interrupt-parent = <&intc>;
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -66,6 +72,29 @@
clocks = <&osc24M>;
};
+ pll4: pll4@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
@@ -131,12 +160,11 @@
"apb0_ir1", "apb0_keypad";
};
- /* dummy is pll62 */
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&dummy>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
@@ -158,6 +186,126 @@
"apb1_uart4", "apb1_uart5", "apb1_uart6",
"apb1_uart7";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ mmc3_clk: clk@01c20094 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20094 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc3";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ pata_clk: clk@01c200ac {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200ac 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "pata";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ ir1_clk: clk@01c200b4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir1";
+ };
+
+ spi3_clk: clk@01c200d4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200d4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi3";
+ };
};
soc@01c00000 {
@@ -266,11 +414,23 @@
reg = <0x01c20c90 0x10>;
};
+ rtc: rtc@01c20d00 {
+ compatible = "allwinner,sun4i-rtc";
+ reg = <0x01c20d00 0x20>;
+ interrupts = <24>;
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-sid";
reg = <0x01c23800 0x10>;
};
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun4i-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <29>;
+ };
+
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 5247674..9bb3a0d 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -16,6 +16,10 @@
/ {
interrupt-parent = <&intc>;
+ aliases {
+ ethernet0 = &emac;
+ };
+
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
@@ -63,6 +67,29 @@
clocks = <&osc24M>;
};
+ pll4: pll4@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
@@ -123,12 +150,11 @@
"apb0_ir", "apb0_keypad";
};
- /* dummy is pll62 */
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&dummy>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
@@ -147,6 +173,102 @@
"apb1_i2c2", "apb1_uart0", "apb1_uart1",
"apb1_uart2", "apb1_uart3";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
};
soc@01c00000 {
@@ -260,6 +382,12 @@
reg = <0x01c23800 0x10>;
};
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun4i-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <29>;
+ };
+
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 0000000..fe2ce0a
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a13.dtsi"
+
+/ {
+ model = "Olimex A13-Olinuxino Micro";
+ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+ soc@01c00000 {
+ pinctrl@01c20800 {
+ led_pins_olinuxinom: led_pins@0 {
+ allwinner,pins = "PG9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <1>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart1: serial@01c28400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinom>;
+
+ power {
+ label = "a13-olinuxino-micro:green:power";
+ gpios = <&pio 6 9 0>;
+ default-state = "on";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 9e508dc..a4ba5ff 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -18,10 +18,6 @@
model = "Olimex A13-Olinuxino";
compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
- chosen {
- bootargs = "earlyprintk console=ttyS0,115200";
- };
-
soc@01c00000 {
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index ce8ef2a..4dee971 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -67,6 +67,29 @@
clocks = <&osc24M>;
};
+ pll4: pll4@01c20018 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
+ };
+
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
@@ -125,12 +148,11 @@
clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
};
- /* dummy is pll6 */
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&dummy>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
@@ -148,6 +170,102 @@
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_uart1", "apb1_uart3";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
};
soc@01c00000 {
@@ -227,6 +345,12 @@
reg = <0x01c23800 0x10>;
};
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun4i-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <29>;
+ };
+
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c1751a6..6dd9393 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -209,6 +209,24 @@
};
};
+ ahb1_rst: reset@01c202c0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-ahb1-reset";
+ reg = <0x01c202c0 0xc>;
+ };
+
+ apb1_rst: reset@01c202d0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d0 0x4>;
+ };
+
+ apb2_rst: reset@01c202d8 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d8 0x4>;
+ };
+
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0xa0>;
@@ -232,6 +250,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
+ resets = <&apb2_rst 16>;
status = "disabled";
};
@@ -242,6 +261,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
+ resets = <&apb2_rst 17>;
status = "disabled";
};
@@ -252,6 +272,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
+ resets = <&apb2_rst 18>;
status = "disabled";
};
@@ -262,6 +283,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
+ resets = <&apb2_rst 19>;
status = "disabled";
};
@@ -272,6 +294,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
+ resets = <&apb2_rst 20>;
status = "disabled";
};
@@ -282,6 +305,7 @@
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
+ resets = <&apb2_rst 21>;
status = "disabled";
};
@@ -295,5 +319,15 @@
#interrupt-cells = <3>;
interrupts = <1 9 0xf04>;
};
+
+ cpucfg@01f01c00 {
+ compatible = "allwinner,sun6i-a31-cpuconfig";
+ reg = <0x01f01c00 0x300>;
+ };
+
+ prcm@01f01c00 {
+ compatible = "allwinner,sun6i-a31-prcm";
+ reg = <0x01f01400 0x200>;
+ };
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8a1009d..f9dcb61 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -33,6 +33,24 @@
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
};
leds {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e46cfed..0d54998 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -16,6 +16,10 @@
/ {
interrupt-parent = <&gic>;
+ aliases {
+ ethernet0 = &emac;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -49,10 +53,11 @@
clock-frequency = <24000000>;
};
- osc32k: osc32k {
+ osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
+ clock-output-names = "osc32k";
};
pll1: pll1@01c20000 {
@@ -62,23 +67,34 @@
clocks = <&osc24M>;
};
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- pll6: pll6 {
+ pll4: pll4@01c20018 {
#clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
+ compatible = "allwinner,sun4i-pll1-clk";
+ reg = <0x01c20018 0x4>;
+ clocks = <&osc24M>;
+ };
+
+ pll5: pll5@01c20020 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll5-clk";
+ reg = <0x01c20020 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll5_ddr", "pll5_other";
+ };
+
+ pll6: pll6@01c20028 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-pll6-clk";
+ reg = <0x01c20028 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll6_sata", "pll6_other", "pll6";
};
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
};
axi: axi@01c20054 {
@@ -137,7 +153,7 @@
#clock-cells = <0>;
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6>, <&osc32k>;
+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
@@ -159,6 +175,162 @@
"apb1_uart2", "apb1_uart3", "apb1_uart4",
"apb1_uart5", "apb1_uart6", "apb1_uart7";
};
+
+ nand_clk: clk@01c20080 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20080 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "nand";
+ };
+
+ ms_clk: clk@01c20084 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20084 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ms";
+ };
+
+ mmc0_clk: clk@01c20088 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20088 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc0";
+ };
+
+ mmc1_clk: clk@01c2008c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2008c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc1";
+ };
+
+ mmc2_clk: clk@01c20090 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20090 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc2";
+ };
+
+ mmc3_clk: clk@01c20094 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20094 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "mmc3";
+ };
+
+ ts_clk: clk@01c20098 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c20098 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ts";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ss";
+ };
+
+ spi0_clk: clk@01c200a0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi0";
+ };
+
+ spi1_clk: clk@01c200a4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi1";
+ };
+
+ spi2_clk: clk@01c200a8 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200a8 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi2";
+ };
+
+ pata_clk: clk@01c200ac {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200ac 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "pata";
+ };
+
+ ir0_clk: clk@01c200b0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b0 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir0";
+ };
+
+ ir1_clk: clk@01c200b4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200b4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "ir1";
+ };
+
+ spi3_clk: clk@01c200d4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c200d4 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+ clock-output-names = "spi3";
+ };
+
+ mbus_clk: clk@01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-mod0-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
+ clock-output-names = "mbus";
+ };
+
+ /*
+ * Dummy clock used by output clocks
+ */
+ osc24M_32k: clk@1 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <750>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "osc24M_32k";
+ };
+
+ clk_out_a: clk@01c201f0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-out-clk";
+ reg = <0x01c201f0 0x4>;
+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+ clock-output-names = "clk_out_a";
+ };
+
+ clk_out_b: clk@01c201f4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-out-clk";
+ reg = <0x01c201f4 0x4>;
+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+ clock-output-names = "clk_out_b";
+ };
};
soc@01c00000 {
@@ -246,6 +418,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ clk_out_a_pins_a: clk_out_a@0 {
+ allwinner,pins = "PI12";
+ allwinner,function = "clk_out_a";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ clk_out_b_pins_a: clk_out_b@0 {
+ allwinner,pins = "PI13";
+ allwinner,function = "clk_out_b";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -265,11 +451,23 @@
reg = <0x01c20c90 0x10>;
};
+ rtc: rtc@01c20d00 {
+ compatible = "allwinner,sun7i-a20-rtc";
+ reg = <0x01c20d00 0x20>;
+ interrupts = <0 24 1>;
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
};
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun4i-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <0 29 4>;
+ };
+
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index cb5ec23..73aecfb 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -7,11 +7,42 @@
model = "NVIDIA Tegra114 Dalmore evaluation board";
compatible = "nvidia,dalmore", "nvidia,tegra114";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps65913@58";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x80000000 0x40000000>;
};
- pinmux {
+ host1x@50000000 {
+ hdmi@54280000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_hdmi_reg>;
+ pll-supply = <&palmas_smps3_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ dsi@54300000 {
+ status = "okay";
+
+ panel@0 {
+ compatible = "panasonic,vvx10f004b00",
+ "simple-panel";
+ reg = <0>;
+
+ power-supply = <&avdd_lcd_reg>;
+ backlight = <&backlight>;
+ };
+ };
+ };
+
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -19,41 +50,41 @@
clk1_out_pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
dap1_din_pn1 {
nvidia,pins = "dap1_din_pn1";
nvidia,function = "i2s0";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dap1_dout_pn2 {
nvidia,pins = "dap1_dout_pn2",
"dap1_fs_pn0",
"dap1_sclk_pn3";
nvidia,function = "i2s0";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dap2_din_pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "i2s1";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dap2_dout_pa5 {
nvidia,pins = "dap2_dout_pa5",
"dap2_fs_pa2",
"dap2_sclk_pa3";
nvidia,function = "i2s1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dap4_din_pp5 {
nvidia,pins = "dap4_din_pp5",
@@ -61,17 +92,17 @@
"dap4_fs_pp4",
"dap4_sclk_pp7";
nvidia,function = "i2s3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dvfs_pwm_px0 {
nvidia,pins = "dvfs_pwm_px0",
"dvfs_clk_px2";
nvidia,function = "cldvfs";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
ulpi_clk_py0 {
nvidia,pins = "ulpi_clk_py0",
@@ -84,128 +115,128 @@
"ulpi_data6_po7",
"ulpi_data7_po0";
nvidia,function = "ulpi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
ulpi_dir_py1 {
nvidia,pins = "ulpi_dir_py1",
"ulpi_nxt_py2";
nvidia,function = "ulpi";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
ulpi_stp_py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "ulpi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
cam_i2c_scl_pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1",
"cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
- nvidia,open-drain = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
cam_mclk_pcc0 {
nvidia,pins = "cam_mclk_pcc0",
"pbb0";
nvidia,function = "vi_alt3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
- nvidia,lock = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
};
gen2_i2c_scl_pt5 {
nvidia,pins = "gen2_i2c_scl_pt5",
"gen2_i2c_sda_pt6";
nvidia,function = "i2c2";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
- nvidia,open-drain = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
gmi_a16_pj7 {
nvidia,pins = "gmi_a16_pj7";
nvidia,function = "uartd";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gmi_a17_pb0 {
nvidia,pins = "gmi_a17_pb0",
"gmi_a18_pb1";
nvidia,function = "uartd";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gmi_a19_pk7 {
nvidia,pins = "gmi_a19_pk7";
nvidia,function = "uartd";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gmi_ad5_pg5 {
nvidia,pins = "gmi_ad5_pg5",
"gmi_cs6_n_pi3",
"gmi_wr_n_pi0";
nvidia,function = "spi4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gmi_ad6_pg6 {
nvidia,pins = "gmi_ad6_pg6",
"gmi_ad7_pg7";
nvidia,function = "spi4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gmi_ad12_ph4 {
nvidia,pins = "gmi_ad12_ph4";
nvidia,function = "rsvd4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gmi_ad9_ph1 {
nvidia,pins = "gmi_ad9_ph1";
nvidia,function = "pwm1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gmi_cs1_n_pj2 {
nvidia,pins = "gmi_cs1_n_pj2",
"gmi_oe_n_pi1";
nvidia,function = "soc";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
clk2_out_pw5 {
nvidia,pins = "clk2_out_pw5";
nvidia,function = "extperiph2";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
@@ -214,23 +245,23 @@
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc1_wp_n_pv3 {
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "spi4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
@@ -242,16 +273,16 @@
"sdmmc3_clk_lb_out_pee4",
"sdmmc3_clk_lb_in_pee5";
nvidia,function = "sdmmc3";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc4_cmd_pt7 {
nvidia,pins = "sdmmc4_cmd_pt7",
@@ -264,16 +295,16 @@
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
clk_32k_out_pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "blink";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
kb_col0_pq0 {
nvidia,pins = "kb_col0_pq0",
@@ -283,265 +314,265 @@
"kb_row1_pr1",
"kb_row2_pr2";
nvidia,function = "kbc";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dap3_din_pp1 {
nvidia,pins = "dap3_din_pp1",
"dap3_sclk_pp3";
nvidia,function = "displayb";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd4";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
kb_row7_pr7 {
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
kb_row10_ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "uarta";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
kb_row9_ps1 {
nvidia,pins = "kb_row9_ps1";
nvidia,function = "uarta";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pwr_i2c_scl_pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
- nvidia,open-drain = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
sys_clk_req_pz5 {
nvidia,pins = "sys_clk_req_pz5";
nvidia,function = "sysclk";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
core_pwr_req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
cpu_pwr_req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pwr_int_n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
reset_out_n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
clk3_out_pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gen1_i2c_scl_pc4 {
nvidia,pins = "gen1_i2c_scl_pc4",
"gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
- nvidia,open-drain = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
uart2_cts_n_pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
uart2_rts_n_pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
uart2_rxd_pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
uart2_txd_pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
uart3_cts_n_pa1 {
nvidia,pins = "uart3_cts_n_pa1",
"uart3_rxd_pw7";
nvidia,function = "uartc";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
uart3_rts_n_pc0 {
nvidia,pins = "uart3_rts_n_pc0",
"uart3_txd_pw6";
nvidia,function = "uartc";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
owr {
nvidia,pins = "owr";
nvidia,function = "owr";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
hdmi_cec_pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
- nvidia,open-drain = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
ddc_scl_pv4 {
nvidia,pins = "ddc_scl_pv4",
"ddc_sda_pv5";
nvidia,function = "i2c4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
- nvidia,rcv-sel = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
};
spdif_in_pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "usb";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
};
usb_vbus_en0_pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "usb";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
- nvidia,lock = <0>;
- nvidia,open-drain = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
gpio_x6_aud_px6 {
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi6";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gpio_x4_aud_px4 {
nvidia,pins = "gpio_x4_aud_px4",
"gpio_x7_aud_px7";
nvidia,function = "rsvd1";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gpio_x5_aud_px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "rsvd1";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gpio_w2_aud_pw2 {
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "rsvd2";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gpio_w3_aud_pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gpio_x1_aud_px1 {
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd4";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gpio_x3_aud_px3 {
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
dap3_fs_pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
dap3_dout_pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pv1 {
nvidia,pins = "pv1";
nvidia,function = "rsvd1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
pbb3 {
nvidia,pins = "pbb3",
@@ -549,25 +580,25 @@
"pbb6",
"pbb7";
nvidia,function = "rsvd4";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pcc1 {
nvidia,pins = "pcc1",
"pcc2";
nvidia,function = "rsvd4";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gmi_ad0_pg0 {
nvidia,pins = "gmi_ad0_pg0",
"gmi_ad1_pg1";
nvidia,function = "gmi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gmi_ad10_ph2 {
nvidia,pins = "gmi_ad10_ph2",
@@ -576,17 +607,17 @@
"gmi_ad8_ph0",
"gmi_clk_pk1";
nvidia,function = "gmi";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
gmi_ad2_pg2 {
nvidia,pins = "gmi_ad2_pg2",
"gmi_ad3_pg3";
nvidia,function = "gmi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gmi_adv_n_pk0 {
nvidia,pins = "gmi_adv_n_pk0",
@@ -598,39 +629,39 @@
"gmi_iordy_pi5",
"gmi_wp_n_pc7";
nvidia,function = "gmi";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
gmi_cs3_n_pk4 {
nvidia,pins = "gmi_cs3_n_pk4";
nvidia,function = "gmi";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
clk2_req_pcc5 {
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
kb_col3_pq3 {
nvidia,pins = "kb_col3_pq3",
"kb_col6_pq6",
"kb_col7_pq7";
nvidia,function = "kbc";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
kb_col5_pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "kbc";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
kb_row3_pr3 {
nvidia,pins = "kb_row3_pr3",
@@ -638,77 +669,77 @@
"kb_row6_pr6",
"kb_row8_ps0";
nvidia,function = "kbc";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
clk3_req_pee1 {
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pu4 {
nvidia,pins = "pu4";
nvidia,function = "displayb";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
pu5 {
nvidia,pins = "pu5",
"pu6";
nvidia,function = "displayb";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
hdmi_int_pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
- nvidia,enable-input = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
clk1_req_pee2 {
nvidia,pins = "clk1_req_pee2",
"usb_vbus_en1_pn5";
nvidia,function = "rsvd4";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
- nvidia,enable-input = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
drive_sdio1 {
nvidia,pins = "drive_sdio1";
- nvidia,high-speed-mode = <1>;
- nvidia,schmitt = <0>;
- nvidia,low-power-mode = <3>;
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <36>;
nvidia,pull-up-strength = <20>;
- nvidia,slew-rate-rising = <2>;
- nvidia,slew-rate-falling = <2>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
};
drive_sdio3 {
nvidia,pins = "drive_sdio3";
- nvidia,high-speed-mode = <1>;
- nvidia,schmitt = <0>;
- nvidia,low-power-mode = <3>;
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <22>;
nvidia,pull-up-strength = <36>;
- nvidia,slew-rate-rising = <0>;
- nvidia,slew-rate-falling = <0>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
};
drive_gma {
nvidia,pins = "drive_gma";
- nvidia,high-speed-mode = <1>;
- nvidia,schmitt = <0>;
- nvidia,low-power-mode = <3>;
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <2>;
nvidia,pull-up-strength = <1>;
- nvidia,slew-rate-rising = <0>;
- nvidia,slew-rate-falling = <0>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
nvidia,drive-type = <1>;
};
};
@@ -718,11 +749,15 @@
status = "okay";
};
+ pwm@7000a000 {
+ status = "okay";
+ };
+
i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
- battery: smart-battery {
+ battery: smart-battery@b {
compatible = "ti,bq20z45", "sbs,sbs-battery";
reg = <0xb>;
battery-name = "battery";
@@ -731,7 +766,7 @@
power-supplies = <&charger>;
};
- rt5640: rt5640 {
+ rt5640: rt5640@1c {
compatible = "realtek,rt5640";
reg = <0x1c>;
interrupt-parent = <&gpio>;
@@ -749,11 +784,15 @@
};
};
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ };
+
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
- tps51632 {
+ tps51632@43 {
compatible = "ti,tps51632";
reg = <0x43>;
regulator-name = "vdd-cpu";
@@ -763,7 +802,7 @@
regulator-always-on;
};
- tps65090 {
+ tps65090@48 {
compatible = "ti,tps65090";
reg = <0x48>;
interrupt-parent = <&gpio>;
@@ -806,7 +845,7 @@
regulator-boot-on;
};
- fet1 {
+ vdd_bl_reg: fet1 {
regulator-name = "vdd-lcd-bl";
};
@@ -814,7 +853,7 @@
regulator-name = "vdd-modem-3v3";
};
- fet4 {
+ avdd_lcd_reg: fet4 {
regulator-name = "avdd-lcd";
};
@@ -846,7 +885,7 @@
};
};
- palmas: tps65913 {
+ palmas: tps65913@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
@@ -1046,7 +1085,7 @@
};
};
- pmc {
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <500>;
@@ -1057,7 +1096,7 @@
nvidia,sys-clock-req-active-high;
};
- ahub {
+ ahub@70080000 {
i2s@70080400 {
status = "okay";
};
@@ -1084,12 +1123,23 @@
vbus-supply = <&usb3_vbus_reg>;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_bl_reg>;
+ pwms = <&pwm 1 1000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -1150,16 +1200,6 @@
gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
};
- lcd_bl_en_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "lcd_bl_en";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
- };
-
usb1_vbus_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 8d42787..389e987 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -1,5 +1,6 @@
#include <dt-bindings/clock/tegra114-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -15,7 +16,113 @@
serial3 = &uartd;
};
- gic: interrupt-controller {
+ host1x@50000000 {
+ compatible = "nvidia,tegra114-host1x", "simple-bus";
+ reg = <0x50000000 0x00028000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+ clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
+ resets = <&tegra_car 28>;
+ reset-names = "host1x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x01000000>;
+
+ gr2d@54140000 {
+ compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_GR2D>;
+ resets = <&tegra_car 21>;
+ reset-names = "2d";
+ };
+
+ gr3d@54180000 {
+ compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d";
+ reg = <0x54180000 0x00040000>;
+ clocks = <&tegra_car TEGRA114_CLK_GR3D>;
+ resets = <&tegra_car 24>;
+ reset-names = "3d";
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_DISP1>,
+ <&tegra_car TEGRA114_CLK_PLL_P>;
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_DISP2>,
+ <&tegra_car TEGRA114_CLK_PLL_P>;
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 26>;
+ reset-names = "dc";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ hdmi@54280000 {
+ compatible = "nvidia,tegra114-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA114_CLK_HDMI>,
+ <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+ clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
+ status = "disabled";
+ };
+
+ dsi@54300000 {
+ compatible = "nvidia,tegra114-dsi";
+ reg = <0x54300000 0x00040000>;
+ clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+ <&tegra_car TEGRA114_CLK_DSIALP>,
+ <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+ clock-names = "dsi", "lp", "parent";
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
+ nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ dsi@54400000 {
+ compatible = "nvidia,tegra114-dsi";
+ reg = <0x54400000 0x00040000>;
+ clocks = <&tegra_car TEGRA114_CLK_DSIB>,
+ <&tegra_car TEGRA114_CLK_DSIBLP>,
+ <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+ clock-names = "dsi", "lp", "parent";
+ resets = <&tegra_car 82>;
+ reset-names = "dsi";
+ nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gic: interrupt-controller@50041000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -39,13 +146,14 @@
clocks = <&tegra_car TEGRA114_CLK_TIMER>;
};
- tegra_car: clock {
+ tegra_car: clock@60006000 {
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
- apbdma: dma {
+ apbdma: dma@6000a000 {
compatible = "nvidia,tegra114-apbdma";
reg = <0x6000a000 0x1400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -81,14 +189,17 @@
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
};
- ahb: ahb {
+ ahb: ahb@6000c004 {
compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
reg = <0x6000c004 0x14c>;
};
- gpio: gpio {
+ gpio: gpio@6000d000 {
compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -105,7 +216,7 @@
interrupt-controller;
};
- pinmux: pinmux {
+ pinmux: pinmux@70000868 {
compatible = "nvidia,tegra114-pinmux";
reg = <0x70000868 0x148 /* Pad control registers */
0x70003000 0x40c>; /* Mux registers */
@@ -124,9 +235,12 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 8>;
- status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTA>;
+ resets = <&tegra_car 6>;
+ reset-names = "serial";
+ dmas = <&apbdma 8>, <&apbdma 8>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
uartb: serial@70006040 {
@@ -134,9 +248,12 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 9>;
- status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTB>;
+ resets = <&tegra_car 7>;
+ reset-names = "serial";
+ dmas = <&apbdma 9>, <&apbdma 9>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
uartc: serial@70006200 {
@@ -144,9 +261,12 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 10>;
- status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTC>;
+ resets = <&tegra_car 55>;
+ reset-names = "serial";
+ dmas = <&apbdma 10>, <&apbdma 10>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
uartd: serial@70006300 {
@@ -154,16 +274,21 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 19>;
- status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTD>;
+ resets = <&tegra_car 65>;
+ reset-names = "serial";
+ dmas = <&apbdma 19>, <&apbdma 19>;
+ dma-names = "rx", "tx";
+ status = "disabled";
};
- pwm: pwm {
+ pwm: pwm@7000a000 {
compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA114_CLK_PWM>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
status = "disabled";
};
@@ -175,6 +300,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C1>;
clock-names = "div-clk";
+ resets = <&tegra_car 12>;
+ reset-names = "i2c";
+ dmas = <&apbdma 21>, <&apbdma 21>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -186,6 +315,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C2>;
clock-names = "div-clk";
+ resets = <&tegra_car 54>;
+ reset-names = "i2c";
+ dmas = <&apbdma 22>, <&apbdma 22>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -197,6 +330,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C3>;
clock-names = "div-clk";
+ resets = <&tegra_car 67>;
+ reset-names = "i2c";
+ dmas = <&apbdma 23>, <&apbdma 23>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -208,6 +345,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C4>;
clock-names = "div-clk";
+ resets = <&tegra_car 103>;
+ reset-names = "i2c";
+ dmas = <&apbdma 26>, <&apbdma 26>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -219,6 +360,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C5>;
clock-names = "div-clk";
+ resets = <&tegra_car 47>;
+ reset-names = "i2c";
+ dmas = <&apbdma 24>, <&apbdma 24>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -226,11 +371,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC1>;
clock-names = "spi";
+ resets = <&tegra_car 41>;
+ reset-names = "spi";
+ dmas = <&apbdma 15>, <&apbdma 15>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -238,11 +386,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC2>;
clock-names = "spi";
+ resets = <&tegra_car 44>;
+ reset-names = "spi";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -250,11 +401,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC3>;
clock-names = "spi";
+ resets = <&tegra_car 46>;
+ reset-names = "spi";
+ dmas = <&apbdma 17>, <&apbdma 17>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -262,11 +416,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC4>;
clock-names = "spi";
+ resets = <&tegra_car 68>;
+ reset-names = "spi";
+ dmas = <&apbdma 18>, <&apbdma 18>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -274,11 +431,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000dc00 0x200>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC5>;
clock-names = "spi";
+ resets = <&tegra_car 104>;
+ reset-names = "spi";
+ dmas = <&apbdma 27>, <&apbdma 27>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -286,37 +446,42 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000de00 0x200>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC6>;
clock-names = "spi";
+ resets = <&tegra_car 105>;
+ reset-names = "spi";
+ dmas = <&apbdma 28>, <&apbdma 28>;
+ dma-names = "rx", "tx";
status = "disabled";
};
- rtc {
+ rtc@7000e000 {
compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_RTC>;
};
- kbc {
+ kbc@7000e200 {
compatible = "nvidia,tegra114-kbc";
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_KBC>;
+ resets = <&tegra_car 36>;
+ reset-names = "kbc";
status = "disabled";
};
- pmc {
+ pmc@7000e400 {
compatible = "nvidia,tegra114-pmc";
reg = <0x7000e400 0x400>;
clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
};
- iommu {
+ iommu@70019010 {
compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
reg = <0x70019010 0x02c
0x700191f0 0x010
@@ -327,32 +492,45 @@
nvidia,ahb = <&ahb>;
};
- ahub {
+ ahub@70080000 {
compatible = "nvidia,tegra114-ahub";
reg = <0x70080000 0x200>,
<0x70080200 0x100>,
<0x70081000 0x200>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 1>, <&apbdma 2>,
- <&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>,
- <&apbdma 12>, <&apbdma 13>, <&apbdma 14>,
- <&apbdma 29>;
clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
- <&tegra_car TEGRA114_CLK_APBIF>,
- <&tegra_car TEGRA114_CLK_I2S0>,
- <&tegra_car TEGRA114_CLK_I2S1>,
- <&tegra_car TEGRA114_CLK_I2S2>,
- <&tegra_car TEGRA114_CLK_I2S3>,
- <&tegra_car TEGRA114_CLK_I2S4>,
- <&tegra_car TEGRA114_CLK_DAM0>,
- <&tegra_car TEGRA114_CLK_DAM1>,
- <&tegra_car TEGRA114_CLK_DAM2>,
- <&tegra_car TEGRA114_CLK_SPDIF_IN>,
- <&tegra_car TEGRA114_CLK_AMX>,
- <&tegra_car TEGRA114_CLK_ADX>;
- clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ <&tegra_car TEGRA114_CLK_APBIF>;
+ clock-names = "d_audio", "apbif";
+ resets = <&tegra_car 106>, /* d_audio */
+ <&tegra_car 107>, /* apbif */
+ <&tegra_car 30>, /* i2s0 */
+ <&tegra_car 11>, /* i2s1 */
+ <&tegra_car 18>, /* i2s2 */
+ <&tegra_car 101>, /* i2s3 */
+ <&tegra_car 102>, /* i2s4 */
+ <&tegra_car 108>, /* dam0 */
+ <&tegra_car 109>, /* dam1 */
+ <&tegra_car 110>, /* dam2 */
+ <&tegra_car 10>, /* spdif */
+ <&tegra_car 153>, /* amx */
+ <&tegra_car 154>; /* adx */
+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
- "spdif_in", "amx", "adx";
+ "spdif", "amx", "adx";
+ dmas = <&apbdma 1>, <&apbdma 1>,
+ <&apbdma 2>, <&apbdma 2>,
+ <&apbdma 3>, <&apbdma 3>,
+ <&apbdma 4>, <&apbdma 4>,
+ <&apbdma 6>, <&apbdma 6>,
+ <&apbdma 7>, <&apbdma 7>,
+ <&apbdma 12>, <&apbdma 12>,
+ <&apbdma 13>, <&apbdma 13>,
+ <&apbdma 14>, <&apbdma 14>,
+ <&apbdma 29>, <&apbdma 29>;
+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+ "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+ "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+ "rx9", "tx9";
ranges;
#address-cells = <1>;
#size-cells = <1>;
@@ -362,6 +540,8 @@
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car TEGRA114_CLK_I2S0>;
+ resets = <&tegra_car 30>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -370,6 +550,8 @@
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
clocks = <&tegra_car TEGRA114_CLK_I2S1>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -378,6 +560,8 @@
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
clocks = <&tegra_car TEGRA114_CLK_I2S2>;
+ resets = <&tegra_car 18>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -386,6 +570,8 @@
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
clocks = <&tegra_car TEGRA114_CLK_I2S3>;
+ resets = <&tegra_car 101>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -394,15 +580,26 @@
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
clocks = <&tegra_car TEGRA114_CLK_I2S4>;
+ resets = <&tegra_car 102>;
+ reset-names = "i2s";
status = "disabled";
};
};
+ mipi: mipi@700e3000 {
+ compatible = "nvidia,tegra114-mipi";
+ reg = <0x700e3000 0x100>;
+ clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+ #nvidia,mipi-calibrate-cells = <1>;
+ };
+
sdhci@78000000 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
status = "disable";
};
@@ -411,6 +608,8 @@
reg = <0x78000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
+ resets = <&tegra_car 9>;
+ reset-names = "sdhci";
status = "disable";
};
@@ -419,6 +618,8 @@
reg = <0x78000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
+ resets = <&tegra_car 69>;
+ reset-names = "sdhci";
status = "disable";
};
@@ -427,6 +628,8 @@
reg = <0x78000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
+ resets = <&tegra_car 15>;
+ reset-names = "sdhci";
status = "disable";
};
@@ -436,6 +639,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USBD>;
+ resets = <&tegra_car 22>;
+ reset-names = "usb";
nvidia,phy = <&phy1>;
status = "disabled";
};
@@ -467,6 +672,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USB3>;
+ resets = <&tegra_car 59>;
+ reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 431d67a..c6dcef5 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1,19 +1,917 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra124.dtsi"
/ {
model = "NVIDIA Tegra124 Venice2";
compatible = "nvidia,venice2", "nvidia,tegra124";
+ aliases {
+ rtc0 = "/i2c@7000d000/as3722@40";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x80000000 0x80000000>;
};
+ pinmux: pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_default>;
+
+ pinmux_default: common {
+ dap_mclk1_pw4 {
+ nvidia,pins = "dap_mclk1_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ dap1_din_pn1 {
+ nvidia,pins = "dap1_din_pn1";
+ nvidia,function = "i2s0";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ dap1_dout_pn2 {
+ nvidia,pins = "dap1_dout_pn2",
+ "dap1_fs_pn0",
+ "dap1_sclk_pn3";
+ nvidia,function = "i2s0";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ dap2_din_pa4 {
+ nvidia,pins = "dap2_din_pa4";
+ nvidia,function = "i2s1";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ dap2_dout_pa5 {
+ nvidia,pins = "dap2_dout_pa5",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3";
+ nvidia,function = "i2s1";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ dvfs_pwm_px0 {
+ nvidia,pins = "dvfs_pwm_px0",
+ "dvfs_clk_px2";
+ nvidia,function = "cldvfs";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "spi1";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ ulpi_dir_py1 {
+ nvidia,pins = "ulpi_dir_py1";
+ nvidia,function = "spi1";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "i2c2";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ pg4 {
+ nvidia,pins = "pg4",
+ "pg5",
+ "pg6",
+ "pi3";
+ nvidia,function = "spi4";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ pg7 {
+ nvidia,pins = "pg7";
+ nvidia,function = "spi4";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ ph1 {
+ nvidia,pins = "ph1";
+ nvidia,function = "pwm1";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ pk0 {
+ nvidia,pins = "pk0",
+ "kb_row15_ps7",
+ "clk_32k_out_pa0";
+ nvidia,function = "soc";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0",
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_clk_lb_out_pee4",
+ "sdmmc3_clk_lb_in_pee5";
+ nvidia,function = "sdmmc3";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc4_cmd_pt7 {
+ nvidia,pins = "sdmmc4_cmd_pt7",
+ "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ jtag_rtck {
+ nvidia,pins = "jtag_rtck";
+ nvidia,function = "rtck";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ clk_32k_in {
+ nvidia,pins = "clk_32k_in";
+ nvidia,function = "clk";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ core_pwr_req {
+ nvidia,pins = "core_pwr_req";
+ nvidia,function = "pwron";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ cpu_pwr_req {
+ nvidia,pins = "cpu_pwr_req";
+ nvidia,function = "cpu";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ pwr_int_n {
+ nvidia,pins = "pwr_int_n";
+ nvidia,function = "pmi";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ reset_out_n {
+ nvidia,pins = "reset_out_n";
+ nvidia,function = "reset_out_n";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ clk3_out_pee0 {
+ nvidia,pins = "clk3_out_pee0";
+ nvidia,function = "extperiph3";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ dap4_din_pp5 {
+ nvidia,pins = "dap4_din_pp5";
+ nvidia,function = "i2s3";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ dap4_dout_pp6 {
+ nvidia,pins = "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "i2s3";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ gen1_i2c_sda_pc5 {
+ nvidia,pins = "gen1_i2c_sda_pc5",
+ "gen1_i2c_scl_pc4";
+ nvidia,function = "i2c1";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ uart2_cts_n_pj5 {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "uartb";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ uart2_rts_n_pj6 {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "uartb";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ uart2_rxd_pc3 {
+ nvidia,pins = "uart2_rxd_pc3";
+ nvidia,function = "irda";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ uart2_txd_pc2 {
+ nvidia,pins = "uart2_txd_pc2";
+ nvidia,function = "irda";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ uart3_cts_n_pa1 {
+ nvidia,pins = "uart3_cts_n_pa1",
+ "uart3_rxd_pw7";
+ nvidia,function = "uartc";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ uart3_rts_n_pc0 {
+ nvidia,pins = "uart3_rts_n_pc0",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi_cec_pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi_int_pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "rsvd1";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ ddc_scl_pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+ };
+ pj7 {
+ nvidia,pins = "pj7",
+ "pk7";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pb0 {
+ nvidia,pins = "pb0",
+ "pb1";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ph0 {
+ nvidia,pins = "ph0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row10_ps2 {
+ nvidia,pins = "kb_row10_ps2";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_row9_ps1 {
+ nvidia,pins = "kb_row9_ps1";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb_row6_pr6 {
+ nvidia,pins = "kb_row6_pr6";
+ nvidia,function = "displaya_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ usb_vbus_en0_pn4 {
+ nvidia,pins = "usb_vbus_en0_pn4";
+ nvidia,function = "usb";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ usb_vbus_en1_pn5 {
+ nvidia,pins = "usb_vbus_en1_pn5";
+ nvidia,function = "usb";
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <32>;
+ nvidia,pull-up-strength = <42>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ };
+ drive_sdio3 {
+ nvidia,pins = "drive_sdio3";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <20>;
+ nvidia,pull-up-strength = <36>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ };
+ drive_gma {
+ nvidia,pins = "drive_gma";
+ nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+ nvidia,pull-down-strength = <1>;
+ nvidia,pull-up-strength = <2>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,drive-type = <1>;
+ };
+ als_irq_l {
+ nvidia,pins = "gpio_x3_aud_px3";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ codec_irq_l {
+ nvidia,pins = "ph4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd_bl_en {
+ nvidia,pins = "ph2";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ touch_irq_l {
+ nvidia,pins = "gpio_w3_aud_pw3";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ tpm_davint_l {
+ nvidia,pins = "ph6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ts_irq_l {
+ nvidia,pins = "pk2";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ ts_reset_l {
+ nvidia,pins = "pk4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ts_shdn_l {
+ nvidia,pins = "pk1";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ph7 {
+ nvidia,pins = "ph7";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb_col0_ap {
+ nvidia,pins = "kb_col0_pq0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lid_open {
+ nvidia,pins = "kb_row4_pr4";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ en_vdd_sd {
+ nvidia,pins = "kb_row0_pr0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ ac_ok {
+ nvidia,pins = "pj0";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sensor_irq_l {
+ nvidia,pins = "pi6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ wifi_en {
+ nvidia,pins = "gpio_x7_aud_px7";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ wifi_rst_l {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "dap";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ hp_det_l {
+ nvidia,pins = "ulpi_data1_po2";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
serial@70006000 {
status = "okay";
};
+ pwm: pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ acodec: audio-codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ as3722: as3722@40 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1_2_4_7 {
+ pins = "gpio1", "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio3_6 {
+ pins = "gpio3", "gpio6";
+ bias-high-impedance;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k-out";
+ };
+ };
+
+ regulators {
+ vsup-sd2-supply = <&vdd_ac_bat_reg>;
+ vsup-sd3-supply = <&vdd_ac_bat_reg>;
+ vsup-sd4-supply = <&vdd_ac_bat_reg>;
+ vsup-sd5-supply = <&vdd_ac_bat_reg>;
+ vin-ldo0-supply = <&as3722_sd2>;
+ vin-ldo1-6-supply = <&vdd_ac_bat_reg>;
+ vin-ldo2-5-7-supply = <&as3722_sd5>;
+ vin-ldo3-4-supply = <&vdd_ac_bat_reg>;
+ vin-ldo9-10-supply = <&vdd_ac_bat_reg>;
+ vin-ldo11-supply = <&vdd_ac_bat_reg>;
+
+ sd0 {
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,external-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "vdd-core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-min-microamp = <2500000>;
+ regulator-max-microamp = <2500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ams,external-control = <1>;
+ };
+
+ as3722_sd2: sd2 {
+ regulator-name = "vddio-ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd3 {
+ regulator-name = "vddio-ddr-2phase";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd4 {
+ regulator-name = "avdd-pex-sata";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ as3722_sd5: sd5 {
+ regulator-name = "vddio-sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sd6 {
+ regulator-name = "vdd-gpu";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3500000>;
+ regulator-max-microamp = <3500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo0 {
+ regulator-name = "avdd_pll";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,external-control = <1>;
+ };
+
+ ldo1 {
+ regulator-name = "run-cam-1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo2 {
+ regulator-name = "gen-avdd,vddio-hsic";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3 {
+ regulator-name = "vdd-rtc";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ams,enable-tracking;
+ };
+
+ ldo4 {
+ regulator-name = "vdd-cam";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5 {
+ regulator-name = "vdd-cam-front";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo6 {
+ regulator-name = "vddio-sdmmc3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo7 {
+ regulator-name = "vdd-cam-rear";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ ldo9 {
+ regulator-name = "vdd-touch";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo10 {
+ regulator-name = "vdd-cam-af";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo11 {
+ regulator-name = "vpp-fuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+ };
+ };
+
+ spi@7000d400 {
+ status = "okay";
+
+ cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ spi-max-frequency = <4000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+
+ google,cros-ec-spi-msg-delay = <2000>;
+
+ cros-ec-keyb {
+ compatible = "google,cros-ec-keyb";
+ keypad,num-rows = <8>;
+ keypad,num-columns = <13>;
+ google,needs-ghost-filter;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+ MATRIX_KEY(0x00, 0x02, KEY_F1)
+ MATRIX_KEY(0x00, 0x03, KEY_B)
+ MATRIX_KEY(0x00, 0x04, KEY_F10)
+ MATRIX_KEY(0x00, 0x06, KEY_N)
+ MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+ MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+ MATRIX_KEY(0x01, 0x01, KEY_ESC)
+ MATRIX_KEY(0x01, 0x02, KEY_F4)
+ MATRIX_KEY(0x01, 0x03, KEY_G)
+ MATRIX_KEY(0x01, 0x04, KEY_F7)
+ MATRIX_KEY(0x01, 0x06, KEY_H)
+ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+ MATRIX_KEY(0x01, 0x09, KEY_F9)
+ MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+ MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+ MATRIX_KEY(0x02, 0x01, KEY_TAB)
+ MATRIX_KEY(0x02, 0x02, KEY_F3)
+ MATRIX_KEY(0x02, 0x03, KEY_T)
+ MATRIX_KEY(0x02, 0x04, KEY_F6)
+ MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+ MATRIX_KEY(0x02, 0x06, KEY_Y)
+ MATRIX_KEY(0x02, 0x07, KEY_102ND)
+ MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+ MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+ MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+ MATRIX_KEY(0x03, 0x02, KEY_F2)
+ MATRIX_KEY(0x03, 0x03, KEY_5)
+ MATRIX_KEY(0x03, 0x04, KEY_F5)
+ MATRIX_KEY(0x03, 0x06, KEY_6)
+ MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+ MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+ MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+ MATRIX_KEY(0x04, 0x01, KEY_A)
+ MATRIX_KEY(0x04, 0x02, KEY_D)
+ MATRIX_KEY(0x04, 0x03, KEY_F)
+ MATRIX_KEY(0x04, 0x04, KEY_S)
+ MATRIX_KEY(0x04, 0x05, KEY_K)
+ MATRIX_KEY(0x04, 0x06, KEY_J)
+ MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+ MATRIX_KEY(0x04, 0x09, KEY_L)
+ MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+ MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+ MATRIX_KEY(0x05, 0x01, KEY_Z)
+ MATRIX_KEY(0x05, 0x02, KEY_C)
+ MATRIX_KEY(0x05, 0x03, KEY_V)
+ MATRIX_KEY(0x05, 0x04, KEY_X)
+ MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+ MATRIX_KEY(0x05, 0x06, KEY_M)
+ MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+ MATRIX_KEY(0x05, 0x09, KEY_DOT)
+ MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+ MATRIX_KEY(0x06, 0x01, KEY_1)
+ MATRIX_KEY(0x06, 0x02, KEY_3)
+ MATRIX_KEY(0x06, 0x03, KEY_4)
+ MATRIX_KEY(0x06, 0x04, KEY_2)
+ MATRIX_KEY(0x06, 0x05, KEY_8)
+ MATRIX_KEY(0x06, 0x06, KEY_7)
+ MATRIX_KEY(0x06, 0x08, KEY_0)
+ MATRIX_KEY(0x06, 0x09, KEY_9)
+ MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+ MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+ MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+ MATRIX_KEY(0x07, 0x01, KEY_Q)
+ MATRIX_KEY(0x07, 0x02, KEY_E)
+ MATRIX_KEY(0x07, 0x03, KEY_R)
+ MATRIX_KEY(0x07, 0x04, KEY_W)
+ MATRIX_KEY(0x07, 0x05, KEY_I)
+ MATRIX_KEY(0x07, 0x06, KEY_U)
+ MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+ MATRIX_KEY(0x07, 0x08, KEY_P)
+ MATRIX_KEY(0x07, 0x09, KEY_O)
+ MATRIX_KEY(0x07, 0x0b, KEY_UP)
+ MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+ >;
+ };
+ };
+ };
+
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
@@ -24,4 +922,170 @@
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
};
+
+ sdhci@700b0400 {
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ bus-width = <4>;
+ };
+
+ sdhci@700b0600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ ahub@70300000 {
+ i2s@70301100 {
+ status = "okay";
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_ac_bat_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_ac_bat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_3v3_modem_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd-modem-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_hdmi_5v0_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vdd-hdmi-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_bl_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "vdd-bl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ vdd_ts_sw_5v0: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "vdd_ts_sw";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ usb1_vbus_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ };
+
+ usb3_vbus_reg: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "usb3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ gpio-open-drain;
+ };
+
+ panel_3v3_reg: regulator@8 {
+ compatible = "regulator-fixed";
+ reg = <8>;
+ regulator-name = "panel_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-max98090-venice2",
+ "nvidia,tegra-audio-max98090";
+ nvidia,model = "NVIDIA Tegra Venice2";
+
+ nvidia,audio-routing =
+ "Headphones", "HPR",
+ "Headphones", "HPL",
+ "Speakers", "SPKR",
+ "Speakers", "SPKL",
+ "Mic Jack", "MICBIAS",
+ "IN34", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&acodec>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index b741300..ec0698a 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -1,4 +1,6 @@
+#include <dt-bindings/clock/tegra124-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -28,6 +30,14 @@
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+ };
+
+ tegra_car: clock@60006000 {
+ compatible = "nvidia,tegra124-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
};
gpio: gpio@6000d000 {
@@ -47,6 +57,53 @@
interrupt-controller;
};
+ apbdma: dma@60020000 {
+ compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+ reg = <0x60020000 0x1400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
+ };
+
+ pinmux: pinmux@70000868 {
+ compatible = "nvidia,tegra124-pinmux";
+ reg = <0x70000868 0x164>, /* Pad control registers */
+ <0x70003000 0x434>; /* Mux registers */
+ };
+
/*
* There are two serial driver i.e. 8250 based simple serial
* driver and APB DMA based serial driver for higher baudrate
@@ -60,6 +117,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+ resets = <&tegra_car 6>;
+ reset-names = "serial";
+ dmas = <&apbdma 8>, <&apbdma 8>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -68,6 +130,11 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+ resets = <&tegra_car 7>;
+ reset-names = "serial";
+ dmas = <&apbdma 9>, <&apbdma 9>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -76,6 +143,11 @@
reg = <0x70006200 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+ resets = <&tegra_car 55>;
+ reset-names = "serial";
+ dmas = <&apbdma 10>, <&apbdma 10>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -84,6 +156,11 @@
reg = <0x70006300 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+ resets = <&tegra_car 65>;
+ reset-names = "serial";
+ dmas = <&apbdma 19>, <&apbdma 19>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -92,6 +169,201 @@
reg = <0x70006400 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_UARTE>;
+ resets = <&tegra_car 66>;
+ reset-names = "serial";
+ dmas = <&apbdma 20>, <&apbdma 20>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ pwm@7000a000 {
+ compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ clocks = <&tegra_car TEGRA124_CLK_PWM>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
+ status = "disabled";
+ };
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+ clock-names = "div-clk";
+ resets = <&tegra_car 12>;
+ reset-names = "i2c";
+ dmas = <&apbdma 21>, <&apbdma 21>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+ reg = <0x7000c400 0x100>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+ clock-names = "div-clk";
+ resets = <&tegra_car 54>;
+ reset-names = "i2c";
+ dmas = <&apbdma 22>, <&apbdma 22>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+ reg = <0x7000c500 0x100>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+ clock-names = "div-clk";
+ resets = <&tegra_car 67>;
+ reset-names = "i2c";
+ dmas = <&apbdma 23>, <&apbdma 23>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c@7000c700 {
+ compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+ reg = <0x7000c700 0x100>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+ clock-names = "div-clk";
+ resets = <&tegra_car 103>;
+ reset-names = "i2c";
+ dmas = <&apbdma 26>, <&apbdma 26>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+ reg = <0x7000d000 0x100>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+ clock-names = "div-clk";
+ resets = <&tegra_car 47>;
+ reset-names = "i2c";
+ dmas = <&apbdma 24>, <&apbdma 24>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c@7000d100 {
+ compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+ reg = <0x7000d100 0x100>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+ clock-names = "div-clk";
+ resets = <&tegra_car 166>;
+ reset-names = "i2c";
+ dmas = <&apbdma 30>, <&apbdma 30>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000d400 {
+ compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+ reg = <0x7000d400 0x200>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+ clock-names = "spi";
+ resets = <&tegra_car 41>;
+ reset-names = "spi";
+ dmas = <&apbdma 15>, <&apbdma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+ reg = <0x7000d600 0x200>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+ clock-names = "spi";
+ resets = <&tegra_car 44>;
+ reset-names = "spi";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+ reg = <0x7000d800 0x200>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+ clock-names = "spi";
+ resets = <&tegra_car 46>;
+ reset-names = "spi";
+ dmas = <&apbdma 17>, <&apbdma 17>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+ reg = <0x7000da00 0x200>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+ clock-names = "spi";
+ resets = <&tegra_car 68>;
+ reset-names = "spi";
+ dmas = <&apbdma 18>, <&apbdma 18>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000dc00 {
+ compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+ reg = <0x7000dc00 0x200>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+ clock-names = "spi";
+ resets = <&tegra_car 104>;
+ reset-names = "spi";
+ dmas = <&apbdma 27>, <&apbdma 27>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ spi@7000de00 {
+ compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+ reg = <0x7000de00 0x200>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+ clock-names = "spi";
+ resets = <&tegra_car 105>;
+ reset-names = "spi";
+ dmas = <&apbdma 28>, <&apbdma 28>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -99,11 +371,157 @@
compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_RTC>;
};
pmc@7000e400 {
compatible = "nvidia,tegra124-pmc";
reg = <0x7000e400 0x400>;
+ clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+ };
+
+ sdhci@700b0000 {
+ compatible = "nvidia,tegra124-sdhci";
+ reg = <0x700b0000 0x200>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ status = "disable";
+ };
+
+ sdhci@700b0200 {
+ compatible = "nvidia,tegra124-sdhci";
+ reg = <0x700b0200 0x200>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+ resets = <&tegra_car 9>;
+ reset-names = "sdhci";
+ status = "disable";
+ };
+
+ sdhci@700b0400 {
+ compatible = "nvidia,tegra124-sdhci";
+ reg = <0x700b0400 0x200>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+ resets = <&tegra_car 69>;
+ reset-names = "sdhci";
+ status = "disable";
+ };
+
+ sdhci@700b0600 {
+ compatible = "nvidia,tegra124-sdhci";
+ reg = <0x700b0600 0x200>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+ resets = <&tegra_car 15>;
+ reset-names = "sdhci";
+ status = "disable";
+ };
+
+ ahub@70300000 {
+ compatible = "nvidia,tegra124-ahub";
+ reg = <0x70300000 0x200>,
+ <0x70300800 0x800>,
+ <0x70300200 0x600>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+ <&tegra_car TEGRA124_CLK_APBIF>;
+ clock-names = "d_audio", "apbif";
+ resets = <&tegra_car 106>, /* d_audio */
+ <&tegra_car 107>, /* apbif */
+ <&tegra_car 30>, /* i2s0 */
+ <&tegra_car 11>, /* i2s1 */
+ <&tegra_car 18>, /* i2s2 */
+ <&tegra_car 101>, /* i2s3 */
+ <&tegra_car 102>, /* i2s4 */
+ <&tegra_car 108>, /* dam0 */
+ <&tegra_car 109>, /* dam1 */
+ <&tegra_car 110>, /* dam2 */
+ <&tegra_car 10>, /* spdif */
+ <&tegra_car 153>, /* amx */
+ <&tegra_car 185>, /* amx1 */
+ <&tegra_car 154>, /* adx */
+ <&tegra_car 180>, /* adx1 */
+ <&tegra_car 186>, /* afc0 */
+ <&tegra_car 187>, /* afc1 */
+ <&tegra_car 188>, /* afc2 */
+ <&tegra_car 189>, /* afc3 */
+ <&tegra_car 190>, /* afc4 */
+ <&tegra_car 191>; /* afc5 */
+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ "i2s3", "i2s4", "dam0", "dam1", "dam2",
+ "spdif", "amx", "amx1", "adx", "adx1",
+ "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+ dmas = <&apbdma 1>, <&apbdma 1>,
+ <&apbdma 2>, <&apbdma 2>,
+ <&apbdma 3>, <&apbdma 3>,
+ <&apbdma 4>, <&apbdma 4>,
+ <&apbdma 6>, <&apbdma 6>,
+ <&apbdma 7>, <&apbdma 7>,
+ <&apbdma 12>, <&apbdma 12>,
+ <&apbdma 13>, <&apbdma 13>,
+ <&apbdma 14>, <&apbdma 14>,
+ <&apbdma 29>, <&apbdma 29>;
+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+ "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+ "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+ "rx9", "tx9";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tegra_i2s0: i2s@70301000 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301000 0x100>;
+ nvidia,ahub-cif-ids = <4 4>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+ resets = <&tegra_car 30>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@70301100 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301100 0x100>;
+ nvidia,ahub-cif-ids = <5 5>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@70301200 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301200 0x100>;
+ nvidia,ahub-cif-ids = <6 6>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+ resets = <&tegra_car 18>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s3: i2s@70301300 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301300 0x100>;
+ nvidia,ahub-cif-ids = <7 7>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+ resets = <&tegra_car 101>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s4: i2s@70301400 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301400 0x100>;
+ nvidia,ahub-cif-ids = <8 8>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+ resets = <&tegra_car 102>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
};
cpus {
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index d5c9bca..61bc393 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -4,12 +4,17 @@
model = "Toradex Colibri T20 512MB";
compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x20000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
@@ -19,7 +24,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -27,20 +32,20 @@
audio_refclk {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
crt {
nvidia,pins = "crtp";
nvidia,function = "crt";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
displaya {
nvidia,pins = "ld0", "ld1", "ld2", "ld3",
@@ -50,155 +55,163 @@
"lhs", "lpw0", "lpw2", "lsc0",
"lsc1", "lsck", "lsda", "lspi", "lvs";
nvidia,function = "displaya";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
gpio_dte {
nvidia,pins = "dte";
nvidia,function = "rsvd1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
gpio_gmi {
nvidia,pins = "ata", "atc", "atd", "ate",
"dap1", "dap2", "dap4", "gpu", "irrx",
"irtx", "spia", "spib", "spic";
nvidia,function = "gmi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
gpio_pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
gpio_uac {
nvidia,pins = "uac";
nvidia,function = "rsvd2";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
hdint {
nvidia,pins = "hdint";
nvidia,function = "hdmi";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
i2c1 {
nvidia,pins = "rm";
nvidia,function = "i2c1";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
i2c3 {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
i2cddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
irda {
nvidia,pins = "uad";
nvidia,function = "irda";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
nand {
nvidia,pins = "kbca", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "nand";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
owc {
nvidia,pins = "owc";
nvidia,function = "owr";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
pwm {
nvidia,pins = "sdb", "sdc", "sdd";
nvidia,function = "pwm";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
sdio4 {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
spi1 {
nvidia,pins = "spid", "spie", "spif";
nvidia,function = "spi1";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
spi4 {
nvidia,pins = "slxa", "slxc", "slxd", "slxk";
nvidia,function = "spi4";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
uarta {
nvidia,pins = "sdio1";
nvidia,function = "uarta";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
uartd {
nvidia,pins = "gmc";
nvidia,function = "uartd";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
ulpi {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
ulpi_refclk {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
usb_gpio {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
vi {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,function = "vi";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
vi_sc {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
};
};
+ ac97: ac97@70002000 {
+ status = "okay";
+ nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
+ GPIO_ACTIVE_HIGH>;
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
};
@@ -225,15 +238,15 @@
#gpio-cells = <2>;
gpio-controller;
- sys-supply = <&vdd_5v0_reg>;
+ sys-supply = <&vdd_3v3_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
vin-sm2-supply = <&sys_reg>;
vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&sm2_reg>;
- vinldo4-supply = <&sm2_reg>;
- vinldo678-supply = <&sm2_reg>;
- vinldo9-supply = <&sm2_reg>;
+ vinldo23-supply = <&vdd_3v3_reg>;
+ vinldo4-supply = <&vdd_3v3_reg>;
+ vinldo678-supply = <&vdd_3v3_reg>;
+ vinldo9-supply = <&vdd_3v3_reg>;
regulators {
#address-cells = <1>;
@@ -250,8 +263,8 @@
reg = <1>;
regulator-compatible = "sm0";
regulator-name = "vdd_sm0,vdd_core";
- regulator-min-microvolt = <1275000>;
- regulator-max-microvolt = <1275000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
};
@@ -259,8 +272,8 @@
reg = <2>;
regulator-compatible = "sm1";
regulator-name = "vdd_sm1,vdd_cpu";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
};
@@ -316,8 +329,8 @@
reg = <10>;
regulator-compatible = "ldo6";
regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
};
hdmi_vdd_reg: regulator@11 {
@@ -362,7 +375,7 @@
};
};
- pmc {
+ pmc@7000e400 {
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
@@ -442,14 +455,6 @@
};
};
- ac97: ac97 {
- status = "okay";
- nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
- GPIO_ACTIVE_HIGH>;
- nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
- GPIO_ACTIVE_HIGH>;
- };
-
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
@@ -471,7 +476,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -479,6 +484,33 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_3v3_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "internal_usb";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
"nvidia,tegra-audio-wm9712";
@@ -498,31 +530,4 @@
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_5v0_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "internal_usb";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
- };
- };
};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index e156ab3..3fb1f50 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -1,17 +1,31 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Harmony evaluation board";
compatible = "nvidia,harmony", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x40000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&panel>;
+ };
+ };
+
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
@@ -23,7 +37,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -184,50 +198,50 @@
"gmb", "gmc", "gmd", "gme", "gpu7",
"gpv", "i2cp", "pta", "rm", "slxa",
"slxk", "spia", "spib", "uac";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_csus {
nvidia,pins = "csus", "spid", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
"dtc", "dte", "dtf", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
"uda";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ddc {
nvidia,pins = "ddc", "dta", "dtd", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
"sdc";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "owc", "sdb";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_irrx {
nvidia,pins = "irrx", "irtx", "sdd", "spic",
"spie", "spih", "uaa", "uab", "uad",
"uca", "ucb";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
@@ -237,12 +251,12 @@
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "pmc";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
};
};
@@ -255,6 +269,10 @@
status = "okay";
};
+ pwm: pwm@7000a000 {
+ status = "okay";
+ };
+
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
@@ -415,7 +433,124 @@
};
};
- pmc {
+ kbc@7000e200 {
+ status = "okay";
+ nvidia,debounce-delay-ms = <2>;
+ nvidia,repeat-delay-ms = <160>;
+ nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+ nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+ linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+ MATRIX_KEY(0x00, 0x03, KEY_S)
+ MATRIX_KEY(0x00, 0x04, KEY_A)
+ MATRIX_KEY(0x00, 0x05, KEY_Z)
+ MATRIX_KEY(0x00, 0x07, KEY_FN)
+ MATRIX_KEY(0x01, 0x07, KEY_MENU)
+ MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
+ MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
+ MATRIX_KEY(0x03, 0x00, KEY_5)
+ MATRIX_KEY(0x03, 0x01, KEY_4)
+ MATRIX_KEY(0x03, 0x02, KEY_R)
+ MATRIX_KEY(0x03, 0x03, KEY_E)
+ MATRIX_KEY(0x03, 0x04, KEY_F)
+ MATRIX_KEY(0x03, 0x05, KEY_D)
+ MATRIX_KEY(0x03, 0x06, KEY_X)
+ MATRIX_KEY(0x04, 0x00, KEY_7)
+ MATRIX_KEY(0x04, 0x01, KEY_6)
+ MATRIX_KEY(0x04, 0x02, KEY_T)
+ MATRIX_KEY(0x04, 0x03, KEY_H)
+ MATRIX_KEY(0x04, 0x04, KEY_G)
+ MATRIX_KEY(0x04, 0x05, KEY_V)
+ MATRIX_KEY(0x04, 0x06, KEY_C)
+ MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+ MATRIX_KEY(0x05, 0x00, KEY_9)
+ MATRIX_KEY(0x05, 0x01, KEY_8)
+ MATRIX_KEY(0x05, 0x02, KEY_U)
+ MATRIX_KEY(0x05, 0x03, KEY_Y)
+ MATRIX_KEY(0x05, 0x04, KEY_J)
+ MATRIX_KEY(0x05, 0x05, KEY_N)
+ MATRIX_KEY(0x05, 0x06, KEY_B)
+ MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+ MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+ MATRIX_KEY(0x06, 0x01, KEY_0)
+ MATRIX_KEY(0x06, 0x02, KEY_O)
+ MATRIX_KEY(0x06, 0x03, KEY_I)
+ MATRIX_KEY(0x06, 0x04, KEY_L)
+ MATRIX_KEY(0x06, 0x05, KEY_K)
+ MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+ MATRIX_KEY(0x06, 0x07, KEY_M)
+ MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+ MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+ MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+ MATRIX_KEY(0x07, 0x07, KEY_MENU)
+ MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
+ MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
+ MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
+ MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+ MATRIX_KEY(0x0B, 0x01, KEY_P)
+ MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+ MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+ MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+ MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+ MATRIX_KEY(0x0C, 0x00, KEY_F10)
+ MATRIX_KEY(0x0C, 0x01, KEY_F9)
+ MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+ MATRIX_KEY(0x0C, 0x03, KEY_3)
+ MATRIX_KEY(0x0C, 0x04, KEY_2)
+ MATRIX_KEY(0x0C, 0x05, KEY_UP)
+ MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+ MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+ MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+ MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+ MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+ MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+ MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+ MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+ MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+ MATRIX_KEY(0x0E, 0x00, KEY_F11)
+ MATRIX_KEY(0x0E, 0x01, KEY_F12)
+ MATRIX_KEY(0x0E, 0x02, KEY_F8)
+ MATRIX_KEY(0x0E, 0x03, KEY_Q)
+ MATRIX_KEY(0x0E, 0x04, KEY_F4)
+ MATRIX_KEY(0x0E, 0x05, KEY_F3)
+ MATRIX_KEY(0x0E, 0x06, KEY_1)
+ MATRIX_KEY(0x0E, 0x07, KEY_F7)
+ MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+ MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+ MATRIX_KEY(0x0F, 0x02, KEY_F5)
+ MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+ MATRIX_KEY(0x0F, 0x04, KEY_F1)
+ MATRIX_KEY(0x0F, 0x05, KEY_F2)
+ MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+ MATRIX_KEY(0x0F, 0x07, KEY_F6)
+ MATRIX_KEY(0x14, 0x00, KEY_KP7)
+ MATRIX_KEY(0x15, 0x00, KEY_KP9)
+ MATRIX_KEY(0x15, 0x01, KEY_KP8)
+ MATRIX_KEY(0x15, 0x02, KEY_KP4)
+ MATRIX_KEY(0x15, 0x04, KEY_KP1)
+ MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+ MATRIX_KEY(0x16, 0x02, KEY_KP6)
+ MATRIX_KEY(0x16, 0x03, KEY_KP5)
+ MATRIX_KEY(0x16, 0x04, KEY_KP3)
+ MATRIX_KEY(0x16, 0x05, KEY_KP2)
+ MATRIX_KEY(0x16, 0x07, KEY_KP0)
+ MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+ MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+ MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+ MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+ MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+ MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+ MATRIX_KEY(0x1D, 0x04, KEY_END)
+ MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+ MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+ MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+ MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
+ };
+
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
@@ -425,7 +560,7 @@
nvidia,sys-clock-req-active-high;
};
- pcie-controller {
+ pcie-controller@80003000 {
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
status = "okay";
@@ -483,12 +618,23 @@
bus-width = <8>;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_bl_reg>;
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -502,126 +648,18 @@
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
};
- kbc {
- status = "okay";
- nvidia,debounce-delay-ms = <2>;
- nvidia,repeat-delay-ms = <160>;
- nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
- nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
- linux,keymap = <0x00020011 /* KEY_W */
- 0x0003001F /* KEY_S */
- 0x0004001E /* KEY_A */
- 0x0005002C /* KEY_Z */
- 0x000701D0 /* KEY_FN */
- 0x0107008B /* KEY_MENU */
- 0x02060038 /* KEY_LEFTALT */
- 0x02070064 /* KEY_RIGHTALT */
- 0x03000006 /* KEY_5 */
- 0x03010005 /* KEY_4 */
- 0x03020013 /* KEY_R */
- 0x03030012 /* KEY_E */
- 0x03040021 /* KEY_F */
- 0x03050020 /* KEY_D */
- 0x0306002D /* KEY_X */
- 0x04000008 /* KEY_7 */
- 0x04010007 /* KEY_6 */
- 0x04020014 /* KEY_T */
- 0x04030023 /* KEY_H */
- 0x04040022 /* KEY_G */
- 0x0405002F /* KEY_V */
- 0x0406002E /* KEY_C */
- 0x04070039 /* KEY_SPACE */
- 0x0500000A /* KEY_9 */
- 0x05010009 /* KEY_8 */
- 0x05020016 /* KEY_U */
- 0x05030015 /* KEY_Y */
- 0x05040024 /* KEY_J */
- 0x05050031 /* KEY_N */
- 0x05060030 /* KEY_B */
- 0x0507002B /* KEY_BACKSLASH */
- 0x0600000C /* KEY_MINUS */
- 0x0601000B /* KEY_0 */
- 0x06020018 /* KEY_O */
- 0x06030017 /* KEY_I */
- 0x06040026 /* KEY_L */
- 0x06050025 /* KEY_K */
- 0x06060033 /* KEY_COMMA */
- 0x06070032 /* KEY_M */
- 0x0701000D /* KEY_EQUAL */
- 0x0702001B /* KEY_RIGHTBRACE */
- 0x0703001C /* KEY_ENTER */
- 0x0707008B /* KEY_MENU */
- 0x0804002A /* KEY_LEFTSHIFT */
- 0x08050036 /* KEY_RIGHTSHIFT */
- 0x0905001D /* KEY_LEFTCTRL */
- 0x09070061 /* KEY_RIGHTCTRL */
- 0x0B00001A /* KEY_LEFTBRACE */
- 0x0B010019 /* KEY_P */
- 0x0B020028 /* KEY_APOSTROPHE */
- 0x0B030027 /* KEY_SEMICOLON */
- 0x0B040035 /* KEY_SLASH */
- 0x0B050034 /* KEY_DOT */
- 0x0C000044 /* KEY_F10 */
- 0x0C010043 /* KEY_F9 */
- 0x0C02000E /* KEY_BACKSPACE */
- 0x0C030004 /* KEY_3 */
- 0x0C040003 /* KEY_2 */
- 0x0C050067 /* KEY_UP */
- 0x0C0600D2 /* KEY_PRINT */
- 0x0C070077 /* KEY_PAUSE */
- 0x0D00006E /* KEY_INSERT */
- 0x0D01006F /* KEY_DELETE */
- 0x0D030068 /* KEY_PAGEUP */
- 0x0D04006D /* KEY_PAGEDOWN */
- 0x0D05006A /* KEY_RIGHT */
- 0x0D06006C /* KEY_DOWN */
- 0x0D070069 /* KEY_LEFT */
- 0x0E000057 /* KEY_F11 */
- 0x0E010058 /* KEY_F12 */
- 0x0E020042 /* KEY_F8 */
- 0x0E030010 /* KEY_Q */
- 0x0E04003E /* KEY_F4 */
- 0x0E05003D /* KEY_F3 */
- 0x0E060002 /* KEY_1 */
- 0x0E070041 /* KEY_F7 */
- 0x0F000001 /* KEY_ESC */
- 0x0F010029 /* KEY_GRAVE */
- 0x0F02003F /* KEY_F5 */
- 0x0F03000F /* KEY_TAB */
- 0x0F04003B /* KEY_F1 */
- 0x0F05003C /* KEY_F2 */
- 0x0F06003A /* KEY_CAPSLOCK */
- 0x0F070040 /* KEY_F6 */
- 0x14000047 /* KEY_KP7 */
- 0x15000049 /* KEY_KP9 */
- 0x15010048 /* KEY_KP8 */
- 0x1502004B /* KEY_KP4 */
- 0x1504004F /* KEY_KP1 */
- 0x1601004E /* KEY_KPSLASH */
- 0x1602004D /* KEY_KP6 */
- 0x1603004C /* KEY_KP5 */
- 0x16040051 /* KEY_KP3 */
- 0x16050050 /* KEY_KP2 */
- 0x16070052 /* KEY_KP0 */
- 0x1B010037 /* KEY_KPASTERISK */
- 0x1B03004A /* KEY_KPMINUS */
- 0x1B04004E /* KEY_KPPLUS */
- 0x1B050053 /* KEY_KPDOT */
- 0x1C050073 /* KEY_VOLUMEUP */
- 0x1D030066 /* KEY_HOME */
- 0x1D04006B /* KEY_END */
- 0x1D0500E1 /* KEY_BRIGHTNESSUP */
- 0x1D060072 /* KEY_VOLUMEDOWN */
- 0x1D0700E0 /* KEY_BRIGHTNESSDOWN */
- 0x1E000045 /* KEY_NUMLOCK */
- 0x1E010046 /* KEY_SCROLLLOCK */
- 0x1E020071 /* KEY_MUTE */
- 0x1F0400D6>; /* KEY_QUESTION */
+ panel: panel {
+ compatible = "auo,b101aw03", "simple-panel";
+
+ power-supply = <&vdd_pnl_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
};
regulators {
@@ -667,7 +705,7 @@
enable-active-high;
};
- regulator@4 {
+ vdd_pnl_reg: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "vdd_pnl";
@@ -677,7 +715,7 @@
enable-active-high;
};
- regulator@5 {
+ vdd_bl_reg: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "vdd_bl";
diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts
index f2222bd..8cfb83f 100644
--- a/arch/arm/boot/dts/tegra20-iris-512.dts
+++ b/arch/arm/boot/dts/tegra20-iris-512.dts
@@ -6,36 +6,48 @@
model = "Toradex Colibri T20 512MB on Iris";
compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
};
};
- pinmux {
+ pinmux@70000014 {
state_default: pinmux {
hdint {
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
i2cddc {
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdio4 {
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uarta {
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uartd {
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
+ serial@70006000 {
+ status = "okay";
+ };
+
+ serial@70006300 {
+ status = "okay";
+ };
+
+ i2c_ddc: i2c@7000c400 {
+ status = "okay";
+ };
+
usb@c5000000 {
status = "okay";
};
@@ -52,18 +64,6 @@
status = "okay";
};
- serial@70006000 {
- status = "okay";
- };
-
- serial@70006300 {
- status = "okay";
- };
-
- i2c_ddc: i2c@7000c400 {
- status = "okay";
- };
-
sdhci@c8000600 {
status = "okay";
bus-width = <4>;
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index 7580578..6d3a4cb 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -6,7 +6,7 @@
model = "Avionic Design Medcom-Wide board";
compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
- pwm {
+ pwm@7000a000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 8d71fc9..c7cd8e6 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -1,17 +1,23 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "Toshiba AC100 / Dynabook AZ";
compatible = "compal,paz00", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x20000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
@@ -23,7 +29,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -177,39 +183,39 @@
"gpu", "gpu7", "gpv", "i2cp", "pta",
"rm", "sdio1", "slxk", "spdo", "uac",
"uda";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_crtp {
nvidia,pins = "crtp", "dap3", "dap4", "dtb",
"dtc", "dte", "slxa", "slxc", "slxd",
"spdi";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_csus {
nvidia,pins = "csus", "spia", "spib", "spid",
"spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ddc {
nvidia,pins = "ddc", "irrx", "irtx", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
"spic", "spig", "uaa", "uab";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_dta {
nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
"spie", "spih", "uad", "uca", "ucb";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "ld0", "ld1", "ld2",
@@ -218,23 +224,23 @@
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhs", "lsc0", "lspi",
"lvs", "pmc";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_lcsn {
nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
"lm0", "lm1", "lpp", "lpw0", "lpw1",
"lpw2", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "lvp1", "sdb";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
};
};
@@ -268,7 +274,7 @@
clock-frequency = <100000>;
};
- nvec {
+ nvec@7000c500 {
compatible = "nvidia,nvec";
reg = <0x7000c500 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -280,6 +286,8 @@
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 67>;
+ reset-names = "i2c";
};
i2c@7000d000 {
@@ -415,7 +423,7 @@
};
};
- pmc {
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
@@ -472,7 +480,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -486,7 +494,7 @@
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index d7a358a..29051a2 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -6,8 +6,8 @@
model = "Avionic Design Plutux board";
compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 315aae2..a11b6e7 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -1,17 +1,23 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "NVIDIA Seaboard";
compatible = "nvidia,seaboard", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x40000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
@@ -23,7 +29,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -189,53 +195,53 @@
"irtx", "pta", "rm", "sdc", "sdd",
"slxd", "slxk", "spdi", "spdo", "uac",
"uad", "uca", "ucb", "uda";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ate {
nvidia,pins = "ate", "csus", "dap3",
"gpv", "owc", "slxc", "spib", "spid",
"spie";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_crtp {
nvidia,pins = "crtp", "gmb", "slxa", "spia",
"spig", "spih";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_dte {
nvidia,pins = "dte", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf", "sdio1", "spic", "uaa",
"uab";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
@@ -245,22 +251,22 @@
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "pmc", "sdb";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
drive_sdio1 {
nvidia,pins = "drive_sdio1";
- nvidia,high-speed-mode = <0>;
- nvidia,schmitt = <0>;
- nvidia,low-power-mode = <3>;
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <31>;
nvidia,pull-up-strength = <31>;
- nvidia,slew-rate-rising = <3>;
- nvidia,slew-rate-falling = <3>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
};
};
@@ -386,6 +392,13 @@
status = "okay";
clock-frequency = <400000>;
+ magnetometer@c {
+ compatible = "ak,ak8975";
+ reg = <0xc>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
+ };
+
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
@@ -507,16 +520,149 @@
compatible = "onnn,nct1008";
reg = <0x4c>;
};
-
- magnetometer@c {
- compatible = "ak,ak8975";
- reg = <0xc>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
- };
};
- pmc {
+ kbc@7000e200 {
+ status = "okay";
+ nvidia,debounce-delay-ms = <32>;
+ nvidia,repeat-delay-ms = <160>;
+ nvidia,ghost-filter;
+ nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+ nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+ linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+ MATRIX_KEY(0x00, 0x03, KEY_S)
+ MATRIX_KEY(0x00, 0x04, KEY_A)
+ MATRIX_KEY(0x00, 0x05, KEY_Z)
+ MATRIX_KEY(0x00, 0x07, KEY_FN)
+
+ MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA)
+ MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT)
+ MATRIX_KEY(0x02, 0x07, KEY_LEFTALT)
+
+ MATRIX_KEY(0x03, 0x00, KEY_5)
+ MATRIX_KEY(0x03, 0x01, KEY_4)
+ MATRIX_KEY(0x03, 0x02, KEY_R)
+ MATRIX_KEY(0x03, 0x03, KEY_E)
+ MATRIX_KEY(0x03, 0x04, KEY_F)
+ MATRIX_KEY(0x03, 0x05, KEY_D)
+ MATRIX_KEY(0x03, 0x06, KEY_X)
+
+ MATRIX_KEY(0x04, 0x00, KEY_7)
+ MATRIX_KEY(0x04, 0x01, KEY_6)
+ MATRIX_KEY(0x04, 0x02, KEY_T)
+ MATRIX_KEY(0x04, 0x03, KEY_H)
+ MATRIX_KEY(0x04, 0x04, KEY_G)
+ MATRIX_KEY(0x04, 0x05, KEY_V)
+ MATRIX_KEY(0x04, 0x06, KEY_C)
+ MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+
+ MATRIX_KEY(0x05, 0x00, KEY_9)
+ MATRIX_KEY(0x05, 0x01, KEY_8)
+ MATRIX_KEY(0x05, 0x02, KEY_U)
+ MATRIX_KEY(0x05, 0x03, KEY_Y)
+ MATRIX_KEY(0x05, 0x04, KEY_J)
+ MATRIX_KEY(0x05, 0x05, KEY_N)
+ MATRIX_KEY(0x05, 0x06, KEY_B)
+ MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+
+ MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+ MATRIX_KEY(0x06, 0x01, KEY_0)
+ MATRIX_KEY(0x06, 0x02, KEY_O)
+ MATRIX_KEY(0x06, 0x03, KEY_I)
+ MATRIX_KEY(0x06, 0x04, KEY_L)
+ MATRIX_KEY(0x06, 0x05, KEY_K)
+ MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+ MATRIX_KEY(0x06, 0x07, KEY_M)
+
+ MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+ MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+ MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+ MATRIX_KEY(0x07, 0x07, KEY_MENU)
+
+ MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT)
+ MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT)
+
+ MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL)
+ MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL)
+
+ MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+ MATRIX_KEY(0x0B, 0x01, KEY_P)
+ MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+ MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+ MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+ MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+
+ MATRIX_KEY(0x0C, 0x00, KEY_F10)
+ MATRIX_KEY(0x0C, 0x01, KEY_F9)
+ MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+ MATRIX_KEY(0x0C, 0x03, KEY_3)
+ MATRIX_KEY(0x0C, 0x04, KEY_2)
+ MATRIX_KEY(0x0C, 0x05, KEY_UP)
+ MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+ MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+
+ MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+ MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+ MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+ MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+ MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+ MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+ MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+
+ MATRIX_KEY(0x0E, 0x00, KEY_F11)
+ MATRIX_KEY(0x0E, 0x01, KEY_F12)
+ MATRIX_KEY(0x0E, 0x02, KEY_F8)
+ MATRIX_KEY(0x0E, 0x03, KEY_Q)
+ MATRIX_KEY(0x0E, 0x04, KEY_F4)
+ MATRIX_KEY(0x0E, 0x05, KEY_F3)
+ MATRIX_KEY(0x0E, 0x06, KEY_1)
+ MATRIX_KEY(0x0E, 0x07, KEY_F7)
+
+ MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+ MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+ MATRIX_KEY(0x0F, 0x02, KEY_F5)
+ MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+ MATRIX_KEY(0x0F, 0x04, KEY_F1)
+ MATRIX_KEY(0x0F, 0x05, KEY_F2)
+ MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+ MATRIX_KEY(0x0F, 0x07, KEY_F6)
+
+ /* Software Handled Function Keys */
+ MATRIX_KEY(0x14, 0x00, KEY_KP7)
+
+ MATRIX_KEY(0x15, 0x00, KEY_KP9)
+ MATRIX_KEY(0x15, 0x01, KEY_KP8)
+ MATRIX_KEY(0x15, 0x02, KEY_KP4)
+ MATRIX_KEY(0x15, 0x04, KEY_KP1)
+
+ MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+ MATRIX_KEY(0x16, 0x02, KEY_KP6)
+ MATRIX_KEY(0x16, 0x03, KEY_KP5)
+ MATRIX_KEY(0x16, 0x04, KEY_KP3)
+ MATRIX_KEY(0x16, 0x05, KEY_KP2)
+ MATRIX_KEY(0x16, 0x07, KEY_KP0)
+
+ MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+ MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+ MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+ MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+
+ MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+
+ MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+ MATRIX_KEY(0x1D, 0x04, KEY_END)
+ MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP)
+
+ MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+ MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+ MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+
+ MATRIX_KEY(0x1F, 0x04, KEY_HELP)>;
+ };
+
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
@@ -621,7 +767,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -635,7 +781,7 @@
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
@@ -649,145 +795,6 @@
};
};
- kbc {
- status = "okay";
- nvidia,debounce-delay-ms = <32>;
- nvidia,repeat-delay-ms = <160>;
- nvidia,ghost-filter;
- nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
- nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
- linux,keymap = <0x00020011 /* KEY_W */
- 0x0003001F /* KEY_S */
- 0x0004001E /* KEY_A */
- 0x0005002C /* KEY_Z */
- 0x000701d0 /* KEY_FN */
-
- 0x0107007D /* KEY_LEFTMETA */
- 0x02060064 /* KEY_RIGHTALT */
- 0x02070038 /* KEY_LEFTALT */
-
- 0x03000006 /* KEY_5 */
- 0x03010005 /* KEY_4 */
- 0x03020013 /* KEY_R */
- 0x03030012 /* KEY_E */
- 0x03040021 /* KEY_F */
- 0x03050020 /* KEY_D */
- 0x0306002D /* KEY_X */
-
- 0x04000008 /* KEY_7 */
- 0x04010007 /* KEY_6 */
- 0x04020014 /* KEY_T */
- 0x04030023 /* KEY_H */
- 0x04040022 /* KEY_G */
- 0x0405002F /* KEY_V */
- 0x0406002E /* KEY_C */
- 0x04070039 /* KEY_SPACE */
-
- 0x0500000A /* KEY_9 */
- 0x05010009 /* KEY_8 */
- 0x05020016 /* KEY_U */
- 0x05030015 /* KEY_Y */
- 0x05040024 /* KEY_J */
- 0x05050031 /* KEY_N */
- 0x05060030 /* KEY_B */
- 0x0507002B /* KEY_BACKSLASH */
-
- 0x0600000C /* KEY_MINUS */
- 0x0601000B /* KEY_0 */
- 0x06020018 /* KEY_O */
- 0x06030017 /* KEY_I */
- 0x06040026 /* KEY_L */
- 0x06050025 /* KEY_K */
- 0x06060033 /* KEY_COMMA */
- 0x06070032 /* KEY_M */
-
- 0x0701000D /* KEY_EQUAL */
- 0x0702001B /* KEY_RIGHTBRACE */
- 0x0703001C /* KEY_ENTER */
- 0x0707008B /* KEY_MENU */
-
- 0x08040036 /* KEY_RIGHTSHIFT */
- 0x0805002A /* KEY_LEFTSHIFT */
-
- 0x09050061 /* KEY_RIGHTCTRL */
- 0x0907001D /* KEY_LEFTCTRL */
-
- 0x0B00001A /* KEY_LEFTBRACE */
- 0x0B010019 /* KEY_P */
- 0x0B020028 /* KEY_APOSTROPHE */
- 0x0B030027 /* KEY_SEMICOLON */
- 0x0B040035 /* KEY_SLASH */
- 0x0B050034 /* KEY_DOT */
-
- 0x0C000044 /* KEY_F10 */
- 0x0C010043 /* KEY_F9 */
- 0x0C02000E /* KEY_BACKSPACE */
- 0x0C030004 /* KEY_3 */
- 0x0C040003 /* KEY_2 */
- 0x0C050067 /* KEY_UP */
- 0x0C0600D2 /* KEY_PRINT */
- 0x0C070077 /* KEY_PAUSE */
-
- 0x0D00006E /* KEY_INSERT */
- 0x0D01006F /* KEY_DELETE */
- 0x0D030068 /* KEY_PAGEUP */
- 0x0D04006D /* KEY_PAGEDOWN */
- 0x0D05006A /* KEY_RIGHT */
- 0x0D06006C /* KEY_DOWN */
- 0x0D070069 /* KEY_LEFT */
-
- 0x0E000057 /* KEY_F11 */
- 0x0E010058 /* KEY_F12 */
- 0x0E020042 /* KEY_F8 */
- 0x0E030010 /* KEY_Q */
- 0x0E04003E /* KEY_F4 */
- 0x0E05003D /* KEY_F3 */
- 0x0E060002 /* KEY_1 */
- 0x0E070041 /* KEY_F7 */
-
- 0x0F000001 /* KEY_ESC */
- 0x0F010029 /* KEY_GRAVE */
- 0x0F02003F /* KEY_F5 */
- 0x0F03000F /* KEY_TAB */
- 0x0F04003B /* KEY_F1 */
- 0x0F05003C /* KEY_F2 */
- 0x0F06003A /* KEY_CAPSLOCK */
- 0x0F070040 /* KEY_F6 */
-
- /* Software Handled Function Keys */
- 0x14000047 /* KEY_KP7 */
-
- 0x15000049 /* KEY_KP9 */
- 0x15010048 /* KEY_KP8 */
- 0x1502004B /* KEY_KP4 */
- 0x1504004F /* KEY_KP1 */
-
- 0x1601004E /* KEY_KPSLASH */
- 0x1602004D /* KEY_KP6 */
- 0x1603004C /* KEY_KP5 */
- 0x16040051 /* KEY_KP3 */
- 0x16050050 /* KEY_KP2 */
- 0x16070052 /* KEY_KP0 */
-
- 0x1B010037 /* KEY_KPASTERISK */
- 0x1B03004A /* KEY_KPMINUS */
- 0x1B04004E /* KEY_KPPLUS */
- 0x1B050053 /* KEY_KPDOT */
-
- 0x1C050073 /* KEY_VOLUMEUP */
-
- 0x1D030066 /* KEY_HOME */
- 0x1D04006B /* KEY_END */
- 0x1D0500E0 /* KEY_BRIGHTNESSDOWN */
- 0x1D060072 /* KEY_VOLUMEDOWN */
- 0x1D0700E1 /* KEY_BRIGHTNESSUP */
-
- 0x1E000045 /* KEY_NUMLOCK */
- 0x1E010046 /* KEY_SCROLLLOCK */
- 0x1E020071 /* KEY_MUTE */
-
- 0x1F04008A>; /* KEY_HELP */
- };
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 7726dab..a1b0d96 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -4,12 +4,17 @@
model = "Avionic Design Tamonten SOM";
compatible = "ad,tamonten", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x20000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
@@ -19,7 +24,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -176,50 +181,50 @@
"gmb", "gmc", "gmd", "gme", "gpu7",
"gpv", "i2cp", "pta", "rm", "slxa",
"slxk", "spia", "spib", "uac";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_csus {
nvidia,pins = "csus", "spid", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
"dtc", "dte", "dtf", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
"uda";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ddc {
nvidia,pins = "ddc", "dta", "dtd", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
"sdc";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "owc", "sdb";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_irrx {
nvidia,pins = "irrx", "irtx", "sdd", "spic",
"spie", "spih", "uaa", "uab", "uad",
"uca", "ucb";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
@@ -229,12 +234,12 @@
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "pmc";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
};
@@ -457,7 +462,7 @@
};
};
- pmc {
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
@@ -467,7 +472,7 @@
nvidia,sys-clock-req-active-high;
};
- pcie-controller {
+ pcie-controller@80003000 {
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
};
@@ -492,7 +497,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 3ada3cb..890562c 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -6,8 +6,8 @@
model = "Avionic Design Tamonten Evaluation Carrier";
compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
};
};
@@ -32,7 +32,7 @@
};
};
- pcie-controller {
+ pcie-controller@80003000 {
status = "okay";
pci@1,0 {
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 78deea5..216fa6d 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -1,17 +1,23 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "Compulab TrimSlice board";
compatible = "compulab,trimslice", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000c500/rtc@56";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x40000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
@@ -23,7 +29,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -191,49 +197,49 @@
"dtb", "dtc", "dtd", "dte", "gmb",
"gme", "i2cp", "pta", "slxc", "slxd",
"spdi", "spdo", "uda";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_atb {
nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
"gma", "gmc", "gmd", "gpu", "gpu7",
"gpv", "sdio1", "slxa", "slxk", "uac";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_csus {
nvidia,pins = "csus", "spia", "spib",
"spid", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ddc {
nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "pmc";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_irrx {
nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
"kbcc", "kbcd", "kbce", "kbcf", "owc",
"spic", "spie", "spig", "spih", "uaa",
"uab", "uad", "uca", "ucb";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
@@ -243,17 +249,17 @@
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "sdb";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
conf_spif {
nvidia,pins = "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
@@ -301,7 +307,7 @@
};
};
- pmc {
+ pmc@7000e400 {
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
@@ -310,7 +316,7 @@
nvidia,sys-clock-req-active-high;
};
- pcie-controller {
+ pcie-controller@80003000 {
status = "okay";
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
@@ -366,7 +372,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -380,7 +386,7 @@
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index aab872c..571d12e 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -1,17 +1,23 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Ventana evaluation board";
compatible = "nvidia,ventana", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x40000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
@@ -23,7 +29,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -189,50 +195,50 @@
"irtx", "pta", "rm", "sdc", "sdd",
"slxc", "slxd", "slxk", "spdi", "spdo",
"uac", "uad", "uca", "ucb", "uda";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ate {
nvidia,pins = "ate", "csus", "dap3", "gmd",
"gpv", "owc", "spia", "spib", "spic",
"spid", "spie", "spig";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_crtp {
nvidia,pins = "crtp", "gmb", "slxa", "spih";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_dte {
nvidia,pins = "dte", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsck", "lsda", "lsdi", "lvp0";
- nvidia,tristate = <1>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf", "sdio1", "uaa", "uab";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_lc {
nvidia,pins = "lc", "ls";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
@@ -242,22 +248,22 @@
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
"lvp1", "lvs", "pmc", "sdb";
- nvidia,tristate = <0>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
drive_sdio1 {
nvidia,pins = "drive_sdio1";
- nvidia,high-speed-mode = <0>;
- nvidia,schmitt = <1>;
- nvidia,low-power-mode = <3>;
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <31>;
nvidia,pull-up-strength = <31>;
- nvidia,slew-rate-rising = <3>;
- nvidia,slew-rate-falling = <3>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
};
};
@@ -492,7 +498,7 @@
};
};
- pmc {
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
@@ -556,7 +562,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -570,7 +576,7 @@
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- linux,code = <116>; /* KEY_POWER */
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
};
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index d33a73cf..1843725 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -1,17 +1,23 @@
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20.dtsi"
/ {
model = "NVIDIA Tegra20 Whistler evaluation board";
compatible = "nvidia,whistler", "nvidia,tegra20";
+ aliases {
+ rtc0 = "/i2c@7000d000/max8907@3c";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x00000000 0x20000000>;
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
@@ -23,7 +29,7 @@
};
};
- pinmux {
+ pinmux@70000014 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -189,8 +195,8 @@
"kbcf", "sdc", "sdd", "spie", "spig",
"spih", "uaa", "uab", "uad", "uca",
"ucb";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_atd {
nvidia,pins = "atd", "ate", "cdev1", "csus",
@@ -198,54 +204,54 @@
"dtf", "gpu", "gpu7", "gpv", "i2cp",
"rm", "sdio1", "slxa", "slxc", "slxd",
"slxk", "spdi", "spdo", "uac", "uda";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_cdev2 {
nvidia,pins = "cdev2", "spia", "spib";
- nvidia,pull = <1>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "lc", "pmca",
"pmcb", "pmcc", "pmcd", "xm2c",
"xm2d";
- nvidia,pull = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
conf_crtp {
nvidia,pins = "crtp";
- nvidia,pull = <0>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd",
"spid", "spif";
- nvidia,pull = <1>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
conf_gme {
nvidia,pins = "gme", "owc", "pta", "spic";
- nvidia,pull = <2>;
- nvidia,tristate = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
- nvidia,pull = <1>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
conf_ls {
nvidia,pins = "ls", "pmce";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
drive_dap1 {
nvidia,pins = "drive_dap1";
- nvidia,high-speed-mode = <0>;
- nvidia,schmitt = <1>;
- nvidia,low-power-mode = <0>;
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+ nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_8>;
nvidia,pull-down-strength = <0>;
nvidia,pull-up-strength = <0>;
- nvidia,slew-rate-rising = <0>;
- nvidia,slew-rate-falling = <0>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
};
};
};
@@ -495,7 +501,20 @@
};
};
- pmc {
+ kbc@7000e200 {
+ status = "okay";
+ nvidia,debounce-delay-ms = <20>;
+ nvidia,repeat-delay-ms = <160>;
+ nvidia,kbc-row-pins = <0 1 2>;
+ nvidia,kbc-col-pins = <16 17>;
+ nvidia,wakeup-source;
+ linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER)
+ MATRIX_KEY(0x01, 0x00, KEY_HOME)
+ MATRIX_KEY(0x01, 0x01, KEY_BACK)
+ MATRIX_KEY(0x02, 0x01, KEY_MENU)>;
+ };
+
+ pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
@@ -543,7 +562,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -551,25 +570,12 @@
};
};
- kbc {
- status = "okay";
- nvidia,debounce-delay-ms = <20>;
- nvidia,repeat-delay-ms = <160>;
- nvidia,kbc-row-pins = <0 1 2>;
- nvidia,kbc-col-pins = <16 17>;
- nvidia,wakeup-source;
- linux,keymap = <0x00000074 /* KEY_POWER */
- 0x01000066 /* KEY_HOME */
- 0x0101009E /* KEY_BACK */
- 0x0201008B>; /* KEY_MENU */
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
- usb0_vbus_reg: regulator {
+ usb0_vbus_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb0_vbus";
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index df40b54..480ecda 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -1,5 +1,6 @@
#include <dt-bindings/clock/tegra20-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -16,57 +17,71 @@
serial4 = &uarte;
};
- host1x {
+ host1x@50000000 {
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+ resets = <&tegra_car 28>;
+ reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x54000000 0x54000000 0x04000000>;
- mpe {
+ mpe@54040000 {
compatible = "nvidia,tegra20-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_MPE>;
+ resets = <&tegra_car 60>;
+ reset-names = "mpe";
};
- vi {
+ vi@54080000 {
compatible = "nvidia,tegra20-vi";
reg = <0x54080000 0x00040000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_VI>;
+ resets = <&tegra_car 20>;
+ reset-names = "vi";
};
- epp {
+ epp@540c0000 {
compatible = "nvidia,tegra20-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_EPP>;
+ resets = <&tegra_car 19>;
+ reset-names = "epp";
};
- isp {
+ isp@54100000 {
compatible = "nvidia,tegra20-isp";
reg = <0x54100000 0x00040000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_ISP>;
+ resets = <&tegra_car 23>;
+ reset-names = "isp";
};
- gr2d {
+ gr2d@54140000 {
compatible = "nvidia,tegra20-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+ resets = <&tegra_car 21>;
+ reset-names = "2d";
};
- gr3d {
+ gr3d@54140000 {
compatible = "nvidia,tegra20-gr3d";
- reg = <0x54180000 0x00040000>;
+ reg = <0x54140000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+ resets = <&tegra_car 24>;
+ reset-names = "3d";
};
dc@54200000 {
@@ -75,7 +90,9 @@
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_DISP1>,
<&tegra_car TEGRA20_CLK_PLL_P>;
- clock-names = "disp1", "parent";
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
rgb {
status = "disabled";
@@ -88,24 +105,28 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_DISP2>,
<&tegra_car TEGRA20_CLK_PLL_P>;
- clock-names = "disp2", "parent";
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 26>;
+ reset-names = "dc";
rgb {
status = "disabled";
};
};
- hdmi {
+ hdmi@54280000 {
compatible = "nvidia,tegra20-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_HDMI>,
<&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
status = "disabled";
};
- tvo {
+ tvo@542c0000 {
compatible = "nvidia,tegra20-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -113,10 +134,12 @@
status = "disabled";
};
- dsi {
+ dsi@542c0000 {
compatible = "nvidia,tegra20-dsi";
- reg = <0x54300000 0x00040000>;
+ reg = <0x542c0000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_DSI>;
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
status = "disabled";
};
};
@@ -129,7 +152,7 @@
clocks = <&tegra_car TEGRA20_CLK_TWD>;
};
- intc: interrupt-controller {
+ intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
0x50040100 0x0100>;
@@ -137,7 +160,7 @@
#interrupt-cells = <3>;
};
- cache-controller {
+ cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <5 5 2>;
@@ -156,13 +179,14 @@
clocks = <&tegra_car TEGRA20_CLK_TIMER>;
};
- tegra_car: clock {
+ tegra_car: clock@60006000 {
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
- apbdma: dma {
+ apbdma: dma@6000a000 {
compatible = "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1200>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -182,14 +206,17 @@
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
};
- ahb {
+ ahb@6000c004 {
compatible = "nvidia,tegra20-ahb";
reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
};
- gpio: gpio {
+ gpio: gpio@6000d000 {
compatible = "nvidia,tegra20-gpio";
reg = <0x6000d000 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -205,7 +232,7 @@
interrupt-controller;
};
- pinmux: pinmux {
+ pinmux: pinmux@70000014 {
compatible = "nvidia,tegra20-pinmux";
reg = <0x70000014 0x10 /* Tri-state registers */
0x70000080 0x20 /* Mux registers */
@@ -213,17 +240,20 @@
0x70000868 0xa8>; /* Pad control registers */
};
- das {
+ das@70000c00 {
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
- tegra_ac97: ac97 {
+ tegra_ac97: ac97@70002000 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 12>;
clocks = <&tegra_car TEGRA20_CLK_AC97>;
+ resets = <&tegra_car 3>;
+ reset-names = "ac97";
+ dmas = <&apbdma 12>, <&apbdma 12>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -231,8 +261,11 @@
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 2>;
clocks = <&tegra_car TEGRA20_CLK_I2S1>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
+ dmas = <&apbdma 2>, <&apbdma 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -240,8 +273,11 @@
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car TEGRA20_CLK_I2S2>;
+ resets = <&tegra_car 18>;
+ reset-names = "i2s";
+ dmas = <&apbdma 1>, <&apbdma 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -257,8 +293,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car TEGRA20_CLK_UARTA>;
+ resets = <&tegra_car 6>;
+ reset-names = "serial";
+ dmas = <&apbdma 8>, <&apbdma 8>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -267,8 +306,11 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car TEGRA20_CLK_UARTB>;
+ resets = <&tegra_car 7>;
+ reset-names = "serial";
+ dmas = <&apbdma 9>, <&apbdma 9>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -277,8 +319,11 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car TEGRA20_CLK_UARTC>;
+ resets = <&tegra_car 55>;
+ reset-names = "serial";
+ dmas = <&apbdma 10>, <&apbdma 10>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -287,8 +332,11 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car TEGRA20_CLK_UARTD>;
+ resets = <&tegra_car 65>;
+ reset-names = "serial";
+ dmas = <&apbdma 19>, <&apbdma 19>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -297,20 +345,25 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car TEGRA20_CLK_UARTE>;
+ resets = <&tegra_car 66>;
+ reset-names = "serial";
+ dmas = <&apbdma 20>, <&apbdma 20>;
+ dma-names = "rx", "tx";
status = "disabled";
};
- pwm: pwm {
+ pwm: pwm@7000a000 {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA20_CLK_PWM>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
status = "disabled";
};
- rtc {
+ rtc@7000e000 {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -326,6 +379,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C1>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 12>;
+ reset-names = "i2c";
+ dmas = <&apbdma 21>, <&apbdma 21>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -333,10 +390,13 @@
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 11>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SPI>;
+ resets = <&tegra_car 43>;
+ reset-names = "spi";
+ dmas = <&apbdma 11>, <&apbdma 11>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -349,6 +409,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C2>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 54>;
+ reset-names = "i2c";
+ dmas = <&apbdma 22>, <&apbdma 22>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -361,6 +425,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 67>;
+ reset-names = "i2c";
+ dmas = <&apbdma 23>, <&apbdma 23>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -373,6 +441,10 @@
clocks = <&tegra_car TEGRA20_CLK_DVC>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 47>;
+ reset-names = "i2c";
+ dmas = <&apbdma 24>, <&apbdma 24>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -380,10 +452,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC1>;
+ resets = <&tegra_car 41>;
+ reset-names = "spi";
+ dmas = <&apbdma 15>, <&apbdma 15>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -391,10 +466,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+ resets = <&tegra_car 44>;
+ reset-names = "spi";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -402,10 +480,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC3>;
+ resets = <&tegra_car 46>;
+ reset-names = "spi";
+ dmas = <&apbdma 17>, <&apbdma 17>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -413,22 +494,27 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC4>;
+ resets = <&tegra_car 68>;
+ reset-names = "spi";
+ dmas = <&apbdma 18>, <&apbdma 18>;
+ dma-names = "rx", "tx";
status = "disabled";
};
- kbc {
+ kbc@7000e200 {
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_KBC>;
+ resets = <&tegra_car 36>;
+ reset-names = "kbc";
status = "disabled";
};
- pmc {
+ pmc@7000e400 {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
@@ -442,7 +528,7 @@
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
- iommu {
+ iommu@7000f024 {
compatible = "nvidia,tegra20-gart";
reg = <0x7000f024 0x00000018 /* controller registers */
0x58000000 0x02000000>; /* GART aperture */
@@ -455,7 +541,7 @@
#size-cells = <0>;
};
- pcie-controller {
+ pcie-controller@80003000 {
compatible = "nvidia,tegra20-pcie";
device_type = "pci";
reg = <0x80003000 0x00000800 /* PADS registers */
@@ -478,9 +564,12 @@
clocks = <&tegra_car TEGRA20_CLK_PEX>,
<&tegra_car TEGRA20_CLK_AFI>,
- <&tegra_car TEGRA20_CLK_PCIE_XCLK>,
<&tegra_car TEGRA20_CLK_PLL_E>;
- clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+ clock-names = "pex", "afi", "pll_e";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
@@ -517,6 +606,8 @@
phy_type = "utmi";
nvidia,has-legacy-mode;
clocks = <&tegra_car TEGRA20_CLK_USBD>;
+ resets = <&tegra_car 22>;
+ reset-names = "usb";
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
@@ -548,6 +639,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>;
+ resets = <&tegra_car 58>;
+ reset-names = "usb";
nvidia,phy = <&phy2>;
status = "disabled";
};
@@ -569,6 +662,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA20_CLK_USB3>;
+ resets = <&tegra_car 59>;
+ reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};
@@ -597,6 +692,8 @@
reg = <0xc8000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
status = "disabled";
};
@@ -605,6 +702,8 @@
reg = <0xc8000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
+ resets = <&tegra_car 9>;
+ reset-names = "sdhci";
status = "disabled";
};
@@ -613,6 +712,8 @@
reg = <0xc8000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
+ resets = <&tegra_car 69>;
+ reset-names = "sdhci";
status = "disabled";
};
@@ -621,6 +722,8 @@
reg = <0xc8000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
+ resets = <&tegra_car 15>;
+ reset-names = "sdhci";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 08cad69..e93fe45b 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -6,11 +6,16 @@
model = "NVIDIA Tegra30 Beaver evaluation board";
compatible = "nvidia,beaver", "nvidia,tegra30";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps65911@2d";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x80000000 0x7ff00000>;
};
- pcie-controller {
+ pcie-controller@00003000 {
status = "okay";
pex-clk-supply = <&sys_3v3_pexs_reg>;
vdd-supply = <&ldo1_reg>;
@@ -31,8 +36,8 @@
};
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&sys_3v3_reg>;
@@ -44,7 +49,7 @@
};
};
- pinmux {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -52,8 +57,8 @@
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
@@ -62,14 +67,14 @@
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
@@ -78,15 +83,15 @@
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
@@ -98,8 +103,8 @@
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
dap2_fs_pa2 {
nvidia,pins = "dap2_fs_pa2",
@@ -107,18 +112,18 @@
"dap2_din_pa4",
"dap2_dout_pa5";
nvidia,function = "i2s1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
pex_l1_prsnt_n_pdd4 {
nvidia,pins = "pex_l1_prsnt_n_pdd4",
"pex_l1_clkreq_n_pdd6";
- nvidia,pull = <2>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
sdio3 {
nvidia,pins = "drive_sdio3";
- nvidia,high-speed-mode = <0>;
- nvidia,schmitt = <0>;
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
nvidia,pull-down-strength = <46>;
nvidia,pull-up-strength = <42>;
nvidia,slew-rate-rising = <1>;
@@ -159,7 +164,7 @@
status = "okay";
clock-frequency = <100000>;
- rt5640: rt5640 {
+ rt5640: rt5640@1c {
compatible = "realtek,rt5640";
reg = <0x1c>;
interrupt-parent = <&gpio>;
@@ -168,19 +173,6 @@
<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
};
- tps62361 {
- compatible = "ti,tps62361";
- reg = <0x60>;
-
- regulator-name = "tps62361-vout";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- ti,vsel0-state-high;
- ti,vsel1-state-high;
- };
-
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
@@ -284,6 +276,19 @@
};
};
};
+
+ tps62361@60 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ };
};
spi@7000da00 {
@@ -296,13 +301,7 @@
};
};
- ahub {
- i2s@70080400 {
- status = "okay";
- };
- };
-
- pmc {
+ pmc@7000e400 {
status = "okay";
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
@@ -314,6 +313,12 @@
nvidia,sys-clock-req-active-high;
};
+ ahub@70080000 {
+ i2s@70080400 {
+ status = "okay";
+ };
+ };
+
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
@@ -328,6 +333,15 @@
non-removable;
};
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ phy2: usb-phy@7d004000 {
+ vbus-supply = <&sys_3v3_reg>;
+ status = "okay";
+ };
+
usb@7d008000 {
status = "okay";
};
@@ -342,7 +356,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -350,6 +364,19 @@
};
};
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ gpled1 {
+ label = "LED1"; /* CR5A1 (blue) */
+ gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+ };
+ gpled2 {
+ label = "LED2"; /* CR4A2 (green) */
+ gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -453,19 +480,6 @@
};
};
- gpio-leds {
- compatible = "gpio-leds";
-
- gpled1 {
- label = "LED1"; /* CR5A1 (blue) */
- gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
- };
- gpled2 {
- label = "LED2"; /* CR4A2 (green) */
- gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
- };
- };
-
sound {
compatible = "nvidia,tegra-audio-rt5640-beaver",
"nvidia,tegra-audio-rt5640";
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index 1082c5e..c9bfedc 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -8,6 +8,13 @@
model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+ sdhci@78000400 {
+ status = "okay";
+ power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -83,12 +90,5 @@
gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
};
};
-
- sdhci@78000400 {
- status = "okay";
- power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- keep-power-in-suspend;
- };
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index bf012bdd..fadf55e 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -8,6 +8,13 @@
model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+ sdhci@78000400 {
+ status = "okay";
+ power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ keep-power-in-suspend;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -95,11 +102,4 @@
gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
};
};
-
- sdhci@78000400 {
- status = "okay";
- power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
- bus-width = <4>;
- keep-power-in-suspend;
- };
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 5ea7dfa..9104224 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -27,11 +27,16 @@
model = "NVIDIA Tegra30 Cardhu evaluation board";
compatible = "nvidia,cardhu", "nvidia,tegra30";
+ aliases {
+ rtc0 = "/i2c@7000d000/tps6586x@34";
+ rtc1 = "/rtc@7000e000";
+ };
+
memory {
reg = <0x80000000 0x40000000>;
};
- pcie-controller {
+ pcie-controller@00003000 {
status = "okay";
pex-clk-supply = <&pex_hvdd_3v3_reg>;
vdd-supply = <&ldo1_reg>;
@@ -51,7 +56,17 @@
};
};
- pinmux {
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&panel>;
+ };
+ };
+ };
+
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -59,8 +74,8 @@
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
@@ -69,14 +84,14 @@
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
@@ -85,15 +100,15 @@
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
@@ -105,8 +120,8 @@
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
- nvidia,pull = <2>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
dap2_fs_pa2 {
nvidia,pins = "dap2_fs_pa2",
@@ -114,17 +129,17 @@
"dap2_din_pa4",
"dap2_dout_pa5";
nvidia,function = "i2s1";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdio3 {
nvidia,pins = "drive_sdio3";
- nvidia,high-speed-mode = <0>;
- nvidia,schmitt = <0>;
+ nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
nvidia,pull-down-strength = <46>;
nvidia,pull-up-strength = <42>;
- nvidia,slew-rate-rising = <1>;
- nvidia,slew-rate-falling = <1>;
+ nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+ nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
};
uart3_txd_pw6 {
nvidia,pins = "uart3_txd_pw6",
@@ -132,8 +147,8 @@
"uart3_rts_n_pc0",
"uart3_rxd_pw7";
nvidia,function = "uartc";
- nvidia,pull = <0>;
- nvidia,tristate = <0>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
@@ -147,7 +162,11 @@
status = "okay";
};
- i2c@7000c000 {
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ panelddc: i2c@7000c000 {
status = "okay";
clock-frequency = <100000>;
};
@@ -302,7 +321,7 @@
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
};
- tps62361 {
+ tps62361@60 {
compatible = "ti,tps62361";
reg = <0x60>;
@@ -326,13 +345,7 @@
};
};
- ahub {
- i2s@70080400 {
- status = "okay";
- };
- };
-
- pmc {
+ pmc@7000e400 {
status = "okay";
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
@@ -344,6 +357,12 @@
nvidia,sys-clock-req-active-high;
};
+ ahub@70080000 {
+ i2s@70080400 {
+ status = "okay";
+ };
+ };
+
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
@@ -367,12 +386,23 @@
status = "okay";
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_bl_reg>;
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
@@ -380,6 +410,16 @@
};
};
+ panel: panel {
+ compatible = "chunghwa,claa101wb01", "simple-panel";
+ ddc-i2c-bus = <&panelddc>;
+
+ power-supply = <&vdd_pnl1_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 2bd55cf..ed8e770 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -1,5 +1,6 @@
#include <dt-bindings/clock/tegra30-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -16,7 +17,7 @@
serial4 = &uarte;
};
- pcie-controller {
+ pcie-controller@00003000 {
compatible = "nvidia,tegra30-pcie";
device_type = "pci";
reg = <0x00003000 0x00000800 /* PADS registers */
@@ -40,10 +41,13 @@
clocks = <&tegra_car TEGRA30_CLK_PCIE>,
<&tegra_car TEGRA30_CLK_AFI>,
- <&tegra_car TEGRA30_CLK_PCIEX>,
<&tegra_car TEGRA30_CLK_PLL_E>,
<&tegra_car TEGRA30_CLK_CML0>;
- clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
+ clock-names = "pex", "afi", "pll_e", "cml";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
@@ -86,59 +90,74 @@
};
};
- host1x {
+ host1x@50000000 {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
+ resets = <&tegra_car 28>;
+ reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x54000000 0x54000000 0x04000000>;
- mpe {
+ mpe@54040000 {
compatible = "nvidia,tegra30-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_MPE>;
+ resets = <&tegra_car 60>;
+ reset-names = "mpe";
};
- vi {
+ vi@54080000 {
compatible = "nvidia,tegra30-vi";
reg = <0x54080000 0x00040000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_VI>;
+ resets = <&tegra_car 20>;
+ reset-names = "vi";
};
- epp {
+ epp@540c0000 {
compatible = "nvidia,tegra30-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_EPP>;
+ resets = <&tegra_car 19>;
+ reset-names = "epp";
};
- isp {
+ isp@54100000 {
compatible = "nvidia,tegra30-isp";
reg = <0x54100000 0x00040000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_ISP>;
+ resets = <&tegra_car 23>;
+ reset-names = "isp";
};
- gr2d {
+ gr2d@54140000 {
compatible = "nvidia,tegra30-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&tegra_car 21>;
+ reset-names = "2d";
clocks = <&tegra_car TEGRA30_CLK_GR2D>;
};
- gr3d {
+ gr3d@54180000 {
compatible = "nvidia,tegra30-gr3d";
reg = <0x54180000 0x00040000>;
clocks = <&tegra_car TEGRA30_CLK_GR3D
&tegra_car TEGRA30_CLK_GR3D2>;
clock-names = "3d", "3d2";
+ resets = <&tegra_car 24>,
+ <&tegra_car 98>;
+ reset-names = "3d", "3d2";
};
dc@54200000 {
@@ -147,7 +166,9 @@
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_DISP1>,
<&tegra_car TEGRA30_CLK_PLL_P>;
- clock-names = "disp1", "parent";
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
rgb {
status = "disabled";
@@ -160,24 +181,28 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_DISP2>,
<&tegra_car TEGRA30_CLK_PLL_P>;
- clock-names = "disp2", "parent";
+ clock-names = "dc", "parent";
+ resets = <&tegra_car 26>;
+ reset-names = "dc";
rgb {
status = "disabled";
};
};
- hdmi {
+ hdmi@54280000 {
compatible = "nvidia,tegra30-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_HDMI>,
<&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
status = "disabled";
};
- tvo {
+ tvo@542c0000 {
compatible = "nvidia,tegra30-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -185,10 +210,12 @@
status = "disabled";
};
- dsi {
+ dsi@54300000 {
compatible = "nvidia,tegra30-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA30_CLK_DSIA>;
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
status = "disabled";
};
};
@@ -201,7 +228,7 @@
clocks = <&tegra_car TEGRA30_CLK_TWD>;
};
- intc: interrupt-controller {
+ intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
reg = <0x50041000 0x1000
0x50040100 0x0100>;
@@ -209,7 +236,7 @@
#interrupt-cells = <3>;
};
- cache-controller {
+ cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
arm,data-latency = <6 6 2>;
@@ -230,13 +257,14 @@
clocks = <&tegra_car TEGRA30_CLK_TIMER>;
};
- tegra_car: clock {
+ tegra_car: clock@60006000 {
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
- apbdma: dma {
+ apbdma: dma@6000a000 {
compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
reg = <0x6000a000 0x1400>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -272,14 +300,17 @@
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
};
- ahb: ahb {
+ ahb: ahb@6000c004 {
compatible = "nvidia,tegra30-ahb";
reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
};
- gpio: gpio {
+ gpio: gpio@6000d000 {
compatible = "nvidia,tegra30-gpio";
reg = <0x6000d000 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -296,7 +327,7 @@
interrupt-controller;
};
- pinmux: pinmux {
+ pinmux: pinmux@70000868 {
compatible = "nvidia,tegra30-pinmux";
reg = <0x70000868 0xd4 /* Pad control registers */
0x70003000 0x3e4>; /* Mux registers */
@@ -315,8 +346,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car TEGRA30_CLK_UARTA>;
+ resets = <&tegra_car 6>;
+ reset-names = "serial";
+ dmas = <&apbdma 8>, <&apbdma 8>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -325,8 +359,11 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car TEGRA30_CLK_UARTB>;
+ resets = <&tegra_car 7>;
+ reset-names = "serial";
+ dmas = <&apbdma 9>, <&apbdma 9>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -335,8 +372,11 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car TEGRA30_CLK_UARTC>;
+ resets = <&tegra_car 55>;
+ reset-names = "serial";
+ dmas = <&apbdma 10>, <&apbdma 10>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -345,8 +385,11 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car TEGRA30_CLK_UARTD>;
+ resets = <&tegra_car 65>;
+ reset-names = "serial";
+ dmas = <&apbdma 19>, <&apbdma 19>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -355,20 +398,25 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car TEGRA30_CLK_UARTE>;
+ resets = <&tegra_car 66>;
+ reset-names = "serial";
+ dmas = <&apbdma 20>, <&apbdma 20>;
+ dma-names = "rx", "tx";
status = "disabled";
};
- pwm: pwm {
+ pwm: pwm@7000a000 {
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA30_CLK_PWM>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
status = "disabled";
};
- rtc {
+ rtc@7000e000 {
compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -384,6 +432,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C1>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 12>;
+ reset-names = "i2c";
+ dmas = <&apbdma 21>, <&apbdma 21>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -396,6 +448,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C2>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 54>;
+ reset-names = "i2c";
+ dmas = <&apbdma 22>, <&apbdma 22>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -408,6 +464,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C3>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 67>;
+ reset-names = "i2c";
+ dmas = <&apbdma 23>, <&apbdma 23>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -419,7 +479,11 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_I2C4>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+ resets = <&tegra_car 103>;
+ reset-names = "i2c";
clock-names = "div-clk", "fast-clk";
+ dmas = <&apbdma 26>, <&apbdma 26>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -432,6 +496,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C5>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
+ resets = <&tegra_car 47>;
+ reset-names = "i2c";
+ dmas = <&apbdma 24>, <&apbdma 24>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -439,10 +507,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC1>;
+ resets = <&tegra_car 41>;
+ reset-names = "spi";
+ dmas = <&apbdma 15>, <&apbdma 15>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -450,10 +521,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC2>;
+ resets = <&tegra_car 44>;
+ reset-names = "spi";
+ dmas = <&apbdma 16>, <&apbdma 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -461,10 +535,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC3>;
+ resets = <&tegra_car 46>;
+ reset-names = "spi";
+ dmas = <&apbdma 17>, <&apbdma 17>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -472,10 +549,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC4>;
+ resets = <&tegra_car 68>;
+ reset-names = "spi";
+ dmas = <&apbdma 18>, <&apbdma 18>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -483,10 +563,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000dc00 0x200>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC5>;
+ resets = <&tegra_car 104>;
+ reset-names = "spi";
+ dmas = <&apbdma 27>, <&apbdma 27>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -494,29 +577,34 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000de00 0x200>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC6>;
+ resets = <&tegra_car 106>;
+ reset-names = "spi";
+ dmas = <&apbdma 28>, <&apbdma 28>;
+ dma-names = "rx", "tx";
status = "disabled";
};
- kbc {
+ kbc@7000e200 {
compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_KBC>;
+ resets = <&tegra_car 36>;
+ reset-names = "kbc";
status = "disabled";
};
- pmc {
+ pmc@7000e400 {
compatible = "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
clock-names = "pclk", "clk32k_in";
};
- memory-controller {
+ memory-controller@7000f000 {
compatible = "nvidia,tegra30-mc";
reg = <0x7000f000 0x010
0x7000f03c 0x1b4
@@ -525,7 +613,7 @@
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
- iommu {
+ iommu@7000f010 {
compatible = "nvidia,tegra30-smmu";
reg = <0x7000f010 0x02c
0x7000f1f0 0x010
@@ -535,26 +623,34 @@
nvidia,ahb = <&ahb>;
};
- ahub {
+ ahub@70080000 {
compatible = "nvidia,tegra30-ahub";
reg = <0x70080000 0x200
0x70080200 0x100>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
- <&tegra_car TEGRA30_CLK_APBIF>,
- <&tegra_car TEGRA30_CLK_I2S0>,
- <&tegra_car TEGRA30_CLK_I2S1>,
- <&tegra_car TEGRA30_CLK_I2S2>,
- <&tegra_car TEGRA30_CLK_I2S3>,
- <&tegra_car TEGRA30_CLK_I2S4>,
- <&tegra_car TEGRA30_CLK_DAM0>,
- <&tegra_car TEGRA30_CLK_DAM1>,
- <&tegra_car TEGRA30_CLK_DAM2>,
- <&tegra_car TEGRA30_CLK_SPDIF_IN>;
- clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ <&tegra_car TEGRA30_CLK_APBIF>;
+ clock-names = "d_audio", "apbif";
+ resets = <&tegra_car 106>, /* d_audio */
+ <&tegra_car 107>, /* apbif */
+ <&tegra_car 30>, /* i2s0 */
+ <&tegra_car 11>, /* i2s1 */
+ <&tegra_car 18>, /* i2s2 */
+ <&tegra_car 101>, /* i2s3 */
+ <&tegra_car 102>, /* i2s4 */
+ <&tegra_car 108>, /* dam0 */
+ <&tegra_car 109>, /* dam1 */
+ <&tegra_car 110>, /* dam2 */
+ <&tegra_car 10>; /* spdif */
+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
- "spdif_in";
+ "spdif";
+ dmas = <&apbdma 1>, <&apbdma 1>,
+ <&apbdma 2>, <&apbdma 2>,
+ <&apbdma 3>, <&apbdma 3>,
+ <&apbdma 4>, <&apbdma 4>;
+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+ "rx3", "tx3";
ranges;
#address-cells = <1>;
#size-cells = <1>;
@@ -564,6 +660,8 @@
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car TEGRA30_CLK_I2S0>;
+ resets = <&tegra_car 30>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -572,6 +670,8 @@
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
clocks = <&tegra_car TEGRA30_CLK_I2S1>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -580,6 +680,8 @@
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
clocks = <&tegra_car TEGRA30_CLK_I2S2>;
+ resets = <&tegra_car 18>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -588,6 +690,8 @@
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
clocks = <&tegra_car TEGRA30_CLK_I2S3>;
+ resets = <&tegra_car 101>;
+ reset-names = "i2s";
status = "disabled";
};
@@ -596,6 +700,8 @@
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
clocks = <&tegra_car TEGRA30_CLK_I2S4>;
+ resets = <&tegra_car 102>;
+ reset-names = "i2s";
status = "disabled";
};
};
@@ -605,6 +711,8 @@
reg = <0x78000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
status = "disabled";
};
@@ -613,6 +721,8 @@
reg = <0x78000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
+ resets = <&tegra_car 9>;
+ reset-names = "sdhci";
status = "disabled";
};
@@ -621,6 +731,8 @@
reg = <0x78000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+ resets = <&tegra_car 69>;
+ reset-names = "sdhci";
status = "disabled";
};
@@ -629,6 +741,8 @@
reg = <0x78000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
+ resets = <&tegra_car 15>;
+ reset-names = "sdhci";
status = "disabled";
};
@@ -638,6 +752,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>;
+ resets = <&tegra_car 22>;
+ reset-names = "usb";
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
@@ -669,20 +785,33 @@
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- phy_type = "ulpi";
+ phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB2>;
+ resets = <&tegra_car 58>;
+ reset-names = "usb";
nvidia,phy = <&phy2>;
status = "disabled";
};
phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra30-usb-phy";
- reg = <0x7d004000 0x4000>;
- phy_type = "ulpi";
+ reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
+ phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB2>,
<&tegra_car TEGRA30_CLK_PLL_U>,
- <&tegra_car TEGRA30_CLK_CDEV2>;
- clock-names = "reg", "pll_u", "ulpi-link";
+ <&tegra_car TEGRA30_CLK_USBD>;
+ clock-names = "reg", "pll_u", "utmi-pads";
+ nvidia,hssync-start-delay = <9>;
+ nvidia,idle-wait-delay = <17>;
+ nvidia,elastic-limit = <16>;
+ nvidia,term-range-adj = <6>;
+ nvidia,xcvr-setup = <51>;
+ nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ nvidia,xcvr-hsslew = <32>;
+ nvidia,hssquelch-level = <2>;
+ nvidia,hsdiscon-level = <5>;
status = "disabled";
};
@@ -692,6 +821,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>;
+ resets = <&tegra_car 59>;
+ reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index e7f73b2..5d7681b 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -15,6 +15,25 @@
/ {
compatible = "xlnx,zynq-7000";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&clkc 3>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ clocks = <&clkc 3>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 5 4>, <0 6 4>;
@@ -65,6 +84,24 @@
interrupts = <0 50 4>;
};
+ gem0: ethernet@e000b000 {
+ compatible = "cdns,gem";
+ reg = <0xe000b000 0x4000>;
+ status = "disabled";
+ interrupts = <0 22 4>;
+ clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ };
+
+ gem1: ethernet@e000c000 {
+ compatible = "cdns,gem";
+ reg = <0xe000c000 0x4000>;
+ status = "disabled";
+ interrupts = <0 45 4>;
+ clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ };
+
slcr: slcr@f8000000 {
compatible = "xlnx,zynq-slcr";
reg = <0xF8000000 0x1000>;
@@ -106,7 +143,6 @@
compatible = "cdns,ttc";
clocks = <&clkc 6>;
reg = <0xF8001000 0x1000>;
- clock-ranges;
};
ttc1: ttc1@f8002000 {
@@ -115,7 +151,6 @@
compatible = "cdns,ttc";
clocks = <&clkc 6>;
reg = <0xF8002000 0x1000>;
- clock-ranges;
};
scutimer: scutimer@f8f00600 {
interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 21aea99..34d680a 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -29,6 +29,11 @@
};
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii";
+};
+
&uart1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 79009e0..b2835d5 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -30,6 +30,11 @@
};
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii";
+};
+
&uart1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index d6acf2b..2eda068 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -30,6 +30,11 @@
};
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii";
+};
+
&uart1 {
status = "okay";
};
diff --git a/arch/arm/configs/ape6evm_defconfig b/arch/arm/configs/ape6evm_defconfig
index 1ce3994..cb26c62 100644
--- a/arch/arm/configs/ape6evm_defconfig
+++ b/arch/arm/configs/ape6evm_defconfig
@@ -13,7 +13,7 @@
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_BLOCK is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A73A4=y
CONFIG_MACH_APE6EVM=y
# CONFIG_ARM_THUMB is not set
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index fae939d..5abf1a2 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -15,7 +15,7 @@
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A7740=y
CONFIG_MACH_ARMADILLO800EVA=y
# CONFIG_SH_TIMER_TMU is not set
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
index b38cd10..1dd3971 100644
--- a/arch/arm/configs/bockw_defconfig
+++ b/arch/arm/configs/bockw_defconfig
@@ -8,7 +8,7 @@
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A7778=y
CONFIG_MACH_BOCKW=y
CONFIG_MEMORY_START=0x60000000
diff --git a/arch/arm/configs/koelsch_defconfig b/arch/arm/configs/koelsch_defconfig
index 825c16d..7fd65a0 100644
--- a/arch/arm/configs/koelsch_defconfig
+++ b/arch/arm/configs/koelsch_defconfig
@@ -9,7 +9,7 @@
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_BLOCK is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A7791=y
CONFIG_MACH_KOELSCH=y
# CONFIG_SWP_EMULATE is not set
diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig
index 6c37f4a..217f1dd 100644
--- a/arch/arm/configs/kzm9d_defconfig
+++ b/arch/arm/configs/kzm9d_defconfig
@@ -13,7 +13,7 @@
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_EMEV2=y
CONFIG_MACH_KZM9D=y
CONFIG_MEMORY_START=0x40000000
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 1ad0280..9934dbc 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -22,7 +22,7 @@
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_SH73A0=y
CONFIG_MACH_KZM9G=y
CONFIG_MEMORY_START=0x41000000
diff --git a/arch/arm/configs/lager_defconfig b/arch/arm/configs/lager_defconfig
index 35bff5e..35dc8b2 100644
--- a/arch/arm/configs/lager_defconfig
+++ b/arch/arm/configs/lager_defconfig
@@ -12,7 +12,7 @@
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A7790=y
CONFIG_MACH_LAGER=y
# CONFIG_SH_TIMER_TMU is not set
diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig
index 9fb1189..a61e165 100644
--- a/arch/arm/configs/mackerel_defconfig
+++ b/arch/arm/configs/mackerel_defconfig
@@ -14,7 +14,7 @@
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_SH7372=y
CONFIG_MACH_MACKEREL=y
CONFIG_MEMORY_SIZE=0x10000000
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 5cc6360..6981338 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -9,7 +9,7 @@
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A7779=y
CONFIG_MACH_MARZEN=y
CONFIG_MEMORY_START=0x60000000
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 699b71e..b4f7d6f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,15 +1,33 @@
if ARCH_AT91
+config HAVE_AT91_UTMI
+ bool
+
+config HAVE_AT91_USB_CLK
+ bool
+
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
+config AT91_USE_OLD_CLK
+ bool
+
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
+config COMMON_CLK_AT91
+ bool
+ default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
+ select COMMON_CLK
+
+config OLD_CLK_AT91
+ bool
+ default AT91_PMC_UNIT && AT91_USE_OLD_CLK
+
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
@@ -21,6 +39,9 @@
config AT91_SAM9_TIME
bool
+config HAVE_AT91_SMD
+ bool
+
config SOC_AT91SAM9
bool
select AT91_SAM9_TIME
@@ -65,6 +86,9 @@
select SOC_SAMA5
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU1
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_SMD
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's SAMA5D3 family SoC.
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
@@ -78,11 +102,15 @@
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select HAVE_AT91_DBGU0
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
@@ -92,6 +120,8 @@
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
@@ -100,18 +130,25 @@
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_UTMI
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
@@ -121,6 +158,10 @@
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_SMD
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
@@ -133,6 +174,8 @@
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index ca900be..b736b57 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -12,26 +12,32 @@
config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
+ select AT91_USE_OLD_CLK
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
select SOC_AT91SAM9260
+ select AT91_USE_OLD_CLK
config ARCH_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9261
+ select AT91_USE_OLD_CLK
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
+ select AT91_USE_OLD_CLK
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
+ select AT91_USE_OLD_CLK
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
+ select AT91_USE_OLD_CLK
config ARCH_AT91X40
bool "AT91x40"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 90aab2d..705b38a 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -7,7 +7,7 @@
obj-n :=
obj- :=
-obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
+obj-$(CONFIG_OLD_CLK_AT91) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 25805f2..e47f5fd 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -12,13 +12,13 @@
#include <linux/module.h>
#include <linux/reboot.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91rm9200.h>
-#include <mach/at91_pmc.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d6a1fa8..6c821e5 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -20,7 +21,6 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 23ba1d8..6276b4c 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -19,7 +20,6 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 7eccb0f..37b90f4 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,6 +11,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -18,7 +19,6 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index bb39232..0f04ffe 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -39,6 +39,7 @@
static u32 pit_cycle; /* write-once */
static u32 pit_cnt; /* access only w/system irq blocked */
static void __iomem *pit_base_addr __read_mostly;
+static struct clk *mck;
static inline unsigned int pit_read(unsigned int reg_offset)
{
@@ -195,10 +196,14 @@
if (!pit_base_addr)
goto node_err;
+ mck = of_clk_get(np, 0);
+
/* Get the interrupts property */
ret = irq_of_parse_and_map(np, 0);
if (!ret) {
pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
+ if (!IS_ERR(mck))
+ clk_put(mck);
goto ioremap_err;
}
at91sam926x_pit_irq.irq = ret;
@@ -230,6 +235,8 @@
unsigned bits;
int ret;
+ mck = ERR_PTR(-ENOENT);
+
/* For device tree enabled device: initialize here */
of_at91sam926x_pit_init();
@@ -237,7 +244,12 @@
* Use our actual MCK to figure out how many MCK/16 ticks per
* 1/HZ period (instead of a compile-time constant LATCH).
*/
- pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
+ if (IS_ERR(mck))
+ mck = clk_get(NULL, "mck");
+
+ if (IS_ERR(mck))
+ panic("AT91: PIT: Unable to get mck clk\n");
+ pit_rate = clk_get_rate(mck) / 16;
pit_cycle = (pit_rate + HZ/2) / HZ;
WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 9405aa0..2f455ce 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,13 +12,13 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 388ec3a..4ef088c 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -8,12 +8,12 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9n12.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "board.h"
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 0750ffb..3651517 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,6 +10,7 @@
*/
#include <linux/module.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@@ -19,7 +20,6 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
-#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index e8a2e07..3e8ec26 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -8,12 +8,12 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9x5.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "board.h"
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index bf00d15..075ec05 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -16,6 +16,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
+#include <linux/clk-provider.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -26,6 +27,13 @@
#include "at91_aic.h"
#include "generic.h"
+static void __init sama5_dt_timer_init(void)
+{
+#if defined(CONFIG_COMMON_CLK)
+ of_clk_init(NULL);
+#endif
+ at91sam926x_pit_init();
+}
static const struct of_device_id irq_of_match[] __initconst = {
@@ -72,7 +80,7 @@
DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
/* Maintainer: Atmel */
- .init_time = at91sam926x_pit_init,
+ .init_time = sama5_dt_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic5_handle_irq,
.init_early = at91_dt_initialize,
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6b2630a..72b2579 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -24,9 +24,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of_address.h>
+#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include <asm/proc-fns.h>
@@ -884,6 +884,11 @@
#if defined(CONFIG_OF)
static struct of_device_id pmc_ids[] = {
{ .compatible = "atmel,at91rm9200-pmc" },
+ { .compatible = "atmel,at91sam9260-pmc" },
+ { .compatible = "atmel,at91sam9g45-pmc" },
+ { .compatible = "atmel,at91sam9n12-pmc" },
+ { .compatible = "atmel,at91sam9x5-pmc" },
+ { .compatible = "atmel,sama5d3-pmc" },
{ /*sentinel*/ }
};
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 26dee3c..631fa3b 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -46,11 +46,12 @@
extern void at91x40_timer_init(void);
/* Clocks */
-#ifdef CONFIG_AT91_PMC_UNIT
+#ifdef CONFIG_OLD_CLK_AT91
extern int __init at91_clock_init(unsigned long main_clock);
extern int __init at91_dt_clock_init(void);
#else
static int inline at91_clock_init(unsigned long main_clock) { return 0; }
+static int inline at91_dt_clock_init(void) { return 0; }
#endif
struct device;
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 9986542..d43b79f 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -19,13 +19,13 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 098c28d..2001877 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -13,8 +13,8 @@
*/
#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
#include <mach/at91_ramc.h>
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index a28873f..3d775d0 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -9,360 +9,19 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/sama5d3.h>
-#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pid = SAMA5D3_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pid = SAMA5D3_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pid = SAMA5D3_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
- .name = "pioD_clk",
- .pid = SAMA5D3_ID_PIOD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioE_clk = {
- .name = "pioE_clk",
- .pid = SAMA5D3_ID_PIOE,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pid = SAMA5D3_ID_USART0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pid = SAMA5D3_ID_USART1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pid = SAMA5D3_ID_USART2,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pid = SAMA5D3_ID_USART3,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk uart0_clk = {
- .name = "uart0_clk",
- .pid = SAMA5D3_ID_UART0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk uart1_clk = {
- .name = "uart1_clk",
- .pid = SAMA5D3_ID_UART1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pid = SAMA5D3_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV8,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pid = SAMA5D3_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV8,
-};
-static struct clk twi2_clk = {
- .name = "twi2_clk",
- .pid = SAMA5D3_ID_TWI2,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV8,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pid = SAMA5D3_ID_HSMCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pid = SAMA5D3_ID_HSMCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc2_clk = {
- .name = "mci2_clk",
- .pid = SAMA5D3_ID_HSMCI2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pid = SAMA5D3_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pid = SAMA5D3_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
- .name = "tcb0_clk",
- .pid = SAMA5D3_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk tcb1_clk = {
- .name = "tcb1_clk",
- .pid = SAMA5D3_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pid = SAMA5D3_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk adc_op_clk = {
- .name = "adc_op_clk",
- .type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 5000000,
-};
-static struct clk dma0_clk = {
- .name = "dma0_clk",
- .pid = SAMA5D3_ID_DMA0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma1_clk = {
- .name = "dma1_clk",
- .pid = SAMA5D3_ID_DMA1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
- .name = "uhphs",
- .pid = SAMA5D3_ID_UHPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pid = SAMA5D3_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* gmac only for sama5d33, sama5d34, sama5d35 */
-static struct clk macb0_clk = {
- .name = "macb0_clk",
- .pid = SAMA5D3_ID_GMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* emac only for sama5d31, sama5d35 */
-static struct clk macb1_clk = {
- .name = "macb1_clk",
- .pid = SAMA5D3_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* lcd only for sama5d31, sama5d33, sama5d34 */
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pid = SAMA5D3_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* isi only for sama5d33, sama5d35 */
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pid = SAMA5D3_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can0_clk = {
- .name = "can0_clk",
- .pid = SAMA5D3_ID_CAN0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk can1_clk = {
- .name = "can1_clk",
- .pid = SAMA5D3_ID_CAN1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pid = SAMA5D3_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pid = SAMA5D3_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV2,
-};
-static struct clk sha_clk = {
- .name = "sha_clk",
- .pid = SAMA5D3_ID_SHA,
- .type = CLK_TYPE_PERIPHERAL,
- .div = AT91_PMC_PCR_DIV8,
-};
-static struct clk aes_clk = {
- .name = "aes_clk",
- .pid = SAMA5D3_ID_AES,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tdes_clk = {
- .name = "tdes_clk",
- .pid = SAMA5D3_ID_TDES,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &pioD_clk,
- &pioE_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &uart0_clk,
- &uart1_clk,
- &twi0_clk,
- &twi1_clk,
- &twi2_clk,
- &mmc0_clk,
- &mmc1_clk,
- &mmc2_clk,
- &spi0_clk,
- &spi1_clk,
- &tcb0_clk,
- &tcb1_clk,
- &adc_clk,
- &adc_op_clk,
- &dma0_clk,
- &dma1_clk,
- &uhphs_clk,
- &udphs_clk,
- &macb0_clk,
- &macb1_clk,
- &lcdc_clk,
- &isi_clk,
- &can0_clk,
- &can1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &sha_clk,
- &aes_clk,
- &tdes_clk,
-};
-
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
- CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
- CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
- CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
- CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
- CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
- CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
- CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
- CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
- CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
- CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
- CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
- CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
- CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
- CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
- CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
- CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
- CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
- CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
-};
-
-static void __init sama5d3_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
-}
-
-/* --------------------------------------------------------------------
* AT91SAM9x5 processor initialization
* -------------------------------------------------------------------- */
@@ -378,6 +37,5 @@
AT91_SOC_START(sama5d3)
.map_io = sama5d3_map_io,
- .register_clocks = sama5d3_register_clocks,
.init = sama5d3_initialize,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 094b345..7d3f7cc 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -11,6 +11,7 @@
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
@@ -18,7 +19,6 @@
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
#include "at91_shdwc.h"
#include "soc.h"
@@ -491,7 +491,8 @@
at91_dt_clock_init();
/* Register the processor-specific clocks */
- at91_boot_soc.register_clocks();
+ if (at91_boot_soc.register_clocks)
+ at91_boot_soc.register_clocks();
at91_boot_soc.init();
}
@@ -506,7 +507,8 @@
at91_dt_clock_init();
/* Register the processor-specific clocks */
- at91_boot_soc.register_clocks();
+ if (at91_boot_soc.register_clocks)
+ at91_boot_soc.register_clocks();
if (at91_boot_soc.init)
at91_boot_soc.init();
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index c122bcf..0d1a892 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -162,7 +162,7 @@
/*****************************************************************************
* SoC RTC
****************************************************************************/
-void __init dove_rtc_init(void)
+static void __init dove_rtc_init(void)
{
orion_rtc_init(DOVE_RTC_PHYS_BASE, IRQ_DOVE_RTC);
}
@@ -257,18 +257,9 @@
}
/*****************************************************************************
- * Cryptographic Engines and Security Accelerator (CESA)
- ****************************************************************************/
-void __init dove_crypto_init(void)
-{
- orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
- DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
-}
-
-/*****************************************************************************
* XOR 0
****************************************************************************/
-void __init dove_xor0_init(void)
+static void __init dove_xor0_init(void)
{
orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01);
@@ -277,7 +268,7 @@
/*****************************************************************************
* XOR 1
****************************************************************************/
-void __init dove_xor1_init(void)
+static void __init dove_xor1_init(void)
{
orion_xor1_init(DOVE_XOR1_PHYS_BASE, DOVE_XOR1_HIGH_PHYS_BASE,
IRQ_DOVE_XOR_10, IRQ_DOVE_XOR_11);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index d50dc2d..cc1d3fe 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -63,6 +63,9 @@
/* Base address to the AP system controller */
void __iomem *ap_syscon_base;
+/* Base address to the external bus interface */
+static void __iomem *ebi_base;
+
/*
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
@@ -72,15 +75,11 @@
* just for now).
*/
#define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE)
-#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE)
-#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC)
/*
* Logical Physical
* ef000000 Cache flush
- * f1000000 10000000 Core module registers
* f1100000 11000000 System controller registers
- * f1200000 12000000 EBI registers
* f1300000 13000000 Counter/Timer
* f1400000 14000000 Interrupt controller
* f1600000 16000000 UART 0
@@ -91,16 +90,6 @@
static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
{
- .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
.length = SZ_4K,
@@ -174,9 +163,6 @@
/*
* Flash handling.
*/
-#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
-#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-
static int ap_flash_init(struct platform_device *dev)
{
u32 tmp;
@@ -184,13 +170,15 @@
writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
- tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE;
- writel(tmp, EBI_CSR1);
+ tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) |
+ INTEGRATOR_EBI_WRITE_ENABLE;
+ writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
- if (!(readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE)) {
- writel(0xa05f, EBI_LOCK);
- writel(tmp, EBI_CSR1);
- writel(0, EBI_LOCK);
+ if (!(readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET)
+ & INTEGRATOR_EBI_WRITE_ENABLE)) {
+ writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
+ writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
+ writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
}
return 0;
}
@@ -202,13 +190,15 @@
writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP,
ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET);
- tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE;
- writel(tmp, EBI_CSR1);
+ tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) &
+ ~INTEGRATOR_EBI_WRITE_ENABLE;
+ writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
- if (readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE) {
- writel(0xa05f, EBI_LOCK);
- writel(tmp, EBI_CSR1);
- writel(0, EBI_LOCK);
+ if (readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) &
+ INTEGRATOR_EBI_WRITE_ENABLE) {
+ writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
+ writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET);
+ writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET);
}
}
@@ -475,11 +465,17 @@
{ },
};
+static const struct of_device_id ebi_match[] = {
+ { .compatible = "arm,external-bus-interface"},
+ { },
+};
+
static void __init ap_init_of(void)
{
unsigned long sc_dec;
struct device_node *root;
struct device_node *syscon;
+ struct device_node *ebi;
struct device *parent;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
@@ -495,10 +491,16 @@
syscon = of_find_matching_node(root, ap_syscon_match);
if (!syscon)
return;
+ ebi = of_find_matching_node(root, ebi_match);
+ if (!ebi)
+ return;
ap_syscon_base = of_iomap(syscon, 0);
if (!ap_syscon_base)
return;
+ ebi_base = of_iomap(ebi, 0);
+ if (!ebi_base)
+ return;
ap_sc_id = readl(ap_syscon_base);
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4fc0a19..5e84149 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -64,9 +64,6 @@
/*
* Logical Physical
- * f1000000 10000000 Core module registers
- * f1100000 11000000 System controller registers
- * f1200000 12000000 EBI registers
* f1300000 13000000 Counter/Timer
* f1400000 14000000 Interrupt controller
* f1600000 16000000 UART 0
@@ -74,21 +71,10 @@
* f1a00000 1a000000 Debug LEDs
* fc900000 c9000000 GPIO
* fca00000 ca000000 SIC
- * fcb00000 cb000000 CP system control
*/
static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
{
- .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
.length = SZ_4K,
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 9caa4fe..7818815 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -10,55 +10,21 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <plat/irq.h>
#include <plat/common.h>
#include "common.h"
-/*
- * There are still devices that doesn't know about DT yet. Get clock
- * gates here and add a clock lookup alias, so that old platform
- * devices still work.
-*/
-
-static void __init kirkwood_legacy_clk_init(void)
-{
-
- struct device_node *np = of_find_compatible_node(
- NULL, NULL, "marvell,kirkwood-gating-clock");
- struct of_phandle_args clkspec;
- struct clk *clk;
-
- clkspec.np = np;
- clkspec.args_count = 1;
-
- /*
- * The ethernet interfaces forget the MAC address assigned by
- * u-boot if the clocks are turned off. Until proper DT support
- * is available we always enable them for now.
- */
- clkspec.args[0] = CGC_BIT_GE0;
- clk = of_clk_get_from_provider(&clkspec);
- clk_prepare_enable(clk);
-
- clkspec.args[0] = CGC_BIT_GE1;
- clk = of_clk_get_from_provider(&clkspec);
- clk_prepare_enable(clk);
-}
-
#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
@@ -140,7 +106,7 @@
static void __init kirkwood_dt_init(void)
{
- pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
+ pr_info("Kirkwood: %s.\n", kirkwood_id());
/*
* Disable propagation of mbus errors to the CPU local bus,
@@ -156,8 +122,6 @@
kirkwood_cpufreq_init();
kirkwood_cpuidle_init();
- /* Setup clocks for legacy devices */
- kirkwood_legacy_clk_init();
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 2586c28..702553b 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -44,6 +44,7 @@
config ARCH_MSM8X60
bool "MSM8X60"
+ select ARCH_MSM_DT
select ARM_GIC
select CPU_V7
select GPIO_MSM_V2
@@ -52,15 +53,25 @@
config ARCH_MSM8960
bool "MSM8960"
+ select ARCH_MSM_DT
select ARM_GIC
select CPU_V7
select HAVE_SMP
select GPIO_MSM_V2
select MSM_SCM if SMP
+config ARCH_MSM8974
+ bool "MSM8974"
+ select ARCH_MSM_DT
+ select ARM_GIC
+ select CPU_V7
+ select HAVE_ARM_ARCH_TIMER
+ select HAVE_SMP
+ select MSM_SCM if SMP
+ select USE_OF
+
config ARCH_MSM_DT
- def_bool y
- depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+ bool
select SPARSE_IRQ
select USE_OF
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index ccf6621..015d544 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*
*/
+#define pr_fmt(fmt) "%s: " fmt, __func__
#include <linux/kernel.h>
#include <linux/init.h>
@@ -68,12 +69,11 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_MMC
- rc = trout_init_mmc(system_rev);
- if (rc)
- printk(KERN_CRIT "%s: MMC init failure (%d)\n", __func__, rc);
-#endif
-
+ if (IS_ENABLED(CONFIG_MMC)) {
+ rc = trout_init_mmc(system_rev);
+ if (rc)
+ pr_crit("MMC init failure (%d)\n", rc);
+ }
}
static struct map_desc trout_io_desc[] __initdata = {
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 58adf2f..4e9d581 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -27,6 +27,7 @@
#include <asm/smp_plat.h>
#include <asm/cacheflush.h>
#include "armada-370-xp.h"
+#include "coherency.h"
unsigned long coherency_phys_base;
static void __iomem *coherency_base;
diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h
index df33ad8..760226c 100644
--- a/arch/arm/mach-mvebu/coherency.h
+++ b/arch/arm/mach-mvebu/coherency.h
@@ -14,7 +14,9 @@
#ifndef __MACH_370_XP_COHERENCY_H
#define __MACH_370_XP_COHERENCY_H
-int set_cpu_coherent(int cpu_id, int smp_group_id);
+extern unsigned long coherency_phys_base;
+
+int set_cpu_coherent(unsigned int cpu_id, int smp_group_id);
int coherency_init(void);
#endif /* __MACH_370_XP_COHERENCY_H */
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index e366010..0e6016f 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -26,7 +26,6 @@
void armada_xp_cpu_die(unsigned int cpu);
int armada_370_xp_coherency_init(void);
-int armada_370_xp_pmsu_init(void);
void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif
diff --git a/arch/arm/mach-mvebu/hotplug.c b/arch/arm/mach-mvebu/hotplug.c
index b228b6a..d95e910 100644
--- a/arch/arm/mach-mvebu/hotplug.c
+++ b/arch/arm/mach-mvebu/hotplug.c
@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/proc-fns.h>
+#include "common.h"
/*
* platform-specific code to shutdown a CPU
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index ff69c2d..a6da03f 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -46,7 +46,7 @@
return cpu_clk;
}
-void __init set_secondary_cpus_clock(void)
+static void __init set_secondary_cpus_clock(void)
{
int thiscpu, cpu;
unsigned long rate;
@@ -94,7 +94,7 @@
set_smp_cross_call(armada_mpic_send_doorbell);
}
-void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
+static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *node;
struct resource res;
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 27fc4f0..d71ef53 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
+#include "pmsu.h"
static void __iomem *pmsu_mp_base;
static void __iomem *pmsu_reset_base;
@@ -58,7 +59,7 @@
}
#endif
-int __init armada_370_xp_pmsu_init(void)
+static int __init armada_370_xp_pmsu_init(void)
{
struct device_node *np;
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index 5175083c..a7fb89a 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -27,6 +27,7 @@
#include <linux/of_address.h>
#include <linux/io.h>
#include <linux/reboot.h>
+#include "common.h"
static void __iomem *system_controller_base;
@@ -39,14 +40,14 @@
};
static struct mvebu_system_controller *mvebu_sc;
-const struct mvebu_system_controller armada_370_xp_system_controller = {
+static const struct mvebu_system_controller armada_370_xp_system_controller = {
.rstoutn_mask_offset = 0x60,
.system_soft_reset_offset = 0x64,
.rstoutn_mask_reset_out_en = 0x1,
.system_soft_reset = 0x1,
};
-const struct mvebu_system_controller orion_system_controller = {
+static const struct mvebu_system_controller orion_system_controller = {
.rstoutn_mask_offset = 0x108,
.system_soft_reset_offset = 0x10c,
.rstoutn_mask_reset_out_en = 0x4,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index cce2c9d..4a1065e 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -110,38 +110,6 @@
}
/*
- * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
- * to simply request an IRQ passed as a resource. So the GPIO pin needs
- * to be requested by this hog and set as input.
- */
-static int __init cpu8815_eth_init(void)
-{
- struct device_node *eth;
- int gpio, irq, err;
-
- eth = of_find_node_by_path("/usb-s8815/ethernet-gpio");
- if (!eth) {
- pr_info("could not find any ethernet GPIO\n");
- return 0;
- }
- gpio = of_get_gpio(eth, 0);
- err = gpio_request(gpio, "eth_irq");
- if (err) {
- pr_info("failed to request ethernet GPIO\n");
- return -ENODEV;
- }
- err = gpio_direction_input(gpio);
- if (err) {
- pr_info("failed to set ethernet GPIO as input\n");
- return -ENODEV;
- }
- irq = gpio_to_irq(gpio);
- pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq);
- return 0;
-}
-device_initcall(cpu8815_eth_init);
-
-/*
* This GPIO pin turns on a line that is used to detect card insertion
* on this board.
*/
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index b91002c..c134a82 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -21,7 +21,7 @@
#include <plat/irq.h>
#include "common.h"
-struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
NULL),
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 91a5852..3f1de11 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -24,7 +24,6 @@
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/system_misc.h>
-#include <asm/timex.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -135,7 +134,7 @@
/*****************************************************************************
* SPI
****************************************************************************/
-void __init orion5x_spi_init()
+void __init orion5x_spi_init(void)
{
orion_spi_init(SPI_PHYS_BASE);
}
@@ -185,7 +184,7 @@
/*****************************************************************************
* Watchdog
****************************************************************************/
-void __init orion5x_wdt_init(void)
+static void __init orion5x_wdt_init(void)
{
orion_wdt_init();
}
@@ -246,7 +245,7 @@
int orion5x_tclk;
-int __init orion5x_find_tclk(void)
+static int __init orion5x_find_tclk(void)
{
u32 dev, rev;
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 4b2aefd..dc01c4f 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -202,7 +202,7 @@
* PCI
****************************************************************************/
-void __init db88f5281_pci_preinit(void)
+static void __init db88f5281_pci_preinit(void)
{
int pin;
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 30a192b..9654b0c 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -16,6 +16,7 @@
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
+#include "common.h"
static int __initdata gpio0_irqs[4] = {
IRQ_ORION5X_GPIO_0_7,
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 7fab670..87a12d6 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -240,11 +240,11 @@
#define PCI_BAR_SIZE_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
- ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
+ ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : NULL)
#define PCI_BAR_REMAP_DDR_CS(n) (((n) == 0) ? ORION5X_PCI_REG(0xc48) : \
((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
- ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
+ ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : NULL)
#define PCI_BAR_ENABLE ORION5X_PCI_REG(0xc3c)
#define PCI_ADDR_DECODE_CTRL ORION5X_PCI_REG(0xd3c)
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index b1cf684..b576ef5 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -108,7 +108,7 @@
* PCI
****************************************************************************/
-void __init rd88f5182_pci_preinit(void)
+static void __init rd88f5182_pci_preinit(void)
{
int pin;
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 7e90648..6208d12 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -77,7 +77,7 @@
#define TSP2_PCI_SLOT0_OFFS 7
#define TSP2_PCI_SLOT0_IRQ_PIN 11
-void __init tsp2_pci_preinit(void)
+static void __init tsp2_pci_preinit(void)
{
int pin;
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index e90c061..9136797 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -106,7 +106,7 @@
#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6
#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7
-void __init qnap_ts209_pci_preinit(void)
+static void __init qnap_ts209_pci_preinit(void)
{
int pin;
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index e960855..db16dae 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -57,7 +57,7 @@
},
};
-void __init ts78xx_map_io(void)
+static void __init ts78xx_map_io(void)
{
orion5x_map_io();
iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 58d46a3..97ae470 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -36,7 +36,9 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
@@ -214,6 +216,13 @@
.dev.platform_data = &mini6410_lcd_power_data,
};
+static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S3C64XX_GPN(10),
+ .ext_cd_gpio_invert = true,
+};
+
static struct platform_device *mini6410_devices[] __initdata = {
&mini6410_device_eth,
&s3c_device_hsmmc0,
@@ -321,6 +330,7 @@
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
+ s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index a4a4b75..8c88892 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,10 @@
+config ARCH_SHMOBILE
+ bool
+
config ARCH_SHMOBILE_MULTI
bool "SH-Mobile Series" if ARCH_MULTI_V7
depends on MMU
+ select ARCH_SHMOBILE
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
@@ -8,6 +12,7 @@
select HAVE_SMP
select ARM_GIC
select MIGHT_HAVE_CACHE_L2X0
+ select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
@@ -30,7 +35,7 @@
comment "SH-Mobile System Configuration"
endif
-if ARCH_SHMOBILE
+if ARCH_SHMOBILE_LEGACY
comment "SH-Mobile System Type"
@@ -92,23 +97,31 @@
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
select SH_CLK_CPG
+ select RENESAS_IRQC
config ARCH_EMEV2
bool "Emma Mobile EV2"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
+ select MIGHT_HAVE_PCI
+ select USE_OF
+ select AUTO_ZRELADDR
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
@@ -230,12 +243,7 @@
bool "Koelsch board"
depends on ARCH_R8A7791
select USE_OF
-
-config MACH_KZM9D
- bool "KZM9D board"
- depends on ARCH_EMEV2
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select USE_OF
+ select MICREL_PHY if SH_ETH
config MACH_KZM9G
bool "KZM-A9-GT board"
@@ -274,7 +282,7 @@
endif
-if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI
+if ARCH_SHMOBILE
menu "Timer and clock configuration"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 51db2bc..c7e8774 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -71,7 +71,6 @@
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
-obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 391d72a..4f30e3d 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -8,7 +8,6 @@
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
loadaddr-$(CONFIG_MACH_GENMAI) += 0x8008000
loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
-loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 0fa068e..fe071a9 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -168,7 +168,7 @@
};
static const struct resource mmcif0_resources[] __initconst = {
- DEFINE_RES_MEM_NAMED(0xee200000, 0x100, "MMCIF0"),
+ DEFINE_RES_MEM(0xee200000, 0x100),
DEFINE_RES_IRQ(gic_spi(169)),
};
@@ -179,7 +179,7 @@
};
static const struct resource sdhi0_resources[] __initconst = {
- DEFINE_RES_MEM_NAMED(0xee100000, 0x100, "SDHI0"),
+ DEFINE_RES_MEM(0xee100000, 0x100),
DEFINE_RES_IRQ(gic_spi(165)),
};
@@ -191,7 +191,7 @@
};
static const struct resource sdhi1_resources[] __initconst = {
- DEFINE_RES_MEM_NAMED(0xee120000, 0x100, "SDHI1"),
+ DEFINE_RES_MEM(0xee120000, 0x100),
DEFINE_RES_IRQ(gic_spi(166)),
};
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index ae88fda..875cf3f 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -19,7 +19,6 @@
*/
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
#include <mach/common.h>
#include <mach/r8a7778.h>
#include <asm/mach/arch.h>
@@ -28,14 +27,6 @@
* see board-bock.c for checking detail of dip-switch
*/
-static const struct pinctrl_map bockw_pinctrl_map[] = {
- /* SCIF0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
- "scif0_data_a", "scif0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
- "scif0_ctrl", "scif0"),
-};
-
#define FPGA 0x18200000
#define IRQ0MR 0x30
#define COMCTLR 0x101c
@@ -45,10 +36,6 @@
r8a7778_clock_init();
r8a7778_init_irq_extpin_dt(1);
-
- pinctrl_register_mappings(bockw_pinctrl_map,
- ARRAY_SIZE(bockw_pinctrl_map));
- r8a7778_pinmux_init();
r8a7778_add_dt_devices();
fpga = ioremap_nocache(FPGA, SZ_1M);
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 38611526..44b55ef 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -25,6 +25,7 @@
#include <linux/mmc/sh_mmcif.h>
#include <linux/mtd/partitions.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/usb-rcar-phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
deleted file mode 100644
index 30c2cc6..0000000
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * kzm9d board support
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- * Copyright (C) 2012 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <mach/common.h>
-#include <mach/emev2.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* Ether */
-static struct resource smsc911x_resources[] = {
- [0] = {
- .start = 0x20000000,
- .end = 0x2000ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = EMEV2_GPIO_IRQ(1),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_platdata = {
- .flags = SMSC911X_USE_32BIT,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-};
-
-static struct platform_device smsc91x_device = {
- .name = "smsc911x",
- .id = -1,
- .dev = {
- .platform_data = &smsc911x_platdata,
- },
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
-};
-
-static struct platform_device *kzm9d_devices[] __initdata = {
- &smsc91x_device,
-};
-
-void __init kzm9d_add_standard_devices(void)
-{
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- emev2_add_standard_devices();
-
- platform_add_devices(kzm9d_devices, ARRAY_SIZE(kzm9d_devices));
-}
-
-static const char *kzm9d_boards_compat_dt[] __initdata = {
- "renesas,kzm9d",
- NULL,
-};
-
-DT_MACHINE_START(KZM9D_DT, "kzm9d")
- .smp = smp_ops(emev2_smp_ops),
- .map_io = emev2_map_io,
- .init_early = emev2_init_delay,
- .init_machine = kzm9d_add_standard_devices,
- .init_late = shmobile_init_late,
- .dt_compat = kzm9d_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c
index 1a1a4a8..7df9ea0 100644
--- a/arch/arm/mach-shmobile/board-lager-reference.c
+++ b/arch/arm/mach-shmobile/board-lager-reference.c
@@ -20,16 +20,15 @@
#include <linux/init.h>
#include <linux/of_platform.h>
+#include <mach/rcar-gen2.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
static void __init lager_add_standard_devices(void)
{
- /* clocks are setup late during boot in the case of DT */
r8a7790_clock_init();
-
r8a7790_add_dt_devices();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *lager_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index a8d3ce6..78a31b6 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -148,7 +148,7 @@
};
static const struct resource mmcif1_resources[] __initconst = {
- DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"),
+ DEFINE_RES_MEM(0xee220000, 0x80),
DEFINE_RES_IRQ(gic_spi(170)),
};
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index da1352f..d832a44 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -29,6 +29,7 @@
#include <linux/leds.h>
#include <linux/dma-mapping.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/rcar-du.h>
#include <linux/platform_data/usb-rcar-phy.h>
@@ -259,10 +260,30 @@
},
};
+/* VIN */
static struct rcar_vin_platform_data vin_platform_data __initdata = {
.flags = RCAR_VIN_BT656,
};
+#define MARZEN_VIN(idx) \
+static struct resource vin##idx##_resources[] __initdata = { \
+ DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
+ DEFINE_RES_IRQ(gic_iid(0x5f + (idx))), \
+}; \
+ \
+static struct platform_device_info vin##idx##_info __initdata = { \
+ .parent = &platform_bus, \
+ .name = "r8a7779-vin", \
+ .id = idx, \
+ .res = vin##idx##_resources, \
+ .num_res = ARRAY_SIZE(vin##idx##_resources), \
+ .dma_mask = DMA_BIT_MASK(32), \
+ .data = &vin_platform_data, \
+ .size_data = sizeof(vin_platform_data), \
+}
+MARZEN_VIN(1);
+MARZEN_VIN(3);
+
#define MARZEN_CAMERA(idx) \
static struct i2c_board_info camera##idx##_info = { \
I2C_BOARD_INFO("adv7180", 0x20 + (idx)), \
@@ -326,8 +347,6 @@
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
"sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
- "sdhi0_wp", "sdhi0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
"intc_irq1_b", "intc"),
@@ -367,8 +386,8 @@
r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
r8a7779_add_standard_devices();
- r8a7779_add_vin_device(1, &vin_platform_data);
- r8a7779_add_vin_device(3, &vin_platform_data);
+ platform_device_register_full(&vin1_info);
+ platform_device_register_full(&vin3_info);
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
marzen_add_du_device();
}
diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c
index 4aba20c..0814a50 100644
--- a/arch/arm/mach-shmobile/clock-r7s72100.c
+++ b/arch/arm/mach-shmobile/clock-r7s72100.c
@@ -170,6 +170,9 @@
CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
/* MSTP clocks */
+ CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
+
+ /* ICK */
CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index 571409b..7348d58 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -584,15 +584,15 @@
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
- CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
+ CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]),
+ CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]),
+ CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
+ CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+ CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index c826bca..dd989f9 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -585,22 +585,23 @@
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]),
+ CLKDEV_DEV_ID("fe1f0000.sound", &mstp_clks[MSTP328]),
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]),
CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]),
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]),
+ CLKDEV_DEV_ID("e6850000.sd", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]),
+ CLKDEV_DEV_ID("e6860000.sd", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]),
+ CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]),
CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]),
CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]),
- CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]),
+ CLKDEV_DEV_ID("e6870000.sd", &mstp_clks[MSTP415]),
/* ICK */
CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index fb6af83..4b601bf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -173,9 +173,13 @@
/* MSTP32 clocks */
CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
+ CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
+ CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
+ CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
+ CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
@@ -183,9 +187,13 @@
CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
+ CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
+ CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
+ CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
+ CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
@@ -195,8 +203,11 @@
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
+ CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
+ CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+ CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 1f7080f..f1fb89b 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -184,9 +184,13 @@
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */
CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
+ CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
+ CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
+ CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
+ CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
@@ -194,12 +198,19 @@
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
+ CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
+ CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
+ CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
+ CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
+ CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
+ CLKDEV_DEV_ID("ffe4e000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */
+ CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP320]), /* SDHI3 */
CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */
};
diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c
index a64f965..c5c60ec 100644
--- a/arch/arm/mach-shmobile/clock-r8a7790.c
+++ b/arch/arm/mach-shmobile/clock-r8a7790.c
@@ -53,6 +53,7 @@
#define SMSTPCR7 0xe615014c
#define SMSTPCR8 0xe6150990
#define SMSTPCR9 0xe6150994
+#define SMSTPCR10 0xe6150998
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
@@ -77,7 +78,7 @@
};
static struct clk main_clk = {
- /* .parent will be set r8a73a4_clock_init */
+ /* .parent will be set r8a7790_clock_init */
.ops = &followparent_clk_ops,
};
@@ -182,10 +183,14 @@
/* MSTP */
enum {
+ MSTP1015, MSTP1014, MSTP1013, MSTP1012, MSTP1011, MSTP1010,
+ MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
MSTP931, MSTP930, MSTP929, MSTP928,
+ MSTP917,
MSTP813,
MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
MSTP717, MSTP716,
+ MSTP704,
MSTP522,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
@@ -194,10 +199,22 @@
};
static struct clk mstp_clks[MSTP_NR] = {
- [MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
+ [MSTP1015] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 15, 0), /* SSI0 */
+ [MSTP1014] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 14, 0), /* SSI1 */
+ [MSTP1013] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 13, 0), /* SSI2 */
+ [MSTP1012] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 12, 0), /* SSI3 */
+ [MSTP1011] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 11, 0), /* SSI4 */
+ [MSTP1010] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 10, 0), /* SSI5 */
+ [MSTP1009] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 9, 0), /* SSI6 */
+ [MSTP1008] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 8, 0), /* SSI7 */
+ [MSTP1007] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 7, 0), /* SSI8 */
+ [MSTP1006] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 6, 0), /* SSI9 */
+ [MSTP1005] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 5, 0), /* SSI ALL */
+ [MSTP931] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 31, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 30, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 29, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 28, 0), /* I2C3 */
+ [MSTP917] = SH_CLK_MSTP32(&qspi_clk, SMSTPCR9, 17, 0), /* QSPI */
[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
@@ -208,6 +225,7 @@
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+ [MSTP704] = SH_CLK_MSTP32(&mp_clk, SMSTPCR7, 4, 0), /* HSUSB */
[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
@@ -262,11 +280,7 @@
CLKDEV_CON_ID("ssprs", &div6_clks[DIV6_SSPRS]),
/* MSTP */
- CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
- CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
- CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
- CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
- CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+ CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP1005]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
@@ -278,24 +292,50 @@
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+ CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+ CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+ CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
+ CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
- CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+ CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
+ CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]),
+ CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]),
+ CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee160000.sdhi", &mstp_clks[MSTP311]),
+ CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
- CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
+ CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+ CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
+ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+
+ /* ICK */
+ CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
+ CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+ CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+ CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+ CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+ CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+ CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
+ CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
+ CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
+ CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP1012]),
+ CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP1011]),
+ CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP1010]),
+ CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP1009]),
+ CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP1008]),
+ CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP1007]),
+ CLKDEV_ICK_ID("ssi.9", "rcar_sound", &mstp_clks[MSTP1006]),
+
};
#define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
@@ -321,10 +361,10 @@
R8A7790_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
break;
case MD(14):
- R8A7790_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+ R8A7790_CLOCK_ROOT(26 / 2, &extal_div2_clk, 200, 240, 122, 102);
break;
case MD(13) | MD(14):
- R8A7790_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+ R8A7790_CLOCK_ROOT(30 / 2, &extal_div2_clk, 172, 208, 106, 88);
break;
}
diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c
index c9a26f1..f546126 100644
--- a/arch/arm/mach-shmobile/clock-r8a7791.c
+++ b/arch/arm/mach-shmobile/clock-r8a7791.c
@@ -103,6 +103,7 @@
SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24);
SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024));
SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
+SH_FIXED_RATIO_CLK_SET(zx_clk, pll1_clk, 1, 3);
static struct clk *main_clks[] = {
&extal_clk,
@@ -116,12 +117,15 @@
&rclk_clk,
&mp_clk,
&cp_clk,
+ &zx_clk,
};
/* MSTP */
enum {
- MSTP721, MSTP720,
+ MSTP813,
+ MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
MSTP719, MSTP718, MSTP715, MSTP714,
+ MSTP522,
MSTP216, MSTP207, MSTP206,
MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
MSTP124,
@@ -129,12 +133,17 @@
};
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
+ [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
+ [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
+ [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
[MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
[MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
[MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
[MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
+ [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
@@ -164,6 +173,9 @@
CLKDEV_CON_ID("peripheral_clk", &hp_clk),
/* MSTP */
+ CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7791", &mstp_clks[MSTP726]),
+ CLKDEV_ICK_ID("du.0", "rcar-du-r8a7791", &mstp_clks[MSTP724]),
+ CLKDEV_ICK_ID("du.1", "rcar-du-r8a7791", &mstp_clks[MSTP723]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
@@ -180,6 +192,9 @@
CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+ CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
};
#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 5390c6b..2848997 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -504,10 +504,6 @@
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
@@ -574,6 +570,11 @@
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */
+ /* ICK */
+ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
+ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1",
&div6_reparent_clks[DIV6_HDMI]),
CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index c92c023..23edf836 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -625,12 +625,6 @@
CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]),
CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]),
CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
- CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
- CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -658,18 +652,19 @@
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
+ CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
- CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */
+ CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
- CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */
+ CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
- CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
+ CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
- CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */
+ CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP311]), /* SDHI2 */
CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */
CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */
CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */
@@ -680,6 +675,14 @@
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+
+ /* ICK */
+ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
+ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
};
void __init sh73a0_clock_init(void)
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index c2eb756..fcb142a 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -3,12 +3,7 @@
extern void emev2_map_io(void);
extern void emev2_init_delay(void);
-extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
-
-#define EMEV2_GPIO_BASE 200
-#define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))
-
extern struct smp_operations emev2_smp_ops;
#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index 441886c..f4076a5 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -20,13 +20,50 @@
#define __ASM_R8A7778_H__
#include <linux/sh_eth.h>
-#include <linux/platform_data/camera-rcar.h>
/* HPB-DMA slave IDs */
enum {
HPBDMA_SLAVE_DUMMY,
HPBDMA_SLAVE_SDHI0_TX,
HPBDMA_SLAVE_SDHI0_RX,
+ HPBDMA_SLAVE_SSI0_TX,
+ HPBDMA_SLAVE_SSI0_RX,
+ HPBDMA_SLAVE_SSI1_TX,
+ HPBDMA_SLAVE_SSI1_RX,
+ HPBDMA_SLAVE_SSI2_TX,
+ HPBDMA_SLAVE_SSI2_RX,
+ HPBDMA_SLAVE_SSI3_TX,
+ HPBDMA_SLAVE_SSI3_RX,
+ HPBDMA_SLAVE_SSI4_TX,
+ HPBDMA_SLAVE_SSI4_RX,
+ HPBDMA_SLAVE_SSI5_TX,
+ HPBDMA_SLAVE_SSI5_RX,
+ HPBDMA_SLAVE_SSI6_TX,
+ HPBDMA_SLAVE_SSI6_RX,
+ HPBDMA_SLAVE_SSI7_TX,
+ HPBDMA_SLAVE_SSI7_RX,
+ HPBDMA_SLAVE_SSI8_TX,
+ HPBDMA_SLAVE_SSI8_RX,
+ HPBDMA_SLAVE_HPBIF0_TX,
+ HPBDMA_SLAVE_HPBIF0_RX,
+ HPBDMA_SLAVE_HPBIF1_TX,
+ HPBDMA_SLAVE_HPBIF1_RX,
+ HPBDMA_SLAVE_HPBIF2_TX,
+ HPBDMA_SLAVE_HPBIF2_RX,
+ HPBDMA_SLAVE_HPBIF3_TX,
+ HPBDMA_SLAVE_HPBIF3_RX,
+ HPBDMA_SLAVE_HPBIF4_TX,
+ HPBDMA_SLAVE_HPBIF4_RX,
+ HPBDMA_SLAVE_HPBIF5_TX,
+ HPBDMA_SLAVE_HPBIF5_RX,
+ HPBDMA_SLAVE_HPBIF6_TX,
+ HPBDMA_SLAVE_HPBIF6_RX,
+ HPBDMA_SLAVE_HPBIF7_TX,
+ HPBDMA_SLAVE_HPBIF7_RX,
+ HPBDMA_SLAVE_HPBIF8_TX,
+ HPBDMA_SLAVE_HPBIF8_RX,
+ HPBDMA_SLAVE_USBFUNC_TX,
+ HPBDMA_SLAVE_USBFUNC_RX,
};
extern void r8a7778_add_standard_devices(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 17af34e..5014145 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -3,8 +3,6 @@
#include <linux/sh_clk.h>
#include <linux/pm_domain.h>
-#include <linux/sh_eth.h>
-#include <linux/platform_data/camera-rcar.h>
/* HPB-DMA slave IDs */
enum {
@@ -40,9 +38,6 @@
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_add_standard_devices_dt(void);
-extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7779_add_vin_device(int idx,
- struct rcar_vin_platform_data *pdata);
extern void r8a7779_init_late(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h
index 051ead3..200fa69 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7791.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h
@@ -4,6 +4,7 @@
void r8a7791_add_standard_devices(void);
void r8a7791_add_dt_devices(void);
void r8a7791_clock_init(void);
+void r8a7791_pinmux_init(void);
void r8a7791_init_early(void);
extern struct smp_operations r8a7791_smp_ops;
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 3ad531c..c8f2a1a 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -16,24 +16,15 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-em.h>
#include <linux/of_platform.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/emev2.h>
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/time.h>
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
@@ -52,150 +43,20 @@
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
-/* UART */
-static struct resource uart0_resources[] = {
- DEFINE_RES_MEM(0xe1020000, 0x38),
- DEFINE_RES_IRQ(40),
-};
-
-static struct resource uart1_resources[] = {
- DEFINE_RES_MEM(0xe1030000, 0x38),
- DEFINE_RES_IRQ(41),
-};
-
-static struct resource uart2_resources[] = {
- DEFINE_RES_MEM(0xe1040000, 0x38),
- DEFINE_RES_IRQ(42),
-};
-
-static struct resource uart3_resources[] = {
- DEFINE_RES_MEM(0xe1050000, 0x38),
- DEFINE_RES_IRQ(43),
-};
-
-#define emev2_register_uart(idx) \
- platform_device_register_simple("serial8250-em", idx, \
- uart##idx##_resources, \
- ARRAY_SIZE(uart##idx##_resources))
-
-/* STI */
-static struct resource sti_resources[] = {
- DEFINE_RES_MEM(0xe0180000, 0x54),
- DEFINE_RES_IRQ(157),
-};
-
-#define emev2_register_sti() \
- platform_device_register_simple("em_sti", 0, \
- sti_resources, \
- ARRAY_SIZE(sti_resources))
-
-/* GIO */
-static struct gpio_em_config gio0_config = {
- .gpio_base = 0,
- .irq_base = EMEV2_GPIO_IRQ(0),
- .number_of_pins = 32,
-};
-
-static struct resource gio0_resources[] = {
- DEFINE_RES_MEM(0xe0050000, 0x2c),
- DEFINE_RES_MEM(0xe0050040, 0x20),
- DEFINE_RES_IRQ(99),
- DEFINE_RES_IRQ(100),
-};
-
-static struct gpio_em_config gio1_config = {
- .gpio_base = 32,
- .irq_base = EMEV2_GPIO_IRQ(32),
- .number_of_pins = 32,
-};
-
-static struct resource gio1_resources[] = {
- DEFINE_RES_MEM(0xe0050080, 0x2c),
- DEFINE_RES_MEM(0xe00500c0, 0x20),
- DEFINE_RES_IRQ(101),
- DEFINE_RES_IRQ(102),
-};
-
-static struct gpio_em_config gio2_config = {
- .gpio_base = 64,
- .irq_base = EMEV2_GPIO_IRQ(64),
- .number_of_pins = 32,
-};
-
-static struct resource gio2_resources[] = {
- DEFINE_RES_MEM(0xe0050100, 0x2c),
- DEFINE_RES_MEM(0xe0050140, 0x20),
- DEFINE_RES_IRQ(103),
- DEFINE_RES_IRQ(104),
-};
-
-static struct gpio_em_config gio3_config = {
- .gpio_base = 96,
- .irq_base = EMEV2_GPIO_IRQ(96),
- .number_of_pins = 32,
-};
-
-static struct resource gio3_resources[] = {
- DEFINE_RES_MEM(0xe0050180, 0x2c),
- DEFINE_RES_MEM(0xe00501c0, 0x20),
- DEFINE_RES_IRQ(105),
- DEFINE_RES_IRQ(106),
-};
-
-static struct gpio_em_config gio4_config = {
- .gpio_base = 128,
- .irq_base = EMEV2_GPIO_IRQ(128),
- .number_of_pins = 31,
-};
-
-static struct resource gio4_resources[] = {
- DEFINE_RES_MEM(0xe0050200, 0x2c),
- DEFINE_RES_MEM(0xe0050240, 0x20),
- DEFINE_RES_IRQ(107),
- DEFINE_RES_IRQ(108),
-};
-
-#define emev2_register_gio(idx) \
- platform_device_register_resndata(&platform_bus, "em_gio", \
- idx, gio##idx##_resources, \
- ARRAY_SIZE(gio##idx##_resources), \
- &gio##idx##_config, \
- sizeof(struct gpio_em_config))
-
-static struct resource pmu_resources[] = {
- DEFINE_RES_IRQ(152),
- DEFINE_RES_IRQ(153),
-};
-
-#define emev2_register_pmu() \
- platform_device_register_simple("arm-pmu", -1, \
- pmu_resources, \
- ARRAY_SIZE(pmu_resources))
-
-void __init emev2_add_standard_devices(void)
-{
- if (!IS_ENABLED(CONFIG_COMMON_CLK))
- emev2_clock_init();
-
- emev2_register_uart(0);
- emev2_register_uart(1);
- emev2_register_uart(2);
- emev2_register_uart(3);
- emev2_register_sti();
- emev2_register_gio(0);
- emev2_register_gio(1);
- emev2_register_gio(2);
- emev2_register_gio(3);
- emev2_register_gio(4);
- emev2_register_pmu();
-}
-
void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
-#ifdef CONFIG_USE_OF
+static void __init emev2_add_standard_devices_dt(void)
+{
+#ifdef CONFIG_COMMON_CLK
+ of_clk_init(NULL);
+#else
+ emev2_clock_init();
+#endif
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
static const char *emev2_boards_compat_dt[] __initdata = {
"renesas,emev2",
@@ -206,7 +67,7 @@
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_init_delay,
+ .init_machine = emev2_add_standard_devices_dt,
+ .init_late = shmobile_init_late,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
-
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index d4eb509..55f0b9c 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r7s72100.h>
@@ -58,6 +59,26 @@
sizeof(struct plat_sci_port));
}
+
+static struct sh_timer_config mtu2_0_platform_data __initdata = {
+ .name = "MTU2_0",
+ .timer_bit = 0,
+ .channel_offset = -0x80,
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] __initdata = {
+ DEFINE_RES_MEM(0xfcff0300, 0x27),
+ DEFINE_RES_IRQ(gic_iid(139)), /* MTU2 TGI0A */
+};
+
+#define r7s72100_register_mtu2(idx) \
+ platform_device_register_resndata(&platform_bus, "sh_mtu2", \
+ idx, mtu2_##idx##_resources, \
+ ARRAY_SIZE(mtu2_##idx##_resources), \
+ &mtu2_##idx##_platform_data, \
+ sizeof(struct sh_timer_config))
+
void __init r7s72100_add_dt_devices(void)
{
r7s72100_register_scif(SCIF0);
@@ -68,6 +89,7 @@
r7s72100_register_scif(SCIF5);
r7s72100_register_scif(SCIF6);
r7s72100_register_scif(SCIF7);
+ r7s72100_register_mtu2(0);
}
void __init r7s72100_init_early(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index b0f2749..cc94b64 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -275,7 +275,7 @@
static struct resource dma_resources[] = {
DEFINE_RES_MEM(0xe6700020, 0x89e0),
- DEFINE_RES_IRQ_NAMED(gic_spi(220), "error_irq"),
+ DEFINE_RES_IRQ(gic_spi(220)),
{
/* IRQ for channels 0-19 */
.start = gic_spi(200),
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 03fcc59..7ea6308 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -319,6 +319,52 @@
#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */
#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
+#define HPBDMA_SSI(_id) \
+{ \
+ .id = HPBDMA_SLAVE_SSI## _id ##_TX, \
+ .addr = 0xffd91008 + (_id * 0x40), \
+ .dcr = HPB_DMAE_DCR_CT | \
+ HPB_DMAE_DCR_DIP | \
+ HPB_DMAE_DCR_SPDS_32BIT | \
+ HPB_DMAE_DCR_DMDL | \
+ HPB_DMAE_DCR_DPDS_32BIT, \
+ .port = _id + (_id << 8), \
+ .dma_ch = (28 + _id), \
+}, { \
+ .id = HPBDMA_SLAVE_SSI## _id ##_RX, \
+ .addr = 0xffd9100c + (_id * 0x40), \
+ .dcr = HPB_DMAE_DCR_CT | \
+ HPB_DMAE_DCR_DIP | \
+ HPB_DMAE_DCR_SMDL | \
+ HPB_DMAE_DCR_SPDS_32BIT | \
+ HPB_DMAE_DCR_DPDS_32BIT, \
+ .port = _id + (_id << 8), \
+ .dma_ch = (28 + _id), \
+}
+
+#define HPBDMA_HPBIF(_id) \
+{ \
+ .id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \
+ .addr = 0xffda0000 + (_id * 0x1000), \
+ .dcr = HPB_DMAE_DCR_CT | \
+ HPB_DMAE_DCR_DIP | \
+ HPB_DMAE_DCR_SPDS_32BIT | \
+ HPB_DMAE_DCR_DMDL | \
+ HPB_DMAE_DCR_DPDS_32BIT, \
+ .port = 0x1111, \
+ .dma_ch = (28 + _id), \
+}, { \
+ .id = HPBDMA_SLAVE_HPBIF## _id ##_RX, \
+ .addr = 0xffda0000 + (_id * 0x1000), \
+ .dcr = HPB_DMAE_DCR_CT | \
+ HPB_DMAE_DCR_DIP | \
+ HPB_DMAE_DCR_SMDL | \
+ HPB_DMAE_DCR_SPDS_32BIT | \
+ HPB_DMAE_DCR_DPDS_32BIT, \
+ .port = 0x1111, \
+ .dma_ch = (28 + _id), \
+}
+
static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
{
.id = HPBDMA_SLAVE_SDHI0_TX,
@@ -348,12 +394,86 @@
.port = 0x0D0C,
.flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
.dma_ch = 22,
+ }, {
+ .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
+ .addr = 0xffe60018,
+ .dcr = HPB_DMAE_DCR_SPDS_32BIT |
+ HPB_DMAE_DCR_DMDL |
+ HPB_DMAE_DCR_DPDS_32BIT,
+ .port = 0x0000,
+ .dma_ch = 14,
+ }, {
+ .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
+ .addr = 0xffe6001c,
+ .dcr = HPB_DMAE_DCR_SMDL |
+ HPB_DMAE_DCR_SPDS_32BIT |
+ HPB_DMAE_DCR_DPDS_32BIT,
+ .port = 0x0101,
+ .dma_ch = 15,
},
+
+ HPBDMA_SSI(0),
+ HPBDMA_SSI(1),
+ HPBDMA_SSI(2),
+ HPBDMA_SSI(3),
+ HPBDMA_SSI(4),
+ HPBDMA_SSI(5),
+ HPBDMA_SSI(6),
+ HPBDMA_SSI(7),
+ HPBDMA_SSI(8),
+
+ HPBDMA_HPBIF(0),
+ HPBDMA_HPBIF(1),
+ HPBDMA_HPBIF(2),
+ HPBDMA_HPBIF(3),
+ HPBDMA_HPBIF(4),
+ HPBDMA_HPBIF(5),
+ HPBDMA_HPBIF(6),
+ HPBDMA_HPBIF(7),
+ HPBDMA_HPBIF(8),
};
static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+ HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
+ HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
+ HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
};
static struct hpb_dmae_pdata dma_platform_data __initdata = {
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 13049e9..8f94531 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -598,45 +598,6 @@
.resource = ohci1_resources,
};
-/* Ether */
-static struct resource ether_resources[] __initdata = {
- {
- .start = 0xfde00000,
- .end = 0xfde003ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = gic_iid(0xb4),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define R8A7779_VIN(idx) \
-static struct resource vin##idx##_resources[] __initdata = { \
- DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
- DEFINE_RES_IRQ(gic_iid(0x5f + (idx))), \
-}; \
- \
-static struct platform_device_info vin##idx##_info __initdata = { \
- .parent = &platform_bus, \
- .name = "r8a7779-vin", \
- .id = idx, \
- .res = vin##idx##_resources, \
- .num_res = ARRAY_SIZE(vin##idx##_resources), \
- .dma_mask = DMA_BIT_MASK(32), \
-}
-
-R8A7779_VIN(0);
-R8A7779_VIN(1);
-R8A7779_VIN(2);
-R8A7779_VIN(3);
-
-static struct platform_device_info *vin_info_table[] __initdata = {
- &vin0_info,
- &vin1_info,
- &vin2_info,
- &vin3_info,
-};
-
/* HPB-DMA */
/* Asynchronous mode register bits */
@@ -825,24 +786,6 @@
r8a7779_register_hpb_dmae();
}
-void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
-{
- platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
- ether_resources,
- ARRAY_SIZE(ether_resources),
- pdata, sizeof(*pdata));
-}
-
-void __init r8a7779_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
-{
- BUG_ON(id < 0 || id > 3);
-
- vin_info_table[id]->data = pdata;
- vin_info_table[id]->size_data = sizeof(*pdata);
-
- platform_device_register_full(vin_info_table[id]);
-}
-
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak r8a7779_register_twd(void) { }
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index c47bcebb..8474818 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -34,6 +34,10 @@
DEFINE_RES_MEM(0xe6060000, 0x250),
};
+#define r8a7790_register_pfc() \
+ platform_device_register_simple("pfc-r8a7790", -1, pfc_resources, \
+ ARRAY_SIZE(pfc_resources))
+
#define R8A7790_GPIO(idx) \
static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \
@@ -63,16 +67,40 @@
&r8a7790_gpio##idx##_platform_data, \
sizeof(r8a7790_gpio##idx##_platform_data))
+static struct resource i2c_resources[] __initdata = {
+ /* I2C0 */
+ DEFINE_RES_MEM(0xE6508000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(287)),
+ /* I2C1 */
+ DEFINE_RES_MEM(0xE6518000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(288)),
+ /* I2C2 */
+ DEFINE_RES_MEM(0xE6530000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(286)),
+ /* I2C3 */
+ DEFINE_RES_MEM(0xE6540000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(290)),
+
+};
+
+#define r8a7790_register_i2c(idx) \
+ platform_device_register_simple( \
+ "i2c-rcar", idx, \
+ i2c_resources + (2 * idx), 2); \
+
void __init r8a7790_pinmux_init(void)
{
- platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
- ARRAY_SIZE(pfc_resources));
+ r8a7790_register_pfc();
r8a7790_register_gpio(0);
r8a7790_register_gpio(1);
r8a7790_register_gpio(2);
r8a7790_register_gpio(3);
r8a7790_register_gpio(4);
r8a7790_register_gpio(5);
+ r8a7790_register_i2c(0);
+ r8a7790_register_i2c(1);
+ r8a7790_register_i2c(2);
+ r8a7790_register_i2c(3);
}
#define SCIF_COMMON(scif_type, baseaddr, irq) \
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index d9393d6..cddca99 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -22,6 +22,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
@@ -31,6 +32,58 @@
#include <mach/rcar-gen2.h>
#include <asm/mach/arch.h>
+static const struct resource pfc_resources[] __initconst = {
+ DEFINE_RES_MEM(0xe6060000, 0x250),
+};
+
+#define r8a7791_register_pfc() \
+ platform_device_register_simple("pfc-r8a7791", -1, pfc_resources, \
+ ARRAY_SIZE(pfc_resources))
+
+#define R8A7791_GPIO(idx, base, nr) \
+static const struct resource r8a7791_gpio##idx##_resources[] __initconst = { \
+ DEFINE_RES_MEM((base), 0x50), \
+ DEFINE_RES_IRQ(gic_spi(4 + (idx))), \
+}; \
+ \
+static const struct gpio_rcar_config \
+r8a7791_gpio##idx##_platform_data __initconst = { \
+ .gpio_base = 32 * (idx), \
+ .irq_base = 0, \
+ .number_of_pins = (nr), \
+ .pctl_name = "pfc-r8a7791", \
+ .has_both_edge_trigger = 1, \
+}; \
+
+R8A7791_GPIO(0, 0xe6050000, 32);
+R8A7791_GPIO(1, 0xe6051000, 32);
+R8A7791_GPIO(2, 0xe6052000, 32);
+R8A7791_GPIO(3, 0xe6053000, 32);
+R8A7791_GPIO(4, 0xe6054000, 32);
+R8A7791_GPIO(5, 0xe6055000, 32);
+R8A7791_GPIO(6, 0xe6055400, 32);
+R8A7791_GPIO(7, 0xe6055800, 26);
+
+#define r8a7791_register_gpio(idx) \
+ platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
+ r8a7791_gpio##idx##_resources, \
+ ARRAY_SIZE(r8a7791_gpio##idx##_resources), \
+ &r8a7791_gpio##idx##_platform_data, \
+ sizeof(r8a7791_gpio##idx##_platform_data))
+
+void __init r8a7791_pinmux_init(void)
+{
+ r8a7791_register_pfc();
+ r8a7791_register_gpio(0);
+ r8a7791_register_gpio(1);
+ r8a7791_register_gpio(2);
+ r8a7791_register_gpio(3);
+ r8a7791_register_gpio(4);
+ r8a7791_register_gpio(5);
+ r8a7791_register_gpio(6);
+ r8a7791_register_gpio(7);
+}
+
#define SCIF_COMMON(scif_type, baseaddr, irq) \
.type = scif_type, \
.mapbase = baseaddr, \
@@ -136,6 +189,17 @@
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
+static const struct resource thermal_resources[] __initconst = {
+ DEFINE_RES_MEM(0xe61f0000, 0x14),
+ DEFINE_RES_MEM(0xe61f0100, 0x38),
+ DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7791_register_thermal() \
+ platform_device_register_simple("rcar_thermal", -1, \
+ thermal_resources, \
+ ARRAY_SIZE(thermal_resources))
+
void __init r8a7791_add_dt_devices(void)
{
r8a7791_register_scif(SCIFA0);
@@ -160,6 +224,7 @@
{
r8a7791_add_dt_devices();
r8a7791_register_irqc(0);
+ r8a7791_register_thermal();
}
void __init r8a7791_init_early(void)
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 5734c24..69ccc6c6 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/clk/shmobile.h>
#include <linux/clocksource.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -44,8 +45,10 @@
void __init rcar_gen2_timer_init(void)
{
-#ifdef CONFIG_ARM_ARCH_TIMER
+#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
u32 mode = rcar_gen2_read_mode_pins();
+#endif
+#ifdef CONFIG_ARM_ARCH_TIMER
void __iomem *base;
int extal_mhz = 0;
u32 freq;
@@ -78,14 +81,28 @@
/* Remap "armgcnt address map" space */
base = ioremap(0xe6080000, PAGE_SIZE);
- /* Update registers with correct frequency */
- iowrite32(freq, base + CNTFID0);
- asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+ /*
+ * Update the timer if it is either not running, or is not at the
+ * right frequency. The timer is only configurable in secure mode
+ * so this avoids an abort if the loader started the timer and
+ * entered the kernel in non-secure mode.
+ */
- /* make sure arch timer is started by setting bit 0 of CNTCR */
- iowrite32(1, base + CNTCR);
+ if ((ioread32(base + CNTCR) & 1) == 0 ||
+ ioread32(base + CNTFID0) != freq) {
+ /* Update registers with correct frequency */
+ iowrite32(freq, base + CNTFID0);
+ asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+ /* make sure arch timer is started by setting bit 0 of CNTCR */
+ iowrite32(1, base + CNTCR);
+ }
+
iounmap(base);
#endif /* CONFIG_ARM_ARCH_TIMER */
+#ifdef CONFIG_COMMON_CLK
+ rcar_gen2_clocks_init(mode);
+#endif
clocksource_of_init();
}
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 22de174..65151c4 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -273,7 +273,7 @@
};
static struct resource tmu00_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xfff60008, 0xc, "TMU00"),
+ [0] = DEFINE_RES_MEM(0xfff60008, 0xc),
[1] = {
.start = intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */
.flags = IORESOURCE_IRQ,
@@ -298,7 +298,7 @@
};
static struct resource tmu01_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xfff60014, 0xc, "TMU00"),
+ [0] = DEFINE_RES_MEM(0xfff60014, 0xc),
[1] = {
.start = intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */
.flags = IORESOURCE_IRQ,
@@ -316,7 +316,7 @@
};
static struct resource i2c0_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6820000, 0x426, "IIC0"),
+ [0] = DEFINE_RES_MEM(0xe6820000, 0x426),
[1] = {
.start = gic_spi(167),
.end = gic_spi(170),
@@ -325,7 +325,7 @@
};
static struct resource i2c1_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6822000, 0x426, "IIC1"),
+ [0] = DEFINE_RES_MEM(0xe6822000, 0x426),
[1] = {
.start = gic_spi(51),
.end = gic_spi(54),
@@ -334,7 +334,7 @@
};
static struct resource i2c2_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6824000, 0x426, "IIC2"),
+ [0] = DEFINE_RES_MEM(0xe6824000, 0x426),
[1] = {
.start = gic_spi(171),
.end = gic_spi(174),
@@ -343,7 +343,7 @@
};
static struct resource i2c3_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6826000, 0x426, "IIC3"),
+ [0] = DEFINE_RES_MEM(0xe6826000, 0x426),
[1] = {
.start = gic_spi(183),
.end = gic_spi(186),
@@ -352,7 +352,7 @@
};
static struct resource i2c4_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6828000, 0x426, "IIC4"),
+ [0] = DEFINE_RES_MEM(0xe6828000, 0x426),
[1] = {
.start = gic_spi(187),
.end = gic_spi(190),
@@ -722,7 +722,7 @@
/* an IPMMU module for ICB */
static struct resource ipmmu_resources[] = {
- DEFINE_RES_MEM_NAMED(0xfe951000, 0x100, "IPMMU"),
+ DEFINE_RES_MEM(0xfe951000, 0x100),
};
static const char * const ipmmu_dev_names[] = {
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 09e740f..15c0929 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -14,6 +14,8 @@
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PINCTRL
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
select SOC_BUS
select SPARSE_IRQ
select USB_ARCH_HAS_EHCI if USB_SUPPORT
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 85d28e7..f6f5b54 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -25,6 +25,7 @@
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/reset.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/clk/tegra.h>
@@ -144,11 +145,12 @@
}
/* Must be called with clk disabled, and returns with clk enabled */
-int tegra_powergate_sequence_power_up(int id, struct clk *clk)
+int tegra_powergate_sequence_power_up(int id, struct clk *clk,
+ struct reset_control *rst)
{
int ret;
- tegra_periph_reset_assert(clk);
+ reset_control_assert(rst);
ret = tegra_powergate_power_on(id);
if (ret)
@@ -165,7 +167,7 @@
goto err_clamp;
udelay(10);
- tegra_periph_reset_deassert(clk);
+ reset_control_deassert(rst);
return 0;
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 616b96e..d05ba75 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,10 +2,10 @@
# Makefile for the linux kernel, U8500 machine.
#
-obj-y := cpu.o devices.o id.o timer.o pm.o
+obj-y := cpu.o id.o timer.o pm.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o
+obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-pins.o \
board-mop500-audio.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 154e15f..dc7f901 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,16 +7,13 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/platform_data/dma-ste-dma40.h>
-#include "devices.h"
#include "irqs.h"
#include <linux/platform_data/asoc-ux500-msp.h>
#include "ste-dma40-db8500.h"
#include "board-mop500.h"
-#include "devices-db8500.h"
static struct stedma40_chan_cfg msp0_dma_rx = {
.high_priority = true,
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 0efb156..f63619b 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -10,94 +10,18 @@
#include <linux/string.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
#include "board-mop500.h"
-enum custom_pin_cfg_t {
- PINS_FOR_DEFAULT,
- PINS_FOR_U9500,
-};
-
-static enum custom_pin_cfg_t pinsfor;
-
/* These simply sets bias for pins */
#define BIAS(a,b) static unsigned long a[] = { b }
-BIAS(pd, PIN_PULL_DOWN);
-BIAS(in_nopull, PIN_INPUT_NOPULL);
-BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE);
-BIAS(in_pu, PIN_INPUT_PULLUP);
-BIAS(in_pd, PIN_INPUT_PULLDOWN);
-BIAS(out_hi, PIN_OUTPUT_HIGH);
-BIAS(out_lo, PIN_OUTPUT_LOW);
-BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
-
BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
-/* These also force them into GPIO mode */
-BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
-BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL);
-BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
-BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
-/* Sleep modes */
-BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
- PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
- PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW|
- PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
- PIN_SLPM_PDIS_ENABLED);
-BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
- PIN_SLPM_PDIS_DISABLED);
-BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|
- PIN_SLPM_PDIS_DISABLED);
-
-/* We use these to define hog settings that are always done on boot */
-#define DB8500_MUX_HOG(group,func) \
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
-#define DB8500_PIN_HOG(pin,conf) \
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
-
-/* These are default states associated with device and changed runtime */
-#define DB8500_MUX(group,func,dev) \
- PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
-#define DB8500_PIN(pin,conf,dev) \
- PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
-#define DB8500_PIN_IDLE(pin, conf, dev) \
- PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \
- pin, conf)
-#define DB8500_PIN_SLEEP(pin, conf, dev) \
- PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
- pin, conf)
-#define DB8500_MUX_STATE(group, func, dev, state) \
- PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func)
-#define DB8500_PIN_STATE(pin, conf, dev, state) \
- PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf)
-
#define AB8500_MUX_HOG(group, func) \
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
#define AB8500_PIN_HOG(pin, conf) \
@@ -344,725 +268,8 @@
AB8505_PIN_HOG("GPIO53_D15", in_pd),
};
-/* Pin control settings */
-static struct pinctrl_map __initdata mop500_family_pinmap[] = {
- /*
- * uMSP0, mux in 4 pins, regular placement of RX/TX
- * explicitly set the pins to no pull
- */
- DB8500_MUX_HOG("msp0txrx_a_1", "msp0"),
- DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"),
- DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */
- DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */
- DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */
- DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */
- /* MSP2 for HDMI, pull down TXD, TCK, TFS */
- DB8500_MUX_HOG("msp2_a_1", "msp2"),
- DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */
- DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */
- DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */
- DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */
- /*
- * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
- * pull-up
- * TODO: is this really correct? Snowball doesn't have a LCD.
- */
- DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
- DB8500_PIN_HOG("GPIO68_E1", in_pu),
- DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
- /*
- * STMPE1601/tc35893 keypad IRQ GPIO 218
- * TODO: set for snowball and HREF really??
- */
- DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
- /*
- * UART0, we do not mux in u0 here.
- * uart-0 pins gpio configuration should be kept intact to prevent
- * a glitch in tx line when the tty dev is opened. Later these pins
- * are configured by uart driver
- */
- DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */
- DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */
- DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */
- DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */
- /*
- * Mux in UART2 on altfunction C and set pull-ups.
- * TODO: is this used on U8500 variants and Snowball really?
- * The setting on GPIO31 conflicts with magnetometer use on hrefv60
- */
- /* default state for UART2 */
- DB8500_MUX("u2rxtx_c_1", "u2", "uart2"),
- DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */
- DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */
- /* Sleep state for UART2 */
- DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"),
- DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"),
- /*
- * The following pin sets were known as "runtime pins" before being
- * converted to the pinctrl model. Here we model them as "default"
- * states.
- */
- /* Mux in UART0 after initialization */
- DB8500_MUX("u0_a_1", "u0", "uart0"),
- DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */
- DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */
- DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */
- DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */
- /* Sleep state for UART0 */
- DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"),
- DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"),
- DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"),
- DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"),
- /* Mux in UART1 after initialization */
- DB8500_MUX("u1rxtx_a_1", "u1", "uart1"),
- DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */
- DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */
- /* Sleep state for UART1 */
- DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"),
- DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"),
- /* MSP1 for ALSA codec */
- DB8500_MUX_HOG("msp1txrx_a_1", "msp1"),
- DB8500_MUX_HOG("msp1_a_1", "msp1"),
- DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup),
- DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup),
- DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup),
- DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup),
- /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
- DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
- DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
- /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
- DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
- DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
- /* LCD VSI1 sleep state */
- DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
- /* Mux in i2c0 block, default state */
- DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"),
- /* i2c0 sleep state */
- DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */
- DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */
- /* Mux in i2c1 block, default state */
- DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"),
- /* i2c1 sleep state */
- DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */
- DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */
- /* Mux in i2c2 block, default state */
- DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"),
- /* i2c2 sleep state */
- DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */
- DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */
- /* Mux in i2c3 block, default state */
- DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"),
- /* i2c3 sleep state */
- DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */
- DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */
- /* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
- DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
- DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
- DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */
- DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */
- DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */
- DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */
- DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */
- DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */
- DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
- DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
- DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
- /* SDI0 sleep state */
- DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"),
- DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"),
-
- /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
- DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
- DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
- DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */
- DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */
- DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */
- DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
- DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
- DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
- /* SDI1 sleep state */
- DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */
- DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */
- DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */
- DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */
- DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */
- DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */
- DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */
-
- /* Mux in SDI2 (here called MC2) used for for PoP eMMC */
- DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
- DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
- DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */
- DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */
- DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */
- DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */
- DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */
- DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */
- DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */
- DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
- DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
- DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
- /* SDI2 sleep state */
- DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */
- DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */
- DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */
- DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */
- DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */
- DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */
- DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */
- DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */
- DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */
- DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */
- DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */
-
- /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
- DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
- DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
- DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */
- DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */
- DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */
- DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */
- DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */
- DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */
- DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */
- DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
- DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
- DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
- /*SDI4 sleep state */
- DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */
- DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */
- DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */
- DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */
- DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */
- DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */
- DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */
- DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */
- DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */
- DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */
- DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
-
- /* Mux in USB pins, drive STP high */
- /* USB default state */
- DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"),
- DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */
- /* USB sleep state */
- DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */
- DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */
- DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */
- DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */
- DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */
- DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */
- DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */
- DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */
- DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */
- DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */
- DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */
- DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */
-
- /* Mux in SPI2 pins on the "other C1" altfunction */
- DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
- DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
- DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
- DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
- DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
- /* SPI2 idle state */
- DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
- DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
- DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
- /* SPI2 sleep state */
- DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
- DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
- DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
- DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
-
- /* ske default state */
- DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
- DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */
- DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */
- DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */
- DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */
- DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */
- DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */
- DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */
- DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */
- DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
- DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
- DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
- DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
- DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
- DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
- DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
- DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
- /* ske sleep state */
- DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
- DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
- DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
- DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
- DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
- DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
- DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
- DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
- DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
- DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
- DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
- DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
- DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
- DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
- DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
- DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
-
- /* STM APE pins states */
- DB8500_MUX_STATE("stmape_c_1", "stmape",
- "stm", "ape_mipi34"),
- DB8500_PIN_STATE("GPIO70_G5", in_nopull,
- "stm", "ape_mipi34"), /* clk */
- DB8500_PIN_STATE("GPIO71_G4", in_nopull,
- "stm", "ape_mipi34"), /* dat3 */
- DB8500_PIN_STATE("GPIO72_H4", in_nopull,
- "stm", "ape_mipi34"), /* dat2 */
- DB8500_PIN_STATE("GPIO73_H3", in_nopull,
- "stm", "ape_mipi34"), /* dat1 */
- DB8500_PIN_STATE("GPIO74_J3", in_nopull,
- "stm", "ape_mipi34"), /* dat0 */
-
- DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
- "stm", "ape_mipi34_sleep"), /* clk */
- DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
- "stm", "ape_mipi34_sleep"), /* dat3 */
- DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
- "stm", "ape_mipi34_sleep"), /* dat2 */
- DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
- "stm", "ape_mipi34_sleep"), /* dat1 */
- DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
- "stm", "ape_mipi34_sleep"), /* dat0 */
-
- DB8500_MUX_STATE("stmape_oc1_1", "stmape",
- "stm", "ape_microsd"),
- DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
- "stm", "ape_microsd"), /* clk */
- DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
- "stm", "ape_microsd"), /* dat0 */
- DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
- "stm", "ape_microsd"), /* dat1 */
- DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
- "stm", "ape_microsd"), /* dat2 */
- DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
- "stm", "ape_microsd"), /* dat3 */
-
- DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
- "stm", "ape_microsd_sleep"), /* clk */
- DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
- "stm", "ape_microsd_sleep"), /* dat0 */
- DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
- "stm", "ape_microsd_sleep"), /* dat1 */
- DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
- "stm", "ape_microsd_sleep"), /* dat2 */
- DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
- "stm", "ape_microsd_sleep"), /* dat3 */
-
- /* STM Modem pins states */
- DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
- "stm", "mod_mipi34"),
- DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
- "stm", "mod_mipi34"),
- DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
- "stm", "mod_mipi34"),
- DB8500_PIN_STATE("GPIO70_G5", in_nopull,
- "stm", "mod_mipi34"), /* clk */
- DB8500_PIN_STATE("GPIO71_G4", in_nopull,
- "stm", "mod_mipi34"), /* dat3 */
- DB8500_PIN_STATE("GPIO72_H4", in_nopull,
- "stm", "mod_mipi34"), /* dat2 */
- DB8500_PIN_STATE("GPIO73_H3", in_nopull,
- "stm", "mod_mipi34"), /* dat1 */
- DB8500_PIN_STATE("GPIO74_J3", in_nopull,
- "stm", "mod_mipi34"), /* dat0 */
- DB8500_PIN_STATE("GPIO75_H2", in_pu,
- "stm", "mod_mipi34"), /* uartmod rx */
- DB8500_PIN_STATE("GPIO76_J2", out_lo,
- "stm", "mod_mipi34"), /* uartmod tx */
-
- DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
- "stm", "mod_mipi34_sleep"), /* clk */
- DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
- "stm", "mod_mipi34_sleep"), /* dat3 */
- DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
- "stm", "mod_mipi34_sleep"), /* dat2 */
- DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
- "stm", "mod_mipi34_sleep"), /* dat1 */
- DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
- "stm", "mod_mipi34_sleep"), /* dat0 */
- DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
- "stm", "mod_mipi34_sleep"), /* uartmod rx */
- DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
- "stm", "mod_mipi34_sleep"), /* uartmod tx */
-
- DB8500_MUX_STATE("stmmod_b_1", "stmmod",
- "stm", "mod_microsd"),
- DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
- "stm", "mod_microsd"),
- DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
- "stm", "mod_microsd"),
- DB8500_PIN_STATE("GPIO23_AA4", in_nopull,
- "stm", "mod_microsd"), /* clk */
- DB8500_PIN_STATE("GPIO25_Y4", in_nopull,
- "stm", "mod_microsd"), /* dat0 */
- DB8500_PIN_STATE("GPIO26_Y2", in_nopull,
- "stm", "mod_microsd"), /* dat1 */
- DB8500_PIN_STATE("GPIO27_AA2", in_nopull,
- "stm", "mod_microsd"), /* dat2 */
- DB8500_PIN_STATE("GPIO28_AA1", in_nopull,
- "stm", "mod_microsd"), /* dat3 */
- DB8500_PIN_STATE("GPIO75_H2", in_pu,
- "stm", "mod_microsd"), /* uartmod rx */
- DB8500_PIN_STATE("GPIO76_J2", out_lo,
- "stm", "mod_microsd"), /* uartmod tx */
-
- DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis,
- "stm", "mod_microsd_sleep"), /* clk */
- DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis,
- "stm", "mod_microsd_sleep"), /* dat0 */
- DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis,
- "stm", "mod_microsd_sleep"), /* dat1 */
- DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis,
- "stm", "mod_microsd_sleep"), /* dat2 */
- DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis,
- "stm", "mod_microsd_sleep"), /* dat3 */
- DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
- "stm", "mod_microsd_sleep"), /* uartmod rx */
- DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
- "stm", "mod_microsd_sleep"), /* uartmod tx */
-
- /* STM dual Modem/APE pins state */
- DB8500_MUX_STATE("stmmod_oc3_2", "stmmod",
- "stm", "mod_mipi34_ape_mipi60"),
- DB8500_MUX_STATE("stmape_c_2", "stmape",
- "stm", "mod_mipi34_ape_mipi60"),
- DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod",
- "stm", "mod_mipi34_ape_mipi60"),
- DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod",
- "stm", "mod_mipi34_ape_mipi60"),
- DB8500_PIN_STATE("GPIO70_G5", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* clk */
- DB8500_PIN_STATE("GPIO71_G4", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat3 */
- DB8500_PIN_STATE("GPIO72_H4", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat2 */
- DB8500_PIN_STATE("GPIO73_H3", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat1 */
- DB8500_PIN_STATE("GPIO74_J3", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat0 */
- DB8500_PIN_STATE("GPIO75_H2", in_pu,
- "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */
- DB8500_PIN_STATE("GPIO76_J2", out_lo,
- "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */
- DB8500_PIN_STATE("GPIO155_C19", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* clk */
- DB8500_PIN_STATE("GPIO156_C17", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat3 */
- DB8500_PIN_STATE("GPIO157_A18", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat2 */
- DB8500_PIN_STATE("GPIO158_C18", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat1 */
- DB8500_PIN_STATE("GPIO159_B19", in_nopull,
- "stm", "mod_mipi34_ape_mipi60"), /* dat0 */
-
- DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
- DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
- DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
- DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
- DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
- DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */
- DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */
- DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */
- DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */
- DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */
- DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */
- DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis,
- "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */
-};
-
-/*
- * These are specifically for the MOP500 and HREFP (pre-v60) version of the
- * board, which utilized a TC35892 GPIO expander instead of using a lot of
- * on-chip pins as the HREFv60 and later does.
- */
-static struct pinctrl_map __initdata mop500_pinmap[] = {
- /* Mux in SSP0, pull down RXD pin */
- DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
- DB8500_PIN_HOG("GPIO145_C13", pd),
- /*
- * XENON Flashgun on image processor GPIO (controlled from image
- * processor firmware), mux in these image processor GPIO lines 0
- * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up
- * the pins.
- */
- DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
- DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
- DB8500_PIN_HOG("GPIO6_AF6", in_pu),
- DB8500_PIN_HOG("GPIO7_AG5", in_pu),
- /* TC35892 IRQ, pull up the line, let the driver mux in the pin */
- DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
- /* Mux in UART1 and set the pull-ups */
- DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
- DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */
- DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */
- /*
- * Runtime stuff: make it possible to mux in the SKE keypad
- * and bias the pins
- */
- /* ske default state */
- DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
- DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */
- DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */
- DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */
- DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */
- DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */
- DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */
- DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */
- DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */
- DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */
- DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */
- DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */
- DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */
- DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */
- DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */
- DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */
- DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */
- /* ske sleep state */
- DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */
- DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */
- DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */
- DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */
- DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */
- DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */
- DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */
- DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */
- DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */
- DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */
- DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */
- DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */
- DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */
- DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
- DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
- DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
-
- /* Mux in and drive the SDI0 DAT31DIR line high at runtime */
- DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
- DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
-};
-
-/*
- * The HREFv60 series of platforms is using available pins on the DB8500
- * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0
- * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines.
- */
-static struct pinctrl_map __initdata hrefv60_pinmap[] = {
- /* Drive WLAN_ENA low */
- DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */
- /*
- * XENON Flashgun on image processor GPIO (controlled from image
- * processor firmware), mux in these image processor GPIO lines 0
- * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
- * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
- * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
- */
- DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"),
- DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
- DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"),
- DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */
- DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */
- DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */
- DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */
- /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
- DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */
- DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */
- /*
- * Display Interface 1 uses GPIO 65 for RST (reset).
- * Display Interface 2 uses GPIO 66 for RST (reset).
- * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
- */
- DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */
- DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */
- /*
- * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
- * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
- * reset signals low.
- */
- DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */
- DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */
- DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */
- /*
- * Drive D19-D23 for the ETM PTM trace interface low,
- * (presumably pins are unconnected therefore grounded here,
- * the "other alt C1" setting enables these pins)
- */
- DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo),
- DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo),
- DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo),
- DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo),
- DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo),
- /* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */
- DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */
- DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */
- /* NFC ENA and RESET to low, pulldown IRQ line */
- DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */
- DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */
- DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */
- /*
- * SKE keyboard partly on alt A and partly on "Other alt C1"
- * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three
- * rows of 6 keys, then pull up force sensing interrup and
- * drive reset and force sensing WU low.
- */
- DB8500_MUX_HOG("kp_a_1", "kp"),
- DB8500_MUX_HOG("kp_oc1_1", "kp"),
- DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */
- DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */
- DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */
- DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */
- DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */
- DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */
- DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */
- DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */
- DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */
- DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */
- DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */
- /* DiPro Sensor interrupt */
- DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */
- /* Audio Amplifier HF enable */
- DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */
- /* GBF interface, pull low to reset state */
- DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */
- /* MSP : HDTV INTERFACE GPIO line */
- DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd),
- /* Accelerometer interrupt lines */
- DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */
- DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */
- /* SD card detect GPIO pin */
- DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu),
- /*
- * Runtime stuff
- * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor
- * etc.
- */
- DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
- DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"),
- DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"),
-};
-
-static struct pinctrl_map __initdata u9500_pinmap[] = {
- /* Mux in UART1 (just RX/TX) and set the pull-ups */
- DB8500_MUX_HOG("u1rxtx_a_1", "u1"),
- DB8500_PIN_HOG("GPIO4_AH6", in_pu),
- DB8500_PIN_HOG("GPIO5_AG6", out_hi),
- /* WLAN_IRQ line */
- DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu),
- /* HSI */
- DB8500_MUX_HOG("hsir_a_1", "hsi"),
- DB8500_MUX_HOG("hsit_a_2", "hsi"),
- DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */
- DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */
- DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */
- DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */
- DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */
- DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */
- DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */
- DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */
-};
-
-static struct pinctrl_map __initdata u8500_pinmap[] = {
- DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */
- DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */
-};
-
-static struct pinctrl_map __initdata snowball_pinmap[] = {
- /* Mux in SSP0 connected to AB8500, pull down RXD pin */
- DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
- DB8500_PIN_HOG("GPIO145_C13", pd),
- /* Always drive the MC0 DAT31DIR line high on these boards */
- DB8500_PIN_HOG("GPIO21_AB3", out_hi),
- /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
- DB8500_MUX_HOG("sm_b_1", "sm"),
- /* User LED */
- DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
- /* Drive RSTn_LAN high */
- DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
- /* Accelerometer/Magnetometer */
- DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
- DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */
- DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */
- /* WLAN/GBF */
- DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */
- DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */
- DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */
- DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */
-};
-
-/*
- * passing "pinsfor=" in kernel cmdline allows for custom
- * configuration of GPIOs on u8500 derived boards.
- */
-static int __init early_pinsfor(char *p)
-{
- pinsfor = PINS_FOR_DEFAULT;
-
- if (strcmp(p, "u9500-21") == 0)
- pinsfor = PINS_FOR_U9500;
-
- return 0;
-}
-early_param("pinsfor", early_pinsfor);
-
-int pins_for_u9500(void)
-{
- if (pinsfor == PINS_FOR_U9500)
- return 1;
-
- return 0;
-}
-
-static void __init mop500_href_family_pinmaps_init(void)
-{
- switch (pinsfor) {
- case PINS_FOR_U9500:
- pinctrl_register_mappings(u9500_pinmap,
- ARRAY_SIZE(u9500_pinmap));
- break;
- case PINS_FOR_DEFAULT:
- pinctrl_register_mappings(u8500_pinmap,
- ARRAY_SIZE(u8500_pinmap));
- default:
- break;
- }
-}
-
void __init mop500_pinmaps_init(void)
{
- pinctrl_register_mappings(mop500_family_pinmap,
- ARRAY_SIZE(mop500_family_pinmap));
- pinctrl_register_mappings(mop500_pinmap,
- ARRAY_SIZE(mop500_pinmap));
- mop500_href_family_pinmaps_init();
if (machine_is_u8520())
pinctrl_register_mappings(ab8505_pinmap,
ARRAY_SIZE(ab8505_pinmap));
@@ -1073,23 +280,12 @@
void __init snowball_pinmaps_init(void)
{
- pinctrl_register_mappings(mop500_family_pinmap,
- ARRAY_SIZE(mop500_family_pinmap));
- pinctrl_register_mappings(snowball_pinmap,
- ARRAY_SIZE(snowball_pinmap));
- pinctrl_register_mappings(u8500_pinmap,
- ARRAY_SIZE(u8500_pinmap));
pinctrl_register_mappings(ab8500_pinmap,
ARRAY_SIZE(ab8500_pinmap));
}
void __init hrefv60_pinmaps_init(void)
{
- pinctrl_register_mappings(mop500_family_pinmap,
- ARRAY_SIZE(mop500_family_pinmap));
- pinctrl_register_mappings(hrefv60_pinmap,
- ARRAY_SIZE(hrefv60_pinmap));
- mop500_href_family_pinmaps_init();
pinctrl_register_mappings(ab8500_pinmap,
ARRAY_SIZE(ab8500_pinmap));
}
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 0dc44c6..a4e139a 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -30,20 +30,6 @@
.consumer_supplies = gpio_en_3v3_consumers,
};
-static struct regulator_consumer_supply sdi0_reg_consumers[] = {
- REGULATOR_SUPPLY("vqmmc", "sdi0"),
-};
-
-struct regulator_init_data sdi0_reg_init_data = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 2900000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdi0_reg_consumers),
- .consumer_supplies = sdi0_reg_consumers,
-};
-
/*
* TPS61052 regulator
*/
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index 039f513..9bece38 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -18,7 +18,6 @@
extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data;
extern struct regulator_init_data tps61052_regulator;
extern struct regulator_init_data gpio_en_3v3_regulator;
-extern struct regulator_init_data sdi0_reg_init_data;
void mop500_regulator_init(void);
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 26600a1..fcbf3a1 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -14,10 +14,8 @@
#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
-#include "devices.h"
#include "db8500-regs.h"
-#include "devices-db8500.h"
#include "board-mop500.h"
#include "ste-dma40-db8500.h"
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
deleted file mode 100644
index 514d40b..0000000
--- a/arch/arm/mach-ux500/board-mop500.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2008-2012 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_data/db8500_thermal.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/regulator/ab8500.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/driver.h>
-#include <linux/mfd/tps6105x.h>
-#include <linux/platform_data/leds-lp55xx.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include <asm/mach-types.h>
-
-#include "setup.h"
-#include "devices.h"
-#include "irqs.h"
-
-#include "ste-dma40-db8500.h"
-#include "db8500-regs.h"
-#include "devices-db8500.h"
-#include "board-mop500.h"
-#include "board-mop500-regulators.h"
-
-struct ab8500_platform_data ab8500_platdata = {
- .irq_base = MOP500_AB8500_IRQ_BASE,
- .regulator = &ab8500_regulator_plat_data,
-};
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_DEV_TO_MEM,
- .dev_type = DB8500_DMA_DEV8_SSP0,
-};
-
-static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = DMA_MEM_TO_DEV,
- .dev_type = DB8500_DMA_DEV8_SSP0,
-};
-#endif
-
-struct pl022_ssp_controller ssp0_plat = {
- .bus_id = 0,
-#ifdef CONFIG_STE_DMA40
- .enable_dma = 1,
- .dma_filter = stedma40_filter,
- .dma_rx_param = &ssp0_dma_cfg_rx,
- .dma_tx_param = &ssp0_dma_cfg_tx,
-#else
- .enable_dma = 0,
-#endif
- /* on this platform, gpio 31,142,144,214 &
- * 224 are connected as chip selects
- */
- .num_chipselect = 5,
-};
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 511d6fe..d48e866 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -87,7 +87,6 @@
extern struct msp_i2s_platform_data msp1_platform_data;
extern struct msp_i2s_platform_data msp2_platform_data;
extern struct msp_i2s_platform_data msp3_platform_data;
-extern struct pl022_ssp_controller ssp0_plat;
void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 12c7e5c..bc8a618 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -21,21 +21,32 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regulator/machine.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
#include "setup.h"
-#include "devices.h"
#include "irqs.h"
-#include "devices-db8500.h"
-#include "db8500-regs.h"
+#include "board-mop500-regulators.h"
#include "board-mop500.h"
+#include "db8500-regs.h"
#include "id.h"
+struct ab8500_platform_data ab8500_platdata = {
+ .irq_base = MOP500_AB8500_IRQ_BASE,
+ .regulator = &ab8500_regulator_plat_data,
+};
+
+struct prcmu_pdata db8500_prcmu_pdata = {
+ .ab_platdata = &ab8500_platdata,
+ .ab_irq = IRQ_DB8500_AB8500,
+ .irq_base = IRQ_PRCMU_BASE,
+ .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
+ .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
+};
+
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
@@ -159,17 +170,10 @@
OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
NULL),
- /* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
- "pinctrl-db8500", NULL),
{},
};
static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
- /* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
- OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
- OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
{},
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index f84d439..d11ac4b 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -25,7 +25,6 @@
#include <asm/mach/map.h>
#include "setup.h"
-#include "devices.h"
#include "board-mop500.h"
#include "db8500-regs.h"
@@ -64,12 +63,7 @@
} else
ux500_unknown_soc();
-#ifdef CONFIG_OF
- if (of_have_populated_dt())
- irqchip_init();
- else
-#endif
- gic_init(0, 29, dist_base, cpu_base);
+ irqchip_init();
/*
* Init clocks here so that they are available for system timer
@@ -79,16 +73,11 @@
prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
- if (of_have_populated_dt())
- u8500_of_clk_init(U8500_CLKRST1_BASE,
- U8500_CLKRST2_BASE,
- U8500_CLKRST3_BASE,
- U8500_CLKRST5_BASE,
- U8500_CLKRST6_BASE);
- else
- u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
- U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
- U8500_CLKRST6_BASE);
+ u8500_of_clk_init(U8500_CLKRST1_BASE,
+ U8500_CLKRST2_BASE,
+ U8500_CLKRST3_BASE,
+ U8500_CLKRST5_BASE,
+ U8500_CLKRST6_BASE);
} else if (cpu_is_u9540()) {
prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
deleted file mode 100644
index c59f89d..0000000
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-#include <linux/mfd/dbx500-prcmu.h>
-
-#include "setup.h"
-#include "irqs.h"
-
-#include "db8500-regs.h"
-#include "devices-db8500.h"
-
-struct prcmu_pdata db8500_prcmu_pdata = {
- .ab_platdata = &ab8500_platdata,
- .ab_irq = IRQ_DB8500_AB8500,
- .irq_base = IRQ_PRCMU_BASE,
- .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
- .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET,
-};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
deleted file mode 100644
index b8ffc99..0000000
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB8500_H
-#define __DEVICES_DB8500_H
-
-#include "irqs.h"
-#include "db8500-regs.h"
-
-struct platform_device;
-
-extern struct ab8500_platform_data ab8500_platdata;
-extern struct prcmu_pdata db8500_prcmu_pdata;
-
-#endif
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
deleted file mode 100644
index 0f9e52b..0000000
--- a/arch/arm/mach-ux500/devices.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/amba/bus.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-
-void __init amba_add_devices(struct amba_device *devs[], int num)
-{
- int i;
-
- for (i = 0; i < num; i++) {
- struct amba_device *d = devs[i];
- amba_device_register(d, &iomem_resource);
- }
-}
diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h
deleted file mode 100644
index 5bca7c6..0000000
--- a/arch/arm/mach-ux500/devices.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __ASM_ARCH_DEVICES_H__
-#define __ASM_ARCH_DEVICES_H__
-
-struct platform_device;
-struct amba_device;
-
-extern struct amba_device ux500_pl031_device;
-
-#endif
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index bdb3564..7164cfd 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -19,17 +19,11 @@
void ux500_restart(enum reboot_mode mode, const char *cmd);
void __init ux500_map_io(void);
-extern void __init u8500_map_io(void);
-
-extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
extern struct device *ux500_soc_device_init(const char *soc_id);
-struct amba_device;
-extern void __init amba_add_devices(struct amba_device *devs[], int num);
-
extern void ux500_timer_init(void);
#define __IO_DEV_DESC(x, sz) { \
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 05a4ff7..87efda0 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -10,40 +10,12 @@
#include <linux/clocksource.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
-
-#include <asm/smp_twd.h>
#include "setup.h"
-#include "irqs.h"
#include "db8500-regs.h"
#include "id.h"
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
- U8500_TWD_BASE, IRQ_LOCALTIMER);
-
-static void __init ux500_twd_init(void)
-{
- struct twd_local_timer *twd_local_timer;
- int err;
-
- /* Use this to switch local timer base if changed in new ASICs */
- twd_local_timer = &u8500_twd_local_timer;
-
- if (of_have_populated_dt())
- clocksource_of_init();
- else {
- err = twd_local_timer_register(twd_local_timer);
- if (err)
- pr_err("twd_local_timer_register failed %d\n", err);
- }
-}
-#else
-#define ux500_twd_init() do { } while(0)
-#endif
-
const static struct of_device_id prcmu_timer_of_match[] __initconst = {
{ .compatible = "stericsson,db8500-prcmu-timer-4", },
{ },
@@ -51,54 +23,26 @@
void __init ux500_timer_init(void)
{
- void __iomem *mtu_timer_base;
void __iomem *prcmu_timer_base;
void __iomem *tmp_base;
struct device_node *np;
- if (cpu_is_u8500_family() || cpu_is_ux540_family()) {
- mtu_timer_base = __io_address(U8500_MTU0_BASE);
+ if (cpu_is_u8500_family() || cpu_is_ux540_family())
prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
- } else {
+ else
ux500_unknown_soc();
- }
- /* TODO: Once MTU has been DT:ed place code above into else. */
- if (of_have_populated_dt()) {
-#ifdef CONFIG_OF
- np = of_find_matching_node(NULL, prcmu_timer_of_match);
- if (!np)
-#endif
- goto dt_fail;
+ np = of_find_matching_node(NULL, prcmu_timer_of_match);
+ if (!np)
+ goto dt_fail;
- tmp_base = of_iomap(np, 0);
- if (!tmp_base)
- goto dt_fail;
+ tmp_base = of_iomap(np, 0);
+ if (!tmp_base)
+ goto dt_fail;
- prcmu_timer_base = tmp_base;
- }
+ prcmu_timer_base = tmp_base;
dt_fail:
- /* Doing it the old fashioned way. */
-
- /*
- * Here we register the timerblocks active in the system.
- * Localtimers (twd) is started when both cpu is up and running.
- * MTU register a clocksource, clockevent and sched_clock.
- * Since the MTU is located in the VAPE power domain
- * it will be cleared in sleep which makes it unsuitable.
- * We however need it as a timer tick (clockevent)
- * during boot to calibrate delay until twd is started.
- * RTC-RTT have problems as timer tick during boot since it is
- * depending on delay which is not yet calibrated. RTC-RTT is in the
- * always-on powerdomain and is used as clockevent instead of twd when
- * sleeping.
- * The PRCMU timer 4 register a clocksource and
- * sched_clock with higher rating then MTU since is always-on.
- *
- */
- if (!of_have_populated_dt())
- nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
clksrc_dbx500_prcmu_init(prcmu_timer_base);
- ux500_twd_init();
+ clocksource_of_init();
}
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index c66d163..830ff07 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -22,6 +22,7 @@
#include <linux/platform_data/dma-mv_xor.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <mach/bridge-regs.h>
+#include <plat/common.h>
/* Create a clkdev entry for a given device/clk */
void __init orion_clkdev_add(const char *con_id, const char *dev_id,
@@ -256,7 +257,7 @@
/*****************************************************************************
* GE00
****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge00_shared_data;
+static struct mv643xx_eth_shared_platform_data orion_ge00_shared_data;
static struct resource orion_ge00_shared_resources[] = {
{
@@ -322,7 +323,7 @@
/*****************************************************************************
* GE01
****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge01_shared_data;
+static struct mv643xx_eth_shared_platform_data orion_ge01_shared_data;
static struct resource orion_ge01_shared_resources[] = {
{
@@ -373,7 +374,7 @@
/*****************************************************************************
* GE10
****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge10_shared_data;
+static struct mv643xx_eth_shared_platform_data orion_ge10_shared_data;
static struct resource orion_ge10_shared_resources[] = {
{
@@ -422,7 +423,7 @@
/*****************************************************************************
* GE11
****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge11_shared_data;
+static struct mv643xx_eth_shared_platform_data orion_ge11_shared_data;
static struct resource orion_ge11_shared_resources[] = {
{
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 9d2b2ac..15921a1 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/sched_clock.h>
+#include <plat/time.h>
/*
* MBus bridge block registers.
@@ -174,7 +175,7 @@
static struct irqaction orion_timer_irq = {
.name = "orion_tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
+ .flags = IRQF_TIMER,
.handler = orion_timer_interrupt
};
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 4afc32f..f48dc0a 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -145,6 +145,8 @@
if (!(fifocon & S3C2410_UFCON_RESETBOTH))
break;
}
+
+ uart_wr(S3C2410_UFCON, S3C2410_UFCON_FIFOMODE);
}
}
#else
diff --git a/drivers/Makefile b/drivers/Makefile
index 3cc8214..8e3b8b0 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -118,7 +118,7 @@
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
-obj-$(CONFIG_ARCH_SHMOBILE) += sh/
+obj-$(CONFIG_ARCH_SHMOBILE_LEGACY) += sh/
ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
obj-y += clocksource/
endif
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 7a10bc9..a3b7c5d 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -35,6 +35,8 @@
obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
+obj-$(CONFIG_COMMON_CLK_AT91) += at91/
+obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/
obj-$(CONFIG_X86) += x86/
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
new file mode 100644
index 0000000..0e92b71
--- /dev/null
+++ b/drivers/clk/at91/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for at91 specific clk
+#
+
+obj-y += pmc.o
+obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
+obj-y += clk-system.o clk-peripheral.o
+
+obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS) += clk-programmable.o
+obj-$(CONFIG_HAVE_AT91_UTMI) += clk-utmi.o
+obj-$(CONFIG_HAVE_AT91_USB_CLK) += clk-usb.o
+obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
new file mode 100644
index 0000000..8e9e8cc
--- /dev/null
+++ b/drivers/clk/at91/clk-main.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "pmc.h"
+
+#define SLOW_CLOCK_FREQ 32768
+#define MAINF_DIV 16
+#define MAINFRDY_TIMEOUT (((MAINF_DIV + 1) * USEC_PER_SEC) / \
+ SLOW_CLOCK_FREQ)
+#define MAINF_LOOP_MIN_WAIT (USEC_PER_SEC / SLOW_CLOCK_FREQ)
+#define MAINF_LOOP_MAX_WAIT MAINFRDY_TIMEOUT
+
+struct clk_main {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned long rate;
+ unsigned int irq;
+ wait_queue_head_t wait;
+};
+
+#define to_clk_main(hw) container_of(hw, struct clk_main, hw)
+
+static irqreturn_t clk_main_irq_handler(int irq, void *dev_id)
+{
+ struct clk_main *clkmain = (struct clk_main *)dev_id;
+
+ wake_up(&clkmain->wait);
+ disable_irq_nosync(clkmain->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_main_prepare(struct clk_hw *hw)
+{
+ struct clk_main *clkmain = to_clk_main(hw);
+ struct at91_pmc *pmc = clkmain->pmc;
+ unsigned long halt_time, timeout;
+ u32 tmp;
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS)) {
+ enable_irq(clkmain->irq);
+ wait_event(clkmain->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
+ }
+
+ if (clkmain->rate)
+ return 0;
+
+ timeout = jiffies + usecs_to_jiffies(MAINFRDY_TIMEOUT);
+ do {
+ halt_time = jiffies;
+ tmp = pmc_read(pmc, AT91_CKGR_MCFR);
+ if (tmp & AT91_PMC_MAINRDY)
+ return 0;
+ usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
+ } while (time_before(halt_time, timeout));
+
+ return 0;
+}
+
+static int clk_main_is_prepared(struct clk_hw *hw)
+{
+ struct clk_main *clkmain = to_clk_main(hw);
+
+ return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCS);
+}
+
+static unsigned long clk_main_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ struct clk_main *clkmain = to_clk_main(hw);
+ struct at91_pmc *pmc = clkmain->pmc;
+
+ if (clkmain->rate)
+ return clkmain->rate;
+
+ tmp = pmc_read(pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINF;
+ clkmain->rate = (tmp * parent_rate) / MAINF_DIV;
+
+ return clkmain->rate;
+}
+
+static const struct clk_ops main_ops = {
+ .prepare = clk_main_prepare,
+ .is_prepared = clk_main_is_prepared,
+ .recalc_rate = clk_main_recalc_rate,
+};
+
+static struct clk * __init
+at91_clk_register_main(struct at91_pmc *pmc,
+ unsigned int irq,
+ const char *name,
+ const char *parent_name,
+ unsigned long rate)
+{
+ int ret;
+ struct clk_main *clkmain;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !irq || !name)
+ return ERR_PTR(-EINVAL);
+
+ if (!rate && !parent_name)
+ return ERR_PTR(-EINVAL);
+
+ clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL);
+ if (!clkmain)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &main_ops;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.flags = parent_name ? 0 : CLK_IS_ROOT;
+
+ clkmain->hw.init = &init;
+ clkmain->rate = rate;
+ clkmain->pmc = pmc;
+ clkmain->irq = irq;
+ init_waitqueue_head(&clkmain->wait);
+ irq_set_status_flags(clkmain->irq, IRQ_NOAUTOEN);
+ ret = request_irq(clkmain->irq, clk_main_irq_handler,
+ IRQF_TRIGGER_HIGH, "clk-main", clkmain);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &clkmain->hw);
+ if (IS_ERR(clk)) {
+ free_irq(clkmain->irq, clkmain);
+ kfree(clkmain);
+ }
+
+ return clk;
+}
+
+
+
+static void __init
+of_at91_clk_main_setup(struct device_node *np, struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ unsigned int irq;
+ const char *parent_name;
+ const char *name = np->name;
+ u32 rate = 0;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "clock-frequency", &rate);
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_main(pmc, irq, name, parent_name, rate);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+void __init of_at91rm9200_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_main_setup(np, pmc);
+}
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
new file mode 100644
index 0000000..bd313f7
--- /dev/null
+++ b/drivers/clk/at91/clk-master.c
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include "pmc.h"
+
+#define MASTER_SOURCE_MAX 4
+
+#define MASTER_PRES_MASK 0x7
+#define MASTER_PRES_MAX MASTER_PRES_MASK
+#define MASTER_DIV_SHIFT 8
+#define MASTER_DIV_MASK 0x3
+
+struct clk_master_characteristics {
+ struct clk_range output;
+ u32 divisors[4];
+ u8 have_div3_pres;
+};
+
+struct clk_master_layout {
+ u32 mask;
+ u8 pres_shift;
+};
+
+#define to_clk_master(hw) container_of(hw, struct clk_master, hw)
+
+struct clk_master {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ const struct clk_master_layout *layout;
+ const struct clk_master_characteristics *characteristics;
+};
+
+static irqreturn_t clk_master_irq_handler(int irq, void *dev_id)
+{
+ struct clk_master *master = (struct clk_master *)dev_id;
+
+ wake_up(&master->wait);
+ disable_irq_nosync(master->irq);
+
+ return IRQ_HANDLED;
+}
+static int clk_master_prepare(struct clk_hw *hw)
+{
+ struct clk_master *master = to_clk_master(hw);
+ struct at91_pmc *pmc = master->pmc;
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MCKRDY)) {
+ enable_irq(master->irq);
+ wait_event(master->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MCKRDY);
+ }
+
+ return 0;
+}
+
+static int clk_master_is_prepared(struct clk_hw *hw)
+{
+ struct clk_master *master = to_clk_master(hw);
+
+ return !!(pmc_read(master->pmc, AT91_PMC_SR) & AT91_PMC_MCKRDY);
+}
+
+static unsigned long clk_master_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u8 pres;
+ u8 div;
+ unsigned long rate = parent_rate;
+ struct clk_master *master = to_clk_master(hw);
+ struct at91_pmc *pmc = master->pmc;
+ const struct clk_master_layout *layout = master->layout;
+ const struct clk_master_characteristics *characteristics =
+ master->characteristics;
+ u32 tmp;
+
+ pmc_lock(pmc);
+ tmp = pmc_read(pmc, AT91_PMC_MCKR) & layout->mask;
+ pmc_unlock(pmc);
+
+ pres = (tmp >> layout->pres_shift) & MASTER_PRES_MASK;
+ div = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
+
+ if (characteristics->have_div3_pres && pres == MASTER_PRES_MAX)
+ rate /= 3;
+ else
+ rate >>= pres;
+
+ rate /= characteristics->divisors[div];
+
+ if (rate < characteristics->output.min)
+ pr_warn("master clk is underclocked");
+ else if (rate > characteristics->output.max)
+ pr_warn("master clk is overclocked");
+
+ return rate;
+}
+
+static u8 clk_master_get_parent(struct clk_hw *hw)
+{
+ struct clk_master *master = to_clk_master(hw);
+ struct at91_pmc *pmc = master->pmc;
+
+ return pmc_read(pmc, AT91_PMC_MCKR) & AT91_PMC_CSS;
+}
+
+static const struct clk_ops master_ops = {
+ .prepare = clk_master_prepare,
+ .is_prepared = clk_master_is_prepared,
+ .recalc_rate = clk_master_recalc_rate,
+ .get_parent = clk_master_get_parent,
+};
+
+static struct clk * __init
+at91_clk_register_master(struct at91_pmc *pmc, unsigned int irq,
+ const char *name, int num_parents,
+ const char **parent_names,
+ const struct clk_master_layout *layout,
+ const struct clk_master_characteristics *characteristics)
+{
+ int ret;
+ struct clk_master *master;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !irq || !name || !num_parents || !parent_names)
+ return ERR_PTR(-EINVAL);
+
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
+ if (!master)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &master_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = 0;
+
+ master->hw.init = &init;
+ master->layout = layout;
+ master->characteristics = characteristics;
+ master->pmc = pmc;
+ master->irq = irq;
+ init_waitqueue_head(&master->wait);
+ irq_set_status_flags(master->irq, IRQ_NOAUTOEN);
+ ret = request_irq(master->irq, clk_master_irq_handler,
+ IRQF_TRIGGER_HIGH, "clk-master", master);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &master->hw);
+ if (IS_ERR(clk))
+ kfree(master);
+
+ return clk;
+}
+
+
+static const struct clk_master_layout at91rm9200_master_layout = {
+ .mask = 0x31F,
+ .pres_shift = 2,
+};
+
+static const struct clk_master_layout at91sam9x5_master_layout = {
+ .mask = 0x373,
+ .pres_shift = 4,
+};
+
+
+static struct clk_master_characteristics * __init
+of_at91_clk_master_get_characteristics(struct device_node *np)
+{
+ struct clk_master_characteristics *characteristics;
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output))
+ goto out_free_characteristics;
+
+ of_property_read_u32_array(np, "atmel,clk-divisors",
+ characteristics->divisors, 4);
+
+ characteristics->have_div3_pres =
+ of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
+
+ return characteristics;
+
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_master_setup(struct device_node *np, struct at91_pmc *pmc,
+ const struct clk_master_layout *layout)
+{
+ struct clk *clk;
+ int num_parents;
+ int i;
+ unsigned int irq;
+ const char *parent_names[MASTER_SOURCE_MAX];
+ const char *name = np->name;
+ struct clk_master_characteristics *characteristics;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > MASTER_SOURCE_MAX)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ characteristics = of_at91_clk_master_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_master(pmc, irq, name, num_parents,
+ parent_names, layout,
+ characteristics);
+ if (IS_ERR(clk))
+ goto out_free_characteristics;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+void __init of_at91rm9200_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_master_setup(np, pmc, &at91rm9200_master_layout);
+}
+
+void __init of_at91sam9x5_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_master_setup(np, pmc, &at91sam9x5_master_layout);
+}
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
new file mode 100644
index 0000000..597fed4
--- /dev/null
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define PERIPHERAL_MAX 64
+
+#define PERIPHERAL_AT91RM9200 0
+#define PERIPHERAL_AT91SAM9X5 1
+
+#define PERIPHERAL_ID_MIN 2
+#define PERIPHERAL_ID_MAX 31
+#define PERIPHERAL_MASK(id) (1 << ((id) & PERIPHERAL_ID_MAX))
+
+#define PERIPHERAL_RSHIFT_MASK 0x3
+#define PERIPHERAL_RSHIFT(val) (((val) >> 16) & PERIPHERAL_RSHIFT_MASK)
+
+#define PERIPHERAL_MAX_SHIFT 4
+
+struct clk_peripheral {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ u32 id;
+};
+
+#define to_clk_peripheral(hw) container_of(hw, struct clk_peripheral, hw)
+
+struct clk_sam9x5_peripheral {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ struct clk_range range;
+ u32 id;
+ u32 div;
+ bool auto_div;
+};
+
+#define to_clk_sam9x5_peripheral(hw) \
+ container_of(hw, struct clk_sam9x5_peripheral, hw)
+
+static int clk_peripheral_enable(struct clk_hw *hw)
+{
+ struct clk_peripheral *periph = to_clk_peripheral(hw);
+ struct at91_pmc *pmc = periph->pmc;
+ int offset = AT91_PMC_PCER;
+ u32 id = periph->id;
+
+ if (id < PERIPHERAL_ID_MIN)
+ return 0;
+ if (id > PERIPHERAL_ID_MAX)
+ offset = AT91_PMC_PCER1;
+ pmc_write(pmc, offset, PERIPHERAL_MASK(id));
+ return 0;
+}
+
+static void clk_peripheral_disable(struct clk_hw *hw)
+{
+ struct clk_peripheral *periph = to_clk_peripheral(hw);
+ struct at91_pmc *pmc = periph->pmc;
+ int offset = AT91_PMC_PCDR;
+ u32 id = periph->id;
+
+ if (id < PERIPHERAL_ID_MIN)
+ return;
+ if (id > PERIPHERAL_ID_MAX)
+ offset = AT91_PMC_PCDR1;
+ pmc_write(pmc, offset, PERIPHERAL_MASK(id));
+}
+
+static int clk_peripheral_is_enabled(struct clk_hw *hw)
+{
+ struct clk_peripheral *periph = to_clk_peripheral(hw);
+ struct at91_pmc *pmc = periph->pmc;
+ int offset = AT91_PMC_PCSR;
+ u32 id = periph->id;
+
+ if (id < PERIPHERAL_ID_MIN)
+ return 1;
+ if (id > PERIPHERAL_ID_MAX)
+ offset = AT91_PMC_PCSR1;
+ return !!(pmc_read(pmc, offset) & PERIPHERAL_MASK(id));
+}
+
+static const struct clk_ops peripheral_ops = {
+ .enable = clk_peripheral_enable,
+ .disable = clk_peripheral_disable,
+ .is_enabled = clk_peripheral_is_enabled,
+};
+
+static struct clk * __init
+at91_clk_register_peripheral(struct at91_pmc *pmc, const char *name,
+ const char *parent_name, u32 id)
+{
+ struct clk_peripheral *periph;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !name || !parent_name || id > PERIPHERAL_ID_MAX)
+ return ERR_PTR(-EINVAL);
+
+ periph = kzalloc(sizeof(*periph), GFP_KERNEL);
+ if (!periph)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &peripheral_ops;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ init.flags = 0;
+
+ periph->id = id;
+ periph->hw.init = &init;
+ periph->pmc = pmc;
+
+ clk = clk_register(NULL, &periph->hw);
+ if (IS_ERR(clk))
+ kfree(periph);
+
+ return clk;
+}
+
+static void clk_sam9x5_peripheral_autodiv(struct clk_sam9x5_peripheral *periph)
+{
+ struct clk *parent;
+ unsigned long parent_rate;
+ int shift = 0;
+
+ if (!periph->auto_div)
+ return;
+
+ if (periph->range.max) {
+ parent = clk_get_parent_by_index(periph->hw.clk, 0);
+ parent_rate = __clk_get_rate(parent);
+ if (!parent_rate)
+ return;
+
+ for (; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+ if (parent_rate >> shift <= periph->range.max)
+ break;
+ }
+ }
+
+ periph->auto_div = false;
+ periph->div = shift;
+}
+
+static int clk_sam9x5_peripheral_enable(struct clk_hw *hw)
+{
+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+ struct at91_pmc *pmc = periph->pmc;
+
+ if (periph->id < PERIPHERAL_ID_MIN)
+ return 0;
+
+ pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID) |
+ AT91_PMC_PCR_CMD |
+ AT91_PMC_PCR_DIV(periph->div) |
+ AT91_PMC_PCR_EN);
+ return 0;
+}
+
+static void clk_sam9x5_peripheral_disable(struct clk_hw *hw)
+{
+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+ struct at91_pmc *pmc = periph->pmc;
+
+ if (periph->id < PERIPHERAL_ID_MIN)
+ return;
+
+ pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID) |
+ AT91_PMC_PCR_CMD);
+}
+
+static int clk_sam9x5_peripheral_is_enabled(struct clk_hw *hw)
+{
+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+ struct at91_pmc *pmc = periph->pmc;
+ int ret;
+
+ if (periph->id < PERIPHERAL_ID_MIN)
+ return 1;
+
+ pmc_lock(pmc);
+ pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID));
+ ret = !!(pmc_read(pmc, AT91_PMC_PCR) & AT91_PMC_PCR_EN);
+ pmc_unlock(pmc);
+
+ return ret;
+}
+
+static unsigned long
+clk_sam9x5_peripheral_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+ struct at91_pmc *pmc = periph->pmc;
+ u32 tmp;
+
+ if (periph->id < PERIPHERAL_ID_MIN)
+ return parent_rate;
+
+ pmc_lock(pmc);
+ pmc_write(pmc, AT91_PMC_PCR, (periph->id & AT91_PMC_PCR_PID));
+ tmp = pmc_read(pmc, AT91_PMC_PCR);
+ pmc_unlock(pmc);
+
+ if (tmp & AT91_PMC_PCR_EN) {
+ periph->div = PERIPHERAL_RSHIFT(tmp);
+ periph->auto_div = false;
+ } else {
+ clk_sam9x5_peripheral_autodiv(periph);
+ }
+
+ return parent_rate >> periph->div;
+}
+
+static long clk_sam9x5_peripheral_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ int shift = 0;
+ unsigned long best_rate;
+ unsigned long best_diff;
+ unsigned long cur_rate = *parent_rate;
+ unsigned long cur_diff;
+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+
+ if (periph->id < PERIPHERAL_ID_MIN || !periph->range.max)
+ return *parent_rate;
+
+ if (periph->range.max) {
+ for (; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+ cur_rate = *parent_rate >> shift;
+ if (cur_rate <= periph->range.max)
+ break;
+ }
+ }
+
+ if (rate >= cur_rate)
+ return cur_rate;
+
+ best_diff = cur_rate - rate;
+ best_rate = cur_rate;
+ for (; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+ cur_rate = *parent_rate >> shift;
+ if (cur_rate < rate)
+ cur_diff = rate - cur_rate;
+ else
+ cur_diff = cur_rate - rate;
+
+ if (cur_diff < best_diff) {
+ best_diff = cur_diff;
+ best_rate = cur_rate;
+ }
+
+ if (!best_diff || cur_rate < rate)
+ break;
+ }
+
+ return best_rate;
+}
+
+static int clk_sam9x5_peripheral_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ int shift;
+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+ if (periph->id < PERIPHERAL_ID_MIN || !periph->range.max) {
+ if (parent_rate == rate)
+ return 0;
+ else
+ return -EINVAL;
+ }
+
+ if (periph->range.max && rate > periph->range.max)
+ return -EINVAL;
+
+ for (shift = 0; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+ if (parent_rate >> shift == rate) {
+ periph->auto_div = false;
+ periph->div = shift;
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static const struct clk_ops sam9x5_peripheral_ops = {
+ .enable = clk_sam9x5_peripheral_enable,
+ .disable = clk_sam9x5_peripheral_disable,
+ .is_enabled = clk_sam9x5_peripheral_is_enabled,
+ .recalc_rate = clk_sam9x5_peripheral_recalc_rate,
+ .round_rate = clk_sam9x5_peripheral_round_rate,
+ .set_rate = clk_sam9x5_peripheral_set_rate,
+};
+
+static struct clk * __init
+at91_clk_register_sam9x5_peripheral(struct at91_pmc *pmc, const char *name,
+ const char *parent_name, u32 id,
+ const struct clk_range *range)
+{
+ struct clk_sam9x5_peripheral *periph;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!pmc || !name || !parent_name)
+ return ERR_PTR(-EINVAL);
+
+ periph = kzalloc(sizeof(*periph), GFP_KERNEL);
+ if (!periph)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &sam9x5_peripheral_ops;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ init.flags = 0;
+
+ periph->id = id;
+ periph->hw.init = &init;
+ periph->div = 0;
+ periph->pmc = pmc;
+ periph->auto_div = true;
+ periph->range = *range;
+
+ clk = clk_register(NULL, &periph->hw);
+ if (IS_ERR(clk))
+ kfree(periph);
+ else
+ clk_sam9x5_peripheral_autodiv(periph);
+
+ return clk;
+}
+
+static void __init
+of_at91_clk_periph_setup(struct device_node *np, struct at91_pmc *pmc, u8 type)
+{
+ int num;
+ u32 id;
+ struct clk *clk;
+ const char *parent_name;
+ const char *name;
+ struct device_node *periphclknp;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ num = of_get_child_count(np);
+ if (!num || num > PERIPHERAL_MAX)
+ return;
+
+ for_each_child_of_node(np, periphclknp) {
+ if (of_property_read_u32(periphclknp, "reg", &id))
+ continue;
+
+ if (id >= PERIPHERAL_MAX)
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = periphclknp->name;
+
+ if (type == PERIPHERAL_AT91RM9200) {
+ clk = at91_clk_register_peripheral(pmc, name,
+ parent_name, id);
+ } else {
+ struct clk_range range = CLK_RANGE(0, 0);
+
+ of_at91_get_clk_range(periphclknp,
+ "atmel,clk-output-range",
+ &range);
+
+ clk = at91_clk_register_sam9x5_peripheral(pmc, name,
+ parent_name,
+ id, &range);
+ }
+
+ if (IS_ERR(clk))
+ continue;
+
+ of_clk_add_provider(periphclknp, of_clk_src_simple_get, clk);
+ }
+}
+
+void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_periph_setup(np, pmc, PERIPHERAL_AT91RM9200);
+}
+
+void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_periph_setup(np, pmc, PERIPHERAL_AT91SAM9X5);
+}
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
new file mode 100644
index 0000000..cf6ed02
--- /dev/null
+++ b/drivers/clk/at91/clk-pll.c
@@ -0,0 +1,531 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include "pmc.h"
+
+#define PLL_STATUS_MASK(id) (1 << (1 + (id)))
+#define PLL_REG(id) (AT91_CKGR_PLLAR + ((id) * 4))
+#define PLL_DIV_MASK 0xff
+#define PLL_DIV_MAX PLL_DIV_MASK
+#define PLL_DIV(reg) ((reg) & PLL_DIV_MASK)
+#define PLL_MUL(reg, layout) (((reg) >> (layout)->mul_shift) & \
+ (layout)->mul_mask)
+#define PLL_ICPR_SHIFT(id) ((id) * 16)
+#define PLL_ICPR_MASK(id) (0xffff << PLL_ICPR_SHIFT(id))
+#define PLL_MAX_COUNT 0x3ff
+#define PLL_COUNT_SHIFT 8
+#define PLL_OUT_SHIFT 14
+#define PLL_MAX_ID 1
+
+struct clk_pll_characteristics {
+ struct clk_range input;
+ int num_output;
+ struct clk_range *output;
+ u16 *icpll;
+ u8 *out;
+};
+
+struct clk_pll_layout {
+ u32 pllr_mask;
+ u16 mul_mask;
+ u8 mul_shift;
+};
+
+#define to_clk_pll(hw) container_of(hw, struct clk_pll, hw)
+
+struct clk_pll {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ u8 id;
+ u8 div;
+ u8 range;
+ u16 mul;
+ const struct clk_pll_layout *layout;
+ const struct clk_pll_characteristics *characteristics;
+};
+
+static irqreturn_t clk_pll_irq_handler(int irq, void *dev_id)
+{
+ struct clk_pll *pll = (struct clk_pll *)dev_id;
+
+ wake_up(&pll->wait);
+ disable_irq_nosync(pll->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_pll_prepare(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct at91_pmc *pmc = pll->pmc;
+ const struct clk_pll_layout *layout = pll->layout;
+ const struct clk_pll_characteristics *characteristics =
+ pll->characteristics;
+ u8 id = pll->id;
+ u32 mask = PLL_STATUS_MASK(id);
+ int offset = PLL_REG(id);
+ u8 out = 0;
+ u32 pllr, icpr;
+ u8 div;
+ u16 mul;
+
+ pllr = pmc_read(pmc, offset);
+ div = PLL_DIV(pllr);
+ mul = PLL_MUL(pllr, layout);
+
+ if ((pmc_read(pmc, AT91_PMC_SR) & mask) &&
+ (div == pll->div && mul == pll->mul))
+ return 0;
+
+ if (characteristics->out)
+ out = characteristics->out[pll->range];
+ if (characteristics->icpll) {
+ icpr = pmc_read(pmc, AT91_PMC_PLLICPR) & ~PLL_ICPR_MASK(id);
+ icpr |= (characteristics->icpll[pll->range] <<
+ PLL_ICPR_SHIFT(id));
+ pmc_write(pmc, AT91_PMC_PLLICPR, icpr);
+ }
+
+ pllr &= ~layout->pllr_mask;
+ pllr |= layout->pllr_mask &
+ (pll->div | (PLL_MAX_COUNT << PLL_COUNT_SHIFT) |
+ (out << PLL_OUT_SHIFT) |
+ ((pll->mul & layout->mul_mask) << layout->mul_shift));
+ pmc_write(pmc, offset, pllr);
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & mask)) {
+ enable_irq(pll->irq);
+ wait_event(pll->wait,
+ pmc_read(pmc, AT91_PMC_SR) & mask);
+ }
+
+ return 0;
+}
+
+static int clk_pll_is_prepared(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct at91_pmc *pmc = pll->pmc;
+
+ return !!(pmc_read(pmc, AT91_PMC_SR) &
+ PLL_STATUS_MASK(pll->id));
+}
+
+static void clk_pll_unprepare(struct clk_hw *hw)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct at91_pmc *pmc = pll->pmc;
+ const struct clk_pll_layout *layout = pll->layout;
+ int offset = PLL_REG(pll->id);
+ u32 tmp = pmc_read(pmc, offset) & ~(layout->pllr_mask);
+
+ pmc_write(pmc, offset, tmp);
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ const struct clk_pll_layout *layout = pll->layout;
+ struct at91_pmc *pmc = pll->pmc;
+ int offset = PLL_REG(pll->id);
+ u32 tmp = pmc_read(pmc, offset) & layout->pllr_mask;
+ u8 div = PLL_DIV(tmp);
+ u16 mul = PLL_MUL(tmp, layout);
+ if (!div || !mul)
+ return 0;
+
+ return (parent_rate * (mul + 1)) / div;
+}
+
+static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
+ unsigned long parent_rate,
+ u32 *div, u32 *mul,
+ u32 *index) {
+ unsigned long maxrate;
+ unsigned long minrate;
+ unsigned long divrate;
+ unsigned long bestdiv = 1;
+ unsigned long bestmul;
+ unsigned long tmpdiv;
+ unsigned long roundup;
+ unsigned long rounddown;
+ unsigned long remainder;
+ unsigned long bestremainder;
+ unsigned long maxmul;
+ unsigned long maxdiv;
+ unsigned long mindiv;
+ int i = 0;
+ const struct clk_pll_layout *layout = pll->layout;
+ const struct clk_pll_characteristics *characteristics =
+ pll->characteristics;
+
+ /* Minimum divider = 1 */
+ /* Maximum multiplier = max_mul */
+ maxmul = layout->mul_mask + 1;
+ maxrate = (parent_rate * maxmul) / 1;
+
+ /* Maximum divider = max_div */
+ /* Minimum multiplier = 2 */
+ maxdiv = PLL_DIV_MAX;
+ minrate = (parent_rate * 2) / maxdiv;
+
+ if (parent_rate < characteristics->input.min ||
+ parent_rate < characteristics->input.max)
+ return -ERANGE;
+
+ if (parent_rate < minrate || parent_rate > maxrate)
+ return -ERANGE;
+
+ for (i = 0; i < characteristics->num_output; i++) {
+ if (parent_rate >= characteristics->output[i].min &&
+ parent_rate <= characteristics->output[i].max)
+ break;
+ }
+
+ if (i >= characteristics->num_output)
+ return -ERANGE;
+
+ bestmul = rate / parent_rate;
+ rounddown = parent_rate % rate;
+ roundup = rate - rounddown;
+ bestremainder = roundup < rounddown ? roundup : rounddown;
+
+ if (!bestremainder) {
+ if (div)
+ *div = bestdiv;
+ if (mul)
+ *mul = bestmul;
+ if (index)
+ *index = i;
+ return rate;
+ }
+
+ maxdiv = 255 / (bestmul + 1);
+ if (parent_rate / maxdiv < characteristics->input.min)
+ maxdiv = parent_rate / characteristics->input.min;
+ mindiv = parent_rate / characteristics->input.max;
+ if (parent_rate % characteristics->input.max)
+ mindiv++;
+
+ for (tmpdiv = mindiv; tmpdiv < maxdiv; tmpdiv++) {
+ divrate = parent_rate / tmpdiv;
+
+ rounddown = rate % divrate;
+ roundup = divrate - rounddown;
+ remainder = roundup < rounddown ? roundup : rounddown;
+
+ if (remainder < bestremainder) {
+ bestremainder = remainder;
+ bestmul = rate / divrate;
+ bestdiv = tmpdiv;
+ }
+
+ if (!remainder)
+ break;
+ }
+
+ rate = (parent_rate / bestdiv) * bestmul;
+
+ if (div)
+ *div = bestdiv;
+ if (mul)
+ *mul = bestmul;
+ if (index)
+ *index = i;
+
+ return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+
+ return clk_pll_get_best_div_mul(pll, rate, *parent_rate,
+ NULL, NULL, NULL);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ long ret;
+ u32 div;
+ u32 mul;
+ u32 index;
+
+ ret = clk_pll_get_best_div_mul(pll, rate, parent_rate,
+ &div, &mul, &index);
+ if (ret < 0)
+ return ret;
+
+ pll->range = index;
+ pll->div = div;
+ pll->mul = mul;
+
+ return 0;
+}
+
+static const struct clk_ops pll_ops = {
+ .prepare = clk_pll_prepare,
+ .unprepare = clk_pll_unprepare,
+ .is_prepared = clk_pll_is_prepared,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
+};
+
+static struct clk * __init
+at91_clk_register_pll(struct at91_pmc *pmc, unsigned int irq, const char *name,
+ const char *parent_name, u8 id,
+ const struct clk_pll_layout *layout,
+ const struct clk_pll_characteristics *characteristics)
+{
+ struct clk_pll *pll;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+ int ret;
+ int offset = PLL_REG(id);
+ u32 tmp;
+
+ if (id > PLL_MAX_ID)
+ return ERR_PTR(-EINVAL);
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &pll_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_SET_RATE_GATE;
+
+ pll->id = id;
+ pll->hw.init = &init;
+ pll->layout = layout;
+ pll->characteristics = characteristics;
+ pll->pmc = pmc;
+ pll->irq = irq;
+ tmp = pmc_read(pmc, offset) & layout->pllr_mask;
+ pll->div = PLL_DIV(tmp);
+ pll->mul = PLL_MUL(tmp, layout);
+ init_waitqueue_head(&pll->wait);
+ irq_set_status_flags(pll->irq, IRQ_NOAUTOEN);
+ ret = request_irq(pll->irq, clk_pll_irq_handler, IRQF_TRIGGER_HIGH,
+ id ? "clk-pllb" : "clk-plla", pll);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+
+
+static const struct clk_pll_layout at91rm9200_pll_layout = {
+ .pllr_mask = 0x7FFFFFF,
+ .mul_shift = 16,
+ .mul_mask = 0x7FF,
+};
+
+static const struct clk_pll_layout at91sam9g45_pll_layout = {
+ .pllr_mask = 0xFFFFFF,
+ .mul_shift = 16,
+ .mul_mask = 0xFF,
+};
+
+static const struct clk_pll_layout at91sam9g20_pllb_layout = {
+ .pllr_mask = 0x3FFFFF,
+ .mul_shift = 16,
+ .mul_mask = 0x3F,
+};
+
+static const struct clk_pll_layout sama5d3_pll_layout = {
+ .pllr_mask = 0x1FFFFFF,
+ .mul_shift = 18,
+ .mul_mask = 0x7F,
+};
+
+
+static struct clk_pll_characteristics * __init
+of_at91_clk_pll_get_characteristics(struct device_node *np)
+{
+ int i;
+ int offset;
+ u32 tmp;
+ int num_output;
+ u32 num_cells;
+ struct clk_range input;
+ struct clk_range *output;
+ u8 *out = NULL;
+ u16 *icpll = NULL;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
+ return NULL;
+
+ if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
+ &num_cells))
+ return NULL;
+
+ if (num_cells < 2 || num_cells > 4)
+ return NULL;
+
+ if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
+ return NULL;
+ num_output = tmp / (sizeof(u32) * num_cells);
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ output = kzalloc(sizeof(*output) * num_output, GFP_KERNEL);
+ if (!output)
+ goto out_free_characteristics;
+
+ if (num_cells > 2) {
+ out = kzalloc(sizeof(*out) * num_output, GFP_KERNEL);
+ if (!out)
+ goto out_free_output;
+ }
+
+ if (num_cells > 3) {
+ icpll = kzalloc(sizeof(*icpll) * num_output, GFP_KERNEL);
+ if (!icpll)
+ goto out_free_output;
+ }
+
+ for (i = 0; i < num_output; i++) {
+ offset = i * num_cells;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset, &tmp))
+ goto out_free_output;
+ output[i].min = tmp;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 1, &tmp))
+ goto out_free_output;
+ output[i].max = tmp;
+
+ if (num_cells == 2)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 2, &tmp))
+ goto out_free_output;
+ out[i] = tmp;
+
+ if (num_cells == 3)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 3, &tmp))
+ goto out_free_output;
+ icpll[i] = tmp;
+ }
+
+ characteristics->input = input;
+ characteristics->num_output = num_output;
+ characteristics->output = output;
+ characteristics->out = out;
+ characteristics->icpll = icpll;
+ return characteristics;
+
+out_free_output:
+ kfree(icpll);
+ kfree(out);
+ kfree(output);
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_pll_setup(struct device_node *np, struct at91_pmc *pmc,
+ const struct clk_pll_layout *layout)
+{
+ u32 id;
+ unsigned int irq;
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_property_read_u32(np, "reg", &id))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ characteristics = of_at91_clk_pll_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_pll(pmc, irq, name, parent_name, id, layout,
+ characteristics);
+ if (IS_ERR(clk))
+ goto out_free_characteristics;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &at91rm9200_pll_layout);
+}
+
+void __init of_at91sam9g45_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &at91sam9g45_pll_layout);
+}
+
+void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &at91sam9g20_pllb_layout);
+}
+
+void __init of_sama5d3_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_pll_setup(np, pmc, &sama5d3_pll_layout);
+}
diff --git a/drivers/clk/at91/clk-plldiv.c b/drivers/clk/at91/clk-plldiv.c
new file mode 100644
index 0000000..ea22656
--- /dev/null
+++ b/drivers/clk/at91/clk-plldiv.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define to_clk_plldiv(hw) container_of(hw, struct clk_plldiv, hw)
+
+struct clk_plldiv {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+static unsigned long clk_plldiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_plldiv *plldiv = to_clk_plldiv(hw);
+ struct at91_pmc *pmc = plldiv->pmc;
+
+ if (pmc_read(pmc, AT91_PMC_MCKR) & AT91_PMC_PLLADIV2)
+ return parent_rate / 2;
+
+ return parent_rate;
+}
+
+static long clk_plldiv_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long div;
+
+ if (rate > *parent_rate)
+ return *parent_rate;
+ div = *parent_rate / 2;
+ if (rate < div)
+ return div;
+
+ if (rate - div < *parent_rate - rate)
+ return div;
+
+ return *parent_rate;
+}
+
+static int clk_plldiv_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_plldiv *plldiv = to_clk_plldiv(hw);
+ struct at91_pmc *pmc = plldiv->pmc;
+ u32 tmp;
+
+ if (parent_rate != rate && (parent_rate / 2) != rate)
+ return -EINVAL;
+
+ pmc_lock(pmc);
+ tmp = pmc_read(pmc, AT91_PMC_MCKR) & ~AT91_PMC_PLLADIV2;
+ if ((parent_rate / 2) == rate)
+ tmp |= AT91_PMC_PLLADIV2;
+ pmc_write(pmc, AT91_PMC_MCKR, tmp);
+ pmc_unlock(pmc);
+
+ return 0;
+}
+
+static const struct clk_ops plldiv_ops = {
+ .recalc_rate = clk_plldiv_recalc_rate,
+ .round_rate = clk_plldiv_round_rate,
+ .set_rate = clk_plldiv_set_rate,
+};
+
+static struct clk * __init
+at91_clk_register_plldiv(struct at91_pmc *pmc, const char *name,
+ const char *parent_name)
+{
+ struct clk_plldiv *plldiv;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ plldiv = kzalloc(sizeof(*plldiv), GFP_KERNEL);
+ if (!plldiv)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &plldiv_ops;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.flags = CLK_SET_RATE_GATE;
+
+ plldiv->hw.init = &init;
+ plldiv->pmc = pmc;
+
+ clk = clk_register(NULL, &plldiv->hw);
+
+ if (IS_ERR(clk))
+ kfree(plldiv);
+
+ return clk;
+}
+
+static void __init
+of_at91_clk_plldiv_setup(struct device_node *np, struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91_clk_register_plldiv(pmc, name, parent_name);
+
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+}
+
+void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_plldiv_setup(np, pmc);
+}
diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
new file mode 100644
index 0000000..fd792b2
--- /dev/null
+++ b/drivers/clk/at91/clk-programmable.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include "pmc.h"
+
+#define PROG_SOURCE_MAX 5
+#define PROG_ID_MAX 7
+
+#define PROG_STATUS_MASK(id) (1 << ((id) + 8))
+#define PROG_PRES_MASK 0x7
+#define PROG_MAX_RM9200_CSS 3
+
+struct clk_programmable_layout {
+ u8 pres_shift;
+ u8 css_mask;
+ u8 have_slck_mck;
+};
+
+struct clk_programmable {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+ u8 id;
+ u8 css;
+ u8 pres;
+ u8 slckmck;
+ const struct clk_programmable_layout *layout;
+};
+
+#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
+
+
+static irqreturn_t clk_programmable_irq_handler(int irq, void *dev_id)
+{
+ struct clk_programmable *prog = (struct clk_programmable *)dev_id;
+
+ wake_up(&prog->wait);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_programmable_prepare(struct clk_hw *hw)
+{
+ u32 tmp;
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct at91_pmc *pmc = prog->pmc;
+ const struct clk_programmable_layout *layout = prog->layout;
+ u8 id = prog->id;
+ u32 mask = PROG_STATUS_MASK(id);
+
+ tmp = prog->css | (prog->pres << layout->pres_shift);
+ if (layout->have_slck_mck && prog->slckmck)
+ tmp |= AT91_PMC_CSSMCK_MCK;
+
+ pmc_write(pmc, AT91_PMC_PCKR(id), tmp);
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & mask))
+ wait_event(prog->wait, pmc_read(pmc, AT91_PMC_SR) & mask);
+
+ return 0;
+}
+
+static int clk_programmable_is_ready(struct clk_hw *hw)
+{
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct at91_pmc *pmc = prog->pmc;
+
+ return !!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_PCKR(prog->id));
+}
+
+static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct at91_pmc *pmc = prog->pmc;
+ const struct clk_programmable_layout *layout = prog->layout;
+
+ tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
+ prog->pres = (tmp >> layout->pres_shift) & PROG_PRES_MASK;
+
+ return parent_rate >> prog->pres;
+}
+
+static long clk_programmable_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long best_rate = *parent_rate;
+ unsigned long best_diff;
+ unsigned long new_diff;
+ unsigned long cur_rate;
+ int shift = shift;
+
+ if (rate > *parent_rate)
+ return *parent_rate;
+ else
+ best_diff = *parent_rate - rate;
+
+ if (!best_diff)
+ return best_rate;
+
+ for (shift = 1; shift < PROG_PRES_MASK; shift++) {
+ cur_rate = *parent_rate >> shift;
+
+ if (cur_rate > rate)
+ new_diff = cur_rate - rate;
+ else
+ new_diff = rate - cur_rate;
+
+ if (!new_diff)
+ return cur_rate;
+
+ if (new_diff < best_diff) {
+ best_diff = new_diff;
+ best_rate = cur_rate;
+ }
+
+ if (rate > cur_rate)
+ break;
+ }
+
+ return best_rate;
+}
+
+static int clk_programmable_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ const struct clk_programmable_layout *layout = prog->layout;
+ if (index > layout->css_mask) {
+ if (index > PROG_MAX_RM9200_CSS && layout->have_slck_mck) {
+ prog->css = 0;
+ prog->slckmck = 1;
+ return 0;
+ } else {
+ return -EINVAL;
+ }
+ }
+
+ prog->css = index;
+ return 0;
+}
+
+static u8 clk_programmable_get_parent(struct clk_hw *hw)
+{
+ u32 tmp;
+ u8 ret;
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ struct at91_pmc *pmc = prog->pmc;
+ const struct clk_programmable_layout *layout = prog->layout;
+
+ tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id));
+ prog->css = tmp & layout->css_mask;
+ ret = prog->css;
+ if (layout->have_slck_mck) {
+ prog->slckmck = !!(tmp & AT91_PMC_CSSMCK_MCK);
+ if (prog->slckmck && !ret)
+ ret = PROG_MAX_RM9200_CSS + 1;
+ }
+
+ return ret;
+}
+
+static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_programmable *prog = to_clk_programmable(hw);
+ unsigned long best_rate = parent_rate;
+ unsigned long best_diff;
+ unsigned long new_diff;
+ unsigned long cur_rate;
+ int shift = 0;
+
+ if (rate > parent_rate)
+ return parent_rate;
+ else
+ best_diff = parent_rate - rate;
+
+ if (!best_diff) {
+ prog->pres = shift;
+ return 0;
+ }
+
+ for (shift = 1; shift < PROG_PRES_MASK; shift++) {
+ cur_rate = parent_rate >> shift;
+
+ if (cur_rate > rate)
+ new_diff = cur_rate - rate;
+ else
+ new_diff = rate - cur_rate;
+
+ if (!new_diff)
+ break;
+
+ if (new_diff < best_diff) {
+ best_diff = new_diff;
+ best_rate = cur_rate;
+ }
+
+ if (rate > cur_rate)
+ break;
+ }
+
+ prog->pres = shift;
+ return 0;
+}
+
+static const struct clk_ops programmable_ops = {
+ .prepare = clk_programmable_prepare,
+ .is_prepared = clk_programmable_is_ready,
+ .recalc_rate = clk_programmable_recalc_rate,
+ .round_rate = clk_programmable_round_rate,
+ .get_parent = clk_programmable_get_parent,
+ .set_parent = clk_programmable_set_parent,
+ .set_rate = clk_programmable_set_rate,
+};
+
+static struct clk * __init
+at91_clk_register_programmable(struct at91_pmc *pmc, unsigned int irq,
+ const char *name, const char **parent_names,
+ u8 num_parents, u8 id,
+ const struct clk_programmable_layout *layout)
+{
+ int ret;
+ struct clk_programmable *prog;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+ char irq_name[11];
+
+ if (id > PROG_ID_MAX)
+ return ERR_PTR(-EINVAL);
+
+ prog = kzalloc(sizeof(*prog), GFP_KERNEL);
+ if (!prog)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &programmable_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+ prog->id = id;
+ prog->layout = layout;
+ prog->hw.init = &init;
+ prog->pmc = pmc;
+ prog->irq = irq;
+ init_waitqueue_head(&prog->wait);
+ irq_set_status_flags(prog->irq, IRQ_NOAUTOEN);
+ snprintf(irq_name, sizeof(irq_name), "clk-prog%d", id);
+ ret = request_irq(prog->irq, clk_programmable_irq_handler,
+ IRQF_TRIGGER_HIGH, irq_name, prog);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &prog->hw);
+ if (IS_ERR(clk))
+ kfree(prog);
+
+ return clk;
+}
+
+static const struct clk_programmable_layout at91rm9200_programmable_layout = {
+ .pres_shift = 2,
+ .css_mask = 0x3,
+ .have_slck_mck = 0,
+};
+
+static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
+ .pres_shift = 2,
+ .css_mask = 0x3,
+ .have_slck_mck = 1,
+};
+
+static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
+ .pres_shift = 4,
+ .css_mask = 0x7,
+ .have_slck_mck = 0,
+};
+
+static void __init
+of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc,
+ const struct clk_programmable_layout *layout)
+{
+ int num;
+ u32 id;
+ int i;
+ unsigned int irq;
+ struct clk *clk;
+ int num_parents;
+ const char *parent_names[PROG_SOURCE_MAX];
+ const char *name;
+ struct device_node *progclknp;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX)
+ return;
+
+ for (i = 0; i < num_parents; ++i) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ num = of_get_child_count(np);
+ if (!num || num > (PROG_ID_MAX + 1))
+ return;
+
+ for_each_child_of_node(np, progclknp) {
+ if (of_property_read_u32(progclknp, "reg", &id))
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = progclknp->name;
+
+ irq = irq_of_parse_and_map(progclknp, 0);
+ if (!irq)
+ continue;
+
+ clk = at91_clk_register_programmable(pmc, irq, name,
+ parent_names, num_parents,
+ id, layout);
+ if (IS_ERR(clk))
+ continue;
+
+ of_clk_add_provider(progclknp, of_clk_src_simple_get, clk);
+ }
+}
+
+
+void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_prog_setup(np, pmc, &at91rm9200_programmable_layout);
+}
+
+void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_prog_setup(np, pmc, &at91sam9g45_programmable_layout);
+}
+
+void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_prog_setup(np, pmc, &at91sam9x5_programmable_layout);
+}
diff --git a/drivers/clk/at91/clk-smd.c b/drivers/clk/at91/clk-smd.c
new file mode 100644
index 0000000..144d47e
--- /dev/null
+++ b/drivers/clk/at91/clk-smd.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define SMD_SOURCE_MAX 2
+
+#define SMD_DIV_SHIFT 8
+#define SMD_MAX_DIV 0xf
+
+struct at91sam9x5_clk_smd {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+#define to_at91sam9x5_clk_smd(hw) \
+ container_of(hw, struct at91sam9x5_clk_smd, hw)
+
+static unsigned long at91sam9x5_clk_smd_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ u8 smddiv;
+ struct at91sam9x5_clk_smd *smd = to_at91sam9x5_clk_smd(hw);
+ struct at91_pmc *pmc = smd->pmc;
+
+ tmp = pmc_read(pmc, AT91_PMC_SMD);
+ smddiv = (tmp & AT91_PMC_SMD_DIV) >> SMD_DIV_SHIFT;
+ return parent_rate / (smddiv + 1);
+}
+
+static long at91sam9x5_clk_smd_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long div;
+ unsigned long bestrate;
+ unsigned long tmp;
+
+ if (rate >= *parent_rate)
+ return *parent_rate;
+
+ div = *parent_rate / rate;
+ if (div > SMD_MAX_DIV)
+ return *parent_rate / (SMD_MAX_DIV + 1);
+
+ bestrate = *parent_rate / div;
+ tmp = *parent_rate / (div + 1);
+ if (bestrate - rate > rate - tmp)
+ bestrate = tmp;
+
+ return bestrate;
+}
+
+static int at91sam9x5_clk_smd_set_parent(struct clk_hw *hw, u8 index)
+{
+ u32 tmp;
+ struct at91sam9x5_clk_smd *smd = to_at91sam9x5_clk_smd(hw);
+ struct at91_pmc *pmc = smd->pmc;
+
+ if (index > 1)
+ return -EINVAL;
+ tmp = pmc_read(pmc, AT91_PMC_SMD) & ~AT91_PMC_SMDS;
+ if (index)
+ tmp |= AT91_PMC_SMDS;
+ pmc_write(pmc, AT91_PMC_SMD, tmp);
+ return 0;
+}
+
+static u8 at91sam9x5_clk_smd_get_parent(struct clk_hw *hw)
+{
+ struct at91sam9x5_clk_smd *smd = to_at91sam9x5_clk_smd(hw);
+ struct at91_pmc *pmc = smd->pmc;
+
+ return pmc_read(pmc, AT91_PMC_SMD) & AT91_PMC_SMDS;
+}
+
+static int at91sam9x5_clk_smd_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ struct at91sam9x5_clk_smd *smd = to_at91sam9x5_clk_smd(hw);
+ struct at91_pmc *pmc = smd->pmc;
+ unsigned long div = parent_rate / rate;
+
+ if (parent_rate % rate || div < 1 || div > (SMD_MAX_DIV + 1))
+ return -EINVAL;
+ tmp = pmc_read(pmc, AT91_PMC_SMD) & ~AT91_PMC_SMD_DIV;
+ tmp |= (div - 1) << SMD_DIV_SHIFT;
+ pmc_write(pmc, AT91_PMC_SMD, tmp);
+
+ return 0;
+}
+
+static const struct clk_ops at91sam9x5_smd_ops = {
+ .recalc_rate = at91sam9x5_clk_smd_recalc_rate,
+ .round_rate = at91sam9x5_clk_smd_round_rate,
+ .get_parent = at91sam9x5_clk_smd_get_parent,
+ .set_parent = at91sam9x5_clk_smd_set_parent,
+ .set_rate = at91sam9x5_clk_smd_set_rate,
+};
+
+static struct clk * __init
+at91sam9x5_clk_register_smd(struct at91_pmc *pmc, const char *name,
+ const char **parent_names, u8 num_parents)
+{
+ struct at91sam9x5_clk_smd *smd;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ smd = kzalloc(sizeof(*smd), GFP_KERNEL);
+ if (!smd)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &at91sam9x5_smd_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+ smd->hw.init = &init;
+ smd->pmc = pmc;
+
+ clk = clk_register(NULL, &smd->hw);
+ if (IS_ERR(clk))
+ kfree(smd);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ int i;
+ int num_parents;
+ const char *parent_names[SMD_SOURCE_MAX];
+ const char *name = np->name;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > SMD_SOURCE_MAX)
+ return;
+
+ for (i = 0; i < num_parents; i++) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91sam9x5_clk_register_smd(pmc, name, parent_names,
+ num_parents);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
new file mode 100644
index 0000000..8f7c043
--- /dev/null
+++ b/drivers/clk/at91/clk-system.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define SYSTEM_MAX_ID 31
+
+#define SYSTEM_MAX_NAME_SZ 32
+
+#define to_clk_system(hw) container_of(hw, struct clk_system, hw)
+struct clk_system {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ u8 id;
+};
+
+static int clk_system_enable(struct clk_hw *hw)
+{
+ struct clk_system *sys = to_clk_system(hw);
+ struct at91_pmc *pmc = sys->pmc;
+
+ pmc_write(pmc, AT91_PMC_SCER, 1 << sys->id);
+ return 0;
+}
+
+static void clk_system_disable(struct clk_hw *hw)
+{
+ struct clk_system *sys = to_clk_system(hw);
+ struct at91_pmc *pmc = sys->pmc;
+
+ pmc_write(pmc, AT91_PMC_SCDR, 1 << sys->id);
+}
+
+static int clk_system_is_enabled(struct clk_hw *hw)
+{
+ struct clk_system *sys = to_clk_system(hw);
+ struct at91_pmc *pmc = sys->pmc;
+
+ return !!(pmc_read(pmc, AT91_PMC_SCSR) & (1 << sys->id));
+}
+
+static const struct clk_ops system_ops = {
+ .enable = clk_system_enable,
+ .disable = clk_system_disable,
+ .is_enabled = clk_system_is_enabled,
+};
+
+static struct clk * __init
+at91_clk_register_system(struct at91_pmc *pmc, const char *name,
+ const char *parent_name, u8 id)
+{
+ struct clk_system *sys;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ if (!parent_name || id > SYSTEM_MAX_ID)
+ return ERR_PTR(-EINVAL);
+
+ sys = kzalloc(sizeof(*sys), GFP_KERNEL);
+ if (!sys)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &system_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ /*
+ * CLK_IGNORE_UNUSED is used to avoid ddrck switch off.
+ * TODO : we should implement a driver supporting at91 ddr controller
+ * (see drivers/memory) which would request and enable the ddrck clock.
+ * When this is done we will be able to remove CLK_IGNORE_UNUSED flag.
+ */
+ init.flags = CLK_IGNORE_UNUSED;
+
+ sys->id = id;
+ sys->hw.init = &init;
+ sys->pmc = pmc;
+
+ clk = clk_register(NULL, &sys->hw);
+ if (IS_ERR(clk))
+ kfree(sys);
+
+ return clk;
+}
+
+static void __init
+of_at91_clk_sys_setup(struct device_node *np, struct at91_pmc *pmc)
+{
+ int num;
+ u32 id;
+ struct clk *clk;
+ const char *name;
+ struct device_node *sysclknp;
+ const char *parent_name;
+
+ num = of_get_child_count(np);
+ if (num > (SYSTEM_MAX_ID + 1))
+ return;
+
+ for_each_child_of_node(np, sysclknp) {
+ if (of_property_read_u32(sysclknp, "reg", &id))
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = sysclknp->name;
+
+ parent_name = of_clk_get_parent_name(sysclknp, 0);
+
+ clk = at91_clk_register_system(pmc, name, parent_name, id);
+ if (IS_ERR(clk))
+ continue;
+
+ of_clk_add_provider(sysclknp, of_clk_src_simple_get, clk);
+ }
+}
+
+void __init of_at91rm9200_clk_sys_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_sys_setup(np, pmc);
+}
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
new file mode 100644
index 0000000..7d1d26a
--- /dev/null
+++ b/drivers/clk/at91/clk-usb.c
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include "pmc.h"
+
+#define USB_SOURCE_MAX 2
+
+#define SAM9X5_USB_DIV_SHIFT 8
+#define SAM9X5_USB_MAX_DIV 0xf
+
+#define RM9200_USB_DIV_SHIFT 28
+#define RM9200_USB_DIV_TAB_SIZE 4
+
+struct at91sam9x5_clk_usb {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+};
+
+#define to_at91sam9x5_clk_usb(hw) \
+ container_of(hw, struct at91sam9x5_clk_usb, hw)
+
+struct at91rm9200_clk_usb {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ u32 divisors[4];
+};
+
+#define to_at91rm9200_clk_usb(hw) \
+ container_of(hw, struct at91rm9200_clk_usb, hw)
+
+static unsigned long at91sam9x5_clk_usb_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ u8 usbdiv;
+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+
+ tmp = pmc_read(pmc, AT91_PMC_USB);
+ usbdiv = (tmp & AT91_PMC_OHCIUSBDIV) >> SAM9X5_USB_DIV_SHIFT;
+ return parent_rate / (usbdiv + 1);
+}
+
+static long at91sam9x5_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long div;
+ unsigned long bestrate;
+ unsigned long tmp;
+
+ if (rate >= *parent_rate)
+ return *parent_rate;
+
+ div = *parent_rate / rate;
+ if (div >= SAM9X5_USB_MAX_DIV)
+ return *parent_rate / (SAM9X5_USB_MAX_DIV + 1);
+
+ bestrate = *parent_rate / div;
+ tmp = *parent_rate / (div + 1);
+ if (bestrate - rate > rate - tmp)
+ bestrate = tmp;
+
+ return bestrate;
+}
+
+static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index)
+{
+ u32 tmp;
+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+
+ if (index > 1)
+ return -EINVAL;
+ tmp = pmc_read(pmc, AT91_PMC_USB) & ~AT91_PMC_USBS;
+ if (index)
+ tmp |= AT91_PMC_USBS;
+ pmc_write(pmc, AT91_PMC_USB, tmp);
+ return 0;
+}
+
+static u8 at91sam9x5_clk_usb_get_parent(struct clk_hw *hw)
+{
+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+
+ return pmc_read(pmc, AT91_PMC_USB) & AT91_PMC_USBS;
+}
+
+static int at91sam9x5_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+ unsigned long div = parent_rate / rate;
+
+ if (parent_rate % rate || div < 1 || div >= SAM9X5_USB_MAX_DIV)
+ return -EINVAL;
+
+ tmp = pmc_read(pmc, AT91_PMC_USB) & ~AT91_PMC_OHCIUSBDIV;
+ tmp |= (div - 1) << SAM9X5_USB_DIV_SHIFT;
+ pmc_write(pmc, AT91_PMC_USB, tmp);
+
+ return 0;
+}
+
+static const struct clk_ops at91sam9x5_usb_ops = {
+ .recalc_rate = at91sam9x5_clk_usb_recalc_rate,
+ .round_rate = at91sam9x5_clk_usb_round_rate,
+ .get_parent = at91sam9x5_clk_usb_get_parent,
+ .set_parent = at91sam9x5_clk_usb_set_parent,
+ .set_rate = at91sam9x5_clk_usb_set_rate,
+};
+
+static int at91sam9n12_clk_usb_enable(struct clk_hw *hw)
+{
+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+
+ pmc_write(pmc, AT91_PMC_USB,
+ pmc_read(pmc, AT91_PMC_USB) | AT91_PMC_USBS);
+ return 0;
+}
+
+static void at91sam9n12_clk_usb_disable(struct clk_hw *hw)
+{
+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+
+ pmc_write(pmc, AT91_PMC_USB,
+ pmc_read(pmc, AT91_PMC_USB) & ~AT91_PMC_USBS);
+}
+
+static int at91sam9n12_clk_usb_is_enabled(struct clk_hw *hw)
+{
+ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+
+ return !!(pmc_read(pmc, AT91_PMC_USB) & AT91_PMC_USBS);
+}
+
+static const struct clk_ops at91sam9n12_usb_ops = {
+ .enable = at91sam9n12_clk_usb_enable,
+ .disable = at91sam9n12_clk_usb_disable,
+ .is_enabled = at91sam9n12_clk_usb_is_enabled,
+ .recalc_rate = at91sam9x5_clk_usb_recalc_rate,
+ .round_rate = at91sam9x5_clk_usb_round_rate,
+ .set_rate = at91sam9x5_clk_usb_set_rate,
+};
+
+static struct clk * __init
+at91sam9x5_clk_register_usb(struct at91_pmc *pmc, const char *name,
+ const char **parent_names, u8 num_parents)
+{
+ struct at91sam9x5_clk_usb *usb;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+ if (!usb)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &at91sam9x5_usb_ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+ init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+ usb->hw.init = &init;
+ usb->pmc = pmc;
+
+ clk = clk_register(NULL, &usb->hw);
+ if (IS_ERR(clk))
+ kfree(usb);
+
+ return clk;
+}
+
+static struct clk * __init
+at91sam9n12_clk_register_usb(struct at91_pmc *pmc, const char *name,
+ const char *parent_name)
+{
+ struct at91sam9x5_clk_usb *usb;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+ if (!usb)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &at91sam9n12_usb_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_SET_RATE_GATE;
+
+ usb->hw.init = &init;
+ usb->pmc = pmc;
+
+ clk = clk_register(NULL, &usb->hw);
+ if (IS_ERR(clk))
+ kfree(usb);
+
+ return clk;
+}
+
+static unsigned long at91rm9200_clk_usb_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+ u32 tmp;
+ u8 usbdiv;
+
+ tmp = pmc_read(pmc, AT91_CKGR_PLLBR);
+ usbdiv = (tmp & AT91_PMC_USBDIV) >> RM9200_USB_DIV_SHIFT;
+ if (usb->divisors[usbdiv])
+ return parent_rate / usb->divisors[usbdiv];
+
+ return 0;
+}
+
+static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw);
+ unsigned long bestrate = 0;
+ int bestdiff = -1;
+ unsigned long tmprate;
+ int tmpdiff;
+ int i = 0;
+
+ for (i = 0; i < 4; i++) {
+ if (!usb->divisors[i])
+ continue;
+ tmprate = *parent_rate / usb->divisors[i];
+ if (tmprate < rate)
+ tmpdiff = rate - tmprate;
+ else
+ tmpdiff = tmprate - rate;
+
+ if (bestdiff < 0 || bestdiff > tmpdiff) {
+ bestrate = tmprate;
+ bestdiff = tmpdiff;
+ }
+
+ if (!bestdiff)
+ break;
+ }
+
+ return bestrate;
+}
+
+static int at91rm9200_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u32 tmp;
+ int i;
+ struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw);
+ struct at91_pmc *pmc = usb->pmc;
+ unsigned long div = parent_rate / rate;
+
+ if (parent_rate % rate)
+ return -EINVAL;
+ for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) {
+ if (usb->divisors[i] == div) {
+ tmp = pmc_read(pmc, AT91_CKGR_PLLBR) &
+ ~AT91_PMC_USBDIV;
+ tmp |= i << RM9200_USB_DIV_SHIFT;
+ pmc_write(pmc, AT91_CKGR_PLLBR, tmp);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static const struct clk_ops at91rm9200_usb_ops = {
+ .recalc_rate = at91rm9200_clk_usb_recalc_rate,
+ .round_rate = at91rm9200_clk_usb_round_rate,
+ .set_rate = at91rm9200_clk_usb_set_rate,
+};
+
+static struct clk * __init
+at91rm9200_clk_register_usb(struct at91_pmc *pmc, const char *name,
+ const char *parent_name, const u32 *divisors)
+{
+ struct at91rm9200_clk_usb *usb;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+ if (!usb)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &at91rm9200_usb_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+
+ usb->hw.init = &init;
+ usb->pmc = pmc;
+ memcpy(usb->divisors, divisors, sizeof(usb->divisors));
+
+ clk = clk_register(NULL, &usb->hw);
+ if (IS_ERR(clk))
+ kfree(usb);
+
+ return clk;
+}
+
+void __init of_at91sam9x5_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ int i;
+ int num_parents;
+ const char *parent_names[USB_SOURCE_MAX];
+ const char *name = np->name;
+
+ num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+ if (num_parents <= 0 || num_parents > USB_SOURCE_MAX)
+ return;
+
+ for (i = 0; i < num_parents; i++) {
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ if (!parent_names[i])
+ return;
+ }
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91sam9x5_clk_register_usb(pmc, name, parent_names, num_parents);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+void __init of_at91sam9n12_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91sam9n12_clk_register_usb(pmc, name, parent_name);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
+
+void __init of_at91rm9200_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+ u32 divisors[4] = {0, 0, 0, 0};
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4);
+ if (!divisors[0])
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ clk = at91rm9200_clk_register_usb(pmc, name, parent_name, divisors);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+}
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
new file mode 100644
index 0000000..ae3263b
--- /dev/null
+++ b/drivers/clk/at91/clk-utmi.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "pmc.h"
+
+#define UTMI_FIXED_MUL 40
+
+struct clk_utmi {
+ struct clk_hw hw;
+ struct at91_pmc *pmc;
+ unsigned int irq;
+ wait_queue_head_t wait;
+};
+
+#define to_clk_utmi(hw) container_of(hw, struct clk_utmi, hw)
+
+static irqreturn_t clk_utmi_irq_handler(int irq, void *dev_id)
+{
+ struct clk_utmi *utmi = (struct clk_utmi *)dev_id;
+
+ wake_up(&utmi->wait);
+ disable_irq_nosync(utmi->irq);
+
+ return IRQ_HANDLED;
+}
+
+static int clk_utmi_prepare(struct clk_hw *hw)
+{
+ struct clk_utmi *utmi = to_clk_utmi(hw);
+ struct at91_pmc *pmc = utmi->pmc;
+ u32 tmp = at91_pmc_read(AT91_CKGR_UCKR) | AT91_PMC_UPLLEN |
+ AT91_PMC_UPLLCOUNT | AT91_PMC_BIASEN;
+
+ pmc_write(pmc, AT91_CKGR_UCKR, tmp);
+
+ while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_LOCKU)) {
+ enable_irq(utmi->irq);
+ wait_event(utmi->wait,
+ pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_LOCKU);
+ }
+
+ return 0;
+}
+
+static int clk_utmi_is_prepared(struct clk_hw *hw)
+{
+ struct clk_utmi *utmi = to_clk_utmi(hw);
+ struct at91_pmc *pmc = utmi->pmc;
+
+ return !!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_LOCKU);
+}
+
+static void clk_utmi_unprepare(struct clk_hw *hw)
+{
+ struct clk_utmi *utmi = to_clk_utmi(hw);
+ struct at91_pmc *pmc = utmi->pmc;
+ u32 tmp = at91_pmc_read(AT91_CKGR_UCKR) & ~AT91_PMC_UPLLEN;
+
+ pmc_write(pmc, AT91_CKGR_UCKR, tmp);
+}
+
+static unsigned long clk_utmi_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ /* UTMI clk is a fixed clk multiplier */
+ return parent_rate * UTMI_FIXED_MUL;
+}
+
+static const struct clk_ops utmi_ops = {
+ .prepare = clk_utmi_prepare,
+ .unprepare = clk_utmi_unprepare,
+ .is_prepared = clk_utmi_is_prepared,
+ .recalc_rate = clk_utmi_recalc_rate,
+};
+
+static struct clk * __init
+at91_clk_register_utmi(struct at91_pmc *pmc, unsigned int irq,
+ const char *name, const char *parent_name)
+{
+ int ret;
+ struct clk_utmi *utmi;
+ struct clk *clk = NULL;
+ struct clk_init_data init;
+
+ utmi = kzalloc(sizeof(*utmi), GFP_KERNEL);
+ if (!utmi)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &utmi_ops;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+ init.flags = CLK_SET_RATE_GATE;
+
+ utmi->hw.init = &init;
+ utmi->pmc = pmc;
+ utmi->irq = irq;
+ init_waitqueue_head(&utmi->wait);
+ irq_set_status_flags(utmi->irq, IRQ_NOAUTOEN);
+ ret = request_irq(utmi->irq, clk_utmi_irq_handler,
+ IRQF_TRIGGER_HIGH, "clk-utmi", utmi);
+ if (ret)
+ return ERR_PTR(ret);
+
+ clk = clk_register(NULL, &utmi->hw);
+ if (IS_ERR(clk))
+ kfree(utmi);
+
+ return clk;
+}
+
+static void __init
+of_at91_clk_utmi_setup(struct device_node *np, struct at91_pmc *pmc)
+{
+ unsigned int irq;
+ struct clk *clk;
+ const char *parent_name;
+ const char *name = np->name;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq)
+ return;
+
+ clk = at91_clk_register_utmi(pmc, irq, name, parent_name);
+ if (IS_ERR(clk))
+ return;
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+}
+
+void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np,
+ struct at91_pmc *pmc)
+{
+ of_at91_clk_utmi_setup(np, pmc);
+}
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
new file mode 100644
index 0000000..7b9db60
--- /dev/null
+++ b/drivers/clk/at91/pmc.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+
+#include <asm/proc-fns.h>
+
+#include "pmc.h"
+
+void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
+
+void at91sam9_idle(void)
+{
+ at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
+int of_at91_get_clk_range(struct device_node *np, const char *propname,
+ struct clk_range *range)
+{
+ u32 min, max;
+ int ret;
+
+ ret = of_property_read_u32_index(np, propname, 0, &min);
+ if (ret)
+ return ret;
+
+ ret = of_property_read_u32_index(np, propname, 1, &max);
+ if (ret)
+ return ret;
+
+ if (range) {
+ range->min = min;
+ range->max = max;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(of_at91_get_clk_range);
+
+static void pmc_irq_mask(struct irq_data *d)
+{
+ struct at91_pmc *pmc = irq_data_get_irq_chip_data(d);
+
+ pmc_write(pmc, AT91_PMC_IDR, 1 << d->hwirq);
+}
+
+static void pmc_irq_unmask(struct irq_data *d)
+{
+ struct at91_pmc *pmc = irq_data_get_irq_chip_data(d);
+
+ pmc_write(pmc, AT91_PMC_IER, 1 << d->hwirq);
+}
+
+static int pmc_irq_set_type(struct irq_data *d, unsigned type)
+{
+ if (type != IRQ_TYPE_LEVEL_HIGH) {
+ pr_warn("PMC: type not supported (support only IRQ_TYPE_LEVEL_HIGH type)\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip pmc_irq = {
+ .name = "PMC",
+ .irq_disable = pmc_irq_mask,
+ .irq_mask = pmc_irq_mask,
+ .irq_unmask = pmc_irq_unmask,
+ .irq_set_type = pmc_irq_set_type,
+};
+
+static struct lock_class_key pmc_lock_class;
+
+static int pmc_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct at91_pmc *pmc = h->host_data;
+
+ irq_set_lockdep_class(virq, &pmc_lock_class);
+
+ irq_set_chip_and_handler(virq, &pmc_irq,
+ handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ irq_set_chip_data(virq, pmc);
+
+ return 0;
+}
+
+static int pmc_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *ctrlr,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_type)
+{
+ struct at91_pmc *pmc = d->host_data;
+ const struct at91_pmc_caps *caps = pmc->caps;
+
+ if (WARN_ON(intsize < 1))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+
+ if (!(caps->available_irqs & (1 << *out_hwirq)))
+ return -EINVAL;
+
+ *out_type = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
+static struct irq_domain_ops pmc_irq_ops = {
+ .map = pmc_irq_map,
+ .xlate = pmc_irq_domain_xlate,
+};
+
+static irqreturn_t pmc_irq_handler(int irq, void *data)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)data;
+ unsigned long sr;
+ int n;
+
+ sr = pmc_read(pmc, AT91_PMC_SR) & pmc_read(pmc, AT91_PMC_IMR);
+ if (!sr)
+ return IRQ_NONE;
+
+ for_each_set_bit(n, &sr, BITS_PER_LONG)
+ generic_handle_irq(irq_find_mapping(pmc->irqdomain, n));
+
+ return IRQ_HANDLED;
+}
+
+static const struct at91_pmc_caps at91rm9200_caps = {
+ .available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_LOCKB |
+ AT91_PMC_MCKRDY | AT91_PMC_PCK0RDY |
+ AT91_PMC_PCK1RDY | AT91_PMC_PCK2RDY |
+ AT91_PMC_PCK3RDY,
+};
+
+static const struct at91_pmc_caps at91sam9260_caps = {
+ .available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_LOCKB |
+ AT91_PMC_MCKRDY | AT91_PMC_PCK0RDY |
+ AT91_PMC_PCK1RDY,
+};
+
+static const struct at91_pmc_caps at91sam9g45_caps = {
+ .available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_MCKRDY |
+ AT91_PMC_LOCKU | AT91_PMC_PCK0RDY |
+ AT91_PMC_PCK1RDY,
+};
+
+static const struct at91_pmc_caps at91sam9n12_caps = {
+ .available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_LOCKB |
+ AT91_PMC_MCKRDY | AT91_PMC_PCK0RDY |
+ AT91_PMC_PCK1RDY | AT91_PMC_MOSCSELS |
+ AT91_PMC_MOSCRCS | AT91_PMC_CFDEV,
+};
+
+static const struct at91_pmc_caps at91sam9x5_caps = {
+ .available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_MCKRDY |
+ AT91_PMC_LOCKU | AT91_PMC_PCK0RDY |
+ AT91_PMC_PCK1RDY | AT91_PMC_MOSCSELS |
+ AT91_PMC_MOSCRCS | AT91_PMC_CFDEV,
+};
+
+static const struct at91_pmc_caps sama5d3_caps = {
+ .available_irqs = AT91_PMC_MOSCS | AT91_PMC_LOCKA | AT91_PMC_MCKRDY |
+ AT91_PMC_LOCKU | AT91_PMC_PCK0RDY |
+ AT91_PMC_PCK1RDY | AT91_PMC_PCK2RDY |
+ AT91_PMC_MOSCSELS | AT91_PMC_MOSCRCS |
+ AT91_PMC_CFDEV,
+};
+
+static struct at91_pmc *__init at91_pmc_init(struct device_node *np,
+ void __iomem *regbase, int virq,
+ const struct at91_pmc_caps *caps)
+{
+ struct at91_pmc *pmc;
+
+ if (!regbase || !virq || !caps)
+ return NULL;
+
+ at91_pmc_base = regbase;
+
+ pmc = kzalloc(sizeof(*pmc), GFP_KERNEL);
+ if (!pmc)
+ return NULL;
+
+ spin_lock_init(&pmc->lock);
+ pmc->regbase = regbase;
+ pmc->virq = virq;
+ pmc->caps = caps;
+
+ pmc->irqdomain = irq_domain_add_linear(np, 32, &pmc_irq_ops, pmc);
+
+ if (!pmc->irqdomain)
+ goto out_free_pmc;
+
+ pmc_write(pmc, AT91_PMC_IDR, 0xffffffff);
+ if (request_irq(pmc->virq, pmc_irq_handler, IRQF_SHARED, "pmc", pmc))
+ goto out_remove_irqdomain;
+
+ return pmc;
+
+out_remove_irqdomain:
+ irq_domain_remove(pmc->irqdomain);
+out_free_pmc:
+ kfree(pmc);
+
+ return NULL;
+}
+
+static const struct of_device_id pmc_clk_ids[] __initdata = {
+ /* Main clock */
+ {
+ .compatible = "atmel,at91rm9200-clk-main",
+ .data = of_at91rm9200_clk_main_setup,
+ },
+ /* PLL clocks */
+ {
+ .compatible = "atmel,at91rm9200-clk-pll",
+ .data = of_at91rm9200_clk_pll_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9g45-clk-pll",
+ .data = of_at91sam9g45_clk_pll_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9g20-clk-pllb",
+ .data = of_at91sam9g20_clk_pllb_setup,
+ },
+ {
+ .compatible = "atmel,sama5d3-clk-pll",
+ .data = of_sama5d3_clk_pll_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-plldiv",
+ .data = of_at91sam9x5_clk_plldiv_setup,
+ },
+ /* Master clock */
+ {
+ .compatible = "atmel,at91rm9200-clk-master",
+ .data = of_at91rm9200_clk_master_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-master",
+ .data = of_at91sam9x5_clk_master_setup,
+ },
+ /* System clocks */
+ {
+ .compatible = "atmel,at91rm9200-clk-system",
+ .data = of_at91rm9200_clk_sys_setup,
+ },
+ /* Peripheral clocks */
+ {
+ .compatible = "atmel,at91rm9200-clk-peripheral",
+ .data = of_at91rm9200_clk_periph_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-peripheral",
+ .data = of_at91sam9x5_clk_periph_setup,
+ },
+ /* Programmable clocks */
+#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
+ {
+ .compatible = "atmel,at91rm9200-clk-programmable",
+ .data = of_at91rm9200_clk_prog_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9g45-clk-programmable",
+ .data = of_at91sam9g45_clk_prog_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-programmable",
+ .data = of_at91sam9x5_clk_prog_setup,
+ },
+#endif
+ /* UTMI clock */
+#if defined(CONFIG_HAVE_AT91_UTMI)
+ {
+ .compatible = "atmel,at91sam9x5-clk-utmi",
+ .data = of_at91sam9x5_clk_utmi_setup,
+ },
+#endif
+ /* USB clock */
+#if defined(CONFIG_HAVE_AT91_USB_CLK)
+ {
+ .compatible = "atmel,at91rm9200-clk-usb",
+ .data = of_at91rm9200_clk_usb_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-usb",
+ .data = of_at91sam9x5_clk_usb_setup,
+ },
+ {
+ .compatible = "atmel,at91sam9n12-clk-usb",
+ .data = of_at91sam9n12_clk_usb_setup,
+ },
+#endif
+ /* SMD clock */
+#if defined(CONFIG_HAVE_AT91_SMD)
+ {
+ .compatible = "atmel,at91sam9x5-clk-smd",
+ .data = of_at91sam9x5_clk_smd_setup,
+ },
+#endif
+ { /*sentinel*/ }
+};
+
+static void __init of_at91_pmc_setup(struct device_node *np,
+ const struct at91_pmc_caps *caps)
+{
+ struct at91_pmc *pmc;
+ struct device_node *childnp;
+ void (*clk_setup)(struct device_node *, struct at91_pmc *);
+ const struct of_device_id *clk_id;
+ void __iomem *regbase = of_iomap(np, 0);
+ int virq;
+
+ if (!regbase)
+ return;
+
+ virq = irq_of_parse_and_map(np, 0);
+ if (!virq)
+ return;
+
+ pmc = at91_pmc_init(np, regbase, virq, caps);
+ if (!pmc)
+ return;
+ for_each_child_of_node(np, childnp) {
+ clk_id = of_match_node(pmc_clk_ids, childnp);
+ if (!clk_id)
+ continue;
+ clk_setup = clk_id->data;
+ clk_setup(childnp, pmc);
+ }
+}
+
+static void __init of_at91rm9200_pmc_setup(struct device_node *np)
+{
+ of_at91_pmc_setup(np, &at91rm9200_caps);
+}
+CLK_OF_DECLARE(at91rm9200_clk_pmc, "atmel,at91rm9200-pmc",
+ of_at91rm9200_pmc_setup);
+
+static void __init of_at91sam9260_pmc_setup(struct device_node *np)
+{
+ of_at91_pmc_setup(np, &at91sam9260_caps);
+}
+CLK_OF_DECLARE(at91sam9260_clk_pmc, "atmel,at91sam9260-pmc",
+ of_at91sam9260_pmc_setup);
+
+static void __init of_at91sam9g45_pmc_setup(struct device_node *np)
+{
+ of_at91_pmc_setup(np, &at91sam9g45_caps);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_pmc, "atmel,at91sam9g45-pmc",
+ of_at91sam9g45_pmc_setup);
+
+static void __init of_at91sam9n12_pmc_setup(struct device_node *np)
+{
+ of_at91_pmc_setup(np, &at91sam9n12_caps);
+}
+CLK_OF_DECLARE(at91sam9n12_clk_pmc, "atmel,at91sam9n12-pmc",
+ of_at91sam9n12_pmc_setup);
+
+static void __init of_at91sam9x5_pmc_setup(struct device_node *np)
+{
+ of_at91_pmc_setup(np, &at91sam9x5_caps);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_pmc, "atmel,at91sam9x5-pmc",
+ of_at91sam9x5_pmc_setup);
+
+static void __init of_sama5d3_pmc_setup(struct device_node *np)
+{
+ of_at91_pmc_setup(np, &sama5d3_caps);
+}
+CLK_OF_DECLARE(sama5d3_clk_pmc, "atmel,sama5d3-pmc",
+ of_sama5d3_pmc_setup);
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
new file mode 100644
index 0000000..ba8d142
--- /dev/null
+++ b/drivers/clk/at91/pmc.h
@@ -0,0 +1,116 @@
+/*
+ * drivers/clk/at91/pmc.h
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PMC_H_
+#define __PMC_H_
+
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/spinlock.h>
+
+struct clk_range {
+ unsigned long min;
+ unsigned long max;
+};
+
+#define CLK_RANGE(MIN, MAX) {.min = MIN, .max = MAX,}
+
+struct at91_pmc_caps {
+ u32 available_irqs;
+};
+
+struct at91_pmc {
+ void __iomem *regbase;
+ int virq;
+ spinlock_t lock;
+ const struct at91_pmc_caps *caps;
+ struct irq_domain *irqdomain;
+};
+
+static inline void pmc_lock(struct at91_pmc *pmc)
+{
+ spin_lock(&pmc->lock);
+}
+
+static inline void pmc_unlock(struct at91_pmc *pmc)
+{
+ spin_unlock(&pmc->lock);
+}
+
+static inline u32 pmc_read(struct at91_pmc *pmc, int offset)
+{
+ return readl(pmc->regbase + offset);
+}
+
+static inline void pmc_write(struct at91_pmc *pmc, int offset, u32 value)
+{
+ writel(value, pmc->regbase + offset);
+}
+
+int of_at91_get_clk_range(struct device_node *np, const char *propname,
+ struct clk_range *range);
+
+extern void __init of_at91rm9200_clk_main_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+extern void __init of_at91rm9200_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9g45_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_sama5d3_clk_pll_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_plldiv_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+extern void __init of_at91rm9200_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_master_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+extern void __init of_at91rm9200_clk_sys_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+
+#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
+extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+#endif
+
+#if defined(CONFIG_HAVE_AT91_UTMI)
+extern void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+#endif
+
+#if defined(CONFIG_HAVE_AT91_USB_CLK)
+extern void __init of_at91rm9200_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9x5_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+extern void __init of_at91sam9n12_clk_usb_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+#endif
+
+#if defined(CONFIG_HAVE_AT91_SMD)
+extern void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
+ struct at91_pmc *pmc);
+#endif
+
+#endif /* __PMC_H_ */
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index ad5ff50..d967571 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -530,7 +530,8 @@
DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6),
DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6),
DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4),
- DIV(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8),
+ DIV_F(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
new file mode 100644
index 0000000..706adc6
--- /dev/null
+++ b/drivers/clk/shmobile/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
+obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
+
+# for emply built-in.o
+obj-n := dummy
diff --git a/drivers/clk/shmobile/clk-div6.c b/drivers/clk/shmobile/clk-div6.c
new file mode 100644
index 0000000..aac4756
--- /dev/null
+++ b/drivers/clk/shmobile/clk-div6.c
@@ -0,0 +1,185 @@
+/*
+ * r8a7790 Common Clock Framework support
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define CPG_DIV6_CKSTP BIT(8)
+#define CPG_DIV6_DIV(d) ((d) & 0x3f)
+#define CPG_DIV6_DIV_MASK 0x3f
+
+/**
+ * struct div6_clock - MSTP gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: IO-remapped register
+ * @div: divisor value (1-64)
+ */
+struct div6_clock {
+ struct clk_hw hw;
+ void __iomem *reg;
+ unsigned int div;
+};
+
+#define to_div6_clock(_hw) container_of(_hw, struct div6_clock, hw)
+
+static int cpg_div6_clock_enable(struct clk_hw *hw)
+{
+ struct div6_clock *clock = to_div6_clock(hw);
+
+ clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg);
+
+ return 0;
+}
+
+static void cpg_div6_clock_disable(struct clk_hw *hw)
+{
+ struct div6_clock *clock = to_div6_clock(hw);
+
+ /* DIV6 clocks require the divisor field to be non-zero when stopping
+ * the clock.
+ */
+ clk_writel(CPG_DIV6_CKSTP | CPG_DIV6_DIV(CPG_DIV6_DIV_MASK),
+ clock->reg);
+}
+
+static int cpg_div6_clock_is_enabled(struct clk_hw *hw)
+{
+ struct div6_clock *clock = to_div6_clock(hw);
+
+ return !(clk_readl(clock->reg) & CPG_DIV6_CKSTP);
+}
+
+static unsigned long cpg_div6_clock_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct div6_clock *clock = to_div6_clock(hw);
+ unsigned int div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
+
+ return parent_rate / div;
+}
+
+static unsigned int cpg_div6_clock_calc_div(unsigned long rate,
+ unsigned long parent_rate)
+{
+ unsigned int div;
+
+ div = DIV_ROUND_CLOSEST(parent_rate, rate);
+ return clamp_t(unsigned int, div, 1, 64);
+}
+
+static long cpg_div6_clock_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned int div = cpg_div6_clock_calc_div(rate, *parent_rate);
+
+ return *parent_rate / div;
+}
+
+static int cpg_div6_clock_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct div6_clock *clock = to_div6_clock(hw);
+ unsigned int div = cpg_div6_clock_calc_div(rate, parent_rate);
+
+ clock->div = div;
+
+ /* Only program the new divisor if the clock isn't stopped. */
+ if (!(clk_readl(clock->reg) & CPG_DIV6_CKSTP))
+ clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg);
+
+ return 0;
+}
+
+static const struct clk_ops cpg_div6_clock_ops = {
+ .enable = cpg_div6_clock_enable,
+ .disable = cpg_div6_clock_disable,
+ .is_enabled = cpg_div6_clock_is_enabled,
+ .recalc_rate = cpg_div6_clock_recalc_rate,
+ .round_rate = cpg_div6_clock_round_rate,
+ .set_rate = cpg_div6_clock_set_rate,
+};
+
+static void __init cpg_div6_clock_init(struct device_node *np)
+{
+ struct clk_init_data init;
+ struct div6_clock *clock;
+ const char *parent_name;
+ const char *name;
+ struct clk *clk;
+ int ret;
+
+ clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+ if (!clock) {
+ pr_err("%s: failed to allocate %s DIV6 clock\n",
+ __func__, np->name);
+ return;
+ }
+
+ /* Remap the clock register and read the divisor. Disabling the
+ * clock overwrites the divisor, so we need to cache its value for the
+ * enable operation.
+ */
+ clock->reg = of_iomap(np, 0);
+ if (clock->reg == NULL) {
+ pr_err("%s: failed to map %s DIV6 clock register\n",
+ __func__, np->name);
+ goto error;
+ }
+
+ clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
+
+ /* Parse the DT properties. */
+ ret = of_property_read_string(np, "clock-output-names", &name);
+ if (ret < 0) {
+ pr_err("%s: failed to get %s DIV6 clock output name\n",
+ __func__, np->name);
+ goto error;
+ }
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (parent_name == NULL) {
+ pr_err("%s: failed to get %s DIV6 clock parent name\n",
+ __func__, np->name);
+ goto error;
+ }
+
+ /* Register the clock. */
+ init.name = name;
+ init.ops = &cpg_div6_clock_ops;
+ init.flags = CLK_IS_BASIC;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clock->hw.init = &init;
+
+ clk = clk_register(NULL, &clock->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register %s DIV6 clock (%ld)\n",
+ __func__, np->name, PTR_ERR(clk));
+ goto error;
+ }
+
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+
+ return;
+
+error:
+ if (clock->reg)
+ iounmap(clock->reg);
+ kfree(clock);
+}
+CLK_OF_DECLARE(cpg_div6_clk, "renesas,cpg-div6-clock", cpg_div6_clock_init);
diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c
new file mode 100644
index 0000000..e576b60
--- /dev/null
+++ b/drivers/clk/shmobile/clk-mstp.c
@@ -0,0 +1,229 @@
+/*
+ * R-Car MSTP clocks
+ *
+ * Copyright (C) 2013 Ideas On Board SPRL
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+/*
+ * MSTP clocks. We can't use standard gate clocks as we need to poll on the
+ * status register when enabling the clock.
+ */
+
+#define MSTP_MAX_CLOCKS 32
+
+/**
+ * struct mstp_clock_group - MSTP gating clocks group
+ *
+ * @data: clocks in this group
+ * @smstpcr: module stop control register
+ * @mstpsr: module stop status register (optional)
+ * @lock: protects writes to SMSTPCR
+ */
+struct mstp_clock_group {
+ struct clk_onecell_data data;
+ void __iomem *smstpcr;
+ void __iomem *mstpsr;
+ spinlock_t lock;
+};
+
+/**
+ * struct mstp_clock - MSTP gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @bit_index: control bit index
+ * @group: MSTP clocks group
+ */
+struct mstp_clock {
+ struct clk_hw hw;
+ u32 bit_index;
+ struct mstp_clock_group *group;
+};
+
+#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
+
+static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
+{
+ struct mstp_clock *clock = to_mstp_clock(hw);
+ struct mstp_clock_group *group = clock->group;
+ u32 bitmask = BIT(clock->bit_index);
+ unsigned long flags;
+ unsigned int i;
+ u32 value;
+
+ spin_lock_irqsave(&group->lock, flags);
+
+ value = clk_readl(group->smstpcr);
+ if (enable)
+ value &= ~bitmask;
+ else
+ value |= bitmask;
+ clk_writel(value, group->smstpcr);
+
+ spin_unlock_irqrestore(&group->lock, flags);
+
+ if (!enable || !group->mstpsr)
+ return 0;
+
+ for (i = 1000; i > 0; --i) {
+ if (!(clk_readl(group->mstpsr) & bitmask))
+ break;
+ cpu_relax();
+ }
+
+ if (!i) {
+ pr_err("%s: failed to enable %p[%d]\n", __func__,
+ group->smstpcr, clock->bit_index);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int cpg_mstp_clock_enable(struct clk_hw *hw)
+{
+ return cpg_mstp_clock_endisable(hw, true);
+}
+
+static void cpg_mstp_clock_disable(struct clk_hw *hw)
+{
+ cpg_mstp_clock_endisable(hw, false);
+}
+
+static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
+{
+ struct mstp_clock *clock = to_mstp_clock(hw);
+ struct mstp_clock_group *group = clock->group;
+ u32 value;
+
+ if (group->mstpsr)
+ value = clk_readl(group->mstpsr);
+ else
+ value = clk_readl(group->smstpcr);
+
+ return !!(value & BIT(clock->bit_index));
+}
+
+static const struct clk_ops cpg_mstp_clock_ops = {
+ .enable = cpg_mstp_clock_enable,
+ .disable = cpg_mstp_clock_disable,
+ .is_enabled = cpg_mstp_clock_is_enabled,
+};
+
+static struct clk * __init
+cpg_mstp_clock_register(const char *name, const char *parent_name,
+ unsigned int index, struct mstp_clock_group *group)
+{
+ struct clk_init_data init;
+ struct mstp_clock *clock;
+ struct clk *clk;
+
+ clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+ if (!clock) {
+ pr_err("%s: failed to allocate MSTP clock.\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &cpg_mstp_clock_ops;
+ init.flags = CLK_IS_BASIC;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clock->bit_index = index;
+ clock->group = group;
+ clock->hw.init = &init;
+
+ clk = clk_register(NULL, &clock->hw);
+
+ if (IS_ERR(clk))
+ kfree(clock);
+
+ return clk;
+}
+
+static void __init cpg_mstp_clocks_init(struct device_node *np)
+{
+ struct mstp_clock_group *group;
+ struct clk **clks;
+ unsigned int i;
+
+ group = kzalloc(sizeof(*group), GFP_KERNEL);
+ clks = kzalloc(MSTP_MAX_CLOCKS * sizeof(*clks), GFP_KERNEL);
+ if (group == NULL || clks == NULL) {
+ kfree(group);
+ kfree(clks);
+ pr_err("%s: failed to allocate group\n", __func__);
+ return;
+ }
+
+ spin_lock_init(&group->lock);
+ group->data.clks = clks;
+
+ group->smstpcr = of_iomap(np, 0);
+ group->mstpsr = of_iomap(np, 1);
+
+ if (group->smstpcr == NULL) {
+ pr_err("%s: failed to remap SMSTPCR\n", __func__);
+ kfree(group);
+ kfree(clks);
+ return;
+ }
+
+ for (i = 0; i < MSTP_MAX_CLOCKS; ++i) {
+ const char *parent_name;
+ const char *name;
+ u32 clkidx;
+ int ret;
+
+ /* Skip clocks with no name. */
+ ret = of_property_read_string_index(np, "clock-output-names",
+ i, &name);
+ if (ret < 0 || strlen(name) == 0)
+ continue;
+
+ parent_name = of_clk_get_parent_name(np, i);
+ ret = of_property_read_u32_index(np, "renesas,clock-indices", i,
+ &clkidx);
+ if (parent_name == NULL || ret < 0)
+ break;
+
+ if (clkidx >= MSTP_MAX_CLOCKS) {
+ pr_err("%s: invalid clock %s %s index %u)\n",
+ __func__, np->name, name, clkidx);
+ continue;
+ }
+
+ clks[clkidx] = cpg_mstp_clock_register(name, parent_name, i,
+ group);
+ if (!IS_ERR(clks[clkidx])) {
+ group->data.clk_num = max(group->data.clk_num, clkidx);
+ /*
+ * Register a clkdev to let board code retrieve the
+ * clock by name and register aliases for non-DT
+ * devices.
+ *
+ * FIXME: Remove this when all devices that require a
+ * clock will be instantiated from DT.
+ */
+ clk_register_clkdev(clks[clkidx], name, NULL);
+ } else {
+ pr_err("%s: failed to register %s %s clock (%ld)\n",
+ __func__, np->name, name, PTR_ERR(clks[clkidx]));
+ }
+ }
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &group->data);
+}
+CLK_OF_DECLARE(cpg_mstp_clks, "renesas,cpg-mstp-clocks", cpg_mstp_clocks_init);
diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c
new file mode 100644
index 0000000..a59ec21
--- /dev/null
+++ b/drivers/clk/shmobile/clk-rcar-gen2.c
@@ -0,0 +1,298 @@
+/*
+ * rcar_gen2 Core CPG Clocks
+ *
+ * Copyright (C) 2013 Ideas On Board SPRL
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+struct rcar_gen2_cpg {
+ struct clk_onecell_data data;
+ spinlock_t lock;
+ void __iomem *reg;
+};
+
+#define CPG_SDCKCR 0x00000074
+#define CPG_PLL0CR 0x000000d8
+#define CPG_FRQCRC 0x000000e0
+#define CPG_FRQCRC_ZFC_MASK (0x1f << 8)
+#define CPG_FRQCRC_ZFC_SHIFT 8
+
+/* -----------------------------------------------------------------------------
+ * Z Clock
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable. clk->rate = parent->rate * mult / 32
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+struct cpg_z_clk {
+ struct clk_hw hw;
+ void __iomem *reg;
+};
+
+#define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw)
+
+static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct cpg_z_clk *zclk = to_z_clk(hw);
+ unsigned int mult;
+ unsigned int val;
+
+ val = (clk_readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK)
+ >> CPG_FRQCRC_ZFC_SHIFT;
+ mult = 32 - val;
+
+ return div_u64((u64)parent_rate * mult, 32);
+}
+
+static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned long prate = *parent_rate;
+ unsigned int mult;
+
+ if (!prate)
+ prate = 1;
+
+ mult = div_u64((u64)rate * 32, prate);
+ mult = clamp(mult, 1U, 32U);
+
+ return *parent_rate / 32 * mult;
+}
+
+static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct cpg_z_clk *zclk = to_z_clk(hw);
+ unsigned int mult;
+ u32 val;
+
+ mult = div_u64((u64)rate * 32, parent_rate);
+ mult = clamp(mult, 1U, 32U);
+
+ val = clk_readl(zclk->reg);
+ val &= ~CPG_FRQCRC_ZFC_MASK;
+ val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT;
+ clk_writel(val, zclk->reg);
+
+ return 0;
+}
+
+static const struct clk_ops cpg_z_clk_ops = {
+ .recalc_rate = cpg_z_clk_recalc_rate,
+ .round_rate = cpg_z_clk_round_rate,
+ .set_rate = cpg_z_clk_set_rate,
+};
+
+static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg)
+{
+ static const char *parent_name = "pll0";
+ struct clk_init_data init;
+ struct cpg_z_clk *zclk;
+ struct clk *clk;
+
+ zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
+ if (!zclk)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = "z";
+ init.ops = &cpg_z_clk_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ zclk->reg = cpg->reg + CPG_FRQCRC;
+ zclk->hw.init = &init;
+
+ clk = clk_register(NULL, &zclk->hw);
+ if (IS_ERR(clk))
+ kfree(zclk);
+
+ return clk;
+}
+
+/* -----------------------------------------------------------------------------
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *1
+ *---------------------------------------------------
+ * 0 0 0 15 x 1 x172/2 x208/2 x106
+ * 0 0 1 15 x 1 x172/2 x208/2 x88
+ * 0 1 0 20 x 1 x130/2 x156/2 x80
+ * 0 1 1 20 x 1 x130/2 x156/2 x66
+ * 1 0 0 26 / 2 x200/2 x240/2 x122
+ * 1 0 1 26 / 2 x200/2 x240/2 x102
+ * 1 1 0 30 / 2 x172/2 x208/2 x106
+ * 1 1 1 30 / 2 x172/2 x208/2 x88
+ *
+ * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
+ (((md) & BIT(13)) >> 12) | \
+ (((md) & BIT(19)) >> 19))
+struct cpg_pll_config {
+ unsigned int extal_div;
+ unsigned int pll1_mult;
+ unsigned int pll3_mult;
+};
+
+static const struct cpg_pll_config cpg_pll_configs[8] __initconst = {
+ { 1, 208, 106 }, { 1, 208, 88 }, { 1, 156, 80 }, { 1, 156, 66 },
+ { 2, 240, 122 }, { 2, 240, 102 }, { 2, 208, 106 }, { 2, 208, 88 },
+};
+
+/* SDHI divisors */
+static const struct clk_div_table cpg_sdh_div_table[] = {
+ { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 },
+ { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 },
+ { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 },
+};
+
+static const struct clk_div_table cpg_sd01_div_table[] = {
+ { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
+ { 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static u32 cpg_mode __initdata;
+
+static struct clk * __init
+rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
+ const struct cpg_pll_config *config,
+ const char *name)
+{
+ const struct clk_div_table *table = NULL;
+ const char *parent_name = "main";
+ unsigned int shift;
+ unsigned int mult = 1;
+ unsigned int div = 1;
+
+ if (!strcmp(name, "main")) {
+ parent_name = of_clk_get_parent_name(np, 0);
+ div = config->extal_div;
+ } else if (!strcmp(name, "pll0")) {
+ /* PLL0 is a configurable multiplier clock. Register it as a
+ * fixed factor clock for now as there's no generic multiplier
+ * clock implementation and we currently have no need to change
+ * the multiplier value.
+ */
+ u32 value = clk_readl(cpg->reg + CPG_PLL0CR);
+ mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
+ } else if (!strcmp(name, "pll1")) {
+ mult = config->pll1_mult / 2;
+ } else if (!strcmp(name, "pll3")) {
+ mult = config->pll3_mult;
+ } else if (!strcmp(name, "lb")) {
+ div = cpg_mode & BIT(18) ? 36 : 24;
+ } else if (!strcmp(name, "qspi")) {
+ div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2)
+ ? 16 : 20;
+ } else if (!strcmp(name, "sdh")) {
+ table = cpg_sdh_div_table;
+ shift = 8;
+ } else if (!strcmp(name, "sd0")) {
+ table = cpg_sd01_div_table;
+ shift = 4;
+ } else if (!strcmp(name, "sd1")) {
+ table = cpg_sd01_div_table;
+ shift = 0;
+ } else if (!strcmp(name, "z")) {
+ return cpg_z_clk_register(cpg);
+ } else {
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (!table)
+ return clk_register_fixed_factor(NULL, name, parent_name, 0,
+ mult, div);
+ else
+ return clk_register_divider_table(NULL, name, parent_name, 0,
+ cpg->reg + CPG_SDCKCR, shift,
+ 4, 0, table, &cpg->lock);
+}
+
+static void __init rcar_gen2_cpg_clocks_init(struct device_node *np)
+{
+ const struct cpg_pll_config *config;
+ struct rcar_gen2_cpg *cpg;
+ struct clk **clks;
+ unsigned int i;
+ int num_clks;
+
+ num_clks = of_property_count_strings(np, "clock-output-names");
+ if (num_clks < 0) {
+ pr_err("%s: failed to count clocks\n", __func__);
+ return;
+ }
+
+ cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+ clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL);
+ if (cpg == NULL || clks == NULL) {
+ /* We're leaking memory on purpose, there's no point in cleaning
+ * up as the system won't boot anyway.
+ */
+ pr_err("%s: failed to allocate cpg\n", __func__);
+ return;
+ }
+
+ spin_lock_init(&cpg->lock);
+
+ cpg->data.clks = clks;
+ cpg->data.clk_num = num_clks;
+
+ cpg->reg = of_iomap(np, 0);
+ if (WARN_ON(cpg->reg == NULL))
+ return;
+
+ config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+ for (i = 0; i < num_clks; ++i) {
+ const char *name;
+ struct clk *clk;
+
+ of_property_read_string_index(np, "clock-output-names", i,
+ &name);
+
+ clk = rcar_gen2_cpg_register_clock(np, cpg, config, name);
+ if (IS_ERR(clk))
+ pr_err("%s: failed to register %s %s clock (%ld)\n",
+ __func__, np->name, name, PTR_ERR(clk));
+ else
+ cpg->data.clks[i] = clk;
+ }
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+CLK_OF_DECLARE(rcar_gen2_cpg_clks, "renesas,rcar-gen2-cpg-clocks",
+ rcar_gen2_cpg_clocks_init);
+
+void __init rcar_gen2_clocks_init(u32 mode)
+{
+ cpg_mode = mode;
+
+ of_clk_init(NULL);
+}
diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index f49fac2..f7dfb72 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -6,7 +6,12 @@
obj-y += clk-pll.o
obj-y += clk-pll-out.o
obj-y += clk-super.o
-
+obj-y += clk-tegra-audio.o
+obj-y += clk-tegra-periph.o
+obj-y += clk-tegra-pmc.o
+obj-y += clk-tegra-fixed.o
+obj-y += clk-tegra-super-gen4.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124.o
diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
new file mode 100644
index 0000000..cf0c323
--- /dev/null
+++ b/drivers/clk/tegra/clk-id.h
@@ -0,0 +1,235 @@
+/*
+ * This header provides IDs for clocks common between several Tegra SoCs
+ */
+#ifndef _TEGRA_CLK_ID_H
+#define _TEGRA_CLK_ID_H
+
+enum clk_id {
+ tegra_clk_actmon,
+ tegra_clk_adx,
+ tegra_clk_adx1,
+ tegra_clk_afi,
+ tegra_clk_amx,
+ tegra_clk_amx1,
+ tegra_clk_apbdma,
+ tegra_clk_apbif,
+ tegra_clk_audio0,
+ tegra_clk_audio0_2x,
+ tegra_clk_audio0_mux,
+ tegra_clk_audio1,
+ tegra_clk_audio1_2x,
+ tegra_clk_audio1_mux,
+ tegra_clk_audio2,
+ tegra_clk_audio2_2x,
+ tegra_clk_audio2_mux,
+ tegra_clk_audio3,
+ tegra_clk_audio3_2x,
+ tegra_clk_audio3_mux,
+ tegra_clk_audio4,
+ tegra_clk_audio4_2x,
+ tegra_clk_audio4_mux,
+ tegra_clk_blink,
+ tegra_clk_bsea,
+ tegra_clk_bsev,
+ tegra_clk_cclk_g,
+ tegra_clk_cclk_lp,
+ tegra_clk_cilab,
+ tegra_clk_cilcd,
+ tegra_clk_cile,
+ tegra_clk_clk_32k,
+ tegra_clk_clk72Mhz,
+ tegra_clk_clk_m,
+ tegra_clk_clk_m_div2,
+ tegra_clk_clk_m_div4,
+ tegra_clk_clk_out_1,
+ tegra_clk_clk_out_1_mux,
+ tegra_clk_clk_out_2,
+ tegra_clk_clk_out_2_mux,
+ tegra_clk_clk_out_3,
+ tegra_clk_clk_out_3_mux,
+ tegra_clk_cml0,
+ tegra_clk_cml1,
+ tegra_clk_csi,
+ tegra_clk_csite,
+ tegra_clk_csus,
+ tegra_clk_cve,
+ tegra_clk_dam0,
+ tegra_clk_dam1,
+ tegra_clk_dam2,
+ tegra_clk_d_audio,
+ tegra_clk_dds,
+ tegra_clk_dfll_ref,
+ tegra_clk_dfll_soc,
+ tegra_clk_disp1,
+ tegra_clk_disp2,
+ tegra_clk_dp2,
+ tegra_clk_dpaux,
+ tegra_clk_dsia,
+ tegra_clk_dsialp,
+ tegra_clk_dsia_mux,
+ tegra_clk_dsib,
+ tegra_clk_dsiblp,
+ tegra_clk_dsib_mux,
+ tegra_clk_dtv,
+ tegra_clk_emc,
+ tegra_clk_entropy,
+ tegra_clk_epp,
+ tegra_clk_epp_8,
+ tegra_clk_extern1,
+ tegra_clk_extern2,
+ tegra_clk_extern3,
+ tegra_clk_fuse,
+ tegra_clk_fuse_burn,
+ tegra_clk_gpu,
+ tegra_clk_gr2d,
+ tegra_clk_gr2d_8,
+ tegra_clk_gr3d,
+ tegra_clk_gr3d_8,
+ tegra_clk_hclk,
+ tegra_clk_hda,
+ tegra_clk_hda2codec_2x,
+ tegra_clk_hda2hdmi,
+ tegra_clk_hdmi,
+ tegra_clk_hdmi_audio,
+ tegra_clk_host1x,
+ tegra_clk_host1x_8,
+ tegra_clk_i2c1,
+ tegra_clk_i2c2,
+ tegra_clk_i2c3,
+ tegra_clk_i2c4,
+ tegra_clk_i2c5,
+ tegra_clk_i2c6,
+ tegra_clk_i2cslow,
+ tegra_clk_i2s0,
+ tegra_clk_i2s0_sync,
+ tegra_clk_i2s1,
+ tegra_clk_i2s1_sync,
+ tegra_clk_i2s2,
+ tegra_clk_i2s2_sync,
+ tegra_clk_i2s3,
+ tegra_clk_i2s3_sync,
+ tegra_clk_i2s4,
+ tegra_clk_i2s4_sync,
+ tegra_clk_isp,
+ tegra_clk_isp_8,
+ tegra_clk_ispb,
+ tegra_clk_kbc,
+ tegra_clk_kfuse,
+ tegra_clk_la,
+ tegra_clk_mipi,
+ tegra_clk_mipi_cal,
+ tegra_clk_mpe,
+ tegra_clk_mselect,
+ tegra_clk_msenc,
+ tegra_clk_ndflash,
+ tegra_clk_ndflash_8,
+ tegra_clk_ndspeed,
+ tegra_clk_ndspeed_8,
+ tegra_clk_nor,
+ tegra_clk_owr,
+ tegra_clk_pcie,
+ tegra_clk_pclk,
+ tegra_clk_pll_a,
+ tegra_clk_pll_a_out0,
+ tegra_clk_pll_c,
+ tegra_clk_pll_c2,
+ tegra_clk_pll_c3,
+ tegra_clk_pll_c4,
+ tegra_clk_pll_c_out1,
+ tegra_clk_pll_d,
+ tegra_clk_pll_d2,
+ tegra_clk_pll_d2_out0,
+ tegra_clk_pll_d_out0,
+ tegra_clk_pll_dp,
+ tegra_clk_pll_e_out0,
+ tegra_clk_pll_m,
+ tegra_clk_pll_m_out1,
+ tegra_clk_pll_p,
+ tegra_clk_pll_p_out1,
+ tegra_clk_pll_p_out2,
+ tegra_clk_pll_p_out2_int,
+ tegra_clk_pll_p_out3,
+ tegra_clk_pll_p_out4,
+ tegra_clk_pll_p_out5,
+ tegra_clk_pll_ref,
+ tegra_clk_pll_re_out,
+ tegra_clk_pll_re_vco,
+ tegra_clk_pll_u,
+ tegra_clk_pll_u_12m,
+ tegra_clk_pll_u_480m,
+ tegra_clk_pll_u_48m,
+ tegra_clk_pll_u_60m,
+ tegra_clk_pll_x,
+ tegra_clk_pll_x_out0,
+ tegra_clk_pwm,
+ tegra_clk_rtc,
+ tegra_clk_sata,
+ tegra_clk_sata_cold,
+ tegra_clk_sata_oob,
+ tegra_clk_sbc1,
+ tegra_clk_sbc1_8,
+ tegra_clk_sbc2,
+ tegra_clk_sbc2_8,
+ tegra_clk_sbc3,
+ tegra_clk_sbc3_8,
+ tegra_clk_sbc4,
+ tegra_clk_sbc4_8,
+ tegra_clk_sbc5,
+ tegra_clk_sbc5_8,
+ tegra_clk_sbc6,
+ tegra_clk_sbc6_8,
+ tegra_clk_sclk,
+ tegra_clk_sdmmc1,
+ tegra_clk_sdmmc2,
+ tegra_clk_sdmmc3,
+ tegra_clk_sdmmc4,
+ tegra_clk_se,
+ tegra_clk_soc_therm,
+ tegra_clk_sor0,
+ tegra_clk_sor0_lvds,
+ tegra_clk_spdif,
+ tegra_clk_spdif_2x,
+ tegra_clk_spdif_in,
+ tegra_clk_spdif_in_sync,
+ tegra_clk_spdif_mux,
+ tegra_clk_spdif_out,
+ tegra_clk_timer,
+ tegra_clk_trace,
+ tegra_clk_tsec,
+ tegra_clk_tsensor,
+ tegra_clk_tvdac,
+ tegra_clk_tvo,
+ tegra_clk_uarta,
+ tegra_clk_uartb,
+ tegra_clk_uartc,
+ tegra_clk_uartd,
+ tegra_clk_uarte,
+ tegra_clk_usb2,
+ tegra_clk_usb3,
+ tegra_clk_usbd,
+ tegra_clk_vcp,
+ tegra_clk_vde,
+ tegra_clk_vde_8,
+ tegra_clk_vfir,
+ tegra_clk_vi,
+ tegra_clk_vi_8,
+ tegra_clk_vi_9,
+ tegra_clk_vic03,
+ tegra_clk_vim2_clk,
+ tegra_clk_vimclk_sync,
+ tegra_clk_vi_sensor,
+ tegra_clk_vi_sensor2,
+ tegra_clk_vi_sensor_8,
+ tegra_clk_xusb_dev,
+ tegra_clk_xusb_dev_src,
+ tegra_clk_xusb_falcon_src,
+ tegra_clk_xusb_fs_src,
+ tegra_clk_xusb_host,
+ tegra_clk_xusb_host_src,
+ tegra_clk_xusb_hs_src,
+ tegra_clk_xusb_ss,
+ tegra_clk_xusb_ss_src,
+ tegra_clk_max,
+};
+
+#endif /* _TEGRA_CLK_ID_H */
diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
index bafee98..5070153 100644
--- a/drivers/clk/tegra/clk-periph-gate.c
+++ b/drivers/clk/tegra/clk-periph-gate.c
@@ -36,8 +36,6 @@
#define read_rst(gate) \
readl_relaxed(gate->clk_base + (gate->regs->rst_reg))
-#define write_rst_set(val, gate) \
- writel_relaxed(val, gate->clk_base + (gate->regs->rst_set_reg))
#define write_rst_clr(val, gate) \
writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg))
@@ -123,26 +121,6 @@
spin_unlock_irqrestore(&periph_ref_lock, flags);
}
-void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert)
-{
- if (gate->flags & TEGRA_PERIPH_NO_RESET)
- return;
-
- if (assert) {
- /*
- * If peripheral is in the APB bus then read the APB bus to
- * flush the write operation in apb bus. This will avoid the
- * peripheral access after disabling clock
- */
- if (gate->flags & TEGRA_PERIPH_ON_APB)
- tegra_read_chipid();
-
- write_rst_set(periph_clk_to_bit(gate), gate);
- } else {
- write_rst_clr(periph_clk_to_bit(gate), gate);
- }
-}
-
const struct clk_ops tegra_clk_periph_gate_ops = {
.is_enabled = clk_periph_is_enabled,
.enable = clk_periph_enable,
@@ -151,12 +129,16 @@
struct clk *tegra_clk_register_periph_gate(const char *name,
const char *parent_name, u8 gate_flags, void __iomem *clk_base,
- unsigned long flags, int clk_num,
- struct tegra_clk_periph_regs *pregs, int *enable_refcnt)
+ unsigned long flags, int clk_num, int *enable_refcnt)
{
struct tegra_clk_periph_gate *gate;
struct clk *clk;
struct clk_init_data init;
+ struct tegra_clk_periph_regs *pregs;
+
+ pregs = get_reg_bank(clk_num);
+ if (!pregs)
+ return ERR_PTR(-EINVAL);
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate) {
diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c
index b2309d3..c534043 100644
--- a/drivers/clk/tegra/clk-periph.c
+++ b/drivers/clk/tegra/clk-periph.c
@@ -111,46 +111,6 @@
gate_ops->disable(gate_hw);
}
-void tegra_periph_reset_deassert(struct clk *c)
-{
- struct clk_hw *hw = __clk_get_hw(c);
- struct tegra_clk_periph *periph = to_clk_periph(hw);
- struct tegra_clk_periph_gate *gate;
-
- if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) {
- gate = to_clk_periph_gate(hw);
- if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) {
- WARN_ON(1);
- return;
- }
- } else {
- gate = &periph->gate;
- }
-
- tegra_periph_reset(gate, 0);
-}
-EXPORT_SYMBOL(tegra_periph_reset_deassert);
-
-void tegra_periph_reset_assert(struct clk *c)
-{
- struct clk_hw *hw = __clk_get_hw(c);
- struct tegra_clk_periph *periph = to_clk_periph(hw);
- struct tegra_clk_periph_gate *gate;
-
- if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) {
- gate = to_clk_periph_gate(hw);
- if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) {
- WARN_ON(1);
- return;
- }
- } else {
- gate = &periph->gate;
- }
-
- tegra_periph_reset(gate, 1);
-}
-EXPORT_SYMBOL(tegra_periph_reset_assert);
-
const struct clk_ops tegra_clk_periph_ops = {
.get_parent = clk_periph_get_parent,
.set_parent = clk_periph_set_parent,
@@ -170,27 +130,50 @@
.disable = clk_periph_disable,
};
+const struct clk_ops tegra_clk_periph_no_gate_ops = {
+ .get_parent = clk_periph_get_parent,
+ .set_parent = clk_periph_set_parent,
+ .recalc_rate = clk_periph_recalc_rate,
+ .round_rate = clk_periph_round_rate,
+ .set_rate = clk_periph_set_rate,
+};
+
static struct clk *_tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph,
- void __iomem *clk_base, u32 offset, bool div,
+ void __iomem *clk_base, u32 offset,
unsigned long flags)
{
struct clk *clk;
struct clk_init_data init;
+ struct tegra_clk_periph_regs *bank;
+ bool div = !(periph->gate.flags & TEGRA_PERIPH_NO_DIV);
+
+ if (periph->gate.flags & TEGRA_PERIPH_NO_DIV) {
+ flags |= CLK_SET_RATE_PARENT;
+ init.ops = &tegra_clk_periph_nodiv_ops;
+ } else if (periph->gate.flags & TEGRA_PERIPH_NO_GATE)
+ init.ops = &tegra_clk_periph_no_gate_ops;
+ else
+ init.ops = &tegra_clk_periph_ops;
init.name = name;
- init.ops = div ? &tegra_clk_periph_ops : &tegra_clk_periph_nodiv_ops;
init.flags = flags;
init.parent_names = parent_names;
init.num_parents = num_parents;
+ bank = get_reg_bank(periph->gate.clk_num);
+ if (!bank)
+ return ERR_PTR(-EINVAL);
+
/* Data in .init is copied by clk_register(), so stack variable OK */
periph->hw.init = &init;
periph->magic = TEGRA_CLK_PERIPH_MAGIC;
periph->mux.reg = clk_base + offset;
periph->divider.reg = div ? (clk_base + offset) : NULL;
periph->gate.clk_base = clk_base;
+ periph->gate.regs = bank;
+ periph->gate.enable_refcnt = periph_clk_enb_refcnt;
clk = clk_register(NULL, &periph->hw);
if (IS_ERR(clk))
@@ -209,7 +192,7 @@
u32 offset, unsigned long flags)
{
return _tegra_clk_register_periph(name, parent_names, num_parents,
- periph, clk_base, offset, true, flags);
+ periph, clk_base, offset, flags);
}
struct clk *tegra_clk_register_periph_nodiv(const char *name,
@@ -217,6 +200,7 @@
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset)
{
+ periph->gate.flags |= TEGRA_PERIPH_NO_DIV;
return _tegra_clk_register_periph(name, parent_names, num_parents,
- periph, clk_base, offset, false, CLK_SET_RATE_PARENT);
+ periph, clk_base, offset, CLK_SET_RATE_PARENT);
}
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 197074a..2dd4322 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -77,7 +77,23 @@
#define PLLE_MISC_SETUP_VALUE (7 << PLLE_MISC_SETUP_BASE_SHIFT)
#define PLLE_SS_CTRL 0x68
-#define PLLE_SS_DISABLE (7 << 10)
+#define PLLE_SS_CNTL_BYPASS_SS BIT(10)
+#define PLLE_SS_CNTL_INTERP_RESET BIT(11)
+#define PLLE_SS_CNTL_SSC_BYP BIT(12)
+#define PLLE_SS_CNTL_CENTER BIT(14)
+#define PLLE_SS_CNTL_INVERT BIT(15)
+#define PLLE_SS_DISABLE (PLLE_SS_CNTL_BYPASS_SS | PLLE_SS_CNTL_INTERP_RESET |\
+ PLLE_SS_CNTL_SSC_BYP)
+#define PLLE_SS_MAX_MASK 0x1ff
+#define PLLE_SS_MAX_VAL 0x25
+#define PLLE_SS_INC_MASK (0xff << 16)
+#define PLLE_SS_INC_VAL (0x1 << 16)
+#define PLLE_SS_INCINTRV_MASK (0x3f << 24)
+#define PLLE_SS_INCINTRV_VAL (0x20 << 24)
+#define PLLE_SS_COEFFICIENTS_MASK \
+ (PLLE_SS_MAX_MASK | PLLE_SS_INC_MASK | PLLE_SS_INCINTRV_MASK)
+#define PLLE_SS_COEFFICIENTS_VAL \
+ (PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL)
#define PLLE_AUX_PLLP_SEL BIT(2)
#define PLLE_AUX_ENABLE_SWCTL BIT(4)
@@ -121,6 +137,36 @@
#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE BIT(5)
#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL BIT(4)
+#define PLLSS_MISC_KCP 0
+#define PLLSS_MISC_KVCO 0
+#define PLLSS_MISC_SETUP 0
+#define PLLSS_EN_SDM 0
+#define PLLSS_EN_SSC 0
+#define PLLSS_EN_DITHER2 0
+#define PLLSS_EN_DITHER 1
+#define PLLSS_SDM_RESET 0
+#define PLLSS_CLAMP 0
+#define PLLSS_SDM_SSC_MAX 0
+#define PLLSS_SDM_SSC_MIN 0
+#define PLLSS_SDM_SSC_STEP 0
+#define PLLSS_SDM_DIN 0
+#define PLLSS_MISC_DEFAULT ((PLLSS_MISC_KCP << 25) | \
+ (PLLSS_MISC_KVCO << 24) | \
+ PLLSS_MISC_SETUP)
+#define PLLSS_CFG_DEFAULT ((PLLSS_EN_SDM << 31) | \
+ (PLLSS_EN_SSC << 30) | \
+ (PLLSS_EN_DITHER2 << 29) | \
+ (PLLSS_EN_DITHER << 28) | \
+ (PLLSS_SDM_RESET) << 27 | \
+ (PLLSS_CLAMP << 22))
+#define PLLSS_CTRL1_DEFAULT \
+ ((PLLSS_SDM_SSC_MAX << 16) | PLLSS_SDM_SSC_MIN)
+#define PLLSS_CTRL2_DEFAULT \
+ ((PLLSS_SDM_SSC_STEP << 16) | PLLSS_SDM_DIN)
+#define PLLSS_LOCK_OVERRIDE BIT(24)
+#define PLLSS_REF_SRC_SEL_SHIFT 25
+#define PLLSS_REF_SRC_SEL_MASK (3 << PLLSS_REF_SRC_SEL_SHIFT)
+
#define pll_readl(offset, p) readl_relaxed(p->clk_base + offset)
#define pll_readl_base(p) pll_readl(p->params->base_reg, p)
#define pll_readl_misc(p) pll_readl(p->params->misc_reg, p)
@@ -134,7 +180,7 @@
#define mask(w) ((1 << (w)) - 1)
#define divm_mask(p) mask(p->params->div_nmp->divm_width)
#define divn_mask(p) mask(p->params->div_nmp->divn_width)
-#define divp_mask(p) (p->flags & TEGRA_PLLU ? PLLU_POST_DIVP_MASK : \
+#define divp_mask(p) (p->params->flags & TEGRA_PLLU ? PLLU_POST_DIVP_MASK :\
mask(p->params->div_nmp->divp_width))
#define divm_max(p) (divm_mask(p))
@@ -154,10 +200,10 @@
{
u32 val;
- if (!(pll->flags & TEGRA_PLL_USE_LOCK))
+ if (!(pll->params->flags & TEGRA_PLL_USE_LOCK))
return;
- if (!(pll->flags & TEGRA_PLL_HAS_LOCK_ENABLE))
+ if (!(pll->params->flags & TEGRA_PLL_HAS_LOCK_ENABLE))
return;
val = pll_readl_misc(pll);
@@ -171,13 +217,13 @@
u32 val, lock_mask;
void __iomem *lock_addr;
- if (!(pll->flags & TEGRA_PLL_USE_LOCK)) {
+ if (!(pll->params->flags & TEGRA_PLL_USE_LOCK)) {
udelay(pll->params->lock_delay);
return 0;
}
lock_addr = pll->clk_base;
- if (pll->flags & TEGRA_PLL_LOCK_MISC)
+ if (pll->params->flags & TEGRA_PLL_LOCK_MISC)
lock_addr += pll->params->misc_reg;
else
lock_addr += pll->params->base_reg;
@@ -204,7 +250,7 @@
struct tegra_clk_pll *pll = to_clk_pll(hw);
u32 val;
- if (pll->flags & TEGRA_PLLM) {
+ if (pll->params->flags & TEGRA_PLLM) {
val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)
return val & PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE ? 1 : 0;
@@ -223,12 +269,12 @@
clk_pll_enable_lock(pll);
val = pll_readl_base(pll);
- if (pll->flags & TEGRA_PLL_BYPASS)
+ if (pll->params->flags & TEGRA_PLL_BYPASS)
val &= ~PLL_BASE_BYPASS;
val |= PLL_BASE_ENABLE;
pll_writel_base(val, pll);
- if (pll->flags & TEGRA_PLLM) {
+ if (pll->params->flags & TEGRA_PLLM) {
val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE);
@@ -241,12 +287,12 @@
u32 val;
val = pll_readl_base(pll);
- if (pll->flags & TEGRA_PLL_BYPASS)
+ if (pll->params->flags & TEGRA_PLL_BYPASS)
val &= ~PLL_BASE_BYPASS;
val &= ~PLL_BASE_ENABLE;
pll_writel_base(val, pll);
- if (pll->flags & TEGRA_PLLM) {
+ if (pll->params->flags & TEGRA_PLLM) {
val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
writel_relaxed(val, pll->pmc + PMC_PLLP_WB0_OVERRIDE);
@@ -326,7 +372,7 @@
struct tegra_clk_pll *pll = to_clk_pll(hw);
struct tegra_clk_pll_freq_table *sel;
- for (sel = pll->freq_table; sel->input_rate != 0; sel++)
+ for (sel = pll->params->freq_table; sel->input_rate != 0; sel++)
if (sel->input_rate == parent_rate &&
sel->output_rate == rate)
break;
@@ -389,12 +435,11 @@
if (cfg->m > divm_max(pll) || cfg->n > divn_max(pll) ||
(1 << p_div) > divp_max(pll)
|| cfg->output_rate > pll->params->vco_max) {
- pr_err("%s: Failed to set %s rate %lu\n",
- __func__, __clk_get_name(hw->clk), rate);
- WARN_ON(1);
return -EINVAL;
}
+ cfg->output_rate >>= p_div;
+
if (pll->params->pdiv_tohw) {
ret = _p_div_to_hw(hw, 1 << p_div);
if (ret < 0)
@@ -414,7 +459,7 @@
struct tegra_clk_pll_params *params = pll->params;
struct div_nmp *div_nmp = params->div_nmp;
- if ((pll->flags & TEGRA_PLLM) &&
+ if ((params->flags & TEGRA_PLLM) &&
(pll_override_readl(PMC_PLLP_WB0_OVERRIDE, pll) &
PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)) {
val = pll_override_readl(params->pmc_divp_reg, pll);
@@ -450,7 +495,7 @@
struct tegra_clk_pll_params *params = pll->params;
struct div_nmp *div_nmp = params->div_nmp;
- if ((pll->flags & TEGRA_PLLM) &&
+ if ((params->flags & TEGRA_PLLM) &&
(pll_override_readl(PMC_PLLP_WB0_OVERRIDE, pll) &
PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)) {
val = pll_override_readl(params->pmc_divp_reg, pll);
@@ -479,11 +524,11 @@
val &= ~(PLL_MISC_CPCON_MASK << PLL_MISC_CPCON_SHIFT);
val |= cfg->cpcon << PLL_MISC_CPCON_SHIFT;
- if (pll->flags & TEGRA_PLL_SET_LFCON) {
+ if (pll->params->flags & TEGRA_PLL_SET_LFCON) {
val &= ~(PLL_MISC_LFCON_MASK << PLL_MISC_LFCON_SHIFT);
if (cfg->n >= PLLDU_LFCON_SET_DIVN)
val |= 1 << PLL_MISC_LFCON_SHIFT;
- } else if (pll->flags & TEGRA_PLL_SET_DCCON) {
+ } else if (pll->params->flags & TEGRA_PLL_SET_DCCON) {
val &= ~(1 << PLL_MISC_DCCON_SHIFT);
if (rate >= (pll->params->vco_max >> 1))
val |= 1 << PLL_MISC_DCCON_SHIFT;
@@ -505,7 +550,7 @@
_update_pll_mnp(pll, cfg);
- if (pll->flags & TEGRA_PLL_HAS_CPCON)
+ if (pll->params->flags & TEGRA_PLL_HAS_CPCON)
_update_pll_cpcon(pll, cfg, rate);
if (state) {
@@ -524,11 +569,11 @@
unsigned long flags = 0;
int ret = 0;
- if (pll->flags & TEGRA_PLL_FIXED) {
- if (rate != pll->fixed_rate) {
+ if (pll->params->flags & TEGRA_PLL_FIXED) {
+ if (rate != pll->params->fixed_rate) {
pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
__func__, __clk_get_name(hw->clk),
- pll->fixed_rate, rate);
+ pll->params->fixed_rate, rate);
return -EINVAL;
}
return 0;
@@ -536,6 +581,8 @@
if (_get_table_rate(hw, &cfg, rate, parent_rate) &&
_calc_rate(hw, &cfg, rate, parent_rate)) {
+ pr_err("%s: Failed to set %s rate %lu\n", __func__,
+ __clk_get_name(hw->clk), rate);
WARN_ON(1);
return -EINVAL;
}
@@ -559,18 +606,16 @@
struct tegra_clk_pll *pll = to_clk_pll(hw);
struct tegra_clk_pll_freq_table cfg;
- if (pll->flags & TEGRA_PLL_FIXED)
- return pll->fixed_rate;
+ if (pll->params->flags & TEGRA_PLL_FIXED)
+ return pll->params->fixed_rate;
/* PLLM is used for memory; we do not change rate */
- if (pll->flags & TEGRA_PLLM)
+ if (pll->params->flags & TEGRA_PLLM)
return __clk_get_rate(hw->clk);
if (_get_table_rate(hw, &cfg, rate, *prate) &&
- _calc_rate(hw, &cfg, rate, *prate)) {
- WARN_ON(1);
+ _calc_rate(hw, &cfg, rate, *prate))
return -EINVAL;
- }
return cfg.output_rate;
}
@@ -586,17 +631,19 @@
val = pll_readl_base(pll);
- if ((pll->flags & TEGRA_PLL_BYPASS) && (val & PLL_BASE_BYPASS))
+ if ((pll->params->flags & TEGRA_PLL_BYPASS) && (val & PLL_BASE_BYPASS))
return parent_rate;
- if ((pll->flags & TEGRA_PLL_FIXED) && !(val & PLL_BASE_OVERRIDE)) {
+ if ((pll->params->flags & TEGRA_PLL_FIXED) &&
+ !(val & PLL_BASE_OVERRIDE)) {
struct tegra_clk_pll_freq_table sel;
- if (_get_table_rate(hw, &sel, pll->fixed_rate, parent_rate)) {
+ if (_get_table_rate(hw, &sel, pll->params->fixed_rate,
+ parent_rate)) {
pr_err("Clock %s has unknown fixed frequency\n",
__clk_get_name(hw->clk));
BUG();
}
- return pll->fixed_rate;
+ return pll->params->fixed_rate;
}
_get_pll_mnp(pll, &cfg);
@@ -664,7 +711,7 @@
u32 val;
int err;
- if (_get_table_rate(hw, &sel, pll->fixed_rate, input_rate))
+ if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate))
return -EINVAL;
clk_pll_disable(hw);
@@ -680,7 +727,7 @@
return err;
}
- if (pll->flags & TEGRA_PLLE_CONFIGURE) {
+ if (pll->params->flags & TEGRA_PLLE_CONFIGURE) {
/* configure dividers */
val = pll_readl_base(pll);
val &= ~(divm_mask(pll) | divn_mask(pll) | divp_mask(pll));
@@ -744,7 +791,7 @@
.enable = clk_plle_enable,
};
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
+#if defined(CONFIG_ARCH_TEGRA_114_SOC) || defined(CONFIG_ARCH_TEGRA_124_SOC)
static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,
unsigned long parent_rate)
@@ -755,6 +802,48 @@
return 1;
}
+static unsigned long _clip_vco_min(unsigned long vco_min,
+ unsigned long parent_rate)
+{
+ return DIV_ROUND_UP(vco_min, parent_rate) * parent_rate;
+}
+
+static int _setup_dynamic_ramp(struct tegra_clk_pll_params *pll_params,
+ void __iomem *clk_base,
+ unsigned long parent_rate)
+{
+ u32 val;
+ u32 step_a, step_b;
+
+ switch (parent_rate) {
+ case 12000000:
+ case 13000000:
+ case 26000000:
+ step_a = 0x2B;
+ step_b = 0x0B;
+ break;
+ case 16800000:
+ step_a = 0x1A;
+ step_b = 0x09;
+ break;
+ case 19200000:
+ step_a = 0x12;
+ step_b = 0x08;
+ break;
+ default:
+ pr_err("%s: Unexpected reference rate %lu\n",
+ __func__, parent_rate);
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ val = step_a << pll_params->stepa_shift;
+ val |= step_b << pll_params->stepb_shift;
+ writel_relaxed(val, clk_base + pll_params->dyn_ramp_reg);
+
+ return 0;
+}
+
static int clk_pll_iddq_enable(struct clk_hw *hw)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
@@ -1173,7 +1262,7 @@
unsigned long flags = 0;
unsigned long input_rate = clk_get_rate(clk_get_parent(hw->clk));
- if (_get_table_rate(hw, &sel, pll->fixed_rate, input_rate))
+ if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate))
return -EINVAL;
if (pll->lock)
@@ -1217,6 +1306,18 @@
if (ret < 0)
goto out;
+ val = pll_readl(PLLE_SS_CTRL, pll);
+ val &= ~(PLLE_SS_CNTL_CENTER | PLLE_SS_CNTL_INVERT);
+ val &= ~PLLE_SS_COEFFICIENTS_MASK;
+ val |= PLLE_SS_COEFFICIENTS_VAL;
+ pll_writel(val, PLLE_SS_CTRL, pll);
+ val &= ~(PLLE_SS_CNTL_SSC_BYP | PLLE_SS_CNTL_BYPASS_SS);
+ pll_writel(val, PLLE_SS_CTRL, pll);
+ udelay(1);
+ val &= ~PLLE_SS_CNTL_INTERP_RESET;
+ pll_writel(val, PLLE_SS_CTRL, pll);
+ udelay(1);
+
/* TODO: enable hw control of xusb brick pll */
out:
@@ -1248,9 +1349,8 @@
#endif
static struct tegra_clk_pll *_tegra_init_pll(void __iomem *clk_base,
- void __iomem *pmc, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+ void __iomem *pmc, struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock)
{
struct tegra_clk_pll *pll;
@@ -1261,10 +1361,7 @@
pll->clk_base = clk_base;
pll->pmc = pmc;
- pll->freq_table = freq_table;
pll->params = pll_params;
- pll->fixed_rate = fixed_rate;
- pll->flags = pll_flags;
pll->lock = lock;
if (!pll_params->div_nmp)
@@ -1293,17 +1390,15 @@
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+ unsigned long flags, struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock)
{
struct tegra_clk_pll *pll;
struct clk *clk;
- pll_flags |= TEGRA_PLL_BYPASS;
- pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
- pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
- freq_table, lock);
+ pll_params->flags |= TEGRA_PLL_BYPASS;
+ pll_params->flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);
@@ -1317,17 +1412,15 @@
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
+ unsigned long flags, struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock)
{
struct tegra_clk_pll *pll;
struct clk *clk;
- pll_flags |= TEGRA_PLL_LOCK_MISC | TEGRA_PLL_BYPASS;
- pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
- pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
- freq_table, lock);
+ pll_params->flags |= TEGRA_PLL_LOCK_MISC | TEGRA_PLL_BYPASS;
+ pll_params->flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);
@@ -1339,7 +1432,7 @@
return clk;
}
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
+#if defined(CONFIG_ARCH_TEGRA_114_SOC) || defined(CONFIG_ARCH_TEGRA_124_SOC)
const struct clk_ops tegra_clk_pllxc_ops = {
.is_enabled = clk_pll_is_enabled,
.enable = clk_pll_iddq_enable,
@@ -1386,21 +1479,46 @@
struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock)
{
struct tegra_clk_pll *pll;
- struct clk *clk;
+ struct clk *clk, *parent;
+ unsigned long parent_rate;
+ int err;
+ u32 val, val_iddq;
+
+ parent = __clk_lookup(parent_name);
+ if (!parent) {
+ WARN(1, "parent clk %s of %s must be registered first\n",
+ name, parent_name);
+ return ERR_PTR(-EINVAL);
+ }
if (!pll_params->pdiv_tohw)
return ERR_PTR(-EINVAL);
- pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
- pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
- freq_table, lock);
+ parent_rate = __clk_get_rate(parent);
+
+ pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
+
+ err = _setup_dynamic_ramp(pll_params, clk_base, parent_rate);
+ if (err)
+ return ERR_PTR(err);
+
+ val = readl_relaxed(clk_base + pll_params->base_reg);
+ val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg);
+
+ if (val & PLL_BASE_ENABLE)
+ WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx));
+ else {
+ val_iddq |= BIT(pll_params->iddq_bit_idx);
+ writel_relaxed(val_iddq, clk_base + pll_params->iddq_reg);
+ }
+
+ pll_params->flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);
@@ -1414,19 +1532,19 @@
struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock, unsigned long parent_rate)
{
u32 val;
struct tegra_clk_pll *pll;
struct clk *clk;
- pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_LOCK_MISC;
- pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
- freq_table, lock);
+ pll_params->flags |= TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_LOCK_MISC;
+
+ pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
+
+ pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);
@@ -1461,23 +1579,32 @@
struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock)
{
struct tegra_clk_pll *pll;
- struct clk *clk;
+ struct clk *clk, *parent;
+ unsigned long parent_rate;
if (!pll_params->pdiv_tohw)
return ERR_PTR(-EINVAL);
- pll_flags |= TEGRA_PLL_BYPASS;
- pll_flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
- pll_flags |= TEGRA_PLLM;
- pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
- freq_table, lock);
+ parent = __clk_lookup(parent_name);
+ if (!parent) {
+ WARN(1, "parent clk %s of %s must be registered first\n",
+ name, parent_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ parent_rate = __clk_get_rate(parent);
+
+ pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
+
+ pll_params->flags |= TEGRA_PLL_BYPASS;
+ pll_params->flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll_params->flags |= TEGRA_PLLM;
+ pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);
@@ -1491,10 +1618,8 @@
struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock)
{
struct clk *parent, *clk;
@@ -1507,20 +1632,21 @@
return ERR_PTR(-EINVAL);
parent = __clk_lookup(parent_name);
- if (IS_ERR(parent)) {
+ if (!parent) {
WARN(1, "parent clk %s of %s must be registered first\n",
name, parent_name);
return ERR_PTR(-EINVAL);
}
- pll_flags |= TEGRA_PLL_BYPASS;
- pll = _tegra_init_pll(clk_base, pmc, fixed_rate, pll_params, pll_flags,
- freq_table, lock);
+ parent_rate = __clk_get_rate(parent);
+
+ pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
+
+ pll_params->flags |= TEGRA_PLL_BYPASS;
+ pll = _tegra_init_pll(clk_base, pmc, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);
- parent_rate = __clk_get_rate(parent);
-
/*
* Most of PLLC register fields are shadowed, and can not be read
* directly from PLL h/w. Hence, actual PLLC boot state is unknown.
@@ -1567,17 +1693,15 @@
struct clk *tegra_clk_register_plle_tegra114(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
- unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock)
{
struct tegra_clk_pll *pll;
struct clk *clk;
u32 val, val_aux;
- pll = _tegra_init_pll(clk_base, NULL, fixed_rate, pll_params,
- TEGRA_PLL_HAS_LOCK_ENABLE, freq_table, lock);
+ pll_params->flags |= TEGRA_PLL_HAS_LOCK_ENABLE;
+ pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
if (IS_ERR(pll))
return ERR_CAST(pll);
@@ -1587,11 +1711,13 @@
val_aux = pll_readl(pll_params->aux_reg, pll);
if (val & PLL_BASE_ENABLE) {
- if (!(val_aux & PLLE_AUX_PLLRE_SEL))
+ if ((val_aux & PLLE_AUX_PLLRE_SEL) ||
+ (val_aux & PLLE_AUX_PLLP_SEL))
WARN(1, "pll_e enabled with unsupported parent %s\n",
- (val & PLLE_AUX_PLLP_SEL) ? "pllp_out0" : "pll_ref");
+ (val_aux & PLLE_AUX_PLLP_SEL) ? "pllp_out0" :
+ "pll_re_vco");
} else {
- val_aux |= PLLE_AUX_PLLRE_SEL;
+ val_aux &= ~(PLLE_AUX_PLLRE_SEL | PLLE_AUX_PLLP_SEL);
pll_writel(val, pll_params->aux_reg, pll);
}
@@ -1603,3 +1729,92 @@
return clk;
}
#endif
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+const struct clk_ops tegra_clk_pllss_ops = {
+ .is_enabled = clk_pll_is_enabled,
+ .enable = clk_pll_iddq_enable,
+ .disable = clk_pll_iddq_disable,
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_ramp_round_rate,
+ .set_rate = clk_pllxc_set_rate,
+};
+
+struct clk *tegra_clk_register_pllss(const char *name, const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock)
+{
+ struct tegra_clk_pll *pll;
+ struct clk *clk, *parent;
+ struct tegra_clk_pll_freq_table cfg;
+ unsigned long parent_rate;
+ u32 val;
+ int i;
+
+ if (!pll_params->div_nmp)
+ return ERR_PTR(-EINVAL);
+
+ parent = __clk_lookup(parent_name);
+ if (!parent) {
+ WARN(1, "parent clk %s of %s must be registered first\n",
+ name, parent_name);
+ return ERR_PTR(-EINVAL);
+ }
+
+ pll_params->flags = TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_USE_LOCK;
+ pll = _tegra_init_pll(clk_base, NULL, pll_params, lock);
+ if (IS_ERR(pll))
+ return ERR_CAST(pll);
+
+ val = pll_readl_base(pll);
+ val &= ~PLLSS_REF_SRC_SEL_MASK;
+ pll_writel_base(val, pll);
+
+ parent_rate = __clk_get_rate(parent);
+
+ pll_params->vco_min = _clip_vco_min(pll_params->vco_min, parent_rate);
+
+ /* initialize PLL to minimum rate */
+
+ cfg.m = _pll_fixed_mdiv(pll_params, parent_rate);
+ cfg.n = cfg.m * pll_params->vco_min / parent_rate;
+
+ for (i = 0; pll_params->pdiv_tohw[i].pdiv; i++)
+ ;
+ if (!i) {
+ kfree(pll);
+ return ERR_PTR(-EINVAL);
+ }
+
+ cfg.p = pll_params->pdiv_tohw[i-1].hw_val;
+
+ _update_pll_mnp(pll, &cfg);
+
+ pll_writel_misc(PLLSS_MISC_DEFAULT, pll);
+ pll_writel(PLLSS_CFG_DEFAULT, pll_params->ext_misc_reg[0], pll);
+ pll_writel(PLLSS_CTRL1_DEFAULT, pll_params->ext_misc_reg[1], pll);
+ pll_writel(PLLSS_CTRL1_DEFAULT, pll_params->ext_misc_reg[2], pll);
+
+ val = pll_readl_base(pll);
+ if (val & PLL_BASE_ENABLE) {
+ if (val & BIT(pll_params->iddq_bit_idx)) {
+ WARN(1, "%s is on but IDDQ set\n", name);
+ kfree(pll);
+ return ERR_PTR(-EINVAL);
+ }
+ } else
+ val |= BIT(pll_params->iddq_bit_idx);
+
+ val &= ~PLLSS_LOCK_OVERRIDE;
+ pll_writel_base(val, pll);
+
+ clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
+ &tegra_clk_pllss_ops);
+
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
+#endif
diff --git a/drivers/clk/tegra/clk-tegra-audio.c b/drivers/clk/tegra/clk-tegra-audio.c
new file mode 100644
index 0000000..5c38aab
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra-audio.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+#include "clk-id.h"
+
+#define AUDIO_SYNC_CLK_I2S0 0x4a0
+#define AUDIO_SYNC_CLK_I2S1 0x4a4
+#define AUDIO_SYNC_CLK_I2S2 0x4a8
+#define AUDIO_SYNC_CLK_I2S3 0x4ac
+#define AUDIO_SYNC_CLK_I2S4 0x4b0
+#define AUDIO_SYNC_CLK_SPDIF 0x4b4
+
+#define AUDIO_SYNC_DOUBLER 0x49c
+
+#define PLLA_OUT 0xb4
+
+struct tegra_sync_source_initdata {
+ char *name;
+ unsigned long rate;
+ unsigned long max_rate;
+ int clk_id;
+};
+
+#define SYNC(_name) \
+ {\
+ .name = #_name,\
+ .rate = 24000000,\
+ .max_rate = 24000000,\
+ .clk_id = tegra_clk_ ## _name,\
+ }
+
+struct tegra_audio_clk_initdata {
+ char *gate_name;
+ char *mux_name;
+ u32 offset;
+ int gate_clk_id;
+ int mux_clk_id;
+};
+
+#define AUDIO(_name, _offset) \
+ {\
+ .gate_name = #_name,\
+ .mux_name = #_name"_mux",\
+ .offset = _offset,\
+ .gate_clk_id = tegra_clk_ ## _name,\
+ .mux_clk_id = tegra_clk_ ## _name ## _mux,\
+ }
+
+struct tegra_audio2x_clk_initdata {
+ char *parent;
+ char *gate_name;
+ char *name_2x;
+ char *div_name;
+ int clk_id;
+ int clk_num;
+ u8 div_offset;
+};
+
+#define AUDIO2X(_name, _num, _offset) \
+ {\
+ .parent = #_name,\
+ .gate_name = #_name"_2x",\
+ .name_2x = #_name"_doubler",\
+ .div_name = #_name"_div",\
+ .clk_id = tegra_clk_ ## _name ## _2x,\
+ .clk_num = _num,\
+ .div_offset = _offset,\
+ }
+
+static DEFINE_SPINLOCK(clk_doubler_lock);
+
+static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync",
+ "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
+};
+
+static struct tegra_sync_source_initdata sync_source_clks[] __initdata = {
+ SYNC(spdif_in_sync),
+ SYNC(i2s0_sync),
+ SYNC(i2s1_sync),
+ SYNC(i2s2_sync),
+ SYNC(i2s3_sync),
+ SYNC(i2s4_sync),
+ SYNC(vimclk_sync),
+};
+
+static struct tegra_audio_clk_initdata audio_clks[] = {
+ AUDIO(audio0, AUDIO_SYNC_CLK_I2S0),
+ AUDIO(audio1, AUDIO_SYNC_CLK_I2S1),
+ AUDIO(audio2, AUDIO_SYNC_CLK_I2S2),
+ AUDIO(audio3, AUDIO_SYNC_CLK_I2S3),
+ AUDIO(audio4, AUDIO_SYNC_CLK_I2S4),
+ AUDIO(spdif, AUDIO_SYNC_CLK_SPDIF),
+};
+
+static struct tegra_audio2x_clk_initdata audio2x_clks[] = {
+ AUDIO2X(audio0, 113, 24),
+ AUDIO2X(audio1, 114, 25),
+ AUDIO2X(audio2, 115, 26),
+ AUDIO2X(audio3, 116, 27),
+ AUDIO2X(audio4, 117, 28),
+ AUDIO2X(spdif, 118, 29),
+};
+
+void __init tegra_audio_clk_init(void __iomem *clk_base,
+ void __iomem *pmc_base, struct tegra_clk *tegra_clks,
+ struct tegra_clk_pll_params *pll_a_params)
+{
+ struct clk *clk;
+ struct clk **dt_clk;
+ int i;
+
+ /* PLLA */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_pll_a, tegra_clks);
+ if (dt_clk) {
+ clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base,
+ pmc_base, 0, pll_a_params, NULL);
+ *dt_clk = clk;
+ }
+
+ /* PLLA_OUT0 */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_pll_a_out0, tegra_clks);
+ if (dt_clk) {
+ clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
+ clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
+ clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ *dt_clk = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sync_source_clks); i++) {
+ struct tegra_sync_source_initdata *data;
+
+ data = &sync_source_clks[i];
+
+ dt_clk = tegra_lookup_dt_id(data->clk_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ clk = tegra_clk_register_sync_source(data->name,
+ data->rate, data->max_rate);
+ *dt_clk = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(audio_clks); i++) {
+ struct tegra_audio_clk_initdata *data;
+
+ data = &audio_clks[i];
+ dt_clk = tegra_lookup_dt_id(data->mux_clk_id, tegra_clks);
+
+ if (!dt_clk)
+ continue;
+ clk = clk_register_mux(NULL, data->mux_name, mux_audio_sync_clk,
+ ARRAY_SIZE(mux_audio_sync_clk),
+ CLK_SET_RATE_NO_REPARENT,
+ clk_base + data->offset, 0, 3, 0,
+ NULL);
+ *dt_clk = clk;
+
+ dt_clk = tegra_lookup_dt_id(data->gate_clk_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ clk = clk_register_gate(NULL, data->gate_name, data->mux_name,
+ 0, clk_base + data->offset, 4,
+ CLK_GATE_SET_TO_DISABLE, NULL);
+ *dt_clk = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(audio2x_clks); i++) {
+ struct tegra_audio2x_clk_initdata *data;
+
+ data = &audio2x_clks[i];
+ dt_clk = tegra_lookup_dt_id(data->clk_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ clk = clk_register_fixed_factor(NULL, data->name_2x,
+ data->parent, CLK_SET_RATE_PARENT, 2, 1);
+ clk = tegra_clk_register_divider(data->div_name,
+ data->name_2x, clk_base + AUDIO_SYNC_DOUBLER,
+ 0, 0, data->div_offset, 1, 0,
+ &clk_doubler_lock);
+ clk = tegra_clk_register_periph_gate(data->gate_name,
+ data->div_name, TEGRA_PERIPH_NO_RESET,
+ clk_base, CLK_SET_RATE_PARENT, data->clk_num,
+ periph_clk_enb_refcnt);
+ *dt_clk = clk;
+ }
+}
+
diff --git a/drivers/clk/tegra/clk-tegra-fixed.c b/drivers/clk/tegra/clk-tegra-fixed.c
new file mode 100644
index 0000000..f3b7738
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra-fixed.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+#include "clk-id.h"
+
+#define OSC_CTRL 0x50
+#define OSC_CTRL_OSC_FREQ_SHIFT 28
+#define OSC_CTRL_PLL_REF_DIV_SHIFT 26
+
+int __init tegra_osc_clk_init(void __iomem *clk_base,
+ struct tegra_clk *tegra_clks,
+ unsigned long *input_freqs, int num,
+ unsigned long *osc_freq,
+ unsigned long *pll_ref_freq)
+{
+ struct clk *clk;
+ struct clk **dt_clk;
+ u32 val, pll_ref_div;
+ unsigned osc_idx;
+
+ val = readl_relaxed(clk_base + OSC_CTRL);
+ osc_idx = val >> OSC_CTRL_OSC_FREQ_SHIFT;
+
+ if (osc_idx < num)
+ *osc_freq = input_freqs[osc_idx];
+ else
+ *osc_freq = 0;
+
+ if (!*osc_freq) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m, tegra_clks);
+ if (!dt_clk)
+ return 0;
+
+ clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT,
+ *osc_freq);
+ *dt_clk = clk;
+
+ /* pll_ref */
+ val = (val >> OSC_CTRL_PLL_REF_DIV_SHIFT) & 3;
+ pll_ref_div = 1 << val;
+ dt_clk = tegra_lookup_dt_id(tegra_clk_pll_ref, tegra_clks);
+ if (!dt_clk)
+ return 0;
+
+ clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
+ 0, 1, pll_ref_div);
+ *dt_clk = clk;
+
+ if (pll_ref_freq)
+ *pll_ref_freq = *osc_freq / pll_ref_div;
+
+ return 0;
+}
+
+void __init tegra_fixed_clk_init(struct tegra_clk *tegra_clks)
+{
+ struct clk *clk;
+ struct clk **dt_clk;
+
+ /* clk_32k */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_clk_32k, tegra_clks);
+ if (dt_clk) {
+ clk = clk_register_fixed_rate(NULL, "clk_32k", NULL,
+ CLK_IS_ROOT, 32768);
+ *dt_clk = clk;
+ }
+
+ /* clk_m_div2 */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div2, tegra_clks);
+ if (dt_clk) {
+ clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 2);
+ *dt_clk = clk;
+ }
+
+ /* clk_m_div4 */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div4, tegra_clks);
+ if (dt_clk) {
+ clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
+ CLK_SET_RATE_PARENT, 1, 4);
+ *dt_clk = clk;
+ }
+}
+
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
new file mode 100644
index 0000000..5c35885
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -0,0 +1,674 @@
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+#include "clk-id.h"
+
+#define CLK_SOURCE_I2S0 0x1d8
+#define CLK_SOURCE_I2S1 0x100
+#define CLK_SOURCE_I2S2 0x104
+#define CLK_SOURCE_NDFLASH 0x160
+#define CLK_SOURCE_I2S3 0x3bc
+#define CLK_SOURCE_I2S4 0x3c0
+#define CLK_SOURCE_SPDIF_OUT 0x108
+#define CLK_SOURCE_SPDIF_IN 0x10c
+#define CLK_SOURCE_PWM 0x110
+#define CLK_SOURCE_ADX 0x638
+#define CLK_SOURCE_ADX1 0x670
+#define CLK_SOURCE_AMX 0x63c
+#define CLK_SOURCE_AMX1 0x674
+#define CLK_SOURCE_HDA 0x428
+#define CLK_SOURCE_HDA2CODEC_2X 0x3e4
+#define CLK_SOURCE_SBC1 0x134
+#define CLK_SOURCE_SBC2 0x118
+#define CLK_SOURCE_SBC3 0x11c
+#define CLK_SOURCE_SBC4 0x1b4
+#define CLK_SOURCE_SBC5 0x3c8
+#define CLK_SOURCE_SBC6 0x3cc
+#define CLK_SOURCE_SATA_OOB 0x420
+#define CLK_SOURCE_SATA 0x424
+#define CLK_SOURCE_NDSPEED 0x3f8
+#define CLK_SOURCE_VFIR 0x168
+#define CLK_SOURCE_SDMMC1 0x150
+#define CLK_SOURCE_SDMMC2 0x154
+#define CLK_SOURCE_SDMMC3 0x1bc
+#define CLK_SOURCE_SDMMC4 0x164
+#define CLK_SOURCE_CVE 0x140
+#define CLK_SOURCE_TVO 0x188
+#define CLK_SOURCE_TVDAC 0x194
+#define CLK_SOURCE_VDE 0x1c8
+#define CLK_SOURCE_CSITE 0x1d4
+#define CLK_SOURCE_LA 0x1f8
+#define CLK_SOURCE_TRACE 0x634
+#define CLK_SOURCE_OWR 0x1cc
+#define CLK_SOURCE_NOR 0x1d0
+#define CLK_SOURCE_MIPI 0x174
+#define CLK_SOURCE_I2C1 0x124
+#define CLK_SOURCE_I2C2 0x198
+#define CLK_SOURCE_I2C3 0x1b8
+#define CLK_SOURCE_I2C4 0x3c4
+#define CLK_SOURCE_I2C5 0x128
+#define CLK_SOURCE_I2C6 0x65c
+#define CLK_SOURCE_UARTA 0x178
+#define CLK_SOURCE_UARTB 0x17c
+#define CLK_SOURCE_UARTC 0x1a0
+#define CLK_SOURCE_UARTD 0x1c0
+#define CLK_SOURCE_UARTE 0x1c4
+#define CLK_SOURCE_3D 0x158
+#define CLK_SOURCE_2D 0x15c
+#define CLK_SOURCE_MPE 0x170
+#define CLK_SOURCE_UARTE 0x1c4
+#define CLK_SOURCE_VI_SENSOR 0x1a8
+#define CLK_SOURCE_VI 0x148
+#define CLK_SOURCE_EPP 0x16c
+#define CLK_SOURCE_MSENC 0x1f0
+#define CLK_SOURCE_TSEC 0x1f4
+#define CLK_SOURCE_HOST1X 0x180
+#define CLK_SOURCE_HDMI 0x18c
+#define CLK_SOURCE_DISP1 0x138
+#define CLK_SOURCE_DISP2 0x13c
+#define CLK_SOURCE_CILAB 0x614
+#define CLK_SOURCE_CILCD 0x618
+#define CLK_SOURCE_CILE 0x61c
+#define CLK_SOURCE_DSIALP 0x620
+#define CLK_SOURCE_DSIBLP 0x624
+#define CLK_SOURCE_TSENSOR 0x3b8
+#define CLK_SOURCE_D_AUDIO 0x3d0
+#define CLK_SOURCE_DAM0 0x3d8
+#define CLK_SOURCE_DAM1 0x3dc
+#define CLK_SOURCE_DAM2 0x3e0
+#define CLK_SOURCE_ACTMON 0x3e8
+#define CLK_SOURCE_EXTERN1 0x3ec
+#define CLK_SOURCE_EXTERN2 0x3f0
+#define CLK_SOURCE_EXTERN3 0x3f4
+#define CLK_SOURCE_I2CSLOW 0x3fc
+#define CLK_SOURCE_SE 0x42c
+#define CLK_SOURCE_MSELECT 0x3b4
+#define CLK_SOURCE_DFLL_REF 0x62c
+#define CLK_SOURCE_DFLL_SOC 0x630
+#define CLK_SOURCE_SOC_THERM 0x644
+#define CLK_SOURCE_XUSB_HOST_SRC 0x600
+#define CLK_SOURCE_XUSB_FALCON_SRC 0x604
+#define CLK_SOURCE_XUSB_FS_SRC 0x608
+#define CLK_SOURCE_XUSB_SS_SRC 0x610
+#define CLK_SOURCE_XUSB_DEV_SRC 0x60c
+#define CLK_SOURCE_ISP 0x144
+#define CLK_SOURCE_SOR0 0x414
+#define CLK_SOURCE_DPAUX 0x418
+#define CLK_SOURCE_SATA_OOB 0x420
+#define CLK_SOURCE_SATA 0x424
+#define CLK_SOURCE_ENTROPY 0x628
+#define CLK_SOURCE_VI_SENSOR2 0x658
+#define CLK_SOURCE_HDMI_AUDIO 0x668
+#define CLK_SOURCE_VIC03 0x678
+#define CLK_SOURCE_CLK72MHZ 0x66c
+
+#define MASK(x) (BIT(x) - 1)
+
+#define MUX(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, \
+ _clk_num, _gate_flags, _clk_id, _parents##_idx, 0,\
+ NULL)
+
+#define MUX_FLAGS(_name, _parents, _offset,\
+ _clk_num, _gate_flags, _clk_id, flags)\
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP,\
+ _clk_num, _gate_flags, _clk_id, _parents##_idx, flags,\
+ NULL)
+
+#define MUX8(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP,\
+ _clk_num, _gate_flags, _clk_id, _parents##_idx, 0,\
+ NULL)
+
+#define MUX8_NOGATE_LOCK(_name, _parents, _offset, _clk_id, _lock) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset, \
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP,\
+ 0, TEGRA_PERIPH_NO_GATE, _clk_id,\
+ _parents##_idx, 0, _lock)
+
+#define INT(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT| \
+ TEGRA_DIVIDER_ROUND_UP, _clk_num, _gate_flags,\
+ _clk_id, _parents##_idx, 0, NULL)
+
+#define INT_FLAGS(_name, _parents, _offset,\
+ _clk_num, _gate_flags, _clk_id, flags)\
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT| \
+ TEGRA_DIVIDER_ROUND_UP, _clk_num, _gate_flags,\
+ _clk_id, _parents##_idx, flags, NULL)
+
+#define INT8(_name, _parents, _offset,\
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT| \
+ TEGRA_DIVIDER_ROUND_UP, _clk_num, _gate_flags,\
+ _clk_id, _parents##_idx, 0, NULL)
+
+#define UART(_name, _parents, _offset,\
+ _clk_num, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 30, MASK(2), 0, 0, 16, 1, TEGRA_DIVIDER_UART| \
+ TEGRA_DIVIDER_ROUND_UP, _clk_num, 0, _clk_id,\
+ _parents##_idx, 0, NULL)
+
+#define I2C(_name, _parents, _offset,\
+ _clk_num, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ 30, MASK(2), 0, 0, 16, 0, TEGRA_DIVIDER_ROUND_UP,\
+ _clk_num, 0, _clk_id, _parents##_idx, 0, NULL)
+
+#define XUSB(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset, \
+ 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT| \
+ TEGRA_DIVIDER_ROUND_UP, _clk_num, _gate_flags,\
+ _clk_id, _parents##_idx, 0, NULL)
+
+#define AUDIO(_name, _offset, _clk_num,\
+ _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, mux_d_audio_clk, \
+ _offset, 16, 0xE01F, 0, 0, 8, 1, \
+ TEGRA_DIVIDER_ROUND_UP, _clk_num, _gate_flags, \
+ _clk_id, mux_d_audio_clk_idx, 0, NULL)
+
+#define NODIV(_name, _parents, _offset, \
+ _mux_shift, _mux_mask, _clk_num, \
+ _gate_flags, _clk_id, _lock) \
+ TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
+ _mux_shift, _mux_mask, 0, 0, 0, 0, 0,\
+ _clk_num, (_gate_flags) | TEGRA_PERIPH_NO_DIV,\
+ _clk_id, _parents##_idx, 0, _lock)
+
+#define GATE(_name, _parent_name, \
+ _clk_num, _gate_flags, _clk_id, _flags) \
+ { \
+ .name = _name, \
+ .clk_id = _clk_id, \
+ .p.parent_name = _parent_name, \
+ .periph = TEGRA_CLK_PERIPH(0, 0, 0, 0, 0, 0, 0, \
+ _clk_num, _gate_flags, 0, NULL), \
+ .flags = _flags \
+ }
+
+#define PLLP_BASE 0xa0
+#define PLLP_MISC 0xac
+#define PLLP_OUTA 0xa4
+#define PLLP_OUTB 0xa8
+#define PLLP_OUTC 0x67c
+
+#define PLL_BASE_LOCK BIT(27)
+#define PLL_MISC_LOCK_ENABLE 18
+
+static DEFINE_SPINLOCK(PLLP_OUTA_lock);
+static DEFINE_SPINLOCK(PLLP_OUTB_lock);
+static DEFINE_SPINLOCK(PLLP_OUTC_lock);
+static DEFINE_SPINLOCK(sor0_lock);
+
+#define MUX_I2S_SPDIF(_id) \
+static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { "pll_a_out0", \
+ #_id, "pll_p",\
+ "clk_m"};
+MUX_I2S_SPDIF(audio0)
+MUX_I2S_SPDIF(audio1)
+MUX_I2S_SPDIF(audio2)
+MUX_I2S_SPDIF(audio3)
+MUX_I2S_SPDIF(audio4)
+MUX_I2S_SPDIF(audio)
+
+#define mux_pllaout0_audio0_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio1_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio2_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio3_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio4_2x_pllp_clkm_idx NULL
+#define mux_pllaout0_audio_2x_pllp_clkm_idx NULL
+
+static const char *mux_pllp_pllc_pllm_clkm[] = {
+ "pll_p", "pll_c", "pll_m", "clk_m"
+};
+#define mux_pllp_pllc_pllm_clkm_idx NULL
+
+static const char *mux_pllp_pllc_pllm[] = { "pll_p", "pll_c", "pll_m" };
+#define mux_pllp_pllc_pllm_idx NULL
+
+static const char *mux_pllp_pllc_clk32_clkm[] = {
+ "pll_p", "pll_c", "clk_32k", "clk_m"
+};
+#define mux_pllp_pllc_clk32_clkm_idx NULL
+
+static const char *mux_plla_pllc_pllp_clkm[] = {
+ "pll_a_out0", "pll_c", "pll_p", "clk_m"
+};
+#define mux_plla_pllc_pllp_clkm_idx mux_pllp_pllc_pllm_clkm_idx
+
+static const char *mux_pllp_pllc2_c_c3_pllm_clkm[] = {
+ "pll_p", "pll_c2", "pll_c", "pll_c3", "pll_m", "clk_m"
+};
+static u32 mux_pllp_pllc2_c_c3_pllm_clkm_idx[] = {
+ [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6,
+};
+
+static const char *mux_pllp_clkm[] = {
+ "pll_p", "clk_m"
+};
+static u32 mux_pllp_clkm_idx[] = {
+ [0] = 0, [1] = 3,
+};
+
+static const char *mux_pllm_pllc2_c_c3_pllp_plla[] = {
+ "pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0"
+};
+#define mux_pllm_pllc2_c_c3_pllp_plla_idx mux_pllp_pllc2_c_c3_pllm_clkm_idx
+
+static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
+ "pll_p", "pll_m", "pll_d_out0", "pll_a_out0", "pll_c",
+ "pll_d2_out0", "clk_m"
+};
+#define mux_pllp_pllm_plld_plla_pllc_plld2_clkm_idx NULL
+
+static const char *mux_pllm_pllc_pllp_plla[] = {
+ "pll_m", "pll_c", "pll_p", "pll_a_out0"
+};
+#define mux_pllm_pllc_pllp_plla_idx mux_pllp_pllc_pllm_clkm_idx
+
+static const char *mux_pllp_pllc_clkm[] = {
+ "pll_p", "pll_c", "pll_m"
+};
+static u32 mux_pllp_pllc_clkm_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3,
+};
+
+static const char *mux_pllp_pllc_clkm_clk32[] = {
+ "pll_p", "pll_c", "clk_m", "clk_32k"
+};
+#define mux_pllp_pllc_clkm_clk32_idx NULL
+
+static const char *mux_plla_clk32_pllp_clkm_plle[] = {
+ "pll_a_out0", "clk_32k", "pll_p", "clk_m", "pll_e_out0"
+};
+#define mux_plla_clk32_pllp_clkm_plle_idx NULL
+
+static const char *mux_clkm_pllp_pllc_pllre[] = {
+ "clk_m", "pll_p", "pll_c", "pll_re_out"
+};
+static u32 mux_clkm_pllp_pllc_pllre_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3, [3] = 5,
+};
+
+static const char *mux_clkm_48M_pllp_480M[] = {
+ "clk_m", "pll_u_48M", "pll_p", "pll_u_480M"
+};
+#define mux_clkm_48M_pllp_480M_idx NULL
+
+static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = {
+ "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref"
+};
+static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7,
+};
+
+static const char *mux_d_audio_clk[] = {
+ "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync",
+ "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
+};
+static u32 mux_d_audio_clk_idx[] = {
+ [0] = 0, [1] = 0x8000, [2] = 0xc000, [3] = 0xE000, [4] = 0xE001,
+ [5] = 0xE002, [6] = 0xE003, [7] = 0xE004, [8] = 0xE005, [9] = 0xE007,
+};
+
+static const char *mux_pllp_plld_pllc_clkm[] = {
+ "pll_p", "pll_d_out0", "pll_c", "clk_m"
+};
+#define mux_pllp_plld_pllc_clkm_idx NULL
+static const char *mux_pllm_pllc_pllp_plla_clkm_pllc4[] = {
+ "pll_m", "pll_c", "pll_p", "pll_a_out0", "clk_m", "pll_c4",
+};
+static u32 mux_pllm_pllc_pllp_plla_clkm_pllc4_idx[] = {
+ [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 6, [5] = 7,
+};
+
+static const char *mux_pllp_clkm1[] = {
+ "pll_p", "clk_m",
+};
+#define mux_pllp_clkm1_idx NULL
+
+static const char *mux_pllp3_pllc_clkm[] = {
+ "pll_p_out3", "pll_c", "pll_c2", "clk_m",
+};
+#define mux_pllp3_pllc_clkm_idx NULL
+
+static const char *mux_pllm_pllc_pllp_plla_pllc2_c3_clkm[] = {
+ "pll_m", "pll_c", "pll_p", "pll_a", "pll_c2", "pll_c3", "clk_m"
+};
+static u32 mux_pllm_pllc_pllp_plla_pllc2_c3_clkm_idx[] = {
+ [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6,
+};
+
+static const char *mux_pllm_pllc2_c_c3_pllp_plla_pllc4[] = {
+ "pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0", "pll_c4",
+};
+static u32 mux_pllm_pllc2_c_c3_pllp_plla_pllc4_idx[] = {
+ [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6, [6] = 7,
+};
+
+static const char *mux_clkm_plldp_sor0lvds[] = {
+ "clk_m", "pll_dp", "sor0_lvds",
+};
+#define mux_clkm_plldp_sor0lvds_idx NULL
+
+static struct tegra_periph_init_data periph_clks[] = {
+ AUDIO("d_audio", CLK_SOURCE_D_AUDIO, 106, TEGRA_PERIPH_ON_APB, tegra_clk_d_audio),
+ AUDIO("dam0", CLK_SOURCE_DAM0, 108, TEGRA_PERIPH_ON_APB, tegra_clk_dam0),
+ AUDIO("dam1", CLK_SOURCE_DAM1, 109, TEGRA_PERIPH_ON_APB, tegra_clk_dam1),
+ AUDIO("dam2", CLK_SOURCE_DAM2, 110, TEGRA_PERIPH_ON_APB, tegra_clk_dam2),
+ I2C("i2c1", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, tegra_clk_i2c1),
+ I2C("i2c2", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, tegra_clk_i2c2),
+ I2C("i2c3", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, tegra_clk_i2c3),
+ I2C("i2c4", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, tegra_clk_i2c4),
+ I2C("i2c5", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, tegra_clk_i2c5),
+ INT("vde", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VDE, 61, 0, tegra_clk_vde),
+ INT("vi", mux_pllm_pllc_pllp_plla, CLK_SOURCE_VI, 20, 0, tegra_clk_vi),
+ INT("epp", mux_pllm_pllc_pllp_plla, CLK_SOURCE_EPP, 19, 0, tegra_clk_epp),
+ INT("host1x", mux_pllm_pllc_pllp_plla, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x),
+ INT("mpe", mux_pllm_pllc_pllp_plla, CLK_SOURCE_MPE, 60, 0, tegra_clk_mpe),
+ INT("2d", mux_pllm_pllc_pllp_plla, CLK_SOURCE_2D, 21, 0, tegra_clk_gr2d),
+ INT("3d", mux_pllm_pllc_pllp_plla, CLK_SOURCE_3D, 24, 0, tegra_clk_gr3d),
+ INT8("vde", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_VDE, 61, 0, tegra_clk_vde_8),
+ INT8("vi", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, 0, tegra_clk_vi_8),
+ INT8("vi", mux_pllm_pllc2_c_c3_pllp_plla_pllc4, CLK_SOURCE_VI, 20, 0, tegra_clk_vi_9),
+ INT8("epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, 0, tegra_clk_epp_8),
+ INT8("msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, TEGRA_PERIPH_WAR_1005168, tegra_clk_msenc),
+ INT8("tsec", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_TSEC, 83, 0, tegra_clk_tsec),
+ INT8("host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x_8),
+ INT8("se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, TEGRA_PERIPH_ON_APB, tegra_clk_se),
+ INT8("2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, 0, tegra_clk_gr2d_8),
+ INT8("3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, 0, tegra_clk_gr3d_8),
+ INT8("vic03", mux_pllm_pllc_pllp_plla_pllc2_c3_clkm, CLK_SOURCE_VIC03, 178, 0, tegra_clk_vic03),
+ INT_FLAGS("mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, 0, tegra_clk_mselect, CLK_IGNORE_UNUSED),
+ MUX("i2s0", mux_pllaout0_audio0_2x_pllp_clkm, CLK_SOURCE_I2S0, 30, TEGRA_PERIPH_ON_APB, tegra_clk_i2s0),
+ MUX("i2s1", mux_pllaout0_audio1_2x_pllp_clkm, CLK_SOURCE_I2S1, 11, TEGRA_PERIPH_ON_APB, tegra_clk_i2s1),
+ MUX("i2s2", mux_pllaout0_audio2_2x_pllp_clkm, CLK_SOURCE_I2S2, 18, TEGRA_PERIPH_ON_APB, tegra_clk_i2s2),
+ MUX("i2s3", mux_pllaout0_audio3_2x_pllp_clkm, CLK_SOURCE_I2S3, 101, TEGRA_PERIPH_ON_APB, tegra_clk_i2s3),
+ MUX("i2s4", mux_pllaout0_audio4_2x_pllp_clkm, CLK_SOURCE_I2S4, 102, TEGRA_PERIPH_ON_APB, tegra_clk_i2s4),
+ MUX("spdif_out", mux_pllaout0_audio_2x_pllp_clkm, CLK_SOURCE_SPDIF_OUT, 10, TEGRA_PERIPH_ON_APB, tegra_clk_spdif_out),
+ MUX("spdif_in", mux_pllp_pllc_pllm, CLK_SOURCE_SPDIF_IN, 10, TEGRA_PERIPH_ON_APB, tegra_clk_spdif_in),
+ MUX("pwm", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_PWM, 17, TEGRA_PERIPH_ON_APB, tegra_clk_pwm),
+ MUX("adx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX, 154, TEGRA_PERIPH_ON_APB, tegra_clk_adx),
+ MUX("amx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX, 153, TEGRA_PERIPH_ON_APB, tegra_clk_amx),
+ MUX("hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA, 125, TEGRA_PERIPH_ON_APB, tegra_clk_hda),
+ MUX("hda2codec_2x", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, TEGRA_PERIPH_ON_APB, tegra_clk_hda2codec_2x),
+ MUX("vfir", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VFIR, 7, TEGRA_PERIPH_ON_APB, tegra_clk_vfir),
+ MUX("sdmmc1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC1, 14, 0, tegra_clk_sdmmc1),
+ MUX("sdmmc2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC2, 9, 0, tegra_clk_sdmmc2),
+ MUX("sdmmc3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC3, 69, 0, tegra_clk_sdmmc3),
+ MUX("sdmmc4", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC4, 15, 0, tegra_clk_sdmmc4),
+ MUX("la", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_LA, 76, TEGRA_PERIPH_ON_APB, tegra_clk_la),
+ MUX("trace", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_TRACE, 77, TEGRA_PERIPH_ON_APB, tegra_clk_trace),
+ MUX("owr", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_OWR, 71, TEGRA_PERIPH_ON_APB, tegra_clk_owr),
+ MUX("nor", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NOR, 42, 0, tegra_clk_nor),
+ MUX("mipi", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_MIPI, 50, TEGRA_PERIPH_ON_APB, tegra_clk_mipi),
+ MUX("vi_sensor", mux_pllm_pllc_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor),
+ MUX("cilab", mux_pllp_pllc_clkm, CLK_SOURCE_CILAB, 144, 0, tegra_clk_cilab),
+ MUX("cilcd", mux_pllp_pllc_clkm, CLK_SOURCE_CILCD, 145, 0, tegra_clk_cilcd),
+ MUX("cile", mux_pllp_pllc_clkm, CLK_SOURCE_CILE, 146, 0, tegra_clk_cile),
+ MUX("dsialp", mux_pllp_pllc_clkm, CLK_SOURCE_DSIALP, 147, 0, tegra_clk_dsialp),
+ MUX("dsiblp", mux_pllp_pllc_clkm, CLK_SOURCE_DSIBLP, 148, 0, tegra_clk_dsiblp),
+ MUX("tsensor", mux_pllp_pllc_clkm_clk32, CLK_SOURCE_TSENSOR, 100, TEGRA_PERIPH_ON_APB, tegra_clk_tsensor),
+ MUX("actmon", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_ACTMON, 119, 0, tegra_clk_actmon),
+ MUX("dfll_ref", mux_pllp_clkm, CLK_SOURCE_DFLL_REF, 155, TEGRA_PERIPH_ON_APB, tegra_clk_dfll_ref),
+ MUX("dfll_soc", mux_pllp_clkm, CLK_SOURCE_DFLL_SOC, 155, TEGRA_PERIPH_ON_APB, tegra_clk_dfll_soc),
+ MUX("i2cslow", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_I2CSLOW, 81, TEGRA_PERIPH_ON_APB, tegra_clk_i2cslow),
+ MUX("sbc1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC1, 41, TEGRA_PERIPH_ON_APB, tegra_clk_sbc1),
+ MUX("sbc2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC2, 44, TEGRA_PERIPH_ON_APB, tegra_clk_sbc2),
+ MUX("sbc3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC3, 46, TEGRA_PERIPH_ON_APB, tegra_clk_sbc3),
+ MUX("sbc4", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC4, 68, TEGRA_PERIPH_ON_APB, tegra_clk_sbc4),
+ MUX("sbc5", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC5, 104, TEGRA_PERIPH_ON_APB, tegra_clk_sbc5),
+ MUX("sbc6", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC6, 105, TEGRA_PERIPH_ON_APB, tegra_clk_sbc6),
+ MUX("cve", mux_pllp_plld_pllc_clkm, CLK_SOURCE_CVE, 49, 0, tegra_clk_cve),
+ MUX("tvo", mux_pllp_plld_pllc_clkm, CLK_SOURCE_TVO, 49, 0, tegra_clk_tvo),
+ MUX("tvdac", mux_pllp_plld_pllc_clkm, CLK_SOURCE_TVDAC, 53, 0, tegra_clk_tvdac),
+ MUX("ndflash", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NDFLASH, 13, TEGRA_PERIPH_ON_APB, tegra_clk_ndflash),
+ MUX("ndspeed", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NDSPEED, 80, TEGRA_PERIPH_ON_APB, tegra_clk_ndspeed),
+ MUX("sata_oob", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SATA_OOB, 123, TEGRA_PERIPH_ON_APB, tegra_clk_sata_oob),
+ MUX("sata", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SATA, 124, TEGRA_PERIPH_ON_APB, tegra_clk_sata),
+ MUX("adx1", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX1, 180, TEGRA_PERIPH_ON_APB, tegra_clk_adx1),
+ MUX("amx1", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX1, 185, TEGRA_PERIPH_ON_APB, tegra_clk_amx1),
+ MUX("vi_sensor2", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR2, 20, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor2),
+ MUX8("sbc1", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC1, 41, TEGRA_PERIPH_ON_APB, tegra_clk_sbc1_8),
+ MUX8("sbc2", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC2, 44, TEGRA_PERIPH_ON_APB, tegra_clk_sbc2_8),
+ MUX8("sbc3", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC3, 46, TEGRA_PERIPH_ON_APB, tegra_clk_sbc3_8),
+ MUX8("sbc4", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC4, 68, TEGRA_PERIPH_ON_APB, tegra_clk_sbc4_8),
+ MUX8("sbc5", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC5, 104, TEGRA_PERIPH_ON_APB, tegra_clk_sbc5_8),
+ MUX8("sbc6", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SBC6, 105, TEGRA_PERIPH_ON_APB, tegra_clk_sbc6_8),
+ MUX8("ndflash", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, TEGRA_PERIPH_ON_APB, tegra_clk_ndflash_8),
+ MUX8("ndspeed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, TEGRA_PERIPH_ON_APB, tegra_clk_ndspeed_8),
+ MUX8("hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, 0, tegra_clk_hdmi),
+ MUX8("extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, 0, tegra_clk_extern1),
+ MUX8("extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, 0, tegra_clk_extern2),
+ MUX8("extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, 0, tegra_clk_extern3),
+ MUX8("soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, TEGRA_PERIPH_ON_APB, tegra_clk_soc_therm),
+ MUX8("vi_sensor", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor_8),
+ MUX8("isp", mux_pllm_pllc_pllp_plla_clkm_pllc4, CLK_SOURCE_ISP, 23, TEGRA_PERIPH_ON_APB, tegra_clk_isp_8),
+ MUX8("entropy", mux_pllp_clkm1, CLK_SOURCE_ENTROPY, 149, 0, tegra_clk_entropy),
+ MUX8("hdmi_audio", mux_pllp3_pllc_clkm, CLK_SOURCE_HDMI_AUDIO, 176, TEGRA_PERIPH_NO_RESET, tegra_clk_hdmi_audio),
+ MUX8("clk72mhz", mux_pllp3_pllc_clkm, CLK_SOURCE_CLK72MHZ, 177, TEGRA_PERIPH_NO_RESET, tegra_clk_clk72Mhz),
+ MUX8_NOGATE_LOCK("sor0_lvds", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_SOR0, tegra_clk_sor0_lvds, &sor0_lock),
+ MUX_FLAGS("csite", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_CSITE, 73, TEGRA_PERIPH_ON_APB, tegra_clk_csite, CLK_IGNORE_UNUSED),
+ NODIV("disp1", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP1, 29, 7, 27, 0, tegra_clk_disp1, NULL),
+ NODIV("disp2", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP2, 29, 7, 26, 0, tegra_clk_disp2, NULL),
+ NODIV("sor0", mux_clkm_plldp_sor0lvds, CLK_SOURCE_SOR0, 14, 3, 182, 0, tegra_clk_sor0, &sor0_lock),
+ UART("uarta", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTA, 6, tegra_clk_uarta),
+ UART("uartb", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, tegra_clk_uartb),
+ UART("uartc", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, tegra_clk_uartc),
+ UART("uartd", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, tegra_clk_uartd),
+ UART("uarte", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTE, 65, tegra_clk_uarte),
+ XUSB("xusb_host_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_host_src),
+ XUSB("xusb_falcon_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_falcon_src),
+ XUSB("xusb_fs_src", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_fs_src),
+ XUSB("xusb_ss_src", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_ss_src),
+ XUSB("xusb_dev_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_dev_src),
+};
+
+static struct tegra_periph_init_data gate_clks[] = {
+ GATE("rtc", "clk_32k", 4, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_rtc, 0),
+ GATE("timer", "clk_m", 5, 0, tegra_clk_timer, 0),
+ GATE("isp", "clk_m", 23, 0, tegra_clk_isp, 0),
+ GATE("vcp", "clk_m", 29, 0, tegra_clk_vcp, 0),
+ GATE("apbdma", "clk_m", 34, 0, tegra_clk_apbdma, 0),
+ GATE("kbc", "clk_32k", 36, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_kbc, 0),
+ GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, 0),
+ GATE("fuse_burn", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse_burn, 0),
+ GATE("kfuse", "clk_m", 40, TEGRA_PERIPH_ON_APB, tegra_clk_kfuse, 0),
+ GATE("apbif", "clk_m", 107, TEGRA_PERIPH_ON_APB, tegra_clk_apbif, 0),
+ GATE("hda2hdmi", "clk_m", 128, TEGRA_PERIPH_ON_APB, tegra_clk_hda2hdmi, 0),
+ GATE("bsea", "clk_m", 62, 0, tegra_clk_bsea, 0),
+ GATE("bsev", "clk_m", 63, 0, tegra_clk_bsev, 0),
+ GATE("mipi-cal", "clk_m", 56, 0, tegra_clk_mipi_cal, 0),
+ GATE("usbd", "clk_m", 22, 0, tegra_clk_usbd, 0),
+ GATE("usb2", "clk_m", 58, 0, tegra_clk_usb2, 0),
+ GATE("usb3", "clk_m", 59, 0, tegra_clk_usb3, 0),
+ GATE("csi", "pll_p_out3", 52, 0, tegra_clk_csi, 0),
+ GATE("afi", "clk_m", 72, 0, tegra_clk_afi, 0),
+ GATE("csus", "clk_m", 92, TEGRA_PERIPH_NO_RESET, tegra_clk_csus, 0),
+ GATE("dds", "clk_m", 150, TEGRA_PERIPH_ON_APB, tegra_clk_dds, 0),
+ GATE("dp2", "clk_m", 152, TEGRA_PERIPH_ON_APB, tegra_clk_dp2, 0),
+ GATE("dtv", "clk_m", 79, TEGRA_PERIPH_ON_APB, tegra_clk_dtv, 0),
+ GATE("xusb_host", "xusb_host_src", 89, 0, tegra_clk_xusb_host, 0),
+ GATE("xusb_ss", "xusb_ss_src", 156, 0, tegra_clk_xusb_ss, 0),
+ GATE("xusb_dev", "xusb_dev_src", 95, 0, tegra_clk_xusb_dev, 0),
+ GATE("dsia", "dsia_mux", 48, 0, tegra_clk_dsia, 0),
+ GATE("dsib", "dsib_mux", 82, 0, tegra_clk_dsib, 0),
+ GATE("emc", "emc_mux", 57, 0, tegra_clk_emc, CLK_IGNORE_UNUSED),
+ GATE("sata_cold", "clk_m", 129, TEGRA_PERIPH_ON_APB, tegra_clk_sata_cold, 0),
+ GATE("ispb", "clk_m", 3, 0, tegra_clk_ispb, 0),
+ GATE("vim2_clk", "clk_m", 11, 0, tegra_clk_vim2_clk, 0),
+ GATE("pcie", "clk_m", 70, 0, tegra_clk_pcie, 0),
+ GATE("dpaux", "clk_m", 181, 0, tegra_clk_dpaux, 0),
+ GATE("gpu", "pll_ref", 184, 0, tegra_clk_gpu, 0),
+};
+
+struct pll_out_data {
+ char *div_name;
+ char *pll_out_name;
+ u32 offset;
+ int clk_id;
+ u8 div_shift;
+ u8 div_flags;
+ u8 rst_shift;
+ spinlock_t *lock;
+};
+
+#define PLL_OUT(_num, _offset, _div_shift, _div_flags, _rst_shift, _id) \
+ {\
+ .div_name = "pll_p_out" #_num "_div",\
+ .pll_out_name = "pll_p_out" #_num,\
+ .offset = _offset,\
+ .div_shift = _div_shift,\
+ .div_flags = _div_flags | TEGRA_DIVIDER_FIXED |\
+ TEGRA_DIVIDER_ROUND_UP,\
+ .rst_shift = _rst_shift,\
+ .clk_id = tegra_clk_ ## _id,\
+ .lock = &_offset ##_lock,\
+ }
+
+static struct pll_out_data pllp_out_clks[] = {
+ PLL_OUT(1, PLLP_OUTA, 8, 0, 0, pll_p_out1),
+ PLL_OUT(2, PLLP_OUTA, 24, 0, 16, pll_p_out2),
+ PLL_OUT(2, PLLP_OUTA, 24, TEGRA_DIVIDER_INT, 16, pll_p_out2_int),
+ PLL_OUT(3, PLLP_OUTB, 8, 0, 0, pll_p_out3),
+ PLL_OUT(4, PLLP_OUTB, 24, 0, 16, pll_p_out4),
+ PLL_OUT(5, PLLP_OUTC, 24, 0, 16, pll_p_out5),
+};
+
+static void __init periph_clk_init(void __iomem *clk_base,
+ struct tegra_clk *tegra_clks)
+{
+ int i;
+ struct clk *clk;
+ struct clk **dt_clk;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clks); i++) {
+ struct tegra_clk_periph_regs *bank;
+ struct tegra_periph_init_data *data;
+
+ data = periph_clks + i;
+
+ dt_clk = tegra_lookup_dt_id(data->clk_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ bank = get_reg_bank(data->periph.gate.clk_num);
+ if (!bank)
+ continue;
+
+ data->periph.gate.regs = bank;
+ clk = tegra_clk_register_periph(data->name,
+ data->p.parent_names, data->num_parents,
+ &data->periph, clk_base, data->offset,
+ data->flags);
+ *dt_clk = clk;
+ }
+}
+
+static void __init gate_clk_init(void __iomem *clk_base,
+ struct tegra_clk *tegra_clks)
+{
+ int i;
+ struct clk *clk;
+ struct clk **dt_clk;
+
+ for (i = 0; i < ARRAY_SIZE(gate_clks); i++) {
+ struct tegra_periph_init_data *data;
+
+ data = gate_clks + i;
+
+ dt_clk = tegra_lookup_dt_id(data->clk_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ clk = tegra_clk_register_periph_gate(data->name,
+ data->p.parent_name, data->periph.gate.flags,
+ clk_base, data->flags,
+ data->periph.gate.clk_num,
+ periph_clk_enb_refcnt);
+ *dt_clk = clk;
+ }
+}
+
+static void __init init_pllp(void __iomem *clk_base, void __iomem *pmc_base,
+ struct tegra_clk *tegra_clks,
+ struct tegra_clk_pll_params *pll_params)
+{
+ struct clk *clk;
+ struct clk **dt_clk;
+ int i;
+
+ dt_clk = tegra_lookup_dt_id(tegra_clk_pll_p, tegra_clks);
+ if (dt_clk) {
+ /* PLLP */
+ clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base,
+ pmc_base, 0, pll_params, NULL);
+ clk_register_clkdev(clk, "pll_p", NULL);
+ *dt_clk = clk;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pllp_out_clks); i++) {
+ struct pll_out_data *data;
+
+ data = pllp_out_clks + i;
+
+ dt_clk = tegra_lookup_dt_id(data->clk_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ clk = tegra_clk_register_divider(data->div_name, "pll_p",
+ clk_base + data->offset, 0, data->div_flags,
+ data->div_shift, 8, 1, data->lock);
+ clk = tegra_clk_register_pll_out(data->pll_out_name,
+ data->div_name, clk_base + data->offset,
+ data->rst_shift + 1, data->rst_shift,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
+ data->lock);
+ *dt_clk = clk;
+ }
+}
+
+void __init tegra_periph_clk_init(void __iomem *clk_base,
+ void __iomem *pmc_base, struct tegra_clk *tegra_clks,
+ struct tegra_clk_pll_params *pll_params)
+{
+ init_pllp(clk_base, pmc_base, tegra_clks, pll_params);
+ periph_clk_init(clk_base, tegra_clks);
+ gate_clk_init(clk_base, tegra_clks);
+}
diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c
new file mode 100644
index 0000000..08b21c1
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra-pmc.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+#include "clk-id.h"
+
+#define PMC_CLK_OUT_CNTRL 0x1a8
+#define PMC_DPD_PADS_ORIDE 0x1c
+#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
+#define PMC_CTRL 0
+#define PMC_CTRL_BLINK_ENB 7
+#define PMC_BLINK_TIMER 0x40
+
+struct pmc_clk_init_data {
+ char *mux_name;
+ char *gate_name;
+ const char **parents;
+ int num_parents;
+ int mux_id;
+ int gate_id;
+ char *dev_name;
+ u8 mux_shift;
+ u8 gate_shift;
+};
+
+#define PMC_CLK(_num, _mux_shift, _gate_shift)\
+ {\
+ .mux_name = "clk_out_" #_num "_mux",\
+ .gate_name = "clk_out_" #_num,\
+ .parents = clk_out ##_num ##_parents,\
+ .num_parents = ARRAY_SIZE(clk_out ##_num ##_parents),\
+ .mux_id = tegra_clk_clk_out_ ##_num ##_mux,\
+ .gate_id = tegra_clk_clk_out_ ##_num,\
+ .dev_name = "extern" #_num,\
+ .mux_shift = _mux_shift,\
+ .gate_shift = _gate_shift,\
+ }
+
+static DEFINE_SPINLOCK(clk_out_lock);
+
+static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern1",
+};
+
+static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern2",
+};
+
+static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
+ "clk_m_div4", "extern3",
+};
+
+static struct pmc_clk_init_data pmc_clks[] = {
+ PMC_CLK(1, 6, 2),
+ PMC_CLK(2, 14, 10),
+ PMC_CLK(3, 22, 18),
+};
+
+void __init tegra_pmc_clk_init(void __iomem *pmc_base,
+ struct tegra_clk *tegra_clks)
+{
+ struct clk *clk;
+ struct clk **dt_clk;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pmc_clks); i++) {
+ struct pmc_clk_init_data *data;
+
+ data = pmc_clks + i;
+
+ dt_clk = tegra_lookup_dt_id(data->mux_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ clk = clk_register_mux(NULL, data->mux_name, data->parents,
+ data->num_parents, CLK_SET_RATE_NO_REPARENT,
+ pmc_base + PMC_CLK_OUT_CNTRL, data->mux_shift,
+ 3, 0, &clk_out_lock);
+ *dt_clk = clk;
+
+
+ dt_clk = tegra_lookup_dt_id(data->gate_id, tegra_clks);
+ if (!dt_clk)
+ continue;
+
+ clk = clk_register_gate(NULL, data->gate_name, data->mux_name,
+ 0, pmc_base + PMC_CLK_OUT_CNTRL,
+ data->gate_shift, 0, &clk_out_lock);
+ *dt_clk = clk;
+ clk_register_clkdev(clk, data->dev_name, data->gate_name);
+ }
+
+ /* blink */
+ writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
+ clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
+ pmc_base + PMC_DPD_PADS_ORIDE,
+ PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
+
+ dt_clk = tegra_lookup_dt_id(tegra_clk_blink, tegra_clks);
+ if (!dt_clk)
+ return;
+
+ clk = clk_register_gate(NULL, "blink", "blink_override", 0,
+ pmc_base + PMC_CTRL,
+ PMC_CTRL_BLINK_ENB, 0, NULL);
+ clk_register_clkdev(clk, "blink", NULL);
+ *dt_clk = clk;
+}
+
diff --git a/drivers/clk/tegra/clk-tegra-super-gen4.c b/drivers/clk/tegra/clk-tegra-super-gen4.c
new file mode 100644
index 0000000..05dce4a
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra-super-gen4.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk/tegra.h>
+
+#include "clk.h"
+#include "clk-id.h"
+
+#define PLLX_BASE 0xe0
+#define PLLX_MISC 0xe4
+#define PLLX_MISC2 0x514
+#define PLLX_MISC3 0x518
+
+#define CCLKG_BURST_POLICY 0x368
+#define CCLKLP_BURST_POLICY 0x370
+#define SCLK_BURST_POLICY 0x028
+#define SYSTEM_CLK_RATE 0x030
+
+static DEFINE_SPINLOCK(sysrate_lock);
+
+static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
+ "pll_p", "pll_p_out2", "unused",
+ "clk_32k", "pll_m_out1" };
+
+static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p", "pll_p_out4", "unused",
+ "unused", "pll_x" };
+
+static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
+ "pll_p", "pll_p_out4", "unused",
+ "unused", "pll_x", "pll_x_out0" };
+
+static void __init tegra_sclk_init(void __iomem *clk_base,
+ struct tegra_clk *tegra_clks)
+{
+ struct clk *clk;
+ struct clk **dt_clk;
+
+ /* SCLK */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_sclk, tegra_clks);
+ if (dt_clk) {
+ clk = tegra_clk_register_super_mux("sclk", sclk_parents,
+ ARRAY_SIZE(sclk_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + SCLK_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ *dt_clk = clk;
+ }
+
+ /* HCLK */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_hclk, tegra_clks);
+ if (dt_clk) {
+ clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 4, 2, 0,
+ &sysrate_lock);
+ clk = clk_register_gate(NULL, "hclk", "hclk_div",
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ clk_base + SYSTEM_CLK_RATE,
+ 7, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
+ *dt_clk = clk;
+ }
+
+ /* PCLK */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_pclk, tegra_clks);
+ if (!dt_clk)
+ return;
+
+ clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
+ clk_base + SYSTEM_CLK_RATE, 0, 2, 0,
+ &sysrate_lock);
+ clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT |
+ CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
+ 3, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
+ *dt_clk = clk;
+}
+
+void __init tegra_super_clk_gen4_init(void __iomem *clk_base,
+ void __iomem *pmc_base,
+ struct tegra_clk *tegra_clks,
+ struct tegra_clk_pll_params *params)
+{
+ struct clk *clk;
+ struct clk **dt_clk;
+
+ /* CCLKG */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_cclk_g, tegra_clks);
+ if (dt_clk) {
+ clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents,
+ ARRAY_SIZE(cclk_g_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKG_BURST_POLICY,
+ 0, 4, 0, 0, NULL);
+ *dt_clk = clk;
+ }
+
+ /* CCLKLP */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_cclk_lp, tegra_clks);
+ if (dt_clk) {
+ clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents,
+ ARRAY_SIZE(cclk_lp_parents),
+ CLK_SET_RATE_PARENT,
+ clk_base + CCLKLP_BURST_POLICY,
+ 0, 4, 8, 9, NULL);
+ *dt_clk = clk;
+ }
+
+ tegra_sclk_init(clk_base, tegra_clks);
+
+#if defined(CONFIG_ARCH_TEGRA_114_SOC) || defined(CONFIG_ARCH_TEGRA_124_SOC)
+ /* PLLX */
+ dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x, tegra_clks);
+ if (!dt_clk)
+ return;
+
+ clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
+ pmc_base, CLK_IGNORE_UNUSED, params, NULL);
+ *dt_clk = clk;
+
+ /* PLLX_OUT0 */
+
+ dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x_out0, tegra_clks);
+ if (!dt_clk)
+ return;
+ clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
+ CLK_SET_RATE_PARENT, 1, 2);
+ *dt_clk = clk;
+#endif
+}
+
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index 9467da7..90d9d25 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -23,30 +23,15 @@
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/clk/tegra.h>
+#include <dt-bindings/clock/tegra114-car.h>
#include "clk.h"
+#include "clk-id.h"
-#define RST_DEVICES_L 0x004
-#define RST_DEVICES_H 0x008
-#define RST_DEVICES_U 0x00C
#define RST_DFLL_DVCO 0x2F4
-#define RST_DEVICES_V 0x358
-#define RST_DEVICES_W 0x35C
-#define RST_DEVICES_X 0x28C
-#define RST_DEVICES_SET_L 0x300
-#define RST_DEVICES_CLR_L 0x304
-#define RST_DEVICES_SET_H 0x308
-#define RST_DEVICES_CLR_H 0x30c
-#define RST_DEVICES_SET_U 0x310
-#define RST_DEVICES_CLR_U 0x314
-#define RST_DEVICES_SET_V 0x430
-#define RST_DEVICES_CLR_V 0x434
-#define RST_DEVICES_SET_W 0x438
-#define RST_DEVICES_CLR_W 0x43c
#define CPU_FINETRIM_SELECT 0x4d4 /* override default prop dlys */
#define CPU_FINETRIM_DR 0x4d8 /* rise->rise prop dly A */
#define CPU_FINETRIM_R 0x4e4 /* rise->rise prop dly inc A */
-#define RST_DEVICES_NUM 5
/* RST_DFLL_DVCO bitfields */
#define DVFS_DFLL_RESET_SHIFT 0
@@ -73,25 +58,7 @@
#define CPU_FINETRIM_R_FCPU_6_SHIFT 10 /* ftop */
#define CPU_FINETRIM_R_FCPU_6_MASK (0x3 << CPU_FINETRIM_R_FCPU_6_SHIFT)
-#define CLK_OUT_ENB_L 0x010
-#define CLK_OUT_ENB_H 0x014
-#define CLK_OUT_ENB_U 0x018
-#define CLK_OUT_ENB_V 0x360
-#define CLK_OUT_ENB_W 0x364
-#define CLK_OUT_ENB_X 0x280
-#define CLK_OUT_ENB_SET_L 0x320
-#define CLK_OUT_ENB_CLR_L 0x324
-#define CLK_OUT_ENB_SET_H 0x328
-#define CLK_OUT_ENB_CLR_H 0x32c
-#define CLK_OUT_ENB_SET_U 0x330
-#define CLK_OUT_ENB_CLR_U 0x334
-#define CLK_OUT_ENB_SET_V 0x440
-#define CLK_OUT_ENB_CLR_V 0x444
-#define CLK_OUT_ENB_SET_W 0x448
-#define CLK_OUT_ENB_CLR_W 0x44c
-#define CLK_OUT_ENB_SET_X 0x284
-#define CLK_OUT_ENB_CLR_X 0x288
-#define CLK_OUT_ENB_NUM 6
+#define TEGRA114_CLK_PERIPH_BANKS 5
#define PLLC_BASE 0x80
#define PLLC_MISC2 0x88
@@ -139,25 +106,6 @@
#define PLLE_AUX 0x48c
#define PLLC_OUT 0x84
#define PLLM_OUT 0x94
-#define PLLP_OUTA 0xa4
-#define PLLP_OUTB 0xa8
-#define PLLA_OUT 0xb4
-
-#define AUDIO_SYNC_CLK_I2S0 0x4a0
-#define AUDIO_SYNC_CLK_I2S1 0x4a4
-#define AUDIO_SYNC_CLK_I2S2 0x4a8
-#define AUDIO_SYNC_CLK_I2S3 0x4ac
-#define AUDIO_SYNC_CLK_I2S4 0x4b0
-#define AUDIO_SYNC_CLK_SPDIF 0x4b4
-
-#define AUDIO_SYNC_DOUBLER 0x49c
-
-#define PMC_CLK_OUT_CNTRL 0x1a8
-#define PMC_DPD_PADS_ORIDE 0x1c
-#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
-#define PMC_CTRL 0
-#define PMC_CTRL_BLINK_ENB 7
-#define PMC_BLINK_TIMER 0x40
#define OSC_CTRL 0x50
#define OSC_CTRL_OSC_FREQ_SHIFT 28
@@ -166,9 +114,6 @@
#define PLLXC_SW_MAX_P 6
#define CCLKG_BURST_POLICY 0x368
-#define CCLKLP_BURST_POLICY 0x370
-#define SCLK_BURST_POLICY 0x028
-#define SYSTEM_CLK_RATE 0x030
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
@@ -196,91 +141,8 @@
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
-#define CLK_SOURCE_I2S0 0x1d8
-#define CLK_SOURCE_I2S1 0x100
-#define CLK_SOURCE_I2S2 0x104
-#define CLK_SOURCE_NDFLASH 0x160
-#define CLK_SOURCE_I2S3 0x3bc
-#define CLK_SOURCE_I2S4 0x3c0
-#define CLK_SOURCE_SPDIF_OUT 0x108
-#define CLK_SOURCE_SPDIF_IN 0x10c
-#define CLK_SOURCE_PWM 0x110
-#define CLK_SOURCE_ADX 0x638
-#define CLK_SOURCE_AMX 0x63c
-#define CLK_SOURCE_HDA 0x428
-#define CLK_SOURCE_HDA2CODEC_2X 0x3e4
-#define CLK_SOURCE_SBC1 0x134
-#define CLK_SOURCE_SBC2 0x118
-#define CLK_SOURCE_SBC3 0x11c
-#define CLK_SOURCE_SBC4 0x1b4
-#define CLK_SOURCE_SBC5 0x3c8
-#define CLK_SOURCE_SBC6 0x3cc
-#define CLK_SOURCE_SATA_OOB 0x420
-#define CLK_SOURCE_SATA 0x424
-#define CLK_SOURCE_NDSPEED 0x3f8
-#define CLK_SOURCE_VFIR 0x168
-#define CLK_SOURCE_SDMMC1 0x150
-#define CLK_SOURCE_SDMMC2 0x154
-#define CLK_SOURCE_SDMMC3 0x1bc
-#define CLK_SOURCE_SDMMC4 0x164
-#define CLK_SOURCE_VDE 0x1c8
#define CLK_SOURCE_CSITE 0x1d4
-#define CLK_SOURCE_LA 0x1f8
-#define CLK_SOURCE_TRACE 0x634
-#define CLK_SOURCE_OWR 0x1cc
-#define CLK_SOURCE_NOR 0x1d0
-#define CLK_SOURCE_MIPI 0x174
-#define CLK_SOURCE_I2C1 0x124
-#define CLK_SOURCE_I2C2 0x198
-#define CLK_SOURCE_I2C3 0x1b8
-#define CLK_SOURCE_I2C4 0x3c4
-#define CLK_SOURCE_I2C5 0x128
-#define CLK_SOURCE_UARTA 0x178
-#define CLK_SOURCE_UARTB 0x17c
-#define CLK_SOURCE_UARTC 0x1a0
-#define CLK_SOURCE_UARTD 0x1c0
-#define CLK_SOURCE_UARTE 0x1c4
-#define CLK_SOURCE_UARTA_DBG 0x178
-#define CLK_SOURCE_UARTB_DBG 0x17c
-#define CLK_SOURCE_UARTC_DBG 0x1a0
-#define CLK_SOURCE_UARTD_DBG 0x1c0
-#define CLK_SOURCE_UARTE_DBG 0x1c4
-#define CLK_SOURCE_3D 0x158
-#define CLK_SOURCE_2D 0x15c
-#define CLK_SOURCE_VI_SENSOR 0x1a8
-#define CLK_SOURCE_VI 0x148
-#define CLK_SOURCE_EPP 0x16c
-#define CLK_SOURCE_MSENC 0x1f0
-#define CLK_SOURCE_TSEC 0x1f4
-#define CLK_SOURCE_HOST1X 0x180
-#define CLK_SOURCE_HDMI 0x18c
-#define CLK_SOURCE_DISP1 0x138
-#define CLK_SOURCE_DISP2 0x13c
-#define CLK_SOURCE_CILAB 0x614
-#define CLK_SOURCE_CILCD 0x618
-#define CLK_SOURCE_CILE 0x61c
-#define CLK_SOURCE_DSIALP 0x620
-#define CLK_SOURCE_DSIBLP 0x624
-#define CLK_SOURCE_TSENSOR 0x3b8
-#define CLK_SOURCE_D_AUDIO 0x3d0
-#define CLK_SOURCE_DAM0 0x3d8
-#define CLK_SOURCE_DAM1 0x3dc
-#define CLK_SOURCE_DAM2 0x3e0
-#define CLK_SOURCE_ACTMON 0x3e8
-#define CLK_SOURCE_EXTERN1 0x3ec
-#define CLK_SOURCE_EXTERN2 0x3f0
-#define CLK_SOURCE_EXTERN3 0x3f4
-#define CLK_SOURCE_I2CSLOW 0x3fc
-#define CLK_SOURCE_SE 0x42c
-#define CLK_SOURCE_MSELECT 0x3b4
-#define CLK_SOURCE_DFLL_REF 0x62c
-#define CLK_SOURCE_DFLL_SOC 0x630
-#define CLK_SOURCE_SOC_THERM 0x644
-#define CLK_SOURCE_XUSB_HOST_SRC 0x600
-#define CLK_SOURCE_XUSB_FALCON_SRC 0x604
-#define CLK_SOURCE_XUSB_FS_SRC 0x608
#define CLK_SOURCE_XUSB_SS_SRC 0x610
-#define CLK_SOURCE_XUSB_DEV_SRC 0x60c
#define CLK_SOURCE_EMC 0x19c
/* PLLM override registers */
@@ -298,19 +160,13 @@
} tegra114_cpu_clk_sctx;
#endif
-static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
-
static void __iomem *clk_base;
static void __iomem *pmc_base;
static DEFINE_SPINLOCK(pll_d_lock);
static DEFINE_SPINLOCK(pll_d2_lock);
static DEFINE_SPINLOCK(pll_u_lock);
-static DEFINE_SPINLOCK(pll_div_lock);
static DEFINE_SPINLOCK(pll_re_lock);
-static DEFINE_SPINLOCK(clk_doubler_lock);
-static DEFINE_SPINLOCK(clk_out_lock);
-static DEFINE_SPINLOCK(sysrate_lock);
static struct div_nmp pllxc_nmp = {
.divm_shift = 0,
@@ -370,6 +226,8 @@
.stepb_shift = 9,
.pdiv_tohw = pllxc_p,
.div_nmp = &pllxc_nmp,
+ .freq_table = pll_c_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
};
static struct div_nmp pllcx_nmp = {
@@ -417,6 +275,8 @@
.ext_misc_reg[0] = 0x4f0,
.ext_misc_reg[1] = 0x4f4,
.ext_misc_reg[2] = 0x4f8,
+ .freq_table = pll_cx_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_params pll_c3_params = {
@@ -437,6 +297,8 @@
.ext_misc_reg[0] = 0x504,
.ext_misc_reg[1] = 0x508,
.ext_misc_reg[2] = 0x50c,
+ .freq_table = pll_cx_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
};
static struct div_nmp pllm_nmp = {
@@ -483,6 +345,8 @@
.div_nmp = &pllm_nmp,
.pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE,
.pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE_2,
+ .freq_table = pll_m_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
};
static struct div_nmp pllp_nmp = {
@@ -516,6 +380,9 @@
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
.div_nmp = &pllp_nmp,
+ .freq_table = pll_p_freq_table,
+ .flags = TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK,
+ .fixed_rate = 408000000,
};
static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
@@ -543,6 +410,8 @@
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
.div_nmp = &pllp_nmp,
+ .freq_table = pll_a_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
@@ -579,6 +448,9 @@
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
.div_nmp = &pllp_nmp,
+ .freq_table = pll_d_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_params pll_d2_params = {
@@ -594,6 +466,9 @@
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
.div_nmp = &pllp_nmp,
+ .freq_table = pll_d_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK,
};
static struct pdiv_map pllu_p[] = {
@@ -634,6 +509,9 @@
.lock_delay = 1000,
.pdiv_tohw = pllu_p,
.div_nmp = &pllu_nmp,
+ .freq_table = pll_u_freq_table,
+ .flags = TEGRA_PLLU | TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
@@ -667,12 +545,15 @@
.stepb_shift = 24,
.pdiv_tohw = pllxc_p,
.div_nmp = &pllxc_nmp,
+ .freq_table = pll_x_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
/* PLLE special case: use cpcon field to store cml divider value */
{336000000, 100000000, 100, 21, 16, 11},
{312000000, 100000000, 200, 26, 24, 13},
+ {12000000, 100000000, 200, 1, 24, 13},
{0, 0, 0, 0, 0, 0},
};
@@ -699,6 +580,9 @@
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 300,
.div_nmp = &plle_nmp,
+ .freq_table = pll_e_freq_table,
+ .flags = TEGRA_PLL_FIXED,
+ .fixed_rate = 100000000,
};
static struct div_nmp pllre_nmp = {
@@ -725,53 +609,7 @@
.iddq_reg = PLLRE_MISC,
.iddq_bit_idx = PLLRE_IDDQ_BIT,
.div_nmp = &pllre_nmp,
-};
-
-/* Peripheral clock registers */
-
-static struct tegra_clk_periph_regs periph_l_regs = {
- .enb_reg = CLK_OUT_ENB_L,
- .enb_set_reg = CLK_OUT_ENB_SET_L,
- .enb_clr_reg = CLK_OUT_ENB_CLR_L,
- .rst_reg = RST_DEVICES_L,
- .rst_set_reg = RST_DEVICES_SET_L,
- .rst_clr_reg = RST_DEVICES_CLR_L,
-};
-
-static struct tegra_clk_periph_regs periph_h_regs = {
- .enb_reg = CLK_OUT_ENB_H,
- .enb_set_reg = CLK_OUT_ENB_SET_H,
- .enb_clr_reg = CLK_OUT_ENB_CLR_H,
- .rst_reg = RST_DEVICES_H,
- .rst_set_reg = RST_DEVICES_SET_H,
- .rst_clr_reg = RST_DEVICES_CLR_H,
-};
-
-static struct tegra_clk_periph_regs periph_u_regs = {
- .enb_reg = CLK_OUT_ENB_U,
- .enb_set_reg = CLK_OUT_ENB_SET_U,
- .enb_clr_reg = CLK_OUT_ENB_CLR_U,
- .rst_reg = RST_DEVICES_U,
- .rst_set_reg = RST_DEVICES_SET_U,
- .rst_clr_reg = RST_DEVICES_CLR_U,
-};
-
-static struct tegra_clk_periph_regs periph_v_regs = {
- .enb_reg = CLK_OUT_ENB_V,
- .enb_set_reg = CLK_OUT_ENB_SET_V,
- .enb_clr_reg = CLK_OUT_ENB_CLR_V,
- .rst_reg = RST_DEVICES_V,
- .rst_set_reg = RST_DEVICES_SET_V,
- .rst_clr_reg = RST_DEVICES_CLR_V,
-};
-
-static struct tegra_clk_periph_regs periph_w_regs = {
- .enb_reg = CLK_OUT_ENB_W,
- .enb_set_reg = CLK_OUT_ENB_SET_W,
- .enb_clr_reg = CLK_OUT_ENB_CLR_W,
- .rst_reg = RST_DEVICES_W,
- .rst_set_reg = RST_DEVICES_SET_W,
- .rst_clr_reg = RST_DEVICES_CLR_W,
+ .flags = TEGRA_PLL_USE_LOCK,
};
/* possible OSC frequencies in Hz */
@@ -787,120 +625,6 @@
#define MASK(x) (BIT(x) - 1)
-#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \
- periph_clk_enb_refcnt, _gate_flags, _clk_id, \
- _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_MUX_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\
- _clk_num, _regs, _gate_flags, _clk_id, flags)\
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 30, MASK(2), 0, 0, 8, 1, 0, _regs, _clk_num, \
- periph_clk_enb_refcnt, _gate_flags, _clk_id, \
- _parents##_idx, flags)
-
-#define TEGRA_INIT_DATA_MUX8(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 29, MASK(3), 0, 0, 8, 1, 0, _regs, _clk_num, \
- periph_clk_enb_refcnt, _gate_flags, _clk_id, \
- _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
- _clk_id, _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_INT_FLAGS(_name, _con_id, _dev_id, _parents, _offset,\
- _clk_num, _regs, _gate_flags, _clk_id, flags)\
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 30, MASK(2), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
- _clk_id, _parents##_idx, flags)
-
-#define TEGRA_INIT_DATA_INT8(_name, _con_id, _dev_id, _parents, _offset,\
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs,\
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
- _clk_id, _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_UART(_name, _con_id, _dev_id, _parents, _offset,\
- _clk_num, _regs, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 30, MASK(2), 0, 0, 16, 1, TEGRA_DIVIDER_UART, _regs,\
- _clk_num, periph_clk_enb_refcnt, 0, _clk_id, \
- _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_I2C(_name, _con_id, _dev_id, _parents, _offset,\
- _clk_num, _regs, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- 30, MASK(2), 0, 0, 16, 0, 0, _regs, _clk_num, \
- periph_clk_enb_refcnt, 0, _clk_id, _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \
- _mux_shift, _mux_mask, _clk_num, _regs, \
- _gate_flags, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset,\
- _mux_shift, _mux_mask, 0, 0, 0, 0, 0, _regs, \
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
- _clk_id, _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_XUSB(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parents, _offset, \
- 29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
- _clk_id, _parents##_idx, 0)
-
-#define TEGRA_INIT_DATA_AUDIO(_name, _con_id, _dev_id, _offset, _clk_num,\
- _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, mux_d_audio_clk, \
- _offset, 16, 0xE01F, 0, 0, 8, 1, 0, _regs, _clk_num, \
- periph_clk_enb_refcnt, _gate_flags , _clk_id, \
- mux_d_audio_clk_idx, 0)
-
-enum tegra114_clk {
- rtc = 4, timer = 5, uarta = 6, sdmmc2 = 9, i2s1 = 11, i2c1 = 12,
- ndflash = 13, sdmmc1 = 14, sdmmc4 = 15, pwm = 17, i2s2 = 18, epp = 19,
- gr_2d = 21, usbd = 22, isp = 23, gr_3d = 24, disp2 = 26, disp1 = 27,
- host1x = 28, vcp = 29, i2s0 = 30, apbdma = 34, kbc = 36, kfuse = 40,
- sbc1 = 41, nor = 42, sbc2 = 44, sbc3 = 46, i2c5 = 47, dsia = 48,
- mipi = 50, hdmi = 51, csi = 52, i2c2 = 54, uartc = 55, mipi_cal = 56,
- emc, usb2, usb3, vde = 61, bsea = 62, bsev = 63, uartd = 65,
- i2c3 = 67, sbc4 = 68, sdmmc3 = 69, owr = 71, csite = 73,
- la = 76, trace = 77, soc_therm = 78, dtv = 79, ndspeed = 80,
- i2cslow = 81, dsib = 82, tsec = 83, xusb_host = 89, msenc = 91,
- csus = 92, mselect = 99, tsensor = 100, i2s3 = 101, i2s4 = 102,
- i2c4 = 103, sbc5 = 104, sbc6 = 105, d_audio, apbif = 107, dam0, dam1,
- dam2, hda2codec_2x = 111, audio0_2x = 113, audio1_2x, audio2_2x,
- audio3_2x, audio4_2x, spdif_2x, actmon = 119, extern1 = 120,
- extern2 = 121, extern3 = 122, hda = 125, se = 127, hda2hdmi = 128,
- cilab = 144, cilcd = 145, cile = 146, dsialp = 147, dsiblp = 148,
- dds = 150, dp2 = 152, amx = 153, adx = 154, xusb_ss = 156, uartb = 192,
- vfir, spdif_in, spdif_out, vi, vi_sensor, fuse, fuse_burn, clk_32k,
- clk_m, clk_m_div2, clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_c2,
- pll_c3, pll_m, pll_m_out1, pll_p, pll_p_out1, pll_p_out2, pll_p_out3,
- pll_p_out4, pll_a, pll_a_out0, pll_d, pll_d_out0, pll_d2, pll_d2_out0,
- pll_u, pll_u_480M, pll_u_60M, pll_u_48M, pll_u_12M, pll_x, pll_x_out0,
- pll_re_vco, pll_re_out, pll_e_out0, spdif_in_sync, i2s0_sync,
- i2s1_sync, i2s2_sync, i2s3_sync, i2s4_sync, vimclk_sync, audio0,
- audio1, audio2, audio3, audio4, spdif, clk_out_1, clk_out_2, clk_out_3,
- blink, xusb_host_src = 252, xusb_falcon_src, xusb_fs_src, xusb_ss_src,
- xusb_dev_src, xusb_dev, xusb_hs_src, sclk, hclk, pclk, cclk_g, cclk_lp,
- dfll_ref = 264, dfll_soc,
-
- /* Mux clocks */
-
- audio0_mux = 300, audio1_mux, audio2_mux, audio3_mux, audio4_mux,
- spdif_mux, clk_out_1_mux, clk_out_2_mux, clk_out_3_mux, dsia_mux,
- dsib_mux, clk_max,
-};
-
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
@@ -934,122 +658,11 @@
/* peripheral mux definitions */
-#define MUX_I2S_SPDIF(_id) \
-static const char *mux_pllaout0_##_id##_2x_pllp_clkm[] = { "pll_a_out0", \
- #_id, "pll_p",\
- "clk_m"};
-MUX_I2S_SPDIF(audio0)
-MUX_I2S_SPDIF(audio1)
-MUX_I2S_SPDIF(audio2)
-MUX_I2S_SPDIF(audio3)
-MUX_I2S_SPDIF(audio4)
-MUX_I2S_SPDIF(audio)
-
-#define mux_pllaout0_audio0_2x_pllp_clkm_idx NULL
-#define mux_pllaout0_audio1_2x_pllp_clkm_idx NULL
-#define mux_pllaout0_audio2_2x_pllp_clkm_idx NULL
-#define mux_pllaout0_audio3_2x_pllp_clkm_idx NULL
-#define mux_pllaout0_audio4_2x_pllp_clkm_idx NULL
-#define mux_pllaout0_audio_2x_pllp_clkm_idx NULL
-
-static const char *mux_pllp_pllc_pllm_clkm[] = {
- "pll_p", "pll_c", "pll_m", "clk_m"
-};
-#define mux_pllp_pllc_pllm_clkm_idx NULL
-
-static const char *mux_pllp_pllc_pllm[] = { "pll_p", "pll_c", "pll_m" };
-#define mux_pllp_pllc_pllm_idx NULL
-
-static const char *mux_pllp_pllc_clk32_clkm[] = {
- "pll_p", "pll_c", "clk_32k", "clk_m"
-};
-#define mux_pllp_pllc_clk32_clkm_idx NULL
-
-static const char *mux_plla_pllc_pllp_clkm[] = {
- "pll_a_out0", "pll_c", "pll_p", "clk_m"
-};
-#define mux_plla_pllc_pllp_clkm_idx mux_pllp_pllc_pllm_clkm_idx
-
-static const char *mux_pllp_pllc2_c_c3_pllm_clkm[] = {
- "pll_p", "pll_c2", "pll_c", "pll_c3", "pll_m", "clk_m"
-};
-static u32 mux_pllp_pllc2_c_c3_pllm_clkm_idx[] = {
- [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 4, [5] = 6,
-};
-
-static const char *mux_pllp_clkm[] = {
- "pll_p", "clk_m"
-};
-static u32 mux_pllp_clkm_idx[] = {
- [0] = 0, [1] = 3,
-};
-
-static const char *mux_pllm_pllc2_c_c3_pllp_plla[] = {
- "pll_m", "pll_c2", "pll_c", "pll_c3", "pll_p", "pll_a_out0"
-};
-#define mux_pllm_pllc2_c_c3_pllp_plla_idx mux_pllp_pllc2_c_c3_pllm_clkm_idx
-
-static const char *mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
- "pll_p", "pll_m", "pll_d_out0", "pll_a_out0", "pll_c",
- "pll_d2_out0", "clk_m"
-};
-#define mux_pllp_pllm_plld_plla_pllc_plld2_clkm_idx NULL
-
-static const char *mux_pllm_pllc_pllp_plla[] = {
- "pll_m", "pll_c", "pll_p", "pll_a_out0"
-};
-#define mux_pllm_pllc_pllp_plla_idx mux_pllp_pllc_pllm_clkm_idx
-
-static const char *mux_pllp_pllc_clkm[] = {
- "pll_p", "pll_c", "pll_m"
-};
-static u32 mux_pllp_pllc_clkm_idx[] = {
- [0] = 0, [1] = 1, [2] = 3,
-};
-
-static const char *mux_pllp_pllc_clkm_clk32[] = {
- "pll_p", "pll_c", "clk_m", "clk_32k"
-};
-#define mux_pllp_pllc_clkm_clk32_idx NULL
-
-static const char *mux_plla_clk32_pllp_clkm_plle[] = {
- "pll_a_out0", "clk_32k", "pll_p", "clk_m", "pll_e_out0"
-};
-#define mux_plla_clk32_pllp_clkm_plle_idx NULL
-
-static const char *mux_clkm_pllp_pllc_pllre[] = {
- "clk_m", "pll_p", "pll_c", "pll_re_out"
-};
-static u32 mux_clkm_pllp_pllc_pllre_idx[] = {
- [0] = 0, [1] = 1, [2] = 3, [3] = 5,
-};
-
-static const char *mux_clkm_48M_pllp_480M[] = {
- "clk_m", "pll_u_48M", "pll_p", "pll_u_480M"
-};
-#define mux_clkm_48M_pllp_480M_idx NULL
-
-static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = {
- "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref"
-};
-static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = {
- [0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7,
-};
-
static const char *mux_plld_out0_plld2_out0[] = {
"pll_d_out0", "pll_d2_out0",
};
#define mux_plld_out0_plld2_out0_idx NULL
-static const char *mux_d_audio_clk[] = {
- "pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync",
- "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
-};
-static u32 mux_d_audio_clk_idx[] = {
- [0] = 0, [1] = 0x8000, [2] = 0xc000, [3] = 0xE000, [4] = 0xE001,
- [5] = 0xE002, [6] = 0xE003, [7] = 0xE004, [8] = 0xE005, [9] = 0xE007,
-};
-
static const char *mux_pllmcp_clkm[] = {
"pll_m_out0", "pll_c_out0", "pll_p_out0", "clk_m", "pll_m_ud",
};
@@ -1064,8 +677,253 @@
{ .val = 0, .div = 0 },
};
-static struct clk *clks[clk_max];
-static struct clk_onecell_data clk_data;
+static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
+ [tegra_clk_rtc] = { .dt_id = TEGRA114_CLK_RTC, .present = true },
+ [tegra_clk_timer] = { .dt_id = TEGRA114_CLK_TIMER, .present = true },
+ [tegra_clk_uarta] = { .dt_id = TEGRA114_CLK_UARTA, .present = true },
+ [tegra_clk_uartd] = { .dt_id = TEGRA114_CLK_UARTD, .present = true },
+ [tegra_clk_sdmmc2] = { .dt_id = TEGRA114_CLK_SDMMC2, .present = true },
+ [tegra_clk_i2s1] = { .dt_id = TEGRA114_CLK_I2S1, .present = true },
+ [tegra_clk_i2c1] = { .dt_id = TEGRA114_CLK_I2C1, .present = true },
+ [tegra_clk_ndflash] = { .dt_id = TEGRA114_CLK_NDFLASH, .present = true },
+ [tegra_clk_sdmmc1] = { .dt_id = TEGRA114_CLK_SDMMC1, .present = true },
+ [tegra_clk_sdmmc4] = { .dt_id = TEGRA114_CLK_SDMMC4, .present = true },
+ [tegra_clk_pwm] = { .dt_id = TEGRA114_CLK_PWM, .present = true },
+ [tegra_clk_i2s0] = { .dt_id = TEGRA114_CLK_I2S0, .present = true },
+ [tegra_clk_i2s2] = { .dt_id = TEGRA114_CLK_I2S2, .present = true },
+ [tegra_clk_epp_8] = { .dt_id = TEGRA114_CLK_EPP, .present = true },
+ [tegra_clk_gr2d_8] = { .dt_id = TEGRA114_CLK_GR2D, .present = true },
+ [tegra_clk_usbd] = { .dt_id = TEGRA114_CLK_USBD, .present = true },
+ [tegra_clk_isp] = { .dt_id = TEGRA114_CLK_ISP, .present = true },
+ [tegra_clk_gr3d_8] = { .dt_id = TEGRA114_CLK_GR3D, .present = true },
+ [tegra_clk_disp2] = { .dt_id = TEGRA114_CLK_DISP2, .present = true },
+ [tegra_clk_disp1] = { .dt_id = TEGRA114_CLK_DISP1, .present = true },
+ [tegra_clk_host1x_8] = { .dt_id = TEGRA114_CLK_HOST1X, .present = true },
+ [tegra_clk_vcp] = { .dt_id = TEGRA114_CLK_VCP, .present = true },
+ [tegra_clk_apbdma] = { .dt_id = TEGRA114_CLK_APBDMA, .present = true },
+ [tegra_clk_kbc] = { .dt_id = TEGRA114_CLK_KBC, .present = true },
+ [tegra_clk_kfuse] = { .dt_id = TEGRA114_CLK_KFUSE, .present = true },
+ [tegra_clk_sbc1_8] = { .dt_id = TEGRA114_CLK_SBC1, .present = true },
+ [tegra_clk_nor] = { .dt_id = TEGRA114_CLK_NOR, .present = true },
+ [tegra_clk_sbc2_8] = { .dt_id = TEGRA114_CLK_SBC2, .present = true },
+ [tegra_clk_sbc3_8] = { .dt_id = TEGRA114_CLK_SBC3, .present = true },
+ [tegra_clk_i2c5] = { .dt_id = TEGRA114_CLK_I2C5, .present = true },
+ [tegra_clk_dsia] = { .dt_id = TEGRA114_CLK_DSIA, .present = true },
+ [tegra_clk_mipi] = { .dt_id = TEGRA114_CLK_MIPI, .present = true },
+ [tegra_clk_hdmi] = { .dt_id = TEGRA114_CLK_HDMI, .present = true },
+ [tegra_clk_csi] = { .dt_id = TEGRA114_CLK_CSI, .present = true },
+ [tegra_clk_i2c2] = { .dt_id = TEGRA114_CLK_I2C2, .present = true },
+ [tegra_clk_uartc] = { .dt_id = TEGRA114_CLK_UARTC, .present = true },
+ [tegra_clk_mipi_cal] = { .dt_id = TEGRA114_CLK_MIPI_CAL, .present = true },
+ [tegra_clk_emc] = { .dt_id = TEGRA114_CLK_EMC, .present = true },
+ [tegra_clk_usb2] = { .dt_id = TEGRA114_CLK_USB2, .present = true },
+ [tegra_clk_usb3] = { .dt_id = TEGRA114_CLK_USB3, .present = true },
+ [tegra_clk_vde_8] = { .dt_id = TEGRA114_CLK_VDE, .present = true },
+ [tegra_clk_bsea] = { .dt_id = TEGRA114_CLK_BSEA, .present = true },
+ [tegra_clk_bsev] = { .dt_id = TEGRA114_CLK_BSEV, .present = true },
+ [tegra_clk_i2c3] = { .dt_id = TEGRA114_CLK_I2C3, .present = true },
+ [tegra_clk_sbc4_8] = { .dt_id = TEGRA114_CLK_SBC4, .present = true },
+ [tegra_clk_sdmmc3] = { .dt_id = TEGRA114_CLK_SDMMC3, .present = true },
+ [tegra_clk_owr] = { .dt_id = TEGRA114_CLK_OWR, .present = true },
+ [tegra_clk_csite] = { .dt_id = TEGRA114_CLK_CSITE, .present = true },
+ [tegra_clk_la] = { .dt_id = TEGRA114_CLK_LA, .present = true },
+ [tegra_clk_trace] = { .dt_id = TEGRA114_CLK_TRACE, .present = true },
+ [tegra_clk_soc_therm] = { .dt_id = TEGRA114_CLK_SOC_THERM, .present = true },
+ [tegra_clk_dtv] = { .dt_id = TEGRA114_CLK_DTV, .present = true },
+ [tegra_clk_ndspeed] = { .dt_id = TEGRA114_CLK_NDSPEED, .present = true },
+ [tegra_clk_i2cslow] = { .dt_id = TEGRA114_CLK_I2CSLOW, .present = true },
+ [tegra_clk_dsib] = { .dt_id = TEGRA114_CLK_DSIB, .present = true },
+ [tegra_clk_tsec] = { .dt_id = TEGRA114_CLK_TSEC, .present = true },
+ [tegra_clk_xusb_host] = { .dt_id = TEGRA114_CLK_XUSB_HOST, .present = true },
+ [tegra_clk_msenc] = { .dt_id = TEGRA114_CLK_MSENC, .present = true },
+ [tegra_clk_csus] = { .dt_id = TEGRA114_CLK_CSUS, .present = true },
+ [tegra_clk_mselect] = { .dt_id = TEGRA114_CLK_MSELECT, .present = true },
+ [tegra_clk_tsensor] = { .dt_id = TEGRA114_CLK_TSENSOR, .present = true },
+ [tegra_clk_i2s3] = { .dt_id = TEGRA114_CLK_I2S3, .present = true },
+ [tegra_clk_i2s4] = { .dt_id = TEGRA114_CLK_I2S4, .present = true },
+ [tegra_clk_i2c4] = { .dt_id = TEGRA114_CLK_I2C4, .present = true },
+ [tegra_clk_sbc5_8] = { .dt_id = TEGRA114_CLK_SBC5, .present = true },
+ [tegra_clk_sbc6_8] = { .dt_id = TEGRA114_CLK_SBC6, .present = true },
+ [tegra_clk_d_audio] = { .dt_id = TEGRA114_CLK_D_AUDIO, .present = true },
+ [tegra_clk_apbif] = { .dt_id = TEGRA114_CLK_APBIF, .present = true },
+ [tegra_clk_dam0] = { .dt_id = TEGRA114_CLK_DAM0, .present = true },
+ [tegra_clk_dam1] = { .dt_id = TEGRA114_CLK_DAM1, .present = true },
+ [tegra_clk_dam2] = { .dt_id = TEGRA114_CLK_DAM2, .present = true },
+ [tegra_clk_hda2codec_2x] = { .dt_id = TEGRA114_CLK_HDA2CODEC_2X, .present = true },
+ [tegra_clk_audio0_2x] = { .dt_id = TEGRA114_CLK_AUDIO0_2X, .present = true },
+ [tegra_clk_audio1_2x] = { .dt_id = TEGRA114_CLK_AUDIO1_2X, .present = true },
+ [tegra_clk_audio2_2x] = { .dt_id = TEGRA114_CLK_AUDIO2_2X, .present = true },
+ [tegra_clk_audio3_2x] = { .dt_id = TEGRA114_CLK_AUDIO3_2X, .present = true },
+ [tegra_clk_audio4_2x] = { .dt_id = TEGRA114_CLK_AUDIO4_2X, .present = true },
+ [tegra_clk_spdif_2x] = { .dt_id = TEGRA114_CLK_SPDIF_2X, .present = true },
+ [tegra_clk_actmon] = { .dt_id = TEGRA114_CLK_ACTMON, .present = true },
+ [tegra_clk_extern1] = { .dt_id = TEGRA114_CLK_EXTERN1, .present = true },
+ [tegra_clk_extern2] = { .dt_id = TEGRA114_CLK_EXTERN2, .present = true },
+ [tegra_clk_extern3] = { .dt_id = TEGRA114_CLK_EXTERN3, .present = true },
+ [tegra_clk_hda] = { .dt_id = TEGRA114_CLK_HDA, .present = true },
+ [tegra_clk_se] = { .dt_id = TEGRA114_CLK_SE, .present = true },
+ [tegra_clk_hda2hdmi] = { .dt_id = TEGRA114_CLK_HDA2HDMI, .present = true },
+ [tegra_clk_cilab] = { .dt_id = TEGRA114_CLK_CILAB, .present = true },
+ [tegra_clk_cilcd] = { .dt_id = TEGRA114_CLK_CILCD, .present = true },
+ [tegra_clk_cile] = { .dt_id = TEGRA114_CLK_CILE, .present = true },
+ [tegra_clk_dsialp] = { .dt_id = TEGRA114_CLK_DSIALP, .present = true },
+ [tegra_clk_dsiblp] = { .dt_id = TEGRA114_CLK_DSIBLP, .present = true },
+ [tegra_clk_dds] = { .dt_id = TEGRA114_CLK_DDS, .present = true },
+ [tegra_clk_dp2] = { .dt_id = TEGRA114_CLK_DP2, .present = true },
+ [tegra_clk_amx] = { .dt_id = TEGRA114_CLK_AMX, .present = true },
+ [tegra_clk_adx] = { .dt_id = TEGRA114_CLK_ADX, .present = true },
+ [tegra_clk_xusb_ss] = { .dt_id = TEGRA114_CLK_XUSB_SS, .present = true },
+ [tegra_clk_uartb] = { .dt_id = TEGRA114_CLK_UARTB, .present = true },
+ [tegra_clk_vfir] = { .dt_id = TEGRA114_CLK_VFIR, .present = true },
+ [tegra_clk_spdif_in] = { .dt_id = TEGRA114_CLK_SPDIF_IN, .present = true },
+ [tegra_clk_spdif_out] = { .dt_id = TEGRA114_CLK_SPDIF_OUT, .present = true },
+ [tegra_clk_vi_8] = { .dt_id = TEGRA114_CLK_VI, .present = true },
+ [tegra_clk_vi_sensor_8] = { .dt_id = TEGRA114_CLK_VI_SENSOR, .present = true },
+ [tegra_clk_fuse] = { .dt_id = TEGRA114_CLK_FUSE, .present = true },
+ [tegra_clk_fuse_burn] = { .dt_id = TEGRA114_CLK_FUSE_BURN, .present = true },
+ [tegra_clk_clk_32k] = { .dt_id = TEGRA114_CLK_CLK_32K, .present = true },
+ [tegra_clk_clk_m] = { .dt_id = TEGRA114_CLK_CLK_M, .present = true },
+ [tegra_clk_clk_m_div2] = { .dt_id = TEGRA114_CLK_CLK_M_DIV2, .present = true },
+ [tegra_clk_clk_m_div4] = { .dt_id = TEGRA114_CLK_CLK_M_DIV4, .present = true },
+ [tegra_clk_pll_ref] = { .dt_id = TEGRA114_CLK_PLL_REF, .present = true },
+ [tegra_clk_pll_c] = { .dt_id = TEGRA114_CLK_PLL_C, .present = true },
+ [tegra_clk_pll_c_out1] = { .dt_id = TEGRA114_CLK_PLL_C_OUT1, .present = true },
+ [tegra_clk_pll_c2] = { .dt_id = TEGRA114_CLK_PLL_C2, .present = true },
+ [tegra_clk_pll_c3] = { .dt_id = TEGRA114_CLK_PLL_C3, .present = true },
+ [tegra_clk_pll_m] = { .dt_id = TEGRA114_CLK_PLL_M, .present = true },
+ [tegra_clk_pll_m_out1] = { .dt_id = TEGRA114_CLK_PLL_M_OUT1, .present = true },
+ [tegra_clk_pll_p] = { .dt_id = TEGRA114_CLK_PLL_P, .present = true },
+ [tegra_clk_pll_p_out1] = { .dt_id = TEGRA114_CLK_PLL_P_OUT1, .present = true },
+ [tegra_clk_pll_p_out2_int] = { .dt_id = TEGRA114_CLK_PLL_P_OUT2, .present = true },
+ [tegra_clk_pll_p_out3] = { .dt_id = TEGRA114_CLK_PLL_P_OUT3, .present = true },
+ [tegra_clk_pll_p_out4] = { .dt_id = TEGRA114_CLK_PLL_P_OUT4, .present = true },
+ [tegra_clk_pll_a] = { .dt_id = TEGRA114_CLK_PLL_A, .present = true },
+ [tegra_clk_pll_a_out0] = { .dt_id = TEGRA114_CLK_PLL_A_OUT0, .present = true },
+ [tegra_clk_pll_d] = { .dt_id = TEGRA114_CLK_PLL_D, .present = true },
+ [tegra_clk_pll_d_out0] = { .dt_id = TEGRA114_CLK_PLL_D_OUT0, .present = true },
+ [tegra_clk_pll_d2] = { .dt_id = TEGRA114_CLK_PLL_D2, .present = true },
+ [tegra_clk_pll_d2_out0] = { .dt_id = TEGRA114_CLK_PLL_D2_OUT0, .present = true },
+ [tegra_clk_pll_u] = { .dt_id = TEGRA114_CLK_PLL_U, .present = true },
+ [tegra_clk_pll_u_480m] = { .dt_id = TEGRA114_CLK_PLL_U_480M, .present = true },
+ [tegra_clk_pll_u_60m] = { .dt_id = TEGRA114_CLK_PLL_U_60M, .present = true },
+ [tegra_clk_pll_u_48m] = { .dt_id = TEGRA114_CLK_PLL_U_48M, .present = true },
+ [tegra_clk_pll_u_12m] = { .dt_id = TEGRA114_CLK_PLL_U_12M, .present = true },
+ [tegra_clk_pll_x] = { .dt_id = TEGRA114_CLK_PLL_X, .present = true },
+ [tegra_clk_pll_x_out0] = { .dt_id = TEGRA114_CLK_PLL_X_OUT0, .present = true },
+ [tegra_clk_pll_re_vco] = { .dt_id = TEGRA114_CLK_PLL_RE_VCO, .present = true },
+ [tegra_clk_pll_re_out] = { .dt_id = TEGRA114_CLK_PLL_RE_OUT, .present = true },
+ [tegra_clk_pll_e_out0] = { .dt_id = TEGRA114_CLK_PLL_E_OUT0, .present = true },
+ [tegra_clk_spdif_in_sync] = { .dt_id = TEGRA114_CLK_SPDIF_IN_SYNC, .present = true },
+ [tegra_clk_i2s0_sync] = { .dt_id = TEGRA114_CLK_I2S0_SYNC, .present = true },
+ [tegra_clk_i2s1_sync] = { .dt_id = TEGRA114_CLK_I2S1_SYNC, .present = true },
+ [tegra_clk_i2s2_sync] = { .dt_id = TEGRA114_CLK_I2S2_SYNC, .present = true },
+ [tegra_clk_i2s3_sync] = { .dt_id = TEGRA114_CLK_I2S3_SYNC, .present = true },
+ [tegra_clk_i2s4_sync] = { .dt_id = TEGRA114_CLK_I2S4_SYNC, .present = true },
+ [tegra_clk_vimclk_sync] = { .dt_id = TEGRA114_CLK_VIMCLK_SYNC, .present = true },
+ [tegra_clk_audio0] = { .dt_id = TEGRA114_CLK_AUDIO0, .present = true },
+ [tegra_clk_audio1] = { .dt_id = TEGRA114_CLK_AUDIO1, .present = true },
+ [tegra_clk_audio2] = { .dt_id = TEGRA114_CLK_AUDIO2, .present = true },
+ [tegra_clk_audio3] = { .dt_id = TEGRA114_CLK_AUDIO3, .present = true },
+ [tegra_clk_audio4] = { .dt_id = TEGRA114_CLK_AUDIO4, .present = true },
+ [tegra_clk_spdif] = { .dt_id = TEGRA114_CLK_SPDIF, .present = true },
+ [tegra_clk_clk_out_1] = { .dt_id = TEGRA114_CLK_CLK_OUT_1, .present = true },
+ [tegra_clk_clk_out_2] = { .dt_id = TEGRA114_CLK_CLK_OUT_2, .present = true },
+ [tegra_clk_clk_out_3] = { .dt_id = TEGRA114_CLK_CLK_OUT_3, .present = true },
+ [tegra_clk_blink] = { .dt_id = TEGRA114_CLK_BLINK, .present = true },
+ [tegra_clk_xusb_host_src] = { .dt_id = TEGRA114_CLK_XUSB_HOST_SRC, .present = true },
+ [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true },
+ [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true },
+ [tegra_clk_xusb_ss_src] = { .dt_id = TEGRA114_CLK_XUSB_SS_SRC, .present = true },
+ [tegra_clk_xusb_dev_src] = { .dt_id = TEGRA114_CLK_XUSB_DEV_SRC, .present = true },
+ [tegra_clk_xusb_dev] = { .dt_id = TEGRA114_CLK_XUSB_DEV, .present = true },
+ [tegra_clk_xusb_hs_src] = { .dt_id = TEGRA114_CLK_XUSB_HS_SRC, .present = true },
+ [tegra_clk_sclk] = { .dt_id = TEGRA114_CLK_SCLK, .present = true },
+ [tegra_clk_hclk] = { .dt_id = TEGRA114_CLK_HCLK, .present = true },
+ [tegra_clk_pclk] = { .dt_id = TEGRA114_CLK_PCLK, .present = true },
+ [tegra_clk_cclk_g] = { .dt_id = TEGRA114_CLK_CCLK_G, .present = true },
+ [tegra_clk_cclk_lp] = { .dt_id = TEGRA114_CLK_CCLK_LP, .present = true },
+ [tegra_clk_dfll_ref] = { .dt_id = TEGRA114_CLK_DFLL_REF, .present = true },
+ [tegra_clk_dfll_soc] = { .dt_id = TEGRA114_CLK_DFLL_SOC, .present = true },
+ [tegra_clk_audio0_mux] = { .dt_id = TEGRA114_CLK_AUDIO0_MUX, .present = true },
+ [tegra_clk_audio1_mux] = { .dt_id = TEGRA114_CLK_AUDIO1_MUX, .present = true },
+ [tegra_clk_audio2_mux] = { .dt_id = TEGRA114_CLK_AUDIO2_MUX, .present = true },
+ [tegra_clk_audio3_mux] = { .dt_id = TEGRA114_CLK_AUDIO3_MUX, .present = true },
+ [tegra_clk_audio4_mux] = { .dt_id = TEGRA114_CLK_AUDIO4_MUX, .present = true },
+ [tegra_clk_spdif_mux] = { .dt_id = TEGRA114_CLK_SPDIF_MUX, .present = true },
+ [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_1_MUX, .present = true },
+ [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_2_MUX, .present = true },
+ [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_3_MUX, .present = true },
+ [tegra_clk_dsia_mux] = { .dt_id = TEGRA114_CLK_DSIA_MUX, .present = true },
+ [tegra_clk_dsib_mux] = { .dt_id = TEGRA114_CLK_DSIB_MUX, .present = true },
+};
+
+static struct tegra_devclk devclks[] __initdata = {
+ { .con_id = "clk_m", .dt_id = TEGRA114_CLK_CLK_M },
+ { .con_id = "pll_ref", .dt_id = TEGRA114_CLK_PLL_REF },
+ { .con_id = "clk_32k", .dt_id = TEGRA114_CLK_CLK_32K },
+ { .con_id = "clk_m_div2", .dt_id = TEGRA114_CLK_CLK_M_DIV2 },
+ { .con_id = "clk_m_div4", .dt_id = TEGRA114_CLK_CLK_M_DIV4 },
+ { .con_id = "pll_c", .dt_id = TEGRA114_CLK_PLL_C },
+ { .con_id = "pll_c_out1", .dt_id = TEGRA114_CLK_PLL_C_OUT1 },
+ { .con_id = "pll_c2", .dt_id = TEGRA114_CLK_PLL_C2 },
+ { .con_id = "pll_c3", .dt_id = TEGRA114_CLK_PLL_C3 },
+ { .con_id = "pll_p", .dt_id = TEGRA114_CLK_PLL_P },
+ { .con_id = "pll_p_out1", .dt_id = TEGRA114_CLK_PLL_P_OUT1 },
+ { .con_id = "pll_p_out2", .dt_id = TEGRA114_CLK_PLL_P_OUT2 },
+ { .con_id = "pll_p_out3", .dt_id = TEGRA114_CLK_PLL_P_OUT3 },
+ { .con_id = "pll_p_out4", .dt_id = TEGRA114_CLK_PLL_P_OUT4 },
+ { .con_id = "pll_m", .dt_id = TEGRA114_CLK_PLL_M },
+ { .con_id = "pll_m_out1", .dt_id = TEGRA114_CLK_PLL_M_OUT1 },
+ { .con_id = "pll_x", .dt_id = TEGRA114_CLK_PLL_X },
+ { .con_id = "pll_x_out0", .dt_id = TEGRA114_CLK_PLL_X_OUT0 },
+ { .con_id = "pll_u", .dt_id = TEGRA114_CLK_PLL_U },
+ { .con_id = "pll_u_480M", .dt_id = TEGRA114_CLK_PLL_U_480M },
+ { .con_id = "pll_u_60M", .dt_id = TEGRA114_CLK_PLL_U_60M },
+ { .con_id = "pll_u_48M", .dt_id = TEGRA114_CLK_PLL_U_48M },
+ { .con_id = "pll_u_12M", .dt_id = TEGRA114_CLK_PLL_U_12M },
+ { .con_id = "pll_d", .dt_id = TEGRA114_CLK_PLL_D },
+ { .con_id = "pll_d_out0", .dt_id = TEGRA114_CLK_PLL_D_OUT0 },
+ { .con_id = "pll_d2", .dt_id = TEGRA114_CLK_PLL_D2 },
+ { .con_id = "pll_d2_out0", .dt_id = TEGRA114_CLK_PLL_D2_OUT0 },
+ { .con_id = "pll_a", .dt_id = TEGRA114_CLK_PLL_A },
+ { .con_id = "pll_a_out0", .dt_id = TEGRA114_CLK_PLL_A_OUT0 },
+ { .con_id = "pll_re_vco", .dt_id = TEGRA114_CLK_PLL_RE_VCO },
+ { .con_id = "pll_re_out", .dt_id = TEGRA114_CLK_PLL_RE_OUT },
+ { .con_id = "pll_e_out0", .dt_id = TEGRA114_CLK_PLL_E_OUT0 },
+ { .con_id = "spdif_in_sync", .dt_id = TEGRA114_CLK_SPDIF_IN_SYNC },
+ { .con_id = "i2s0_sync", .dt_id = TEGRA114_CLK_I2S0_SYNC },
+ { .con_id = "i2s1_sync", .dt_id = TEGRA114_CLK_I2S1_SYNC },
+ { .con_id = "i2s2_sync", .dt_id = TEGRA114_CLK_I2S2_SYNC },
+ { .con_id = "i2s3_sync", .dt_id = TEGRA114_CLK_I2S3_SYNC },
+ { .con_id = "i2s4_sync", .dt_id = TEGRA114_CLK_I2S4_SYNC },
+ { .con_id = "vimclk_sync", .dt_id = TEGRA114_CLK_VIMCLK_SYNC },
+ { .con_id = "audio0", .dt_id = TEGRA114_CLK_AUDIO0 },
+ { .con_id = "audio1", .dt_id = TEGRA114_CLK_AUDIO1 },
+ { .con_id = "audio2", .dt_id = TEGRA114_CLK_AUDIO2 },
+ { .con_id = "audio3", .dt_id = TEGRA114_CLK_AUDIO3 },
+ { .con_id = "audio4", .dt_id = TEGRA114_CLK_AUDIO4 },
+ { .con_id = "spdif", .dt_id = TEGRA114_CLK_SPDIF },
+ { .con_id = "audio0_2x", .dt_id = TEGRA114_CLK_AUDIO0_2X },
+ { .con_id = "audio1_2x", .dt_id = TEGRA114_CLK_AUDIO1_2X },
+ { .con_id = "audio2_2x", .dt_id = TEGRA114_CLK_AUDIO2_2X },
+ { .con_id = "audio3_2x", .dt_id = TEGRA114_CLK_AUDIO3_2X },
+ { .con_id = "audio4_2x", .dt_id = TEGRA114_CLK_AUDIO4_2X },
+ { .con_id = "spdif_2x", .dt_id = TEGRA114_CLK_SPDIF_2X },
+ { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA114_CLK_EXTERN1 },
+ { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA114_CLK_EXTERN2 },
+ { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA114_CLK_EXTERN3 },
+ { .con_id = "blink", .dt_id = TEGRA114_CLK_BLINK },
+ { .con_id = "cclk_g", .dt_id = TEGRA114_CLK_CCLK_G },
+ { .con_id = "cclk_lp", .dt_id = TEGRA114_CLK_CCLK_LP },
+ { .con_id = "sclk", .dt_id = TEGRA114_CLK_SCLK },
+ { .con_id = "hclk", .dt_id = TEGRA114_CLK_HCLK },
+ { .con_id = "pclk", .dt_id = TEGRA114_CLK_PCLK },
+ { .con_id = "fuse", .dt_id = TEGRA114_CLK_FUSE },
+ { .dev_id = "rtc-tegra", .dt_id = TEGRA114_CLK_RTC },
+ { .dev_id = "timer", .dt_id = TEGRA114_CLK_TIMER },
+};
+
+static struct clk **clks;
static unsigned long osc_freq;
static unsigned long pll_ref_freq;
@@ -1086,16 +944,14 @@
/* clk_m */
clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT,
osc_freq);
- clk_register_clkdev(clk, "clk_m", NULL);
- clks[clk_m] = clk;
+ clks[TEGRA114_CLK_CLK_M] = clk;
/* pll_ref */
val = (val >> OSC_CTRL_PLL_REF_DIV_SHIFT) & 3;
pll_ref_div = 1 << val;
clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
CLK_SET_RATE_PARENT, 1, pll_ref_div);
- clk_register_clkdev(clk, "pll_ref", NULL);
- clks[pll_ref] = clk;
+ clks[TEGRA114_CLK_PLL_REF] = clk;
pll_ref_freq = osc_freq / pll_ref_div;
@@ -1109,20 +965,17 @@
/* clk_32k */
clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT,
32768);
- clk_register_clkdev(clk, "clk_32k", NULL);
- clks[clk_32k] = clk;
+ clks[TEGRA114_CLK_CLK_32K] = clk;
/* clk_m_div2 */
clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "clk_m_div2", NULL);
- clks[clk_m_div2] = clk;
+ clks[TEGRA114_CLK_CLK_M_DIV2] = clk;
/* clk_m_div4 */
clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
CLK_SET_RATE_PARENT, 1, 4);
- clk_register_clkdev(clk, "clk_m_div4", NULL);
- clks[clk_m_div4] = clk;
+ clks[TEGRA114_CLK_CLK_M_DIV4] = clk;
}
@@ -1208,63 +1061,6 @@
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
}
-static void __init _clip_vco_min(struct tegra_clk_pll_params *pll_params)
-{
- pll_params->vco_min =
- DIV_ROUND_UP(pll_params->vco_min, pll_ref_freq) * pll_ref_freq;
-}
-
-static int __init _setup_dynamic_ramp(struct tegra_clk_pll_params *pll_params,
- void __iomem *clk_base)
-{
- u32 val;
- u32 step_a, step_b;
-
- switch (pll_ref_freq) {
- case 12000000:
- case 13000000:
- case 26000000:
- step_a = 0x2B;
- step_b = 0x0B;
- break;
- case 16800000:
- step_a = 0x1A;
- step_b = 0x09;
- break;
- case 19200000:
- step_a = 0x12;
- step_b = 0x08;
- break;
- default:
- pr_err("%s: Unexpected reference rate %lu\n",
- __func__, pll_ref_freq);
- WARN_ON(1);
- return -EINVAL;
- }
-
- val = step_a << pll_params->stepa_shift;
- val |= step_b << pll_params->stepb_shift;
- writel_relaxed(val, clk_base + pll_params->dyn_ramp_reg);
-
- return 0;
-}
-
-static void __init _init_iddq(struct tegra_clk_pll_params *pll_params,
- void __iomem *clk_base)
-{
- u32 val, val_iddq;
-
- val = readl_relaxed(clk_base + pll_params->base_reg);
- val_iddq = readl_relaxed(clk_base + pll_params->iddq_reg);
-
- if (val & BIT(30))
- WARN_ON(val_iddq & BIT(pll_params->iddq_bit_idx));
- else {
- val_iddq |= BIT(pll_params->iddq_bit_idx);
- writel_relaxed(val_iddq, clk_base + pll_params->iddq_reg);
- }
-}
-
static void __init tegra114_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
@@ -1272,104 +1068,34 @@
struct clk *clk;
/* PLLC */
- _clip_vco_min(&pll_c_params);
- if (_setup_dynamic_ramp(&pll_c_params, clk_base) >= 0) {
- _init_iddq(&pll_c_params, clk_base);
- clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base,
- pmc, 0, 0, &pll_c_params, TEGRA_PLL_USE_LOCK,
- pll_c_freq_table, NULL);
- clk_register_clkdev(clk, "pll_c", NULL);
- clks[pll_c] = clk;
+ clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base,
+ pmc, 0, &pll_c_params, NULL);
+ clks[TEGRA114_CLK_PLL_C] = clk;
- /* PLLC_OUT1 */
- clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
- clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
- 8, 8, 1, NULL);
- clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
- clk_base + PLLC_OUT, 1, 0,
- CLK_SET_RATE_PARENT, 0, NULL);
- clk_register_clkdev(clk, "pll_c_out1", NULL);
- clks[pll_c_out1] = clk;
- }
+ /* PLLC_OUT1 */
+ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
+ clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
+ clk_base + PLLC_OUT, 1, 0,
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clks[TEGRA114_CLK_PLL_C_OUT1] = clk;
/* PLLC2 */
- _clip_vco_min(&pll_c2_params);
- clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, 0,
- &pll_c2_params, TEGRA_PLL_USE_LOCK,
- pll_cx_freq_table, NULL);
- clk_register_clkdev(clk, "pll_c2", NULL);
- clks[pll_c2] = clk;
+ clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0,
+ &pll_c2_params, NULL);
+ clks[TEGRA114_CLK_PLL_C2] = clk;
/* PLLC3 */
- _clip_vco_min(&pll_c3_params);
- clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0, 0,
- &pll_c3_params, TEGRA_PLL_USE_LOCK,
- pll_cx_freq_table, NULL);
- clk_register_clkdev(clk, "pll_c3", NULL);
- clks[pll_c3] = clk;
-
- /* PLLP */
- clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, pmc, 0,
- 408000000, &pll_p_params,
- TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK,
- pll_p_freq_table, NULL);
- clk_register_clkdev(clk, "pll_p", NULL);
- clks[pll_p] = clk;
-
- /* PLLP_OUT1 */
- clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p",
- clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div",
- clk_base + PLLP_OUTA, 1, 0,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out1", NULL);
- clks[pll_p_out1] = clk;
-
- /* PLLP_OUT2 */
- clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p",
- clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP | TEGRA_DIVIDER_INT, 24,
- 8, 1, &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div",
- clk_base + PLLP_OUTA, 17, 16,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out2", NULL);
- clks[pll_p_out2] = clk;
-
- /* PLLP_OUT3 */
- clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p",
- clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP, 8, 8, 1, &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div",
- clk_base + PLLP_OUTB, 1, 0,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out3", NULL);
- clks[pll_p_out3] = clk;
-
- /* PLLP_OUT4 */
- clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p",
- clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
- &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div",
- clk_base + PLLP_OUTB, 17, 16,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out4", NULL);
- clks[pll_p_out4] = clk;
+ clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0,
+ &pll_c3_params, NULL);
+ clks[TEGRA114_CLK_PLL_C3] = clk;
/* PLLM */
- _clip_vco_min(&pll_m_params);
clk = tegra_clk_register_pllm("pll_m", "pll_ref", clk_base, pmc,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0,
- &pll_m_params, TEGRA_PLL_USE_LOCK,
- pll_m_freq_table, NULL);
- clk_register_clkdev(clk, "pll_m", NULL);
- clks[pll_m] = clk;
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+ &pll_m_params, NULL);
+ clks[TEGRA114_CLK_PLL_M] = clk;
/* PLLM_OUT1 */
clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
@@ -1378,41 +1104,20 @@
clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
CLK_SET_RATE_PARENT, 0, NULL);
- clk_register_clkdev(clk, "pll_m_out1", NULL);
- clks[pll_m_out1] = clk;
+ clks[TEGRA114_CLK_PLL_M_OUT1] = clk;
/* PLLM_UD */
clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m",
CLK_SET_RATE_PARENT, 1, 1);
- /* PLLX */
- _clip_vco_min(&pll_x_params);
- if (_setup_dynamic_ramp(&pll_x_params, clk_base) >= 0) {
- _init_iddq(&pll_x_params, clk_base);
- clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
- pmc, CLK_IGNORE_UNUSED, 0, &pll_x_params,
- TEGRA_PLL_USE_LOCK, pll_x_freq_table, NULL);
- clk_register_clkdev(clk, "pll_x", NULL);
- clks[pll_x] = clk;
- }
-
- /* PLLX_OUT0 */
- clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
- CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "pll_x_out0", NULL);
- clks[pll_x_out0] = clk;
-
/* PLLU */
val = readl(clk_base + pll_u_params.base_reg);
val &= ~BIT(24); /* disable PLLU_OVERRIDE */
writel(val, clk_base + pll_u_params.base_reg);
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
- 0, &pll_u_params, TEGRA_PLLU |
- TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
- TEGRA_PLL_USE_LOCK, pll_u_freq_table, &pll_u_lock);
- clk_register_clkdev(clk, "pll_u", NULL);
- clks[pll_u] = clk;
+ &pll_u_params, &pll_u_lock);
+ clks[TEGRA114_CLK_PLL_U] = clk;
tegra114_utmi_param_configure(clk_base);
@@ -1420,678 +1125,65 @@
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
22, 0, &pll_u_lock);
- clk_register_clkdev(clk, "pll_u_480M", NULL);
- clks[pll_u_480M] = clk;
+ clks[TEGRA114_CLK_PLL_U_480M] = clk;
/* PLLU_60M */
clk = clk_register_fixed_factor(NULL, "pll_u_60M", "pll_u",
CLK_SET_RATE_PARENT, 1, 8);
- clk_register_clkdev(clk, "pll_u_60M", NULL);
- clks[pll_u_60M] = clk;
+ clks[TEGRA114_CLK_PLL_U_60M] = clk;
/* PLLU_48M */
clk = clk_register_fixed_factor(NULL, "pll_u_48M", "pll_u",
CLK_SET_RATE_PARENT, 1, 10);
- clk_register_clkdev(clk, "pll_u_48M", NULL);
- clks[pll_u_48M] = clk;
+ clks[TEGRA114_CLK_PLL_U_48M] = clk;
/* PLLU_12M */
clk = clk_register_fixed_factor(NULL, "pll_u_12M", "pll_u",
CLK_SET_RATE_PARENT, 1, 40);
- clk_register_clkdev(clk, "pll_u_12M", NULL);
- clks[pll_u_12M] = clk;
+ clks[TEGRA114_CLK_PLL_U_12M] = clk;
/* PLLD */
clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0,
- 0, &pll_d_params,
- TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
- TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d_lock);
- clk_register_clkdev(clk, "pll_d", NULL);
- clks[pll_d] = clk;
+ &pll_d_params, &pll_d_lock);
+ clks[TEGRA114_CLK_PLL_D] = clk;
/* PLLD_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "pll_d_out0", NULL);
- clks[pll_d_out0] = clk;
+ clks[TEGRA114_CLK_PLL_D_OUT0] = clk;
/* PLLD2 */
clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc, 0,
- 0, &pll_d2_params,
- TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
- TEGRA_PLL_USE_LOCK, pll_d_freq_table, &pll_d2_lock);
- clk_register_clkdev(clk, "pll_d2", NULL);
- clks[pll_d2] = clk;
+ &pll_d2_params, &pll_d2_lock);
+ clks[TEGRA114_CLK_PLL_D2] = clk;
/* PLLD2_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "pll_d2_out0", NULL);
- clks[pll_d2_out0] = clk;
-
- /* PLLA */
- clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, pmc, 0,
- 0, &pll_a_params, TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_USE_LOCK, pll_a_freq_table, NULL);
- clk_register_clkdev(clk, "pll_a", NULL);
- clks[pll_a] = clk;
-
- /* PLLA_OUT0 */
- clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
- clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
- 8, 8, 1, NULL);
- clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
- clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
- CLK_SET_RATE_PARENT, 0, NULL);
- clk_register_clkdev(clk, "pll_a_out0", NULL);
- clks[pll_a_out0] = clk;
+ clks[TEGRA114_CLK_PLL_D2_OUT0] = clk;
/* PLLRE */
- _clip_vco_min(&pll_re_vco_params);
clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc,
- 0, 0, &pll_re_vco_params, TEGRA_PLL_USE_LOCK,
- NULL, &pll_re_lock, pll_ref_freq);
- clk_register_clkdev(clk, "pll_re_vco", NULL);
- clks[pll_re_vco] = clk;
+ 0, &pll_re_vco_params, &pll_re_lock, pll_ref_freq);
+ clks[TEGRA114_CLK_PLL_RE_VCO] = clk;
clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0,
clk_base + PLLRE_BASE, 16, 4, 0,
pll_re_div_table, &pll_re_lock);
- clk_register_clkdev(clk, "pll_re_out", NULL);
- clks[pll_re_out] = clk;
+ clks[TEGRA114_CLK_PLL_RE_OUT] = clk;
/* PLLE */
- clk = tegra_clk_register_plle_tegra114("pll_e_out0", "pll_re_vco",
- clk_base, 0, 100000000, &pll_e_params,
- pll_e_freq_table, NULL);
- clk_register_clkdev(clk, "pll_e_out0", NULL);
- clks[pll_e_out0] = clk;
+ clk = tegra_clk_register_plle_tegra114("pll_e_out0", "pll_ref",
+ clk_base, 0, &pll_e_params, NULL);
+ clks[TEGRA114_CLK_PLL_E_OUT0] = clk;
}
-static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync",
- "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
-};
-
-static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
- "clk_m_div4", "extern1",
-};
-
-static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
- "clk_m_div4", "extern2",
-};
-
-static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
- "clk_m_div4", "extern3",
-};
-
-static void __init tegra114_audio_clk_init(void __iomem *clk_base)
+static __init void tegra114_periph_clk_init(void __iomem *clk_base,
+ void __iomem *pmc_base)
{
struct clk *clk;
-
- /* spdif_in_sync */
- clk = tegra_clk_register_sync_source("spdif_in_sync", 24000000,
- 24000000);
- clk_register_clkdev(clk, "spdif_in_sync", NULL);
- clks[spdif_in_sync] = clk;
-
- /* i2s0_sync */
- clk = tegra_clk_register_sync_source("i2s0_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s0_sync", NULL);
- clks[i2s0_sync] = clk;
-
- /* i2s1_sync */
- clk = tegra_clk_register_sync_source("i2s1_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s1_sync", NULL);
- clks[i2s1_sync] = clk;
-
- /* i2s2_sync */
- clk = tegra_clk_register_sync_source("i2s2_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s2_sync", NULL);
- clks[i2s2_sync] = clk;
-
- /* i2s3_sync */
- clk = tegra_clk_register_sync_source("i2s3_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s3_sync", NULL);
- clks[i2s3_sync] = clk;
-
- /* i2s4_sync */
- clk = tegra_clk_register_sync_source("i2s4_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s4_sync", NULL);
- clks[i2s4_sync] = clk;
-
- /* vimclk_sync */
- clk = tegra_clk_register_sync_source("vimclk_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "vimclk_sync", NULL);
- clks[vimclk_sync] = clk;
-
- /* audio0 */
- clk = clk_register_mux(NULL, "audio0_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S0, 0, 3, 0,
- NULL);
- clks[audio0_mux] = clk;
- clk = clk_register_gate(NULL, "audio0", "audio0_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S0, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio0", NULL);
- clks[audio0] = clk;
-
- /* audio1 */
- clk = clk_register_mux(NULL, "audio1_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S1, 0, 3, 0,
- NULL);
- clks[audio1_mux] = clk;
- clk = clk_register_gate(NULL, "audio1", "audio1_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S1, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio1", NULL);
- clks[audio1] = clk;
-
- /* audio2 */
- clk = clk_register_mux(NULL, "audio2_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S2, 0, 3, 0,
- NULL);
- clks[audio2_mux] = clk;
- clk = clk_register_gate(NULL, "audio2", "audio2_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S2, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio2", NULL);
- clks[audio2] = clk;
-
- /* audio3 */
- clk = clk_register_mux(NULL, "audio3_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S3, 0, 3, 0,
- NULL);
- clks[audio3_mux] = clk;
- clk = clk_register_gate(NULL, "audio3", "audio3_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S3, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio3", NULL);
- clks[audio3] = clk;
-
- /* audio4 */
- clk = clk_register_mux(NULL, "audio4_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S4, 0, 3, 0,
- NULL);
- clks[audio4_mux] = clk;
- clk = clk_register_gate(NULL, "audio4", "audio4_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S4, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio4", NULL);
- clks[audio4] = clk;
-
- /* spdif */
- clk = clk_register_mux(NULL, "spdif_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_SPDIF, 0, 3, 0,
- NULL);
- clks[spdif_mux] = clk;
- clk = clk_register_gate(NULL, "spdif", "spdif_mux", 0,
- clk_base + AUDIO_SYNC_CLK_SPDIF, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "spdif", NULL);
- clks[spdif] = clk;
-
- /* audio0_2x */
- clk = clk_register_fixed_factor(NULL, "audio0_doubler", "audio0",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio0_div", "audio0_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 24, 1,
- 0, &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio0_2x", "audio0_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 113, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio0_2x", NULL);
- clks[audio0_2x] = clk;
-
- /* audio1_2x */
- clk = clk_register_fixed_factor(NULL, "audio1_doubler", "audio1",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio1_div", "audio1_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 25, 1,
- 0, &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio1_2x", "audio1_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 114, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio1_2x", NULL);
- clks[audio1_2x] = clk;
-
- /* audio2_2x */
- clk = clk_register_fixed_factor(NULL, "audio2_doubler", "audio2",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio2_div", "audio2_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 26, 1,
- 0, &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio2_2x", "audio2_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 115, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio2_2x", NULL);
- clks[audio2_2x] = clk;
-
- /* audio3_2x */
- clk = clk_register_fixed_factor(NULL, "audio3_doubler", "audio3",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio3_div", "audio3_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 27, 1,
- 0, &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio3_2x", "audio3_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 116, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio3_2x", NULL);
- clks[audio3_2x] = clk;
-
- /* audio4_2x */
- clk = clk_register_fixed_factor(NULL, "audio4_doubler", "audio4",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio4_div", "audio4_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 28, 1,
- 0, &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio4_2x", "audio4_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 117, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio4_2x", NULL);
- clks[audio4_2x] = clk;
-
- /* spdif_2x */
- clk = clk_register_fixed_factor(NULL, "spdif_doubler", "spdif",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("spdif_div", "spdif_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 29, 1,
- 0, &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("spdif_2x", "spdif_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 118,
- &periph_v_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "spdif_2x", NULL);
- clks[spdif_2x] = clk;
-}
-
-static void __init tegra114_pmc_clk_init(void __iomem *pmc_base)
-{
- struct clk *clk;
-
- /* clk_out_1 */
- clk = clk_register_mux(NULL, "clk_out_1_mux", clk_out1_parents,
- ARRAY_SIZE(clk_out1_parents),
- CLK_SET_RATE_NO_REPARENT,
- pmc_base + PMC_CLK_OUT_CNTRL, 6, 3, 0,
- &clk_out_lock);
- clks[clk_out_1_mux] = clk;
- clk = clk_register_gate(NULL, "clk_out_1", "clk_out_1_mux", 0,
- pmc_base + PMC_CLK_OUT_CNTRL, 2, 0,
- &clk_out_lock);
- clk_register_clkdev(clk, "extern1", "clk_out_1");
- clks[clk_out_1] = clk;
-
- /* clk_out_2 */
- clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents,
- ARRAY_SIZE(clk_out2_parents),
- CLK_SET_RATE_NO_REPARENT,
- pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0,
- &clk_out_lock);
- clks[clk_out_2_mux] = clk;
- clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0,
- pmc_base + PMC_CLK_OUT_CNTRL, 10, 0,
- &clk_out_lock);
- clk_register_clkdev(clk, "extern2", "clk_out_2");
- clks[clk_out_2] = clk;
-
- /* clk_out_3 */
- clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents,
- ARRAY_SIZE(clk_out3_parents),
- CLK_SET_RATE_NO_REPARENT,
- pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0,
- &clk_out_lock);
- clks[clk_out_3_mux] = clk;
- clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0,
- pmc_base + PMC_CLK_OUT_CNTRL, 18, 0,
- &clk_out_lock);
- clk_register_clkdev(clk, "extern3", "clk_out_3");
- clks[clk_out_3] = clk;
-
- /* blink */
- /* clear the blink timer register to directly output clk_32k */
- writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
- clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
- pmc_base + PMC_DPD_PADS_ORIDE,
- PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
- clk = clk_register_gate(NULL, "blink", "blink_override", 0,
- pmc_base + PMC_CTRL,
- PMC_CTRL_BLINK_ENB, 0, NULL);
- clk_register_clkdev(clk, "blink", NULL);
- clks[blink] = clk;
-
-}
-
-static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
- "pll_p", "pll_p_out2", "unused",
- "clk_32k", "pll_m_out1" };
-
-static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
- "pll_p", "pll_p_out4", "unused",
- "unused", "pll_x" };
-
-static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
- "pll_p", "pll_p_out4", "unused",
- "unused", "pll_x", "pll_x_out0" };
-
-static void __init tegra114_super_clk_init(void __iomem *clk_base)
-{
- struct clk *clk;
-
- /* CCLKG */
- clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents,
- ARRAY_SIZE(cclk_g_parents),
- CLK_SET_RATE_PARENT,
- clk_base + CCLKG_BURST_POLICY,
- 0, 4, 0, 0, NULL);
- clk_register_clkdev(clk, "cclk_g", NULL);
- clks[cclk_g] = clk;
-
- /* CCLKLP */
- clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents,
- ARRAY_SIZE(cclk_lp_parents),
- CLK_SET_RATE_PARENT,
- clk_base + CCLKLP_BURST_POLICY,
- 0, 4, 8, 9, NULL);
- clk_register_clkdev(clk, "cclk_lp", NULL);
- clks[cclk_lp] = clk;
-
- /* SCLK */
- clk = tegra_clk_register_super_mux("sclk", sclk_parents,
- ARRAY_SIZE(sclk_parents),
- CLK_SET_RATE_PARENT,
- clk_base + SCLK_BURST_POLICY,
- 0, 4, 0, 0, NULL);
- clk_register_clkdev(clk, "sclk", NULL);
- clks[sclk] = clk;
-
- /* HCLK */
- clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
- clk_base + SYSTEM_CLK_RATE, 4, 2, 0,
- &sysrate_lock);
- clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT |
- CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
- 7, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
- clk_register_clkdev(clk, "hclk", NULL);
- clks[hclk] = clk;
-
- /* PCLK */
- clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
- clk_base + SYSTEM_CLK_RATE, 0, 2, 0,
- &sysrate_lock);
- clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT |
- CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
- 3, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
- clk_register_clkdev(clk, "pclk", NULL);
- clks[pclk] = clk;
-}
-
-static struct tegra_periph_init_data tegra_periph_clk_list[] = {
- TEGRA_INIT_DATA_MUX("i2s0", NULL, "tegra30-i2s.0", mux_pllaout0_audio0_2x_pllp_clkm, CLK_SOURCE_I2S0, 30, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s0),
- TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra30-i2s.1", mux_pllaout0_audio1_2x_pllp_clkm, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1),
- TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra30-i2s.2", mux_pllaout0_audio2_2x_pllp_clkm, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2),
- TEGRA_INIT_DATA_MUX("i2s3", NULL, "tegra30-i2s.3", mux_pllaout0_audio3_2x_pllp_clkm, CLK_SOURCE_I2S3, 101, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s3),
- TEGRA_INIT_DATA_MUX("i2s4", NULL, "tegra30-i2s.4", mux_pllaout0_audio4_2x_pllp_clkm, CLK_SOURCE_I2S4, 102, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s4),
- TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra30-spdif", mux_pllaout0_audio_2x_pllp_clkm, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out),
- TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra30-spdif", mux_pllp_pllc_pllm, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in),
- TEGRA_INIT_DATA_MUX("pwm", NULL, "pwm", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_PWM, 17, &periph_l_regs, TEGRA_PERIPH_ON_APB, pwm),
- TEGRA_INIT_DATA_MUX("adx", NULL, "adx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_ADX, 154, &periph_w_regs, TEGRA_PERIPH_ON_APB, adx),
- TEGRA_INIT_DATA_MUX("amx", NULL, "amx", mux_plla_pllc_pllp_clkm, CLK_SOURCE_AMX, 153, &periph_w_regs, TEGRA_PERIPH_ON_APB, amx),
- TEGRA_INIT_DATA_MUX("hda", "hda", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA, 125, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda),
- TEGRA_INIT_DATA_MUX("hda2codec_2x", "hda2codec", "tegra30-hda", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, &periph_v_regs, TEGRA_PERIPH_ON_APB, hda2codec_2x),
- TEGRA_INIT_DATA_MUX("sbc1", NULL, "tegra11-spi.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1),
- TEGRA_INIT_DATA_MUX("sbc2", NULL, "tegra11-spi.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2),
- TEGRA_INIT_DATA_MUX("sbc3", NULL, "tegra11-spi.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3),
- TEGRA_INIT_DATA_MUX("sbc4", NULL, "tegra11-spi.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4),
- TEGRA_INIT_DATA_MUX("sbc5", NULL, "tegra11-spi.4", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC5, 104, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc5),
- TEGRA_INIT_DATA_MUX("sbc6", NULL, "tegra11-spi.5", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SBC6, 105, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc6),
- TEGRA_INIT_DATA_MUX8("ndflash", NULL, "tegra_nand", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
- TEGRA_INIT_DATA_MUX8("ndspeed", NULL, "tegra_nand_speed", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_NDSPEED, 80, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
- TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir),
- TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1),
- TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2),
- TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3),
- TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4),
- TEGRA_INIT_DATA_INT("vde", NULL, "vde", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde),
- TEGRA_INIT_DATA_MUX_FLAGS("csite", NULL, "csite", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, TEGRA_PERIPH_ON_APB, csite, CLK_IGNORE_UNUSED),
- TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, TEGRA_PERIPH_ON_APB, la),
- TEGRA_INIT_DATA_MUX("trace", NULL, "trace", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_TRACE, 77, &periph_u_regs, TEGRA_PERIPH_ON_APB, trace),
- TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr),
- TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor),
- TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi),
- TEGRA_INIT_DATA_I2C("i2c1", "div-clk", "tegra11-i2c.0", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, i2c1),
- TEGRA_INIT_DATA_I2C("i2c2", "div-clk", "tegra11-i2c.1", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, i2c2),
- TEGRA_INIT_DATA_I2C("i2c3", "div-clk", "tegra11-i2c.2", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, i2c3),
- TEGRA_INIT_DATA_I2C("i2c4", "div-clk", "tegra11-i2c.3", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, &periph_v_regs, i2c4),
- TEGRA_INIT_DATA_I2C("i2c5", "div-clk", "tegra11-i2c.4", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, &periph_h_regs, i2c5),
- TEGRA_INIT_DATA_UART("uarta", NULL, "tegra_uart.0", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTA, 6, &periph_l_regs, uarta),
- TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, uartb),
- TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, uartc),
- TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, uartd),
- TEGRA_INIT_DATA_INT("3d", NULL, "3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, &periph_l_regs, 0, gr_3d),
- TEGRA_INIT_DATA_INT("2d", NULL, "2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr_2d),
- TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor),
- TEGRA_INIT_DATA_INT8("vi", "vi", "tegra_camera", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi),
- TEGRA_INIT_DATA_INT8("epp", NULL, "epp", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp),
- TEGRA_INIT_DATA_INT8("msenc", NULL, "msenc", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_MSENC, 91, &periph_u_regs, TEGRA_PERIPH_WAR_1005168, msenc),
- TEGRA_INIT_DATA_INT8("tsec", NULL, "tsec", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_TSEC, 83, &periph_u_regs, 0, tsec),
- TEGRA_INIT_DATA_INT8("host1x", NULL, "host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x),
- TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi),
- TEGRA_INIT_DATA_MUX("cilab", "cilab", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILAB, 144, &periph_w_regs, 0, cilab),
- TEGRA_INIT_DATA_MUX("cilcd", "cilcd", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILCD, 145, &periph_w_regs, 0, cilcd),
- TEGRA_INIT_DATA_MUX("cile", "cile", "tegra_camera", mux_pllp_pllc_clkm, CLK_SOURCE_CILE, 146, &periph_w_regs, 0, cile),
- TEGRA_INIT_DATA_MUX("dsialp", "dsialp", "tegradc.0", mux_pllp_pllc_clkm, CLK_SOURCE_DSIALP, 147, &periph_w_regs, 0, dsialp),
- TEGRA_INIT_DATA_MUX("dsiblp", "dsiblp", "tegradc.1", mux_pllp_pllc_clkm, CLK_SOURCE_DSIBLP, 148, &periph_w_regs, 0, dsiblp),
- TEGRA_INIT_DATA_MUX("tsensor", NULL, "tegra-tsensor", mux_pllp_pllc_clkm_clk32, CLK_SOURCE_TSENSOR, 100, &periph_v_regs, TEGRA_PERIPH_ON_APB, tsensor),
- TEGRA_INIT_DATA_MUX("actmon", NULL, "actmon", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_ACTMON, 119, &periph_v_regs, 0, actmon),
- TEGRA_INIT_DATA_MUX8("extern1", NULL, "extern1", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, &periph_v_regs, 0, extern1),
- TEGRA_INIT_DATA_MUX8("extern2", NULL, "extern2", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, &periph_v_regs, 0, extern2),
- TEGRA_INIT_DATA_MUX8("extern3", NULL, "extern3", mux_plla_clk32_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, &periph_v_regs, 0, extern3),
- TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllp_pllc_clk32_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow),
- TEGRA_INIT_DATA_INT8("se", NULL, "se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, TEGRA_PERIPH_ON_APB, se),
- TEGRA_INIT_DATA_INT_FLAGS("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect, CLK_IGNORE_UNUSED),
- TEGRA_INIT_DATA_MUX("dfll_ref", "ref", "t114_dfll", mux_pllp_clkm, CLK_SOURCE_DFLL_REF, 155, &periph_w_regs, TEGRA_PERIPH_ON_APB, dfll_ref),
- TEGRA_INIT_DATA_MUX("dfll_soc", "soc", "t114_dfll", mux_pllp_clkm, CLK_SOURCE_DFLL_SOC, 155, &periph_w_regs, TEGRA_PERIPH_ON_APB, dfll_soc),
- TEGRA_INIT_DATA_MUX8("soc_therm", NULL, "soc_therm", mux_pllm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, &periph_u_regs, TEGRA_PERIPH_ON_APB, soc_therm),
- TEGRA_INIT_DATA_XUSB("xusb_host_src", "host_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_HOST_SRC, 143, &periph_w_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_host_src),
- TEGRA_INIT_DATA_XUSB("xusb_falcon_src", "falcon_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_falcon_src),
- TEGRA_INIT_DATA_XUSB("xusb_fs_src", "fs_src", "tegra_xhci", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_fs_src),
- TEGRA_INIT_DATA_XUSB("xusb_ss_src", "ss_src", "tegra_xhci", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, &periph_w_regs, TEGRA_PERIPH_NO_RESET, xusb_ss_src),
- TEGRA_INIT_DATA_XUSB("xusb_dev_src", "dev_src", "tegra_xhci", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, &periph_u_regs, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, xusb_dev_src),
- TEGRA_INIT_DATA_AUDIO("d_audio", "d_audio", "tegra30-ahub", CLK_SOURCE_D_AUDIO, 106, &periph_v_regs, TEGRA_PERIPH_ON_APB, d_audio),
- TEGRA_INIT_DATA_AUDIO("dam0", NULL, "tegra30-dam.0", CLK_SOURCE_DAM0, 108, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam0),
- TEGRA_INIT_DATA_AUDIO("dam1", NULL, "tegra30-dam.1", CLK_SOURCE_DAM1, 109, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam1),
- TEGRA_INIT_DATA_AUDIO("dam2", NULL, "tegra30-dam.2", CLK_SOURCE_DAM2, 110, &periph_v_regs, TEGRA_PERIPH_ON_APB, dam2),
-};
-
-static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
- TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP1, 29, 7, 27, &periph_l_regs, 0, disp1),
- TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllp_pllm_plld_plla_pllc_plld2_clkm, CLK_SOURCE_DISP2, 29, 7, 26, &periph_l_regs, 0, disp2),
-};
-
-static __init void tegra114_periph_clk_init(void __iomem *clk_base)
-{
- struct tegra_periph_init_data *data;
- struct clk *clk;
- int i;
u32 val;
- /* apbdma */
- clk = tegra_clk_register_periph_gate("apbdma", "clk_m", 0, clk_base,
- 0, 34, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[apbdma] = clk;
-
- /* rtc */
- clk = tegra_clk_register_periph_gate("rtc", "clk_32k",
- TEGRA_PERIPH_ON_APB |
- TEGRA_PERIPH_NO_RESET, clk_base,
- 0, 4, &periph_l_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "rtc-tegra");
- clks[rtc] = clk;
-
- /* kbc */
- clk = tegra_clk_register_periph_gate("kbc", "clk_32k",
- TEGRA_PERIPH_ON_APB |
- TEGRA_PERIPH_NO_RESET, clk_base,
- 0, 36, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[kbc] = clk;
-
- /* timer */
- clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base,
- 0, 5, &periph_l_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "timer");
- clks[timer] = clk;
-
- /* kfuse */
- clk = tegra_clk_register_periph_gate("kfuse", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 40,
- &periph_h_regs, periph_clk_enb_refcnt);
- clks[kfuse] = clk;
-
- /* fuse */
- clk = tegra_clk_register_periph_gate("fuse", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 39,
- &periph_h_regs, periph_clk_enb_refcnt);
- clks[fuse] = clk;
-
- /* fuse_burn */
- clk = tegra_clk_register_periph_gate("fuse_burn", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 39,
- &periph_h_regs, periph_clk_enb_refcnt);
- clks[fuse_burn] = clk;
-
- /* apbif */
- clk = tegra_clk_register_periph_gate("apbif", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 107,
- &periph_v_regs, periph_clk_enb_refcnt);
- clks[apbif] = clk;
-
- /* hda2hdmi */
- clk = tegra_clk_register_periph_gate("hda2hdmi", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 128,
- &periph_w_regs, periph_clk_enb_refcnt);
- clks[hda2hdmi] = clk;
-
- /* vcp */
- clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0, clk_base, 0,
- 29, &periph_l_regs,
- periph_clk_enb_refcnt);
- clks[vcp] = clk;
-
- /* bsea */
- clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0, clk_base,
- 0, 62, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[bsea] = clk;
-
- /* bsev */
- clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0, clk_base,
- 0, 63, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[bsev] = clk;
-
- /* mipi-cal */
- clk = tegra_clk_register_periph_gate("mipi-cal", "clk_m", 0, clk_base,
- 0, 56, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[mipi_cal] = clk;
-
- /* usbd */
- clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base,
- 0, 22, &periph_l_regs,
- periph_clk_enb_refcnt);
- clks[usbd] = clk;
-
- /* usb2 */
- clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base,
- 0, 58, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[usb2] = clk;
-
- /* usb3 */
- clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base,
- 0, 59, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[usb3] = clk;
-
- /* csi */
- clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base,
- 0, 52, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[csi] = clk;
-
- /* isp */
- clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0,
- 23, &periph_l_regs,
- periph_clk_enb_refcnt);
- clks[isp] = clk;
-
- /* csus */
- clk = tegra_clk_register_periph_gate("csus", "clk_m",
- TEGRA_PERIPH_NO_RESET, clk_base, 0, 92,
- &periph_u_regs, periph_clk_enb_refcnt);
- clks[csus] = clk;
-
- /* dds */
- clk = tegra_clk_register_periph_gate("dds", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 150,
- &periph_w_regs, periph_clk_enb_refcnt);
- clks[dds] = clk;
-
- /* dp2 */
- clk = tegra_clk_register_periph_gate("dp2", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 152,
- &periph_w_regs, periph_clk_enb_refcnt);
- clks[dp2] = clk;
-
- /* dtv */
- clk = tegra_clk_register_periph_gate("dtv", "clk_m",
- TEGRA_PERIPH_ON_APB, clk_base, 0, 79,
- &periph_u_regs, periph_clk_enb_refcnt);
- clks[dtv] = clk;
-
- /* dsia */
- clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
- ARRAY_SIZE(mux_plld_out0_plld2_out0),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock);
- clks[dsia_mux] = clk;
- clk = tegra_clk_register_periph_gate("dsia", "dsia_mux", 0, clk_base,
- 0, 48, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[dsia] = clk;
-
- /* dsib */
- clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0,
- ARRAY_SIZE(mux_plld_out0_plld2_out0),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock);
- clks[dsib_mux] = clk;
- clk = tegra_clk_register_periph_gate("dsib", "dsib_mux", 0, clk_base,
- 0, 82, &periph_u_regs,
- periph_clk_enb_refcnt);
- clks[dsib] = clk;
-
/* xusb_hs_src */
val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
val |= BIT(25); /* always select PLLU_60M */
@@ -2099,52 +1191,31 @@
clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
1, 1);
- clks[xusb_hs_src] = clk;
+ clks[TEGRA114_CLK_XUSB_HS_SRC] = clk;
- /* xusb_host */
- clk = tegra_clk_register_periph_gate("xusb_host", "xusb_host_src", 0,
- clk_base, 0, 89, &periph_u_regs,
- periph_clk_enb_refcnt);
- clks[xusb_host] = clk;
+ /* dsia mux */
+ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0),
+ CLK_SET_RATE_NO_REPARENT,
+ clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock);
+ clks[TEGRA114_CLK_DSIA_MUX] = clk;
- /* xusb_ss */
- clk = tegra_clk_register_periph_gate("xusb_ss", "xusb_ss_src", 0,
- clk_base, 0, 156, &periph_w_regs,
- periph_clk_enb_refcnt);
- clks[xusb_host] = clk;
+ /* dsib mux */
+ clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0),
+ CLK_SET_RATE_NO_REPARENT,
+ clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock);
+ clks[TEGRA114_CLK_DSIB_MUX] = clk;
- /* xusb_dev */
- clk = tegra_clk_register_periph_gate("xusb_dev", "xusb_dev_src", 0,
- clk_base, 0, 95, &periph_u_regs,
- periph_clk_enb_refcnt);
- clks[xusb_dev] = clk;
-
- /* emc */
+ /* emc mux */
clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
ARRAY_SIZE(mux_pllmcp_clkm),
CLK_SET_RATE_NO_REPARENT,
clk_base + CLK_SOURCE_EMC,
29, 3, 0, NULL);
- clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base,
- CLK_IGNORE_UNUSED, 57, &periph_h_regs,
- periph_clk_enb_refcnt);
- clks[emc] = clk;
- for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
- data = &tegra_periph_clk_list[i];
- clk = tegra_clk_register_periph(data->name, data->parent_names,
- data->num_parents, &data->periph,
- clk_base, data->offset, data->flags);
- clks[data->clk_id] = clk;
- }
-
- for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) {
- data = &tegra_periph_nodiv_clk_list[i];
- clk = tegra_clk_register_periph_nodiv(data->name,
- data->parent_names, data->num_parents,
- &data->periph, clk_base, data->offset);
- clks[data->clk_id] = clk;
- }
+ tegra_periph_clk_init(clk_base, pmc_base, tegra114_clks,
+ &pll_p_params);
}
/* Tegra114 CPU clock and reset control functions */
@@ -2207,28 +1278,37 @@
* breaks
*/
static struct tegra_clk_init_table init_table[] __initdata = {
- {uarta, pll_p, 408000000, 0},
- {uartb, pll_p, 408000000, 0},
- {uartc, pll_p, 408000000, 0},
- {uartd, pll_p, 408000000, 0},
- {pll_a, clk_max, 564480000, 1},
- {pll_a_out0, clk_max, 11289600, 1},
- {extern1, pll_a_out0, 0, 1},
- {clk_out_1_mux, extern1, 0, 1},
- {clk_out_1, clk_max, 0, 1},
- {i2s0, pll_a_out0, 11289600, 0},
- {i2s1, pll_a_out0, 11289600, 0},
- {i2s2, pll_a_out0, 11289600, 0},
- {i2s3, pll_a_out0, 11289600, 0},
- {i2s4, pll_a_out0, 11289600, 0},
- {dfll_soc, pll_p, 51000000, 1},
- {dfll_ref, pll_p, 51000000, 1},
- {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
+ {TEGRA114_CLK_UARTA, TEGRA114_CLK_PLL_P, 408000000, 0},
+ {TEGRA114_CLK_UARTB, TEGRA114_CLK_PLL_P, 408000000, 0},
+ {TEGRA114_CLK_UARTC, TEGRA114_CLK_PLL_P, 408000000, 0},
+ {TEGRA114_CLK_UARTD, TEGRA114_CLK_PLL_P, 408000000, 0},
+ {TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 1},
+ {TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 1},
+ {TEGRA114_CLK_EXTERN1, TEGRA114_CLK_PLL_A_OUT0, 0, 1},
+ {TEGRA114_CLK_CLK_OUT_1_MUX, TEGRA114_CLK_EXTERN1, 0, 1},
+ {TEGRA114_CLK_CLK_OUT_1, TEGRA114_CLK_CLK_MAX, 0, 1},
+ {TEGRA114_CLK_I2S0, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA114_CLK_I2S1, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA114_CLK_I2S2, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA114_CLK_I2S3, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA114_CLK_I2S4, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA114_CLK_HOST1X, TEGRA114_CLK_PLL_P, 136000000, 0},
+ {TEGRA114_CLK_DFLL_SOC, TEGRA114_CLK_PLL_P, 51000000, 1},
+ {TEGRA114_CLK_DFLL_REF, TEGRA114_CLK_PLL_P, 51000000, 1},
+ {TEGRA114_CLK_DISP1, TEGRA114_CLK_PLL_P, 0, 0},
+ {TEGRA114_CLK_DISP2, TEGRA114_CLK_PLL_P, 0, 0},
+ {TEGRA114_CLK_GR2D, TEGRA114_CLK_PLL_C2, 300000000, 0},
+ {TEGRA114_CLK_GR3D, TEGRA114_CLK_PLL_C2, 300000000, 0},
+ {TEGRA114_CLK_DSIALP, TEGRA114_CLK_PLL_P, 68000000, 0},
+ {TEGRA114_CLK_DSIBLP, TEGRA114_CLK_PLL_P, 68000000, 0},
+
+ /* This MUST be the last entry. */
+ {TEGRA114_CLK_CLK_MAX, TEGRA114_CLK_CLK_MAX, 0, 0},
};
static void __init tegra114_clock_apply_init_table(void)
{
- tegra_init_from_table(init_table, clks, clk_max);
+ tegra_init_from_table(init_table, clks, TEGRA114_CLK_CLK_MAX);
}
@@ -2359,7 +1439,6 @@
static void __init tegra114_clock_init(struct device_node *np)
{
struct device_node *node;
- int i;
clk_base = of_iomap(np, 0);
if (!clk_base) {
@@ -2381,29 +1460,24 @@
return;
}
+ clks = tegra_clk_init(clk_base, TEGRA114_CLK_CLK_MAX,
+ TEGRA114_CLK_PERIPH_BANKS);
+ if (!clks)
+ return;
+
if (tegra114_osc_clk_init(clk_base) < 0)
return;
tegra114_fixed_clk_init(clk_base);
tegra114_pll_init(clk_base, pmc_base);
- tegra114_periph_clk_init(clk_base);
- tegra114_audio_clk_init(clk_base);
- tegra114_pmc_clk_init(pmc_base);
- tegra114_super_clk_init(clk_base);
+ tegra114_periph_clk_init(clk_base, pmc_base);
+ tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks, &pll_a_params);
+ tegra_pmc_clk_init(pmc_base, tegra114_clks);
+ tegra_super_clk_gen4_init(clk_base, pmc_base, tegra114_clks,
+ &pll_x_params);
- for (i = 0; i < ARRAY_SIZE(clks); i++) {
- if (IS_ERR(clks[i])) {
- pr_err
- ("Tegra114 clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
- }
- if (!clks[i])
- clks[i] = ERR_PTR(-EINVAL);
- }
-
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ tegra_add_of_provider(np);
+ tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
tegra_clk_apply_init_table = tegra114_clock_apply_init_table;
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
new file mode 100644
index 0000000..aff86b5
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -0,0 +1,1424 @@
+/*
+ * Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk/tegra.h>
+#include <dt-bindings/clock/tegra124-car.h>
+
+#include "clk.h"
+#include "clk-id.h"
+
+#define CLK_SOURCE_CSITE 0x1d4
+#define CLK_SOURCE_EMC 0x19c
+#define CLK_SOURCE_XUSB_SS_SRC 0x610
+
+#define PLLC_BASE 0x80
+#define PLLC_OUT 0x84
+#define PLLC_MISC2 0x88
+#define PLLC_MISC 0x8c
+#define PLLC2_BASE 0x4e8
+#define PLLC2_MISC 0x4ec
+#define PLLC3_BASE 0x4fc
+#define PLLC3_MISC 0x500
+#define PLLM_BASE 0x90
+#define PLLM_OUT 0x94
+#define PLLM_MISC 0x9c
+#define PLLP_BASE 0xa0
+#define PLLP_MISC 0xac
+#define PLLA_BASE 0xb0
+#define PLLA_MISC 0xbc
+#define PLLD_BASE 0xd0
+#define PLLD_MISC 0xdc
+#define PLLU_BASE 0xc0
+#define PLLU_MISC 0xcc
+#define PLLX_BASE 0xe0
+#define PLLX_MISC 0xe4
+#define PLLX_MISC2 0x514
+#define PLLX_MISC3 0x518
+#define PLLE_BASE 0xe8
+#define PLLE_MISC 0xec
+#define PLLD2_BASE 0x4b8
+#define PLLD2_MISC 0x4bc
+#define PLLE_AUX 0x48c
+#define PLLRE_BASE 0x4c4
+#define PLLRE_MISC 0x4c8
+#define PLLDP_BASE 0x590
+#define PLLDP_MISC 0x594
+#define PLLC4_BASE 0x5a4
+#define PLLC4_MISC 0x5a8
+
+#define PLLC_IDDQ_BIT 26
+#define PLLRE_IDDQ_BIT 16
+#define PLLSS_IDDQ_BIT 19
+
+#define PLL_BASE_LOCK BIT(27)
+#define PLLE_MISC_LOCK BIT(11)
+#define PLLRE_MISC_LOCK BIT(24)
+
+#define PLL_MISC_LOCK_ENABLE 18
+#define PLLC_MISC_LOCK_ENABLE 24
+#define PLLDU_MISC_LOCK_ENABLE 22
+#define PLLE_MISC_LOCK_ENABLE 9
+#define PLLRE_MISC_LOCK_ENABLE 30
+#define PLLSS_MISC_LOCK_ENABLE 30
+
+#define PLLXC_SW_MAX_P 6
+
+#define PMC_PLLM_WB0_OVERRIDE 0x1dc
+#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
+
+#define UTMIP_PLL_CFG2 0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
+
+#define UTMIP_PLL_CFG1 0x484
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
+#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
+
+#define UTMIPLL_HW_PWRDN_CFG0 0x52c
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
+#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
+#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
+#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
+#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
+
+/* Tegra CPU clock and reset control regs */
+#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
+
+#ifdef CONFIG_PM_SLEEP
+static struct cpu_clk_suspend_context {
+ u32 clk_csite_src;
+} tegra124_cpu_clk_sctx;
+#endif
+
+static void __iomem *clk_base;
+static void __iomem *pmc_base;
+
+static unsigned long osc_freq;
+static unsigned long pll_ref_freq;
+
+static DEFINE_SPINLOCK(pll_d_lock);
+static DEFINE_SPINLOCK(pll_d2_lock);
+static DEFINE_SPINLOCK(pll_e_lock);
+static DEFINE_SPINLOCK(pll_re_lock);
+static DEFINE_SPINLOCK(pll_u_lock);
+
+/* possible OSC frequencies in Hz */
+static unsigned long tegra124_input_freq[] = {
+ [0] = 13000000,
+ [1] = 16800000,
+ [4] = 19200000,
+ [5] = 38400000,
+ [8] = 12000000,
+ [9] = 48000000,
+ [12] = 260000000,
+};
+
+static const char *mux_plld_out0_plld2_out0[] = {
+ "pll_d_out0", "pll_d2_out0",
+};
+#define mux_plld_out0_plld2_out0_idx NULL
+
+static const char *mux_pllmcp_clkm[] = {
+ "pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_c2", "pll_c3",
+};
+#define mux_pllmcp_clkm_idx NULL
+
+static struct div_nmp pllxc_nmp = {
+ .divm_shift = 0,
+ .divm_width = 8,
+ .divn_shift = 8,
+ .divn_width = 8,
+ .divp_shift = 20,
+ .divp_width = 4,
+};
+
+static struct pdiv_map pllxc_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 3, .hw_val = 2 },
+ { .pdiv = 4, .hw_val = 3 },
+ { .pdiv = 5, .hw_val = 4 },
+ { .pdiv = 6, .hw_val = 5 },
+ { .pdiv = 8, .hw_val = 6 },
+ { .pdiv = 10, .hw_val = 7 },
+ { .pdiv = 12, .hw_val = 8 },
+ { .pdiv = 16, .hw_val = 9 },
+ { .pdiv = 12, .hw_val = 10 },
+ { .pdiv = 16, .hw_val = 11 },
+ { .pdiv = 20, .hw_val = 12 },
+ { .pdiv = 24, .hw_val = 13 },
+ { .pdiv = 32, .hw_val = 14 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_x_freq_table[] = {
+ /* 1 GHz */
+ {12000000, 1000000000, 83, 0, 1}, /* actual: 996.0 MHz */
+ {13000000, 1000000000, 76, 0, 1}, /* actual: 988.0 MHz */
+ {16800000, 1000000000, 59, 0, 1}, /* actual: 991.2 MHz */
+ {19200000, 1000000000, 52, 0, 1}, /* actual: 998.4 MHz */
+ {26000000, 1000000000, 76, 1, 1}, /* actual: 988.0 MHz */
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_x_params = {
+ .input_min = 12000000,
+ .input_max = 800000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 700000000,
+ .vco_max = 3000000000UL,
+ .base_reg = PLLX_BASE,
+ .misc_reg = PLLX_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLX_MISC3,
+ .iddq_bit_idx = 3,
+ .max_p = 6,
+ .dyn_ramp_reg = PLLX_MISC2,
+ .stepa_shift = 16,
+ .stepb_shift = 24,
+ .pdiv_tohw = pllxc_p,
+ .div_nmp = &pllxc_nmp,
+ .freq_table = pll_x_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
+};
+
+static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
+ { 12000000, 624000000, 104, 1, 2},
+ { 12000000, 600000000, 100, 1, 2},
+ { 13000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */
+ { 16800000, 600000000, 71, 1, 2}, /* actual: 596.4 MHz */
+ { 19200000, 600000000, 62, 1, 2}, /* actual: 595.2 MHz */
+ { 26000000, 600000000, 92, 2, 2}, /* actual: 598.0 MHz */
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_params pll_c_params = {
+ .input_min = 12000000,
+ .input_max = 800000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 600000000,
+ .vco_max = 1400000000,
+ .base_reg = PLLC_BASE,
+ .misc_reg = PLLC_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLC_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLC_MISC,
+ .iddq_bit_idx = PLLC_IDDQ_BIT,
+ .max_p = PLLXC_SW_MAX_P,
+ .dyn_ramp_reg = PLLC_MISC2,
+ .stepa_shift = 17,
+ .stepb_shift = 9,
+ .pdiv_tohw = pllxc_p,
+ .div_nmp = &pllxc_nmp,
+ .freq_table = pll_c_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
+};
+
+static struct div_nmp pllcx_nmp = {
+ .divm_shift = 0,
+ .divm_width = 2,
+ .divn_shift = 8,
+ .divn_width = 8,
+ .divp_shift = 20,
+ .divp_width = 3,
+};
+
+static struct pdiv_map pllc_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 3, .hw_val = 2 },
+ { .pdiv = 4, .hw_val = 3 },
+ { .pdiv = 6, .hw_val = 4 },
+ { .pdiv = 8, .hw_val = 5 },
+ { .pdiv = 12, .hw_val = 6 },
+ { .pdiv = 16, .hw_val = 7 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = {
+ {12000000, 600000000, 100, 1, 2},
+ {13000000, 600000000, 92, 1, 2}, /* actual: 598.0 MHz */
+ {16800000, 600000000, 71, 1, 2}, /* actual: 596.4 MHz */
+ {19200000, 600000000, 62, 1, 2}, /* actual: 595.2 MHz */
+ {26000000, 600000000, 92, 2, 2}, /* actual: 598.0 MHz */
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_c2_params = {
+ .input_min = 12000000,
+ .input_max = 48000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000,
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLC2_BASE,
+ .misc_reg = PLLC2_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .pdiv_tohw = pllc_p,
+ .div_nmp = &pllcx_nmp,
+ .max_p = 7,
+ .ext_misc_reg[0] = 0x4f0,
+ .ext_misc_reg[1] = 0x4f4,
+ .ext_misc_reg[2] = 0x4f8,
+ .freq_table = pll_cx_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
+};
+
+static struct tegra_clk_pll_params pll_c3_params = {
+ .input_min = 12000000,
+ .input_max = 48000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000,
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLC3_BASE,
+ .misc_reg = PLLC3_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .pdiv_tohw = pllc_p,
+ .div_nmp = &pllcx_nmp,
+ .max_p = 7,
+ .ext_misc_reg[0] = 0x504,
+ .ext_misc_reg[1] = 0x508,
+ .ext_misc_reg[2] = 0x50c,
+ .freq_table = pll_cx_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
+};
+
+static struct div_nmp pllss_nmp = {
+ .divm_shift = 0,
+ .divm_width = 8,
+ .divn_shift = 8,
+ .divn_width = 8,
+ .divp_shift = 20,
+ .divp_width = 4,
+};
+
+static struct pdiv_map pll12g_ssd_esd_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 3, .hw_val = 2 },
+ { .pdiv = 4, .hw_val = 3 },
+ { .pdiv = 5, .hw_val = 4 },
+ { .pdiv = 6, .hw_val = 5 },
+ { .pdiv = 8, .hw_val = 6 },
+ { .pdiv = 10, .hw_val = 7 },
+ { .pdiv = 12, .hw_val = 8 },
+ { .pdiv = 16, .hw_val = 9 },
+ { .pdiv = 12, .hw_val = 10 },
+ { .pdiv = 16, .hw_val = 11 },
+ { .pdiv = 20, .hw_val = 12 },
+ { .pdiv = 24, .hw_val = 13 },
+ { .pdiv = 32, .hw_val = 14 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_c4_freq_table[] = {
+ { 12000000, 600000000, 100, 1, 1},
+ { 13000000, 600000000, 92, 1, 1}, /* actual: 598.0 MHz */
+ { 16800000, 600000000, 71, 1, 1}, /* actual: 596.4 MHz */
+ { 19200000, 600000000, 62, 1, 1}, /* actual: 595.2 MHz */
+ { 26000000, 600000000, 92, 2, 1}, /* actual: 598.0 MHz */
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_params pll_c4_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLC4_BASE,
+ .misc_reg = PLLC4_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLC4_BASE,
+ .iddq_bit_idx = PLLSS_IDDQ_BIT,
+ .pdiv_tohw = pll12g_ssd_esd_p,
+ .div_nmp = &pllss_nmp,
+ .ext_misc_reg[0] = 0x5ac,
+ .ext_misc_reg[1] = 0x5b0,
+ .ext_misc_reg[2] = 0x5b4,
+ .freq_table = pll_c4_freq_table,
+};
+
+static struct pdiv_map pllm_p[] = {
+ { .pdiv = 1, .hw_val = 0 },
+ { .pdiv = 2, .hw_val = 1 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct tegra_clk_pll_freq_table pll_m_freq_table[] = {
+ {12000000, 800000000, 66, 1, 1}, /* actual: 792.0 MHz */
+ {13000000, 800000000, 61, 1, 1}, /* actual: 793.0 MHz */
+ {16800000, 800000000, 47, 1, 1}, /* actual: 789.6 MHz */
+ {19200000, 800000000, 41, 1, 1}, /* actual: 787.2 MHz */
+ {26000000, 800000000, 61, 2, 1}, /* actual: 793.0 MHz */
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct div_nmp pllm_nmp = {
+ .divm_shift = 0,
+ .divm_width = 8,
+ .override_divm_shift = 0,
+ .divn_shift = 8,
+ .divn_width = 8,
+ .override_divn_shift = 8,
+ .divp_shift = 20,
+ .divp_width = 1,
+ .override_divp_shift = 27,
+};
+
+static struct tegra_clk_pll_params pll_m_params = {
+ .input_min = 12000000,
+ .input_max = 500000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 50 MHz */
+ .vco_min = 400000000,
+ .vco_max = 1066000000,
+ .base_reg = PLLM_BASE,
+ .misc_reg = PLLM_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .max_p = 2,
+ .pdiv_tohw = pllm_p,
+ .div_nmp = &pllm_nmp,
+ .pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE,
+ .pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE_2,
+ .freq_table = pll_m_freq_table,
+ .flags = TEGRA_PLL_USE_LOCK,
+};
+
+static struct tegra_clk_pll_freq_table pll_e_freq_table[] = {
+ /* PLLE special case: use cpcon field to store cml divider value */
+ {336000000, 100000000, 100, 21, 16, 11},
+ {312000000, 100000000, 200, 26, 24, 13},
+ {13000000, 100000000, 200, 1, 26, 13},
+ {12000000, 100000000, 200, 1, 24, 13},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct div_nmp plle_nmp = {
+ .divm_shift = 0,
+ .divm_width = 8,
+ .divn_shift = 8,
+ .divn_width = 8,
+ .divp_shift = 24,
+ .divp_width = 4,
+};
+
+static struct tegra_clk_pll_params pll_e_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 75000000,
+ .vco_min = 1600000000,
+ .vco_max = 2400000000U,
+ .base_reg = PLLE_BASE,
+ .misc_reg = PLLE_MISC,
+ .aux_reg = PLLE_AUX,
+ .lock_mask = PLLE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .div_nmp = &plle_nmp,
+ .freq_table = pll_e_freq_table,
+ .flags = TEGRA_PLL_FIXED,
+ .fixed_rate = 100000000,
+};
+
+static const struct clk_div_table pll_re_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 3, .div = 4 },
+ { .val = 4, .div = 5 },
+ { .val = 5, .div = 6 },
+ { .val = 0, .div = 0 },
+};
+
+static struct div_nmp pllre_nmp = {
+ .divm_shift = 0,
+ .divm_width = 8,
+ .divn_shift = 8,
+ .divn_width = 8,
+ .divp_shift = 16,
+ .divp_width = 4,
+};
+
+static struct tegra_clk_pll_params pll_re_vco_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */
+ .vco_min = 300000000,
+ .vco_max = 600000000,
+ .base_reg = PLLRE_BASE,
+ .misc_reg = PLLRE_MISC,
+ .lock_mask = PLLRE_MISC_LOCK,
+ .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLRE_MISC,
+ .iddq_bit_idx = PLLRE_IDDQ_BIT,
+ .div_nmp = &pllre_nmp,
+ .flags = TEGRA_PLL_USE_LOCK,
+};
+
+static struct div_nmp pllp_nmp = {
+ .divm_shift = 0,
+ .divm_width = 5,
+ .divn_shift = 8,
+ .divn_width = 10,
+ .divp_shift = 20,
+ .divp_width = 3,
+};
+
+static struct tegra_clk_pll_freq_table pll_p_freq_table[] = {
+ {12000000, 216000000, 432, 12, 1, 8},
+ {13000000, 216000000, 432, 13, 1, 8},
+ {16800000, 216000000, 360, 14, 1, 8},
+ {19200000, 216000000, 360, 16, 1, 8},
+ {26000000, 216000000, 432, 26, 1, 8},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_p_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 200000000,
+ .vco_max = 700000000,
+ .base_reg = PLLP_BASE,
+ .misc_reg = PLLP_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .div_nmp = &pllp_nmp,
+ .freq_table = pll_p_freq_table,
+ .fixed_rate = 408000000,
+ .flags = TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK,
+};
+
+static struct tegra_clk_pll_freq_table pll_a_freq_table[] = {
+ {9600000, 282240000, 147, 5, 0, 4},
+ {9600000, 368640000, 192, 5, 0, 4},
+ {9600000, 240000000, 200, 8, 0, 8},
+
+ {28800000, 282240000, 245, 25, 0, 8},
+ {28800000, 368640000, 320, 25, 0, 8},
+ {28800000, 240000000, 200, 24, 0, 8},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_a_params = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 200000000,
+ .vco_max = 700000000,
+ .base_reg = PLLA_BASE,
+ .misc_reg = PLLA_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .div_nmp = &pllp_nmp,
+ .freq_table = pll_a_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
+};
+
+static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
+ {12000000, 216000000, 864, 12, 4, 12},
+ {13000000, 216000000, 864, 13, 4, 12},
+ {16800000, 216000000, 720, 14, 4, 12},
+ {19200000, 216000000, 720, 16, 4, 12},
+ {26000000, 216000000, 864, 26, 4, 12},
+
+ {12000000, 594000000, 594, 12, 1, 12},
+ {13000000, 594000000, 594, 13, 1, 12},
+ {16800000, 594000000, 495, 14, 1, 12},
+ {19200000, 594000000, 495, 16, 1, 12},
+ {26000000, 594000000, 594, 26, 1, 12},
+
+ {12000000, 1000000000, 1000, 12, 1, 12},
+ {13000000, 1000000000, 1000, 13, 1, 12},
+ {19200000, 1000000000, 625, 12, 1, 12},
+ {26000000, 1000000000, 1000, 26, 1, 12},
+
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_d_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 500000000,
+ .vco_max = 1000000000,
+ .base_reg = PLLD_BASE,
+ .misc_reg = PLLD_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+ .div_nmp = &pllp_nmp,
+ .freq_table = pll_d_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK,
+};
+
+static struct tegra_clk_pll_freq_table tegra124_pll_d2_freq_table[] = {
+ { 12000000, 148500000, 99, 1, 8},
+ { 12000000, 594000000, 99, 1, 1},
+ { 13000000, 594000000, 91, 1, 1}, /* actual: 591.5 MHz */
+ { 16800000, 594000000, 71, 1, 1}, /* actual: 596.4 MHz */
+ { 19200000, 594000000, 62, 1, 1}, /* actual: 595.2 MHz */
+ { 26000000, 594000000, 91, 2, 1}, /* actual: 591.5 MHz */
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_params tegra124_pll_d2_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLD2_BASE,
+ .misc_reg = PLLD2_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLD2_BASE,
+ .iddq_bit_idx = PLLSS_IDDQ_BIT,
+ .pdiv_tohw = pll12g_ssd_esd_p,
+ .div_nmp = &pllss_nmp,
+ .ext_misc_reg[0] = 0x570,
+ .ext_misc_reg[1] = 0x574,
+ .ext_misc_reg[2] = 0x578,
+ .max_p = 15,
+ .freq_table = tegra124_pll_d2_freq_table,
+};
+
+static struct tegra_clk_pll_freq_table pll_dp_freq_table[] = {
+ { 12000000, 600000000, 100, 1, 1},
+ { 13000000, 600000000, 92, 1, 1}, /* actual: 598.0 MHz */
+ { 16800000, 600000000, 71, 1, 1}, /* actual: 596.4 MHz */
+ { 19200000, 600000000, 62, 1, 1}, /* actual: 595.2 MHz */
+ { 26000000, 600000000, 92, 2, 1}, /* actual: 598.0 MHz */
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct tegra_clk_pll_params pll_dp_params = {
+ .input_min = 12000000,
+ .input_max = 1000000000,
+ .cf_min = 12000000,
+ .cf_max = 19200000, /* s/w policy, h/w capability 38 MHz */
+ .vco_min = 600000000,
+ .vco_max = 1200000000,
+ .base_reg = PLLDP_BASE,
+ .misc_reg = PLLDP_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE,
+ .lock_delay = 300,
+ .iddq_reg = PLLDP_BASE,
+ .iddq_bit_idx = PLLSS_IDDQ_BIT,
+ .pdiv_tohw = pll12g_ssd_esd_p,
+ .div_nmp = &pllss_nmp,
+ .ext_misc_reg[0] = 0x598,
+ .ext_misc_reg[1] = 0x59c,
+ .ext_misc_reg[2] = 0x5a0,
+ .max_p = 5,
+ .freq_table = pll_dp_freq_table,
+};
+
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
+static struct div_nmp pllu_nmp = {
+ .divm_shift = 0,
+ .divm_width = 5,
+ .divn_shift = 8,
+ .divn_width = 10,
+ .divp_shift = 20,
+ .divp_width = 1,
+};
+
+static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
+ {12000000, 480000000, 960, 12, 2, 12},
+ {13000000, 480000000, 960, 13, 2, 12},
+ {16800000, 480000000, 400, 7, 2, 5},
+ {19200000, 480000000, 200, 4, 2, 3},
+ {26000000, 480000000, 960, 26, 2, 12},
+ {0, 0, 0, 0, 0, 0},
+};
+
+static struct tegra_clk_pll_params pll_u_params = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 480000000,
+ .vco_max = 960000000,
+ .base_reg = PLLU_BASE,
+ .misc_reg = PLLU_MISC,
+ .lock_mask = PLL_BASE_LOCK,
+ .lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
+ .lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
+ .div_nmp = &pllu_nmp,
+ .freq_table = pll_u_freq_table,
+ .flags = TEGRA_PLLU | TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK,
+};
+
+struct utmi_clk_param {
+ /* Oscillator Frequency in KHz */
+ u32 osc_frequency;
+ /* UTMIP PLL Enable Delay Count */
+ u8 enable_delay_count;
+ /* UTMIP PLL Stable count */
+ u8 stable_count;
+ /* UTMIP PLL Active delay count */
+ u8 active_delay_count;
+ /* UTMIP PLL Xtal frequency count */
+ u8 xtal_freq_count;
+};
+
+static const struct utmi_clk_param utmi_parameters[] = {
+ {.osc_frequency = 13000000, .enable_delay_count = 0x02,
+ .stable_count = 0x33, .active_delay_count = 0x05,
+ .xtal_freq_count = 0x7F},
+ {.osc_frequency = 19200000, .enable_delay_count = 0x03,
+ .stable_count = 0x4B, .active_delay_count = 0x06,
+ .xtal_freq_count = 0xBB},
+ {.osc_frequency = 12000000, .enable_delay_count = 0x02,
+ .stable_count = 0x2F, .active_delay_count = 0x04,
+ .xtal_freq_count = 0x76},
+ {.osc_frequency = 26000000, .enable_delay_count = 0x04,
+ .stable_count = 0x66, .active_delay_count = 0x09,
+ .xtal_freq_count = 0xFE},
+ {.osc_frequency = 16800000, .enable_delay_count = 0x03,
+ .stable_count = 0x41, .active_delay_count = 0x0A,
+ .xtal_freq_count = 0xA4},
+};
+
+static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
+ [tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true },
+ [tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
+ [tegra_clk_timer] = { .dt_id = TEGRA124_CLK_TIMER, .present = true },
+ [tegra_clk_uarta] = { .dt_id = TEGRA124_CLK_UARTA, .present = true },
+ [tegra_clk_sdmmc2] = { .dt_id = TEGRA124_CLK_SDMMC2, .present = true },
+ [tegra_clk_i2s1] = { .dt_id = TEGRA124_CLK_I2S1, .present = true },
+ [tegra_clk_i2c1] = { .dt_id = TEGRA124_CLK_I2C1, .present = true },
+ [tegra_clk_ndflash] = { .dt_id = TEGRA124_CLK_NDFLASH, .present = true },
+ [tegra_clk_sdmmc1] = { .dt_id = TEGRA124_CLK_SDMMC1, .present = true },
+ [tegra_clk_sdmmc4] = { .dt_id = TEGRA124_CLK_SDMMC4, .present = true },
+ [tegra_clk_pwm] = { .dt_id = TEGRA124_CLK_PWM, .present = true },
+ [tegra_clk_i2s2] = { .dt_id = TEGRA124_CLK_I2S2, .present = true },
+ [tegra_clk_gr2d] = { .dt_id = TEGRA124_CLK_GR_2D, .present = true },
+ [tegra_clk_usbd] = { .dt_id = TEGRA124_CLK_USBD, .present = true },
+ [tegra_clk_isp_8] = { .dt_id = TEGRA124_CLK_ISP, .present = true },
+ [tegra_clk_gr3d] = { .dt_id = TEGRA124_CLK_GR_3D, .present = true },
+ [tegra_clk_disp2] = { .dt_id = TEGRA124_CLK_DISP2, .present = true },
+ [tegra_clk_disp1] = { .dt_id = TEGRA124_CLK_DISP1, .present = true },
+ [tegra_clk_host1x] = { .dt_id = TEGRA124_CLK_HOST1X, .present = true },
+ [tegra_clk_vcp] = { .dt_id = TEGRA124_CLK_VCP, .present = true },
+ [tegra_clk_i2s0] = { .dt_id = TEGRA124_CLK_I2S0, .present = true },
+ [tegra_clk_apbdma] = { .dt_id = TEGRA124_CLK_APBDMA, .present = true },
+ [tegra_clk_kbc] = { .dt_id = TEGRA124_CLK_KBC, .present = true },
+ [tegra_clk_kfuse] = { .dt_id = TEGRA124_CLK_KFUSE, .present = true },
+ [tegra_clk_sbc1] = { .dt_id = TEGRA124_CLK_SBC1, .present = true },
+ [tegra_clk_nor] = { .dt_id = TEGRA124_CLK_NOR, .present = true },
+ [tegra_clk_sbc2] = { .dt_id = TEGRA124_CLK_SBC2, .present = true },
+ [tegra_clk_sbc3] = { .dt_id = TEGRA124_CLK_SBC3, .present = true },
+ [tegra_clk_i2c5] = { .dt_id = TEGRA124_CLK_I2C5, .present = true },
+ [tegra_clk_dsia] = { .dt_id = TEGRA124_CLK_DSIA, .present = true },
+ [tegra_clk_mipi] = { .dt_id = TEGRA124_CLK_MIPI, .present = true },
+ [tegra_clk_hdmi] = { .dt_id = TEGRA124_CLK_HDMI, .present = true },
+ [tegra_clk_csi] = { .dt_id = TEGRA124_CLK_CSI, .present = true },
+ [tegra_clk_i2c2] = { .dt_id = TEGRA124_CLK_I2C2, .present = true },
+ [tegra_clk_uartc] = { .dt_id = TEGRA124_CLK_UARTC, .present = true },
+ [tegra_clk_mipi_cal] = { .dt_id = TEGRA124_CLK_MIPI_CAL, .present = true },
+ [tegra_clk_emc] = { .dt_id = TEGRA124_CLK_EMC, .present = true },
+ [tegra_clk_usb2] = { .dt_id = TEGRA124_CLK_USB2, .present = true },
+ [tegra_clk_usb3] = { .dt_id = TEGRA124_CLK_USB3, .present = true },
+ [tegra_clk_vde_8] = { .dt_id = TEGRA124_CLK_VDE, .present = true },
+ [tegra_clk_bsea] = { .dt_id = TEGRA124_CLK_BSEA, .present = true },
+ [tegra_clk_bsev] = { .dt_id = TEGRA124_CLK_BSEV, .present = true },
+ [tegra_clk_uartd] = { .dt_id = TEGRA124_CLK_UARTD, .present = true },
+ [tegra_clk_i2c3] = { .dt_id = TEGRA124_CLK_I2C3, .present = true },
+ [tegra_clk_sbc4] = { .dt_id = TEGRA124_CLK_SBC4, .present = true },
+ [tegra_clk_sdmmc3] = { .dt_id = TEGRA124_CLK_SDMMC3, .present = true },
+ [tegra_clk_pcie] = { .dt_id = TEGRA124_CLK_PCIE, .present = true },
+ [tegra_clk_owr] = { .dt_id = TEGRA124_CLK_OWR, .present = true },
+ [tegra_clk_afi] = { .dt_id = TEGRA124_CLK_AFI, .present = true },
+ [tegra_clk_csite] = { .dt_id = TEGRA124_CLK_CSITE, .present = true },
+ [tegra_clk_la] = { .dt_id = TEGRA124_CLK_LA, .present = true },
+ [tegra_clk_trace] = { .dt_id = TEGRA124_CLK_TRACE, .present = true },
+ [tegra_clk_soc_therm] = { .dt_id = TEGRA124_CLK_SOC_THERM, .present = true },
+ [tegra_clk_dtv] = { .dt_id = TEGRA124_CLK_DTV, .present = true },
+ [tegra_clk_ndspeed] = { .dt_id = TEGRA124_CLK_NDSPEED, .present = true },
+ [tegra_clk_i2cslow] = { .dt_id = TEGRA124_CLK_I2CSLOW, .present = true },
+ [tegra_clk_dsib] = { .dt_id = TEGRA124_CLK_DSIB, .present = true },
+ [tegra_clk_tsec] = { .dt_id = TEGRA124_CLK_TSEC, .present = true },
+ [tegra_clk_xusb_host] = { .dt_id = TEGRA124_CLK_XUSB_HOST, .present = true },
+ [tegra_clk_msenc] = { .dt_id = TEGRA124_CLK_MSENC, .present = true },
+ [tegra_clk_csus] = { .dt_id = TEGRA124_CLK_CSUS, .present = true },
+ [tegra_clk_mselect] = { .dt_id = TEGRA124_CLK_MSELECT, .present = true },
+ [tegra_clk_tsensor] = { .dt_id = TEGRA124_CLK_TSENSOR, .present = true },
+ [tegra_clk_i2s3] = { .dt_id = TEGRA124_CLK_I2S3, .present = true },
+ [tegra_clk_i2s4] = { .dt_id = TEGRA124_CLK_I2S4, .present = true },
+ [tegra_clk_i2c4] = { .dt_id = TEGRA124_CLK_I2C4, .present = true },
+ [tegra_clk_sbc5] = { .dt_id = TEGRA124_CLK_SBC5, .present = true },
+ [tegra_clk_sbc6] = { .dt_id = TEGRA124_CLK_SBC6, .present = true },
+ [tegra_clk_d_audio] = { .dt_id = TEGRA124_CLK_D_AUDIO, .present = true },
+ [tegra_clk_apbif] = { .dt_id = TEGRA124_CLK_APBIF, .present = true },
+ [tegra_clk_dam0] = { .dt_id = TEGRA124_CLK_DAM0, .present = true },
+ [tegra_clk_dam1] = { .dt_id = TEGRA124_CLK_DAM1, .present = true },
+ [tegra_clk_dam2] = { .dt_id = TEGRA124_CLK_DAM2, .present = true },
+ [tegra_clk_hda2codec_2x] = { .dt_id = TEGRA124_CLK_HDA2CODEC_2X, .present = true },
+ [tegra_clk_audio0_2x] = { .dt_id = TEGRA124_CLK_AUDIO0_2X, .present = true },
+ [tegra_clk_audio1_2x] = { .dt_id = TEGRA124_CLK_AUDIO1_2X, .present = true },
+ [tegra_clk_audio2_2x] = { .dt_id = TEGRA124_CLK_AUDIO2_2X, .present = true },
+ [tegra_clk_audio3_2x] = { .dt_id = TEGRA124_CLK_AUDIO3_2X, .present = true },
+ [tegra_clk_audio4_2x] = { .dt_id = TEGRA124_CLK_AUDIO4_2X, .present = true },
+ [tegra_clk_spdif_2x] = { .dt_id = TEGRA124_CLK_SPDIF_2X, .present = true },
+ [tegra_clk_actmon] = { .dt_id = TEGRA124_CLK_ACTMON, .present = true },
+ [tegra_clk_extern1] = { .dt_id = TEGRA124_CLK_EXTERN1, .present = true },
+ [tegra_clk_extern2] = { .dt_id = TEGRA124_CLK_EXTERN2, .present = true },
+ [tegra_clk_extern3] = { .dt_id = TEGRA124_CLK_EXTERN3, .present = true },
+ [tegra_clk_sata_oob] = { .dt_id = TEGRA124_CLK_SATA_OOB, .present = true },
+ [tegra_clk_sata] = { .dt_id = TEGRA124_CLK_SATA, .present = true },
+ [tegra_clk_hda] = { .dt_id = TEGRA124_CLK_HDA, .present = true },
+ [tegra_clk_se] = { .dt_id = TEGRA124_CLK_SE, .present = true },
+ [tegra_clk_hda2hdmi] = { .dt_id = TEGRA124_CLK_HDA2HDMI, .present = true },
+ [tegra_clk_sata_cold] = { .dt_id = TEGRA124_CLK_SATA_COLD, .present = true },
+ [tegra_clk_cilab] = { .dt_id = TEGRA124_CLK_CILAB, .present = true },
+ [tegra_clk_cilcd] = { .dt_id = TEGRA124_CLK_CILCD, .present = true },
+ [tegra_clk_cile] = { .dt_id = TEGRA124_CLK_CILE, .present = true },
+ [tegra_clk_dsialp] = { .dt_id = TEGRA124_CLK_DSIALP, .present = true },
+ [tegra_clk_dsiblp] = { .dt_id = TEGRA124_CLK_DSIBLP, .present = true },
+ [tegra_clk_entropy] = { .dt_id = TEGRA124_CLK_ENTROPY, .present = true },
+ [tegra_clk_dds] = { .dt_id = TEGRA124_CLK_DDS, .present = true },
+ [tegra_clk_dp2] = { .dt_id = TEGRA124_CLK_DP2, .present = true },
+ [tegra_clk_amx] = { .dt_id = TEGRA124_CLK_AMX, .present = true },
+ [tegra_clk_adx] = { .dt_id = TEGRA124_CLK_ADX, .present = true },
+ [tegra_clk_xusb_ss] = { .dt_id = TEGRA124_CLK_XUSB_SS, .present = true },
+ [tegra_clk_i2c6] = { .dt_id = TEGRA124_CLK_I2C6, .present = true },
+ [tegra_clk_vim2_clk] = { .dt_id = TEGRA124_CLK_VIM2_CLK, .present = true },
+ [tegra_clk_hdmi_audio] = { .dt_id = TEGRA124_CLK_HDMI_AUDIO, .present = true },
+ [tegra_clk_clk72Mhz] = { .dt_id = TEGRA124_CLK_CLK72MHZ, .present = true },
+ [tegra_clk_vic03] = { .dt_id = TEGRA124_CLK_VIC03, .present = true },
+ [tegra_clk_adx1] = { .dt_id = TEGRA124_CLK_ADX1, .present = true },
+ [tegra_clk_dpaux] = { .dt_id = TEGRA124_CLK_DPAUX, .present = true },
+ [tegra_clk_sor0] = { .dt_id = TEGRA124_CLK_SOR0, .present = true },
+ [tegra_clk_sor0_lvds] = { .dt_id = TEGRA124_CLK_SOR0_LVDS, .present = true },
+ [tegra_clk_gpu] = { .dt_id = TEGRA124_CLK_GPU, .present = true },
+ [tegra_clk_amx1] = { .dt_id = TEGRA124_CLK_AMX1, .present = true },
+ [tegra_clk_uartb] = { .dt_id = TEGRA124_CLK_UARTB, .present = true },
+ [tegra_clk_vfir] = { .dt_id = TEGRA124_CLK_VFIR, .present = true },
+ [tegra_clk_spdif_in] = { .dt_id = TEGRA124_CLK_SPDIF_IN, .present = true },
+ [tegra_clk_spdif_out] = { .dt_id = TEGRA124_CLK_SPDIF_OUT, .present = true },
+ [tegra_clk_vi_9] = { .dt_id = TEGRA124_CLK_VI, .present = true },
+ [tegra_clk_vi_sensor] = { .dt_id = TEGRA124_CLK_VI_SENSOR, .present = true },
+ [tegra_clk_fuse] = { .dt_id = TEGRA124_CLK_FUSE, .present = true },
+ [tegra_clk_fuse_burn] = { .dt_id = TEGRA124_CLK_FUSE_BURN, .present = true },
+ [tegra_clk_clk_32k] = { .dt_id = TEGRA124_CLK_CLK_32K, .present = true },
+ [tegra_clk_clk_m] = { .dt_id = TEGRA124_CLK_CLK_M, .present = true },
+ [tegra_clk_clk_m_div2] = { .dt_id = TEGRA124_CLK_CLK_M_DIV2, .present = true },
+ [tegra_clk_clk_m_div4] = { .dt_id = TEGRA124_CLK_CLK_M_DIV4, .present = true },
+ [tegra_clk_pll_ref] = { .dt_id = TEGRA124_CLK_PLL_REF, .present = true },
+ [tegra_clk_pll_c] = { .dt_id = TEGRA124_CLK_PLL_C, .present = true },
+ [tegra_clk_pll_c_out1] = { .dt_id = TEGRA124_CLK_PLL_C_OUT1, .present = true },
+ [tegra_clk_pll_c2] = { .dt_id = TEGRA124_CLK_PLL_C2, .present = true },
+ [tegra_clk_pll_c3] = { .dt_id = TEGRA124_CLK_PLL_C3, .present = true },
+ [tegra_clk_pll_m] = { .dt_id = TEGRA124_CLK_PLL_M, .present = true },
+ [tegra_clk_pll_m_out1] = { .dt_id = TEGRA124_CLK_PLL_M_OUT1, .present = true },
+ [tegra_clk_pll_p] = { .dt_id = TEGRA124_CLK_PLL_P, .present = true },
+ [tegra_clk_pll_p_out1] = { .dt_id = TEGRA124_CLK_PLL_P_OUT1, .present = true },
+ [tegra_clk_pll_p_out2] = { .dt_id = TEGRA124_CLK_PLL_P_OUT2, .present = true },
+ [tegra_clk_pll_p_out3] = { .dt_id = TEGRA124_CLK_PLL_P_OUT3, .present = true },
+ [tegra_clk_pll_p_out4] = { .dt_id = TEGRA124_CLK_PLL_P_OUT4, .present = true },
+ [tegra_clk_pll_a] = { .dt_id = TEGRA124_CLK_PLL_A, .present = true },
+ [tegra_clk_pll_a_out0] = { .dt_id = TEGRA124_CLK_PLL_A_OUT0, .present = true },
+ [tegra_clk_pll_d] = { .dt_id = TEGRA124_CLK_PLL_D, .present = true },
+ [tegra_clk_pll_d_out0] = { .dt_id = TEGRA124_CLK_PLL_D_OUT0, .present = true },
+ [tegra_clk_pll_d2] = { .dt_id = TEGRA124_CLK_PLL_D2, .present = true },
+ [tegra_clk_pll_d2_out0] = { .dt_id = TEGRA124_CLK_PLL_D2_OUT0, .present = true },
+ [tegra_clk_pll_u] = { .dt_id = TEGRA124_CLK_PLL_U, .present = true },
+ [tegra_clk_pll_u_480m] = { .dt_id = TEGRA124_CLK_PLL_U_480M, .present = true },
+ [tegra_clk_pll_u_60m] = { .dt_id = TEGRA124_CLK_PLL_U_60M, .present = true },
+ [tegra_clk_pll_u_48m] = { .dt_id = TEGRA124_CLK_PLL_U_48M, .present = true },
+ [tegra_clk_pll_u_12m] = { .dt_id = TEGRA124_CLK_PLL_U_12M, .present = true },
+ [tegra_clk_pll_x] = { .dt_id = TEGRA124_CLK_PLL_X, .present = true },
+ [tegra_clk_pll_x_out0] = { .dt_id = TEGRA124_CLK_PLL_X_OUT0, .present = true },
+ [tegra_clk_pll_re_vco] = { .dt_id = TEGRA124_CLK_PLL_RE_VCO, .present = true },
+ [tegra_clk_pll_re_out] = { .dt_id = TEGRA124_CLK_PLL_RE_OUT, .present = true },
+ [tegra_clk_spdif_in_sync] = { .dt_id = TEGRA124_CLK_SPDIF_IN_SYNC, .present = true },
+ [tegra_clk_i2s0_sync] = { .dt_id = TEGRA124_CLK_I2S0_SYNC, .present = true },
+ [tegra_clk_i2s1_sync] = { .dt_id = TEGRA124_CLK_I2S1_SYNC, .present = true },
+ [tegra_clk_i2s2_sync] = { .dt_id = TEGRA124_CLK_I2S2_SYNC, .present = true },
+ [tegra_clk_i2s3_sync] = { .dt_id = TEGRA124_CLK_I2S3_SYNC, .present = true },
+ [tegra_clk_i2s4_sync] = { .dt_id = TEGRA124_CLK_I2S4_SYNC, .present = true },
+ [tegra_clk_vimclk_sync] = { .dt_id = TEGRA124_CLK_VIMCLK_SYNC, .present = true },
+ [tegra_clk_audio0] = { .dt_id = TEGRA124_CLK_AUDIO0, .present = true },
+ [tegra_clk_audio1] = { .dt_id = TEGRA124_CLK_AUDIO1, .present = true },
+ [tegra_clk_audio2] = { .dt_id = TEGRA124_CLK_AUDIO2, .present = true },
+ [tegra_clk_audio3] = { .dt_id = TEGRA124_CLK_AUDIO3, .present = true },
+ [tegra_clk_audio4] = { .dt_id = TEGRA124_CLK_AUDIO4, .present = true },
+ [tegra_clk_spdif] = { .dt_id = TEGRA124_CLK_SPDIF, .present = true },
+ [tegra_clk_clk_out_1] = { .dt_id = TEGRA124_CLK_CLK_OUT_1, .present = true },
+ [tegra_clk_clk_out_2] = { .dt_id = TEGRA124_CLK_CLK_OUT_2, .present = true },
+ [tegra_clk_clk_out_3] = { .dt_id = TEGRA124_CLK_CLK_OUT_3, .present = true },
+ [tegra_clk_blink] = { .dt_id = TEGRA124_CLK_BLINK, .present = true },
+ [tegra_clk_xusb_host_src] = { .dt_id = TEGRA124_CLK_XUSB_HOST_SRC, .present = true },
+ [tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true },
+ [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true },
+ [tegra_clk_xusb_ss_src] = { .dt_id = TEGRA124_CLK_XUSB_SS_SRC, .present = true },
+ [tegra_clk_xusb_dev_src] = { .dt_id = TEGRA124_CLK_XUSB_DEV_SRC, .present = true },
+ [tegra_clk_xusb_dev] = { .dt_id = TEGRA124_CLK_XUSB_DEV, .present = true },
+ [tegra_clk_xusb_hs_src] = { .dt_id = TEGRA124_CLK_XUSB_HS_SRC, .present = true },
+ [tegra_clk_sclk] = { .dt_id = TEGRA124_CLK_SCLK, .present = true },
+ [tegra_clk_hclk] = { .dt_id = TEGRA124_CLK_HCLK, .present = true },
+ [tegra_clk_pclk] = { .dt_id = TEGRA124_CLK_PCLK, .present = true },
+ [tegra_clk_cclk_g] = { .dt_id = TEGRA124_CLK_CCLK_G, .present = true },
+ [tegra_clk_cclk_lp] = { .dt_id = TEGRA124_CLK_CCLK_LP, .present = true },
+ [tegra_clk_dfll_ref] = { .dt_id = TEGRA124_CLK_DFLL_REF, .present = true },
+ [tegra_clk_dfll_soc] = { .dt_id = TEGRA124_CLK_DFLL_SOC, .present = true },
+ [tegra_clk_vi_sensor2] = { .dt_id = TEGRA124_CLK_VI_SENSOR2, .present = true },
+ [tegra_clk_pll_p_out5] = { .dt_id = TEGRA124_CLK_PLL_P_OUT5, .present = true },
+ [tegra_clk_pll_c4] = { .dt_id = TEGRA124_CLK_PLL_C4, .present = true },
+ [tegra_clk_pll_dp] = { .dt_id = TEGRA124_CLK_PLL_DP, .present = true },
+ [tegra_clk_audio0_mux] = { .dt_id = TEGRA124_CLK_AUDIO0_MUX, .present = true },
+ [tegra_clk_audio1_mux] = { .dt_id = TEGRA124_CLK_AUDIO1_MUX, .present = true },
+ [tegra_clk_audio2_mux] = { .dt_id = TEGRA124_CLK_AUDIO2_MUX, .present = true },
+ [tegra_clk_audio3_mux] = { .dt_id = TEGRA124_CLK_AUDIO3_MUX, .present = true },
+ [tegra_clk_audio4_mux] = { .dt_id = TEGRA124_CLK_AUDIO4_MUX, .present = true },
+ [tegra_clk_spdif_mux] = { .dt_id = TEGRA124_CLK_SPDIF_MUX, .present = true },
+ [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_1_MUX, .present = true },
+ [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_2_MUX, .present = true },
+ [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true },
+ [tegra_clk_dsia_mux] = { .dt_id = TEGRA124_CLK_DSIA_MUX, .present = true },
+ [tegra_clk_dsib_mux] = { .dt_id = TEGRA124_CLK_DSIB_MUX, .present = true },
+ [tegra_clk_uarte] = { .dt_id = TEGRA124_CLK_UARTE, .present = true },
+};
+
+static struct tegra_devclk devclks[] __initdata = {
+ { .con_id = "clk_m", .dt_id = TEGRA124_CLK_CLK_M },
+ { .con_id = "pll_ref", .dt_id = TEGRA124_CLK_PLL_REF },
+ { .con_id = "clk_32k", .dt_id = TEGRA124_CLK_CLK_32K },
+ { .con_id = "clk_m_div2", .dt_id = TEGRA124_CLK_CLK_M_DIV2 },
+ { .con_id = "clk_m_div4", .dt_id = TEGRA124_CLK_CLK_M_DIV4 },
+ { .con_id = "pll_c", .dt_id = TEGRA124_CLK_PLL_C },
+ { .con_id = "pll_c_out1", .dt_id = TEGRA124_CLK_PLL_C_OUT1 },
+ { .con_id = "pll_c2", .dt_id = TEGRA124_CLK_PLL_C2 },
+ { .con_id = "pll_c3", .dt_id = TEGRA124_CLK_PLL_C3 },
+ { .con_id = "pll_p", .dt_id = TEGRA124_CLK_PLL_P },
+ { .con_id = "pll_p_out1", .dt_id = TEGRA124_CLK_PLL_P_OUT1 },
+ { .con_id = "pll_p_out2", .dt_id = TEGRA124_CLK_PLL_P_OUT2 },
+ { .con_id = "pll_p_out3", .dt_id = TEGRA124_CLK_PLL_P_OUT3 },
+ { .con_id = "pll_p_out4", .dt_id = TEGRA124_CLK_PLL_P_OUT4 },
+ { .con_id = "pll_m", .dt_id = TEGRA124_CLK_PLL_M },
+ { .con_id = "pll_m_out1", .dt_id = TEGRA124_CLK_PLL_M_OUT1 },
+ { .con_id = "pll_x", .dt_id = TEGRA124_CLK_PLL_X },
+ { .con_id = "pll_x_out0", .dt_id = TEGRA124_CLK_PLL_X_OUT0 },
+ { .con_id = "pll_u", .dt_id = TEGRA124_CLK_PLL_U },
+ { .con_id = "pll_u_480M", .dt_id = TEGRA124_CLK_PLL_U_480M },
+ { .con_id = "pll_u_60M", .dt_id = TEGRA124_CLK_PLL_U_60M },
+ { .con_id = "pll_u_48M", .dt_id = TEGRA124_CLK_PLL_U_48M },
+ { .con_id = "pll_u_12M", .dt_id = TEGRA124_CLK_PLL_U_12M },
+ { .con_id = "pll_d", .dt_id = TEGRA124_CLK_PLL_D },
+ { .con_id = "pll_d_out0", .dt_id = TEGRA124_CLK_PLL_D_OUT0 },
+ { .con_id = "pll_d2", .dt_id = TEGRA124_CLK_PLL_D2 },
+ { .con_id = "pll_d2_out0", .dt_id = TEGRA124_CLK_PLL_D2_OUT0 },
+ { .con_id = "pll_a", .dt_id = TEGRA124_CLK_PLL_A },
+ { .con_id = "pll_a_out0", .dt_id = TEGRA124_CLK_PLL_A_OUT0 },
+ { .con_id = "pll_re_vco", .dt_id = TEGRA124_CLK_PLL_RE_VCO },
+ { .con_id = "pll_re_out", .dt_id = TEGRA124_CLK_PLL_RE_OUT },
+ { .con_id = "spdif_in_sync", .dt_id = TEGRA124_CLK_SPDIF_IN_SYNC },
+ { .con_id = "i2s0_sync", .dt_id = TEGRA124_CLK_I2S0_SYNC },
+ { .con_id = "i2s1_sync", .dt_id = TEGRA124_CLK_I2S1_SYNC },
+ { .con_id = "i2s2_sync", .dt_id = TEGRA124_CLK_I2S2_SYNC },
+ { .con_id = "i2s3_sync", .dt_id = TEGRA124_CLK_I2S3_SYNC },
+ { .con_id = "i2s4_sync", .dt_id = TEGRA124_CLK_I2S4_SYNC },
+ { .con_id = "vimclk_sync", .dt_id = TEGRA124_CLK_VIMCLK_SYNC },
+ { .con_id = "audio0", .dt_id = TEGRA124_CLK_AUDIO0 },
+ { .con_id = "audio1", .dt_id = TEGRA124_CLK_AUDIO1 },
+ { .con_id = "audio2", .dt_id = TEGRA124_CLK_AUDIO2 },
+ { .con_id = "audio3", .dt_id = TEGRA124_CLK_AUDIO3 },
+ { .con_id = "audio4", .dt_id = TEGRA124_CLK_AUDIO4 },
+ { .con_id = "spdif", .dt_id = TEGRA124_CLK_SPDIF },
+ { .con_id = "audio0_2x", .dt_id = TEGRA124_CLK_AUDIO0_2X },
+ { .con_id = "audio1_2x", .dt_id = TEGRA124_CLK_AUDIO1_2X },
+ { .con_id = "audio2_2x", .dt_id = TEGRA124_CLK_AUDIO2_2X },
+ { .con_id = "audio3_2x", .dt_id = TEGRA124_CLK_AUDIO3_2X },
+ { .con_id = "audio4_2x", .dt_id = TEGRA124_CLK_AUDIO4_2X },
+ { .con_id = "spdif_2x", .dt_id = TEGRA124_CLK_SPDIF_2X },
+ { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA124_CLK_EXTERN1 },
+ { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA124_CLK_EXTERN2 },
+ { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA124_CLK_EXTERN3 },
+ { .con_id = "blink", .dt_id = TEGRA124_CLK_BLINK },
+ { .con_id = "cclk_g", .dt_id = TEGRA124_CLK_CCLK_G },
+ { .con_id = "cclk_lp", .dt_id = TEGRA124_CLK_CCLK_LP },
+ { .con_id = "sclk", .dt_id = TEGRA124_CLK_SCLK },
+ { .con_id = "hclk", .dt_id = TEGRA124_CLK_HCLK },
+ { .con_id = "pclk", .dt_id = TEGRA124_CLK_PCLK },
+ { .con_id = "fuse", .dt_id = TEGRA124_CLK_FUSE },
+ { .dev_id = "rtc-tegra", .dt_id = TEGRA124_CLK_RTC },
+ { .dev_id = "timer", .dt_id = TEGRA124_CLK_TIMER },
+};
+
+static struct clk **clks;
+
+static void tegra124_utmi_param_configure(void __iomem *clk_base)
+{
+ u32 reg;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (osc_freq == utmi_parameters[i].osc_frequency)
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(utmi_parameters)) {
+ pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
+ osc_freq);
+ return;
+ }
+
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL stable and active counts */
+ /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
+ reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
+
+ reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
+ active_delay_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
+ enable_delay_count);
+
+ reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
+ xtal_freq_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
+
+ /* Setup HW control of UTMIPLL */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
+ reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
+ reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
+
+ udelay(1);
+
+ /* Setup SW override of UTMIPLL assuming USB2.0
+ ports are assigned to USB2 */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
+ reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+
+ udelay(1);
+
+ /* Enable HW control UTMIPLL */
+ reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
+ reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
+ writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
+}
+
+static __init void tegra124_periph_clk_init(void __iomem *clk_base,
+ void __iomem *pmc_base)
+{
+ struct clk *clk;
+ u32 val;
+
+ /* xusb_hs_src */
+ val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
+ val |= BIT(25); /* always select PLLU_60M */
+ writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC);
+
+ clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
+ 1, 1);
+ clks[TEGRA124_CLK_XUSB_HS_SRC] = clk;
+
+ /* dsia mux */
+ clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0), 0,
+ clk_base + PLLD_BASE, 25, 1, 0, &pll_d_lock);
+ clks[TEGRA124_CLK_DSIA_MUX] = clk;
+
+ /* dsib mux */
+ clk = clk_register_mux(NULL, "dsib_mux", mux_plld_out0_plld2_out0,
+ ARRAY_SIZE(mux_plld_out0_plld2_out0), 0,
+ clk_base + PLLD2_BASE, 25, 1, 0, &pll_d2_lock);
+ clks[TEGRA124_CLK_DSIB_MUX] = clk;
+
+ /* emc mux */
+ clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
+ ARRAY_SIZE(mux_pllmcp_clkm), 0,
+ clk_base + CLK_SOURCE_EMC,
+ 29, 3, 0, NULL);
+
+ /* cml0 */
+ clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
+ 0, 0, &pll_e_lock);
+ clk_register_clkdev(clk, "cml0", NULL);
+ clks[TEGRA124_CLK_CML0] = clk;
+
+ /* cml1 */
+ clk = clk_register_gate(NULL, "cml1", "pll_e", 0, clk_base + PLLE_AUX,
+ 1, 0, &pll_e_lock);
+ clk_register_clkdev(clk, "cml1", NULL);
+ clks[TEGRA124_CLK_CML1] = clk;
+
+ tegra_periph_clk_init(clk_base, pmc_base, tegra124_clks, &pll_p_params);
+}
+
+static void __init tegra124_pll_init(void __iomem *clk_base,
+ void __iomem *pmc)
+{
+ u32 val;
+ struct clk *clk;
+
+ /* PLLC */
+ clk = tegra_clk_register_pllxc("pll_c", "pll_ref", clk_base,
+ pmc, 0, &pll_c_params, NULL);
+ clk_register_clkdev(clk, "pll_c", NULL);
+ clks[TEGRA124_CLK_PLL_C] = clk;
+
+ /* PLLC_OUT1 */
+ clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
+ clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
+ clk_base + PLLC_OUT, 1, 0,
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_c_out1", NULL);
+ clks[TEGRA124_CLK_PLL_C_OUT1] = clk;
+
+ /* PLLC2 */
+ clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0,
+ &pll_c2_params, NULL);
+ clk_register_clkdev(clk, "pll_c2", NULL);
+ clks[TEGRA124_CLK_PLL_C2] = clk;
+
+ /* PLLC3 */
+ clk = tegra_clk_register_pllc("pll_c3", "pll_ref", clk_base, pmc, 0,
+ &pll_c3_params, NULL);
+ clk_register_clkdev(clk, "pll_c3", NULL);
+ clks[TEGRA124_CLK_PLL_C3] = clk;
+
+ /* PLLM */
+ clk = tegra_clk_register_pllm("pll_m", "pll_ref", clk_base, pmc,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+ &pll_m_params, NULL);
+ clk_register_clkdev(clk, "pll_m", NULL);
+ clks[TEGRA124_CLK_PLL_M] = clk;
+
+ /* PLLM_OUT1 */
+ clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
+ clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
+ 8, 8, 1, NULL);
+ clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
+ clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
+ CLK_SET_RATE_PARENT, 0, NULL);
+ clk_register_clkdev(clk, "pll_m_out1", NULL);
+ clks[TEGRA124_CLK_PLL_M_OUT1] = clk;
+
+ /* PLLM_UD */
+ clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m",
+ CLK_SET_RATE_PARENT, 1, 1);
+
+ /* PLLU */
+ val = readl(clk_base + pll_u_params.base_reg);
+ val &= ~BIT(24); /* disable PLLU_OVERRIDE */
+ writel(val, clk_base + pll_u_params.base_reg);
+
+ clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
+ &pll_u_params, &pll_u_lock);
+ clk_register_clkdev(clk, "pll_u", NULL);
+ clks[TEGRA124_CLK_PLL_U] = clk;
+
+ tegra124_utmi_param_configure(clk_base);
+
+ /* PLLU_480M */
+ clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
+ CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
+ 22, 0, &pll_u_lock);
+ clk_register_clkdev(clk, "pll_u_480M", NULL);
+ clks[TEGRA124_CLK_PLL_U_480M] = clk;
+
+ /* PLLU_60M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_60M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 8);
+ clk_register_clkdev(clk, "pll_u_60M", NULL);
+ clks[TEGRA124_CLK_PLL_U_60M] = clk;
+
+ /* PLLU_48M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_48M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 10);
+ clk_register_clkdev(clk, "pll_u_48M", NULL);
+ clks[TEGRA124_CLK_PLL_U_48M] = clk;
+
+ /* PLLU_12M */
+ clk = clk_register_fixed_factor(NULL, "pll_u_12M", "pll_u",
+ CLK_SET_RATE_PARENT, 1, 40);
+ clk_register_clkdev(clk, "pll_u_12M", NULL);
+ clks[TEGRA124_CLK_PLL_U_12M] = clk;
+
+ /* PLLD */
+ clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0,
+ &pll_d_params, &pll_d_lock);
+ clk_register_clkdev(clk, "pll_d", NULL);
+ clks[TEGRA124_CLK_PLL_D] = clk;
+
+ /* PLLD_OUT0 */
+ clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d_out0", NULL);
+ clks[TEGRA124_CLK_PLL_D_OUT0] = clk;
+
+ /* PLLRE */
+ clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc,
+ 0, &pll_re_vco_params, &pll_re_lock, pll_ref_freq);
+ clk_register_clkdev(clk, "pll_re_vco", NULL);
+ clks[TEGRA124_CLK_PLL_RE_VCO] = clk;
+
+ clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0,
+ clk_base + PLLRE_BASE, 16, 4, 0,
+ pll_re_div_table, &pll_re_lock);
+ clk_register_clkdev(clk, "pll_re_out", NULL);
+ clks[TEGRA124_CLK_PLL_RE_OUT] = clk;
+
+ /* PLLE */
+ clk = tegra_clk_register_plle_tegra114("pll_e", "pll_ref",
+ clk_base, 0, &pll_e_params, NULL);
+ clk_register_clkdev(clk, "pll_e", NULL);
+ clks[TEGRA124_CLK_PLL_E] = clk;
+
+ /* PLLC4 */
+ clk = tegra_clk_register_pllss("pll_c4", "pll_ref", clk_base, 0,
+ &pll_c4_params, NULL);
+ clk_register_clkdev(clk, "pll_c4", NULL);
+ clks[TEGRA124_CLK_PLL_C4] = clk;
+
+ /* PLLDP */
+ clk = tegra_clk_register_pllss("pll_dp", "pll_ref", clk_base, 0,
+ &pll_dp_params, NULL);
+ clk_register_clkdev(clk, "pll_dp", NULL);
+ clks[TEGRA124_CLK_PLL_DP] = clk;
+
+ /* PLLD2 */
+ clk = tegra_clk_register_pllss("pll_d2", "pll_ref", clk_base, 0,
+ &tegra124_pll_d2_params, NULL);
+ clk_register_clkdev(clk, "pll_d2", NULL);
+ clks[TEGRA124_CLK_PLL_D2] = clk;
+
+ /* PLLD2_OUT0 ?? */
+ clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
+ CLK_SET_RATE_PARENT, 1, 2);
+ clk_register_clkdev(clk, "pll_d2_out0", NULL);
+ clks[TEGRA124_CLK_PLL_D2_OUT0] = clk;
+
+}
+
+/* Tegra124 CPU clock and reset control functions */
+static void tegra124_wait_cpu_in_reset(u32 cpu)
+{
+ unsigned int reg;
+
+ do {
+ reg = readl(clk_base + CLK_RST_CONTROLLER_CPU_CMPLX_STATUS);
+ cpu_relax();
+ } while (!(reg & (1 << cpu))); /* check CPU been reset or not */
+}
+
+static void tegra124_disable_cpu_clock(u32 cpu)
+{
+ /* flow controller would take care in the power sequence. */
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void tegra124_cpu_clock_suspend(void)
+{
+ /* switch coresite to clk_m, save off original source */
+ tegra124_cpu_clk_sctx.clk_csite_src =
+ readl(clk_base + CLK_SOURCE_CSITE);
+ writel(3 << 30, clk_base + CLK_SOURCE_CSITE);
+}
+
+static void tegra124_cpu_clock_resume(void)
+{
+ writel(tegra124_cpu_clk_sctx.clk_csite_src,
+ clk_base + CLK_SOURCE_CSITE);
+}
+#endif
+
+static struct tegra_cpu_car_ops tegra124_cpu_car_ops = {
+ .wait_for_reset = tegra124_wait_cpu_in_reset,
+ .disable_clock = tegra124_disable_cpu_clock,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = tegra124_cpu_clock_suspend,
+ .resume = tegra124_cpu_clock_resume,
+#endif
+};
+
+static const struct of_device_id pmc_match[] __initconst = {
+ { .compatible = "nvidia,tegra124-pmc" },
+ {},
+};
+
+static struct tegra_clk_init_table init_table[] __initdata = {
+ {TEGRA124_CLK_UARTA, TEGRA124_CLK_PLL_P, 408000000, 0},
+ {TEGRA124_CLK_UARTB, TEGRA124_CLK_PLL_P, 408000000, 0},
+ {TEGRA124_CLK_UARTC, TEGRA124_CLK_PLL_P, 408000000, 0},
+ {TEGRA124_CLK_UARTD, TEGRA124_CLK_PLL_P, 408000000, 0},
+ {TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 1},
+ {TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 1},
+ {TEGRA124_CLK_EXTERN1, TEGRA124_CLK_PLL_A_OUT0, 0, 1},
+ {TEGRA124_CLK_CLK_OUT_1_MUX, TEGRA124_CLK_EXTERN1, 0, 1},
+ {TEGRA124_CLK_CLK_OUT_1, TEGRA124_CLK_CLK_MAX, 0, 1},
+ {TEGRA124_CLK_I2S0, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA124_CLK_I2S1, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA124_CLK_I2S2, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA124_CLK_I2S3, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA124_CLK_I2S4, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA124_CLK_VDE, TEGRA124_CLK_PLL_P, 0, 0},
+ {TEGRA124_CLK_HOST1X, TEGRA124_CLK_PLL_P, 136000000, 1},
+ {TEGRA124_CLK_SCLK, TEGRA124_CLK_PLL_P_OUT2, 102000000, 1},
+ {TEGRA124_CLK_DFLL_SOC, TEGRA124_CLK_PLL_P, 51000000, 1},
+ {TEGRA124_CLK_DFLL_REF, TEGRA124_CLK_PLL_P, 51000000, 1},
+ {TEGRA124_CLK_PLL_C, TEGRA124_CLK_CLK_MAX, 768000000, 0},
+ {TEGRA124_CLK_PLL_C_OUT1, TEGRA124_CLK_CLK_MAX, 100000000, 0},
+ {TEGRA124_CLK_SBC4, TEGRA124_CLK_PLL_P, 12000000, 1},
+ {TEGRA124_CLK_TSEC, TEGRA124_CLK_PLL_C3, 0, 0},
+ {TEGRA124_CLK_MSENC, TEGRA124_CLK_PLL_C3, 0, 0},
+ /* This MUST be the last entry. */
+ {TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0},
+};
+
+static void __init tegra124_clock_apply_init_table(void)
+{
+ tegra_init_from_table(init_table, clks, TEGRA124_CLK_CLK_MAX);
+}
+
+static void __init tegra124_clock_init(struct device_node *np)
+{
+ struct device_node *node;
+
+ clk_base = of_iomap(np, 0);
+ if (!clk_base) {
+ pr_err("ioremap tegra124 CAR failed\n");
+ return;
+ }
+
+ node = of_find_matching_node(NULL, pmc_match);
+ if (!node) {
+ pr_err("Failed to find pmc node\n");
+ WARN_ON(1);
+ return;
+ }
+
+ pmc_base = of_iomap(node, 0);
+ if (!pmc_base) {
+ pr_err("Can't map pmc registers\n");
+ WARN_ON(1);
+ return;
+ }
+
+ clks = tegra_clk_init(clk_base, TEGRA124_CLK_CLK_MAX, 6);
+ if (!clks)
+ return;
+
+ if (tegra_osc_clk_init(clk_base, tegra124_clks, tegra124_input_freq,
+ ARRAY_SIZE(tegra124_input_freq), &osc_freq, &pll_ref_freq) < 0)
+ return;
+
+ tegra_fixed_clk_init(tegra124_clks);
+ tegra124_pll_init(clk_base, pmc_base);
+ tegra124_periph_clk_init(clk_base, pmc_base);
+ tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks, &pll_a_params);
+ tegra_pmc_clk_init(pmc_base, tegra124_clks);
+
+ tegra_super_clk_gen4_init(clk_base, pmc_base, tegra124_clks,
+ &pll_x_params);
+ tegra_add_of_provider(np);
+ tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
+
+ tegra_clk_apply_init_table = tegra124_clock_apply_init_table;
+
+ tegra_cpu_car_ops = &tegra124_cpu_car_ops;
+}
+CLK_OF_DECLARE(tegra124, "nvidia,tegra124-car", tegra124_clock_init);
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 056f649..dbace15 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -22,30 +22,10 @@
#include <linux/of_address.h>
#include <linux/clk/tegra.h>
#include <linux/delay.h>
+#include <dt-bindings/clock/tegra20-car.h>
#include "clk.h"
-
-#define RST_DEVICES_L 0x004
-#define RST_DEVICES_H 0x008
-#define RST_DEVICES_U 0x00c
-#define RST_DEVICES_SET_L 0x300
-#define RST_DEVICES_CLR_L 0x304
-#define RST_DEVICES_SET_H 0x308
-#define RST_DEVICES_CLR_H 0x30c
-#define RST_DEVICES_SET_U 0x310
-#define RST_DEVICES_CLR_U 0x314
-#define RST_DEVICES_NUM 3
-
-#define CLK_OUT_ENB_L 0x010
-#define CLK_OUT_ENB_H 0x014
-#define CLK_OUT_ENB_U 0x018
-#define CLK_OUT_ENB_SET_L 0x320
-#define CLK_OUT_ENB_CLR_L 0x324
-#define CLK_OUT_ENB_SET_H 0x328
-#define CLK_OUT_ENB_CLR_H 0x32c
-#define CLK_OUT_ENB_SET_U 0x330
-#define CLK_OUT_ENB_CLR_U 0x334
-#define CLK_OUT_ENB_NUM 3
+#include "clk-id.h"
#define OSC_CTRL 0x50
#define OSC_CTRL_OSC_FREQ_MASK (3<<30)
@@ -67,6 +47,8 @@
#define OSC_FREQ_DET_BUSY (1<<31)
#define OSC_FREQ_DET_CNT_MASK 0xFFFF
+#define TEGRA20_CLK_PERIPH_BANKS 3
+
#define PLLS_BASE 0xf0
#define PLLS_MISC 0xf4
#define PLLC_BASE 0x80
@@ -114,34 +96,15 @@
#define CLK_SOURCE_I2S1 0x100
#define CLK_SOURCE_I2S2 0x104
-#define CLK_SOURCE_SPDIF_OUT 0x108
-#define CLK_SOURCE_SPDIF_IN 0x10c
#define CLK_SOURCE_PWM 0x110
#define CLK_SOURCE_SPI 0x114
-#define CLK_SOURCE_SBC1 0x134
-#define CLK_SOURCE_SBC2 0x118
-#define CLK_SOURCE_SBC3 0x11c
-#define CLK_SOURCE_SBC4 0x1b4
#define CLK_SOURCE_XIO 0x120
#define CLK_SOURCE_TWC 0x12c
#define CLK_SOURCE_IDE 0x144
-#define CLK_SOURCE_NDFLASH 0x160
-#define CLK_SOURCE_VFIR 0x168
-#define CLK_SOURCE_SDMMC1 0x150
-#define CLK_SOURCE_SDMMC2 0x154
-#define CLK_SOURCE_SDMMC3 0x1bc
-#define CLK_SOURCE_SDMMC4 0x164
-#define CLK_SOURCE_CVE 0x140
-#define CLK_SOURCE_TVO 0x188
-#define CLK_SOURCE_TVDAC 0x194
#define CLK_SOURCE_HDMI 0x18c
#define CLK_SOURCE_DISP1 0x138
#define CLK_SOURCE_DISP2 0x13c
#define CLK_SOURCE_CSITE 0x1d4
-#define CLK_SOURCE_LA 0x1f8
-#define CLK_SOURCE_OWR 0x1cc
-#define CLK_SOURCE_NOR 0x1d0
-#define CLK_SOURCE_MIPI 0x174
#define CLK_SOURCE_I2C1 0x124
#define CLK_SOURCE_I2C2 0x198
#define CLK_SOURCE_I2C3 0x1b8
@@ -151,24 +114,10 @@
#define CLK_SOURCE_UARTC 0x1a0
#define CLK_SOURCE_UARTD 0x1c0
#define CLK_SOURCE_UARTE 0x1c4
-#define CLK_SOURCE_3D 0x158
-#define CLK_SOURCE_2D 0x15c
-#define CLK_SOURCE_MPE 0x170
-#define CLK_SOURCE_EPP 0x16c
-#define CLK_SOURCE_HOST1X 0x180
-#define CLK_SOURCE_VDE 0x1c8
-#define CLK_SOURCE_VI 0x148
-#define CLK_SOURCE_VI_SENSOR 0x1a8
#define CLK_SOURCE_EMC 0x19c
#define AUDIO_SYNC_CLK 0x38
-#define PMC_CTRL 0x0
-#define PMC_CTRL_BLINK_ENB 7
-#define PMC_DPD_PADS_ORIDE 0x1c
-#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
-#define PMC_BLINK_TIMER 0x40
-
/* Tegra CPU clock and reset control regs */
#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
@@ -188,64 +137,32 @@
} tegra20_cpu_clk_sctx;
#endif
-static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
-
static void __iomem *clk_base;
static void __iomem *pmc_base;
-static DEFINE_SPINLOCK(pll_div_lock);
-static DEFINE_SPINLOCK(sysrate_lock);
-
-#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
+#define TEGRA_INIT_DATA_MUX(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, \
- _regs, _clk_num, periph_clk_enb_refcnt, \
+ _clk_num, \
_gate_flags, _clk_id)
-#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- 30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+#define TEGRA_INIT_DATA_DIV16(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
+ 30, 2, 0, 0, 16, 0, TEGRA_DIVIDER_ROUND_UP, \
+ _clk_num, _gate_flags, \
_clk_id)
-#define TEGRA_INIT_DATA_DIV16(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- 30, 2, 0, 0, 16, 0, TEGRA_DIVIDER_ROUND_UP, _regs, \
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
- _clk_id)
-
-#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \
- _mux_shift, _mux_width, _clk_num, _regs, \
+#define TEGRA_INIT_DATA_NODIV(_name, _parents, _offset, \
+ _mux_shift, _mux_width, _clk_num, \
_gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- _mux_shift, _mux_width, 0, 0, 0, 0, 0, _regs, \
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
+ _mux_shift, _mux_width, 0, 0, 0, 0, 0, \
+ _clk_num, _gate_flags, \
_clk_id)
-/* IDs assigned here must be in sync with DT bindings definition
- * for Tegra20 clocks .
- */
-enum tegra20_clk {
- cpu, ac97 = 3, rtc, timer, uarta, gpio = 8, sdmmc2, i2s1 = 11, i2c1,
- ndflash, sdmmc1, sdmmc4, twc, pwm, i2s2, epp, gr2d = 21, usbd, isp,
- gr3d, ide, disp2, disp1, host1x, vcp, cache2 = 31, mem, ahbdma, apbdma,
- kbc = 36, stat_mon, pmc, fuse, kfuse, sbc1, nor, spi, sbc2, xio, sbc3,
- dvc, dsi, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2,
- usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
- pex, owr, afi, csite, pcie_xclk, avpucq = 75, la, irama = 84, iramb,
- iramc, iramd, cram2, audio_2x, clk_d, csus = 92, cdev2, cdev1,
- uartb = 96, vfir, spdif_in, spdif_out, vi, vi_sensor, tvo, cve,
- osc, clk_32k, clk_m, sclk, cclk, hclk, pclk, blink, pll_a, pll_a_out0,
- pll_c, pll_c_out1, pll_d, pll_d_out0, pll_e, pll_m, pll_m_out1,
- pll_p, pll_p_out1, pll_p_out2, pll_p_out3, pll_p_out4, pll_s, pll_u,
- pll_x, cop, audio, pll_ref, twd, clk_max,
-};
-
-static struct clk *clks[clk_max];
-static struct clk_onecell_data clk_data;
+static struct clk **clks;
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
{ 12000000, 600000000, 600, 12, 0, 8 },
@@ -383,6 +300,8 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_c_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON,
};
static struct tegra_clk_pll_params pll_m_params = {
@@ -397,6 +316,8 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_m_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON,
};
static struct tegra_clk_pll_params pll_p_params = {
@@ -411,6 +332,9 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_p_freq_table,
+ .flags = TEGRA_PLL_FIXED | TEGRA_PLL_HAS_CPCON,
+ .fixed_rate = 216000000,
};
static struct tegra_clk_pll_params pll_a_params = {
@@ -425,6 +349,8 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_a_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON,
};
static struct tegra_clk_pll_params pll_d_params = {
@@ -439,6 +365,8 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .freq_table = pll_d_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON,
};
static struct pdiv_map pllu_p[] = {
@@ -460,6 +388,8 @@
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
.pdiv_tohw = pllu_p,
+ .freq_table = pll_u_freq_table,
+ .flags = TEGRA_PLLU | TEGRA_PLL_HAS_CPCON,
};
static struct tegra_clk_pll_params pll_x_params = {
@@ -474,6 +404,8 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_x_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON,
};
static struct tegra_clk_pll_params pll_e_params = {
@@ -488,34 +420,160 @@
.lock_mask = PLLE_MISC_LOCK,
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 0,
+ .freq_table = pll_e_freq_table,
+ .flags = TEGRA_PLL_FIXED,
+ .fixed_rate = 100000000,
};
-/* Peripheral clock registers */
-static struct tegra_clk_periph_regs periph_l_regs = {
- .enb_reg = CLK_OUT_ENB_L,
- .enb_set_reg = CLK_OUT_ENB_SET_L,
- .enb_clr_reg = CLK_OUT_ENB_CLR_L,
- .rst_reg = RST_DEVICES_L,
- .rst_set_reg = RST_DEVICES_SET_L,
- .rst_clr_reg = RST_DEVICES_CLR_L,
+static struct tegra_devclk devclks[] __initdata = {
+ { .con_id = "pll_c", .dt_id = TEGRA20_CLK_PLL_C },
+ { .con_id = "pll_c_out1", .dt_id = TEGRA20_CLK_PLL_C_OUT1 },
+ { .con_id = "pll_p", .dt_id = TEGRA20_CLK_PLL_P },
+ { .con_id = "pll_p_out1", .dt_id = TEGRA20_CLK_PLL_P_OUT1 },
+ { .con_id = "pll_p_out2", .dt_id = TEGRA20_CLK_PLL_P_OUT2 },
+ { .con_id = "pll_p_out3", .dt_id = TEGRA20_CLK_PLL_P_OUT3 },
+ { .con_id = "pll_p_out4", .dt_id = TEGRA20_CLK_PLL_P_OUT4 },
+ { .con_id = "pll_m", .dt_id = TEGRA20_CLK_PLL_M },
+ { .con_id = "pll_m_out1", .dt_id = TEGRA20_CLK_PLL_M_OUT1 },
+ { .con_id = "pll_x", .dt_id = TEGRA20_CLK_PLL_X },
+ { .con_id = "pll_u", .dt_id = TEGRA20_CLK_PLL_U },
+ { .con_id = "pll_d", .dt_id = TEGRA20_CLK_PLL_D },
+ { .con_id = "pll_d_out0", .dt_id = TEGRA20_CLK_PLL_D_OUT0 },
+ { .con_id = "pll_a", .dt_id = TEGRA20_CLK_PLL_A },
+ { .con_id = "pll_a_out0", .dt_id = TEGRA20_CLK_PLL_A_OUT0 },
+ { .con_id = "pll_e", .dt_id = TEGRA20_CLK_PLL_E },
+ { .con_id = "cclk", .dt_id = TEGRA20_CLK_CCLK },
+ { .con_id = "sclk", .dt_id = TEGRA20_CLK_SCLK },
+ { .con_id = "hclk", .dt_id = TEGRA20_CLK_HCLK },
+ { .con_id = "pclk", .dt_id = TEGRA20_CLK_PCLK },
+ { .con_id = "fuse", .dt_id = TEGRA20_CLK_FUSE },
+ { .con_id = "twd", .dt_id = TEGRA20_CLK_TWD },
+ { .con_id = "audio", .dt_id = TEGRA20_CLK_AUDIO },
+ { .con_id = "audio_2x", .dt_id = TEGRA20_CLK_AUDIO_2X },
+ { .dev_id = "tegra20-ac97", .dt_id = TEGRA20_CLK_AC97 },
+ { .dev_id = "tegra-apbdma", .dt_id = TEGRA20_CLK_APBDMA },
+ { .dev_id = "rtc-tegra", .dt_id = TEGRA20_CLK_RTC },
+ { .dev_id = "timer", .dt_id = TEGRA20_CLK_TIMER },
+ { .dev_id = "tegra-kbc", .dt_id = TEGRA20_CLK_KBC },
+ { .con_id = "csus", .dev_id = "tegra_camera", .dt_id = TEGRA20_CLK_CSUS },
+ { .con_id = "vcp", .dev_id = "tegra-avp", .dt_id = TEGRA20_CLK_VCP },
+ { .con_id = "bsea", .dev_id = "tegra-avp", .dt_id = TEGRA20_CLK_BSEA },
+ { .con_id = "bsev", .dev_id = "tegra-aes", .dt_id = TEGRA20_CLK_BSEV },
+ { .con_id = "emc", .dt_id = TEGRA20_CLK_EMC },
+ { .dev_id = "fsl-tegra-udc", .dt_id = TEGRA20_CLK_USBD },
+ { .dev_id = "tegra-ehci.1", .dt_id = TEGRA20_CLK_USB2 },
+ { .dev_id = "tegra-ehci.2", .dt_id = TEGRA20_CLK_USB3 },
+ { .dev_id = "dsi", .dt_id = TEGRA20_CLK_DSI },
+ { .con_id = "csi", .dev_id = "tegra_camera", .dt_id = TEGRA20_CLK_CSI },
+ { .con_id = "isp", .dev_id = "tegra_camera", .dt_id = TEGRA20_CLK_ISP },
+ { .con_id = "pex", .dt_id = TEGRA20_CLK_PEX },
+ { .con_id = "afi", .dt_id = TEGRA20_CLK_AFI },
+ { .con_id = "cdev1", .dt_id = TEGRA20_CLK_CDEV1 },
+ { .con_id = "cdev2", .dt_id = TEGRA20_CLK_CDEV2 },
+ { .con_id = "clk_32k", .dt_id = TEGRA20_CLK_CLK_32K },
+ { .con_id = "blink", .dt_id = TEGRA20_CLK_BLINK },
+ { .con_id = "clk_m", .dt_id = TEGRA20_CLK_CLK_M },
+ { .con_id = "pll_ref", .dt_id = TEGRA20_CLK_PLL_REF },
+ { .dev_id = "tegra20-i2s.0", .dt_id = TEGRA20_CLK_I2S1 },
+ { .dev_id = "tegra20-i2s.1", .dt_id = TEGRA20_CLK_I2S2 },
+ { .con_id = "spdif_out", .dev_id = "tegra20-spdif", .dt_id = TEGRA20_CLK_SPDIF_OUT },
+ { .con_id = "spdif_in", .dev_id = "tegra20-spdif", .dt_id = TEGRA20_CLK_SPDIF_IN },
+ { .dev_id = "spi_tegra.0", .dt_id = TEGRA20_CLK_SBC1 },
+ { .dev_id = "spi_tegra.1", .dt_id = TEGRA20_CLK_SBC2 },
+ { .dev_id = "spi_tegra.2", .dt_id = TEGRA20_CLK_SBC3 },
+ { .dev_id = "spi_tegra.3", .dt_id = TEGRA20_CLK_SBC4 },
+ { .dev_id = "spi", .dt_id = TEGRA20_CLK_SPI },
+ { .dev_id = "xio", .dt_id = TEGRA20_CLK_XIO },
+ { .dev_id = "twc", .dt_id = TEGRA20_CLK_TWC },
+ { .dev_id = "ide", .dt_id = TEGRA20_CLK_IDE },
+ { .dev_id = "tegra_nand", .dt_id = TEGRA20_CLK_NDFLASH },
+ { .dev_id = "vfir", .dt_id = TEGRA20_CLK_VFIR },
+ { .dev_id = "csite", .dt_id = TEGRA20_CLK_CSITE },
+ { .dev_id = "la", .dt_id = TEGRA20_CLK_LA },
+ { .dev_id = "tegra_w1", .dt_id = TEGRA20_CLK_OWR },
+ { .dev_id = "mipi", .dt_id = TEGRA20_CLK_MIPI },
+ { .dev_id = "vde", .dt_id = TEGRA20_CLK_VDE },
+ { .con_id = "vi", .dev_id = "tegra_camera", .dt_id = TEGRA20_CLK_VI },
+ { .dev_id = "epp", .dt_id = TEGRA20_CLK_EPP },
+ { .dev_id = "mpe", .dt_id = TEGRA20_CLK_MPE },
+ { .dev_id = "host1x", .dt_id = TEGRA20_CLK_HOST1X },
+ { .dev_id = "3d", .dt_id = TEGRA20_CLK_GR3D },
+ { .dev_id = "2d", .dt_id = TEGRA20_CLK_GR2D },
+ { .dev_id = "tegra-nor", .dt_id = TEGRA20_CLK_NOR },
+ { .dev_id = "sdhci-tegra.0", .dt_id = TEGRA20_CLK_SDMMC1 },
+ { .dev_id = "sdhci-tegra.1", .dt_id = TEGRA20_CLK_SDMMC2 },
+ { .dev_id = "sdhci-tegra.2", .dt_id = TEGRA20_CLK_SDMMC3 },
+ { .dev_id = "sdhci-tegra.3", .dt_id = TEGRA20_CLK_SDMMC4 },
+ { .dev_id = "cve", .dt_id = TEGRA20_CLK_CVE },
+ { .dev_id = "tvo", .dt_id = TEGRA20_CLK_TVO },
+ { .dev_id = "tvdac", .dt_id = TEGRA20_CLK_TVDAC },
+ { .con_id = "vi_sensor", .dev_id = "tegra_camera", .dt_id = TEGRA20_CLK_VI_SENSOR },
+ { .dev_id = "hdmi", .dt_id = TEGRA20_CLK_HDMI },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.0", .dt_id = TEGRA20_CLK_I2C1 },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.1", .dt_id = TEGRA20_CLK_I2C2 },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.2", .dt_id = TEGRA20_CLK_I2C3 },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.3", .dt_id = TEGRA20_CLK_DVC },
+ { .dev_id = "tegra-pwm", .dt_id = TEGRA20_CLK_PWM },
+ { .dev_id = "tegra_uart.0", .dt_id = TEGRA20_CLK_UARTA },
+ { .dev_id = "tegra_uart.1", .dt_id = TEGRA20_CLK_UARTB },
+ { .dev_id = "tegra_uart.2", .dt_id = TEGRA20_CLK_UARTC },
+ { .dev_id = "tegra_uart.3", .dt_id = TEGRA20_CLK_UARTD },
+ { .dev_id = "tegra_uart.4", .dt_id = TEGRA20_CLK_UARTE },
+ { .dev_id = "tegradc.0", .dt_id = TEGRA20_CLK_DISP1 },
+ { .dev_id = "tegradc.1", .dt_id = TEGRA20_CLK_DISP2 },
};
-static struct tegra_clk_periph_regs periph_h_regs = {
- .enb_reg = CLK_OUT_ENB_H,
- .enb_set_reg = CLK_OUT_ENB_SET_H,
- .enb_clr_reg = CLK_OUT_ENB_CLR_H,
- .rst_reg = RST_DEVICES_H,
- .rst_set_reg = RST_DEVICES_SET_H,
- .rst_clr_reg = RST_DEVICES_CLR_H,
-};
-
-static struct tegra_clk_periph_regs periph_u_regs = {
- .enb_reg = CLK_OUT_ENB_U,
- .enb_set_reg = CLK_OUT_ENB_SET_U,
- .enb_clr_reg = CLK_OUT_ENB_CLR_U,
- .rst_reg = RST_DEVICES_U,
- .rst_set_reg = RST_DEVICES_SET_U,
- .rst_clr_reg = RST_DEVICES_CLR_U,
+static struct tegra_clk tegra20_clks[tegra_clk_max] __initdata = {
+ [tegra_clk_spdif_out] = { .dt_id = TEGRA20_CLK_SPDIF_OUT, .present = true },
+ [tegra_clk_spdif_in] = { .dt_id = TEGRA20_CLK_SPDIF_IN, .present = true },
+ [tegra_clk_sdmmc1] = { .dt_id = TEGRA20_CLK_SDMMC1, .present = true },
+ [tegra_clk_sdmmc2] = { .dt_id = TEGRA20_CLK_SDMMC2, .present = true },
+ [tegra_clk_sdmmc3] = { .dt_id = TEGRA20_CLK_SDMMC3, .present = true },
+ [tegra_clk_sdmmc4] = { .dt_id = TEGRA20_CLK_SDMMC4, .present = true },
+ [tegra_clk_la] = { .dt_id = TEGRA20_CLK_LA, .present = true },
+ [tegra_clk_csite] = { .dt_id = TEGRA20_CLK_CSITE, .present = true },
+ [tegra_clk_vfir] = { .dt_id = TEGRA20_CLK_VFIR, .present = true },
+ [tegra_clk_mipi] = { .dt_id = TEGRA20_CLK_MIPI, .present = true },
+ [tegra_clk_nor] = { .dt_id = TEGRA20_CLK_NOR, .present = true },
+ [tegra_clk_rtc] = { .dt_id = TEGRA20_CLK_RTC, .present = true },
+ [tegra_clk_timer] = { .dt_id = TEGRA20_CLK_TIMER, .present = true },
+ [tegra_clk_kbc] = { .dt_id = TEGRA20_CLK_KBC, .present = true },
+ [tegra_clk_csus] = { .dt_id = TEGRA20_CLK_CSUS, .present = true },
+ [tegra_clk_vcp] = { .dt_id = TEGRA20_CLK_VCP, .present = true },
+ [tegra_clk_bsea] = { .dt_id = TEGRA20_CLK_BSEA, .present = true },
+ [tegra_clk_bsev] = { .dt_id = TEGRA20_CLK_BSEV, .present = true },
+ [tegra_clk_usbd] = { .dt_id = TEGRA20_CLK_USBD, .present = true },
+ [tegra_clk_usb2] = { .dt_id = TEGRA20_CLK_USB2, .present = true },
+ [tegra_clk_usb3] = { .dt_id = TEGRA20_CLK_USB3, .present = true },
+ [tegra_clk_csi] = { .dt_id = TEGRA20_CLK_CSI, .present = true },
+ [tegra_clk_isp] = { .dt_id = TEGRA20_CLK_ISP, .present = true },
+ [tegra_clk_clk_32k] = { .dt_id = TEGRA20_CLK_CLK_32K, .present = true },
+ [tegra_clk_blink] = { .dt_id = TEGRA20_CLK_BLINK, .present = true },
+ [tegra_clk_hclk] = { .dt_id = TEGRA20_CLK_HCLK, .present = true },
+ [tegra_clk_pclk] = { .dt_id = TEGRA20_CLK_PCLK, .present = true },
+ [tegra_clk_pll_p_out1] = { .dt_id = TEGRA20_CLK_PLL_P_OUT1, .present = true },
+ [tegra_clk_pll_p_out2] = { .dt_id = TEGRA20_CLK_PLL_P_OUT2, .present = true },
+ [tegra_clk_pll_p_out3] = { .dt_id = TEGRA20_CLK_PLL_P_OUT3, .present = true },
+ [tegra_clk_pll_p_out4] = { .dt_id = TEGRA20_CLK_PLL_P_OUT4, .present = true },
+ [tegra_clk_pll_p] = { .dt_id = TEGRA20_CLK_PLL_P, .present = true },
+ [tegra_clk_owr] = { .dt_id = TEGRA20_CLK_OWR, .present = true },
+ [tegra_clk_sbc1] = { .dt_id = TEGRA20_CLK_SBC1, .present = true },
+ [tegra_clk_sbc2] = { .dt_id = TEGRA20_CLK_SBC2, .present = true },
+ [tegra_clk_sbc3] = { .dt_id = TEGRA20_CLK_SBC3, .present = true },
+ [tegra_clk_sbc4] = { .dt_id = TEGRA20_CLK_SBC4, .present = true },
+ [tegra_clk_vde] = { .dt_id = TEGRA20_CLK_VDE, .present = true },
+ [tegra_clk_vi] = { .dt_id = TEGRA20_CLK_VI, .present = true },
+ [tegra_clk_epp] = { .dt_id = TEGRA20_CLK_EPP, .present = true },
+ [tegra_clk_mpe] = { .dt_id = TEGRA20_CLK_MPE, .present = true },
+ [tegra_clk_host1x] = { .dt_id = TEGRA20_CLK_HOST1X, .present = true },
+ [tegra_clk_gr2d] = { .dt_id = TEGRA20_CLK_GR2D, .present = true },
+ [tegra_clk_gr3d] = { .dt_id = TEGRA20_CLK_GR3D, .present = true },
+ [tegra_clk_ndflash] = { .dt_id = TEGRA20_CLK_NDFLASH, .present = true },
+ [tegra_clk_cve] = { .dt_id = TEGRA20_CLK_CVE, .present = true },
+ [tegra_clk_tvo] = { .dt_id = TEGRA20_CLK_TVO, .present = true },
+ [tegra_clk_tvdac] = { .dt_id = TEGRA20_CLK_TVDAC, .present = true },
+ [tegra_clk_vi_sensor] = { .dt_id = TEGRA20_CLK_VI_SENSOR, .present = true },
+ [tegra_clk_afi] = { .dt_id = TEGRA20_CLK_AFI, .present = true },
};
static unsigned long tegra20_clk_measure_input_freq(void)
@@ -577,10 +635,8 @@
/* PLLC */
clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, NULL, 0,
- 0, &pll_c_params, TEGRA_PLL_HAS_CPCON,
- pll_c_freq_table, NULL);
- clk_register_clkdev(clk, "pll_c", NULL);
- clks[pll_c] = clk;
+ &pll_c_params, NULL);
+ clks[TEGRA20_CLK_PLL_C] = clk;
/* PLLC_OUT1 */
clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
@@ -589,71 +645,13 @@
clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
clk_base + PLLC_OUT, 1, 0, CLK_SET_RATE_PARENT,
0, NULL);
- clk_register_clkdev(clk, "pll_c_out1", NULL);
- clks[pll_c_out1] = clk;
-
- /* PLLP */
- clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, NULL, 0,
- 216000000, &pll_p_params, TEGRA_PLL_FIXED |
- TEGRA_PLL_HAS_CPCON, pll_p_freq_table, NULL);
- clk_register_clkdev(clk, "pll_p", NULL);
- clks[pll_p] = clk;
-
- /* PLLP_OUT1 */
- clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p",
- clk_base + PLLP_OUTA, 0,
- TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
- 8, 8, 1, &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div",
- clk_base + PLLP_OUTA, 1, 0,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out1", NULL);
- clks[pll_p_out1] = clk;
-
- /* PLLP_OUT2 */
- clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p",
- clk_base + PLLP_OUTA, 0,
- TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
- 24, 8, 1, &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div",
- clk_base + PLLP_OUTA, 17, 16,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out2", NULL);
- clks[pll_p_out2] = clk;
-
- /* PLLP_OUT3 */
- clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p",
- clk_base + PLLP_OUTB, 0,
- TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
- 8, 8, 1, &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div",
- clk_base + PLLP_OUTB, 1, 0,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out3", NULL);
- clks[pll_p_out3] = clk;
-
- /* PLLP_OUT4 */
- clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p",
- clk_base + PLLP_OUTB, 0,
- TEGRA_DIVIDER_FIXED | TEGRA_DIVIDER_ROUND_UP,
- 24, 8, 1, &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div",
- clk_base + PLLP_OUTB, 17, 16,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out4", NULL);
- clks[pll_p_out4] = clk;
+ clks[TEGRA20_CLK_PLL_C_OUT1] = clk;
/* PLLM */
clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, NULL,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0,
- &pll_m_params, TEGRA_PLL_HAS_CPCON,
- pll_m_freq_table, NULL);
- clk_register_clkdev(clk, "pll_m", NULL);
- clks[pll_m] = clk;
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+ &pll_m_params, NULL);
+ clks[TEGRA20_CLK_PLL_M] = clk;
/* PLLM_OUT1 */
clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
@@ -662,42 +660,32 @@
clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
CLK_SET_RATE_PARENT, 0, NULL);
- clk_register_clkdev(clk, "pll_m_out1", NULL);
- clks[pll_m_out1] = clk;
+ clks[TEGRA20_CLK_PLL_M_OUT1] = clk;
/* PLLX */
clk = tegra_clk_register_pll("pll_x", "pll_ref", clk_base, NULL, 0,
- 0, &pll_x_params, TEGRA_PLL_HAS_CPCON,
- pll_x_freq_table, NULL);
- clk_register_clkdev(clk, "pll_x", NULL);
- clks[pll_x] = clk;
+ &pll_x_params, NULL);
+ clks[TEGRA20_CLK_PLL_X] = clk;
/* PLLU */
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, NULL, 0,
- 0, &pll_u_params, TEGRA_PLLU | TEGRA_PLL_HAS_CPCON,
- pll_u_freq_table, NULL);
- clk_register_clkdev(clk, "pll_u", NULL);
- clks[pll_u] = clk;
+ &pll_u_params, NULL);
+ clks[TEGRA20_CLK_PLL_U] = clk;
/* PLLD */
clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, NULL, 0,
- 0, &pll_d_params, TEGRA_PLL_HAS_CPCON,
- pll_d_freq_table, NULL);
- clk_register_clkdev(clk, "pll_d", NULL);
- clks[pll_d] = clk;
+ &pll_d_params, NULL);
+ clks[TEGRA20_CLK_PLL_D] = clk;
/* PLLD_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "pll_d_out0", NULL);
- clks[pll_d_out0] = clk;
+ clks[TEGRA20_CLK_PLL_D_OUT0] = clk;
/* PLLA */
clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, NULL, 0,
- 0, &pll_a_params, TEGRA_PLL_HAS_CPCON,
- pll_a_freq_table, NULL);
- clk_register_clkdev(clk, "pll_a", NULL);
- clks[pll_a] = clk;
+ &pll_a_params, NULL);
+ clks[TEGRA20_CLK_PLL_A] = clk;
/* PLLA_OUT0 */
clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
@@ -706,15 +694,12 @@
clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
CLK_SET_RATE_PARENT, 0, NULL);
- clk_register_clkdev(clk, "pll_a_out0", NULL);
- clks[pll_a_out0] = clk;
+ clks[TEGRA20_CLK_PLL_A_OUT0] = clk;
/* PLLE */
clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, pmc_base,
- 0, 100000000, &pll_e_params,
- 0, pll_e_freq_table, NULL);
- clk_register_clkdev(clk, "pll_e", NULL);
- clks[pll_e] = clk;
+ 0, &pll_e_params, NULL);
+ clks[TEGRA20_CLK_PLL_E] = clk;
}
static const char *cclk_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
@@ -732,40 +717,17 @@
clk = tegra_clk_register_super_mux("cclk", cclk_parents,
ARRAY_SIZE(cclk_parents), CLK_SET_RATE_PARENT,
clk_base + CCLK_BURST_POLICY, 0, 4, 0, 0, NULL);
- clk_register_clkdev(clk, "cclk", NULL);
- clks[cclk] = clk;
+ clks[TEGRA20_CLK_CCLK] = clk;
/* SCLK */
clk = tegra_clk_register_super_mux("sclk", sclk_parents,
ARRAY_SIZE(sclk_parents), CLK_SET_RATE_PARENT,
clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL);
- clk_register_clkdev(clk, "sclk", NULL);
- clks[sclk] = clk;
-
- /* HCLK */
- clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
- clk_base + CLK_SYSTEM_RATE, 4, 2, 0,
- &sysrate_lock);
- clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT,
- clk_base + CLK_SYSTEM_RATE, 7,
- CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
- clk_register_clkdev(clk, "hclk", NULL);
- clks[hclk] = clk;
-
- /* PCLK */
- clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
- clk_base + CLK_SYSTEM_RATE, 0, 2, 0,
- &sysrate_lock);
- clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT,
- clk_base + CLK_SYSTEM_RATE, 3,
- CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
- clk_register_clkdev(clk, "pclk", NULL);
- clks[pclk] = clk;
+ clks[TEGRA20_CLK_SCLK] = clk;
/* twd */
clk = clk_register_fixed_factor(NULL, "twd", "cclk", 0, 1, 4);
- clk_register_clkdev(clk, "twd", NULL);
- clks[twd] = clk;
+ clks[TEGRA20_CLK_TWD] = clk;
}
static const char *audio_parents[] = {"spdif_in", "i2s1", "i2s2", "unused",
@@ -784,18 +746,16 @@
clk = clk_register_gate(NULL, "audio", "audio_mux", 0,
clk_base + AUDIO_SYNC_CLK, 4,
CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio", NULL);
- clks[audio] = clk;
+ clks[TEGRA20_CLK_AUDIO] = clk;
/* audio_2x */
clk = clk_register_fixed_factor(NULL, "audio_doubler", "audio",
CLK_SET_RATE_PARENT, 2, 1);
clk = tegra_clk_register_periph_gate("audio_2x", "audio_doubler",
TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 89, &periph_u_regs,
+ CLK_SET_RATE_PARENT, 89,
periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio_2x", NULL);
- clks[audio_2x] = clk;
+ clks[TEGRA20_CLK_AUDIO_2X] = clk;
}
@@ -803,68 +763,36 @@
"clk_m"};
static const char *i2s2_parents[] = {"pll_a_out0", "audio_2x", "pll_p",
"clk_m"};
-static const char *spdif_out_parents[] = {"pll_a_out0", "audio_2x", "pll_p",
- "clk_m"};
-static const char *spdif_in_parents[] = {"pll_p", "pll_c", "pll_m"};
static const char *pwm_parents[] = {"pll_p", "pll_c", "audio", "clk_m",
"clk_32k"};
static const char *mux_pllpcm_clkm[] = {"pll_p", "pll_c", "pll_m", "clk_m"};
-static const char *mux_pllmcpa[] = {"pll_m", "pll_c", "pll_c", "pll_a"};
static const char *mux_pllpdc_clkm[] = {"pll_p", "pll_d_out0", "pll_c",
"clk_m"};
static const char *mux_pllmcp_clkm[] = {"pll_m", "pll_c", "pll_p", "clk_m"};
static struct tegra_periph_init_data tegra_periph_clk_list[] = {
- TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra20-i2s.0", i2s1_parents, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1),
- TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra20-i2s.1", i2s2_parents, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2),
- TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra20-spdif", spdif_out_parents, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out),
- TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra20-spdif", spdif_in_parents, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in),
- TEGRA_INIT_DATA_MUX("sbc1", NULL, "spi_tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1),
- TEGRA_INIT_DATA_MUX("sbc2", NULL, "spi_tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2),
- TEGRA_INIT_DATA_MUX("sbc3", NULL, "spi_tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3),
- TEGRA_INIT_DATA_MUX("sbc4", NULL, "spi_tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4),
- TEGRA_INIT_DATA_MUX("spi", NULL, "spi", mux_pllpcm_clkm, CLK_SOURCE_SPI, 43, &periph_h_regs, TEGRA_PERIPH_ON_APB, spi),
- TEGRA_INIT_DATA_MUX("xio", NULL, "xio", mux_pllpcm_clkm, CLK_SOURCE_XIO, 45, &periph_h_regs, 0, xio),
- TEGRA_INIT_DATA_MUX("twc", NULL, "twc", mux_pllpcm_clkm, CLK_SOURCE_TWC, 16, &periph_l_regs, TEGRA_PERIPH_ON_APB, twc),
- TEGRA_INIT_DATA_MUX("ide", NULL, "ide", mux_pllpcm_clkm, CLK_SOURCE_XIO, 25, &periph_l_regs, 0, ide),
- TEGRA_INIT_DATA_MUX("ndflash", NULL, "tegra_nand", mux_pllpcm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_l_regs, 0, ndflash),
- TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllpcm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir),
- TEGRA_INIT_DATA_MUX("csite", NULL, "csite", mux_pllpcm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, 0, csite),
- TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllpcm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, 0, la),
- TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllpcm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr),
- TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllpcm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi),
- TEGRA_INIT_DATA_MUX("vde", NULL, "vde", mux_pllpcm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde),
- TEGRA_INIT_DATA_MUX("vi", "vi", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi),
- TEGRA_INIT_DATA_MUX("epp", NULL, "epp", mux_pllmcpa, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp),
- TEGRA_INIT_DATA_MUX("mpe", NULL, "mpe", mux_pllmcpa, CLK_SOURCE_MPE, 60, &periph_h_regs, 0, mpe),
- TEGRA_INIT_DATA_MUX("host1x", NULL, "host1x", mux_pllmcpa, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x),
- TEGRA_INIT_DATA_MUX("3d", NULL, "3d", mux_pllmcpa, CLK_SOURCE_3D, 24, &periph_l_regs, TEGRA_PERIPH_MANUAL_RESET, gr3d),
- TEGRA_INIT_DATA_MUX("2d", NULL, "2d", mux_pllmcpa, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr2d),
- TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllpcm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor),
- TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1),
- TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2),
- TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3),
- TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4),
- TEGRA_INIT_DATA_MUX("cve", NULL, "cve", mux_pllpdc_clkm, CLK_SOURCE_CVE, 49, &periph_h_regs, 0, cve),
- TEGRA_INIT_DATA_MUX("tvo", NULL, "tvo", mux_pllpdc_clkm, CLK_SOURCE_TVO, 49, &periph_h_regs, 0, tvo),
- TEGRA_INIT_DATA_MUX("tvdac", NULL, "tvdac", mux_pllpdc_clkm, CLK_SOURCE_TVDAC, 53, &periph_h_regs, 0, tvdac),
- TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor),
- TEGRA_INIT_DATA_DIV16("i2c1", "div-clk", "tegra-i2c.0", mux_pllpcm_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2c1),
- TEGRA_INIT_DATA_DIV16("i2c2", "div-clk", "tegra-i2c.1", mux_pllpcm_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, TEGRA_PERIPH_ON_APB, i2c2),
- TEGRA_INIT_DATA_DIV16("i2c3", "div-clk", "tegra-i2c.2", mux_pllpcm_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2c3),
- TEGRA_INIT_DATA_DIV16("dvc", "div-clk", "tegra-i2c.3", mux_pllpcm_clkm, CLK_SOURCE_DVC, 47, &periph_h_regs, TEGRA_PERIPH_ON_APB, dvc),
- TEGRA_INIT_DATA_MUX("hdmi", NULL, "hdmi", mux_pllpdc_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi),
- TEGRA_INIT_DATA("pwm", NULL, "tegra-pwm", pwm_parents, CLK_SOURCE_PWM, 28, 3, 0, 0, 8, 1, 0, &periph_l_regs, 17, periph_clk_enb_refcnt, TEGRA_PERIPH_ON_APB, pwm),
+ TEGRA_INIT_DATA_MUX("i2s1", i2s1_parents, CLK_SOURCE_I2S1, 11, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_I2S1),
+ TEGRA_INIT_DATA_MUX("i2s2", i2s2_parents, CLK_SOURCE_I2S2, 18, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_I2S2),
+ TEGRA_INIT_DATA_MUX("spi", mux_pllpcm_clkm, CLK_SOURCE_SPI, 43, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_SPI),
+ TEGRA_INIT_DATA_MUX("xio", mux_pllpcm_clkm, CLK_SOURCE_XIO, 45, 0, TEGRA20_CLK_XIO),
+ TEGRA_INIT_DATA_MUX("twc", mux_pllpcm_clkm, CLK_SOURCE_TWC, 16, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_TWC),
+ TEGRA_INIT_DATA_MUX("ide", mux_pllpcm_clkm, CLK_SOURCE_XIO, 25, 0, TEGRA20_CLK_IDE),
+ TEGRA_INIT_DATA_DIV16("dvc", mux_pllpcm_clkm, CLK_SOURCE_DVC, 47, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_DVC),
+ TEGRA_INIT_DATA_DIV16("i2c1", mux_pllpcm_clkm, CLK_SOURCE_I2C1, 12, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_I2C1),
+ TEGRA_INIT_DATA_DIV16("i2c2", mux_pllpcm_clkm, CLK_SOURCE_I2C2, 54, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_I2C2),
+ TEGRA_INIT_DATA_DIV16("i2c3", mux_pllpcm_clkm, CLK_SOURCE_I2C3, 67, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_I2C3),
+ TEGRA_INIT_DATA_MUX("hdmi", mux_pllpdc_clkm, CLK_SOURCE_HDMI, 51, 0, TEGRA20_CLK_HDMI),
+ TEGRA_INIT_DATA("pwm", NULL, NULL, pwm_parents, CLK_SOURCE_PWM, 28, 3, 0, 0, 8, 1, 0, 17, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_PWM),
};
static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
- TEGRA_INIT_DATA_NODIV("uarta", NULL, "tegra_uart.0", mux_pllpcm_clkm, CLK_SOURCE_UARTA, 30, 2, 6, &periph_l_regs, TEGRA_PERIPH_ON_APB, uarta),
- TEGRA_INIT_DATA_NODIV("uartb", NULL, "tegra_uart.1", mux_pllpcm_clkm, CLK_SOURCE_UARTB, 30, 2, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, uartb),
- TEGRA_INIT_DATA_NODIV("uartc", NULL, "tegra_uart.2", mux_pllpcm_clkm, CLK_SOURCE_UARTC, 30, 2, 55, &periph_h_regs, TEGRA_PERIPH_ON_APB, uartc),
- TEGRA_INIT_DATA_NODIV("uartd", NULL, "tegra_uart.3", mux_pllpcm_clkm, CLK_SOURCE_UARTD, 30, 2, 65, &periph_u_regs, TEGRA_PERIPH_ON_APB, uartd),
- TEGRA_INIT_DATA_NODIV("uarte", NULL, "tegra_uart.4", mux_pllpcm_clkm, CLK_SOURCE_UARTE, 30, 2, 66, &periph_u_regs, TEGRA_PERIPH_ON_APB, uarte),
- TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllpdc_clkm, CLK_SOURCE_DISP1, 30, 2, 27, &periph_l_regs, 0, disp1),
- TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllpdc_clkm, CLK_SOURCE_DISP2, 30, 2, 26, &periph_l_regs, 0, disp2),
+ TEGRA_INIT_DATA_NODIV("uarta", mux_pllpcm_clkm, CLK_SOURCE_UARTA, 30, 2, 6, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_UARTA),
+ TEGRA_INIT_DATA_NODIV("uartb", mux_pllpcm_clkm, CLK_SOURCE_UARTB, 30, 2, 7, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_UARTB),
+ TEGRA_INIT_DATA_NODIV("uartc", mux_pllpcm_clkm, CLK_SOURCE_UARTC, 30, 2, 55, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_UARTC),
+ TEGRA_INIT_DATA_NODIV("uartd", mux_pllpcm_clkm, CLK_SOURCE_UARTD, 30, 2, 65, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_UARTD),
+ TEGRA_INIT_DATA_NODIV("uarte", mux_pllpcm_clkm, CLK_SOURCE_UARTE, 30, 2, 66, TEGRA_PERIPH_ON_APB, TEGRA20_CLK_UARTE),
+ TEGRA_INIT_DATA_NODIV("disp1", mux_pllpdc_clkm, CLK_SOURCE_DISP1, 30, 2, 27, 0, TEGRA20_CLK_DISP1),
+ TEGRA_INIT_DATA_NODIV("disp2", mux_pllpdc_clkm, CLK_SOURCE_DISP2, 30, 2, 26, 0, TEGRA20_CLK_DISP2),
};
static void __init tegra20_periph_clk_init(void)
@@ -876,69 +804,13 @@
/* ac97 */
clk = tegra_clk_register_periph_gate("ac97", "pll_a_out0",
TEGRA_PERIPH_ON_APB,
- clk_base, 0, 3, &periph_l_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra20-ac97");
- clks[ac97] = clk;
+ clk_base, 0, 3, periph_clk_enb_refcnt);
+ clks[TEGRA20_CLK_AC97] = clk;
/* apbdma */
clk = tegra_clk_register_periph_gate("apbdma", "pclk", 0, clk_base,
- 0, 34, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-apbdma");
- clks[apbdma] = clk;
-
- /* rtc */
- clk = tegra_clk_register_periph_gate("rtc", "clk_32k",
- TEGRA_PERIPH_NO_RESET,
- clk_base, 0, 4, &periph_l_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "rtc-tegra");
- clks[rtc] = clk;
-
- /* timer */
- clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base,
- 0, 5, &periph_l_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "timer");
- clks[timer] = clk;
-
- /* kbc */
- clk = tegra_clk_register_periph_gate("kbc", "clk_32k",
- TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
- clk_base, 0, 36, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-kbc");
- clks[kbc] = clk;
-
- /* csus */
- clk = tegra_clk_register_periph_gate("csus", "clk_m",
- TEGRA_PERIPH_NO_RESET,
- clk_base, 0, 92, &periph_u_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "csus", "tengra_camera");
- clks[csus] = clk;
-
- /* vcp */
- clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0,
- clk_base, 0, 29, &periph_l_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "vcp", "tegra-avp");
- clks[vcp] = clk;
-
- /* bsea */
- clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0,
- clk_base, 0, 62, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "bsea", "tegra-avp");
- clks[bsea] = clk;
-
- /* bsev */
- clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0,
- clk_base, 0, 63, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "bsev", "tegra-aes");
- clks[bsev] = clk;
+ 0, 34, periph_clk_enb_refcnt);
+ clks[TEGRA20_CLK_APBDMA] = clk;
/* emc */
clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
@@ -947,130 +819,52 @@
clk_base + CLK_SOURCE_EMC,
30, 2, 0, NULL);
clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, 0,
- 57, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "emc", NULL);
- clks[emc] = clk;
-
- /* usbd */
- clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base, 0,
- 22, &periph_l_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "fsl-tegra-udc");
- clks[usbd] = clk;
-
- /* usb2 */
- clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base, 0,
- 58, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-ehci.1");
- clks[usb2] = clk;
-
- /* usb3 */
- clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base, 0,
- 59, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-ehci.2");
- clks[usb3] = clk;
+ 57, periph_clk_enb_refcnt);
+ clks[TEGRA20_CLK_EMC] = clk;
/* dsi */
clk = tegra_clk_register_periph_gate("dsi", "pll_d", 0, clk_base, 0,
- 48, &periph_h_regs, periph_clk_enb_refcnt);
+ 48, periph_clk_enb_refcnt);
clk_register_clkdev(clk, NULL, "dsi");
- clks[dsi] = clk;
-
- /* csi */
- clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base,
- 0, 52, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "csi", "tegra_camera");
- clks[csi] = clk;
-
- /* isp */
- clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0, 23,
- &periph_l_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "isp", "tegra_camera");
- clks[isp] = clk;
+ clks[TEGRA20_CLK_DSI] = clk;
/* pex */
clk = tegra_clk_register_periph_gate("pex", "clk_m", 0, clk_base, 0, 70,
- &periph_u_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "pex", NULL);
- clks[pex] = clk;
-
- /* afi */
- clk = tegra_clk_register_periph_gate("afi", "clk_m", 0, clk_base, 0, 72,
- &periph_u_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "afi", NULL);
- clks[afi] = clk;
-
- /* pcie_xclk */
- clk = tegra_clk_register_periph_gate("pcie_xclk", "clk_m", 0, clk_base,
- 0, 74, &periph_u_regs,
periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "pcie_xclk", NULL);
- clks[pcie_xclk] = clk;
+ clks[TEGRA20_CLK_PEX] = clk;
/* cdev1 */
clk = clk_register_fixed_rate(NULL, "cdev1_fixed", NULL, CLK_IS_ROOT,
26000000);
clk = tegra_clk_register_periph_gate("cdev1", "cdev1_fixed", 0,
- clk_base, 0, 94, &periph_u_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "cdev1", NULL);
- clks[cdev1] = clk;
+ clk_base, 0, 94, periph_clk_enb_refcnt);
+ clks[TEGRA20_CLK_CDEV1] = clk;
/* cdev2 */
clk = clk_register_fixed_rate(NULL, "cdev2_fixed", NULL, CLK_IS_ROOT,
26000000);
clk = tegra_clk_register_periph_gate("cdev2", "cdev2_fixed", 0,
- clk_base, 0, 93, &periph_u_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "cdev2", NULL);
- clks[cdev2] = clk;
+ clk_base, 0, 93, periph_clk_enb_refcnt);
+ clks[TEGRA20_CLK_CDEV2] = clk;
for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
data = &tegra_periph_clk_list[i];
- clk = tegra_clk_register_periph(data->name, data->parent_names,
+ clk = tegra_clk_register_periph(data->name, data->p.parent_names,
data->num_parents, &data->periph,
clk_base, data->offset, data->flags);
- clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) {
data = &tegra_periph_nodiv_clk_list[i];
clk = tegra_clk_register_periph_nodiv(data->name,
- data->parent_names,
+ data->p.parent_names,
data->num_parents, &data->periph,
clk_base, data->offset);
- clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
-}
-
-static void __init tegra20_fixed_clk_init(void)
-{
- struct clk *clk;
-
- /* clk_32k */
- clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT,
- 32768);
- clk_register_clkdev(clk, "clk_32k", NULL);
- clks[clk_32k] = clk;
-}
-
-static void __init tegra20_pmc_clk_init(void)
-{
- struct clk *clk;
-
- /* blink */
- writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
- clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
- pmc_base + PMC_DPD_PADS_ORIDE,
- PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
- clk = clk_register_gate(NULL, "blink", "blink_override", 0,
- pmc_base + PMC_CTRL,
- PMC_CTRL_BLINK_ENB, 0, NULL);
- clk_register_clkdev(clk, "blink", NULL);
- clks[blink] = clk;
+ tegra_periph_clk_init(clk_base, pmc_base, tegra20_clks, &pll_p_params);
}
static void __init tegra20_osc_clk_init(void)
@@ -1084,15 +878,13 @@
/* clk_m */
clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT |
CLK_IGNORE_UNUSED, input_freq);
- clk_register_clkdev(clk, "clk_m", NULL);
- clks[clk_m] = clk;
+ clks[TEGRA20_CLK_CLK_M] = clk;
/* pll_ref */
pll_ref_div = tegra20_get_pll_ref_div();
clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
CLK_SET_RATE_PARENT, 1, pll_ref_div);
- clk_register_clkdev(clk, "pll_ref", NULL);
- clks[pll_ref] = clk;
+ clks[TEGRA20_CLK_PLL_REF] = clk;
}
/* Tegra20 CPU clock and reset control functions */
@@ -1226,49 +1018,49 @@
};
static struct tegra_clk_init_table init_table[] __initdata = {
- {pll_p, clk_max, 216000000, 1},
- {pll_p_out1, clk_max, 28800000, 1},
- {pll_p_out2, clk_max, 48000000, 1},
- {pll_p_out3, clk_max, 72000000, 1},
- {pll_p_out4, clk_max, 24000000, 1},
- {pll_c, clk_max, 600000000, 1},
- {pll_c_out1, clk_max, 120000000, 1},
- {sclk, pll_c_out1, 0, 1},
- {hclk, clk_max, 0, 1},
- {pclk, clk_max, 60000000, 1},
- {csite, clk_max, 0, 1},
- {emc, clk_max, 0, 1},
- {cclk, clk_max, 0, 1},
- {uarta, pll_p, 0, 0},
- {uartb, pll_p, 0, 0},
- {uartc, pll_p, 0, 0},
- {uartd, pll_p, 0, 0},
- {uarte, pll_p, 0, 0},
- {pll_a, clk_max, 56448000, 1},
- {pll_a_out0, clk_max, 11289600, 1},
- {cdev1, clk_max, 0, 1},
- {blink, clk_max, 32768, 1},
- {i2s1, pll_a_out0, 11289600, 0},
- {i2s2, pll_a_out0, 11289600, 0},
- {sdmmc1, pll_p, 48000000, 0},
- {sdmmc3, pll_p, 48000000, 0},
- {sdmmc4, pll_p, 48000000, 0},
- {spi, pll_p, 20000000, 0},
- {sbc1, pll_p, 100000000, 0},
- {sbc2, pll_p, 100000000, 0},
- {sbc3, pll_p, 100000000, 0},
- {sbc4, pll_p, 100000000, 0},
- {host1x, pll_c, 150000000, 0},
- {disp1, pll_p, 600000000, 0},
- {disp2, pll_p, 600000000, 0},
- {gr2d, pll_c, 300000000, 0},
- {gr3d, pll_c, 300000000, 0},
- {clk_max, clk_max, 0, 0}, /* This MUST be the last entry */
+ {TEGRA20_CLK_PLL_P, TEGRA20_CLK_CLK_MAX, 216000000, 1},
+ {TEGRA20_CLK_PLL_P_OUT1, TEGRA20_CLK_CLK_MAX, 28800000, 1},
+ {TEGRA20_CLK_PLL_P_OUT2, TEGRA20_CLK_CLK_MAX, 48000000, 1},
+ {TEGRA20_CLK_PLL_P_OUT3, TEGRA20_CLK_CLK_MAX, 72000000, 1},
+ {TEGRA20_CLK_PLL_P_OUT4, TEGRA20_CLK_CLK_MAX, 24000000, 1},
+ {TEGRA20_CLK_PLL_C, TEGRA20_CLK_CLK_MAX, 600000000, 1},
+ {TEGRA20_CLK_PLL_C_OUT1, TEGRA20_CLK_CLK_MAX, 120000000, 1},
+ {TEGRA20_CLK_SCLK, TEGRA20_CLK_PLL_C_OUT1, 0, 1},
+ {TEGRA20_CLK_HCLK, TEGRA20_CLK_CLK_MAX, 0, 1},
+ {TEGRA20_CLK_PCLK, TEGRA20_CLK_CLK_MAX, 60000000, 1},
+ {TEGRA20_CLK_CSITE, TEGRA20_CLK_CLK_MAX, 0, 1},
+ {TEGRA20_CLK_EMC, TEGRA20_CLK_CLK_MAX, 0, 1},
+ {TEGRA20_CLK_CCLK, TEGRA20_CLK_CLK_MAX, 0, 1},
+ {TEGRA20_CLK_UARTA, TEGRA20_CLK_PLL_P, 0, 0},
+ {TEGRA20_CLK_UARTB, TEGRA20_CLK_PLL_P, 0, 0},
+ {TEGRA20_CLK_UARTC, TEGRA20_CLK_PLL_P, 0, 0},
+ {TEGRA20_CLK_UARTD, TEGRA20_CLK_PLL_P, 0, 0},
+ {TEGRA20_CLK_UARTE, TEGRA20_CLK_PLL_P, 0, 0},
+ {TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 1},
+ {TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 1},
+ {TEGRA20_CLK_CDEV1, TEGRA20_CLK_CLK_MAX, 0, 1},
+ {TEGRA20_CLK_BLINK, TEGRA20_CLK_CLK_MAX, 32768, 1},
+ {TEGRA20_CLK_I2S1, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA20_CLK_I2S2, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA20_CLK_SDMMC1, TEGRA20_CLK_PLL_P, 48000000, 0},
+ {TEGRA20_CLK_SDMMC3, TEGRA20_CLK_PLL_P, 48000000, 0},
+ {TEGRA20_CLK_SDMMC4, TEGRA20_CLK_PLL_P, 48000000, 0},
+ {TEGRA20_CLK_SPI, TEGRA20_CLK_PLL_P, 20000000, 0},
+ {TEGRA20_CLK_SBC1, TEGRA20_CLK_PLL_P, 100000000, 0},
+ {TEGRA20_CLK_SBC2, TEGRA20_CLK_PLL_P, 100000000, 0},
+ {TEGRA20_CLK_SBC3, TEGRA20_CLK_PLL_P, 100000000, 0},
+ {TEGRA20_CLK_SBC4, TEGRA20_CLK_PLL_P, 100000000, 0},
+ {TEGRA20_CLK_HOST1X, TEGRA20_CLK_PLL_C, 150000000, 0},
+ {TEGRA20_CLK_DISP1, TEGRA20_CLK_PLL_P, 600000000, 0},
+ {TEGRA20_CLK_DISP2, TEGRA20_CLK_PLL_P, 600000000, 0},
+ {TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0},
+ {TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0},
+ {TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0}, /* This MUST be the last entry */
};
static void __init tegra20_clock_apply_init_table(void)
{
- tegra_init_from_table(init_table, clks, clk_max);
+ tegra_init_from_table(init_table, clks, TEGRA20_CLK_CLK_MAX);
}
/*
@@ -1277,11 +1069,11 @@
* table under two names.
*/
static struct tegra_clk_duplicate tegra_clk_duplicates[] = {
- TEGRA_CLK_DUPLICATE(usbd, "utmip-pad", NULL),
- TEGRA_CLK_DUPLICATE(usbd, "tegra-ehci.0", NULL),
- TEGRA_CLK_DUPLICATE(usbd, "tegra-otg", NULL),
- TEGRA_CLK_DUPLICATE(cclk, NULL, "cpu"),
- TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* Must be the last entry */
+ TEGRA_CLK_DUPLICATE(TEGRA20_CLK_USBD, "utmip-pad", NULL),
+ TEGRA_CLK_DUPLICATE(TEGRA20_CLK_USBD, "tegra-ehci.0", NULL),
+ TEGRA_CLK_DUPLICATE(TEGRA20_CLK_USBD, "tegra-otg", NULL),
+ TEGRA_CLK_DUPLICATE(TEGRA20_CLK_CCLK, NULL, "cpu"),
+ TEGRA_CLK_DUPLICATE(TEGRA20_CLK_CLK_MAX, NULL, NULL), /* Must be the last entry */
};
static const struct of_device_id pmc_match[] __initconst = {
@@ -1291,7 +1083,6 @@
static void __init tegra20_clock_init(struct device_node *np)
{
- int i;
struct device_node *node;
clk_base = of_iomap(np, 0);
@@ -1312,30 +1103,24 @@
BUG();
}
+ clks = tegra_clk_init(clk_base, TEGRA20_CLK_CLK_MAX,
+ TEGRA20_CLK_PERIPH_BANKS);
+ if (!clks)
+ return;
+
tegra20_osc_clk_init();
- tegra20_pmc_clk_init();
- tegra20_fixed_clk_init();
+ tegra_fixed_clk_init(tegra20_clks);
tegra20_pll_init();
tegra20_super_clk_init();
+ tegra_super_clk_gen4_init(clk_base, pmc_base, tegra20_clks, NULL);
tegra20_periph_clk_init();
tegra20_audio_clk_init();
+ tegra_pmc_clk_init(pmc_base, tegra20_clks);
+ tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX);
- for (i = 0; i < ARRAY_SIZE(clks); i++) {
- if (IS_ERR(clks[i])) {
- pr_err("Tegra20 clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
- BUG();
- }
- if (!clks[i])
- clks[i] = ERR_PTR(-EINVAL);
- }
-
- tegra_init_dup_clks(tegra_clk_duplicates, clks, clk_max);
-
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ tegra_add_of_provider(np);
+ tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
tegra_clk_apply_init_table = tegra20_clock_apply_init_table;
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index dbe7c80..8b10c38 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -23,42 +23,9 @@
#include <linux/of_address.h>
#include <linux/clk/tegra.h>
#include <linux/tegra-powergate.h>
-
+#include <dt-bindings/clock/tegra30-car.h>
#include "clk.h"
-
-#define RST_DEVICES_L 0x004
-#define RST_DEVICES_H 0x008
-#define RST_DEVICES_U 0x00c
-#define RST_DEVICES_V 0x358
-#define RST_DEVICES_W 0x35c
-#define RST_DEVICES_SET_L 0x300
-#define RST_DEVICES_CLR_L 0x304
-#define RST_DEVICES_SET_H 0x308
-#define RST_DEVICES_CLR_H 0x30c
-#define RST_DEVICES_SET_U 0x310
-#define RST_DEVICES_CLR_U 0x314
-#define RST_DEVICES_SET_V 0x430
-#define RST_DEVICES_CLR_V 0x434
-#define RST_DEVICES_SET_W 0x438
-#define RST_DEVICES_CLR_W 0x43c
-#define RST_DEVICES_NUM 5
-
-#define CLK_OUT_ENB_L 0x010
-#define CLK_OUT_ENB_H 0x014
-#define CLK_OUT_ENB_U 0x018
-#define CLK_OUT_ENB_V 0x360
-#define CLK_OUT_ENB_W 0x364
-#define CLK_OUT_ENB_SET_L 0x320
-#define CLK_OUT_ENB_CLR_L 0x324
-#define CLK_OUT_ENB_SET_H 0x328
-#define CLK_OUT_ENB_CLR_H 0x32c
-#define CLK_OUT_ENB_SET_U 0x330
-#define CLK_OUT_ENB_CLR_U 0x334
-#define CLK_OUT_ENB_SET_V 0x440
-#define CLK_OUT_ENB_CLR_V 0x444
-#define CLK_OUT_ENB_SET_W 0x448
-#define CLK_OUT_ENB_CLR_W 0x44c
-#define CLK_OUT_ENB_NUM 5
+#include "clk-id.h"
#define OSC_CTRL 0x50
#define OSC_CTRL_OSC_FREQ_MASK (0xF<<28)
@@ -92,6 +59,8 @@
#define SYSTEM_CLK_RATE 0x030
+#define TEGRA30_CLK_PERIPH_BANKS 5
+
#define PLLC_BASE 0x80
#define PLLC_MISC 0x8c
#define PLLM_BASE 0x90
@@ -132,88 +101,21 @@
#define AUDIO_SYNC_CLK_I2S4 0x4b0
#define AUDIO_SYNC_CLK_SPDIF 0x4b4
-#define PMC_CLK_OUT_CNTRL 0x1a8
-
-#define CLK_SOURCE_I2S0 0x1d8
-#define CLK_SOURCE_I2S1 0x100
-#define CLK_SOURCE_I2S2 0x104
-#define CLK_SOURCE_I2S3 0x3bc
-#define CLK_SOURCE_I2S4 0x3c0
#define CLK_SOURCE_SPDIF_OUT 0x108
-#define CLK_SOURCE_SPDIF_IN 0x10c
#define CLK_SOURCE_PWM 0x110
#define CLK_SOURCE_D_AUDIO 0x3d0
#define CLK_SOURCE_DAM0 0x3d8
#define CLK_SOURCE_DAM1 0x3dc
#define CLK_SOURCE_DAM2 0x3e0
-#define CLK_SOURCE_HDA 0x428
-#define CLK_SOURCE_HDA2CODEC_2X 0x3e4
-#define CLK_SOURCE_SBC1 0x134
-#define CLK_SOURCE_SBC2 0x118
-#define CLK_SOURCE_SBC3 0x11c
-#define CLK_SOURCE_SBC4 0x1b4
-#define CLK_SOURCE_SBC5 0x3c8
-#define CLK_SOURCE_SBC6 0x3cc
-#define CLK_SOURCE_SATA_OOB 0x420
-#define CLK_SOURCE_SATA 0x424
-#define CLK_SOURCE_NDFLASH 0x160
-#define CLK_SOURCE_NDSPEED 0x3f8
-#define CLK_SOURCE_VFIR 0x168
-#define CLK_SOURCE_SDMMC1 0x150
-#define CLK_SOURCE_SDMMC2 0x154
-#define CLK_SOURCE_SDMMC3 0x1bc
-#define CLK_SOURCE_SDMMC4 0x164
-#define CLK_SOURCE_VDE 0x1c8
-#define CLK_SOURCE_CSITE 0x1d4
-#define CLK_SOURCE_LA 0x1f8
-#define CLK_SOURCE_OWR 0x1cc
-#define CLK_SOURCE_NOR 0x1d0
-#define CLK_SOURCE_MIPI 0x174
-#define CLK_SOURCE_I2C1 0x124
-#define CLK_SOURCE_I2C2 0x198
-#define CLK_SOURCE_I2C3 0x1b8
-#define CLK_SOURCE_I2C4 0x3c4
-#define CLK_SOURCE_I2C5 0x128
-#define CLK_SOURCE_UARTA 0x178
-#define CLK_SOURCE_UARTB 0x17c
-#define CLK_SOURCE_UARTC 0x1a0
-#define CLK_SOURCE_UARTD 0x1c0
-#define CLK_SOURCE_UARTE 0x1c4
-#define CLK_SOURCE_VI 0x148
-#define CLK_SOURCE_VI_SENSOR 0x1a8
-#define CLK_SOURCE_3D 0x158
#define CLK_SOURCE_3D2 0x3b0
#define CLK_SOURCE_2D 0x15c
-#define CLK_SOURCE_EPP 0x16c
-#define CLK_SOURCE_MPE 0x170
-#define CLK_SOURCE_HOST1X 0x180
-#define CLK_SOURCE_CVE 0x140
-#define CLK_SOURCE_TVO 0x188
-#define CLK_SOURCE_DTV 0x1dc
#define CLK_SOURCE_HDMI 0x18c
-#define CLK_SOURCE_TVDAC 0x194
-#define CLK_SOURCE_DISP1 0x138
-#define CLK_SOURCE_DISP2 0x13c
#define CLK_SOURCE_DSIB 0xd0
-#define CLK_SOURCE_TSENSOR 0x3b8
-#define CLK_SOURCE_ACTMON 0x3e8
-#define CLK_SOURCE_EXTERN1 0x3ec
-#define CLK_SOURCE_EXTERN2 0x3f0
-#define CLK_SOURCE_EXTERN3 0x3f4
-#define CLK_SOURCE_I2CSLOW 0x3fc
#define CLK_SOURCE_SE 0x42c
-#define CLK_SOURCE_MSELECT 0x3b4
#define CLK_SOURCE_EMC 0x19c
#define AUDIO_SYNC_DOUBLER 0x49c
-#define PMC_CTRL 0
-#define PMC_CTRL_BLINK_ENB 7
-
-#define PMC_DPD_PADS_ORIDE 0x1c
-#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
-#define PMC_BLINK_TIMER 0x40
-
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
@@ -266,89 +168,41 @@
} tegra30_cpu_clk_sctx;
#endif
-static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32];
-
static void __iomem *clk_base;
static void __iomem *pmc_base;
static unsigned long input_freq;
-static DEFINE_SPINLOCK(clk_doubler_lock);
-static DEFINE_SPINLOCK(clk_out_lock);
-static DEFINE_SPINLOCK(pll_div_lock);
static DEFINE_SPINLOCK(cml_lock);
static DEFINE_SPINLOCK(pll_d_lock);
-static DEFINE_SPINLOCK(sysrate_lock);
-#define TEGRA_INIT_DATA_MUX(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- 30, 2, 0, 0, 8, 1, 0, _regs, _clk_num, \
- periph_clk_enb_refcnt, _gate_flags, _clk_id)
+#define TEGRA_INIT_DATA_MUX(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
+ 30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, \
+ _clk_num, _gate_flags, _clk_id)
-#define TEGRA_INIT_DATA_DIV16(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- 30, 2, 0, 0, 16, 0, TEGRA_DIVIDER_ROUND_UP, \
- _regs, _clk_num, periph_clk_enb_refcnt, \
+#define TEGRA_INIT_DATA_MUX8(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
+ 29, 3, 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, \
+ _clk_num, _gate_flags, _clk_id)
+
+#define TEGRA_INIT_DATA_INT(_name, _parents, _offset, \
+ _clk_num, _gate_flags, _clk_id) \
+ TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
+ 30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_INT | \
+ TEGRA_DIVIDER_ROUND_UP, _clk_num, \
_gate_flags, _clk_id)
-#define TEGRA_INIT_DATA_MUX8(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- 29, 3, 0, 0, 8, 1, 0, _regs, _clk_num, \
- periph_clk_enb_refcnt, _gate_flags, _clk_id)
-
-#define TEGRA_INIT_DATA_INT(_name, _con_id, _dev_id, _parents, _offset, \
- _clk_num, _regs, _gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- 30, 2, 0, 0, 8, 1, TEGRA_DIVIDER_INT, _regs, \
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
- _clk_id)
-
-#define TEGRA_INIT_DATA_UART(_name, _con_id, _dev_id, _parents, _offset,\
- _clk_num, _regs, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- 30, 2, 0, 0, 16, 1, TEGRA_DIVIDER_UART, _regs, \
- _clk_num, periph_clk_enb_refcnt, 0, _clk_id)
-
-#define TEGRA_INIT_DATA_NODIV(_name, _con_id, _dev_id, _parents, _offset, \
- _mux_shift, _mux_width, _clk_num, _regs, \
+#define TEGRA_INIT_DATA_NODIV(_name, _parents, _offset, \
+ _mux_shift, _mux_width, _clk_num, \
_gate_flags, _clk_id) \
- TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parents, _offset, \
- _mux_shift, _mux_width, 0, 0, 0, 0, 0, _regs, \
- _clk_num, periph_clk_enb_refcnt, _gate_flags, \
+ TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
+ _mux_shift, _mux_width, 0, 0, 0, 0, 0,\
+ _clk_num, _gate_flags, \
_clk_id)
-/*
- * IDs assigned here must be in sync with DT bindings definition
- * for Tegra30 clocks.
- */
-enum tegra30_clk {
- cpu, rtc = 4, timer, uarta, gpio = 8, sdmmc2, i2s1 = 11, i2c1, ndflash,
- sdmmc1, sdmmc4, pwm = 17, i2s2, epp, gr2d = 21, usbd, isp, gr3d,
- disp2 = 26, disp1, host1x, vcp, i2s0, cop_cache, mc, ahbdma, apbdma,
- kbc = 36, statmon, pmc, kfuse = 40, sbc1, nor, sbc2 = 44, sbc3 = 46,
- i2c5, dsia, mipi = 50, hdmi, csi, tvdac, i2c2, uartc, emc = 57, usb2,
- usb3, mpe, vde, bsea, bsev, speedo, uartd, uarte, i2c3, sbc4, sdmmc3,
- pcie, owr, afi, csite, pciex, avpucq, la, dtv = 79, ndspeed, i2cslow,
- dsib, irama = 84, iramb, iramc, iramd, cram2, audio_2x = 90, csus = 92,
- cdev2, cdev1, cpu_g = 96, cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4,
- i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x,
- atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x,
- spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda,
- se = 127, hda2hdmi, sata_cold, uartb = 160, vfir, spdif_in, spdif_out,
- vi, vi_sensor, fuse, fuse_burn, cve, tvo, clk_32k, clk_m, clk_m_div2,
- clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_m, pll_m_out1, pll_p,
- pll_p_out1, pll_p_out2, pll_p_out3, pll_p_out4, pll_a, pll_a_out0,
- pll_d, pll_d_out0, pll_d2, pll_d2_out0, pll_u, pll_x, pll_x_out0, pll_e,
- spdif_in_sync, i2s0_sync, i2s1_sync, i2s2_sync, i2s3_sync, i2s4_sync,
- vimclk_sync, audio0, audio1, audio2, audio3, audio4, spdif, clk_out_1,
- clk_out_2, clk_out_3, sclk, blink, cclk_g, cclk_lp, twd, cml0, cml1,
- hclk, pclk, clk_out_1_mux = 300, clk_max
-};
-
-static struct clk *clks[clk_max];
-static struct clk_onecell_data clk_data;
+static struct clk **clks;
/*
* Structure defining the fields for USB UTMI clocks Parameters.
@@ -564,6 +418,8 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_c_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
};
static struct div_nmp pllm_nmp = {
@@ -593,6 +449,9 @@
.div_nmp = &pllm_nmp,
.pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE,
.pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE,
+ .freq_table = pll_m_freq_table,
+ .flags = TEGRA_PLLM | TEGRA_PLL_HAS_CPCON |
+ TEGRA_PLL_SET_DCCON | TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_params pll_p_params = {
@@ -607,6 +466,9 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_p_freq_table,
+ .flags = TEGRA_PLL_FIXED | TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
+ .fixed_rate = 408000000,
};
static struct tegra_clk_pll_params pll_a_params = {
@@ -621,6 +483,8 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_a_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_params pll_d_params = {
@@ -635,6 +499,10 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .freq_table = pll_d_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK,
+
};
static struct tegra_clk_pll_params pll_d2_params = {
@@ -649,6 +517,9 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .freq_table = pll_d_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON |
+ TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_params pll_u_params = {
@@ -664,6 +535,8 @@
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
.pdiv_tohw = pllu_p,
+ .freq_table = pll_u_freq_table,
+ .flags = TEGRA_PLLU | TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON,
};
static struct tegra_clk_pll_params pll_x_params = {
@@ -678,6 +551,9 @@
.lock_mask = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_x_freq_table,
+ .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_DCCON |
+ TEGRA_PLL_USE_LOCK,
};
static struct tegra_clk_pll_params pll_e_params = {
@@ -692,116 +568,299 @@
.lock_mask = PLLE_MISC_LOCK,
.lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE,
.lock_delay = 300,
+ .freq_table = pll_e_freq_table,
+ .flags = TEGRA_PLLE_CONFIGURE | TEGRA_PLL_FIXED,
+ .fixed_rate = 100000000,
};
-/* Peripheral clock registers */
-static struct tegra_clk_periph_regs periph_l_regs = {
- .enb_reg = CLK_OUT_ENB_L,
- .enb_set_reg = CLK_OUT_ENB_SET_L,
- .enb_clr_reg = CLK_OUT_ENB_CLR_L,
- .rst_reg = RST_DEVICES_L,
- .rst_set_reg = RST_DEVICES_SET_L,
- .rst_clr_reg = RST_DEVICES_CLR_L,
+static unsigned long tegra30_input_freq[] = {
+ [0] = 13000000,
+ [1] = 16800000,
+ [4] = 19200000,
+ [5] = 38400000,
+ [8] = 12000000,
+ [9] = 48000000,
+ [12] = 260000000,
};
-static struct tegra_clk_periph_regs periph_h_regs = {
- .enb_reg = CLK_OUT_ENB_H,
- .enb_set_reg = CLK_OUT_ENB_SET_H,
- .enb_clr_reg = CLK_OUT_ENB_CLR_H,
- .rst_reg = RST_DEVICES_H,
- .rst_set_reg = RST_DEVICES_SET_H,
- .rst_clr_reg = RST_DEVICES_CLR_H,
+static struct tegra_devclk devclks[] __initdata = {
+ { .con_id = "pll_c", .dt_id = TEGRA30_CLK_PLL_C },
+ { .con_id = "pll_c_out1", .dt_id = TEGRA30_CLK_PLL_C_OUT1 },
+ { .con_id = "pll_p", .dt_id = TEGRA30_CLK_PLL_P },
+ { .con_id = "pll_p_out1", .dt_id = TEGRA30_CLK_PLL_P_OUT1 },
+ { .con_id = "pll_p_out2", .dt_id = TEGRA30_CLK_PLL_P_OUT2 },
+ { .con_id = "pll_p_out3", .dt_id = TEGRA30_CLK_PLL_P_OUT3 },
+ { .con_id = "pll_p_out4", .dt_id = TEGRA30_CLK_PLL_P_OUT4 },
+ { .con_id = "pll_m", .dt_id = TEGRA30_CLK_PLL_M },
+ { .con_id = "pll_m_out1", .dt_id = TEGRA30_CLK_PLL_M_OUT1 },
+ { .con_id = "pll_x", .dt_id = TEGRA30_CLK_PLL_X },
+ { .con_id = "pll_x_out0", .dt_id = TEGRA30_CLK_PLL_X_OUT0 },
+ { .con_id = "pll_u", .dt_id = TEGRA30_CLK_PLL_U },
+ { .con_id = "pll_d", .dt_id = TEGRA30_CLK_PLL_D },
+ { .con_id = "pll_d_out0", .dt_id = TEGRA30_CLK_PLL_D_OUT0 },
+ { .con_id = "pll_d2", .dt_id = TEGRA30_CLK_PLL_D2 },
+ { .con_id = "pll_d2_out0", .dt_id = TEGRA30_CLK_PLL_D2_OUT0 },
+ { .con_id = "pll_a", .dt_id = TEGRA30_CLK_PLL_A },
+ { .con_id = "pll_a_out0", .dt_id = TEGRA30_CLK_PLL_A_OUT0 },
+ { .con_id = "pll_e", .dt_id = TEGRA30_CLK_PLL_E },
+ { .con_id = "spdif_in_sync", .dt_id = TEGRA30_CLK_SPDIF_IN_SYNC },
+ { .con_id = "i2s0_sync", .dt_id = TEGRA30_CLK_I2S0_SYNC },
+ { .con_id = "i2s1_sync", .dt_id = TEGRA30_CLK_I2S1_SYNC },
+ { .con_id = "i2s2_sync", .dt_id = TEGRA30_CLK_I2S2_SYNC },
+ { .con_id = "i2s3_sync", .dt_id = TEGRA30_CLK_I2S3_SYNC },
+ { .con_id = "i2s4_sync", .dt_id = TEGRA30_CLK_I2S4_SYNC },
+ { .con_id = "vimclk_sync", .dt_id = TEGRA30_CLK_VIMCLK_SYNC },
+ { .con_id = "audio0", .dt_id = TEGRA30_CLK_AUDIO0 },
+ { .con_id = "audio1", .dt_id = TEGRA30_CLK_AUDIO1 },
+ { .con_id = "audio2", .dt_id = TEGRA30_CLK_AUDIO2 },
+ { .con_id = "audio3", .dt_id = TEGRA30_CLK_AUDIO3 },
+ { .con_id = "audio4", .dt_id = TEGRA30_CLK_AUDIO4 },
+ { .con_id = "spdif", .dt_id = TEGRA30_CLK_SPDIF },
+ { .con_id = "audio0_2x", .dt_id = TEGRA30_CLK_AUDIO0_2X },
+ { .con_id = "audio1_2x", .dt_id = TEGRA30_CLK_AUDIO1_2X },
+ { .con_id = "audio2_2x", .dt_id = TEGRA30_CLK_AUDIO2_2X },
+ { .con_id = "audio3_2x", .dt_id = TEGRA30_CLK_AUDIO3_2X },
+ { .con_id = "audio4_2x", .dt_id = TEGRA30_CLK_AUDIO4_2X },
+ { .con_id = "spdif_2x", .dt_id = TEGRA30_CLK_SPDIF_2X },
+ { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA30_CLK_EXTERN1 },
+ { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA30_CLK_EXTERN2 },
+ { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA30_CLK_EXTERN3 },
+ { .con_id = "blink", .dt_id = TEGRA30_CLK_BLINK },
+ { .con_id = "cclk_g", .dt_id = TEGRA30_CLK_CCLK_G },
+ { .con_id = "cclk_lp", .dt_id = TEGRA30_CLK_CCLK_LP },
+ { .con_id = "sclk", .dt_id = TEGRA30_CLK_SCLK },
+ { .con_id = "hclk", .dt_id = TEGRA30_CLK_HCLK },
+ { .con_id = "pclk", .dt_id = TEGRA30_CLK_PCLK },
+ { .con_id = "twd", .dt_id = TEGRA30_CLK_TWD },
+ { .con_id = "emc", .dt_id = TEGRA30_CLK_EMC },
+ { .con_id = "clk_32k", .dt_id = TEGRA30_CLK_CLK_32K },
+ { .con_id = "clk_m_div2", .dt_id = TEGRA30_CLK_CLK_M_DIV2 },
+ { .con_id = "clk_m_div4", .dt_id = TEGRA30_CLK_CLK_M_DIV4 },
+ { .con_id = "cml0", .dt_id = TEGRA30_CLK_CML0 },
+ { .con_id = "cml1", .dt_id = TEGRA30_CLK_CML1 },
+ { .con_id = "clk_m", .dt_id = TEGRA30_CLK_CLK_M },
+ { .con_id = "pll_ref", .dt_id = TEGRA30_CLK_PLL_REF },
+ { .con_id = "csus", .dev_id = "tengra_camera", .dt_id = TEGRA30_CLK_CSUS },
+ { .con_id = "vcp", .dev_id = "tegra-avp", .dt_id = TEGRA30_CLK_VCP },
+ { .con_id = "bsea", .dev_id = "tegra-avp", .dt_id = TEGRA30_CLK_BSEA },
+ { .con_id = "bsev", .dev_id = "tegra-aes", .dt_id = TEGRA30_CLK_BSEV },
+ { .con_id = "dsia", .dev_id = "tegradc.0", .dt_id = TEGRA30_CLK_DSIA },
+ { .con_id = "csi", .dev_id = "tegra_camera", .dt_id = TEGRA30_CLK_CSI },
+ { .con_id = "isp", .dev_id = "tegra_camera", .dt_id = TEGRA30_CLK_ISP },
+ { .con_id = "pcie", .dev_id = "tegra-pcie", .dt_id = TEGRA30_CLK_PCIE },
+ { .con_id = "afi", .dev_id = "tegra-pcie", .dt_id = TEGRA30_CLK_AFI },
+ { .con_id = "fuse", .dt_id = TEGRA30_CLK_FUSE },
+ { .con_id = "fuse_burn", .dev_id = "fuse-tegra", .dt_id = TEGRA30_CLK_FUSE_BURN },
+ { .con_id = "apbif", .dev_id = "tegra30-ahub", .dt_id = TEGRA30_CLK_APBIF },
+ { .con_id = "hda2hdmi", .dev_id = "tegra30-hda", .dt_id = TEGRA30_CLK_HDA2HDMI },
+ { .dev_id = "tegra-apbdma", .dt_id = TEGRA30_CLK_APBDMA },
+ { .dev_id = "rtc-tegra", .dt_id = TEGRA30_CLK_RTC },
+ { .dev_id = "timer", .dt_id = TEGRA30_CLK_TIMER },
+ { .dev_id = "tegra-kbc", .dt_id = TEGRA30_CLK_KBC },
+ { .dev_id = "fsl-tegra-udc", .dt_id = TEGRA30_CLK_USBD },
+ { .dev_id = "tegra-ehci.1", .dt_id = TEGRA30_CLK_USB2 },
+ { .dev_id = "tegra-ehci.2", .dt_id = TEGRA30_CLK_USB2 },
+ { .dev_id = "kfuse-tegra", .dt_id = TEGRA30_CLK_KFUSE },
+ { .dev_id = "tegra_sata_cold", .dt_id = TEGRA30_CLK_SATA_COLD },
+ { .dev_id = "dtv", .dt_id = TEGRA30_CLK_DTV },
+ { .dev_id = "tegra30-i2s.0", .dt_id = TEGRA30_CLK_I2S0 },
+ { .dev_id = "tegra30-i2s.1", .dt_id = TEGRA30_CLK_I2S1 },
+ { .dev_id = "tegra30-i2s.2", .dt_id = TEGRA30_CLK_I2S2 },
+ { .dev_id = "tegra30-i2s.3", .dt_id = TEGRA30_CLK_I2S3 },
+ { .dev_id = "tegra30-i2s.4", .dt_id = TEGRA30_CLK_I2S4 },
+ { .con_id = "spdif_out", .dev_id = "tegra30-spdif", .dt_id = TEGRA30_CLK_SPDIF_OUT },
+ { .con_id = "spdif_in", .dev_id = "tegra30-spdif", .dt_id = TEGRA30_CLK_SPDIF_IN },
+ { .con_id = "d_audio", .dev_id = "tegra30-ahub", .dt_id = TEGRA30_CLK_D_AUDIO },
+ { .dev_id = "tegra30-dam.0", .dt_id = TEGRA30_CLK_DAM0 },
+ { .dev_id = "tegra30-dam.1", .dt_id = TEGRA30_CLK_DAM1 },
+ { .dev_id = "tegra30-dam.2", .dt_id = TEGRA30_CLK_DAM2 },
+ { .con_id = "hda", .dev_id = "tegra30-hda", .dt_id = TEGRA30_CLK_HDA },
+ { .con_id = "hda2codec", .dev_id = "tegra30-hda", .dt_id = TEGRA30_CLK_HDA2CODEC_2X },
+ { .dev_id = "spi_tegra.0", .dt_id = TEGRA30_CLK_SBC1 },
+ { .dev_id = "spi_tegra.1", .dt_id = TEGRA30_CLK_SBC2 },
+ { .dev_id = "spi_tegra.2", .dt_id = TEGRA30_CLK_SBC3 },
+ { .dev_id = "spi_tegra.3", .dt_id = TEGRA30_CLK_SBC4 },
+ { .dev_id = "spi_tegra.4", .dt_id = TEGRA30_CLK_SBC5 },
+ { .dev_id = "spi_tegra.5", .dt_id = TEGRA30_CLK_SBC6 },
+ { .dev_id = "tegra_sata_oob", .dt_id = TEGRA30_CLK_SATA_OOB },
+ { .dev_id = "tegra_sata", .dt_id = TEGRA30_CLK_SATA },
+ { .dev_id = "tegra_nand", .dt_id = TEGRA30_CLK_NDFLASH },
+ { .dev_id = "tegra_nand_speed", .dt_id = TEGRA30_CLK_NDSPEED },
+ { .dev_id = "vfir", .dt_id = TEGRA30_CLK_VFIR },
+ { .dev_id = "csite", .dt_id = TEGRA30_CLK_CSITE },
+ { .dev_id = "la", .dt_id = TEGRA30_CLK_LA },
+ { .dev_id = "tegra_w1", .dt_id = TEGRA30_CLK_OWR },
+ { .dev_id = "mipi", .dt_id = TEGRA30_CLK_MIPI },
+ { .dev_id = "tegra-tsensor", .dt_id = TEGRA30_CLK_TSENSOR },
+ { .dev_id = "i2cslow", .dt_id = TEGRA30_CLK_I2CSLOW },
+ { .dev_id = "vde", .dt_id = TEGRA30_CLK_VDE },
+ { .con_id = "vi", .dev_id = "tegra_camera", .dt_id = TEGRA30_CLK_VI },
+ { .dev_id = "epp", .dt_id = TEGRA30_CLK_EPP },
+ { .dev_id = "mpe", .dt_id = TEGRA30_CLK_MPE },
+ { .dev_id = "host1x", .dt_id = TEGRA30_CLK_HOST1X },
+ { .dev_id = "3d", .dt_id = TEGRA30_CLK_GR3D },
+ { .dev_id = "3d2", .dt_id = TEGRA30_CLK_GR3D2 },
+ { .dev_id = "2d", .dt_id = TEGRA30_CLK_GR2D },
+ { .dev_id = "se", .dt_id = TEGRA30_CLK_SE },
+ { .dev_id = "mselect", .dt_id = TEGRA30_CLK_MSELECT },
+ { .dev_id = "tegra-nor", .dt_id = TEGRA30_CLK_NOR },
+ { .dev_id = "sdhci-tegra.0", .dt_id = TEGRA30_CLK_SDMMC1 },
+ { .dev_id = "sdhci-tegra.1", .dt_id = TEGRA30_CLK_SDMMC2 },
+ { .dev_id = "sdhci-tegra.2", .dt_id = TEGRA30_CLK_SDMMC3 },
+ { .dev_id = "sdhci-tegra.3", .dt_id = TEGRA30_CLK_SDMMC4 },
+ { .dev_id = "cve", .dt_id = TEGRA30_CLK_CVE },
+ { .dev_id = "tvo", .dt_id = TEGRA30_CLK_TVO },
+ { .dev_id = "tvdac", .dt_id = TEGRA30_CLK_TVDAC },
+ { .dev_id = "actmon", .dt_id = TEGRA30_CLK_ACTMON },
+ { .con_id = "vi_sensor", .dev_id = "tegra_camera", .dt_id = TEGRA30_CLK_VI_SENSOR },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.0", .dt_id = TEGRA30_CLK_I2C1 },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.1", .dt_id = TEGRA30_CLK_I2C2 },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.2", .dt_id = TEGRA30_CLK_I2C3 },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.3", .dt_id = TEGRA30_CLK_I2C4 },
+ { .con_id = "div-clk", .dev_id = "tegra-i2c.4", .dt_id = TEGRA30_CLK_I2C5 },
+ { .dev_id = "tegra_uart.0", .dt_id = TEGRA30_CLK_UARTA },
+ { .dev_id = "tegra_uart.1", .dt_id = TEGRA30_CLK_UARTB },
+ { .dev_id = "tegra_uart.2", .dt_id = TEGRA30_CLK_UARTC },
+ { .dev_id = "tegra_uart.3", .dt_id = TEGRA30_CLK_UARTD },
+ { .dev_id = "tegra_uart.4", .dt_id = TEGRA30_CLK_UARTE },
+ { .dev_id = "hdmi", .dt_id = TEGRA30_CLK_HDMI },
+ { .dev_id = "extern1", .dt_id = TEGRA30_CLK_EXTERN1 },
+ { .dev_id = "extern2", .dt_id = TEGRA30_CLK_EXTERN2 },
+ { .dev_id = "extern3", .dt_id = TEGRA30_CLK_EXTERN3 },
+ { .dev_id = "pwm", .dt_id = TEGRA30_CLK_PWM },
+ { .dev_id = "tegradc.0", .dt_id = TEGRA30_CLK_DISP1 },
+ { .dev_id = "tegradc.1", .dt_id = TEGRA30_CLK_DISP2 },
+ { .dev_id = "tegradc.1", .dt_id = TEGRA30_CLK_DSIB },
};
-static struct tegra_clk_periph_regs periph_u_regs = {
- .enb_reg = CLK_OUT_ENB_U,
- .enb_set_reg = CLK_OUT_ENB_SET_U,
- .enb_clr_reg = CLK_OUT_ENB_CLR_U,
- .rst_reg = RST_DEVICES_U,
- .rst_set_reg = RST_DEVICES_SET_U,
- .rst_clr_reg = RST_DEVICES_CLR_U,
+static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
+ [tegra_clk_clk_32k] = { .dt_id = TEGRA30_CLK_CLK_32K, .present = true },
+ [tegra_clk_clk_m] = { .dt_id = TEGRA30_CLK_CLK_M, .present = true },
+ [tegra_clk_clk_m_div2] = { .dt_id = TEGRA30_CLK_CLK_M_DIV2, .present = true },
+ [tegra_clk_clk_m_div4] = { .dt_id = TEGRA30_CLK_CLK_M_DIV4, .present = true },
+ [tegra_clk_pll_ref] = { .dt_id = TEGRA30_CLK_PLL_REF, .present = true },
+ [tegra_clk_spdif_in_sync] = { .dt_id = TEGRA30_CLK_SPDIF_IN_SYNC, .present = true },
+ [tegra_clk_i2s0_sync] = { .dt_id = TEGRA30_CLK_I2S0_SYNC, .present = true },
+ [tegra_clk_i2s1_sync] = { .dt_id = TEGRA30_CLK_I2S1_SYNC, .present = true },
+ [tegra_clk_i2s2_sync] = { .dt_id = TEGRA30_CLK_I2S2_SYNC, .present = true },
+ [tegra_clk_i2s3_sync] = { .dt_id = TEGRA30_CLK_I2S3_SYNC, .present = true },
+ [tegra_clk_i2s4_sync] = { .dt_id = TEGRA30_CLK_I2S4_SYNC, .present = true },
+ [tegra_clk_vimclk_sync] = { .dt_id = TEGRA30_CLK_VIMCLK_SYNC, .present = true },
+ [tegra_clk_audio0] = { .dt_id = TEGRA30_CLK_AUDIO0, .present = true },
+ [tegra_clk_audio1] = { .dt_id = TEGRA30_CLK_AUDIO1, .present = true },
+ [tegra_clk_audio2] = { .dt_id = TEGRA30_CLK_AUDIO2, .present = true },
+ [tegra_clk_audio3] = { .dt_id = TEGRA30_CLK_AUDIO3, .present = true },
+ [tegra_clk_audio4] = { .dt_id = TEGRA30_CLK_AUDIO4, .present = true },
+ [tegra_clk_spdif] = { .dt_id = TEGRA30_CLK_SPDIF, .present = true },
+ [tegra_clk_audio0_mux] = { .dt_id = TEGRA30_CLK_AUDIO0_MUX, .present = true },
+ [tegra_clk_audio1_mux] = { .dt_id = TEGRA30_CLK_AUDIO1_MUX, .present = true },
+ [tegra_clk_audio2_mux] = { .dt_id = TEGRA30_CLK_AUDIO2_MUX, .present = true },
+ [tegra_clk_audio3_mux] = { .dt_id = TEGRA30_CLK_AUDIO3_MUX, .present = true },
+ [tegra_clk_audio4_mux] = { .dt_id = TEGRA30_CLK_AUDIO4_MUX, .present = true },
+ [tegra_clk_spdif_mux] = { .dt_id = TEGRA30_CLK_SPDIF_MUX, .present = true },
+ [tegra_clk_audio0_2x] = { .dt_id = TEGRA30_CLK_AUDIO0_2X, .present = true },
+ [tegra_clk_audio1_2x] = { .dt_id = TEGRA30_CLK_AUDIO1_2X, .present = true },
+ [tegra_clk_audio2_2x] = { .dt_id = TEGRA30_CLK_AUDIO2_2X, .present = true },
+ [tegra_clk_audio3_2x] = { .dt_id = TEGRA30_CLK_AUDIO3_2X, .present = true },
+ [tegra_clk_audio4_2x] = { .dt_id = TEGRA30_CLK_AUDIO4_2X, .present = true },
+ [tegra_clk_spdif_2x] = { .dt_id = TEGRA30_CLK_SPDIF_2X, .present = true },
+ [tegra_clk_clk_out_1] = { .dt_id = TEGRA30_CLK_CLK_OUT_1, .present = true },
+ [tegra_clk_clk_out_2] = { .dt_id = TEGRA30_CLK_CLK_OUT_2, .present = true },
+ [tegra_clk_clk_out_3] = { .dt_id = TEGRA30_CLK_CLK_OUT_3, .present = true },
+ [tegra_clk_blink] = { .dt_id = TEGRA30_CLK_BLINK, .present = true },
+ [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_1_MUX, .present = true },
+ [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_2_MUX, .present = true },
+ [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_3_MUX, .present = true },
+ [tegra_clk_hclk] = { .dt_id = TEGRA30_CLK_HCLK, .present = true },
+ [tegra_clk_pclk] = { .dt_id = TEGRA30_CLK_PCLK, .present = true },
+ [tegra_clk_i2s0] = { .dt_id = TEGRA30_CLK_I2S0, .present = true },
+ [tegra_clk_i2s1] = { .dt_id = TEGRA30_CLK_I2S1, .present = true },
+ [tegra_clk_i2s2] = { .dt_id = TEGRA30_CLK_I2S2, .present = true },
+ [tegra_clk_i2s3] = { .dt_id = TEGRA30_CLK_I2S3, .present = true },
+ [tegra_clk_i2s4] = { .dt_id = TEGRA30_CLK_I2S4, .present = true },
+ [tegra_clk_spdif_in] = { .dt_id = TEGRA30_CLK_SPDIF_IN, .present = true },
+ [tegra_clk_hda] = { .dt_id = TEGRA30_CLK_HDA, .present = true },
+ [tegra_clk_hda2codec_2x] = { .dt_id = TEGRA30_CLK_HDA2CODEC_2X, .present = true },
+ [tegra_clk_sbc1] = { .dt_id = TEGRA30_CLK_SBC1, .present = true },
+ [tegra_clk_sbc2] = { .dt_id = TEGRA30_CLK_SBC2, .present = true },
+ [tegra_clk_sbc3] = { .dt_id = TEGRA30_CLK_SBC3, .present = true },
+ [tegra_clk_sbc4] = { .dt_id = TEGRA30_CLK_SBC4, .present = true },
+ [tegra_clk_sbc5] = { .dt_id = TEGRA30_CLK_SBC5, .present = true },
+ [tegra_clk_sbc6] = { .dt_id = TEGRA30_CLK_SBC6, .present = true },
+ [tegra_clk_ndflash] = { .dt_id = TEGRA30_CLK_NDFLASH, .present = true },
+ [tegra_clk_ndspeed] = { .dt_id = TEGRA30_CLK_NDSPEED, .present = true },
+ [tegra_clk_vfir] = { .dt_id = TEGRA30_CLK_VFIR, .present = true },
+ [tegra_clk_la] = { .dt_id = TEGRA30_CLK_LA, .present = true },
+ [tegra_clk_csite] = { .dt_id = TEGRA30_CLK_CSITE, .present = true },
+ [tegra_clk_owr] = { .dt_id = TEGRA30_CLK_OWR, .present = true },
+ [tegra_clk_mipi] = { .dt_id = TEGRA30_CLK_MIPI, .present = true },
+ [tegra_clk_tsensor] = { .dt_id = TEGRA30_CLK_TSENSOR, .present = true },
+ [tegra_clk_i2cslow] = { .dt_id = TEGRA30_CLK_I2CSLOW, .present = true },
+ [tegra_clk_vde] = { .dt_id = TEGRA30_CLK_VDE, .present = true },
+ [tegra_clk_vi] = { .dt_id = TEGRA30_CLK_VI, .present = true },
+ [tegra_clk_epp] = { .dt_id = TEGRA30_CLK_EPP, .present = true },
+ [tegra_clk_mpe] = { .dt_id = TEGRA30_CLK_MPE, .present = true },
+ [tegra_clk_host1x] = { .dt_id = TEGRA30_CLK_HOST1X, .present = true },
+ [tegra_clk_gr2d] = { .dt_id = TEGRA30_CLK_GR2D, .present = true },
+ [tegra_clk_gr3d] = { .dt_id = TEGRA30_CLK_GR3D, .present = true },
+ [tegra_clk_mselect] = { .dt_id = TEGRA30_CLK_MSELECT, .present = true },
+ [tegra_clk_nor] = { .dt_id = TEGRA30_CLK_NOR, .present = true },
+ [tegra_clk_sdmmc1] = { .dt_id = TEGRA30_CLK_SDMMC1, .present = true },
+ [tegra_clk_sdmmc2] = { .dt_id = TEGRA30_CLK_SDMMC2, .present = true },
+ [tegra_clk_sdmmc3] = { .dt_id = TEGRA30_CLK_SDMMC3, .present = true },
+ [tegra_clk_sdmmc4] = { .dt_id = TEGRA30_CLK_SDMMC4, .present = true },
+ [tegra_clk_cve] = { .dt_id = TEGRA30_CLK_CVE, .present = true },
+ [tegra_clk_tvo] = { .dt_id = TEGRA30_CLK_TVO, .present = true },
+ [tegra_clk_tvdac] = { .dt_id = TEGRA30_CLK_TVDAC, .present = true },
+ [tegra_clk_actmon] = { .dt_id = TEGRA30_CLK_ACTMON, .present = true },
+ [tegra_clk_vi_sensor] = { .dt_id = TEGRA30_CLK_VI_SENSOR, .present = true },
+ [tegra_clk_i2c1] = { .dt_id = TEGRA30_CLK_I2C1, .present = true },
+ [tegra_clk_i2c2] = { .dt_id = TEGRA30_CLK_I2C2, .present = true },
+ [tegra_clk_i2c3] = { .dt_id = TEGRA30_CLK_I2C3, .present = true },
+ [tegra_clk_i2c4] = { .dt_id = TEGRA30_CLK_I2C4, .present = true },
+ [tegra_clk_i2c5] = { .dt_id = TEGRA30_CLK_I2C5, .present = true },
+ [tegra_clk_uarta] = { .dt_id = TEGRA30_CLK_UARTA, .present = true },
+ [tegra_clk_uartb] = { .dt_id = TEGRA30_CLK_UARTB, .present = true },
+ [tegra_clk_uartc] = { .dt_id = TEGRA30_CLK_UARTC, .present = true },
+ [tegra_clk_uartd] = { .dt_id = TEGRA30_CLK_UARTD, .present = true },
+ [tegra_clk_uarte] = { .dt_id = TEGRA30_CLK_UARTE, .present = true },
+ [tegra_clk_extern1] = { .dt_id = TEGRA30_CLK_EXTERN1, .present = true },
+ [tegra_clk_extern2] = { .dt_id = TEGRA30_CLK_EXTERN2, .present = true },
+ [tegra_clk_extern3] = { .dt_id = TEGRA30_CLK_EXTERN3, .present = true },
+ [tegra_clk_disp1] = { .dt_id = TEGRA30_CLK_DISP1, .present = true },
+ [tegra_clk_disp2] = { .dt_id = TEGRA30_CLK_DISP2, .present = true },
+ [tegra_clk_apbdma] = { .dt_id = TEGRA30_CLK_APBDMA, .present = true },
+ [tegra_clk_rtc] = { .dt_id = TEGRA30_CLK_RTC, .present = true },
+ [tegra_clk_timer] = { .dt_id = TEGRA30_CLK_TIMER, .present = true },
+ [tegra_clk_kbc] = { .dt_id = TEGRA30_CLK_KBC, .present = true },
+ [tegra_clk_csus] = { .dt_id = TEGRA30_CLK_CSUS, .present = true },
+ [tegra_clk_vcp] = { .dt_id = TEGRA30_CLK_VCP, .present = true },
+ [tegra_clk_bsea] = { .dt_id = TEGRA30_CLK_BSEA, .present = true },
+ [tegra_clk_bsev] = { .dt_id = TEGRA30_CLK_BSEV, .present = true },
+ [tegra_clk_usbd] = { .dt_id = TEGRA30_CLK_USBD, .present = true },
+ [tegra_clk_usb2] = { .dt_id = TEGRA30_CLK_USB2, .present = true },
+ [tegra_clk_usb3] = { .dt_id = TEGRA30_CLK_USB3, .present = true },
+ [tegra_clk_csi] = { .dt_id = TEGRA30_CLK_CSI, .present = true },
+ [tegra_clk_isp] = { .dt_id = TEGRA30_CLK_ISP, .present = true },
+ [tegra_clk_kfuse] = { .dt_id = TEGRA30_CLK_KFUSE, .present = true },
+ [tegra_clk_fuse] = { .dt_id = TEGRA30_CLK_FUSE, .present = true },
+ [tegra_clk_fuse_burn] = { .dt_id = TEGRA30_CLK_FUSE_BURN, .present = true },
+ [tegra_clk_apbif] = { .dt_id = TEGRA30_CLK_APBIF, .present = true },
+ [tegra_clk_hda2hdmi] = { .dt_id = TEGRA30_CLK_HDA2HDMI, .present = true },
+ [tegra_clk_sata_cold] = { .dt_id = TEGRA30_CLK_SATA_COLD, .present = true },
+ [tegra_clk_sata_oob] = { .dt_id = TEGRA30_CLK_SATA_OOB, .present = true },
+ [tegra_clk_sata] = { .dt_id = TEGRA30_CLK_SATA, .present = true },
+ [tegra_clk_dtv] = { .dt_id = TEGRA30_CLK_DTV, .present = true },
+ [tegra_clk_pll_p] = { .dt_id = TEGRA30_CLK_PLL_P, .present = true },
+ [tegra_clk_pll_p_out1] = { .dt_id = TEGRA30_CLK_PLL_P_OUT1, .present = true },
+ [tegra_clk_pll_p_out2] = { .dt_id = TEGRA30_CLK_PLL_P_OUT2, .present = true },
+ [tegra_clk_pll_p_out3] = { .dt_id = TEGRA30_CLK_PLL_P_OUT3, .present = true },
+ [tegra_clk_pll_p_out4] = { .dt_id = TEGRA30_CLK_PLL_P_OUT4, .present = true },
+ [tegra_clk_pll_a] = { .dt_id = TEGRA30_CLK_PLL_A, .present = true },
+ [tegra_clk_pll_a_out0] = { .dt_id = TEGRA30_CLK_PLL_A_OUT0, .present = true },
+
};
-static struct tegra_clk_periph_regs periph_v_regs = {
- .enb_reg = CLK_OUT_ENB_V,
- .enb_set_reg = CLK_OUT_ENB_SET_V,
- .enb_clr_reg = CLK_OUT_ENB_CLR_V,
- .rst_reg = RST_DEVICES_V,
- .rst_set_reg = RST_DEVICES_SET_V,
- .rst_clr_reg = RST_DEVICES_CLR_V,
-};
-
-static struct tegra_clk_periph_regs periph_w_regs = {
- .enb_reg = CLK_OUT_ENB_W,
- .enb_set_reg = CLK_OUT_ENB_SET_W,
- .enb_clr_reg = CLK_OUT_ENB_CLR_W,
- .rst_reg = RST_DEVICES_W,
- .rst_set_reg = RST_DEVICES_SET_W,
- .rst_clr_reg = RST_DEVICES_CLR_W,
-};
-
-static void tegra30_clk_measure_input_freq(void)
-{
- u32 osc_ctrl = readl_relaxed(clk_base + OSC_CTRL);
- u32 auto_clk_control = osc_ctrl & OSC_CTRL_OSC_FREQ_MASK;
- u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
-
- switch (auto_clk_control) {
- case OSC_CTRL_OSC_FREQ_12MHZ:
- BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
- input_freq = 12000000;
- break;
- case OSC_CTRL_OSC_FREQ_13MHZ:
- BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
- input_freq = 13000000;
- break;
- case OSC_CTRL_OSC_FREQ_19_2MHZ:
- BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
- input_freq = 19200000;
- break;
- case OSC_CTRL_OSC_FREQ_26MHZ:
- BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
- input_freq = 26000000;
- break;
- case OSC_CTRL_OSC_FREQ_16_8MHZ:
- BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
- input_freq = 16800000;
- break;
- case OSC_CTRL_OSC_FREQ_38_4MHZ:
- BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2);
- input_freq = 38400000;
- break;
- case OSC_CTRL_OSC_FREQ_48MHZ:
- BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
- input_freq = 48000000;
- break;
- default:
- pr_err("Unexpected auto clock control value %d",
- auto_clk_control);
- BUG();
- return;
- }
-}
-
-static unsigned int tegra30_get_pll_ref_div(void)
-{
- u32 pll_ref_div = readl_relaxed(clk_base + OSC_CTRL) &
- OSC_CTRL_PLL_REF_DIV_MASK;
-
- switch (pll_ref_div) {
- case OSC_CTRL_PLL_REF_DIV_1:
- return 1;
- case OSC_CTRL_PLL_REF_DIV_2:
- return 2;
- case OSC_CTRL_PLL_REF_DIV_4:
- return 4;
- default:
- pr_err("Invalid pll ref divider %d", pll_ref_div);
- BUG();
- }
- return 0;
-}
-
static void tegra30_utmi_param_configure(void)
{
u32 reg;
@@ -863,11 +922,8 @@
/* PLLC */
clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0,
- 0, &pll_c_params,
- TEGRA_PLL_HAS_CPCON | TEGRA_PLL_USE_LOCK,
- pll_c_freq_table, NULL);
- clk_register_clkdev(clk, "pll_c", NULL);
- clks[pll_c] = clk;
+ &pll_c_params, NULL);
+ clks[TEGRA30_CLK_PLL_C] = clk;
/* PLLC_OUT1 */
clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
@@ -876,73 +932,13 @@
clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div",
clk_base + PLLC_OUT, 1, 0, CLK_SET_RATE_PARENT,
0, NULL);
- clk_register_clkdev(clk, "pll_c_out1", NULL);
- clks[pll_c_out1] = clk;
-
- /* PLLP */
- clk = tegra_clk_register_pll("pll_p", "pll_ref", clk_base, pmc_base, 0,
- 408000000, &pll_p_params,
- TEGRA_PLL_FIXED | TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_USE_LOCK, pll_p_freq_table, NULL);
- clk_register_clkdev(clk, "pll_p", NULL);
- clks[pll_p] = clk;
-
- /* PLLP_OUT1 */
- clk = tegra_clk_register_divider("pll_p_out1_div", "pll_p",
- clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP, 8, 8, 1,
- &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out1", "pll_p_out1_div",
- clk_base + PLLP_OUTA, 1, 0,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out1", NULL);
- clks[pll_p_out1] = clk;
-
- /* PLLP_OUT2 */
- clk = tegra_clk_register_divider("pll_p_out2_div", "pll_p",
- clk_base + PLLP_OUTA, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
- &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out2", "pll_p_out2_div",
- clk_base + PLLP_OUTA, 17, 16,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out2", NULL);
- clks[pll_p_out2] = clk;
-
- /* PLLP_OUT3 */
- clk = tegra_clk_register_divider("pll_p_out3_div", "pll_p",
- clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP, 8, 8, 1,
- &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out3", "pll_p_out3_div",
- clk_base + PLLP_OUTB, 1, 0,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out3", NULL);
- clks[pll_p_out3] = clk;
-
- /* PLLP_OUT4 */
- clk = tegra_clk_register_divider("pll_p_out4_div", "pll_p",
- clk_base + PLLP_OUTB, 0, TEGRA_DIVIDER_FIXED |
- TEGRA_DIVIDER_ROUND_UP, 24, 8, 1,
- &pll_div_lock);
- clk = tegra_clk_register_pll_out("pll_p_out4", "pll_p_out4_div",
- clk_base + PLLP_OUTB, 17, 16,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0,
- &pll_div_lock);
- clk_register_clkdev(clk, "pll_p_out4", NULL);
- clks[pll_p_out4] = clk;
+ clks[TEGRA30_CLK_PLL_C_OUT1] = clk;
/* PLLM */
clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base,
- CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE, 0,
- &pll_m_params, TEGRA_PLLM | TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_SET_DCCON | TEGRA_PLL_USE_LOCK,
- pll_m_freq_table, NULL);
- clk_register_clkdev(clk, "pll_m", NULL);
- clks[pll_m] = clk;
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+ &pll_m_params, NULL);
+ clks[TEGRA30_CLK_PLL_M] = clk;
/* PLLM_OUT1 */
clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
@@ -951,78 +947,44 @@
clk = tegra_clk_register_pll_out("pll_m_out1", "pll_m_out1_div",
clk_base + PLLM_OUT, 1, 0, CLK_IGNORE_UNUSED |
CLK_SET_RATE_PARENT, 0, NULL);
- clk_register_clkdev(clk, "pll_m_out1", NULL);
- clks[pll_m_out1] = clk;
+ clks[TEGRA30_CLK_PLL_M_OUT1] = clk;
/* PLLX */
clk = tegra_clk_register_pll("pll_x", "pll_ref", clk_base, pmc_base, 0,
- 0, &pll_x_params, TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_SET_DCCON | TEGRA_PLL_USE_LOCK,
- pll_x_freq_table, NULL);
- clk_register_clkdev(clk, "pll_x", NULL);
- clks[pll_x] = clk;
+ &pll_x_params, NULL);
+ clks[TEGRA30_CLK_PLL_X] = clk;
/* PLLX_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "pll_x_out0", NULL);
- clks[pll_x_out0] = clk;
+ clks[TEGRA30_CLK_PLL_X_OUT0] = clk;
/* PLLU */
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc_base, 0,
- 0, &pll_u_params, TEGRA_PLLU | TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_SET_LFCON,
- pll_u_freq_table,
- NULL);
- clk_register_clkdev(clk, "pll_u", NULL);
- clks[pll_u] = clk;
+ &pll_u_params, NULL);
+ clks[TEGRA30_CLK_PLL_U] = clk;
tegra30_utmi_param_configure();
/* PLLD */
clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc_base, 0,
- 0, &pll_d_params, TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_SET_LFCON | TEGRA_PLL_USE_LOCK,
- pll_d_freq_table, &pll_d_lock);
- clk_register_clkdev(clk, "pll_d", NULL);
- clks[pll_d] = clk;
+ &pll_d_params, &pll_d_lock);
+ clks[TEGRA30_CLK_PLL_D] = clk;
/* PLLD_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "pll_d_out0", NULL);
- clks[pll_d_out0] = clk;
+ clks[TEGRA30_CLK_PLL_D_OUT0] = clk;
/* PLLD2 */
clk = tegra_clk_register_pll("pll_d2", "pll_ref", clk_base, pmc_base, 0,
- 0, &pll_d2_params, TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_SET_LFCON | TEGRA_PLL_USE_LOCK,
- pll_d_freq_table, NULL);
- clk_register_clkdev(clk, "pll_d2", NULL);
- clks[pll_d2] = clk;
+ &pll_d2_params, NULL);
+ clks[TEGRA30_CLK_PLL_D2] = clk;
/* PLLD2_OUT0 */
clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "pll_d2_out0", NULL);
- clks[pll_d2_out0] = clk;
-
- /* PLLA */
- clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base, pmc_base,
- 0, 0, &pll_a_params, TEGRA_PLL_HAS_CPCON |
- TEGRA_PLL_USE_LOCK, pll_a_freq_table, NULL);
- clk_register_clkdev(clk, "pll_a", NULL);
- clks[pll_a] = clk;
-
- /* PLLA_OUT0 */
- clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
- clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
- 8, 8, 1, NULL);
- clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
- clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
- CLK_SET_RATE_PARENT, 0, NULL);
- clk_register_clkdev(clk, "pll_a_out0", NULL);
- clks[pll_a_out0] = clk;
+ clks[TEGRA30_CLK_PLL_D2_OUT0] = clk;
/* PLLE */
clk = clk_register_mux(NULL, "pll_e_mux", pll_e_parents,
@@ -1030,258 +992,8 @@
CLK_SET_RATE_NO_REPARENT,
clk_base + PLLE_AUX, 2, 1, 0, NULL);
clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base,
- CLK_GET_RATE_NOCACHE, 100000000, &pll_e_params,
- TEGRA_PLLE_CONFIGURE, pll_e_freq_table, NULL);
- clk_register_clkdev(clk, "pll_e", NULL);
- clks[pll_e] = clk;
-}
-
-static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync",
- "i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",};
-static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
- "clk_m_div4", "extern1", };
-static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
- "clk_m_div4", "extern2", };
-static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
- "clk_m_div4", "extern3", };
-
-static void __init tegra30_audio_clk_init(void)
-{
- struct clk *clk;
-
- /* spdif_in_sync */
- clk = tegra_clk_register_sync_source("spdif_in_sync", 24000000,
- 24000000);
- clk_register_clkdev(clk, "spdif_in_sync", NULL);
- clks[spdif_in_sync] = clk;
-
- /* i2s0_sync */
- clk = tegra_clk_register_sync_source("i2s0_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s0_sync", NULL);
- clks[i2s0_sync] = clk;
-
- /* i2s1_sync */
- clk = tegra_clk_register_sync_source("i2s1_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s1_sync", NULL);
- clks[i2s1_sync] = clk;
-
- /* i2s2_sync */
- clk = tegra_clk_register_sync_source("i2s2_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s2_sync", NULL);
- clks[i2s2_sync] = clk;
-
- /* i2s3_sync */
- clk = tegra_clk_register_sync_source("i2s3_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s3_sync", NULL);
- clks[i2s3_sync] = clk;
-
- /* i2s4_sync */
- clk = tegra_clk_register_sync_source("i2s4_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "i2s4_sync", NULL);
- clks[i2s4_sync] = clk;
-
- /* vimclk_sync */
- clk = tegra_clk_register_sync_source("vimclk_sync", 24000000, 24000000);
- clk_register_clkdev(clk, "vimclk_sync", NULL);
- clks[vimclk_sync] = clk;
-
- /* audio0 */
- clk = clk_register_mux(NULL, "audio0_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S0, 0, 3, 0, NULL);
- clk = clk_register_gate(NULL, "audio0", "audio0_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S0, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio0", NULL);
- clks[audio0] = clk;
-
- /* audio1 */
- clk = clk_register_mux(NULL, "audio1_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S1, 0, 3, 0, NULL);
- clk = clk_register_gate(NULL, "audio1", "audio1_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S1, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio1", NULL);
- clks[audio1] = clk;
-
- /* audio2 */
- clk = clk_register_mux(NULL, "audio2_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S2, 0, 3, 0, NULL);
- clk = clk_register_gate(NULL, "audio2", "audio2_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S2, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio2", NULL);
- clks[audio2] = clk;
-
- /* audio3 */
- clk = clk_register_mux(NULL, "audio3_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S3, 0, 3, 0, NULL);
- clk = clk_register_gate(NULL, "audio3", "audio3_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S3, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio3", NULL);
- clks[audio3] = clk;
-
- /* audio4 */
- clk = clk_register_mux(NULL, "audio4_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_I2S4, 0, 3, 0, NULL);
- clk = clk_register_gate(NULL, "audio4", "audio4_mux", 0,
- clk_base + AUDIO_SYNC_CLK_I2S4, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "audio4", NULL);
- clks[audio4] = clk;
-
- /* spdif */
- clk = clk_register_mux(NULL, "spdif_mux", mux_audio_sync_clk,
- ARRAY_SIZE(mux_audio_sync_clk),
- CLK_SET_RATE_NO_REPARENT,
- clk_base + AUDIO_SYNC_CLK_SPDIF, 0, 3, 0, NULL);
- clk = clk_register_gate(NULL, "spdif", "spdif_mux", 0,
- clk_base + AUDIO_SYNC_CLK_SPDIF, 4,
- CLK_GATE_SET_TO_DISABLE, NULL);
- clk_register_clkdev(clk, "spdif", NULL);
- clks[spdif] = clk;
-
- /* audio0_2x */
- clk = clk_register_fixed_factor(NULL, "audio0_doubler", "audio0",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio0_div", "audio0_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 24, 1, 0,
- &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio0_2x", "audio0_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 113, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio0_2x", NULL);
- clks[audio0_2x] = clk;
-
- /* audio1_2x */
- clk = clk_register_fixed_factor(NULL, "audio1_doubler", "audio1",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio1_div", "audio1_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 25, 1, 0,
- &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio1_2x", "audio1_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 114, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio1_2x", NULL);
- clks[audio1_2x] = clk;
-
- /* audio2_2x */
- clk = clk_register_fixed_factor(NULL, "audio2_doubler", "audio2",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio2_div", "audio2_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 26, 1, 0,
- &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio2_2x", "audio2_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 115, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio2_2x", NULL);
- clks[audio2_2x] = clk;
-
- /* audio3_2x */
- clk = clk_register_fixed_factor(NULL, "audio3_doubler", "audio3",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio3_div", "audio3_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 27, 1, 0,
- &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio3_2x", "audio3_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 116, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio3_2x", NULL);
- clks[audio3_2x] = clk;
-
- /* audio4_2x */
- clk = clk_register_fixed_factor(NULL, "audio4_doubler", "audio4",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("audio4_div", "audio4_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 28, 1, 0,
- &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("audio4_2x", "audio4_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 117, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "audio4_2x", NULL);
- clks[audio4_2x] = clk;
-
- /* spdif_2x */
- clk = clk_register_fixed_factor(NULL, "spdif_doubler", "spdif",
- CLK_SET_RATE_PARENT, 2, 1);
- clk = tegra_clk_register_divider("spdif_div", "spdif_doubler",
- clk_base + AUDIO_SYNC_DOUBLER, 0, 0, 29, 1, 0,
- &clk_doubler_lock);
- clk = tegra_clk_register_periph_gate("spdif_2x", "spdif_div",
- TEGRA_PERIPH_NO_RESET, clk_base,
- CLK_SET_RATE_PARENT, 118, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "spdif_2x", NULL);
- clks[spdif_2x] = clk;
-}
-
-static void __init tegra30_pmc_clk_init(void)
-{
- struct clk *clk;
-
- /* clk_out_1 */
- clk = clk_register_mux(NULL, "clk_out_1_mux", clk_out1_parents,
- ARRAY_SIZE(clk_out1_parents),
- CLK_SET_RATE_NO_REPARENT,
- pmc_base + PMC_CLK_OUT_CNTRL, 6, 3, 0,
- &clk_out_lock);
- clks[clk_out_1_mux] = clk;
- clk = clk_register_gate(NULL, "clk_out_1", "clk_out_1_mux", 0,
- pmc_base + PMC_CLK_OUT_CNTRL, 2, 0,
- &clk_out_lock);
- clk_register_clkdev(clk, "extern1", "clk_out_1");
- clks[clk_out_1] = clk;
-
- /* clk_out_2 */
- clk = clk_register_mux(NULL, "clk_out_2_mux", clk_out2_parents,
- ARRAY_SIZE(clk_out2_parents),
- CLK_SET_RATE_NO_REPARENT,
- pmc_base + PMC_CLK_OUT_CNTRL, 14, 3, 0,
- &clk_out_lock);
- clk = clk_register_gate(NULL, "clk_out_2", "clk_out_2_mux", 0,
- pmc_base + PMC_CLK_OUT_CNTRL, 10, 0,
- &clk_out_lock);
- clk_register_clkdev(clk, "extern2", "clk_out_2");
- clks[clk_out_2] = clk;
-
- /* clk_out_3 */
- clk = clk_register_mux(NULL, "clk_out_3_mux", clk_out3_parents,
- ARRAY_SIZE(clk_out3_parents),
- CLK_SET_RATE_NO_REPARENT,
- pmc_base + PMC_CLK_OUT_CNTRL, 22, 3, 0,
- &clk_out_lock);
- clk = clk_register_gate(NULL, "clk_out_3", "clk_out_3_mux", 0,
- pmc_base + PMC_CLK_OUT_CNTRL, 18, 0,
- &clk_out_lock);
- clk_register_clkdev(clk, "extern3", "clk_out_3");
- clks[clk_out_3] = clk;
-
- /* blink */
- writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
- clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
- pmc_base + PMC_DPD_PADS_ORIDE,
- PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
- clk = clk_register_gate(NULL, "blink", "blink_override", 0,
- pmc_base + PMC_CTRL,
- PMC_CTRL_BLINK_ENB, 0, NULL);
- clk_register_clkdev(clk, "blink", NULL);
- clks[blink] = clk;
-
+ CLK_GET_RATE_NOCACHE, &pll_e_params, NULL);
+ clks[TEGRA30_CLK_PLL_E] = clk;
}
static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
@@ -1332,8 +1044,7 @@
CLK_SET_RATE_PARENT,
clk_base + CCLKG_BURST_POLICY,
0, 4, 0, 0, NULL);
- clk_register_clkdev(clk, "cclk_g", NULL);
- clks[cclk_g] = clk;
+ clks[TEGRA30_CLK_CCLK_G] = clk;
/*
* Clock input to cclk_lp divided from pll_p using
@@ -1369,8 +1080,7 @@
clk_base + CCLKLP_BURST_POLICY,
TEGRA_DIVIDER_2, 4, 8, 9,
NULL);
- clk_register_clkdev(clk, "cclk_lp", NULL);
- clks[cclk_lp] = clk;
+ clks[TEGRA30_CLK_CCLK_LP] = clk;
/* SCLK */
clk = tegra_clk_register_super_mux("sclk", sclk_parents,
@@ -1378,142 +1088,44 @@
CLK_SET_RATE_PARENT,
clk_base + SCLK_BURST_POLICY,
0, 4, 0, 0, NULL);
- clk_register_clkdev(clk, "sclk", NULL);
- clks[sclk] = clk;
-
- /* HCLK */
- clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
- clk_base + SYSTEM_CLK_RATE, 4, 2, 0,
- &sysrate_lock);
- clk = clk_register_gate(NULL, "hclk", "hclk_div", CLK_SET_RATE_PARENT,
- clk_base + SYSTEM_CLK_RATE, 7,
- CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
- clk_register_clkdev(clk, "hclk", NULL);
- clks[hclk] = clk;
-
- /* PCLK */
- clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
- clk_base + SYSTEM_CLK_RATE, 0, 2, 0,
- &sysrate_lock);
- clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT,
- clk_base + SYSTEM_CLK_RATE, 3,
- CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
- clk_register_clkdev(clk, "pclk", NULL);
- clks[pclk] = clk;
+ clks[TEGRA30_CLK_SCLK] = clk;
/* twd */
clk = clk_register_fixed_factor(NULL, "twd", "cclk_g",
CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "twd", NULL);
- clks[twd] = clk;
+ clks[TEGRA30_CLK_TWD] = clk;
+
+ tegra_super_clk_gen4_init(clk_base, pmc_base, tegra30_clks, NULL);
}
static const char *mux_pllacp_clkm[] = { "pll_a_out0", "unused", "pll_p",
"clk_m" };
static const char *mux_pllpcm_clkm[] = { "pll_p", "pll_c", "pll_m", "clk_m" };
static const char *mux_pllmcp_clkm[] = { "pll_m", "pll_c", "pll_p", "clk_m" };
-static const char *i2s0_parents[] = { "pll_a_out0", "audio0_2x", "pll_p",
- "clk_m" };
-static const char *i2s1_parents[] = { "pll_a_out0", "audio1_2x", "pll_p",
- "clk_m" };
-static const char *i2s2_parents[] = { "pll_a_out0", "audio2_2x", "pll_p",
- "clk_m" };
-static const char *i2s3_parents[] = { "pll_a_out0", "audio3_2x", "pll_p",
- "clk_m" };
-static const char *i2s4_parents[] = { "pll_a_out0", "audio4_2x", "pll_p",
- "clk_m" };
static const char *spdif_out_parents[] = { "pll_a_out0", "spdif_2x", "pll_p",
"clk_m" };
-static const char *spdif_in_parents[] = { "pll_p", "pll_c", "pll_m" };
-static const char *mux_pllpc_clk32k_clkm[] = { "pll_p", "pll_c", "clk_32k",
- "clk_m" };
-static const char *mux_pllpc_clkm_clk32k[] = { "pll_p", "pll_c", "clk_m",
- "clk_32k" };
static const char *mux_pllmcpa[] = { "pll_m", "pll_c", "pll_p", "pll_a_out0" };
-static const char *mux_pllpdc_clkm[] = { "pll_p", "pll_d_out0", "pll_c",
- "clk_m" };
-static const char *mux_pllp_clkm[] = { "pll_p", "unused", "unused", "clk_m" };
static const char *mux_pllpmdacd2_clkm[] = { "pll_p", "pll_m", "pll_d_out0",
"pll_a_out0", "pll_c",
"pll_d2_out0", "clk_m" };
-static const char *mux_plla_clk32k_pllp_clkm_plle[] = { "pll_a_out0",
- "clk_32k", "pll_p",
- "clk_m", "pll_e" };
static const char *mux_plld_out0_plld2_out0[] = { "pll_d_out0",
"pll_d2_out0" };
+static const char *pwm_parents[] = { "pll_p", "pll_c", "clk_32k", "clk_m" };
static struct tegra_periph_init_data tegra_periph_clk_list[] = {
- TEGRA_INIT_DATA_MUX("i2s0", NULL, "tegra30-i2s.0", i2s0_parents, CLK_SOURCE_I2S0, 30, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s0),
- TEGRA_INIT_DATA_MUX("i2s1", NULL, "tegra30-i2s.1", i2s1_parents, CLK_SOURCE_I2S1, 11, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s1),
- TEGRA_INIT_DATA_MUX("i2s2", NULL, "tegra30-i2s.2", i2s2_parents, CLK_SOURCE_I2S2, 18, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2s2),
- TEGRA_INIT_DATA_MUX("i2s3", NULL, "tegra30-i2s.3", i2s3_parents, CLK_SOURCE_I2S3, 101, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s3),
- TEGRA_INIT_DATA_MUX("i2s4", NULL, "tegra30-i2s.4", i2s4_parents, CLK_SOURCE_I2S4, 102, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2s4),
- TEGRA_INIT_DATA_MUX("spdif_out", "spdif_out", "tegra30-spdif", spdif_out_parents, CLK_SOURCE_SPDIF_OUT, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_out),
- TEGRA_INIT_DATA_MUX("spdif_in", "spdif_in", "tegra30-spdif", spdif_in_parents, CLK_SOURCE_SPDIF_IN, 10, &periph_l_regs, TEGRA_PERIPH_ON_APB, spdif_in),
- TEGRA_INIT_DATA_MUX("d_audio", "d_audio", "tegra30-ahub", mux_pllacp_clkm, CLK_SOURCE_D_AUDIO, 106, &periph_v_regs, 0, d_audio),
- TEGRA_INIT_DATA_MUX("dam0", NULL, "tegra30-dam.0", mux_pllacp_clkm, CLK_SOURCE_DAM0, 108, &periph_v_regs, 0, dam0),
- TEGRA_INIT_DATA_MUX("dam1", NULL, "tegra30-dam.1", mux_pllacp_clkm, CLK_SOURCE_DAM1, 109, &periph_v_regs, 0, dam1),
- TEGRA_INIT_DATA_MUX("dam2", NULL, "tegra30-dam.2", mux_pllacp_clkm, CLK_SOURCE_DAM2, 110, &periph_v_regs, 0, dam2),
- TEGRA_INIT_DATA_MUX("hda", "hda", "tegra30-hda", mux_pllpcm_clkm, CLK_SOURCE_HDA, 125, &periph_v_regs, 0, hda),
- TEGRA_INIT_DATA_MUX("hda2codec_2x", "hda2codec", "tegra30-hda", mux_pllpcm_clkm, CLK_SOURCE_HDA2CODEC_2X, 111, &periph_v_regs, 0, hda2codec_2x),
- TEGRA_INIT_DATA_MUX("sbc1", NULL, "spi_tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SBC1, 41, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc1),
- TEGRA_INIT_DATA_MUX("sbc2", NULL, "spi_tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SBC2, 44, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc2),
- TEGRA_INIT_DATA_MUX("sbc3", NULL, "spi_tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SBC3, 46, &periph_h_regs, TEGRA_PERIPH_ON_APB, sbc3),
- TEGRA_INIT_DATA_MUX("sbc4", NULL, "spi_tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SBC4, 68, &periph_u_regs, TEGRA_PERIPH_ON_APB, sbc4),
- TEGRA_INIT_DATA_MUX("sbc5", NULL, "spi_tegra.4", mux_pllpcm_clkm, CLK_SOURCE_SBC5, 104, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc5),
- TEGRA_INIT_DATA_MUX("sbc6", NULL, "spi_tegra.5", mux_pllpcm_clkm, CLK_SOURCE_SBC6, 105, &periph_v_regs, TEGRA_PERIPH_ON_APB, sbc6),
- TEGRA_INIT_DATA_MUX("sata_oob", NULL, "tegra_sata_oob", mux_pllpcm_clkm, CLK_SOURCE_SATA_OOB, 123, &periph_v_regs, TEGRA_PERIPH_ON_APB, sata_oob),
- TEGRA_INIT_DATA_MUX("sata", NULL, "tegra_sata", mux_pllpcm_clkm, CLK_SOURCE_SATA, 124, &periph_v_regs, TEGRA_PERIPH_ON_APB, sata),
- TEGRA_INIT_DATA_MUX("ndflash", NULL, "tegra_nand", mux_pllpcm_clkm, CLK_SOURCE_NDFLASH, 13, &periph_l_regs, TEGRA_PERIPH_ON_APB, ndflash),
- TEGRA_INIT_DATA_MUX("ndspeed", NULL, "tegra_nand_speed", mux_pllpcm_clkm, CLK_SOURCE_NDSPEED, 80, &periph_u_regs, TEGRA_PERIPH_ON_APB, ndspeed),
- TEGRA_INIT_DATA_MUX("vfir", NULL, "vfir", mux_pllpcm_clkm, CLK_SOURCE_VFIR, 7, &periph_l_regs, TEGRA_PERIPH_ON_APB, vfir),
- TEGRA_INIT_DATA_MUX("csite", NULL, "csite", mux_pllpcm_clkm, CLK_SOURCE_CSITE, 73, &periph_u_regs, TEGRA_PERIPH_ON_APB, csite),
- TEGRA_INIT_DATA_MUX("la", NULL, "la", mux_pllpcm_clkm, CLK_SOURCE_LA, 76, &periph_u_regs, TEGRA_PERIPH_ON_APB, la),
- TEGRA_INIT_DATA_MUX("owr", NULL, "tegra_w1", mux_pllpcm_clkm, CLK_SOURCE_OWR, 71, &periph_u_regs, TEGRA_PERIPH_ON_APB, owr),
- TEGRA_INIT_DATA_MUX("mipi", NULL, "mipi", mux_pllpcm_clkm, CLK_SOURCE_MIPI, 50, &periph_h_regs, TEGRA_PERIPH_ON_APB, mipi),
- TEGRA_INIT_DATA_MUX("tsensor", NULL, "tegra-tsensor", mux_pllpc_clkm_clk32k, CLK_SOURCE_TSENSOR, 100, &periph_v_regs, TEGRA_PERIPH_ON_APB, tsensor),
- TEGRA_INIT_DATA_MUX("i2cslow", NULL, "i2cslow", mux_pllpc_clk32k_clkm, CLK_SOURCE_I2CSLOW, 81, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2cslow),
- TEGRA_INIT_DATA_INT("vde", NULL, "vde", mux_pllpcm_clkm, CLK_SOURCE_VDE, 61, &periph_h_regs, 0, vde),
- TEGRA_INIT_DATA_INT("vi", "vi", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI, 20, &periph_l_regs, 0, vi),
- TEGRA_INIT_DATA_INT("epp", NULL, "epp", mux_pllmcpa, CLK_SOURCE_EPP, 19, &periph_l_regs, 0, epp),
- TEGRA_INIT_DATA_INT("mpe", NULL, "mpe", mux_pllmcpa, CLK_SOURCE_MPE, 60, &periph_h_regs, 0, mpe),
- TEGRA_INIT_DATA_INT("host1x", NULL, "host1x", mux_pllmcpa, CLK_SOURCE_HOST1X, 28, &periph_l_regs, 0, host1x),
- TEGRA_INIT_DATA_INT("3d", NULL, "3d", mux_pllmcpa, CLK_SOURCE_3D, 24, &periph_l_regs, TEGRA_PERIPH_MANUAL_RESET, gr3d),
- TEGRA_INIT_DATA_INT("3d2", NULL, "3d2", mux_pllmcpa, CLK_SOURCE_3D2, 98, &periph_v_regs, TEGRA_PERIPH_MANUAL_RESET, gr3d2),
- TEGRA_INIT_DATA_INT("2d", NULL, "2d", mux_pllmcpa, CLK_SOURCE_2D, 21, &periph_l_regs, 0, gr2d),
- TEGRA_INIT_DATA_INT("se", NULL, "se", mux_pllpcm_clkm, CLK_SOURCE_SE, 127, &periph_v_regs, 0, se),
- TEGRA_INIT_DATA_MUX("mselect", NULL, "mselect", mux_pllp_clkm, CLK_SOURCE_MSELECT, 99, &periph_v_regs, 0, mselect),
- TEGRA_INIT_DATA_MUX("nor", NULL, "tegra-nor", mux_pllpcm_clkm, CLK_SOURCE_NOR, 42, &periph_h_regs, 0, nor),
- TEGRA_INIT_DATA_MUX("sdmmc1", NULL, "sdhci-tegra.0", mux_pllpcm_clkm, CLK_SOURCE_SDMMC1, 14, &periph_l_regs, 0, sdmmc1),
- TEGRA_INIT_DATA_MUX("sdmmc2", NULL, "sdhci-tegra.1", mux_pllpcm_clkm, CLK_SOURCE_SDMMC2, 9, &periph_l_regs, 0, sdmmc2),
- TEGRA_INIT_DATA_MUX("sdmmc3", NULL, "sdhci-tegra.2", mux_pllpcm_clkm, CLK_SOURCE_SDMMC3, 69, &periph_u_regs, 0, sdmmc3),
- TEGRA_INIT_DATA_MUX("sdmmc4", NULL, "sdhci-tegra.3", mux_pllpcm_clkm, CLK_SOURCE_SDMMC4, 15, &periph_l_regs, 0, sdmmc4),
- TEGRA_INIT_DATA_MUX("cve", NULL, "cve", mux_pllpdc_clkm, CLK_SOURCE_CVE, 49, &periph_h_regs, 0, cve),
- TEGRA_INIT_DATA_MUX("tvo", NULL, "tvo", mux_pllpdc_clkm, CLK_SOURCE_TVO, 49, &periph_h_regs, 0, tvo),
- TEGRA_INIT_DATA_MUX("tvdac", NULL, "tvdac", mux_pllpdc_clkm, CLK_SOURCE_TVDAC, 53, &periph_h_regs, 0, tvdac),
- TEGRA_INIT_DATA_MUX("actmon", NULL, "actmon", mux_pllpc_clk32k_clkm, CLK_SOURCE_ACTMON, 119, &periph_v_regs, 0, actmon),
- TEGRA_INIT_DATA_MUX("vi_sensor", "vi_sensor", "tegra_camera", mux_pllmcpa, CLK_SOURCE_VI_SENSOR, 20, &periph_l_regs, TEGRA_PERIPH_NO_RESET, vi_sensor),
- TEGRA_INIT_DATA_DIV16("i2c1", "div-clk", "tegra-i2c.0", mux_pllp_clkm, CLK_SOURCE_I2C1, 12, &periph_l_regs, TEGRA_PERIPH_ON_APB, i2c1),
- TEGRA_INIT_DATA_DIV16("i2c2", "div-clk", "tegra-i2c.1", mux_pllp_clkm, CLK_SOURCE_I2C2, 54, &periph_h_regs, TEGRA_PERIPH_ON_APB, i2c2),
- TEGRA_INIT_DATA_DIV16("i2c3", "div-clk", "tegra-i2c.2", mux_pllp_clkm, CLK_SOURCE_I2C3, 67, &periph_u_regs, TEGRA_PERIPH_ON_APB, i2c3),
- TEGRA_INIT_DATA_DIV16("i2c4", "div-clk", "tegra-i2c.3", mux_pllp_clkm, CLK_SOURCE_I2C4, 103, &periph_v_regs, TEGRA_PERIPH_ON_APB, i2c4),
- TEGRA_INIT_DATA_DIV16("i2c5", "div-clk", "tegra-i2c.4", mux_pllp_clkm, CLK_SOURCE_I2C5, 47, &periph_h_regs, TEGRA_PERIPH_ON_APB, i2c5),
- TEGRA_INIT_DATA_UART("uarta", NULL, "tegra_uart.0", mux_pllpcm_clkm, CLK_SOURCE_UARTA, 6, &periph_l_regs, uarta),
- TEGRA_INIT_DATA_UART("uartb", NULL, "tegra_uart.1", mux_pllpcm_clkm, CLK_SOURCE_UARTB, 7, &periph_l_regs, uartb),
- TEGRA_INIT_DATA_UART("uartc", NULL, "tegra_uart.2", mux_pllpcm_clkm, CLK_SOURCE_UARTC, 55, &periph_h_regs, uartc),
- TEGRA_INIT_DATA_UART("uartd", NULL, "tegra_uart.3", mux_pllpcm_clkm, CLK_SOURCE_UARTD, 65, &periph_u_regs, uartd),
- TEGRA_INIT_DATA_UART("uarte", NULL, "tegra_uart.4", mux_pllpcm_clkm, CLK_SOURCE_UARTE, 66, &periph_u_regs, uarte),
- TEGRA_INIT_DATA_MUX8("hdmi", NULL, "hdmi", mux_pllpmdacd2_clkm, CLK_SOURCE_HDMI, 51, &periph_h_regs, 0, hdmi),
- TEGRA_INIT_DATA_MUX8("extern1", NULL, "extern1", mux_plla_clk32k_pllp_clkm_plle, CLK_SOURCE_EXTERN1, 120, &periph_v_regs, 0, extern1),
- TEGRA_INIT_DATA_MUX8("extern2", NULL, "extern2", mux_plla_clk32k_pllp_clkm_plle, CLK_SOURCE_EXTERN2, 121, &periph_v_regs, 0, extern2),
- TEGRA_INIT_DATA_MUX8("extern3", NULL, "extern3", mux_plla_clk32k_pllp_clkm_plle, CLK_SOURCE_EXTERN3, 122, &periph_v_regs, 0, extern3),
- TEGRA_INIT_DATA("pwm", NULL, "pwm", mux_pllpc_clk32k_clkm, CLK_SOURCE_PWM, 28, 2, 0, 0, 8, 1, 0, &periph_l_regs, 17, periph_clk_enb_refcnt, 0, pwm),
+ TEGRA_INIT_DATA_MUX("spdif_out", spdif_out_parents, CLK_SOURCE_SPDIF_OUT, 10, TEGRA_PERIPH_ON_APB, TEGRA30_CLK_SPDIF_OUT),
+ TEGRA_INIT_DATA_MUX("d_audio", mux_pllacp_clkm, CLK_SOURCE_D_AUDIO, 106, 0, TEGRA30_CLK_D_AUDIO),
+ TEGRA_INIT_DATA_MUX("dam0", mux_pllacp_clkm, CLK_SOURCE_DAM0, 108, 0, TEGRA30_CLK_DAM0),
+ TEGRA_INIT_DATA_MUX("dam1", mux_pllacp_clkm, CLK_SOURCE_DAM1, 109, 0, TEGRA30_CLK_DAM1),
+ TEGRA_INIT_DATA_MUX("dam2", mux_pllacp_clkm, CLK_SOURCE_DAM2, 110, 0, TEGRA30_CLK_DAM2),
+ TEGRA_INIT_DATA_INT("3d2", mux_pllmcpa, CLK_SOURCE_3D2, 98, TEGRA_PERIPH_MANUAL_RESET, TEGRA30_CLK_GR3D2),
+ TEGRA_INIT_DATA_INT("se", mux_pllpcm_clkm, CLK_SOURCE_SE, 127, 0, TEGRA30_CLK_SE),
+ TEGRA_INIT_DATA_MUX8("hdmi", mux_pllpmdacd2_clkm, CLK_SOURCE_HDMI, 51, 0, TEGRA30_CLK_HDMI),
+ TEGRA_INIT_DATA("pwm", NULL, NULL, pwm_parents, CLK_SOURCE_PWM, 28, 2, 0, 0, 8, 1, 0, 17, TEGRA_PERIPH_ON_APB, TEGRA30_CLK_PWM),
};
static struct tegra_periph_init_data tegra_periph_nodiv_clk_list[] = {
- TEGRA_INIT_DATA_NODIV("disp1", NULL, "tegradc.0", mux_pllpmdacd2_clkm, CLK_SOURCE_DISP1, 29, 3, 27, &periph_l_regs, 0, disp1),
- TEGRA_INIT_DATA_NODIV("disp2", NULL, "tegradc.1", mux_pllpmdacd2_clkm, CLK_SOURCE_DISP2, 29, 3, 26, &periph_l_regs, 0, disp2),
- TEGRA_INIT_DATA_NODIV("dsib", NULL, "tegradc.1", mux_plld_out0_plld2_out0, CLK_SOURCE_DSIB, 25, 1, 82, &periph_u_regs, 0, dsib),
+ TEGRA_INIT_DATA_NODIV("dsib", mux_plld_out0_plld2_out0, CLK_SOURCE_DSIB, 25, 1, 82, 0, TEGRA30_CLK_DSIB),
};
static void __init tegra30_periph_clk_init(void)
@@ -1522,170 +1134,20 @@
struct clk *clk;
int i;
- /* apbdma */
- clk = tegra_clk_register_periph_gate("apbdma", "clk_m", 0, clk_base, 0, 34,
- &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-apbdma");
- clks[apbdma] = clk;
-
- /* rtc */
- clk = tegra_clk_register_periph_gate("rtc", "clk_32k",
- TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
- clk_base, 0, 4, &periph_l_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "rtc-tegra");
- clks[rtc] = clk;
-
- /* timer */
- clk = tegra_clk_register_periph_gate("timer", "clk_m", 0, clk_base, 0,
- 5, &periph_l_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "timer");
- clks[timer] = clk;
-
- /* kbc */
- clk = tegra_clk_register_periph_gate("kbc", "clk_32k",
- TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
- clk_base, 0, 36, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-kbc");
- clks[kbc] = clk;
-
- /* csus */
- clk = tegra_clk_register_periph_gate("csus", "clk_m",
- TEGRA_PERIPH_NO_RESET | TEGRA_PERIPH_ON_APB,
- clk_base, 0, 92, &periph_u_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "csus", "tengra_camera");
- clks[csus] = clk;
-
- /* vcp */
- clk = tegra_clk_register_periph_gate("vcp", "clk_m", 0, clk_base, 0, 29,
- &periph_l_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "vcp", "tegra-avp");
- clks[vcp] = clk;
-
- /* bsea */
- clk = tegra_clk_register_periph_gate("bsea", "clk_m", 0, clk_base, 0,
- 62, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "bsea", "tegra-avp");
- clks[bsea] = clk;
-
- /* bsev */
- clk = tegra_clk_register_periph_gate("bsev", "clk_m", 0, clk_base, 0,
- 63, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "bsev", "tegra-aes");
- clks[bsev] = clk;
-
- /* usbd */
- clk = tegra_clk_register_periph_gate("usbd", "clk_m", 0, clk_base, 0,
- 22, &periph_l_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "fsl-tegra-udc");
- clks[usbd] = clk;
-
- /* usb2 */
- clk = tegra_clk_register_periph_gate("usb2", "clk_m", 0, clk_base, 0,
- 58, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-ehci.1");
- clks[usb2] = clk;
-
- /* usb3 */
- clk = tegra_clk_register_periph_gate("usb3", "clk_m", 0, clk_base, 0,
- 59, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra-ehci.2");
- clks[usb3] = clk;
-
/* dsia */
clk = tegra_clk_register_periph_gate("dsia", "pll_d_out0", 0, clk_base,
- 0, 48, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "dsia", "tegradc.0");
- clks[dsia] = clk;
-
- /* csi */
- clk = tegra_clk_register_periph_gate("csi", "pll_p_out3", 0, clk_base,
- 0, 52, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "csi", "tegra_camera");
- clks[csi] = clk;
-
- /* isp */
- clk = tegra_clk_register_periph_gate("isp", "clk_m", 0, clk_base, 0, 23,
- &periph_l_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "isp", "tegra_camera");
- clks[isp] = clk;
+ 0, 48, periph_clk_enb_refcnt);
+ clks[TEGRA30_CLK_DSIA] = clk;
/* pcie */
clk = tegra_clk_register_periph_gate("pcie", "clk_m", 0, clk_base, 0,
- 70, &periph_u_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "pcie", "tegra-pcie");
- clks[pcie] = clk;
+ 70, periph_clk_enb_refcnt);
+ clks[TEGRA30_CLK_PCIE] = clk;
/* afi */
clk = tegra_clk_register_periph_gate("afi", "clk_m", 0, clk_base, 0, 72,
- &periph_u_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "afi", "tegra-pcie");
- clks[afi] = clk;
-
- /* pciex */
- clk = tegra_clk_register_periph_gate("pciex", "pll_e", 0, clk_base, 0,
- 74, &periph_u_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "pciex", "tegra-pcie");
- clks[pciex] = clk;
-
- /* kfuse */
- clk = tegra_clk_register_periph_gate("kfuse", "clk_m",
- TEGRA_PERIPH_ON_APB,
- clk_base, 0, 40, &periph_h_regs,
periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "kfuse-tegra");
- clks[kfuse] = clk;
-
- /* fuse */
- clk = tegra_clk_register_periph_gate("fuse", "clk_m",
- TEGRA_PERIPH_ON_APB,
- clk_base, 0, 39, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "fuse", "fuse-tegra");
- clks[fuse] = clk;
-
- /* fuse_burn */
- clk = tegra_clk_register_periph_gate("fuse_burn", "clk_m",
- TEGRA_PERIPH_ON_APB,
- clk_base, 0, 39, &periph_h_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "fuse_burn", "fuse-tegra");
- clks[fuse_burn] = clk;
-
- /* apbif */
- clk = tegra_clk_register_periph_gate("apbif", "clk_m", 0,
- clk_base, 0, 107, &periph_v_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "apbif", "tegra30-ahub");
- clks[apbif] = clk;
-
- /* hda2hdmi */
- clk = tegra_clk_register_periph_gate("hda2hdmi", "clk_m",
- TEGRA_PERIPH_ON_APB,
- clk_base, 0, 128, &periph_w_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "hda2hdmi", "tegra30-hda");
- clks[hda2hdmi] = clk;
-
- /* sata_cold */
- clk = tegra_clk_register_periph_gate("sata_cold", "clk_m",
- TEGRA_PERIPH_ON_APB,
- clk_base, 0, 129, &periph_w_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "tegra_sata_cold");
- clks[sata_cold] = clk;
-
- /* dtv */
- clk = tegra_clk_register_periph_gate("dtv", "clk_m",
- TEGRA_PERIPH_ON_APB,
- clk_base, 0, 79, &periph_u_regs,
- periph_clk_enb_refcnt);
- clk_register_clkdev(clk, NULL, "dtv");
- clks[dtv] = clk;
+ clks[TEGRA30_CLK_AFI] = clk;
/* emc */
clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
@@ -1694,84 +1156,37 @@
clk_base + CLK_SOURCE_EMC,
30, 2, 0, NULL);
clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, 0,
- 57, &periph_h_regs, periph_clk_enb_refcnt);
- clk_register_clkdev(clk, "emc", NULL);
- clks[emc] = clk;
+ 57, periph_clk_enb_refcnt);
+ clks[TEGRA30_CLK_EMC] = clk;
+
+ /* cml0 */
+ clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
+ 0, 0, &cml_lock);
+ clks[TEGRA30_CLK_CML0] = clk;
+
+ /* cml1 */
+ clk = clk_register_gate(NULL, "cml1", "pll_e", 0, clk_base + PLLE_AUX,
+ 1, 0, &cml_lock);
+ clks[TEGRA30_CLK_CML1] = clk;
for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
data = &tegra_periph_clk_list[i];
- clk = tegra_clk_register_periph(data->name, data->parent_names,
+ clk = tegra_clk_register_periph(data->name, data->p.parent_names,
data->num_parents, &data->periph,
clk_base, data->offset, data->flags);
- clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
for (i = 0; i < ARRAY_SIZE(tegra_periph_nodiv_clk_list); i++) {
data = &tegra_periph_nodiv_clk_list[i];
clk = tegra_clk_register_periph_nodiv(data->name,
- data->parent_names,
+ data->p.parent_names,
data->num_parents, &data->periph,
clk_base, data->offset);
- clk_register_clkdev(clk, data->con_id, data->dev_id);
clks[data->clk_id] = clk;
}
-}
-static void __init tegra30_fixed_clk_init(void)
-{
- struct clk *clk;
-
- /* clk_32k */
- clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, CLK_IS_ROOT,
- 32768);
- clk_register_clkdev(clk, "clk_32k", NULL);
- clks[clk_32k] = clk;
-
- /* clk_m_div2 */
- clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
- CLK_SET_RATE_PARENT, 1, 2);
- clk_register_clkdev(clk, "clk_m_div2", NULL);
- clks[clk_m_div2] = clk;
-
- /* clk_m_div4 */
- clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
- CLK_SET_RATE_PARENT, 1, 4);
- clk_register_clkdev(clk, "clk_m_div4", NULL);
- clks[clk_m_div4] = clk;
-
- /* cml0 */
- clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
- 0, 0, &cml_lock);
- clk_register_clkdev(clk, "cml0", NULL);
- clks[cml0] = clk;
-
- /* cml1 */
- clk = clk_register_gate(NULL, "cml1", "pll_e", 0, clk_base + PLLE_AUX,
- 1, 0, &cml_lock);
- clk_register_clkdev(clk, "cml1", NULL);
- clks[cml1] = clk;
-}
-
-static void __init tegra30_osc_clk_init(void)
-{
- struct clk *clk;
- unsigned int pll_ref_div;
-
- tegra30_clk_measure_input_freq();
-
- /* clk_m */
- clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT,
- input_freq);
- clk_register_clkdev(clk, "clk_m", NULL);
- clks[clk_m] = clk;
-
- /* pll_ref */
- pll_ref_div = tegra30_get_pll_ref_div();
- clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
- CLK_SET_RATE_PARENT, 1, pll_ref_div);
- clk_register_clkdev(clk, "pll_ref", NULL);
- clks[pll_ref] = clk;
+ tegra_periph_clk_init(clk_base, pmc_base, tegra30_clks, &pll_p_params);
}
/* Tegra30 CPU clock and reset control functions */
@@ -1913,48 +1328,49 @@
};
static struct tegra_clk_init_table init_table[] __initdata = {
- {uarta, pll_p, 408000000, 0},
- {uartb, pll_p, 408000000, 0},
- {uartc, pll_p, 408000000, 0},
- {uartd, pll_p, 408000000, 0},
- {uarte, pll_p, 408000000, 0},
- {pll_a, clk_max, 564480000, 1},
- {pll_a_out0, clk_max, 11289600, 1},
- {extern1, pll_a_out0, 0, 1},
- {clk_out_1_mux, extern1, 0, 0},
- {clk_out_1, clk_max, 0, 1},
- {blink, clk_max, 0, 1},
- {i2s0, pll_a_out0, 11289600, 0},
- {i2s1, pll_a_out0, 11289600, 0},
- {i2s2, pll_a_out0, 11289600, 0},
- {i2s3, pll_a_out0, 11289600, 0},
- {i2s4, pll_a_out0, 11289600, 0},
- {sdmmc1, pll_p, 48000000, 0},
- {sdmmc2, pll_p, 48000000, 0},
- {sdmmc3, pll_p, 48000000, 0},
- {pll_m, clk_max, 0, 1},
- {pclk, clk_max, 0, 1},
- {csite, clk_max, 0, 1},
- {emc, clk_max, 0, 1},
- {mselect, clk_max, 0, 1},
- {sbc1, pll_p, 100000000, 0},
- {sbc2, pll_p, 100000000, 0},
- {sbc3, pll_p, 100000000, 0},
- {sbc4, pll_p, 100000000, 0},
- {sbc5, pll_p, 100000000, 0},
- {sbc6, pll_p, 100000000, 0},
- {host1x, pll_c, 150000000, 0},
- {disp1, pll_p, 600000000, 0},
- {disp2, pll_p, 600000000, 0},
- {twd, clk_max, 0, 1},
- {gr2d, pll_c, 300000000, 0},
- {gr3d, pll_c, 300000000, 0},
- {clk_max, clk_max, 0, 0}, /* This MUST be the last entry. */
+ {TEGRA30_CLK_UARTA, TEGRA30_CLK_PLL_P, 408000000, 0},
+ {TEGRA30_CLK_UARTB, TEGRA30_CLK_PLL_P, 408000000, 0},
+ {TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0},
+ {TEGRA30_CLK_UARTD, TEGRA30_CLK_PLL_P, 408000000, 0},
+ {TEGRA30_CLK_UARTE, TEGRA30_CLK_PLL_P, 408000000, 0},
+ {TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 1},
+ {TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 1},
+ {TEGRA30_CLK_EXTERN1, TEGRA30_CLK_PLL_A_OUT0, 0, 1},
+ {TEGRA30_CLK_CLK_OUT_1_MUX, TEGRA30_CLK_EXTERN1, 0, 0},
+ {TEGRA30_CLK_CLK_OUT_1, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_BLINK, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_I2S0, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA30_CLK_I2S1, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA30_CLK_I2S2, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA30_CLK_I2S3, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA30_CLK_I2S4, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0},
+ {TEGRA30_CLK_SDMMC1, TEGRA30_CLK_PLL_P, 48000000, 0},
+ {TEGRA30_CLK_SDMMC2, TEGRA30_CLK_PLL_P, 48000000, 0},
+ {TEGRA30_CLK_SDMMC3, TEGRA30_CLK_PLL_P, 48000000, 0},
+ {TEGRA30_CLK_PLL_M, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_PCLK, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_CSITE, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_EMC, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_MSELECT, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_SBC1, TEGRA30_CLK_PLL_P, 100000000, 0},
+ {TEGRA30_CLK_SBC2, TEGRA30_CLK_PLL_P, 100000000, 0},
+ {TEGRA30_CLK_SBC3, TEGRA30_CLK_PLL_P, 100000000, 0},
+ {TEGRA30_CLK_SBC4, TEGRA30_CLK_PLL_P, 100000000, 0},
+ {TEGRA30_CLK_SBC5, TEGRA30_CLK_PLL_P, 100000000, 0},
+ {TEGRA30_CLK_SBC6, TEGRA30_CLK_PLL_P, 100000000, 0},
+ {TEGRA30_CLK_HOST1X, TEGRA30_CLK_PLL_C, 150000000, 0},
+ {TEGRA30_CLK_DISP1, TEGRA30_CLK_PLL_P, 600000000, 0},
+ {TEGRA30_CLK_DISP2, TEGRA30_CLK_PLL_P, 600000000, 0},
+ {TEGRA30_CLK_TWD, TEGRA30_CLK_CLK_MAX, 0, 1},
+ {TEGRA30_CLK_GR2D, TEGRA30_CLK_PLL_C, 300000000, 0},
+ {TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0},
+ {TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0},
+ {TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0}, /* This MUST be the last entry. */
};
static void __init tegra30_clock_apply_init_table(void)
{
- tegra_init_from_table(init_table, clks, clk_max);
+ tegra_init_from_table(init_table, clks, TEGRA30_CLK_CLK_MAX);
}
/*
@@ -1963,19 +1379,18 @@
* table under two names.
*/
static struct tegra_clk_duplicate tegra_clk_duplicates[] = {
- TEGRA_CLK_DUPLICATE(usbd, "utmip-pad", NULL),
- TEGRA_CLK_DUPLICATE(usbd, "tegra-ehci.0", NULL),
- TEGRA_CLK_DUPLICATE(usbd, "tegra-otg", NULL),
- TEGRA_CLK_DUPLICATE(bsev, "tegra-avp", "bsev"),
- TEGRA_CLK_DUPLICATE(bsev, "nvavp", "bsev"),
- TEGRA_CLK_DUPLICATE(vde, "tegra-aes", "vde"),
- TEGRA_CLK_DUPLICATE(bsea, "tegra-aes", "bsea"),
- TEGRA_CLK_DUPLICATE(bsea, "nvavp", "bsea"),
- TEGRA_CLK_DUPLICATE(cml1, "tegra_sata_cml", NULL),
- TEGRA_CLK_DUPLICATE(cml0, "tegra_pcie", "cml"),
- TEGRA_CLK_DUPLICATE(pciex, "tegra_pcie", "pciex"),
- TEGRA_CLK_DUPLICATE(vcp, "nvavp", "vcp"),
- TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* MUST be the last entry */
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_USBD, "utmip-pad", NULL),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_USBD, "tegra-ehci.0", NULL),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_USBD, "tegra-otg", NULL),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_BSEV, "tegra-avp", "bsev"),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_BSEV, "nvavp", "bsev"),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_VDE, "tegra-aes", "vde"),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_BSEA, "tegra-aes", "bsea"),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_BSEA, "nvavp", "bsea"),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_CML1, "tegra_sata_cml", NULL),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_CML0, "tegra_pcie", "cml"),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_VCP, "nvavp", "vcp"),
+ TEGRA_CLK_DUPLICATE(TEGRA30_CLK_CLK_MAX, NULL, NULL), /* MUST be the last entry */
};
static const struct of_device_id pmc_match[] __initconst = {
@@ -1986,7 +1401,6 @@
static void __init tegra30_clock_init(struct device_node *np)
{
struct device_node *node;
- int i;
clk_base = of_iomap(np, 0);
if (!clk_base) {
@@ -2006,29 +1420,27 @@
BUG();
}
- tegra30_osc_clk_init();
- tegra30_fixed_clk_init();
+ clks = tegra_clk_init(clk_base, TEGRA30_CLK_CLK_MAX,
+ TEGRA30_CLK_PERIPH_BANKS);
+ if (!clks)
+ return;
+
+ if (tegra_osc_clk_init(clk_base, tegra30_clks, tegra30_input_freq,
+ ARRAY_SIZE(tegra30_input_freq), &input_freq, NULL) < 0)
+ return;
+
+
+ tegra_fixed_clk_init(tegra30_clks);
tegra30_pll_init();
tegra30_super_clk_init();
tegra30_periph_clk_init();
- tegra30_audio_clk_init();
- tegra30_pmc_clk_init();
+ tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks, &pll_a_params);
+ tegra_pmc_clk_init(pmc_base, tegra30_clks);
- for (i = 0; i < ARRAY_SIZE(clks); i++) {
- if (IS_ERR(clks[i])) {
- pr_err("Tegra30 clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
- BUG();
- }
- if (!clks[i])
- clks[i] = ERR_PTR(-EINVAL);
- }
+ tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);
- tegra_init_dup_clks(tegra_clk_duplicates, clks, clk_max);
-
- clk_data.clks = clks;
- clk_data.clk_num = ARRAY_SIZE(clks);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+ tegra_add_of_provider(np);
+ tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
tegra_clk_apply_init_table = tegra30_clock_apply_init_table;
diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
index 86581ac..c0a7d77 100644
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
@@ -18,13 +18,175 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/clk/tegra.h>
+#include <linux/reset-controller.h>
+#include <linux/tegra-soc.h>
#include "clk.h"
+#define CLK_OUT_ENB_L 0x010
+#define CLK_OUT_ENB_H 0x014
+#define CLK_OUT_ENB_U 0x018
+#define CLK_OUT_ENB_V 0x360
+#define CLK_OUT_ENB_W 0x364
+#define CLK_OUT_ENB_X 0x280
+#define CLK_OUT_ENB_SET_L 0x320
+#define CLK_OUT_ENB_CLR_L 0x324
+#define CLK_OUT_ENB_SET_H 0x328
+#define CLK_OUT_ENB_CLR_H 0x32c
+#define CLK_OUT_ENB_SET_U 0x330
+#define CLK_OUT_ENB_CLR_U 0x334
+#define CLK_OUT_ENB_SET_V 0x440
+#define CLK_OUT_ENB_CLR_V 0x444
+#define CLK_OUT_ENB_SET_W 0x448
+#define CLK_OUT_ENB_CLR_W 0x44c
+#define CLK_OUT_ENB_SET_X 0x284
+#define CLK_OUT_ENB_CLR_X 0x288
+
+#define RST_DEVICES_L 0x004
+#define RST_DEVICES_H 0x008
+#define RST_DEVICES_U 0x00C
+#define RST_DFLL_DVCO 0x2F4
+#define RST_DEVICES_V 0x358
+#define RST_DEVICES_W 0x35C
+#define RST_DEVICES_X 0x28C
+#define RST_DEVICES_SET_L 0x300
+#define RST_DEVICES_CLR_L 0x304
+#define RST_DEVICES_SET_H 0x308
+#define RST_DEVICES_CLR_H 0x30c
+#define RST_DEVICES_SET_U 0x310
+#define RST_DEVICES_CLR_U 0x314
+#define RST_DEVICES_SET_V 0x430
+#define RST_DEVICES_CLR_V 0x434
+#define RST_DEVICES_SET_W 0x438
+#define RST_DEVICES_CLR_W 0x43c
+#define RST_DEVICES_SET_X 0x290
+#define RST_DEVICES_CLR_X 0x294
+
/* Global data of Tegra CPU CAR ops */
static struct tegra_cpu_car_ops dummy_car_ops;
struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;
+int *periph_clk_enb_refcnt;
+static int periph_banks;
+static struct clk **clks;
+static int clk_num;
+static struct clk_onecell_data clk_data;
+
+static struct tegra_clk_periph_regs periph_regs[] = {
+ [0] = {
+ .enb_reg = CLK_OUT_ENB_L,
+ .enb_set_reg = CLK_OUT_ENB_SET_L,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_L,
+ .rst_reg = RST_DEVICES_L,
+ .rst_set_reg = RST_DEVICES_SET_L,
+ .rst_clr_reg = RST_DEVICES_CLR_L,
+ },
+ [1] = {
+ .enb_reg = CLK_OUT_ENB_H,
+ .enb_set_reg = CLK_OUT_ENB_SET_H,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_H,
+ .rst_reg = RST_DEVICES_H,
+ .rst_set_reg = RST_DEVICES_SET_H,
+ .rst_clr_reg = RST_DEVICES_CLR_H,
+ },
+ [2] = {
+ .enb_reg = CLK_OUT_ENB_U,
+ .enb_set_reg = CLK_OUT_ENB_SET_U,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_U,
+ .rst_reg = RST_DEVICES_U,
+ .rst_set_reg = RST_DEVICES_SET_U,
+ .rst_clr_reg = RST_DEVICES_CLR_U,
+ },
+ [3] = {
+ .enb_reg = CLK_OUT_ENB_V,
+ .enb_set_reg = CLK_OUT_ENB_SET_V,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_V,
+ .rst_reg = RST_DEVICES_V,
+ .rst_set_reg = RST_DEVICES_SET_V,
+ .rst_clr_reg = RST_DEVICES_CLR_V,
+ },
+ [4] = {
+ .enb_reg = CLK_OUT_ENB_W,
+ .enb_set_reg = CLK_OUT_ENB_SET_W,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_W,
+ .rst_reg = RST_DEVICES_W,
+ .rst_set_reg = RST_DEVICES_SET_W,
+ .rst_clr_reg = RST_DEVICES_CLR_W,
+ },
+ [5] = {
+ .enb_reg = CLK_OUT_ENB_X,
+ .enb_set_reg = CLK_OUT_ENB_SET_X,
+ .enb_clr_reg = CLK_OUT_ENB_CLR_X,
+ .rst_reg = RST_DEVICES_X,
+ .rst_set_reg = RST_DEVICES_SET_X,
+ .rst_clr_reg = RST_DEVICES_CLR_X,
+ },
+};
+
+static void __iomem *clk_base;
+
+static int tegra_clk_rst_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ /*
+ * If peripheral is on the APB bus then we must read the APB bus to
+ * flush the write operation in apb bus. This will avoid peripheral
+ * access after disabling clock. Since the reset driver has no
+ * knowledge of which reset IDs represent which devices, simply do
+ * this all the time.
+ */
+ tegra_read_chipid();
+
+ writel_relaxed(BIT(id % 32),
+ clk_base + periph_regs[id / 32].rst_set_reg);
+
+ return 0;
+}
+
+static int tegra_clk_rst_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ writel_relaxed(BIT(id % 32),
+ clk_base + periph_regs[id / 32].rst_clr_reg);
+
+ return 0;
+}
+
+struct tegra_clk_periph_regs *get_reg_bank(int clkid)
+{
+ int reg_bank = clkid / 32;
+
+ if (reg_bank < periph_banks)
+ return &periph_regs[reg_bank];
+ else {
+ WARN_ON(1);
+ return NULL;
+ }
+}
+
+struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks)
+{
+ clk_base = regs;
+
+ if (WARN_ON(banks > ARRAY_SIZE(periph_regs)))
+ return NULL;
+
+ periph_clk_enb_refcnt = kzalloc(32 * banks *
+ sizeof(*periph_clk_enb_refcnt), GFP_KERNEL);
+ if (!periph_clk_enb_refcnt)
+ return NULL;
+
+ periph_banks = banks;
+
+ clks = kzalloc(num * sizeof(struct clk *), GFP_KERNEL);
+ if (!clks)
+ kfree(periph_clk_enb_refcnt);
+
+ clk_num = num;
+
+ return clks;
+}
+
void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max)
{
@@ -74,6 +236,58 @@
}
}
+static struct reset_control_ops rst_ops = {
+ .assert = tegra_clk_rst_assert,
+ .deassert = tegra_clk_rst_deassert,
+};
+
+static struct reset_controller_dev rst_ctlr = {
+ .ops = &rst_ops,
+ .owner = THIS_MODULE,
+ .of_reset_n_cells = 1,
+};
+
+void __init tegra_add_of_provider(struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < clk_num; i++) {
+ if (IS_ERR(clks[i])) {
+ pr_err
+ ("Tegra clk %d: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+ }
+ if (!clks[i])
+ clks[i] = ERR_PTR(-EINVAL);
+ }
+
+ clk_data.clks = clks;
+ clk_data.clk_num = clk_num;
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ rst_ctlr.of_node = np;
+ rst_ctlr.nr_resets = clk_num * 32;
+ reset_controller_register(&rst_ctlr);
+}
+
+void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++, dev_clks++)
+ clk_register_clkdev(clks[dev_clks->dt_id], dev_clks->con_id,
+ dev_clks->dev_id);
+}
+
+struct clk ** __init tegra_lookup_dt_id(int clk_id,
+ struct tegra_clk *tegra_clk)
+{
+ if (tegra_clk[clk_id].present)
+ return &clks[tegra_clk[clk_id].dt_id];
+ else
+ return NULL;
+}
+
tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
void __init tegra_clocks_apply_init_table(void)
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 07cfacd..16ec8d6 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -37,6 +37,8 @@
container_of(_hw, struct tegra_clk_sync_source, hw)
extern const struct clk_ops tegra_clk_sync_source_ops;
+extern int *periph_clk_enb_refcnt;
+
struct clk *tegra_clk_register_sync_source(const char *name,
unsigned long fixed_rate, unsigned long max_rate);
@@ -188,12 +190,15 @@
u32 ext_misc_reg[3];
u32 pmc_divnm_reg;
u32 pmc_divp_reg;
+ u32 flags;
int stepa_shift;
int stepb_shift;
int lock_delay;
int max_p;
struct pdiv_map *pdiv_tohw;
struct div_nmp *div_nmp;
+ struct tegra_clk_pll_freq_table *freq_table;
+ unsigned long fixed_rate;
};
/**
@@ -233,10 +238,7 @@
struct clk_hw hw;
void __iomem *clk_base;
void __iomem *pmc;
- u32 flags;
- unsigned long fixed_rate;
spinlock_t *lock;
- struct tegra_clk_pll_freq_table *freq_table;
struct tegra_clk_pll_params *params;
};
@@ -258,56 +260,49 @@
extern const struct clk_ops tegra_clk_plle_ops;
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+ unsigned long flags, struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock);
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+ unsigned long flags, struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock);
struct clk *tegra_clk_register_pllxc(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
struct clk *tegra_clk_register_pllm(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
struct clk *tegra_clk_register_pllc(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
struct clk *tegra_clk_register_pllre(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
- unsigned long flags, unsigned long fixed_rate,
+ unsigned long flags,
struct tegra_clk_pll_params *pll_params,
- u32 pll_flags,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock, unsigned long parent_rate);
struct clk *tegra_clk_register_plle_tegra114(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
- unsigned long fixed_rate,
struct tegra_clk_pll_params *pll_params,
- struct tegra_clk_pll_freq_table *freq_table,
spinlock_t *lock);
+struct clk *tegra_clk_register_pllss(const char *name, const char *parent_name,
+ void __iomem *clk_base, unsigned long flags,
+ struct tegra_clk_pll_params *pll_params,
+ spinlock_t *lock);
+
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
@@ -395,13 +390,13 @@
#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
#define TEGRA_PERIPH_ON_APB BIT(2)
#define TEGRA_PERIPH_WAR_1005168 BIT(3)
+#define TEGRA_PERIPH_NO_DIV BIT(4)
+#define TEGRA_PERIPH_NO_GATE BIT(5)
-void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
extern const struct clk_ops tegra_clk_periph_gate_ops;
struct clk *tegra_clk_register_periph_gate(const char *name,
const char *parent_name, u8 gate_flags, void __iomem *clk_base,
- unsigned long flags, int clk_num,
- struct tegra_clk_periph_regs *pregs, int *enable_refcnt);
+ unsigned long flags, int clk_num, int *enable_refcnt);
/**
* struct clk-periph - peripheral clock
@@ -443,26 +438,26 @@
#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags, \
_div_shift, _div_width, _div_frac_width, \
- _div_flags, _clk_num, _enb_refcnt, _regs, \
- _gate_flags, _table) \
+ _div_flags, _clk_num,\
+ _gate_flags, _table, _lock) \
{ \
.mux = { \
.flags = _mux_flags, \
.shift = _mux_shift, \
.mask = _mux_mask, \
.table = _table, \
+ .lock = _lock, \
}, \
.divider = { \
.flags = _div_flags, \
.shift = _div_shift, \
.width = _div_width, \
.frac_width = _div_frac_width, \
+ .lock = _lock, \
}, \
.gate = { \
.flags = _gate_flags, \
.clk_num = _clk_num, \
- .enable_refcnt = _enb_refcnt, \
- .regs = _regs, \
}, \
.mux_ops = &clk_mux_ops, \
.div_ops = &tegra_clk_frac_div_ops, \
@@ -472,7 +467,10 @@
struct tegra_periph_init_data {
const char *name;
int clk_id;
- const char **parent_names;
+ union {
+ const char **parent_names;
+ const char *parent_name;
+ } p;
int num_parents;
struct tegra_clk_periph periph;
u32 offset;
@@ -483,20 +481,19 @@
#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
_mux_shift, _mux_mask, _mux_flags, _div_shift, \
- _div_width, _div_frac_width, _div_flags, _regs, \
- _clk_num, _enb_refcnt, _gate_flags, _clk_id, _table,\
- _flags) \
+ _div_width, _div_frac_width, _div_flags, \
+ _clk_num, _gate_flags, _clk_id, _table, \
+ _flags, _lock) \
{ \
.name = _name, \
.clk_id = _clk_id, \
- .parent_names = _parent_names, \
+ .p.parent_names = _parent_names, \
.num_parents = ARRAY_SIZE(_parent_names), \
.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, \
_mux_flags, _div_shift, \
_div_width, _div_frac_width, \
_div_flags, _clk_num, \
- _enb_refcnt, _regs, \
- _gate_flags, _table), \
+ _gate_flags, _table, _lock), \
.offset = _offset, \
.con_id = _con_id, \
.dev_id = _dev_id, \
@@ -505,13 +502,13 @@
#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\
_mux_shift, _mux_width, _mux_flags, _div_shift, \
- _div_width, _div_frac_width, _div_flags, _regs, \
- _clk_num, _enb_refcnt, _gate_flags, _clk_id) \
+ _div_width, _div_frac_width, _div_flags, \
+ _clk_num, _gate_flags, _clk_id) \
TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
_mux_shift, BIT(_mux_width) - 1, _mux_flags, \
_div_shift, _div_width, _div_frac_width, _div_flags, \
- _regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\
- NULL, 0)
+ _clk_num, _gate_flags, _clk_id,\
+ NULL, 0, NULL)
/**
* struct clk_super_mux - super clock
@@ -581,12 +578,49 @@
}, \
}
+struct tegra_clk {
+ int dt_id;
+ bool present;
+};
+
+struct tegra_devclk {
+ int dt_id;
+ char *dev_id;
+ char *con_id;
+};
+
void tegra_init_from_table(struct tegra_clk_init_table *tbl,
struct clk *clks[], int clk_max);
void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max);
+struct tegra_clk_periph_regs *get_reg_bank(int clkid);
+struct clk **tegra_clk_init(void __iomem *clk_base, int num, int periph_banks);
+
+struct clk **tegra_lookup_dt_id(int clk_id, struct tegra_clk *tegra_clk);
+
+void tegra_add_of_provider(struct device_node *np);
+void tegra_register_devclks(struct tegra_devclk *dev_clks, int num);
+
+void tegra_audio_clk_init(void __iomem *clk_base,
+ void __iomem *pmc_base, struct tegra_clk *tegra_clks,
+ struct tegra_clk_pll_params *pll_params);
+
+void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base,
+ struct tegra_clk *tegra_clks,
+ struct tegra_clk_pll_params *pll_params);
+
+void tegra_pmc_clk_init(void __iomem *pmc_base, struct tegra_clk *tegra_clks);
+void tegra_fixed_clk_init(struct tegra_clk *tegra_clks);
+int tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *tegra_clks,
+ unsigned long *input_freqs, int num,
+ unsigned long *osc_freq,
+ unsigned long *pll_ref_freq);
+void tegra_super_clk_gen4_init(void __iomem *clk_base,
+ void __iomem *pmc_base, struct tegra_clk *tegra_clks,
+ struct tegra_clk_pll_params *pll_params);
+
void tegra114_clock_tune_cpu_trimmers_high(void);
void tegra114_clock_tune_cpu_trimmers_low(void);
void tegra114_clock_tune_cpu_trimmers_init(void);
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 62b0de6..48f76bc 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -71,6 +71,10 @@
MCT_L1_IRQ,
MCT_L2_IRQ,
MCT_L3_IRQ,
+ MCT_L4_IRQ,
+ MCT_L5_IRQ,
+ MCT_L6_IRQ,
+ MCT_L7_IRQ,
MCT_NR_IRQS,
};
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index ed7b73b..f00b5c9c 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -20,7 +20,6 @@
#include <linux/jiffies.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <linux/sched_clock.h>
#include <asm/mach/time.h>
@@ -103,7 +102,7 @@
return 0;
}
-void nmdk_clkevt_reset(void)
+static void nmdk_clkevt_reset(void)
{
if (clkevt_periodic) {
/* Timer: configure load and background-load, and fire it up */
@@ -144,7 +143,7 @@
}
}
-void nmdk_clksrc_reset(void)
+static void nmdk_clksrc_reset(void)
{
/* Disable */
writel(0, mtu_base + MTU_CR(0));
@@ -192,8 +191,8 @@
.dev_id = &nmdk_clkevt,
};
-static void __init __nmdk_timer_init(void __iomem *base, int irq,
- struct clk *pclk, struct clk *clk)
+static void __init nmdk_timer_init(void __iomem *base, int irq,
+ struct clk *pclk, struct clk *clk)
{
unsigned long rate;
@@ -245,18 +244,6 @@
register_current_timer_delay(&mtu_delay_timer);
}
-void __init nmdk_timer_init(void __iomem *base, int irq)
-{
- struct clk *clk0, *pclk0;
-
- pclk0 = clk_get_sys("mtu0", "apb_pclk");
- BUG_ON(IS_ERR(pclk0));
- clk0 = clk_get_sys("mtu0", NULL);
- BUG_ON(IS_ERR(clk0));
-
- __nmdk_timer_init(base, irq, pclk0, clk0);
-}
-
static void __init nmdk_timer_of_init(struct device_node *node)
{
struct clk *pclk;
@@ -280,7 +267,7 @@
if (irq <= 0)
panic("Can't parse IRQ");
- __nmdk_timer_init(base, irq, pclk, clk);
+ nmdk_timer_init(base, irq, pclk, clk);
}
CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
nmdk_timer_of_init);
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 0965e98..940341a 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -634,12 +634,18 @@
static void sh_cmt_clock_event_suspend(struct clock_event_device *ced)
{
- pm_genpd_syscore_poweroff(&ced_to_sh_cmt(ced)->pdev->dev);
+ struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+ pm_genpd_syscore_poweroff(&p->pdev->dev);
+ clk_unprepare(p->clk);
}
static void sh_cmt_clock_event_resume(struct clock_event_device *ced)
{
- pm_genpd_syscore_poweron(&ced_to_sh_cmt(ced)->pdev->dev);
+ struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+ clk_prepare(p->clk);
+ pm_genpd_syscore_poweron(&p->pdev->dev);
}
static void sh_cmt_register_clockevent(struct sh_cmt_priv *p,
@@ -737,6 +743,10 @@
goto err2;
}
+ ret = clk_prepare(p->clk);
+ if (ret < 0)
+ goto err3;
+
if (res2 && (resource_size(res2) == 4)) {
/* assume both CMSTR and CMCSR to be 32-bit */
p->read_control = sh_cmt_read32;
@@ -773,19 +783,21 @@
cfg->clocksource_rating);
if (ret) {
dev_err(&p->pdev->dev, "registration failed\n");
- goto err3;
+ goto err4;
}
p->cs_enabled = false;
ret = setup_irq(irq, &p->irqaction);
if (ret) {
dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
- goto err3;
+ goto err4;
}
platform_set_drvdata(pdev, p);
return 0;
+err4:
+ clk_unprepare(p->clk);
err3:
clk_put(p->clk);
err2:
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index ea806bd..24095ff 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -535,11 +535,41 @@
}
EXPORT_SYMBOL_GPL(dma_get_slave_channel);
+struct dma_chan *dma_get_any_slave_channel(struct dma_device *device)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ int err;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* lock against __dma_request_channel */
+ mutex_lock(&dma_list_mutex);
+
+ chan = private_candidate(&mask, device, NULL, NULL);
+ if (chan) {
+ err = dma_chan_get(chan);
+ if (err) {
+ pr_debug("%s: failed to get %s: (%d)\n",
+ __func__, dma_chan_name(chan), err);
+ chan = NULL;
+ }
+ }
+
+ mutex_unlock(&dma_list_mutex);
+
+ return chan;
+}
+EXPORT_SYMBOL_GPL(dma_get_any_slave_channel);
+
/**
* __dma_request_channel - try to allocate an exclusive channel
* @mask: capabilities that the channel must satisfy
* @fn: optional callback to disposition available channels
* @fn_param: opaque parameter to pass to dma_filter_fn
+ *
+ * Returns pointer to appropriate DMA channel on success or NULL.
*/
struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
dma_filter_fn fn, void *fn_param)
@@ -591,18 +621,43 @@
* dma_request_slave_channel - try to allocate an exclusive slave channel
* @dev: pointer to client device structure
* @name: slave channel name
+ *
+ * Returns pointer to appropriate DMA channel on success or an error pointer.
*/
-struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name)
+struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
+ const char *name)
{
+ struct dma_chan *chan;
+
/* If device-tree is present get slave info from here */
if (dev->of_node)
return of_dma_request_slave_channel(dev->of_node, name);
/* If device was enumerated by ACPI get slave info from here */
- if (ACPI_HANDLE(dev))
- return acpi_dma_request_slave_chan_by_name(dev, name);
+ if (ACPI_HANDLE(dev)) {
+ chan = acpi_dma_request_slave_chan_by_name(dev, name);
+ if (chan)
+ return chan;
+ }
- return NULL;
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(dma_request_slave_channel_reason);
+
+/**
+ * dma_request_slave_channel - try to allocate an exclusive slave channel
+ * @dev: pointer to client device structure
+ * @name: slave channel name
+ *
+ * Returns pointer to appropriate DMA channel on success or NULL.
+ */
+struct dma_chan *dma_request_slave_channel(struct device *dev,
+ const char *name)
+{
+ struct dma_chan *ch = dma_request_slave_channel_reason(dev, name);
+ if (IS_ERR(ch))
+ return NULL;
+ return ch;
}
EXPORT_SYMBOL_GPL(dma_request_slave_channel);
diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index dcb1e05..2998f1b 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -893,33 +893,17 @@
struct of_dma *ofdma)
{
struct mmp_pdma_device *d = ofdma->of_dma_data;
- struct dma_chan *chan, *candidate;
+ struct dma_chan *chan;
+ struct mmp_pdma_chan *c;
-retry:
- candidate = NULL;
-
- /* walk the list of channels registered with the current instance and
- * find one that is currently unused */
- list_for_each_entry(chan, &d->device.channels, device_node)
- if (chan->client_count == 0) {
- candidate = chan;
- break;
- }
-
- if (!candidate)
+ chan = dma_get_any_slave_channel(&d->device);
+ if (!chan)
return NULL;
- /* dma_get_slave_channel will return NULL if we lost a race between
- * the lookup and the reservation */
- chan = dma_get_slave_channel(candidate);
+ c = to_mmp_pdma_chan(chan);
+ c->drcmr = dma_spec->args[0];
- if (chan) {
- struct mmp_pdma_chan *c = to_mmp_pdma_chan(chan);
- c->drcmr = dma_spec->args[0];
- return chan;
- }
-
- goto retry;
+ return chan;
}
static int mmp_pdma_probe(struct platform_device *op)
diff --git a/drivers/dma/of-dma.c b/drivers/dma/of-dma.c
index 0b88dd3..e8fe9dc 100644
--- a/drivers/dma/of-dma.c
+++ b/drivers/dma/of-dma.c
@@ -143,7 +143,7 @@
* @np: device node to get DMA request from
* @name: name of desired channel
*
- * Returns pointer to appropriate dma channel on success or NULL on error.
+ * Returns pointer to appropriate DMA channel on success or an error pointer.
*/
struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
const char *name)
@@ -152,17 +152,18 @@
struct of_dma *ofdma;
struct dma_chan *chan;
int count, i;
+ int ret_no_channel = -ENODEV;
if (!np || !name) {
pr_err("%s: not enough information provided\n", __func__);
- return NULL;
+ return ERR_PTR(-ENODEV);
}
count = of_property_count_strings(np, "dma-names");
if (count < 0) {
pr_err("%s: dma-names property of node '%s' missing or empty\n",
__func__, np->full_name);
- return NULL;
+ return ERR_PTR(-ENODEV);
}
for (i = 0; i < count; i++) {
@@ -172,10 +173,12 @@
mutex_lock(&of_dma_lock);
ofdma = of_dma_find_controller(&dma_spec);
- if (ofdma)
+ if (ofdma) {
chan = ofdma->of_dma_xlate(&dma_spec, ofdma);
- else
+ } else {
+ ret_no_channel = -EPROBE_DEFER;
chan = NULL;
+ }
mutex_unlock(&of_dma_lock);
@@ -185,7 +188,7 @@
return chan;
}
- return NULL;
+ return ERR_PTR(ret_no_channel);
}
/**
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index b8c031b..00a2de9 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2409,6 +2409,7 @@
#define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1)
#define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
#define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
+#define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1)
static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
@@ -2446,6 +2447,9 @@
cfg.use_fixed_channel = true;
}
+ if (D40_DT_FLAGS_HIGH_PRIO(flags))
+ cfg.high_priority = true;
+
return dma_request_channel(cap, stedma40_filter, &cfg);
}
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 73654e3..d11bb36 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1,7 +1,7 @@
/*
* DMA driver for Nvidia's Tegra20 APB DMA controller.
*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -29,11 +29,12 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_dma.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include <linux/slab.h>
-#include <linux/clk/tegra.h>
#include "dmaengine.h"
@@ -199,6 +200,7 @@
void *callback_param;
/* Channel-slave specific configuration */
+ unsigned int slave_id;
struct dma_slave_config dma_sconfig;
struct tegra_dma_channel_regs channel_reg;
};
@@ -208,6 +210,7 @@
struct dma_device dma_dev;
struct device *dev;
struct clk *dma_clk;
+ struct reset_control *rst;
spinlock_t global_lock;
void __iomem *base_addr;
const struct tegra_dma_chip_data *chip_data;
@@ -339,6 +342,8 @@
}
memcpy(&tdc->dma_sconfig, sconfig, sizeof(*sconfig));
+ if (!tdc->slave_id)
+ tdc->slave_id = sconfig->slave_id;
tdc->config_init = true;
return 0;
}
@@ -941,7 +946,7 @@
ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
csr |= TEGRA_APBDMA_CSR_ONCE | TEGRA_APBDMA_CSR_FLOW;
- csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
+ csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
if (flags & DMA_PREP_INTERRUPT)
csr |= TEGRA_APBDMA_CSR_IE_EOC;
@@ -1085,7 +1090,7 @@
csr |= TEGRA_APBDMA_CSR_FLOW;
if (flags & DMA_PREP_INTERRUPT)
csr |= TEGRA_APBDMA_CSR_IE_EOC;
- csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
+ csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
@@ -1205,6 +1210,25 @@
kfree(sg_req);
}
clk_disable_unprepare(tdma->dma_clk);
+
+ tdc->slave_id = 0;
+}
+
+static struct dma_chan *tegra_dma_of_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct tegra_dma *tdma = ofdma->of_dma_data;
+ struct dma_chan *chan;
+ struct tegra_dma_channel *tdc;
+
+ chan = dma_get_any_slave_channel(&tdma->dma_dev);
+ if (!chan)
+ return NULL;
+
+ tdc = to_tegra_dma_chan(chan);
+ tdc->slave_id = dma_spec->args[0];
+
+ return chan;
}
/* Tegra20 specific DMA controller information */
@@ -1282,6 +1306,12 @@
return PTR_ERR(tdma->dma_clk);
}
+ tdma->rst = devm_reset_control_get(&pdev->dev, "dma");
+ if (IS_ERR(tdma->rst)) {
+ dev_err(&pdev->dev, "Error: Missing reset\n");
+ return PTR_ERR(tdma->rst);
+ }
+
spin_lock_init(&tdma->global_lock);
pm_runtime_enable(&pdev->dev);
@@ -1302,9 +1332,9 @@
}
/* Reset DMA controller */
- tegra_periph_reset_assert(tdma->dma_clk);
+ reset_control_assert(tdma->rst);
udelay(2);
- tegra_periph_reset_deassert(tdma->dma_clk);
+ reset_control_deassert(tdma->rst);
/* Enable global DMA registers */
tdma_write(tdma, TEGRA_APBDMA_GENERAL, TEGRA_APBDMA_GENERAL_ENABLE);
@@ -1376,10 +1406,20 @@
goto err_irq;
}
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ tegra_dma_of_xlate, tdma);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Tegra20 APB DMA OF registration failed %d\n", ret);
+ goto err_unregister_dma_dev;
+ }
+
dev_info(&pdev->dev, "Tegra20 APB DMA driver register %d channels\n",
cdata->nr_channels);
return 0;
+err_unregister_dma_dev:
+ dma_async_device_unregister(&tdma->dma_dev);
err_irq:
while (--i >= 0) {
struct tegra_dma_channel *tdc = &tdma->channels[i];
diff --git a/drivers/gpu/drm/tegra/Kconfig b/drivers/gpu/drm/tegra/Kconfig
index 8961ba6..8db9b3b 100644
--- a/drivers/gpu/drm/tegra/Kconfig
+++ b/drivers/gpu/drm/tegra/Kconfig
@@ -2,6 +2,7 @@
bool "NVIDIA Tegra DRM"
depends on ARCH_TEGRA || ARCH_MULTIPLATFORM
depends on DRM
+ depends on RESET_CONTROLLER
select TEGRA_HOST1X
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index ae1cb31e..cd7f1e4 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -8,8 +8,8 @@
*/
#include <linux/clk.h>
-#include <linux/clk/tegra.h>
#include <linux/debugfs.h>
+#include <linux/reset.h>
#include "dc.h"
#include "drm.h"
@@ -712,7 +712,7 @@
unsigned long value;
/* hardware initialization */
- tegra_periph_reset_deassert(dc->clk);
+ reset_control_deassert(dc->rst);
usleep_range(10000, 20000);
if (dc->pipe)
@@ -1187,6 +1187,12 @@
return PTR_ERR(dc->clk);
}
+ dc->rst = devm_reset_control_get(&pdev->dev, "dc");
+ if (IS_ERR(dc->rst)) {
+ dev_err(&pdev->dev, "failed to get reset\n");
+ return PTR_ERR(dc->rst);
+ }
+
err = clk_prepare_enable(dc->clk);
if (err < 0)
return err;
diff --git a/drivers/gpu/drm/tegra/drm.h b/drivers/gpu/drm/tegra/drm.h
index fdfe259..f717c18 100644
--- a/drivers/gpu/drm/tegra/drm.h
+++ b/drivers/gpu/drm/tegra/drm.h
@@ -19,6 +19,8 @@
#include <drm/drm_fb_helper.h>
#include <drm/drm_fixed.h>
+struct reset_control;
+
struct tegra_fb {
struct drm_framebuffer base;
struct tegra_bo **planes;
@@ -93,6 +95,7 @@
int pipe;
struct clk *clk;
+ struct reset_control *rst;
void __iomem *regs;
int irq;
diff --git a/drivers/gpu/drm/tegra/gr3d.c b/drivers/gpu/drm/tegra/gr3d.c
index 4cec8f5..0cbb24b 100644
--- a/drivers/gpu/drm/tegra/gr3d.c
+++ b/drivers/gpu/drm/tegra/gr3d.c
@@ -11,6 +11,7 @@
#include <linux/host1x.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include <linux/tegra-powergate.h>
#include "drm.h"
@@ -22,6 +23,8 @@
struct host1x_channel *channel;
struct clk *clk_secondary;
struct clk *clk;
+ struct reset_control *rst_secondary;
+ struct reset_control *rst;
DECLARE_BITMAP(addr_regs, GR3D_NUM_REGS);
};
@@ -255,15 +258,29 @@
return PTR_ERR(gr3d->clk);
}
+ gr3d->rst = devm_reset_control_get(&pdev->dev, "3d");
+ if (IS_ERR(gr3d->rst)) {
+ dev_err(&pdev->dev, "cannot get reset\n");
+ return PTR_ERR(gr3d->rst);
+ }
+
if (of_device_is_compatible(np, "nvidia,tegra30-gr3d")) {
gr3d->clk_secondary = devm_clk_get(&pdev->dev, "3d2");
if (IS_ERR(gr3d->clk)) {
dev_err(&pdev->dev, "cannot get secondary clock\n");
return PTR_ERR(gr3d->clk);
}
+
+ gr3d->rst_secondary = devm_reset_control_get(&pdev->dev,
+ "3d2");
+ if (IS_ERR(gr3d->rst_secondary)) {
+ dev_err(&pdev->dev, "cannot get secondary reset\n");
+ return PTR_ERR(gr3d->rst_secondary);
+ }
}
- err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D, gr3d->clk);
+ err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D, gr3d->clk,
+ gr3d->rst);
if (err < 0) {
dev_err(&pdev->dev, "failed to power up 3D unit\n");
return err;
@@ -271,7 +288,8 @@
if (gr3d->clk_secondary) {
err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_3D1,
- gr3d->clk_secondary);
+ gr3d->clk_secondary,
+ gr3d->rst_secondary);
if (err < 0) {
dev_err(&pdev->dev,
"failed to power up secondary 3D unit\n");
diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index 0cd9bc2..7f6253e 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -8,10 +8,10 @@
*/
#include <linux/clk.h>
-#include <linux/clk/tegra.h>
#include <linux/debugfs.h>
#include <linux/hdmi.h>
#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
#include "hdmi.h"
#include "drm.h"
@@ -49,6 +49,7 @@
struct clk *clk_parent;
struct clk *clk;
+ struct reset_control *rst;
const struct tegra_hdmi_config *config;
@@ -731,9 +732,9 @@
return err;
}
- tegra_periph_reset_assert(hdmi->clk);
+ reset_control_assert(hdmi->rst);
usleep_range(1000, 2000);
- tegra_periph_reset_deassert(hdmi->clk);
+ reset_control_deassert(hdmi->rst);
tegra_dc_writel(dc, VSYNC_H_POSITION(1),
DC_DISP_DISP_TIMING_OPTIONS);
@@ -912,7 +913,7 @@
{
struct tegra_hdmi *hdmi = to_hdmi(output);
- tegra_periph_reset_assert(hdmi->clk);
+ reset_control_assert(hdmi->rst);
clk_disable(hdmi->clk);
regulator_disable(hdmi->pll);
@@ -1338,6 +1339,12 @@
return PTR_ERR(hdmi->clk);
}
+ hdmi->rst = devm_reset_control_get(&pdev->dev, "hdmi");
+ if (IS_ERR(hdmi->rst)) {
+ dev_err(&pdev->dev, "failed to get reset\n");
+ return PTR_ERR(hdmi->rst);
+ }
+
err = clk_prepare(hdmi->clk);
if (err < 0)
return err;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index e661ede..9704537 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -27,7 +27,7 @@
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/module.h>
-#include <linux/clk/tegra.h>
+#include <linux/reset.h>
#include <asm/unaligned.h>
@@ -160,6 +160,7 @@
struct i2c_adapter adapter;
struct clk *div_clk;
struct clk *fast_clk;
+ struct reset_control *rst;
void __iomem *base;
int cont_id;
int irq;
@@ -415,9 +416,9 @@
return err;
}
- tegra_periph_reset_assert(i2c_dev->div_clk);
+ reset_control_assert(i2c_dev->rst);
udelay(2);
- tegra_periph_reset_deassert(i2c_dev->div_clk);
+ reset_control_deassert(i2c_dev->rst);
if (i2c_dev->is_dvc)
tegra_dvc_init(i2c_dev);
@@ -743,6 +744,12 @@
i2c_dev->cont_id = pdev->id;
i2c_dev->dev = &pdev->dev;
+ i2c_dev->rst = devm_reset_control_get(&pdev->dev, "i2c");
+ if (IS_ERR(i2c_dev->rst)) {
+ dev_err(&pdev->dev, "missing controller reset");
+ return PTR_ERR(i2c_dev->rst);
+ }
+
ret = of_property_read_u32(i2c_dev->dev->of_node, "clock-frequency",
&i2c_dev->bus_clk_rate);
if (ret)
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index 8508879..9757a58 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -31,7 +31,7 @@
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/input/matrix_keypad.h>
-#include <linux/clk/tegra.h>
+#include <linux/reset.h>
#include <linux/err.h>
#define KBC_MAX_KPENT 8
@@ -116,6 +116,7 @@
u32 wakeup_key;
struct timer_list timer;
struct clk *clk;
+ struct reset_control *rst;
const struct tegra_kbc_hw_support *hw_support;
int max_keys;
int num_rows_and_columns;
@@ -373,9 +374,9 @@
clk_prepare_enable(kbc->clk);
/* Reset the KBC controller to clear all previous status.*/
- tegra_periph_reset_assert(kbc->clk);
+ reset_control_assert(kbc->rst);
udelay(100);
- tegra_periph_reset_deassert(kbc->clk);
+ reset_control_assert(kbc->rst);
udelay(100);
tegra_kbc_config_pins(kbc);
@@ -663,6 +664,12 @@
return PTR_ERR(kbc->clk);
}
+ kbc->rst = devm_reset_control_get(&pdev->dev, "kbc");
+ if (IS_ERR(kbc->rst)) {
+ dev_err(&pdev->dev, "failed to get keyboard reset\n");
+ return PTR_ERR(kbc->rst);
+ }
+
/*
* The time delay between two consecutive reads of the FIFO is
* the sum of the repeat time and the time taken for scanning
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0afbbbc..0175041 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -25,7 +25,6 @@
*/
#include <linux/clk.h>
-#include <linux/clk/tegra.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/interrupt.h>
@@ -39,6 +38,7 @@
#include <linux/of_platform.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/tegra-cpuidle.h>
@@ -259,10 +259,13 @@
struct clk *pex_clk;
struct clk *afi_clk;
- struct clk *pcie_xclk;
struct clk *pll_e;
struct clk *cml_clk;
+ struct reset_control *pex_rst;
+ struct reset_control *afi_rst;
+ struct reset_control *pcie_xrst;
+
struct tegra_msi msi;
struct list_head ports;
@@ -858,7 +861,7 @@
pads_writel(pcie, value, PADS_CTL);
/* take the PCIe interface module out of reset */
- tegra_periph_reset_deassert(pcie->pcie_xclk);
+ reset_control_deassert(pcie->pcie_xrst);
/* finally enable PCIe */
value = afi_readl(pcie, AFI_CONFIGURATION);
@@ -891,9 +894,9 @@
/* TODO: disable and unprepare clocks? */
- tegra_periph_reset_assert(pcie->pcie_xclk);
- tegra_periph_reset_assert(pcie->afi_clk);
- tegra_periph_reset_assert(pcie->pex_clk);
+ reset_control_assert(pcie->pcie_xrst);
+ reset_control_assert(pcie->afi_rst);
+ reset_control_assert(pcie->pex_rst);
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
@@ -921,9 +924,9 @@
const struct tegra_pcie_soc_data *soc = pcie->soc_data;
int err;
- tegra_periph_reset_assert(pcie->pcie_xclk);
- tegra_periph_reset_assert(pcie->afi_clk);
- tegra_periph_reset_assert(pcie->pex_clk);
+ reset_control_assert(pcie->pcie_xrst);
+ reset_control_assert(pcie->afi_rst);
+ reset_control_assert(pcie->pex_rst);
tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
@@ -952,13 +955,14 @@
}
err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
- pcie->pex_clk);
+ pcie->pex_clk,
+ pcie->pex_rst);
if (err) {
dev_err(pcie->dev, "powerup sequence failed: %d\n", err);
return err;
}
- tegra_periph_reset_deassert(pcie->afi_clk);
+ reset_control_deassert(pcie->afi_rst);
err = clk_prepare_enable(pcie->afi_clk);
if (err < 0) {
@@ -996,10 +1000,6 @@
if (IS_ERR(pcie->afi_clk))
return PTR_ERR(pcie->afi_clk);
- pcie->pcie_xclk = devm_clk_get(pcie->dev, "pcie_xclk");
- if (IS_ERR(pcie->pcie_xclk))
- return PTR_ERR(pcie->pcie_xclk);
-
pcie->pll_e = devm_clk_get(pcie->dev, "pll_e");
if (IS_ERR(pcie->pll_e))
return PTR_ERR(pcie->pll_e);
@@ -1013,6 +1013,23 @@
return 0;
}
+static int tegra_pcie_resets_get(struct tegra_pcie *pcie)
+{
+ pcie->pex_rst = devm_reset_control_get(pcie->dev, "pex");
+ if (IS_ERR(pcie->pex_rst))
+ return PTR_ERR(pcie->pex_rst);
+
+ pcie->afi_rst = devm_reset_control_get(pcie->dev, "afi");
+ if (IS_ERR(pcie->afi_rst))
+ return PTR_ERR(pcie->afi_rst);
+
+ pcie->pcie_xrst = devm_reset_control_get(pcie->dev, "pcie_x");
+ if (IS_ERR(pcie->pcie_xrst))
+ return PTR_ERR(pcie->pcie_xrst);
+
+ return 0;
+}
+
static int tegra_pcie_get_resources(struct tegra_pcie *pcie)
{
struct platform_device *pdev = to_platform_device(pcie->dev);
@@ -1025,6 +1042,12 @@
return err;
}
+ err = tegra_pcie_resets_get(pcie);
+ if (err) {
+ dev_err(&pdev->dev, "failed to get resets: %d\n", err);
+ return err;
+ }
+
err = tegra_pcie_power_on(pcie);
if (err) {
dev_err(&pdev->dev, "failed to power up: %d\n", err);
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 33f9dc1..30fcb89 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -116,15 +116,22 @@
config PINCTRL_IMX27
bool "IMX27 pinctrl driver"
- depends on OF
depends on SOC_IMX27
select PINCTRL_IMX1_CORE
help
Say Y here to enable the imx27 pinctrl driver
+
+config PINCTRL_IMX25
+ bool "IMX25 pinctrl driver"
+ depends on OF
+ depends on SOC_IMX25
+ select PINCTRL_IMX
+ help
+ Say Y here to enable the imx25 pinctrl driver
+
config PINCTRL_IMX35
bool "IMX35 pinctrl driver"
- depends on OF
depends on SOC_IMX35
select PINCTRL_IMX
help
@@ -132,7 +139,6 @@
config PINCTRL_IMX50
bool "IMX50 pinctrl driver"
- depends on OF
depends on SOC_IMX50
select PINCTRL_IMX
help
@@ -140,7 +146,6 @@
config PINCTRL_IMX51
bool "IMX51 pinctrl driver"
- depends on OF
depends on SOC_IMX51
select PINCTRL_IMX
help
@@ -148,7 +153,6 @@
config PINCTRL_IMX53
bool "IMX53 pinctrl driver"
- depends on OF
depends on SOC_IMX53
select PINCTRL_IMX
help
@@ -156,7 +160,6 @@
config PINCTRL_IMX6Q
bool "IMX6Q/DL pinctrl driver"
- depends on OF
depends on SOC_IMX6Q
select PINCTRL_IMX
help
@@ -164,7 +167,6 @@
config PINCTRL_IMX6SL
bool "IMX6SL pinctrl driver"
- depends on OF
depends on SOC_IMX6SL
select PINCTRL_IMX
help
@@ -172,7 +174,6 @@
config PINCTRL_VF610
bool "Freescale Vybrid VF610 pinctrl driver"
- depends on OF
depends on SOC_VF610
select PINCTRL_IMX
help
@@ -202,6 +203,17 @@
bool
select PINCTRL_MXS
+config PINCTRL_MSM
+ bool
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+
+config PINCTRL_MSM8X74
+ bool "Qualcomm 8x74 pin controller driver"
+ depends on OF && OF_IRQ
+ select PINCTRL_MSM
+
config PINCTRL_NOMADIK
bool "Nomadik pin controller driver"
depends on ARCH_U8500 || ARCH_NOMADIK
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 4f7be29..5d91e4b 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -34,7 +34,10 @@
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
+obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
+obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o
+obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index b8fcc38..4187fe5 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -28,12 +28,6 @@
{
const struct pinconf_ops *ops = pctldev->desc->confops;
- /* We must be able to read out pin status */
- if (!ops->pin_config_get && !ops->pin_config_group_get) {
- dev_err(pctldev->dev,
- "pinconf must be able to read out pin status\n");
- return -EINVAL;
- }
/* We have to be able to config the pins in SOME way */
if (!ops->pin_config_set && !ops->pin_config_group_set) {
dev_err(pctldev->dev,
@@ -67,9 +61,9 @@
const struct pinconf_ops *ops = pctldev->desc->confops;
if (!ops || !ops->pin_config_get) {
- dev_err(pctldev->dev, "cannot get pin configuration, missing "
+ dev_dbg(pctldev->dev, "cannot get pin configuration, missing "
"pin_config_get() function in driver\n");
- return -EINVAL;
+ return -ENOTSUPP;
}
return ops->pin_config_get(pctldev, pin, config);
@@ -93,10 +87,10 @@
ops = pctldev->desc->confops;
if (!ops || !ops->pin_config_group_get) {
- dev_err(pctldev->dev, "cannot get configuration for pin "
+ dev_dbg(pctldev->dev, "cannot get configuration for pin "
"group, missing group config get function in "
"driver\n");
- ret = -EINVAL;
+ ret = -ENOTSUPP;
goto unlock;
}
@@ -305,9 +299,6 @@
const struct pinconf_ops *ops = pctldev->desc->confops;
unsigned i, pin;
- if (!ops || !ops->pin_config_get)
- return 0;
-
seq_puts(s, "Pin config settings per pin\n");
seq_puts(s, "Format: pin (name): configs\n");
@@ -356,9 +347,6 @@
unsigned ngroups = pctlops->get_groups_count(pctldev);
unsigned selector = 0;
- if (!ops || !ops->pin_config_group_get)
- return 0;
-
seq_puts(s, "Pin config settings per pin group\n");
seq_puts(s, "Format: group (name): configs\n");
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index a7549c4..b0b78f3 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -118,7 +118,7 @@
};
/**
- * struct at91_pinctrl_mux_ops - describes an At91 mux ops group
+ * struct at91_pinctrl_mux_ops - describes an AT91 mux ops group
* on new IP with support for periph C and D the way to mux in
* periph A and B has changed
* So provide the right call back
@@ -722,7 +722,8 @@
unsigned pin;
int div;
- dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, *config);
+ *config = 0;
+ dev_dbg(info->dev, "%s:%d, pin_id=%d", __func__, __LINE__, pin_id);
pio = pin_to_controller(info, pin_to_bank(pin_id));
pin = pin_id % MAX_NB_GPIO_PER_BANK;
@@ -1396,7 +1397,7 @@
chained_irq_enter(chip, desc);
for (;;) {
/* Reading ISR acks pending (edge triggered) GPIO interrupts.
- * When there none are pending, we're finished unless we need
+ * When there are none pending, we're finished unless we need
* to process multiple banks (like ID_PIOCDE on sam9263).
*/
isr = readl_relaxed(pio + PIO_ISR) & readl_relaxed(pio + PIO_IMR);
@@ -1505,7 +1506,7 @@
prev = gpio_chips[at91_gpio->pioc_idx - 1];
/* The top level handler handles one bank of GPIOs, except
- * on some SoC it can handles up to three...
+ * on some SoC it can handle up to three...
* We only set up the handler for the first of the list.
*/
if (prev && prev->next == at91_gpio)
diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
index 2832576..5888066 100644
--- a/drivers/pinctrl/pinctrl-baytrail.c
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -286,13 +286,19 @@
spin_lock_irqsave(&vg->lock, flags);
for (i = 0; i < vg->chip.ngpio; i++) {
+ const char *label;
offs = vg->range->pins[i] * 16;
conf0 = readl(vg->reg_base + offs + BYT_CONF0_REG);
val = readl(vg->reg_base + offs + BYT_VAL_REG);
+ label = gpiochip_is_requested(chip, i);
+ if (!label)
+ label = "Unrequested";
+
seq_printf(s,
- " gpio-%-3d %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s\n",
+ " gpio-%-3d (%-20.20s) %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s\n",
i,
+ label,
val & BYT_INPUT_EN ? " " : "in",
val & BYT_OUTPUT_EN ? " " : "out",
val & BYT_LEVEL ? "hi" : "lo",
@@ -366,11 +372,33 @@
{
}
+static unsigned int byt_irq_startup(struct irq_data *d)
+{
+ struct byt_gpio *vg = irq_data_get_irq_chip_data(d);
+
+ if (gpio_lock_as_irq(&vg->chip, irqd_to_hwirq(d)))
+ dev_err(vg->chip.dev,
+ "unable to lock HW IRQ %lu for IRQ\n",
+ irqd_to_hwirq(d));
+ byt_irq_unmask(d);
+ return 0;
+}
+
+static void byt_irq_shutdown(struct irq_data *d)
+{
+ struct byt_gpio *vg = irq_data_get_irq_chip_data(d);
+
+ byt_irq_mask(d);
+ gpio_unlock_as_irq(&vg->chip, irqd_to_hwirq(d));
+}
+
static struct irq_chip byt_irqchip = {
.name = "BYT-GPIO",
.irq_mask = byt_irq_mask,
.irq_unmask = byt_irq_unmask,
.irq_set_type = byt_irq_type,
+ .irq_startup = byt_irq_startup,
+ .irq_shutdown = byt_irq_shutdown,
};
static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
diff --git a/drivers/pinctrl/pinctrl-imx1-core.c b/drivers/pinctrl/pinctrl-imx1-core.c
index f77914a..17aecde 100644
--- a/drivers/pinctrl/pinctrl-imx1-core.c
+++ b/drivers/pinctrl/pinctrl-imx1-core.c
@@ -638,6 +638,13 @@
return -EINVAL;
}
+ ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+ if (ret) {
+ pinctrl_unregister(ipctl->pctl);
+ dev_err(&pdev->dev, "Failed to populate subdevices\n");
+ return ret;
+ }
+
dev_info(&pdev->dev, "initialized IMX pinctrl driver\n");
return 0;
diff --git a/drivers/pinctrl/pinctrl-imx25.c b/drivers/pinctrl/pinctrl-imx25.c
new file mode 100644
index 0000000..1aae1b6
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-imx25.c
@@ -0,0 +1,351 @@
+/*
+ * imx25 pinctrl driver.
+ *
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This driver was mostly copied from the imx51 pinctrl driver which has:
+ *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro, Inc.
+ *
+ * Author: Denis Carikli <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+enum imx25_pads {
+ MX25_PAD_RESERVE0 = 1,
+ MX25_PAD_RESERVE1 = 2,
+ MX25_PAD_A10 = 3,
+ MX25_PAD_A13 = 4,
+ MX25_PAD_A14 = 5,
+ MX25_PAD_A15 = 6,
+ MX25_PAD_A16 = 7,
+ MX25_PAD_A17 = 8,
+ MX25_PAD_A18 = 9,
+ MX25_PAD_A19 = 10,
+ MX25_PAD_A20 = 11,
+ MX25_PAD_A21 = 12,
+ MX25_PAD_A22 = 13,
+ MX25_PAD_A23 = 14,
+ MX25_PAD_A24 = 15,
+ MX25_PAD_A25 = 16,
+ MX25_PAD_EB0 = 17,
+ MX25_PAD_EB1 = 18,
+ MX25_PAD_OE = 19,
+ MX25_PAD_CS0 = 20,
+ MX25_PAD_CS1 = 21,
+ MX25_PAD_CS4 = 22,
+ MX25_PAD_CS5 = 23,
+ MX25_PAD_NF_CE0 = 24,
+ MX25_PAD_ECB = 25,
+ MX25_PAD_LBA = 26,
+ MX25_PAD_BCLK = 27,
+ MX25_PAD_RW = 28,
+ MX25_PAD_NFWE_B = 29,
+ MX25_PAD_NFRE_B = 30,
+ MX25_PAD_NFALE = 31,
+ MX25_PAD_NFCLE = 32,
+ MX25_PAD_NFWP_B = 33,
+ MX25_PAD_NFRB = 34,
+ MX25_PAD_D15 = 35,
+ MX25_PAD_D14 = 36,
+ MX25_PAD_D13 = 37,
+ MX25_PAD_D12 = 38,
+ MX25_PAD_D11 = 39,
+ MX25_PAD_D10 = 40,
+ MX25_PAD_D9 = 41,
+ MX25_PAD_D8 = 42,
+ MX25_PAD_D7 = 43,
+ MX25_PAD_D6 = 44,
+ MX25_PAD_D5 = 45,
+ MX25_PAD_D4 = 46,
+ MX25_PAD_D3 = 47,
+ MX25_PAD_D2 = 48,
+ MX25_PAD_D1 = 49,
+ MX25_PAD_D0 = 50,
+ MX25_PAD_LD0 = 51,
+ MX25_PAD_LD1 = 52,
+ MX25_PAD_LD2 = 53,
+ MX25_PAD_LD3 = 54,
+ MX25_PAD_LD4 = 55,
+ MX25_PAD_LD5 = 56,
+ MX25_PAD_LD6 = 57,
+ MX25_PAD_LD7 = 58,
+ MX25_PAD_LD8 = 59,
+ MX25_PAD_LD9 = 60,
+ MX25_PAD_LD10 = 61,
+ MX25_PAD_LD11 = 62,
+ MX25_PAD_LD12 = 63,
+ MX25_PAD_LD13 = 64,
+ MX25_PAD_LD14 = 65,
+ MX25_PAD_LD15 = 66,
+ MX25_PAD_HSYNC = 67,
+ MX25_PAD_VSYNC = 68,
+ MX25_PAD_LSCLK = 69,
+ MX25_PAD_OE_ACD = 70,
+ MX25_PAD_CONTRAST = 71,
+ MX25_PAD_PWM = 72,
+ MX25_PAD_CSI_D2 = 73,
+ MX25_PAD_CSI_D3 = 74,
+ MX25_PAD_CSI_D4 = 75,
+ MX25_PAD_CSI_D5 = 76,
+ MX25_PAD_CSI_D6 = 77,
+ MX25_PAD_CSI_D7 = 78,
+ MX25_PAD_CSI_D8 = 79,
+ MX25_PAD_CSI_D9 = 80,
+ MX25_PAD_CSI_MCLK = 81,
+ MX25_PAD_CSI_VSYNC = 82,
+ MX25_PAD_CSI_HSYNC = 83,
+ MX25_PAD_CSI_PIXCLK = 84,
+ MX25_PAD_I2C1_CLK = 85,
+ MX25_PAD_I2C1_DAT = 86,
+ MX25_PAD_CSPI1_MOSI = 87,
+ MX25_PAD_CSPI1_MISO = 88,
+ MX25_PAD_CSPI1_SS0 = 89,
+ MX25_PAD_CSPI1_SS1 = 90,
+ MX25_PAD_CSPI1_SCLK = 91,
+ MX25_PAD_CSPI1_RDY = 92,
+ MX25_PAD_UART1_RXD = 93,
+ MX25_PAD_UART1_TXD = 94,
+ MX25_PAD_UART1_RTS = 95,
+ MX25_PAD_UART1_CTS = 96,
+ MX25_PAD_UART2_RXD = 97,
+ MX25_PAD_UART2_TXD = 98,
+ MX25_PAD_UART2_RTS = 99,
+ MX25_PAD_UART2_CTS = 100,
+ MX25_PAD_SD1_CMD = 101,
+ MX25_PAD_SD1_CLK = 102,
+ MX25_PAD_SD1_DATA0 = 103,
+ MX25_PAD_SD1_DATA1 = 104,
+ MX25_PAD_SD1_DATA2 = 105,
+ MX25_PAD_SD1_DATA3 = 106,
+ MX25_PAD_KPP_ROW0 = 107,
+ MX25_PAD_KPP_ROW1 = 108,
+ MX25_PAD_KPP_ROW2 = 109,
+ MX25_PAD_KPP_ROW3 = 110,
+ MX25_PAD_KPP_COL0 = 111,
+ MX25_PAD_KPP_COL1 = 112,
+ MX25_PAD_KPP_COL2 = 113,
+ MX25_PAD_KPP_COL3 = 114,
+ MX25_PAD_FEC_MDC = 115,
+ MX25_PAD_FEC_MDIO = 116,
+ MX25_PAD_FEC_TDATA0 = 117,
+ MX25_PAD_FEC_TDATA1 = 118,
+ MX25_PAD_FEC_TX_EN = 119,
+ MX25_PAD_FEC_RDATA0 = 120,
+ MX25_PAD_FEC_RDATA1 = 121,
+ MX25_PAD_FEC_RX_DV = 122,
+ MX25_PAD_FEC_TX_CLK = 123,
+ MX25_PAD_RTCK = 124,
+ MX25_PAD_DE_B = 125,
+ MX25_PAD_GPIO_A = 126,
+ MX25_PAD_GPIO_B = 127,
+ MX25_PAD_GPIO_C = 128,
+ MX25_PAD_GPIO_D = 129,
+ MX25_PAD_GPIO_E = 130,
+ MX25_PAD_GPIO_F = 131,
+ MX25_PAD_EXT_ARMCLK = 132,
+ MX25_PAD_UPLL_BYPCLK = 133,
+ MX25_PAD_VSTBY_REQ = 134,
+ MX25_PAD_VSTBY_ACK = 135,
+ MX25_PAD_POWER_FAIL = 136,
+ MX25_PAD_CLKO = 137,
+ MX25_PAD_BOOT_MODE0 = 138,
+ MX25_PAD_BOOT_MODE1 = 139,
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx25_pinctrl_pads[] = {
+ IMX_PINCTRL_PIN(MX25_PAD_RESERVE0),
+ IMX_PINCTRL_PIN(MX25_PAD_RESERVE1),
+ IMX_PINCTRL_PIN(MX25_PAD_A10),
+ IMX_PINCTRL_PIN(MX25_PAD_A13),
+ IMX_PINCTRL_PIN(MX25_PAD_A14),
+ IMX_PINCTRL_PIN(MX25_PAD_A15),
+ IMX_PINCTRL_PIN(MX25_PAD_A16),
+ IMX_PINCTRL_PIN(MX25_PAD_A17),
+ IMX_PINCTRL_PIN(MX25_PAD_A18),
+ IMX_PINCTRL_PIN(MX25_PAD_A19),
+ IMX_PINCTRL_PIN(MX25_PAD_A20),
+ IMX_PINCTRL_PIN(MX25_PAD_A21),
+ IMX_PINCTRL_PIN(MX25_PAD_A22),
+ IMX_PINCTRL_PIN(MX25_PAD_A23),
+ IMX_PINCTRL_PIN(MX25_PAD_A24),
+ IMX_PINCTRL_PIN(MX25_PAD_A25),
+ IMX_PINCTRL_PIN(MX25_PAD_EB0),
+ IMX_PINCTRL_PIN(MX25_PAD_EB1),
+ IMX_PINCTRL_PIN(MX25_PAD_OE),
+ IMX_PINCTRL_PIN(MX25_PAD_CS0),
+ IMX_PINCTRL_PIN(MX25_PAD_CS1),
+ IMX_PINCTRL_PIN(MX25_PAD_CS4),
+ IMX_PINCTRL_PIN(MX25_PAD_CS5),
+ IMX_PINCTRL_PIN(MX25_PAD_NF_CE0),
+ IMX_PINCTRL_PIN(MX25_PAD_ECB),
+ IMX_PINCTRL_PIN(MX25_PAD_LBA),
+ IMX_PINCTRL_PIN(MX25_PAD_BCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_RW),
+ IMX_PINCTRL_PIN(MX25_PAD_NFWE_B),
+ IMX_PINCTRL_PIN(MX25_PAD_NFRE_B),
+ IMX_PINCTRL_PIN(MX25_PAD_NFALE),
+ IMX_PINCTRL_PIN(MX25_PAD_NFCLE),
+ IMX_PINCTRL_PIN(MX25_PAD_NFWP_B),
+ IMX_PINCTRL_PIN(MX25_PAD_NFRB),
+ IMX_PINCTRL_PIN(MX25_PAD_D15),
+ IMX_PINCTRL_PIN(MX25_PAD_D14),
+ IMX_PINCTRL_PIN(MX25_PAD_D13),
+ IMX_PINCTRL_PIN(MX25_PAD_D12),
+ IMX_PINCTRL_PIN(MX25_PAD_D11),
+ IMX_PINCTRL_PIN(MX25_PAD_D10),
+ IMX_PINCTRL_PIN(MX25_PAD_D9),
+ IMX_PINCTRL_PIN(MX25_PAD_D8),
+ IMX_PINCTRL_PIN(MX25_PAD_D7),
+ IMX_PINCTRL_PIN(MX25_PAD_D6),
+ IMX_PINCTRL_PIN(MX25_PAD_D5),
+ IMX_PINCTRL_PIN(MX25_PAD_D4),
+ IMX_PINCTRL_PIN(MX25_PAD_D3),
+ IMX_PINCTRL_PIN(MX25_PAD_D2),
+ IMX_PINCTRL_PIN(MX25_PAD_D1),
+ IMX_PINCTRL_PIN(MX25_PAD_D0),
+ IMX_PINCTRL_PIN(MX25_PAD_LD0),
+ IMX_PINCTRL_PIN(MX25_PAD_LD1),
+ IMX_PINCTRL_PIN(MX25_PAD_LD2),
+ IMX_PINCTRL_PIN(MX25_PAD_LD3),
+ IMX_PINCTRL_PIN(MX25_PAD_LD4),
+ IMX_PINCTRL_PIN(MX25_PAD_LD5),
+ IMX_PINCTRL_PIN(MX25_PAD_LD6),
+ IMX_PINCTRL_PIN(MX25_PAD_LD7),
+ IMX_PINCTRL_PIN(MX25_PAD_LD8),
+ IMX_PINCTRL_PIN(MX25_PAD_LD9),
+ IMX_PINCTRL_PIN(MX25_PAD_LD10),
+ IMX_PINCTRL_PIN(MX25_PAD_LD11),
+ IMX_PINCTRL_PIN(MX25_PAD_LD12),
+ IMX_PINCTRL_PIN(MX25_PAD_LD13),
+ IMX_PINCTRL_PIN(MX25_PAD_LD14),
+ IMX_PINCTRL_PIN(MX25_PAD_LD15),
+ IMX_PINCTRL_PIN(MX25_PAD_HSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_VSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_LSCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_OE_ACD),
+ IMX_PINCTRL_PIN(MX25_PAD_CONTRAST),
+ IMX_PINCTRL_PIN(MX25_PAD_PWM),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D2),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D3),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D4),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D5),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D6),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D7),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D8),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D9),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_MCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_VSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_HSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_PIXCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_I2C1_CLK),
+ IMX_PINCTRL_PIN(MX25_PAD_I2C1_DAT),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MOSI),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MISO),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS0),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS1),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_RDY),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_RXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_TXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_RTS),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_CTS),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_RXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_TXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_RTS),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_CTS),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_CMD),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_CLK),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA0),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA1),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA2),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA3),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW0),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW1),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW2),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW3),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL0),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL1),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL2),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL3),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_MDC),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_MDIO),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA0),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA1),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_EN),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA0),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA1),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_RX_DV),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_CLK),
+ IMX_PINCTRL_PIN(MX25_PAD_RTCK),
+ IMX_PINCTRL_PIN(MX25_PAD_DE_B),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_A),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_B),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_C),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_D),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_E),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_F),
+ IMX_PINCTRL_PIN(MX25_PAD_EXT_ARMCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_UPLL_BYPCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_VSTBY_REQ),
+ IMX_PINCTRL_PIN(MX25_PAD_VSTBY_ACK),
+ IMX_PINCTRL_PIN(MX25_PAD_POWER_FAIL),
+ IMX_PINCTRL_PIN(MX25_PAD_CLKO),
+ IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE0),
+ IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE1),
+};
+
+static struct imx_pinctrl_soc_info imx25_pinctrl_info = {
+ .pins = imx25_pinctrl_pads,
+ .npins = ARRAY_SIZE(imx25_pinctrl_pads),
+};
+
+static struct of_device_id imx25_pinctrl_of_match[] = {
+ { .compatible = "fsl,imx25-iomuxc", },
+ { /* sentinel */ }
+};
+
+static int imx25_pinctrl_probe(struct platform_device *pdev)
+{
+ return imx_pinctrl_probe(pdev, &imx25_pinctrl_info);
+}
+
+static struct platform_driver imx25_pinctrl_driver = {
+ .driver = {
+ .name = "imx25-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(imx25_pinctrl_of_match),
+ },
+ .probe = imx25_pinctrl_probe,
+ .remove = imx_pinctrl_remove,
+};
+
+static int __init imx25_pinctrl_init(void)
+{
+ return platform_driver_register(&imx25_pinctrl_driver);
+}
+arch_initcall(imx25_pinctrl_init);
+
+static void __exit imx25_pinctrl_exit(void)
+{
+ platform_driver_unregister(&imx25_pinctrl_driver);
+}
+module_exit(imx25_pinctrl_exit);
+MODULE_AUTHOR("Denis Carikli <denis@eukrea.com>");
+MODULE_DESCRIPTION("Freescale IMX25 pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
new file mode 100644
index 0000000..28b90ab
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-msm.c
@@ -0,0 +1,1028 @@
+/*
+ * Copyright (c) 2013, Sony Mobile Communications AB.
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-msm.h"
+#include "pinctrl-utils.h"
+
+/**
+ * struct msm_pinctrl - state for a pinctrl-msm device
+ * @dev: device handle.
+ * @pctrl: pinctrl handle.
+ * @domain: irqdomain handle.
+ * @chip: gpiochip handle.
+ * @irq: parent irq for the TLMM irq_chip.
+ * @lock: Spinlock to protect register resources as well
+ * as msm_pinctrl data structures.
+ * @enabled_irqs: Bitmap of currently enabled irqs.
+ * @dual_edge_irqs: Bitmap of irqs that need sw emulated dual edge
+ * detection.
+ * @wake_irqs: Bitmap of irqs with requested as wakeup source.
+ * @soc; Reference to soc_data of platform specific data.
+ * @regs: Base address for the TLMM register map.
+ */
+struct msm_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pctrl;
+ struct irq_domain *domain;
+ struct gpio_chip chip;
+ unsigned irq;
+
+ spinlock_t lock;
+
+ unsigned long *enabled_irqs;
+ unsigned long *dual_edge_irqs;
+ unsigned long *wake_irqs;
+
+ const struct msm_pinctrl_soc_data *soc;
+ void __iomem *regs;
+};
+
+static int msm_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctrl->soc->ngroups;
+}
+
+static const char *msm_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned group)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctrl->soc->groups[group].name;
+}
+
+static int msm_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned group,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = pctrl->soc->groups[group].pins;
+ *num_pins = pctrl->soc->groups[group].npins;
+ return 0;
+}
+
+static struct pinctrl_ops msm_pinctrl_ops = {
+ .get_groups_count = msm_get_groups_count,
+ .get_group_name = msm_get_group_name,
+ .get_group_pins = msm_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int msm_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctrl->soc->nfunctions;
+}
+
+static const char *msm_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctrl->soc->functions[function].name;
+}
+
+static int msm_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pctrl->soc->functions[function].groups;
+ *num_groups = pctrl->soc->functions[function].ngroups;
+ return 0;
+}
+
+static int msm_pinmux_enable(struct pinctrl_dev *pctldev,
+ unsigned function,
+ unsigned group)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ const struct msm_pingroup *g;
+ unsigned long flags;
+ u32 val;
+ int i;
+
+ g = &pctrl->soc->groups[group];
+
+ if (WARN_ON(g->mux_bit < 0))
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(g->funcs); i++) {
+ if (g->funcs[i] == function)
+ break;
+ }
+
+ if (WARN_ON(i == ARRAY_SIZE(g->funcs)))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ val = readl(pctrl->regs + g->ctl_reg);
+ val &= ~(0x7 << g->mux_bit);
+ val |= i << g->mux_bit;
+ writel(val, pctrl->regs + g->ctl_reg);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ return 0;
+}
+
+static void msm_pinmux_disable(struct pinctrl_dev *pctldev,
+ unsigned function,
+ unsigned group)
+{
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ const struct msm_pingroup *g;
+ unsigned long flags;
+ u32 val;
+
+ g = &pctrl->soc->groups[group];
+
+ if (WARN_ON(g->mux_bit < 0))
+ return;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ /* Clear the mux bits to select gpio mode */
+ val = readl(pctrl->regs + g->ctl_reg);
+ val &= ~(0x7 << g->mux_bit);
+ writel(val, pctrl->regs + g->ctl_reg);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
+static struct pinmux_ops msm_pinmux_ops = {
+ .get_functions_count = msm_get_functions_count,
+ .get_function_name = msm_get_function_name,
+ .get_function_groups = msm_get_function_groups,
+ .enable = msm_pinmux_enable,
+ .disable = msm_pinmux_disable,
+};
+
+static int msm_config_reg(struct msm_pinctrl *pctrl,
+ const struct msm_pingroup *g,
+ unsigned param,
+ unsigned *reg,
+ unsigned *mask,
+ unsigned *bit)
+{
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ *reg = g->ctl_reg;
+ *bit = g->pull_bit;
+ *mask = 3;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ *reg = g->ctl_reg;
+ *bit = g->pull_bit;
+ *mask = 3;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ *reg = g->ctl_reg;
+ *bit = g->pull_bit;
+ *mask = 3;
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ *reg = g->ctl_reg;
+ *bit = g->drv_bit;
+ *mask = 7;
+ break;
+ default:
+ dev_err(pctrl->dev, "Invalid config param %04x\n", param);
+ return -ENOTSUPP;
+ }
+
+ if (*reg < 0) {
+ dev_err(pctrl->dev, "Config param %04x not supported on group %s\n",
+ param, g->name);
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int msm_config_get(struct pinctrl_dev *pctldev,
+ unsigned int pin,
+ unsigned long *config)
+{
+ dev_err(pctldev->dev, "pin_config_set op not supported\n");
+ return -ENOTSUPP;
+}
+
+static int msm_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *configs, unsigned num_configs)
+{
+ dev_err(pctldev->dev, "pin_config_set op not supported\n");
+ return -ENOTSUPP;
+}
+
+#define MSM_NO_PULL 0
+#define MSM_PULL_DOWN 1
+#define MSM_PULL_UP 3
+
+static const unsigned msm_regval_to_drive[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+static const unsigned msm_drive_to_regval[] = { -1, -1, 0, -1, 1, -1, 2, -1, 3, -1, 4, -1, 5, -1, 6, -1, 7 };
+
+static int msm_config_group_get(struct pinctrl_dev *pctldev,
+ unsigned int group,
+ unsigned long *config)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ unsigned param = pinconf_to_config_param(*config);
+ unsigned mask;
+ unsigned arg;
+ unsigned bit;
+ unsigned reg;
+ int ret;
+ u32 val;
+
+ g = &pctrl->soc->groups[group];
+
+ ret = msm_config_reg(pctrl, g, param, ®, &mask, &bit);
+ if (ret < 0)
+ return ret;
+
+ val = readl(pctrl->regs + reg);
+ arg = (val >> bit) & mask;
+
+ /* Convert register value to pinconf value */
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ arg = arg == MSM_NO_PULL;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ arg = arg == MSM_PULL_DOWN;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ arg = arg == MSM_PULL_UP;
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = msm_regval_to_drive[arg];
+ break;
+ default:
+ dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
+ param);
+ return -EINVAL;
+ }
+
+ *config = pinconf_to_config_packed(param, arg);
+
+ return 0;
+}
+
+static int msm_config_group_set(struct pinctrl_dev *pctldev,
+ unsigned group,
+ unsigned long *configs,
+ unsigned num_configs)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+ unsigned long flags;
+ unsigned param;
+ unsigned mask;
+ unsigned arg;
+ unsigned bit;
+ unsigned reg;
+ int ret;
+ u32 val;
+ int i;
+
+ g = &pctrl->soc->groups[group];
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ ret = msm_config_reg(pctrl, g, param, ®, &mask, &bit);
+ if (ret < 0)
+ return ret;
+
+ /* Convert pinconf values to register values */
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ arg = MSM_NO_PULL;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ arg = MSM_PULL_DOWN;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ arg = MSM_PULL_UP;
+ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ /* Check for invalid values */
+ if (arg > ARRAY_SIZE(msm_drive_to_regval))
+ arg = -1;
+ else
+ arg = msm_drive_to_regval[arg];
+ break;
+ default:
+ dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
+ param);
+ return -EINVAL;
+ }
+
+ /* Range-check user-supplied value */
+ if (arg & ~mask) {
+ dev_err(pctrl->dev, "config %x: %x is invalid\n", param, arg);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+ val = readl(pctrl->regs + reg);
+ val &= ~(mask << bit);
+ val |= arg << bit;
+ writel(val, pctrl->regs + reg);
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+ }
+
+ return 0;
+}
+
+static struct pinconf_ops msm_pinconf_ops = {
+ .pin_config_get = msm_config_get,
+ .pin_config_set = msm_config_set,
+ .pin_config_group_get = msm_config_group_get,
+ .pin_config_group_set = msm_config_group_set,
+};
+
+static struct pinctrl_desc msm_pinctrl_desc = {
+ .pctlops = &msm_pinctrl_ops,
+ .pmxops = &msm_pinmux_ops,
+ .confops = &msm_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = container_of(chip, struct msm_pinctrl, chip);
+ unsigned long flags;
+ u32 val;
+
+ if (WARN_ON(offset >= pctrl->soc->ngroups))
+ return -EINVAL;
+
+ g = &pctrl->soc->groups[offset];
+
+ if (WARN_ON(g->oe_bit < 0))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ val = readl(pctrl->regs + g->ctl_reg);
+ val &= ~BIT(g->oe_bit);
+ writel(val, pctrl->regs + g->ctl_reg);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ return 0;
+}
+
+static int msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = container_of(chip, struct msm_pinctrl, chip);
+ unsigned long flags;
+ u32 val;
+
+ if (WARN_ON(offset >= pctrl->soc->ngroups))
+ return -EINVAL;
+
+ g = &pctrl->soc->groups[offset];
+
+ if (WARN_ON(g->oe_bit < 0))
+ return -EINVAL;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ writel(value ? BIT(g->out_bit) : 0, pctrl->regs + g->io_reg);
+
+ val = readl(pctrl->regs + g->ctl_reg);
+ val |= BIT(g->oe_bit);
+ writel(val, pctrl->regs + g->ctl_reg);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ return 0;
+}
+
+static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = container_of(chip, struct msm_pinctrl, chip);
+ u32 val;
+
+ if (WARN_ON(offset >= pctrl->soc->ngroups))
+ return -EINVAL;
+
+ g = &pctrl->soc->groups[offset];
+
+ val = readl(pctrl->regs + g->io_reg);
+ return !!(val & BIT(g->in_bit));
+}
+
+static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = container_of(chip, struct msm_pinctrl, chip);
+ unsigned long flags;
+ u32 val;
+
+ if (WARN_ON(offset >= pctrl->soc->ngroups))
+ return;
+
+ g = &pctrl->soc->groups[offset];
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ val = readl(pctrl->regs + g->io_reg);
+ val |= BIT(g->out_bit);
+ writel(val, pctrl->regs + g->io_reg);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
+static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct msm_pinctrl *pctrl = container_of(chip, struct msm_pinctrl, chip);
+
+ return irq_find_mapping(pctrl->domain, offset);
+}
+
+static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+ return pinctrl_request_gpio(gpio);
+}
+
+static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+ return pinctrl_free_gpio(gpio);
+}
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/seq_file.h>
+
+static void msm_gpio_dbg_show_one(struct seq_file *s,
+ struct pinctrl_dev *pctldev,
+ struct gpio_chip *chip,
+ unsigned offset,
+ unsigned gpio)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = container_of(chip, struct msm_pinctrl, chip);
+ unsigned func;
+ int is_out;
+ int drive;
+ int pull;
+ u32 ctl_reg;
+
+ const char *pulls[] = {
+ "no pull",
+ "pull down",
+ "keeper",
+ "pull up"
+ };
+
+ g = &pctrl->soc->groups[offset];
+ ctl_reg = readl(pctrl->regs + g->ctl_reg);
+
+ is_out = !!(ctl_reg & BIT(g->oe_bit));
+ func = (ctl_reg >> g->mux_bit) & 7;
+ drive = (ctl_reg >> g->drv_bit) & 7;
+ pull = (ctl_reg >> g->pull_bit) & 3;
+
+ seq_printf(s, " %-8s: %-3s %d", g->name, is_out ? "out" : "in", func);
+ seq_printf(s, " %dmA", msm_regval_to_drive[drive]);
+ seq_printf(s, " %s", pulls[pull]);
+}
+
+static void msm_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ unsigned gpio = chip->base;
+ unsigned i;
+
+ for (i = 0; i < chip->ngpio; i++, gpio++) {
+ msm_gpio_dbg_show_one(s, NULL, chip, i, gpio);
+ seq_printf(s, "\n");
+ }
+}
+
+#else
+#define msm_gpio_dbg_show NULL
+#endif
+
+static struct gpio_chip msm_gpio_template = {
+ .direction_input = msm_gpio_direction_input,
+ .direction_output = msm_gpio_direction_output,
+ .get = msm_gpio_get,
+ .set = msm_gpio_set,
+ .to_irq = msm_gpio_to_irq,
+ .request = msm_gpio_request,
+ .free = msm_gpio_free,
+ .dbg_show = msm_gpio_dbg_show,
+};
+
+/* For dual-edge interrupts in software, since some hardware has no
+ * such support:
+ *
+ * At appropriate moments, this function may be called to flip the polarity
+ * settings of both-edge irq lines to try and catch the next edge.
+ *
+ * The attempt is considered successful if:
+ * - the status bit goes high, indicating that an edge was caught, or
+ * - the input value of the gpio doesn't change during the attempt.
+ * If the value changes twice during the process, that would cause the first
+ * test to fail but would force the second, as two opposite
+ * transitions would cause a detection no matter the polarity setting.
+ *
+ * The do-loop tries to sledge-hammer closed the timing hole between
+ * the initial value-read and the polarity-write - if the line value changes
+ * during that window, an interrupt is lost, the new polarity setting is
+ * incorrect, and the first success test will fail, causing a retry.
+ *
+ * Algorithm comes from Google's msmgpio driver.
+ */
+static void msm_gpio_update_dual_edge_pos(struct msm_pinctrl *pctrl,
+ const struct msm_pingroup *g,
+ struct irq_data *d)
+{
+ int loop_limit = 100;
+ unsigned val, val2, intstat;
+ unsigned pol;
+
+ do {
+ val = readl(pctrl->regs + g->io_reg) & BIT(g->in_bit);
+
+ pol = readl(pctrl->regs + g->intr_cfg_reg);
+ pol ^= BIT(g->intr_polarity_bit);
+ writel(pol, pctrl->regs + g->intr_cfg_reg);
+
+ val2 = readl(pctrl->regs + g->io_reg) & BIT(g->in_bit);
+ intstat = readl(pctrl->regs + g->intr_status_reg);
+ if (intstat || (val == val2))
+ return;
+ } while (loop_limit-- > 0);
+ dev_err(pctrl->dev, "dual-edge irq failed to stabilize, %#08x != %#08x\n",
+ val, val2);
+}
+
+static void msm_gpio_irq_mask(struct irq_data *d)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl;
+ unsigned long flags;
+ u32 val;
+
+ pctrl = irq_data_get_irq_chip_data(d);
+ if (!pctrl)
+ return;
+
+ if (WARN_ON(d->hwirq >= pctrl->soc->ngroups))
+ return;
+
+ g = &pctrl->soc->groups[d->hwirq];
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ val = readl(pctrl->regs + g->intr_cfg_reg);
+ val &= ~BIT(g->intr_enable_bit);
+ writel(val, pctrl->regs + g->intr_cfg_reg);
+
+ clear_bit(d->hwirq, pctrl->enabled_irqs);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
+static void msm_gpio_irq_unmask(struct irq_data *d)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl;
+ unsigned long flags;
+ u32 val;
+
+ pctrl = irq_data_get_irq_chip_data(d);
+ if (!pctrl)
+ return;
+
+ if (WARN_ON(d->hwirq >= pctrl->soc->ngroups))
+ return;
+
+ g = &pctrl->soc->groups[d->hwirq];
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ val = readl(pctrl->regs + g->intr_status_reg);
+ val &= ~BIT(g->intr_status_bit);
+ writel(val, pctrl->regs + g->intr_status_reg);
+
+ val = readl(pctrl->regs + g->intr_cfg_reg);
+ val |= BIT(g->intr_enable_bit);
+ writel(val, pctrl->regs + g->intr_cfg_reg);
+
+ set_bit(d->hwirq, pctrl->enabled_irqs);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
+static void msm_gpio_irq_ack(struct irq_data *d)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl;
+ unsigned long flags;
+ u32 val;
+
+ pctrl = irq_data_get_irq_chip_data(d);
+ if (!pctrl)
+ return;
+
+ if (WARN_ON(d->hwirq >= pctrl->soc->ngroups))
+ return;
+
+ g = &pctrl->soc->groups[d->hwirq];
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ val = readl(pctrl->regs + g->intr_status_reg);
+ val &= ~BIT(g->intr_status_bit);
+ writel(val, pctrl->regs + g->intr_status_reg);
+
+ if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
+ msm_gpio_update_dual_edge_pos(pctrl, g, d);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+}
+
+#define INTR_TARGET_PROC_APPS 4
+
+static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl;
+ unsigned long flags;
+ u32 val;
+
+ pctrl = irq_data_get_irq_chip_data(d);
+ if (!pctrl)
+ return -EINVAL;
+
+ if (WARN_ON(d->hwirq >= pctrl->soc->ngroups))
+ return -EINVAL;
+
+ g = &pctrl->soc->groups[d->hwirq];
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ /*
+ * For hw without possibility of detecting both edges
+ */
+ if (g->intr_detection_width == 1 && type == IRQ_TYPE_EDGE_BOTH)
+ set_bit(d->hwirq, pctrl->dual_edge_irqs);
+ else
+ clear_bit(d->hwirq, pctrl->dual_edge_irqs);
+
+ /* Route interrupts to application cpu */
+ val = readl(pctrl->regs + g->intr_target_reg);
+ val &= ~(7 << g->intr_target_bit);
+ val |= INTR_TARGET_PROC_APPS << g->intr_target_bit;
+ writel(val, pctrl->regs + g->intr_target_reg);
+
+ /* Update configuration for gpio.
+ * RAW_STATUS_EN is left on for all gpio irqs. Due to the
+ * internal circuitry of TLMM, toggling the RAW_STATUS
+ * could cause the INTR_STATUS to be set for EDGE interrupts.
+ */
+ val = readl(pctrl->regs + g->intr_cfg_reg);
+ val |= BIT(g->intr_raw_status_bit);
+ if (g->intr_detection_width == 2) {
+ val &= ~(3 << g->intr_detection_bit);
+ val &= ~(1 << g->intr_polarity_bit);
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ val |= 1 << g->intr_detection_bit;
+ val |= BIT(g->intr_polarity_bit);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ val |= 2 << g->intr_detection_bit;
+ val |= BIT(g->intr_polarity_bit);
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val |= 3 << g->intr_detection_bit;
+ val |= BIT(g->intr_polarity_bit);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val |= BIT(g->intr_polarity_bit);
+ break;
+ }
+ } else if (g->intr_detection_width == 1) {
+ val &= ~(1 << g->intr_detection_bit);
+ val &= ~(1 << g->intr_polarity_bit);
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ val |= BIT(g->intr_detection_bit);
+ val |= BIT(g->intr_polarity_bit);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ val |= BIT(g->intr_detection_bit);
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val |= BIT(g->intr_detection_bit);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val |= BIT(g->intr_polarity_bit);
+ break;
+ }
+ } else {
+ BUG();
+ }
+ writel(val, pctrl->regs + g->intr_cfg_reg);
+
+ if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
+ msm_gpio_update_dual_edge_pos(pctrl, g, d);
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+ __irq_set_handler_locked(d->irq, handle_level_irq);
+ else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ __irq_set_handler_locked(d->irq, handle_edge_irq);
+
+ return 0;
+}
+
+static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct msm_pinctrl *pctrl;
+ unsigned long flags;
+ unsigned ngpio;
+
+ pctrl = irq_data_get_irq_chip_data(d);
+ if (!pctrl)
+ return -EINVAL;
+
+ ngpio = pctrl->chip.ngpio;
+
+ spin_lock_irqsave(&pctrl->lock, flags);
+
+ if (on) {
+ if (bitmap_empty(pctrl->wake_irqs, ngpio))
+ enable_irq_wake(pctrl->irq);
+ set_bit(d->hwirq, pctrl->wake_irqs);
+ } else {
+ clear_bit(d->hwirq, pctrl->wake_irqs);
+ if (bitmap_empty(pctrl->wake_irqs, ngpio))
+ disable_irq_wake(pctrl->irq);
+ }
+
+ spin_unlock_irqrestore(&pctrl->lock, flags);
+
+ return 0;
+}
+
+static unsigned int msm_gpio_irq_startup(struct irq_data *d)
+{
+ struct msm_pinctrl *pctrl = irq_data_get_irq_chip_data(d);
+
+ if (gpio_lock_as_irq(&pctrl->chip, d->hwirq)) {
+ dev_err(pctrl->dev, "unable to lock HW IRQ %lu for IRQ\n",
+ d->hwirq);
+ }
+ msm_gpio_irq_unmask(d);
+ return 0;
+}
+
+static void msm_gpio_irq_shutdown(struct irq_data *d)
+{
+ struct msm_pinctrl *pctrl = irq_data_get_irq_chip_data(d);
+
+ msm_gpio_irq_mask(d);
+ gpio_unlock_as_irq(&pctrl->chip, d->hwirq);
+}
+
+static struct irq_chip msm_gpio_irq_chip = {
+ .name = "msmgpio",
+ .irq_mask = msm_gpio_irq_mask,
+ .irq_unmask = msm_gpio_irq_unmask,
+ .irq_ack = msm_gpio_irq_ack,
+ .irq_set_type = msm_gpio_irq_set_type,
+ .irq_set_wake = msm_gpio_irq_set_wake,
+ .irq_startup = msm_gpio_irq_startup,
+ .irq_shutdown = msm_gpio_irq_shutdown,
+};
+
+static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ const struct msm_pingroup *g;
+ struct msm_pinctrl *pctrl = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_get_chip(irq);
+ int irq_pin;
+ int handled = 0;
+ u32 val;
+ int i;
+
+ chained_irq_enter(chip, desc);
+
+ /*
+ * Each pin have it's own IRQ status register, so use
+ * enabled_irq bitmap to limit the number of reads.
+ */
+ for_each_set_bit(i, pctrl->enabled_irqs, pctrl->chip.ngpio) {
+ g = &pctrl->soc->groups[i];
+ val = readl(pctrl->regs + g->intr_status_reg);
+ if (val & BIT(g->intr_status_bit)) {
+ irq_pin = irq_find_mapping(pctrl->domain, i);
+ generic_handle_irq(irq_pin);
+ handled++;
+ }
+ }
+
+ /* No interrutps where flagged */
+ if (handled == 0)
+ handle_bad_irq(irq, desc);
+
+ chained_irq_exit(chip, desc);
+}
+
+static int msm_gpio_init(struct msm_pinctrl *pctrl)
+{
+ struct gpio_chip *chip;
+ int irq;
+ int ret;
+ int i;
+ int r;
+
+ chip = &pctrl->chip;
+ chip->base = 0;
+ chip->ngpio = pctrl->soc->ngpios;
+ chip->label = dev_name(pctrl->dev);
+ chip->dev = pctrl->dev;
+ chip->owner = THIS_MODULE;
+ chip->of_node = pctrl->dev->of_node;
+
+ pctrl->enabled_irqs = devm_kzalloc(pctrl->dev,
+ sizeof(unsigned long) * BITS_TO_LONGS(chip->ngpio),
+ GFP_KERNEL);
+ if (!pctrl->enabled_irqs) {
+ dev_err(pctrl->dev, "Failed to allocate enabled_irqs bitmap\n");
+ return -ENOMEM;
+ }
+
+ pctrl->dual_edge_irqs = devm_kzalloc(pctrl->dev,
+ sizeof(unsigned long) * BITS_TO_LONGS(chip->ngpio),
+ GFP_KERNEL);
+ if (!pctrl->dual_edge_irqs) {
+ dev_err(pctrl->dev, "Failed to allocate dual_edge_irqs bitmap\n");
+ return -ENOMEM;
+ }
+
+ pctrl->wake_irqs = devm_kzalloc(pctrl->dev,
+ sizeof(unsigned long) * BITS_TO_LONGS(chip->ngpio),
+ GFP_KERNEL);
+ if (!pctrl->wake_irqs) {
+ dev_err(pctrl->dev, "Failed to allocate wake_irqs bitmap\n");
+ return -ENOMEM;
+ }
+
+ ret = gpiochip_add(&pctrl->chip);
+ if (ret) {
+ dev_err(pctrl->dev, "Failed register gpiochip\n");
+ return ret;
+ }
+
+ ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio);
+ if (ret) {
+ dev_err(pctrl->dev, "Failed to add pin range\n");
+ return ret;
+ }
+
+ pctrl->domain = irq_domain_add_linear(pctrl->dev->of_node, chip->ngpio,
+ &irq_domain_simple_ops, NULL);
+ if (!pctrl->domain) {
+ dev_err(pctrl->dev, "Failed to register irq domain\n");
+ r = gpiochip_remove(&pctrl->chip);
+ return -ENOSYS;
+ }
+
+ for (i = 0; i < chip->ngpio; i++) {
+ irq = irq_create_mapping(pctrl->domain, i);
+ irq_set_chip_and_handler(irq, &msm_gpio_irq_chip, handle_edge_irq);
+ irq_set_chip_data(irq, pctrl);
+ }
+
+ irq_set_handler_data(pctrl->irq, pctrl);
+ irq_set_chained_handler(pctrl->irq, msm_gpio_irq_handler);
+
+ return 0;
+}
+
+int msm_pinctrl_probe(struct platform_device *pdev,
+ const struct msm_pinctrl_soc_data *soc_data)
+{
+ struct msm_pinctrl *pctrl;
+ struct resource *res;
+ int ret;
+
+ pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+ if (!pctrl) {
+ dev_err(&pdev->dev, "Can't allocate msm_pinctrl\n");
+ return -ENOMEM;
+ }
+ pctrl->dev = &pdev->dev;
+ pctrl->soc = soc_data;
+ pctrl->chip = msm_gpio_template;
+
+ spin_lock_init(&pctrl->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pctrl->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pctrl->regs))
+ return PTR_ERR(pctrl->regs);
+
+ pctrl->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (pctrl->irq < 0) {
+ dev_err(&pdev->dev, "No interrupt defined for msmgpio\n");
+ return pctrl->irq;
+ }
+
+ msm_pinctrl_desc.name = dev_name(&pdev->dev);
+ msm_pinctrl_desc.pins = pctrl->soc->pins;
+ msm_pinctrl_desc.npins = pctrl->soc->npins;
+ pctrl->pctrl = pinctrl_register(&msm_pinctrl_desc, &pdev->dev, pctrl);
+ if (!pctrl->pctrl) {
+ dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
+ return -ENODEV;
+ }
+
+ ret = msm_gpio_init(pctrl);
+ if (ret) {
+ pinctrl_unregister(pctrl->pctrl);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, pctrl);
+
+ dev_dbg(&pdev->dev, "Probed Qualcomm pinctrl driver\n");
+
+ return 0;
+}
+EXPORT_SYMBOL(msm_pinctrl_probe);
+
+int msm_pinctrl_remove(struct platform_device *pdev)
+{
+ struct msm_pinctrl *pctrl = platform_get_drvdata(pdev);
+ int ret;
+
+ irq_set_chained_handler(pctrl->irq, NULL);
+ irq_domain_remove(pctrl->domain);
+ ret = gpiochip_remove(&pctrl->chip);
+ pinctrl_unregister(pctrl->pctrl);
+
+ return 0;
+}
+EXPORT_SYMBOL(msm_pinctrl_remove);
+
diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h
new file mode 100644
index 0000000..206e782e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-msm.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (c) 2013, Sony Mobile Communications AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PINCTRL_MSM_H__
+#define __PINCTRL_MSM_H__
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/machine.h>
+
+/**
+ * struct msm_function - a pinmux function
+ * @name: Name of the pinmux function.
+ * @groups: List of pingroups for this function.
+ * @ngroups: Number of entries in @groups.
+ */
+struct msm_function {
+ const char *name;
+ const char * const *groups;
+ unsigned ngroups;
+};
+
+/**
+ * struct msm_pingroup - Qualcomm pingroup definition
+ * @name: Name of the pingroup.
+ * @pins: A list of pins assigned to this pingroup.
+ * @npins: Number of entries in @pins.
+ * @funcs: A list of pinmux functions that can be selected for
+ * this group. The index of the selected function is used
+ * for programming the function selector.
+ * Entries should be indices into the groups list of the
+ * struct msm_pinctrl_soc_data.
+ * @ctl_reg: Offset of the register holding control bits for this group.
+ * @io_reg: Offset of the register holding input/output bits for this group.
+ * @intr_cfg_reg: Offset of the register holding interrupt configuration bits.
+ * @intr_status_reg: Offset of the register holding the status bits for this group.
+ * @intr_target_reg: Offset of the register specifying routing of the interrupts
+ * from this group.
+ * @mux_bit: Offset in @ctl_reg for the pinmux function selection.
+ * @pull_bit: Offset in @ctl_reg for the bias configuration.
+ * @drv_bit: Offset in @ctl_reg for the drive strength configuration.
+ * @oe_bit: Offset in @ctl_reg for controlling output enable.
+ * @in_bit: Offset in @io_reg for the input bit value.
+ * @out_bit: Offset in @io_reg for the output bit value.
+ * @intr_enable_bit: Offset in @intr_cfg_reg for enabling the interrupt for this group.
+ * @intr_status_bit: Offset in @intr_status_reg for reading and acking the interrupt
+ * status.
+ * @intr_target_bit: Offset in @intr_target_reg for configuring the interrupt routing.
+ * @intr_raw_status_bit: Offset in @intr_cfg_reg for the raw status bit.
+ * @intr_polarity_bit: Offset in @intr_cfg_reg for specifying polarity of the interrupt.
+ * @intr_detection_bit: Offset in @intr_cfg_reg for specifying interrupt type.
+ * @intr_detection_width: Number of bits used for specifying interrupt type,
+ * Should be 2 for SoCs that can detect both edges in hardware,
+ * otherwise 1.
+ */
+struct msm_pingroup {
+ const char *name;
+ const unsigned *pins;
+ unsigned npins;
+
+ unsigned funcs[8];
+
+ s16 ctl_reg;
+ s16 io_reg;
+ s16 intr_cfg_reg;
+ s16 intr_status_reg;
+ s16 intr_target_reg;
+
+ unsigned mux_bit:5;
+
+ unsigned pull_bit:5;
+ unsigned drv_bit:5;
+
+ unsigned oe_bit:5;
+ unsigned in_bit:5;
+ unsigned out_bit:5;
+
+ unsigned intr_enable_bit:5;
+ unsigned intr_status_bit:5;
+
+ unsigned intr_target_bit:5;
+ unsigned intr_raw_status_bit:5;
+ unsigned intr_polarity_bit:5;
+ unsigned intr_detection_bit:5;
+ unsigned intr_detection_width:5;
+};
+
+/**
+ * struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration
+ * @pins: An array describing all pins the pin controller affects.
+ * @npins: The number of entries in @pins.
+ * @functions: An array describing all mux functions the SoC supports.
+ * @nfunctions: The number of entries in @functions.
+ * @groups: An array describing all pin groups the pin SoC supports.
+ * @ngroups: The numbmer of entries in @groups.
+ * @ngpio: The number of pingroups the driver should expose as GPIOs.
+ */
+struct msm_pinctrl_soc_data {
+ const struct pinctrl_pin_desc *pins;
+ unsigned npins;
+ const struct msm_function *functions;
+ unsigned nfunctions;
+ const struct msm_pingroup *groups;
+ unsigned ngroups;
+ unsigned ngpios;
+};
+
+int msm_pinctrl_probe(struct platform_device *pdev,
+ const struct msm_pinctrl_soc_data *soc_data);
+int msm_pinctrl_remove(struct platform_device *pdev);
+
+#endif
diff --git a/drivers/pinctrl/pinctrl-msm8x74.c b/drivers/pinctrl/pinctrl-msm8x74.c
new file mode 100644
index 0000000..762552b
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-msm8x74.c
@@ -0,0 +1,636 @@
+/*
+ * Copyright (c) 2013, Sony Mobile Communications AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "pinctrl-msm.h"
+
+static const struct pinctrl_pin_desc msm8x74_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+ PINCTRL_PIN(70, "GPIO_70"),
+ PINCTRL_PIN(71, "GPIO_71"),
+ PINCTRL_PIN(72, "GPIO_72"),
+ PINCTRL_PIN(73, "GPIO_73"),
+ PINCTRL_PIN(74, "GPIO_74"),
+ PINCTRL_PIN(75, "GPIO_75"),
+ PINCTRL_PIN(76, "GPIO_76"),
+ PINCTRL_PIN(77, "GPIO_77"),
+ PINCTRL_PIN(78, "GPIO_78"),
+ PINCTRL_PIN(79, "GPIO_79"),
+ PINCTRL_PIN(80, "GPIO_80"),
+ PINCTRL_PIN(81, "GPIO_81"),
+ PINCTRL_PIN(82, "GPIO_82"),
+ PINCTRL_PIN(83, "GPIO_83"),
+ PINCTRL_PIN(84, "GPIO_84"),
+ PINCTRL_PIN(85, "GPIO_85"),
+ PINCTRL_PIN(86, "GPIO_86"),
+ PINCTRL_PIN(87, "GPIO_87"),
+ PINCTRL_PIN(88, "GPIO_88"),
+ PINCTRL_PIN(89, "GPIO_89"),
+ PINCTRL_PIN(90, "GPIO_90"),
+ PINCTRL_PIN(91, "GPIO_91"),
+ PINCTRL_PIN(92, "GPIO_92"),
+ PINCTRL_PIN(93, "GPIO_93"),
+ PINCTRL_PIN(94, "GPIO_94"),
+ PINCTRL_PIN(95, "GPIO_95"),
+ PINCTRL_PIN(96, "GPIO_96"),
+ PINCTRL_PIN(97, "GPIO_97"),
+ PINCTRL_PIN(98, "GPIO_98"),
+ PINCTRL_PIN(99, "GPIO_99"),
+ PINCTRL_PIN(100, "GPIO_100"),
+ PINCTRL_PIN(101, "GPIO_101"),
+ PINCTRL_PIN(102, "GPIO_102"),
+ PINCTRL_PIN(103, "GPIO_103"),
+ PINCTRL_PIN(104, "GPIO_104"),
+ PINCTRL_PIN(105, "GPIO_105"),
+ PINCTRL_PIN(106, "GPIO_106"),
+ PINCTRL_PIN(107, "GPIO_107"),
+ PINCTRL_PIN(108, "GPIO_108"),
+ PINCTRL_PIN(109, "GPIO_109"),
+ PINCTRL_PIN(110, "GPIO_110"),
+ PINCTRL_PIN(111, "GPIO_111"),
+ PINCTRL_PIN(112, "GPIO_112"),
+ PINCTRL_PIN(113, "GPIO_113"),
+ PINCTRL_PIN(114, "GPIO_114"),
+ PINCTRL_PIN(115, "GPIO_115"),
+ PINCTRL_PIN(116, "GPIO_116"),
+ PINCTRL_PIN(117, "GPIO_117"),
+ PINCTRL_PIN(118, "GPIO_118"),
+ PINCTRL_PIN(119, "GPIO_119"),
+ PINCTRL_PIN(120, "GPIO_120"),
+ PINCTRL_PIN(121, "GPIO_121"),
+ PINCTRL_PIN(122, "GPIO_122"),
+ PINCTRL_PIN(123, "GPIO_123"),
+ PINCTRL_PIN(124, "GPIO_124"),
+ PINCTRL_PIN(125, "GPIO_125"),
+ PINCTRL_PIN(126, "GPIO_126"),
+ PINCTRL_PIN(127, "GPIO_127"),
+ PINCTRL_PIN(128, "GPIO_128"),
+ PINCTRL_PIN(129, "GPIO_129"),
+ PINCTRL_PIN(130, "GPIO_130"),
+ PINCTRL_PIN(131, "GPIO_131"),
+ PINCTRL_PIN(132, "GPIO_132"),
+ PINCTRL_PIN(133, "GPIO_133"),
+ PINCTRL_PIN(134, "GPIO_134"),
+ PINCTRL_PIN(135, "GPIO_135"),
+ PINCTRL_PIN(136, "GPIO_136"),
+ PINCTRL_PIN(137, "GPIO_137"),
+ PINCTRL_PIN(138, "GPIO_138"),
+ PINCTRL_PIN(139, "GPIO_139"),
+ PINCTRL_PIN(140, "GPIO_140"),
+ PINCTRL_PIN(141, "GPIO_141"),
+ PINCTRL_PIN(142, "GPIO_142"),
+ PINCTRL_PIN(143, "GPIO_143"),
+ PINCTRL_PIN(144, "GPIO_144"),
+ PINCTRL_PIN(145, "GPIO_145"),
+
+ PINCTRL_PIN(146, "SDC1_CLK"),
+ PINCTRL_PIN(147, "SDC1_CMD"),
+ PINCTRL_PIN(148, "SDC1_DATA"),
+ PINCTRL_PIN(149, "SDC2_CLK"),
+ PINCTRL_PIN(150, "SDC2_CMD"),
+ PINCTRL_PIN(151, "SDC2_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+
+static const unsigned int sdc1_clk_pins[] = { 146 };
+static const unsigned int sdc1_cmd_pins[] = { 147 };
+static const unsigned int sdc1_data_pins[] = { 148 };
+static const unsigned int sdc2_clk_pins[] = { 149 };
+static const unsigned int sdc2_cmd_pins[] = { 150 };
+static const unsigned int sdc2_data_pins[] = { 151 };
+
+#define FUNCTION(fname) \
+ [MSM_MUX_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = { \
+ MSM_MUX_NA, /* gpio mode */ \
+ MSM_MUX_##f1, \
+ MSM_MUX_##f2, \
+ MSM_MUX_##f3, \
+ MSM_MUX_##f4, \
+ MSM_MUX_##f5, \
+ MSM_MUX_##f6, \
+ MSM_MUX_##f7 \
+ }, \
+ .ctl_reg = 0x1000 + 0x10 * id , \
+ .io_reg = 0x1004 + 0x10 * id, \
+ .intr_cfg_reg = 0x1008 + 0x10 * id, \
+ .intr_status_reg = 0x100c + 0x10 * id, \
+ .intr_target_reg = 0x1008 + 0x10 * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+/*
+ * TODO: Add the rest of the possible functions and fill out
+ * the pingroup table below.
+ */
+enum msm8x74_functions {
+ MSM_MUX_blsp_i2c2,
+ MSM_MUX_blsp_i2c6,
+ MSM_MUX_blsp_i2c11,
+ MSM_MUX_blsp_spi1,
+ MSM_MUX_blsp_uart2,
+ MSM_MUX_blsp_uart8,
+ MSM_MUX_slimbus,
+ MSM_MUX_NA,
+};
+
+static const char * const blsp_i2c2_groups[] = { "gpio6", "gpio7" };
+static const char * const blsp_i2c6_groups[] = { "gpio29", "gpio30" };
+static const char * const blsp_i2c11_groups[] = { "gpio83", "gpio84" };
+static const char * const blsp_spi1_groups[] = { "gpio0", "gpio1", "gpio2", "gpio3" };
+static const char * const blsp_uart2_groups[] = { "gpio4", "gpio5" };
+static const char * const blsp_uart8_groups[] = { "gpio45", "gpio46" };
+static const char * const slimbus_groups[] = { "gpio70", "gpio71" };
+
+static const struct msm_function msm8x74_functions[] = {
+ FUNCTION(blsp_i2c2),
+ FUNCTION(blsp_i2c6),
+ FUNCTION(blsp_i2c11),
+ FUNCTION(blsp_spi1),
+ FUNCTION(blsp_uart2),
+ FUNCTION(blsp_uart8),
+ FUNCTION(slimbus),
+};
+
+static const struct msm_pingroup msm8x74_groups[] = {
+ PINGROUP(0, blsp_spi1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(1, blsp_spi1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(2, blsp_spi1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(3, blsp_spi1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(4, NA, blsp_uart2, NA, NA, NA, NA, NA),
+ PINGROUP(5, NA, blsp_uart2, NA, NA, NA, NA, NA),
+ PINGROUP(6, NA, NA, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(7, NA, NA, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(8, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(9, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(10, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(11, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(12, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(13, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(14, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(15, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(16, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(17, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(18, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(19, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(20, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(21, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(22, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(23, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(24, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(25, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(26, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(27, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(28, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(29, NA, NA, blsp_i2c6, NA, NA, NA, NA),
+ PINGROUP(30, NA, NA, blsp_i2c6, NA, NA, NA, NA),
+ PINGROUP(31, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(32, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(33, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(34, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(35, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(36, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(37, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(38, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(39, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(40, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(41, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(42, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(43, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(44, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(45, NA, blsp_uart8, NA, NA, NA, NA, NA),
+ PINGROUP(46, NA, blsp_uart8, NA, NA, NA, NA, NA),
+ PINGROUP(47, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(48, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(49, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(50, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(51, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(52, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(53, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(54, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(55, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(56, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(57, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(58, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(59, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(60, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(61, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(62, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(63, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(64, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(65, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(66, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(67, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(68, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(69, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(70, slimbus, NA, NA, NA, NA, NA, NA),
+ PINGROUP(71, slimbus, NA, NA, NA, NA, NA, NA),
+ PINGROUP(72, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(73, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(74, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(75, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(76, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(77, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(78, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(79, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(80, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(81, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(82, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(83, NA, NA, blsp_i2c11, NA, NA, NA, NA),
+ PINGROUP(84, NA, NA, blsp_i2c11, NA, NA, NA, NA),
+ PINGROUP(85, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(86, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(87, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(88, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(89, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(90, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(91, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(92, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(93, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(94, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(95, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(96, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(97, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(98, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(99, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(100, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(101, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(102, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(103, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(104, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(105, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(106, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(107, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(108, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(109, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(110, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(111, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(112, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(113, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(114, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(115, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(116, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(117, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(118, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(119, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(120, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(121, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(122, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(123, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(124, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(125, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(126, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(127, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(128, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(129, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(130, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(131, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(132, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(133, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(134, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(135, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(136, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(137, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(138, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(139, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(140, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(141, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(143, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(143, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(144, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(145, NA, NA, NA, NA, NA, NA, NA),
+ SDC_PINGROUP(sdc1_clk, 0x2044, 13, 6),
+ SDC_PINGROUP(sdc1_cmd, 0x2044, 11, 3),
+ SDC_PINGROUP(sdc1_data, 0x2044, 9, 0),
+ SDC_PINGROUP(sdc2_clk, 0x2048, 14, 6),
+ SDC_PINGROUP(sdc2_cmd, 0x2048, 11, 3),
+ SDC_PINGROUP(sdc2_data, 0x2048, 9, 0),
+};
+
+#define NUM_GPIO_PINGROUPS 146
+
+static const struct msm_pinctrl_soc_data msm8x74_pinctrl = {
+ .pins = msm8x74_pins,
+ .npins = ARRAY_SIZE(msm8x74_pins),
+ .functions = msm8x74_functions,
+ .nfunctions = ARRAY_SIZE(msm8x74_functions),
+ .groups = msm8x74_groups,
+ .ngroups = ARRAY_SIZE(msm8x74_groups),
+ .ngpios = NUM_GPIO_PINGROUPS,
+};
+
+static int msm8x74_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &msm8x74_pinctrl);
+}
+
+static struct of_device_id msm8x74_pinctrl_of_match[] = {
+ { .compatible = "qcom,msm8x74-pinctrl", },
+ { },
+};
+
+static struct platform_driver msm8x74_pinctrl_driver = {
+ .driver = {
+ .name = "msm8x74-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = msm8x74_pinctrl_of_match,
+ },
+ .probe = msm8x74_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init msm8x74_pinctrl_init(void)
+{
+ return platform_driver_register(&msm8x74_pinctrl_driver);
+}
+arch_initcall(msm8x74_pinctrl_init);
+
+static void __exit msm8x74_pinctrl_exit(void)
+{
+ platform_driver_unregister(&msm8x74_pinctrl_driver);
+}
+module_exit(msm8x74_pinctrl_exit);
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
+MODULE_DESCRIPTION("Qualcomm MSM8x74 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, msm8x74_pinctrl_of_match);
+
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 7111c3b..6559e14 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -4,7 +4,7 @@
* Copyright (C) 2008,2009 STMicroelectronics
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2011-2013 Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -33,7 +33,6 @@
#include <linux/pinctrl/pinconf.h>
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
#include "pinctrl-nomadik.h"
#include "core.h"
@@ -45,6 +44,221 @@
* Symbols in this file are called "nmk_gpio" for "nomadik gpio"
*/
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ * bit 0.. 8 - Pin Number (512 Pins Maximum)
+ * bit 9..10 - Alternate Function Selection
+ * bit 11..12 - Pull up/down state
+ * bit 13 - Sleep mode behaviour
+ * bit 14 - Direction
+ * bit 15 - Value (if output)
+ * bit 16..18 - SLPM pull up/down state
+ * bit 19..20 - SLPM direction
+ * bit 21..22 - SLPM Value (if output)
+ * bit 23..25 - PDIS value (if input)
+ * bit 26 - Gpio mode
+ * bit 27 - Sleep mode
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ * pull up/down = disabled
+ * sleep mode = input/wakeup
+ * direction = input
+ * value = low
+ * SLPM direction = same as normal
+ * SLPM pull = same as normal
+ * SLPM value = same as normal
+ *
+ * PIN_CFG - default config with alternate function
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK 0x1ff
+#define PIN_NUM(x) ((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT 9
+#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT 11
+#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT 13
+#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
+
+#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
+#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
+
+#define PIN_DIR_SHIFT 14
+#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT 15
+#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
+
+#define PIN_SLPM_PULL_SHIFT 16
+#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x) \
+ (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE \
+ ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP \
+ ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN \
+ ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT 19
+#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x) \
+ (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT 21
+#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x) \
+ (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+#define PIN_SLPM_PDIS_SHIFT 23
+#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS(x) \
+ (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT)
+
+#define PIN_LOWEMI_SHIFT 25
+#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT)
+
+#define PIN_GPIOMODE_SHIFT 26
+#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT 27
+#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT)
+
+
+/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
+#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
+#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
+
+#define PIN_CFG_DEFAULT (0)
+
+#define PIN_CFG(num, alt) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_INPUT(num, alt, pull) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+#define GPIO_BLOCK_SHIFT 5
+#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT 0x00
+#define NMK_GPIO_DATS 0x04
+#define NMK_GPIO_DATC 0x08
+#define NMK_GPIO_PDIS 0x0c
+#define NMK_GPIO_DIR 0x10
+#define NMK_GPIO_DIRS 0x14
+#define NMK_GPIO_DIRC 0x18
+#define NMK_GPIO_SLPC 0x1c
+#define NMK_GPIO_AFSLA 0x20
+#define NMK_GPIO_AFSLB 0x24
+#define NMK_GPIO_LOWEMI 0x28
+
+#define NMK_GPIO_RIMSC 0x40
+#define NMK_GPIO_FIMSC 0x44
+#define NMK_GPIO_IS 0x48
+#define NMK_GPIO_IC 0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS 0x58
+/* These appear in DB8540 and later ASICs */
+#define NMK_GPIO_EDGELEVEL 0x5C
+#define NMK_GPIO_LEVEL 0x60
+
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+ NMK_GPIO_PULL_NONE,
+ NMK_GPIO_PULL_UP,
+ NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+ NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_NOCHANGE,
+ NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+ char *name;
+ int first_gpio;
+ int first_irq;
+ int num_gpio;
+ u32 (*get_secondary_status)(unsigned int bank);
+ void (*set_ioforce)(bool enable);
+ bool supports_sleepmode;
+};
+
struct nmk_gpio_chip {
struct gpio_chip chip;
struct irq_domain *domain;
@@ -846,14 +1060,14 @@
(mode < 0) ? "unknown" : modes[mode],
pull ? "pull" : "none");
- if (label && !is_out) {
- int irq = gpio_to_irq(gpio);
+ if (!is_out) {
+ int irq = gpio_to_irq(gpio);
struct irq_desc *desc = irq_to_desc(irq);
/* This races with request_irq(), set_irq_type(),
* and set_irq_wake() ... but those are "rare".
*/
- if (irq >= 0 && desc->action) {
+ if (irq > 0 && desc && desc->action) {
char *trigger;
u32 bitmask = nmk_gpio_get_bitmask(gpio);
@@ -1026,7 +1240,7 @@
static int nmk_gpio_probe(struct platform_device *dev)
{
- struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
+ struct nmk_gpio_platform_data *pdata;
struct device_node *np = dev->dev.of_node;
struct nmk_gpio_chip *nmk_chip;
struct gpio_chip *chip;
@@ -1034,31 +1248,23 @@
struct clk *clk;
int secondary_irq;
void __iomem *base;
- int irq_start = 0;
int irq;
int ret;
- if (!pdata && !np) {
- dev_err(&dev->dev, "No platform data or device tree found\n");
- return -ENODEV;
+ pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "st,supports-sleepmode", NULL))
+ pdata->supports_sleepmode = true;
+
+ if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
+ dev_err(&dev->dev, "gpio-bank property not found\n");
+ return -EINVAL;
}
- if (np) {
- pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- if (of_get_property(np, "st,supports-sleepmode", NULL))
- pdata->supports_sleepmode = true;
-
- if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
- dev_err(&dev->dev, "gpio-bank property not found\n");
- return -EINVAL;
- }
-
- pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
- pdata->num_gpio = NMK_GPIO_PER_CHIP;
- }
+ pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
+ pdata->num_gpio = NMK_GPIO_PER_CHIP;
irq = platform_get_irq(dev, 0);
if (irq < 0)
@@ -1107,10 +1313,7 @@
clk_enable(nmk_chip->clk);
nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
clk_disable(nmk_chip->clk);
-
-#ifdef CONFIG_OF_GPIO
chip->of_node = np;
-#endif
ret = gpiochip_add(&nmk_chip->chip);
if (ret)
@@ -1122,10 +1325,8 @@
platform_set_drvdata(dev, nmk_chip);
- if (!np)
- irq_start = pdata->first_irq;
nmk_chip->domain = irq_domain_add_simple(np,
- NMK_GPIO_PER_CHIP, irq_start,
+ NMK_GPIO_PER_CHIP, 0,
&nmk_gpio_irq_simple_ops, nmk_chip);
if (!nmk_chip->domain) {
dev_err(&dev->dev, "failed to create irqdomain\n");
@@ -1858,11 +2059,10 @@
static int nmk_pinctrl_probe(struct platform_device *pdev)
{
- const struct platform_device_id *platid = platform_get_device_id(pdev);
+ const struct of_device_id *match;
struct device_node *np = pdev->dev.of_node;
struct device_node *prcm_np;
struct nmk_pinctrl *npct;
- struct resource *res;
unsigned int version = 0;
int i;
@@ -1870,16 +2070,10 @@
if (!npct)
return -ENOMEM;
- if (platid)
- version = platid->driver_data;
- else if (np) {
- const struct of_device_id *match;
-
- match = of_match_device(nmk_pinctrl_match, &pdev->dev);
- if (!match)
- return -ENODEV;
- version = (unsigned int) match->data;
- }
+ match = of_match_device(nmk_pinctrl_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+ version = (unsigned int) match->data;
/* Poke in other ASIC variants here */
if (version == PINCTRL_NMK_STN8815)
@@ -1889,17 +2083,9 @@
if (version == PINCTRL_NMK_DB8540)
nmk_pinctrl_db8540_init(&npct->soc);
- if (np) {
- prcm_np = of_parse_phandle(np, "prcm", 0);
- if (prcm_np)
- npct->prcm_base = of_iomap(prcm_np, 0);
- }
-
- /* Allow platform passed information to over-write DT. */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res)
- npct->prcm_base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
+ prcm_np = of_parse_phandle(np, "prcm", 0);
+ if (prcm_np)
+ npct->prcm_base = of_iomap(prcm_np, 0);
if (!npct->prcm_base) {
if (version == PINCTRL_NMK_STN8815) {
dev_info(&pdev->dev,
@@ -1958,13 +2144,6 @@
.probe = nmk_gpio_probe,
};
-static const struct platform_device_id nmk_pinctrl_id[] = {
- { "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
- { "pinctrl-db8500", PINCTRL_NMK_DB8500 },
- { "pinctrl-db8540", PINCTRL_NMK_DB8540 },
- { }
-};
-
static struct platform_driver nmk_pinctrl_driver = {
.driver = {
.owner = THIS_MODULE,
@@ -1972,7 +2151,6 @@
.of_match_table = nmk_pinctrl_match,
},
.probe = nmk_pinctrl_probe,
- .id_table = nmk_pinctrl_id,
#ifdef CONFIG_PM
.suspend = nmk_pinctrl_suspend,
.resume = nmk_pinctrl_resume,
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
index bcd4191..d8215f1 100644
--- a/drivers/pinctrl/pinctrl-nomadik.h
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -1,13 +1,23 @@
#ifndef PINCTRL_PINCTRL_NOMADIK_H
#define PINCTRL_PINCTRL_NOMADIK_H
-#include <linux/platform_data/pinctrl-nomadik.h>
-
/* Package definitions */
#define PINCTRL_NMK_STN8815 0
#define PINCTRL_NMK_DB8500 1
#define PINCTRL_NMK_DB8540 2
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO 0
+#define NMK_GPIO_ALT_A 1
+#define NMK_GPIO_ALT_B 2
+#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+#define NMK_GPIO_ALT_CX_SHIFT 2
+#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+
#define PRCM_GPIOCR_ALTCX(pin_num,\
altc1_used, altc1_ri, altc1_cb,\
altc2_used, altc2_ri, altc2_cb,\
diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
index d77ece5..b9b464d 100644
--- a/drivers/pinctrl/sh-pfc/core.c
+++ b/drivers/pinctrl/sh-pfc/core.c
@@ -26,29 +26,67 @@
#include "core.h"
-static int sh_pfc_ioremap(struct sh_pfc *pfc, struct platform_device *pdev)
+static int sh_pfc_map_resources(struct sh_pfc *pfc,
+ struct platform_device *pdev)
{
+ unsigned int num_windows = 0;
+ unsigned int num_irqs = 0;
+ struct sh_pfc_window *windows;
+ unsigned int *irqs = NULL;
struct resource *res;
- int k;
+ unsigned int i;
- if (pdev->num_resources == 0)
+ /* Count the MEM and IRQ resources. */
+ for (i = 0; i < pdev->num_resources; ++i) {
+ switch (resource_type(&pdev->resource[i])) {
+ case IORESOURCE_MEM:
+ num_windows++;
+ break;
+
+ case IORESOURCE_IRQ:
+ num_irqs++;
+ break;
+ }
+ }
+
+ if (num_windows == 0)
return -EINVAL;
- pfc->window = devm_kzalloc(pfc->dev, pdev->num_resources *
- sizeof(*pfc->window), GFP_NOWAIT);
- if (!pfc->window)
+ /* Allocate memory windows and IRQs arrays. */
+ windows = devm_kzalloc(pfc->dev, num_windows * sizeof(*windows),
+ GFP_KERNEL);
+ if (windows == NULL)
return -ENOMEM;
- pfc->num_windows = pdev->num_resources;
+ pfc->num_windows = num_windows;
+ pfc->windows = windows;
- for (k = 0, res = pdev->resource; k < pdev->num_resources; k++, res++) {
- WARN_ON(resource_type(res) != IORESOURCE_MEM);
- pfc->window[k].phys = res->start;
- pfc->window[k].size = resource_size(res);
- pfc->window[k].virt = devm_ioremap_nocache(pfc->dev, res->start,
- resource_size(res));
- if (!pfc->window[k].virt)
+ if (num_irqs) {
+ irqs = devm_kzalloc(pfc->dev, num_irqs * sizeof(*irqs),
+ GFP_KERNEL);
+ if (irqs == NULL)
return -ENOMEM;
+
+ pfc->num_irqs = num_irqs;
+ pfc->irqs = irqs;
+ }
+
+ /* Fill them. */
+ for (i = 0, res = pdev->resource; i < pdev->num_resources; i++, res++) {
+ switch (resource_type(res)) {
+ case IORESOURCE_MEM:
+ windows->phys = res->start;
+ windows->size = resource_size(res);
+ windows->virt = devm_ioremap_resource(pfc->dev, res);
+ if (IS_ERR(windows->virt))
+ return -ENOMEM;
+ windows++;
+ break;
+
+ case IORESOURCE_IRQ:
+ *irqs++ = res->start;
+ break;
+ }
}
return 0;
@@ -62,7 +100,7 @@
/* scan through physical windows and convert address */
for (i = 0; i < pfc->num_windows; i++) {
- window = pfc->window + i;
+ window = pfc->windows + i;
if (address < window->phys)
continue;
@@ -147,7 +185,7 @@
unsigned long *maskp,
unsigned long *posp)
{
- int k;
+ unsigned int k;
*mapped_regp = sh_pfc_phys_to_virt(pfc, crp->reg);
@@ -196,7 +234,7 @@
{
const struct pinmux_cfg_reg *config_reg;
unsigned long r_width, f_width, curr_width, ncomb;
- int k, m, n, pos, bit_pos;
+ unsigned int k, m, n, pos, bit_pos;
k = 0;
while (1) {
@@ -238,7 +276,7 @@
u16 *enum_idp)
{
const u16 *data = pfc->info->gpio_data;
- int k;
+ unsigned int k;
if (pos) {
*enum_idp = data[pos + 1];
@@ -481,7 +519,7 @@
pfc->info = info;
pfc->dev = &pdev->dev;
- ret = sh_pfc_ioremap(pfc, pdev);
+ ret = sh_pfc_map_resources(pfc, pdev);
if (unlikely(ret < 0))
return ret;
diff --git a/drivers/pinctrl/sh-pfc/core.h b/drivers/pinctrl/sh-pfc/core.h
index 11ea872..b7b0e6c 100644
--- a/drivers/pinctrl/sh-pfc/core.h
+++ b/drivers/pinctrl/sh-pfc/core.h
@@ -37,7 +37,9 @@
spinlock_t lock;
unsigned int num_windows;
- struct sh_pfc_window *window;
+ struct sh_pfc_window *windows;
+ unsigned int num_irqs;
+ unsigned int *irqs;
struct sh_pfc_pin_range *ranges;
unsigned int nr_ranges;
diff --git a/drivers/pinctrl/sh-pfc/gpio.c b/drivers/pinctrl/sh-pfc/gpio.c
index 04bf52b..6348081 100644
--- a/drivers/pinctrl/sh-pfc/gpio.c
+++ b/drivers/pinctrl/sh-pfc/gpio.c
@@ -204,18 +204,24 @@
static int gpio_pin_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct sh_pfc *pfc = gpio_to_pfc(gc);
- int i, k;
+ unsigned int i, k;
for (i = 0; i < pfc->info->gpio_irq_size; i++) {
- unsigned short *gpios = pfc->info->gpio_irq[i].gpios;
+ short *gpios = pfc->info->gpio_irq[i].gpios;
- for (k = 0; gpios[k]; k++) {
+ for (k = 0; gpios[k] >= 0; k++) {
if (gpios[k] == offset)
- return pfc->info->gpio_irq[i].irq;
+ goto found;
}
}
return -ENOSYS;
+
+found:
+ if (pfc->num_irqs)
+ return pfc->irqs[i];
+ else
+ return pfc->info->gpio_irq[i].irq;
}
static int gpio_pin_setup(struct sh_pfc_chip *chip)
@@ -347,7 +353,7 @@
* GPIOs.
*/
for (i = 0; i < pfc->num_windows; ++i) {
- struct sh_pfc_window *window = &pfc->window[i];
+ struct sh_pfc_window *window = &pfc->windows[i];
if (pfc->info->data_regs[0].reg >= window->phys &&
pfc->info->data_regs[0].reg < window->phys + window->size)
@@ -357,8 +363,14 @@
if (i == pfc->num_windows)
return 0;
+ /* If we have IRQ resources make sure their number is correct. */
+ if (pfc->num_irqs && pfc->num_irqs != pfc->info->gpio_irq_size) {
+ dev_err(pfc->dev, "invalid number of IRQ resources\n");
+ return -EINVAL;
+ }
+
/* Register the real GPIOs chip. */
- chip = sh_pfc_add_gpiochip(pfc, gpio_pin_setup, &pfc->window[i]);
+ chip = sh_pfc_add_gpiochip(pfc, gpio_pin_setup, &pfc->windows[i]);
if (IS_ERR(chip))
return PTR_ERR(chip);
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
index d25fd4e..32dd478 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a73a4.c
@@ -2061,17 +2061,6 @@
SH_PFC_FUNCTION(sdhi2),
};
-#undef PORTCR
-#define PORTCR(nr, reg) \
- { \
- PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, \
- PORT##nr##_FN2, PORT##nr##_FN3, \
- PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static const struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000),
PORTCR(1, 0xe6050001),
@@ -2691,7 +2680,7 @@
{
void __iomem *addr;
- addr = pfc->window->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
+ addr = pfc->windows->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
switch (ioread8(addr) & PORTCR_PULMD_MASK) {
case PORTCR_PULMD_UP:
@@ -2710,7 +2699,7 @@
void __iomem *addr;
u32 value;
- addr = pfc->window->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
+ addr = pfc->windows->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
value = ioread8(addr) & ~PORTCR_PULMD_MASK;
switch (bias) {
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
index bc5eb45..61e2585 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7740.c
@@ -3234,17 +3234,6 @@
SH_PFC_FUNCTION(tpu0),
};
-#undef PORTCR
-#define PORTCR(nr, reg) \
- { \
- PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, \
- PORT##nr##_FN2, PORT##nr##_FN3, \
- PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static const struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
@@ -3721,7 +3710,7 @@
&r8a7740_portcr_offsets[i];
if (pin <= group->end_pin)
- return pfc->window->virt + group->offset + pin;
+ return pfc->windows->virt + group->offset + pin;
}
return NULL;
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
index 72786fc..293a51a 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
@@ -1739,6 +1739,56 @@
SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),
};
+/* - AUDIO CLOCK ------------------------------------------------------------ */
+static const unsigned int audio_clk_a_pins[] = {
+ /* CLK A */
+ RCAR_GP_PIN(4, 25),
+};
+static const unsigned int audio_clk_a_mux[] = {
+ AUDIO_CLKA_MARK,
+};
+static const unsigned int audio_clk_b_pins[] = {
+ /* CLK B */
+ RCAR_GP_PIN(4, 26),
+};
+static const unsigned int audio_clk_b_mux[] = {
+ AUDIO_CLKB_MARK,
+};
+static const unsigned int audio_clk_c_pins[] = {
+ /* CLK C */
+ RCAR_GP_PIN(5, 27),
+};
+static const unsigned int audio_clk_c_mux[] = {
+ AUDIO_CLKC_MARK,
+};
+static const unsigned int audio_clkout_pins[] = {
+ /* CLK OUT */
+ RCAR_GP_PIN(5, 16),
+};
+static const unsigned int audio_clkout_mux[] = {
+ AUDIO_CLKOUT_MARK,
+};
+static const unsigned int audio_clkout_b_pins[] = {
+ /* CLK OUT B */
+ RCAR_GP_PIN(0, 23),
+};
+static const unsigned int audio_clkout_b_mux[] = {
+ AUDIO_CLKOUT_B_MARK,
+};
+static const unsigned int audio_clkout_c_pins[] = {
+ /* CLK OUT C */
+ RCAR_GP_PIN(5, 27),
+};
+static const unsigned int audio_clkout_c_mux[] = {
+ AUDIO_CLKOUT_C_MARK,
+};
+static const unsigned int audio_clkout_d_pins[] = {
+ /* CLK OUT D */
+ RCAR_GP_PIN(5, 20),
+};
+static const unsigned int audio_clkout_d_mux[] = {
+ AUDIO_CLKOUT_D_MARK,
+};
/* - DU RGB ----------------------------------------------------------------- */
static const unsigned int du_rgb666_pins[] = {
/* R[7:2], G[7:2], B[7:2] */
@@ -2961,6 +3011,189 @@
static const unsigned int sdhi3_wp_mux[] = {
SD3_WP_MARK,
};
+/* - SSI -------------------------------------------------------------------- */
+static const unsigned int ssi0_data_pins[] = {
+ /* SDATA0 */
+ RCAR_GP_PIN(4, 5),
+};
+static const unsigned int ssi0_data_mux[] = {
+ SSI_SDATA0_MARK,
+};
+static const unsigned int ssi0129_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(4, 3), RCAR_GP_PIN(4, 4),
+};
+static const unsigned int ssi0129_ctrl_mux[] = {
+ SSI_SCK0129_MARK, SSI_WS0129_MARK,
+};
+static const unsigned int ssi1_data_pins[] = {
+ /* SDATA1 */
+ RCAR_GP_PIN(4, 6),
+};
+static const unsigned int ssi1_data_mux[] = {
+ SSI_SDATA1_MARK,
+};
+static const unsigned int ssi1_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(4, 7), RCAR_GP_PIN(4, 24),
+};
+static const unsigned int ssi1_ctrl_mux[] = {
+ SSI_SCK1_MARK, SSI_WS1_MARK,
+};
+static const unsigned int ssi2_data_pins[] = {
+ /* SDATA2 */
+ RCAR_GP_PIN(4, 7),
+};
+static const unsigned int ssi2_data_mux[] = {
+ SSI_SDATA2_MARK,
+};
+static const unsigned int ssi2_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(5, 13), RCAR_GP_PIN(5, 17),
+};
+static const unsigned int ssi2_ctrl_mux[] = {
+ SSI_SCK2_MARK, SSI_WS2_MARK,
+};
+static const unsigned int ssi3_data_pins[] = {
+ /* SDATA3 */
+ RCAR_GP_PIN(4, 10),
+};
+static const unsigned int ssi3_data_mux[] = {
+ SSI_SDATA3_MARK
+};
+static const unsigned int ssi34_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(4, 8), RCAR_GP_PIN(4, 9),
+};
+static const unsigned int ssi34_ctrl_mux[] = {
+ SSI_SCK34_MARK, SSI_WS34_MARK,
+};
+static const unsigned int ssi4_data_pins[] = {
+ /* SDATA4 */
+ RCAR_GP_PIN(4, 13),
+};
+static const unsigned int ssi4_data_mux[] = {
+ SSI_SDATA4_MARK,
+};
+static const unsigned int ssi4_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(4, 11), RCAR_GP_PIN(4, 12),
+};
+static const unsigned int ssi4_ctrl_mux[] = {
+ SSI_SCK4_MARK, SSI_WS4_MARK,
+};
+static const unsigned int ssi5_pins[] = {
+ /* SDATA5, SCK, WS */
+ RCAR_GP_PIN(4, 16), RCAR_GP_PIN(4, 14), RCAR_GP_PIN(4, 15),
+};
+static const unsigned int ssi5_mux[] = {
+ SSI_SDATA5_MARK, SSI_SCK5_MARK, SSI_WS5_MARK,
+};
+static const unsigned int ssi5_b_pins[] = {
+ /* SDATA5, SCK, WS */
+ RCAR_GP_PIN(0, 26), RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 25),
+};
+static const unsigned int ssi5_b_mux[] = {
+ SSI_SDATA5_B_MARK, SSI_SCK5_B_MARK, SSI_WS5_B_MARK
+};
+static const unsigned int ssi5_c_pins[] = {
+ /* SDATA5, SCK, WS */
+ RCAR_GP_PIN(4, 24), RCAR_GP_PIN(4, 11), RCAR_GP_PIN(4, 12),
+};
+static const unsigned int ssi5_c_mux[] = {
+ SSI_SDATA5_C_MARK, SSI_SCK5_C_MARK, SSI_WS5_C_MARK,
+};
+static const unsigned int ssi6_pins[] = {
+ /* SDATA6, SCK, WS */
+ RCAR_GP_PIN(4, 19), RCAR_GP_PIN(4, 17), RCAR_GP_PIN(4, 18),
+};
+static const unsigned int ssi6_mux[] = {
+ SSI_SDATA6_MARK, SSI_SCK6_MARK, SSI_WS6_MARK,
+};
+static const unsigned int ssi6_b_pins[] = {
+ /* SDATA6, SCK, WS */
+ RCAR_GP_PIN(1, 29), RCAR_GP_PIN(1, 25), RCAR_GP_PIN(1, 27),
+};
+static const unsigned int ssi6_b_mux[] = {
+ SSI_SDATA6_B_MARK, SSI_SCK6_B_MARK, SSI_WS6_B_MARK,
+};
+static const unsigned int ssi7_data_pins[] = {
+ /* SDATA7 */
+ RCAR_GP_PIN(4, 22),
+};
+static const unsigned int ssi7_data_mux[] = {
+ SSI_SDATA7_MARK,
+};
+static const unsigned int ssi7_b_data_pins[] = {
+ /* SDATA7 */
+ RCAR_GP_PIN(4, 22),
+};
+static const unsigned int ssi7_b_data_mux[] = {
+ SSI_SDATA7_B_MARK,
+};
+static const unsigned int ssi7_c_data_pins[] = {
+ /* SDATA7 */
+ RCAR_GP_PIN(1, 26),
+};
+static const unsigned int ssi7_c_data_mux[] = {
+ SSI_SDATA7_C_MARK,
+};
+static const unsigned int ssi78_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(4, 20), RCAR_GP_PIN(4, 21),
+};
+static const unsigned int ssi78_ctrl_mux[] = {
+ SSI_SCK78_MARK, SSI_WS78_MARK,
+};
+static const unsigned int ssi78_b_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(1, 26), RCAR_GP_PIN(1, 24),
+};
+static const unsigned int ssi78_b_ctrl_mux[] = {
+ SSI_SCK78_B_MARK, SSI_WS78_B_MARK,
+};
+static const unsigned int ssi78_c_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(1, 24), RCAR_GP_PIN(1, 25),
+};
+static const unsigned int ssi78_c_ctrl_mux[] = {
+ SSI_SCK78_C_MARK, SSI_WS78_C_MARK,
+};
+static const unsigned int ssi8_data_pins[] = {
+ /* SDATA8 */
+ RCAR_GP_PIN(4, 23),
+};
+static const unsigned int ssi8_data_mux[] = {
+ SSI_SDATA8_MARK,
+};
+static const unsigned int ssi8_b_data_pins[] = {
+ /* SDATA8 */
+ RCAR_GP_PIN(4, 23),
+};
+static const unsigned int ssi8_b_data_mux[] = {
+ SSI_SDATA8_B_MARK,
+};
+static const unsigned int ssi8_c_data_pins[] = {
+ /* SDATA8 */
+ RCAR_GP_PIN(1, 27),
+};
+static const unsigned int ssi8_c_data_mux[] = {
+ SSI_SDATA8_C_MARK,
+};
+static const unsigned int ssi9_data_pins[] = {
+ /* SDATA9 */
+ RCAR_GP_PIN(4, 24),
+};
+static const unsigned int ssi9_data_mux[] = {
+ SSI_SDATA9_MARK,
+};
+static const unsigned int ssi9_ctrl_pins[] = {
+ /* SCK, WS */
+ RCAR_GP_PIN(5, 10), RCAR_GP_PIN(5, 11),
+};
+static const unsigned int ssi9_ctrl_mux[] = {
+ SSI_SCK9_MARK, SSI_WS9_MARK,
+};
/* - TPU0 ------------------------------------------------------------------- */
static const unsigned int tpu0_to0_pins[] = {
/* TO */
@@ -3014,59 +3247,110 @@
static const unsigned int usb2_mux[] = {
USB2_PWEN_MARK, USB2_OVC_MARK,
};
+
+union vin_data {
+ unsigned int data24[24];
+ unsigned int data20[20];
+ unsigned int data16[16];
+ unsigned int data12[12];
+ unsigned int data10[10];
+ unsigned int data8[8];
+ unsigned int data4[4];
+};
+
+#define VIN_DATA_PIN_GROUP(n, s) \
+ { \
+ .name = #n#s, \
+ .pins = n##_pins.data##s, \
+ .mux = n##_mux.data##s, \
+ .nr_pins = ARRAY_SIZE(n##_pins.data##s), \
+ }
+
/* - VIN0 ------------------------------------------------------------------- */
-static const unsigned int vin0_data_g_pins[] = {
- RCAR_GP_PIN(0, 8), RCAR_GP_PIN(0, 9), RCAR_GP_PIN(0, 10),
- RCAR_GP_PIN(0, 11), RCAR_GP_PIN(0, 0), RCAR_GP_PIN(0, 1),
+static const union vin_data vin0_data_pins = {
+ .data24 = {
+ /* B */
+ RCAR_GP_PIN(2, 1), RCAR_GP_PIN(2, 2),
+ RCAR_GP_PIN(2, 3), RCAR_GP_PIN(2, 4),
+ RCAR_GP_PIN(2, 5), RCAR_GP_PIN(2, 6),
+ RCAR_GP_PIN(2, 7), RCAR_GP_PIN(2, 8),
+ /* G */
+ RCAR_GP_PIN(0, 8), RCAR_GP_PIN(0, 9),
+ RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 11),
+ RCAR_GP_PIN(0, 0), RCAR_GP_PIN(0, 1),
+ RCAR_GP_PIN(0, 2), RCAR_GP_PIN(0, 3),
+ /* R */
+ RCAR_GP_PIN(0, 4), RCAR_GP_PIN(0, 5),
+ RCAR_GP_PIN(0, 6), RCAR_GP_PIN(0, 7),
+ RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 25),
+ RCAR_GP_PIN(0, 26), RCAR_GP_PIN(1, 11),
+ },
+};
+static const union vin_data vin0_data_mux = {
+ .data24 = {
+ /* B */
+ VI0_DATA0_VI0_B0_MARK, VI0_DATA1_VI0_B1_MARK,
+ VI0_DATA2_VI0_B2_MARK, VI0_DATA3_VI0_B3_MARK,
+ VI0_DATA4_VI0_B4_MARK, VI0_DATA5_VI0_B5_MARK,
+ VI0_DATA6_VI0_B6_MARK, VI0_DATA7_VI0_B7_MARK,
+ /* G */
+ VI0_G0_MARK, VI0_G1_MARK,
+ VI0_G2_MARK, VI0_G3_MARK,
+ VI0_G4_MARK, VI0_G5_MARK,
+ VI0_G6_MARK, VI0_G7_MARK,
+ /* R */
+ VI0_R0_MARK, VI0_R1_MARK,
+ VI0_R2_MARK, VI0_R3_MARK,
+ VI0_R4_MARK, VI0_R5_MARK,
+ VI0_R6_MARK, VI0_R7_MARK,
+ },
+};
+static const unsigned int vin0_data18_pins[] = {
+ /* B */
+ RCAR_GP_PIN(2, 3), RCAR_GP_PIN(2, 4),
+ RCAR_GP_PIN(2, 5), RCAR_GP_PIN(2, 6),
+ RCAR_GP_PIN(2, 7), RCAR_GP_PIN(2, 8),
+ /* G */
+ RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 11),
+ RCAR_GP_PIN(0, 0), RCAR_GP_PIN(0, 1),
RCAR_GP_PIN(0, 2), RCAR_GP_PIN(0, 3),
-};
-static const unsigned int vin0_data_g_mux[] = {
- VI0_G0_MARK, VI0_G1_MARK, VI0_G2_MARK,
- VI0_G3_MARK, VI0_G4_MARK, VI0_G5_MARK,
- VI0_G6_MARK, VI0_G7_MARK,
-};
-static const unsigned int vin0_data_r_pins[] = {
- RCAR_GP_PIN(0, 4), RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 6),
- RCAR_GP_PIN(0, 7), RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 25),
+ /* R */
+ RCAR_GP_PIN(0, 6), RCAR_GP_PIN(0, 7),
+ RCAR_GP_PIN(0, 24), RCAR_GP_PIN(0, 25),
RCAR_GP_PIN(0, 26), RCAR_GP_PIN(1, 11),
};
-static const unsigned int vin0_data_r_mux[] = {
- VI0_R0_MARK, VI0_R1_MARK, VI0_R2_MARK,
- VI0_R3_MARK, VI0_R4_MARK, VI0_R5_MARK,
+static const unsigned int vin0_data18_mux[] = {
+ /* B */
+ VI0_DATA2_VI0_B2_MARK, VI0_DATA3_VI0_B3_MARK,
+ VI0_DATA4_VI0_B4_MARK, VI0_DATA5_VI0_B5_MARK,
+ VI0_DATA6_VI0_B6_MARK, VI0_DATA7_VI0_B7_MARK,
+ /* G */
+ VI0_G2_MARK, VI0_G3_MARK,
+ VI0_G4_MARK, VI0_G5_MARK,
+ VI0_G6_MARK, VI0_G7_MARK,
+ /* R */
+ VI0_R2_MARK, VI0_R3_MARK,
+ VI0_R4_MARK, VI0_R5_MARK,
VI0_R6_MARK, VI0_R7_MARK,
};
-static const unsigned int vin0_data_b_pins[] = {
- RCAR_GP_PIN(2, 1), RCAR_GP_PIN(2, 2), RCAR_GP_PIN(2, 3),
- RCAR_GP_PIN(2, 4), RCAR_GP_PIN(2, 5), RCAR_GP_PIN(2, 6),
- RCAR_GP_PIN(2, 7), RCAR_GP_PIN(2, 8),
+static const unsigned int vin0_sync_pins[] = {
+ RCAR_GP_PIN(0, 12), /* HSYNC */
+ RCAR_GP_PIN(0, 13), /* VSYNC */
};
-static const unsigned int vin0_data_b_mux[] = {
- VI0_DATA0_VI0_B0_MARK, VI0_DATA1_VI0_B1_MARK, VI0_DATA2_VI0_B2_MARK,
- VI0_DATA3_VI0_B3_MARK, VI0_DATA4_VI0_B4_MARK, VI0_DATA5_VI0_B5_MARK,
- VI0_DATA6_VI0_B6_MARK, VI0_DATA7_VI0_B7_MARK,
-};
-static const unsigned int vin0_hsync_signal_pins[] = {
- RCAR_GP_PIN(0, 12),
-};
-static const unsigned int vin0_hsync_signal_mux[] = {
+static const unsigned int vin0_sync_mux[] = {
VI0_HSYNC_N_MARK,
-};
-static const unsigned int vin0_vsync_signal_pins[] = {
- RCAR_GP_PIN(0, 13),
-};
-static const unsigned int vin0_vsync_signal_mux[] = {
VI0_VSYNC_N_MARK,
};
-static const unsigned int vin0_field_signal_pins[] = {
+static const unsigned int vin0_field_pins[] = {
RCAR_GP_PIN(0, 15),
};
-static const unsigned int vin0_field_signal_mux[] = {
+static const unsigned int vin0_field_mux[] = {
VI0_FIELD_MARK,
};
-static const unsigned int vin0_data_enable_pins[] = {
+static const unsigned int vin0_clkenb_pins[] = {
RCAR_GP_PIN(0, 14),
};
-static const unsigned int vin0_data_enable_mux[] = {
+static const unsigned int vin0_clkenb_mux[] = {
VI0_CLKENB_MARK,
};
static const unsigned int vin0_clk_pins[] = {
@@ -3076,15 +3360,91 @@
VI0_CLK_MARK,
};
/* - VIN1 ------------------------------------------------------------------- */
-static const unsigned int vin1_data_pins[] = {
- RCAR_GP_PIN(2, 10), RCAR_GP_PIN(2, 11), RCAR_GP_PIN(2, 12),
- RCAR_GP_PIN(2, 13), RCAR_GP_PIN(2, 14), RCAR_GP_PIN(2, 15),
- RCAR_GP_PIN(2, 16), RCAR_GP_PIN(2, 17),
+static const union vin_data vin1_data_pins = {
+ .data24 = {
+ /* B */
+ RCAR_GP_PIN(2, 10), RCAR_GP_PIN(2, 11),
+ RCAR_GP_PIN(2, 12), RCAR_GP_PIN(2, 13),
+ RCAR_GP_PIN(2, 14), RCAR_GP_PIN(2, 15),
+ RCAR_GP_PIN(2, 16), RCAR_GP_PIN(2, 17),
+ /* G */
+ RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 15),
+ RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 20),
+ RCAR_GP_PIN(1, 22), RCAR_GP_PIN(1, 12),
+ RCAR_GP_PIN(1, 9), RCAR_GP_PIN(1, 7),
+ /* R */
+ RCAR_GP_PIN(0, 27), RCAR_GP_PIN(0, 28),
+ RCAR_GP_PIN(0, 29), RCAR_GP_PIN(1, 4),
+ RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6),
+ RCAR_GP_PIN(1, 10), RCAR_GP_PIN(1, 8),
+ },
};
-static const unsigned int vin1_data_mux[] = {
- VI1_DATA0_VI1_B0_MARK, VI1_DATA1_VI1_B1_MARK, VI1_DATA2_VI1_B2_MARK,
- VI1_DATA3_VI1_B3_MARK, VI1_DATA4_VI1_B4_MARK, VI1_DATA5_VI1_B5_MARK,
+static const union vin_data vin1_data_mux = {
+ .data24 = {
+ /* B */
+ VI1_DATA0_VI1_B0_MARK, VI1_DATA1_VI1_B1_MARK,
+ VI1_DATA2_VI1_B2_MARK, VI1_DATA3_VI1_B3_MARK,
+ VI1_DATA4_VI1_B4_MARK, VI1_DATA5_VI1_B5_MARK,
+ VI1_DATA6_VI1_B6_MARK, VI1_DATA7_VI1_B7_MARK,
+ /* G */
+ VI1_G0_MARK, VI1_G1_MARK,
+ VI1_G2_MARK, VI1_G3_MARK,
+ VI1_G4_MARK, VI1_G5_MARK,
+ VI1_G6_MARK, VI1_G7_MARK,
+ /* R */
+ VI1_R0_MARK, VI1_R1_MARK,
+ VI1_R2_MARK, VI1_R3_MARK,
+ VI1_R4_MARK, VI1_R5_MARK,
+ VI1_R6_MARK, VI1_R7_MARK,
+ },
+};
+static const unsigned int vin1_data18_pins[] = {
+ /* B */
+ RCAR_GP_PIN(2, 12), RCAR_GP_PIN(2, 13),
+ RCAR_GP_PIN(2, 14), RCAR_GP_PIN(2, 15),
+ RCAR_GP_PIN(2, 16), RCAR_GP_PIN(2, 17),
+ /* G */
+ RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 20),
+ RCAR_GP_PIN(1, 22), RCAR_GP_PIN(1, 12),
+ RCAR_GP_PIN(1, 9), RCAR_GP_PIN(1, 7),
+ /* R */
+ RCAR_GP_PIN(0, 29), RCAR_GP_PIN(1, 4),
+ RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6),
+ RCAR_GP_PIN(1, 10), RCAR_GP_PIN(1, 8),
+};
+static const unsigned int vin1_data18_mux[] = {
+ /* B */
+ VI1_DATA2_VI1_B2_MARK, VI1_DATA3_VI1_B3_MARK,
+ VI1_DATA4_VI1_B4_MARK, VI1_DATA5_VI1_B5_MARK,
VI1_DATA6_VI1_B6_MARK, VI1_DATA7_VI1_B7_MARK,
+ /* G */
+ VI1_G2_MARK, VI1_G3_MARK,
+ VI1_G4_MARK, VI1_G5_MARK,
+ VI1_G6_MARK, VI1_G7_MARK,
+ /* R */
+ VI1_R2_MARK, VI1_R3_MARK,
+ VI1_R4_MARK, VI1_R5_MARK,
+ VI1_R6_MARK, VI1_R7_MARK,
+};
+static const unsigned int vin1_sync_pins[] = {
+ RCAR_GP_PIN(1, 24), /* HSYNC */
+ RCAR_GP_PIN(1, 25), /* VSYNC */
+};
+static const unsigned int vin1_sync_mux[] = {
+ VI1_HSYNC_N_MARK,
+ VI1_VSYNC_N_MARK,
+};
+static const unsigned int vin1_field_pins[] = {
+ RCAR_GP_PIN(1, 13),
+};
+static const unsigned int vin1_field_mux[] = {
+ VI1_FIELD_MARK,
+};
+static const unsigned int vin1_clkenb_pins[] = {
+ RCAR_GP_PIN(1, 26),
+};
+static const unsigned int vin1_clkenb_mux[] = {
+ VI1_CLKENB_MARK,
};
static const unsigned int vin1_clk_pins[] = {
RCAR_GP_PIN(2, 9),
@@ -3092,8 +3452,147 @@
static const unsigned int vin1_clk_mux[] = {
VI1_CLK_MARK,
};
+/* - VIN2 ----------------------------------------------------------------- */
+static const union vin_data vin2_data_pins = {
+ .data24 = {
+ /* B */
+ RCAR_GP_PIN(0, 8), RCAR_GP_PIN(0, 9),
+ RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 11),
+ RCAR_GP_PIN(0, 12), RCAR_GP_PIN(0, 13),
+ RCAR_GP_PIN(0, 14), RCAR_GP_PIN(0, 15),
+ /* G */
+ RCAR_GP_PIN(0, 27), RCAR_GP_PIN(0, 28),
+ RCAR_GP_PIN(0, 29), RCAR_GP_PIN(1, 10),
+ RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 5),
+ RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 7),
+ /* R */
+ RCAR_GP_PIN(1, 12), RCAR_GP_PIN(1, 13),
+ RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 15),
+ RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 20),
+ RCAR_GP_PIN(1, 22), RCAR_GP_PIN(1, 24),
+ },
+};
+static const union vin_data vin2_data_mux = {
+ .data24 = {
+ /* B */
+ VI2_DATA0_VI2_B0_MARK, VI2_DATA1_VI2_B1_MARK,
+ VI2_DATA2_VI2_B2_MARK, VI2_DATA3_VI2_B3_MARK,
+ VI2_DATA4_VI2_B4_MARK, VI2_DATA5_VI2_B5_MARK,
+ VI2_DATA6_VI2_B6_MARK, VI2_DATA7_VI2_B7_MARK,
+ /* G */
+ VI2_G0_MARK, VI2_G1_MARK,
+ VI2_G2_MARK, VI2_G3_MARK,
+ VI2_G4_MARK, VI2_G5_MARK,
+ VI2_G6_MARK, VI2_G7_MARK,
+ /* R */
+ VI2_R0_MARK, VI2_R1_MARK,
+ VI2_R2_MARK, VI2_R3_MARK,
+ VI2_R4_MARK, VI2_R5_MARK,
+ VI2_R6_MARK, VI2_R7_MARK,
+ },
+};
+static const unsigned int vin2_data18_pins[] = {
+ /* B */
+ RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 11),
+ RCAR_GP_PIN(0, 12), RCAR_GP_PIN(0, 13),
+ RCAR_GP_PIN(0, 14), RCAR_GP_PIN(0, 15),
+ /* G */
+ RCAR_GP_PIN(0, 29), RCAR_GP_PIN(1, 10),
+ RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 5),
+ RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 7),
+ /* R */
+ RCAR_GP_PIN(1, 14), RCAR_GP_PIN(1, 15),
+ RCAR_GP_PIN(1, 17), RCAR_GP_PIN(1, 20),
+ RCAR_GP_PIN(1, 22), RCAR_GP_PIN(1, 24),
+};
+static const unsigned int vin2_data18_mux[] = {
+ /* B */
+ VI2_DATA2_VI2_B2_MARK, VI2_DATA3_VI2_B3_MARK,
+ VI2_DATA4_VI2_B4_MARK, VI2_DATA5_VI2_B5_MARK,
+ VI2_DATA6_VI2_B6_MARK, VI2_DATA7_VI2_B7_MARK,
+ /* G */
+ VI2_G2_MARK, VI2_G3_MARK,
+ VI2_G4_MARK, VI2_G5_MARK,
+ VI2_G6_MARK, VI2_G7_MARK,
+ /* R */
+ VI2_R2_MARK, VI2_R3_MARK,
+ VI2_R4_MARK, VI2_R5_MARK,
+ VI2_R6_MARK, VI2_R7_MARK,
+};
+static const unsigned int vin2_sync_pins[] = {
+ RCAR_GP_PIN(1, 16), /* HSYNC */
+ RCAR_GP_PIN(1, 21), /* VSYNC */
+};
+static const unsigned int vin2_sync_mux[] = {
+ VI2_HSYNC_N_MARK,
+ VI2_VSYNC_N_MARK,
+};
+static const unsigned int vin2_field_pins[] = {
+ RCAR_GP_PIN(1, 9),
+};
+static const unsigned int vin2_field_mux[] = {
+ VI2_FIELD_MARK,
+};
+static const unsigned int vin2_clkenb_pins[] = {
+ RCAR_GP_PIN(1, 8),
+};
+static const unsigned int vin2_clkenb_mux[] = {
+ VI2_CLKENB_MARK,
+};
+static const unsigned int vin2_clk_pins[] = {
+ RCAR_GP_PIN(1, 11),
+};
+static const unsigned int vin2_clk_mux[] = {
+ VI2_CLK_MARK,
+};
+/* - VIN3 ----------------------------------------------------------------- */
+static const unsigned int vin3_data8_pins[] = {
+ RCAR_GP_PIN(0, 0), RCAR_GP_PIN(0, 1),
+ RCAR_GP_PIN(0, 2), RCAR_GP_PIN(0, 3),
+ RCAR_GP_PIN(0, 4), RCAR_GP_PIN(0, 5),
+ RCAR_GP_PIN(0, 6), RCAR_GP_PIN(0, 7),
+};
+static const unsigned int vin3_data8_mux[] = {
+ VI3_DATA0_MARK, VI3_DATA1_MARK,
+ VI3_DATA2_MARK, VI3_DATA3_MARK,
+ VI3_DATA4_MARK, VI3_DATA5_MARK,
+ VI3_DATA6_MARK, VI3_DATA7_MARK,
+};
+static const unsigned int vin3_sync_pins[] = {
+ RCAR_GP_PIN(1, 16), /* HSYNC */
+ RCAR_GP_PIN(1, 17), /* VSYNC */
+};
+static const unsigned int vin3_sync_mux[] = {
+ VI3_HSYNC_N_MARK,
+ VI2_VSYNC_N_MARK,
+};
+static const unsigned int vin3_field_pins[] = {
+ RCAR_GP_PIN(1, 15),
+};
+static const unsigned int vin3_field_mux[] = {
+ VI3_FIELD_MARK,
+};
+static const unsigned int vin3_clkenb_pins[] = {
+ RCAR_GP_PIN(1, 14),
+};
+static const unsigned int vin3_clkenb_mux[] = {
+ VI3_CLKENB_MARK,
+};
+static const unsigned int vin3_clk_pins[] = {
+ RCAR_GP_PIN(1, 23),
+};
+static const unsigned int vin3_clk_mux[] = {
+ VI3_CLK_MARK,
+};
static const struct sh_pfc_pin_group pinmux_groups[] = {
+ SH_PFC_PIN_GROUP(audio_clk_a),
+ SH_PFC_PIN_GROUP(audio_clk_b),
+ SH_PFC_PIN_GROUP(audio_clk_c),
+ SH_PFC_PIN_GROUP(audio_clkout),
+ SH_PFC_PIN_GROUP(audio_clkout_b),
+ SH_PFC_PIN_GROUP(audio_clkout_c),
+ SH_PFC_PIN_GROUP(audio_clkout_d),
SH_PFC_PIN_GROUP(du_rgb666),
SH_PFC_PIN_GROUP(du_rgb888),
SH_PFC_PIN_GROUP(du_clk_out_0),
@@ -3259,6 +3758,32 @@
SH_PFC_PIN_GROUP(sdhi3_ctrl),
SH_PFC_PIN_GROUP(sdhi3_cd),
SH_PFC_PIN_GROUP(sdhi3_wp),
+ SH_PFC_PIN_GROUP(ssi0_data),
+ SH_PFC_PIN_GROUP(ssi0129_ctrl),
+ SH_PFC_PIN_GROUP(ssi1_data),
+ SH_PFC_PIN_GROUP(ssi1_ctrl),
+ SH_PFC_PIN_GROUP(ssi2_data),
+ SH_PFC_PIN_GROUP(ssi2_ctrl),
+ SH_PFC_PIN_GROUP(ssi3_data),
+ SH_PFC_PIN_GROUP(ssi34_ctrl),
+ SH_PFC_PIN_GROUP(ssi4_data),
+ SH_PFC_PIN_GROUP(ssi4_ctrl),
+ SH_PFC_PIN_GROUP(ssi5),
+ SH_PFC_PIN_GROUP(ssi5_b),
+ SH_PFC_PIN_GROUP(ssi5_c),
+ SH_PFC_PIN_GROUP(ssi6),
+ SH_PFC_PIN_GROUP(ssi6_b),
+ SH_PFC_PIN_GROUP(ssi7_data),
+ SH_PFC_PIN_GROUP(ssi7_b_data),
+ SH_PFC_PIN_GROUP(ssi7_c_data),
+ SH_PFC_PIN_GROUP(ssi78_ctrl),
+ SH_PFC_PIN_GROUP(ssi78_b_ctrl),
+ SH_PFC_PIN_GROUP(ssi78_c_ctrl),
+ SH_PFC_PIN_GROUP(ssi8_data),
+ SH_PFC_PIN_GROUP(ssi8_b_data),
+ SH_PFC_PIN_GROUP(ssi8_c_data),
+ SH_PFC_PIN_GROUP(ssi9_data),
+ SH_PFC_PIN_GROUP(ssi9_ctrl),
SH_PFC_PIN_GROUP(tpu0_to0),
SH_PFC_PIN_GROUP(tpu0_to1),
SH_PFC_PIN_GROUP(tpu0_to2),
@@ -3266,16 +3791,54 @@
SH_PFC_PIN_GROUP(usb0),
SH_PFC_PIN_GROUP(usb1),
SH_PFC_PIN_GROUP(usb2),
- SH_PFC_PIN_GROUP(vin0_data_g),
- SH_PFC_PIN_GROUP(vin0_data_r),
- SH_PFC_PIN_GROUP(vin0_data_b),
- SH_PFC_PIN_GROUP(vin0_hsync_signal),
- SH_PFC_PIN_GROUP(vin0_vsync_signal),
- SH_PFC_PIN_GROUP(vin0_field_signal),
- SH_PFC_PIN_GROUP(vin0_data_enable),
+ VIN_DATA_PIN_GROUP(vin0_data, 24),
+ VIN_DATA_PIN_GROUP(vin0_data, 20),
+ SH_PFC_PIN_GROUP(vin0_data18),
+ VIN_DATA_PIN_GROUP(vin0_data, 16),
+ VIN_DATA_PIN_GROUP(vin0_data, 12),
+ VIN_DATA_PIN_GROUP(vin0_data, 10),
+ VIN_DATA_PIN_GROUP(vin0_data, 8),
+ VIN_DATA_PIN_GROUP(vin0_data, 4),
+ SH_PFC_PIN_GROUP(vin0_sync),
+ SH_PFC_PIN_GROUP(vin0_field),
+ SH_PFC_PIN_GROUP(vin0_clkenb),
SH_PFC_PIN_GROUP(vin0_clk),
- SH_PFC_PIN_GROUP(vin1_data),
+ VIN_DATA_PIN_GROUP(vin1_data, 24),
+ VIN_DATA_PIN_GROUP(vin1_data, 20),
+ SH_PFC_PIN_GROUP(vin1_data18),
+ VIN_DATA_PIN_GROUP(vin1_data, 16),
+ VIN_DATA_PIN_GROUP(vin1_data, 12),
+ VIN_DATA_PIN_GROUP(vin1_data, 10),
+ VIN_DATA_PIN_GROUP(vin1_data, 8),
+ VIN_DATA_PIN_GROUP(vin1_data, 4),
+ SH_PFC_PIN_GROUP(vin1_sync),
+ SH_PFC_PIN_GROUP(vin1_field),
+ SH_PFC_PIN_GROUP(vin1_clkenb),
SH_PFC_PIN_GROUP(vin1_clk),
+ VIN_DATA_PIN_GROUP(vin2_data, 24),
+ SH_PFC_PIN_GROUP(vin2_data18),
+ VIN_DATA_PIN_GROUP(vin2_data, 16),
+ VIN_DATA_PIN_GROUP(vin2_data, 8),
+ VIN_DATA_PIN_GROUP(vin2_data, 4),
+ SH_PFC_PIN_GROUP(vin2_sync),
+ SH_PFC_PIN_GROUP(vin2_field),
+ SH_PFC_PIN_GROUP(vin2_clkenb),
+ SH_PFC_PIN_GROUP(vin2_clk),
+ SH_PFC_PIN_GROUP(vin3_data8),
+ SH_PFC_PIN_GROUP(vin3_sync),
+ SH_PFC_PIN_GROUP(vin3_field),
+ SH_PFC_PIN_GROUP(vin3_clkenb),
+ SH_PFC_PIN_GROUP(vin3_clk),
+};
+
+static const char * const audio_clk_groups[] = {
+ "audio_clk_a",
+ "audio_clk_b",
+ "audio_clk_c",
+ "audio_clkout",
+ "audio_clkout_b",
+ "audio_clkout_c",
+ "audio_clkout_d",
};
static const char * const du_groups[] = {
@@ -3533,6 +4096,35 @@
"sdhi3_wp",
};
+static const char * const ssi_groups[] = {
+ "ssi0_data",
+ "ssi0129_ctrl",
+ "ssi1_data",
+ "ssi1_ctrl",
+ "ssi2_data",
+ "ssi2_ctrl",
+ "ssi3_data",
+ "ssi34_ctrl",
+ "ssi4_data",
+ "ssi4_ctrl",
+ "ssi5",
+ "ssi5_b",
+ "ssi5_c",
+ "ssi6",
+ "ssi6_b",
+ "ssi7_data",
+ "ssi7_b_data",
+ "ssi7_c_data",
+ "ssi78_ctrl",
+ "ssi78_b_ctrl",
+ "ssi78_c_ctrl",
+ "ssi8_data",
+ "ssi8_b_data",
+ "ssi8_c_data",
+ "ssi9_data",
+ "ssi9_ctrl",
+};
+
static const char * const tpu0_groups[] = {
"tpu0_to0",
"tpu0_to1",
@@ -3553,22 +4145,57 @@
};
static const char * const vin0_groups[] = {
- "vin0_data_g",
- "vin0_data_r",
- "vin0_data_b",
- "vin0_hsync_signal",
- "vin0_vsync_signal",
- "vin0_field_signal",
- "vin0_data_enable",
+ "vin0_data24",
+ "vin0_data20",
+ "vin0_data18",
+ "vin0_data16",
+ "vin0_data12",
+ "vin0_data10",
+ "vin0_data8",
+ "vin0_data4",
+ "vin0_sync",
+ "vin0_field",
+ "vin0_clkenb",
"vin0_clk",
};
static const char * const vin1_groups[] = {
- "vin1_data",
+ "vin1_data24",
+ "vin1_data20",
+ "vin1_data18",
+ "vin1_data16",
+ "vin1_data12",
+ "vin1_data10",
+ "vin1_data8",
+ "vin1_data4",
+ "vin1_sync",
+ "vin1_field",
+ "vin1_clkenb",
"vin1_clk",
};
+static const char * const vin2_groups[] = {
+ "vin2_data24",
+ "vin2_data18",
+ "vin2_data16",
+ "vin2_data8",
+ "vin2_data4",
+ "vin2_sync",
+ "vin2_field",
+ "vin2_clkenb",
+ "vin2_clk",
+};
+
+static const char * const vin3_groups[] = {
+ "vin3_data8",
+ "vin3_sync",
+ "vin3_field",
+ "vin3_clkenb",
+ "vin3_clk",
+};
+
static const struct sh_pfc_function pinmux_functions[] = {
+ SH_PFC_FUNCTION(audio_clk),
SH_PFC_FUNCTION(du),
SH_PFC_FUNCTION(du0),
SH_PFC_FUNCTION(du1),
@@ -3599,12 +4226,15 @@
SH_PFC_FUNCTION(sdhi1),
SH_PFC_FUNCTION(sdhi2),
SH_PFC_FUNCTION(sdhi3),
+ SH_PFC_FUNCTION(ssi),
SH_PFC_FUNCTION(tpu0),
SH_PFC_FUNCTION(usb0),
SH_PFC_FUNCTION(usb1),
SH_PFC_FUNCTION(usb2),
SH_PFC_FUNCTION(vin0),
SH_PFC_FUNCTION(vin1),
+ SH_PFC_FUNCTION(vin2),
+ SH_PFC_FUNCTION(vin3),
};
static struct pinmux_cfg_reg pinmux_config_regs[] = {
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
index bf76a65..ea02d37 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -1730,11 +1730,11 @@
static const unsigned int du_clk_out_1_mux[] = {
DU1_DOTCLKOUT1_MARK
};
-static const unsigned int du_sync_1_pins[] = {
+static const unsigned int du_sync_pins[] = {
/* EXVSYNC/VSYNC, EXHSYNC/HSYNC, EXDISP/EXODDF/EXCDE */
RCAR_GP_PIN(3, 29), RCAR_GP_PIN(3, 28), RCAR_GP_PIN(3, 27),
};
-static const unsigned int du_sync_1_mux[] = {
+static const unsigned int du_sync_mux[] = {
DU1_EXODDF_DU1_ODDF_DISP_CDE_MARK,
DU1_EXVSYNC_DU1_VSYNC_MARK, DU1_EXHSYNC_DU1_HSYNC_MARK
};
@@ -1742,6 +1742,9 @@
/* CDE DISP */
RCAR_GP_PIN(3, 31), RCAR_GP_PIN(3, 30),
};
+static const unsigned int du_cde_disp_mux[] = {
+ DU1_CDE_MARK, DU1_DISP_MARK
+};
static const unsigned int du0_clk_in_pins[] = {
/* CLKIN */
RCAR_GP_PIN(6, 31),
@@ -1749,15 +1752,26 @@
static const unsigned int du0_clk_in_mux[] = {
DU0_DOTCLKIN_MARK
};
-static const unsigned int du_cde_disp_mux[] = {
- DU1_CDE_MARK, DU1_DISP_MARK
-};
static const unsigned int du1_clk_in_pins[] = {
/* CLKIN */
- RCAR_GP_PIN(7, 20), RCAR_GP_PIN(7, 19), RCAR_GP_PIN(3, 24),
+ RCAR_GP_PIN(3, 24),
};
static const unsigned int du1_clk_in_mux[] = {
- DU1_DOTCLKIN_C_MARK, DU1_DOTCLKIN_B_MARK, DU1_DOTCLKIN_MARK
+ DU1_DOTCLKIN_MARK
+};
+static const unsigned int du1_clk_in_b_pins[] = {
+ /* CLKIN */
+ RCAR_GP_PIN(7, 19),
+};
+static const unsigned int du1_clk_in_b_mux[] = {
+ DU1_DOTCLKIN_B_MARK,
+};
+static const unsigned int du1_clk_in_c_pins[] = {
+ /* CLKIN */
+ RCAR_GP_PIN(7, 20),
+};
+static const unsigned int du1_clk_in_c_mux[] = {
+ DU1_DOTCLKIN_C_MARK,
};
/* - ETH -------------------------------------------------------------------- */
static const unsigned int eth_link_pins[] = {
@@ -2670,10 +2684,12 @@
SH_PFC_PIN_GROUP(du_rgb888),
SH_PFC_PIN_GROUP(du_clk_out_0),
SH_PFC_PIN_GROUP(du_clk_out_1),
- SH_PFC_PIN_GROUP(du_sync_1),
+ SH_PFC_PIN_GROUP(du_sync),
SH_PFC_PIN_GROUP(du_cde_disp),
SH_PFC_PIN_GROUP(du0_clk_in),
SH_PFC_PIN_GROUP(du1_clk_in),
+ SH_PFC_PIN_GROUP(du1_clk_in_b),
+ SH_PFC_PIN_GROUP(du1_clk_in_c),
SH_PFC_PIN_GROUP(eth_link),
SH_PFC_PIN_GROUP(eth_magic),
SH_PFC_PIN_GROUP(eth_mdio),
@@ -2805,7 +2821,7 @@
"du_rgb888",
"du_clk_out_0",
"du_clk_out_1",
- "du_sync_1",
+ "du_sync",
"du_cde_disp",
};
@@ -2815,6 +2831,8 @@
static const char * const du1_groups[] = {
"du1_clk_in",
+ "du1_clk_in_b",
+ "du1_clk_in_c",
};
static const char * const eth_groups[] = {
@@ -2840,20 +2858,29 @@
static const char * const msiof0_groups[] = {
"msiof0_clk",
- "msiof0_ctrl",
- "msiof0_data",
+ "msiof0_sync",
+ "msiof0_ss1",
+ "msiof0_ss2",
+ "msiof0_rx",
+ "msiof0_tx",
};
static const char * const msiof1_groups[] = {
"msiof1_clk",
- "msiof1_ctrl",
- "msiof1_data",
+ "msiof1_sync",
+ "msiof1_ss1",
+ "msiof1_ss2",
+ "msiof1_rx",
+ "msiof1_tx",
};
static const char * const msiof2_groups[] = {
"msiof2_clk",
- "msiof2_ctrl",
- "msiof2_data",
+ "msiof2_sync",
+ "msiof2_ss1",
+ "msiof2_ss2",
+ "msiof2_rx",
+ "msiof2_tx",
};
static const char * const scif0_groups[] = {
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7372.c b/drivers/pinctrl/sh-pfc/pfc-sh7372.c
index cc097b6..9f66a50 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7372.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7372.c
@@ -2118,17 +2118,6 @@
SH_PFC_FUNCTION(usb1),
};
-#undef PORTCR
-#define PORTCR(nr, reg) \
- { \
- PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, \
- PORT##nr##_FN2, PORT##nr##_FN3, \
- PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
-
static const struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xE6051000), /* PORT0CR */
PORTCR(1, 0xE6051001), /* PORT1CR */
@@ -2585,7 +2574,7 @@
&sh7372_portcr_offsets[i];
if (pin <= group->end_pin)
- return pfc->window->virt + group->offset + pin;
+ return pfc->windows->virt + group->offset + pin;
}
return NULL;
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
index 7e278a9..dc7c7fb 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
@@ -3138,16 +3138,6 @@
SH_PFC_FUNCTION(usb),
};
-#undef PORTCR
-#define PORTCR(nr, reg) \
- { \
- PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \
- PORT##nr##_FN0, PORT##nr##_FN1, \
- PORT##nr##_FN2, PORT##nr##_FN3, \
- PORT##nr##_FN4, PORT##nr##_FN5, \
- PORT##nr##_FN6, PORT##nr##_FN7 } \
- }
static const struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */
@@ -3661,38 +3651,38 @@
};
static const struct pinmux_irq pinmux_irqs[] = {
- PINMUX_IRQ(irq_pin(19), 9),
- PINMUX_IRQ(irq_pin(1), 10),
PINMUX_IRQ(irq_pin(0), 11),
+ PINMUX_IRQ(irq_pin(1), 10),
+ PINMUX_IRQ(irq_pin(2), 149),
+ PINMUX_IRQ(irq_pin(3), 224),
+ PINMUX_IRQ(irq_pin(4), 159),
+ PINMUX_IRQ(irq_pin(5), 227),
+ PINMUX_IRQ(irq_pin(6), 147),
+ PINMUX_IRQ(irq_pin(7), 150),
+ PINMUX_IRQ(irq_pin(8), 223),
+ PINMUX_IRQ(irq_pin(9), 56, 308),
+ PINMUX_IRQ(irq_pin(10), 54),
+ PINMUX_IRQ(irq_pin(11), 238),
+ PINMUX_IRQ(irq_pin(12), 156),
+ PINMUX_IRQ(irq_pin(13), 239),
+ PINMUX_IRQ(irq_pin(14), 251),
+ PINMUX_IRQ(irq_pin(15), 0),
+ PINMUX_IRQ(irq_pin(16), 249),
+ PINMUX_IRQ(irq_pin(17), 234),
PINMUX_IRQ(irq_pin(18), 13),
+ PINMUX_IRQ(irq_pin(19), 9),
PINMUX_IRQ(irq_pin(20), 14),
PINMUX_IRQ(irq_pin(21), 15),
- PINMUX_IRQ(irq_pin(31), 26),
- PINMUX_IRQ(irq_pin(30), 27),
- PINMUX_IRQ(irq_pin(29), 28),
PINMUX_IRQ(irq_pin(22), 40),
PINMUX_IRQ(irq_pin(23), 53),
- PINMUX_IRQ(irq_pin(10), 54),
- PINMUX_IRQ(irq_pin(9), 56),
+ PINMUX_IRQ(irq_pin(24), 118),
+ PINMUX_IRQ(irq_pin(25), 164),
PINMUX_IRQ(irq_pin(26), 115),
PINMUX_IRQ(irq_pin(27), 116),
PINMUX_IRQ(irq_pin(28), 117),
- PINMUX_IRQ(irq_pin(24), 118),
- PINMUX_IRQ(irq_pin(6), 147),
- PINMUX_IRQ(irq_pin(2), 149),
- PINMUX_IRQ(irq_pin(7), 150),
- PINMUX_IRQ(irq_pin(12), 156),
- PINMUX_IRQ(irq_pin(4), 159),
- PINMUX_IRQ(irq_pin(25), 164),
- PINMUX_IRQ(irq_pin(8), 223),
- PINMUX_IRQ(irq_pin(3), 224),
- PINMUX_IRQ(irq_pin(5), 227),
- PINMUX_IRQ(irq_pin(17), 234),
- PINMUX_IRQ(irq_pin(11), 238),
- PINMUX_IRQ(irq_pin(13), 239),
- PINMUX_IRQ(irq_pin(16), 249),
- PINMUX_IRQ(irq_pin(14), 251),
- PINMUX_IRQ(irq_pin(9), 308),
+ PINMUX_IRQ(irq_pin(29), 28),
+ PINMUX_IRQ(irq_pin(30), 27),
+ PINMUX_IRQ(irq_pin(31), 26),
};
/* -----------------------------------------------------------------------------
@@ -3702,7 +3692,7 @@
static void sh73a0_vccq_mc0_endisable(struct regulator_dev *reg, bool enable)
{
struct sh_pfc *pfc = reg->reg_data;
- void __iomem *addr = pfc->window[1].virt + 4;
+ void __iomem *addr = pfc->windows[1].virt + 4;
unsigned long flags;
u32 value;
@@ -3735,7 +3725,7 @@
static int sh73a0_vccq_mc0_is_enabled(struct regulator_dev *reg)
{
struct sh_pfc *pfc = reg->reg_data;
- void __iomem *addr = pfc->window[1].virt + 4;
+ void __iomem *addr = pfc->windows[1].virt + 4;
unsigned long flags;
u32 value;
@@ -3794,7 +3784,7 @@
static unsigned int sh73a0_pinmux_get_bias(struct sh_pfc *pfc, unsigned int pin)
{
- void __iomem *addr = pfc->window->virt
+ void __iomem *addr = pfc->windows->virt
+ sh73a0_portcr_offsets[pin >> 5] + pin;
u32 value = ioread8(addr) & PORTnCR_PULMD_MASK;
@@ -3812,7 +3802,7 @@
static void sh73a0_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
unsigned int bias)
{
- void __iomem *addr = pfc->window->virt
+ void __iomem *addr = pfc->windows->virt
+ sh73a0_portcr_offsets[pin >> 5] + pin;
u32 value = ioread8(addr) & ~PORTnCR_PULMD_MASK;
diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h b/drivers/pinctrl/sh-pfc/sh_pfc.h
index 11bd0d9..e17ccab 100644
--- a/drivers/pinctrl/sh-pfc/sh_pfc.h
+++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
@@ -94,11 +94,11 @@
struct pinmux_irq {
int irq;
- unsigned short *gpios;
+ short *gpios;
};
#define PINMUX_IRQ(irq_nr, ids...) \
- { .irq = irq_nr, .gpios = (unsigned short []) { ids, 0 } } \
+ { .irq = irq_nr, .gpios = (short []) { ids, -1 } }
struct pinmux_range {
u16 begin;
@@ -304,8 +304,7 @@
#define PORTCR(nr, reg) \
{ \
PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
- _PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
- PORT##nr##_IN_PU, PORT##nr##_OUT), \
+ _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT), \
PORT##nr##_FN0, PORT##nr##_FN1, \
PORT##nr##_FN2, PORT##nr##_FN3, \
PORT##nr##_FN4, PORT##nr##_FN5, \
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index eb1f1ef..9fc66e8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -448,6 +448,7 @@
config SPI_TEGRA114
tristate "NVIDIA Tegra114 SPI Controller"
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+ depends on RESET_CONTROLLER
help
SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
is different than the older SoCs SPI controller and also register interface
@@ -456,6 +457,7 @@
config SPI_TEGRA20_SFLASH
tristate "Nvidia Tegra20 Serial flash Controller"
depends on ARCH_TEGRA || COMPILE_TEST
+ depends on RESET_CONTROLLER
help
SPI driver for Nvidia Tegra20 Serial flash Controller interface.
The main usecase of this controller is to use spi flash as boot
@@ -464,6 +466,7 @@
config SPI_TEGRA20_SLINK
tristate "Nvidia Tegra20/Tegra30 SLINK Controller"
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+ depends on RESET_CONTROLLER
help
SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index aaecfb3..c860498 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -17,7 +17,6 @@
*/
#include <linux/clk.h>
-#include <linux/clk/tegra.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
@@ -34,6 +33,7 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/reset.h>
#include <linux/spi/spi.h>
#define SPI_COMMAND1 0x000
@@ -174,10 +174,10 @@
spinlock_t lock;
struct clk *clk;
+ struct reset_control *rst;
void __iomem *base;
phys_addr_t phys;
unsigned irq;
- int dma_req_sel;
u32 spi_max_frequency;
u32 cur_speed;
@@ -600,15 +600,15 @@
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!dma_chan) {
- dev_err(tspi->dev,
- "Dma channel is not available, will try later\n");
- return -EPROBE_DEFER;
+ dma_chan = dma_request_slave_channel_reason(tspi->dev,
+ dma_to_memory ? "rx" : "tx");
+ if (IS_ERR(dma_chan)) {
+ ret = PTR_ERR(dma_chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(tspi->dev,
+ "Dma channel is not available: %d\n", ret);
+ return ret;
}
dma_buf = dma_alloc_coherent(tspi->dev, tspi->dma_buf_size,
@@ -619,7 +619,6 @@
return -ENOMEM;
}
- dma_sconfig.slave_id = tspi->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tspi->phys + SPI_RX_FIFO;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -918,9 +917,9 @@
tspi->status_reg);
dev_err(tspi->dev, "CpuXfer 0x%08x:0x%08x\n",
tspi->command1_reg, tspi->dma_control_reg);
- tegra_periph_reset_assert(tspi->clk);
+ reset_control_assert(tspi->rst);
udelay(2);
- tegra_periph_reset_deassert(tspi->clk);
+ reset_control_deassert(tspi->rst);
complete(&tspi->xfer_completion);
goto exit;
}
@@ -990,9 +989,9 @@
tspi->status_reg);
dev_err(tspi->dev, "DmaXfer 0x%08x:0x%08x\n",
tspi->command1_reg, tspi->dma_control_reg);
- tegra_periph_reset_assert(tspi->clk);
+ reset_control_assert(tspi->rst);
udelay(2);
- tegra_periph_reset_deassert(tspi->clk);
+ reset_control_deassert(tspi->rst);
complete(&tspi->xfer_completion);
spin_unlock_irqrestore(&tspi->lock, flags);
return IRQ_HANDLED;
@@ -1054,11 +1053,6 @@
struct tegra_spi_data *tspi)
{
struct device_node *np = pdev->dev.of_node;
- u32 of_dma[2];
-
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0)
- tspi->dma_req_sel = of_dma[1];
if (of_property_read_u32(np, "spi-max-frequency",
&tspi->spi_max_frequency))
@@ -1127,25 +1121,25 @@
goto exit_free_irq;
}
+ tspi->rst = devm_reset_control_get(&pdev->dev, "spi");
+ if (IS_ERR(tspi->rst)) {
+ dev_err(&pdev->dev, "can not get reset\n");
+ ret = PTR_ERR(tspi->rst);
+ goto exit_free_irq;
+ }
+
tspi->max_buf_size = SPI_FIFO_DEPTH << 2;
tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
- if (tspi->dma_req_sel) {
- ret = tegra_spi_init_dma_param(tspi, true);
- if (ret < 0) {
- dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
- goto exit_free_irq;
- }
-
- ret = tegra_spi_init_dma_param(tspi, false);
- if (ret < 0) {
- dev_err(&pdev->dev, "TxDma Init failed, err %d\n", ret);
- goto exit_rx_dma_free;
- }
- tspi->max_buf_size = tspi->dma_buf_size;
- init_completion(&tspi->tx_dma_complete);
- init_completion(&tspi->rx_dma_complete);
- }
+ ret = tegra_spi_init_dma_param(tspi, true);
+ if (ret < 0)
+ goto exit_free_irq;
+ ret = tegra_spi_init_dma_param(tspi, false);
+ if (ret < 0)
+ goto exit_rx_dma_free;
+ tspi->max_buf_size = tspi->dma_buf_size;
+ init_completion(&tspi->tx_dma_complete);
+ init_completion(&tspi->rx_dma_complete);
init_completion(&tspi->xfer_completion);
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index 4dc8e81..e6f382b 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -32,8 +32,8 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/reset.h>
#include <linux/spi/spi.h>
-#include <linux/clk/tegra.h>
#define SPI_COMMAND 0x000
#define SPI_GO BIT(30)
@@ -118,6 +118,7 @@
spinlock_t lock;
struct clk *clk;
+ struct reset_control *rst;
void __iomem *base;
unsigned irq;
u32 spi_max_frequency;
@@ -389,9 +390,9 @@
dev_err(tsd->dev,
"CpuXfer 0x%08x:0x%08x\n", tsd->command_reg,
tsd->dma_control_reg);
- tegra_periph_reset_assert(tsd->clk);
+ reset_control_assert(tsd->rst);
udelay(2);
- tegra_periph_reset_deassert(tsd->clk);
+ reset_control_deassert(tsd->rst);
complete(&tsd->xfer_completion);
goto exit;
}
@@ -505,6 +506,13 @@
goto exit_free_irq;
}
+ tsd->rst = devm_reset_control_get(&pdev->dev, "spi");
+ if (IS_ERR(tsd->rst)) {
+ dev_err(&pdev->dev, "can not get reset\n");
+ ret = PTR_ERR(tsd->rst);
+ goto exit_free_irq;
+ }
+
init_completion(&tsd->xfer_completion);
pm_runtime_enable(&pdev->dev);
if (!pm_runtime_enabled(&pdev->dev)) {
@@ -520,9 +528,9 @@
}
/* Reset controller */
- tegra_periph_reset_assert(tsd->clk);
+ reset_control_assert(tsd->rst);
udelay(2);
- tegra_periph_reset_deassert(tsd->clk);
+ reset_control_deassert(tsd->rst);
tsd->def_command_reg = SPI_M_S | SPI_CS_SW;
tegra_sflash_writel(tsd, tsd->def_command_reg, SPI_COMMAND);
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index e66715b..a728bb8 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -33,8 +33,8 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/reset.h>
#include <linux/spi/spi.h>
-#include <linux/clk/tegra.h>
#define SLINK_COMMAND 0x000
#define SLINK_BIT_LENGTH(x) (((x) & 0x1f) << 0)
@@ -167,10 +167,10 @@
spinlock_t lock;
struct clk *clk;
+ struct reset_control *rst;
void __iomem *base;
phys_addr_t phys;
unsigned irq;
- int dma_req_sel;
u32 spi_max_frequency;
u32 cur_speed;
@@ -629,15 +629,15 @@
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!dma_chan) {
- dev_err(tspi->dev,
- "Dma channel is not available, will try later\n");
- return -EPROBE_DEFER;
+ dma_chan = dma_request_slave_channel_reason(tspi->dev,
+ dma_to_memory ? "rx" : "tx");
+ if (IS_ERR(dma_chan)) {
+ ret = PTR_ERR(dma_chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(tspi->dev,
+ "Dma channel is not available: %d\n", ret);
+ return ret;
}
dma_buf = dma_alloc_coherent(tspi->dev, tspi->dma_buf_size,
@@ -648,7 +648,6 @@
return -ENOMEM;
}
- dma_sconfig.slave_id = tspi->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tspi->phys + SLINK_RX_FIFO;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -884,9 +883,9 @@
dev_err(tspi->dev,
"CpuXfer 0x%08x:0x%08x:0x%08x\n", tspi->command_reg,
tspi->command2_reg, tspi->dma_control_reg);
- tegra_periph_reset_assert(tspi->clk);
+ reset_control_assert(tspi->rst);
udelay(2);
- tegra_periph_reset_deassert(tspi->clk);
+ reset_control_deassert(tspi->rst);
complete(&tspi->xfer_completion);
goto exit;
}
@@ -957,9 +956,9 @@
dev_err(tspi->dev,
"DmaXfer 0x%08x:0x%08x:0x%08x\n", tspi->command_reg,
tspi->command2_reg, tspi->dma_control_reg);
- tegra_periph_reset_assert(tspi->clk);
+ reset_control_assert(tspi->rst);
udelay(2);
- tegra_periph_reset_deassert(tspi->clk);
+ reset_control_assert(tspi->rst);
complete(&tspi->xfer_completion);
spin_unlock_irqrestore(&tspi->lock, flags);
return IRQ_HANDLED;
@@ -1020,11 +1019,6 @@
static void tegra_slink_parse_dt(struct tegra_slink_data *tspi)
{
struct device_node *np = tspi->dev->of_node;
- u32 of_dma[2];
-
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0)
- tspi->dma_req_sel = of_dma[1];
if (of_property_read_u32(np, "spi-max-frequency",
&tspi->spi_max_frequency))
@@ -1118,25 +1112,25 @@
goto exit_free_irq;
}
+ tspi->rst = devm_reset_control_get(&pdev->dev, "spi");
+ if (IS_ERR(tspi->rst)) {
+ dev_err(&pdev->dev, "can not get reset\n");
+ ret = PTR_ERR(tspi->rst);
+ goto exit_free_irq;
+ }
+
tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
- if (tspi->dma_req_sel) {
- ret = tegra_slink_init_dma_param(tspi, true);
- if (ret < 0) {
- dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
- goto exit_free_irq;
- }
-
- ret = tegra_slink_init_dma_param(tspi, false);
- if (ret < 0) {
- dev_err(&pdev->dev, "TxDma Init failed, err %d\n", ret);
- goto exit_rx_dma_free;
- }
- tspi->max_buf_size = tspi->dma_buf_size;
- init_completion(&tspi->tx_dma_complete);
- init_completion(&tspi->rx_dma_complete);
- }
+ ret = tegra_slink_init_dma_param(tspi, true);
+ if (ret < 0)
+ goto exit_free_irq;
+ ret = tegra_slink_init_dma_param(tspi, false);
+ if (ret < 0)
+ goto exit_rx_dma_free;
+ tspi->max_buf_size = tspi->dma_buf_size;
+ init_completion(&tspi->tx_dma_complete);
+ init_completion(&tspi->rx_dma_complete);
init_completion(&tspi->xfer_completion);
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 49ea76b..986870593 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -36,7 +36,6 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
-#include <linux/clk/tegra.h>
#include "nvec.h"
@@ -734,9 +733,9 @@
clk_prepare_enable(nvec->i2c_clk);
- tegra_periph_reset_assert(nvec->i2c_clk);
+ reset_control_assert(nvec->rst);
udelay(2);
- tegra_periph_reset_deassert(nvec->i2c_clk);
+ reset_control_deassert(nvec->rst);
val = I2C_CNFG_NEW_MASTER_SFM | I2C_CNFG_PACKET_MODE_EN |
(0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
@@ -837,6 +836,12 @@
return -ENODEV;
}
+ nvec->rst = devm_reset_control_get(&pdev->dev, "i2c");
+ if (IS_ERR(nvec->rst)) {
+ dev_err(nvec->dev, "failed to get controller reset\n");
+ return PTR_ERR(nvec->rst);
+ }
+
nvec->base = base;
nvec->irq = res->start;
nvec->i2c_clk = i2c_clk;
diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h
index e880518..e271375 100644
--- a/drivers/staging/nvec/nvec.h
+++ b/drivers/staging/nvec/nvec.h
@@ -23,6 +23,7 @@
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
+#include <linux/reset.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
@@ -109,7 +110,8 @@
* @irq: The IRQ of the I2C device
* @i2c_addr: The address of the I2C slave
* @base: The base of the memory mapped region of the I2C device
- * @clk: The clock of the I2C device
+ * @i2c_clk: The clock of the I2C device
+ * @rst: The reset of the I2C device
* @notifier_list: Notifiers to be called on received messages, see
* nvec_register_notifier()
* @rx_data: Received messages that have to be processed
@@ -139,6 +141,7 @@
int i2c_addr;
void __iomem *base;
struct clk *i2c_clk;
+ struct reset_control *rst;
struct atomic_notifier_head notifier_list;
struct list_head rx_data, tx_data;
struct notifier_block nvec_status_notifier;
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index dfe79cc..d5c2a28 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -34,6 +34,7 @@
#include <linux/of_device.h>
#include <linux/pagemap.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
@@ -44,8 +45,6 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/clk/tegra.h>
-
#define TEGRA_UART_TYPE "TEGRA_UART"
#define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE)
#define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3)
@@ -103,6 +102,7 @@
const struct tegra_uart_chip_data *cdata;
struct clk *uart_clk;
+ struct reset_control *rst;
unsigned int current_baud;
/* Register shadow */
@@ -120,7 +120,6 @@
bool rx_timeout;
int rx_in_progress;
int symb_bit;
- int dma_req_sel;
struct dma_chan *rx_dma_chan;
struct dma_chan *tx_dma_chan;
@@ -832,9 +831,9 @@
clk_prepare_enable(tup->uart_clk);
/* Reset the UART controller to clear all previous status.*/
- tegra_periph_reset_assert(tup->uart_clk);
+ reset_control_assert(tup->rst);
udelay(10);
- tegra_periph_reset_deassert(tup->uart_clk);
+ reset_control_deassert(tup->rst);
tup->rx_in_progress = 0;
tup->tx_in_progress = 0;
@@ -910,15 +909,14 @@
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!dma_chan) {
+ dma_chan = dma_request_slave_channel_reason(tup->uport.dev,
+ dma_to_memory ? "rx" : "tx");
+ if (IS_ERR(dma_chan)) {
+ ret = PTR_ERR(dma_chan);
dev_err(tup->uport.dev,
- "Dma channel is not available, will try later\n");
- return -EPROBE_DEFER;
+ "DMA channel alloc failed: %d\n", ret);
+ return ret;
}
if (dma_to_memory) {
@@ -938,7 +936,6 @@
dma_buf = tup->uport.state->xmit.buf;
}
- dma_sconfig.slave_id = tup->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tup->uport.mapbase;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -1222,17 +1219,8 @@
struct tegra_uart_port *tup)
{
struct device_node *np = pdev->dev.of_node;
- u32 of_dma[2];
int port;
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0) {
- tup->dma_req_sel = of_dma[1];
- } else {
- dev_err(&pdev->dev, "missing dma requestor in device tree\n");
- return -EINVAL;
- }
-
port = of_alias_get_id(np, "serial");
if (port < 0) {
dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
@@ -1320,6 +1308,12 @@
return PTR_ERR(tup->uart_clk);
}
+ tup->rst = devm_reset_control_get(&pdev->dev, "serial");
+ if (IS_ERR(tup->rst)) {
+ dev_err(&pdev->dev, "Couldn't get the reset\n");
+ return PTR_ERR(tup->rst);
+ }
+
u->iotype = UPIO_MEM32;
u->irq = platform_get_irq(pdev, 0);
u->regshift = 2;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7d8103c..1a3fc7a 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -421,9 +421,9 @@
pm_runtime_get_sync(sci_port->port.dev);
- clk_enable(sci_port->iclk);
+ clk_prepare_enable(sci_port->iclk);
sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
- clk_enable(sci_port->fclk);
+ clk_prepare_enable(sci_port->fclk);
}
static void sci_port_disable(struct sci_port *sci_port)
@@ -431,8 +431,16 @@
if (!sci_port->port.dev)
return;
- clk_disable(sci_port->fclk);
- clk_disable(sci_port->iclk);
+ /* Cancel the break timer to ensure that the timer handler will not try
+ * to access the hardware with clocks and power disabled. Reset the
+ * break flag to make the break debouncing state machine ready for the
+ * next break.
+ */
+ del_timer_sync(&sci_port->break_timer);
+ sci_port->break_flag = 0;
+
+ clk_disable_unprepare(sci_port->fclk);
+ clk_disable_unprepare(sci_port->iclk);
pm_runtime_put_sync(sci_port->port.dev);
}
@@ -557,7 +565,7 @@
return 1;
/* Cast for ARM damage */
- return !!__raw_readb((void __iomem *)s->cfg->port_reg);
+ return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg);
}
/* ********************************************************************** *
@@ -733,8 +741,6 @@
{
struct sci_port *port = (struct sci_port *)data;
- sci_port_enable(port);
-
if (sci_rxd_in(&port->port) == 0) {
port->break_flag = 1;
sci_schedule_break_timer(port);
@@ -744,8 +750,6 @@
sci_schedule_break_timer(port);
} else
port->break_flag = 0;
-
- sci_port_disable(port);
}
static int sci_handle_errors(struct uart_port *port)
@@ -1309,7 +1313,7 @@
}
if (room < count)
- dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+ dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
count - room);
if (!room)
return room;
@@ -1442,7 +1446,7 @@
int count;
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
- dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
+ dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
sh_desc->partial, sh_desc->cookie);
spin_lock_irqsave(&port->lock, flags);
@@ -1691,16 +1695,17 @@
s->chan_tx = chan;
sg_init_table(&s->sg_tx, 1);
/* UART circular tx buffer is an aligned page. */
- BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+ BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
- UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
+ UART_XMIT_SIZE,
+ (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
if (!nent)
sci_tx_dma_release(s, false);
else
- dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
- sg_dma_len(&s->sg_tx),
- port->state->xmit.buf, sg_dma_address(&s->sg_tx));
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
+ sg_dma_len(&s->sg_tx), port->state->xmit.buf,
+ &sg_dma_address(&s->sg_tx));
s->sg_len_tx = nent;
@@ -1740,7 +1745,7 @@
sg_init_table(sg, 1);
sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
- (int)buf[i] & ~PAGE_MASK);
+ (uintptr_t)buf[i] & ~PAGE_MASK);
sg_dma_address(sg) = dma[i];
}
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 2cb52e0..9f71d9f 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -326,7 +326,7 @@
#if defined(CONFIG_ARCH_AT91SAM9RL)
-#include <mach/at91_pmc.h>
+#include <linux/clk/at91_pmc.h>
static void toggle_bias(int is_on)
{
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index b9fd039..6f7e23d 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -17,7 +17,6 @@
*/
#include <linux/clk.h>
-#include <linux/clk/tegra.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/gpio.h>
@@ -29,6 +28,7 @@
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/usb/ehci_def.h>
#include <linux/usb/tegra_usb_phy.h>
@@ -62,6 +62,7 @@
struct tegra_ehci_hcd {
struct tegra_usb_phy *phy;
struct clk *clk;
+ struct reset_control *rst;
int port_resuming;
bool needs_double_reset;
enum tegra_usb_phy_port_speed port_speed;
@@ -385,13 +386,20 @@
goto cleanup_hcd_create;
}
+ tegra->rst = devm_reset_control_get(&pdev->dev, "usb");
+ if (IS_ERR(tegra->rst)) {
+ dev_err(&pdev->dev, "Can't get ehci reset\n");
+ err = PTR_ERR(tegra->rst);
+ goto cleanup_hcd_create;
+ }
+
err = clk_prepare_enable(tegra->clk);
if (err)
goto cleanup_hcd_create;
- tegra_periph_reset_assert(tegra->clk);
+ reset_control_assert(tegra->rst);
udelay(1);
- tegra_periph_reset_deassert(tegra->clk);
+ reset_control_deassert(tegra->rst);
u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
if (IS_ERR(u_phy)) {
diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h
new file mode 100644
index 0000000..0b4cb99
--- /dev/null
+++ b/include/dt-bindings/clk/at91.h
@@ -0,0 +1,22 @@
+/*
+ * This header provides constants for AT91 pmc status.
+ *
+ * The constants defined in this header are being used in dts.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AT91_H
+#define _DT_BINDINGS_CLK_AT91_H
+
+#define AT91_PMC_MOSCS 0 /* MOSCS Flag */
+#define AT91_PMC_LOCKA 1 /* PLLA Lock */
+#define AT91_PMC_LOCKB 2 /* PLLB Lock */
+#define AT91_PMC_MCKRDY 3 /* Master Clock */
+#define AT91_PMC_LOCKU 6 /* UPLL Lock */
+#define AT91_PMC_PCKRDY(id) (8 + (id)) /* Programmable Clock */
+#define AT91_PMC_MOSCSELS 16 /* Main Oscillator Selection */
+#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
+#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
+
+#endif
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
new file mode 100644
index 0000000..859e9be
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7790_H__
+#define __DT_BINDINGS_CLOCK_R8A7790_H__
+
+/* CPG */
+#define R8A7790_CLK_MAIN 0
+#define R8A7790_CLK_PLL0 1
+#define R8A7790_CLK_PLL1 2
+#define R8A7790_CLK_PLL3 3
+#define R8A7790_CLK_LB 4
+#define R8A7790_CLK_QSPI 5
+#define R8A7790_CLK_SDH 6
+#define R8A7790_CLK_SD0 7
+#define R8A7790_CLK_SD1 8
+#define R8A7790_CLK_Z 9
+
+/* MSTP0 */
+#define R8A7790_CLK_MSIOF0 0
+
+/* MSTP1 */
+#define R8A7790_CLK_TMU1 11
+#define R8A7790_CLK_TMU3 21
+#define R8A7790_CLK_TMU2 22
+#define R8A7790_CLK_CMT0 24
+#define R8A7790_CLK_TMU0 25
+#define R8A7790_CLK_VSP1_DU1 27
+#define R8A7790_CLK_VSP1_DU0 28
+#define R8A7790_CLK_VSP1_RT 30
+#define R8A7790_CLK_VSP1_SY 31
+
+/* MSTP2 */
+#define R8A7790_CLK_SCIFA2 2
+#define R8A7790_CLK_SCIFA1 3
+#define R8A7790_CLK_SCIFA0 4
+#define R8A7790_CLK_MSIOF2 5
+#define R8A7790_CLK_SCIFB0 6
+#define R8A7790_CLK_SCIFB1 7
+#define R8A7790_CLK_MSIOF1 8
+#define R8A7790_CLK_MSIOF3 15
+#define R8A7790_CLK_SCIFB2 16
+#define R8A7790_CLK_SYS_DMAC0 18
+#define R8A7790_CLK_SYS_DMAC1 19
+
+/* MSTP3 */
+#define R8A7790_CLK_TPU0 4
+#define R8A7790_CLK_MMCIF1 5
+#define R8A7790_CLK_SDHI3 11
+#define R8A7790_CLK_SDHI2 12
+#define R8A7790_CLK_SDHI1 13
+#define R8A7790_CLK_SDHI0 14
+#define R8A7790_CLK_MMCIF0 15
+#define R8A7790_CLK_SSUSB 28
+#define R8A7790_CLK_CMT1 29
+#define R8A7790_CLK_USBDMAC0 30
+#define R8A7790_CLK_USBDMAC1 31
+
+/* MSTP5 */
+#define R8A7790_CLK_THERMAL 22
+#define R8A7790_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7790_CLK_EHCI 3
+#define R8A7790_CLK_HSUSB 4
+#define R8A7790_CLK_HSCIF1 16
+#define R8A7790_CLK_HSCIF0 17
+#define R8A7790_CLK_SCIF1 20
+#define R8A7790_CLK_SCIF0 21
+#define R8A7790_CLK_DU2 22
+#define R8A7790_CLK_DU1 23
+#define R8A7790_CLK_DU0 24
+#define R8A7790_CLK_LVDS1 25
+#define R8A7790_CLK_LVDS0 26
+
+/* MSTP8 */
+#define R8A7790_CLK_VIN3 8
+#define R8A7790_CLK_VIN2 9
+#define R8A7790_CLK_VIN1 10
+#define R8A7790_CLK_VIN0 11
+#define R8A7790_CLK_ETHER 13
+#define R8A7790_CLK_SATA1 14
+#define R8A7790_CLK_SATA0 15
+
+/* MSTP9 */
+#define R8A7790_CLK_GPIO5 7
+#define R8A7790_CLK_GPIO4 8
+#define R8A7790_CLK_GPIO3 9
+#define R8A7790_CLK_GPIO2 10
+#define R8A7790_CLK_GPIO1 11
+#define R8A7790_CLK_GPIO0 12
+#define R8A7790_CLK_RCAN1 15
+#define R8A7790_CLK_RCAN0 16
+#define R8A7790_CLK_QSPI_MOD 17
+#define R8A7790_CLK_IICDVFS 26
+#define R8A7790_CLK_I2C3 28
+#define R8A7790_CLK_I2C2 29
+#define R8A7790_CLK_I2C1 30
+#define R8A7790_CLK_I2C0 31
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
new file mode 100644
index 0000000..30f82f2
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7791_H__
+#define __DT_BINDINGS_CLOCK_R8A7791_H__
+
+/* CPG */
+#define R8A7791_CLK_MAIN 0
+#define R8A7791_CLK_PLL0 1
+#define R8A7791_CLK_PLL1 2
+#define R8A7791_CLK_PLL3 3
+#define R8A7791_CLK_LB 4
+#define R8A7791_CLK_QSPI 5
+#define R8A7791_CLK_SDH 6
+#define R8A7791_CLK_SD0 7
+#define R8A7791_CLK_Z 8
+
+/* MSTP0 */
+#define R8A7791_CLK_MSIOF0 0
+
+/* MSTP1 */
+#define R8A7791_CLK_TMU1 11
+#define R8A7791_CLK_TMU3 21
+#define R8A7791_CLK_TMU2 22
+#define R8A7791_CLK_CMT0 24
+#define R8A7791_CLK_TMU0 25
+#define R8A7791_CLK_VSP1_DU1 27
+#define R8A7791_CLK_VSP1_DU0 28
+#define R8A7791_CLK_VSP1_SY 31
+
+/* MSTP2 */
+#define R8A7791_CLK_SCIFA2 2
+#define R8A7791_CLK_SCIFA1 3
+#define R8A7791_CLK_SCIFA0 4
+#define R8A7791_CLK_MSIOF2 5
+#define R8A7791_CLK_SCIFB0 6
+#define R8A7791_CLK_SCIFB1 7
+#define R8A7791_CLK_MSIOF1 8
+#define R8A7791_CLK_SCIFB2 16
+#define R8A7791_CLK_DMAC 18
+
+/* MSTP3 */
+#define R8A7791_CLK_TPU0 4
+#define R8A7791_CLK_SDHI2 11
+#define R8A7791_CLK_SDHI1 12
+#define R8A7791_CLK_SDHI0 14
+#define R8A7791_CLK_MMCIF0 15
+#define R8A7791_CLK_SSUSB 28
+#define R8A7791_CLK_CMT1 29
+#define R8A7791_CLK_USBDMAC0 30
+#define R8A7791_CLK_USBDMAC1 31
+
+/* MSTP5 */
+#define R8A7791_CLK_THERMAL 22
+#define R8A7791_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7791_CLK_HSUSB 4
+#define R8A7791_CLK_HSCIF2 13
+#define R8A7791_CLK_SCIF5 14
+#define R8A7791_CLK_SCIF4 15
+#define R8A7791_CLK_HSCIF1 16
+#define R8A7791_CLK_HSCIF0 17
+#define R8A7791_CLK_SCIF3 18
+#define R8A7791_CLK_SCIF2 19
+#define R8A7791_CLK_SCIF1 20
+#define R8A7791_CLK_SCIF0 21
+#define R8A7791_CLK_DU1 23
+#define R8A7791_CLK_DU0 24
+#define R8A7791_CLK_LVDS0 26
+
+/* MSTP8 */
+#define R8A7791_CLK_VIN2 9
+#define R8A7791_CLK_VIN1 10
+#define R8A7791_CLK_VIN0 11
+#define R8A7791_CLK_ETHER 13
+#define R8A7791_CLK_SATA1 14
+#define R8A7791_CLK_SATA0 15
+
+/* MSTP9 */
+#define R8A7791_CLK_GPIO7 4
+#define R8A7791_CLK_GPIO6 5
+#define R8A7791_CLK_GPIO5 7
+#define R8A7791_CLK_GPIO4 8
+#define R8A7791_CLK_GPIO3 9
+#define R8A7791_CLK_GPIO2 10
+#define R8A7791_CLK_GPIO1 11
+#define R8A7791_CLK_GPIO0 12
+#define R8A7791_CLK_RCAN1 15
+#define R8A7791_CLK_RCAN0 16
+#define R8A7791_CLK_QSPI_MOD 17
+#define R8A7791_CLK_I2C5 25
+#define R8A7791_CLK_IICDVFS 26
+#define R8A7791_CLK_I2C4 27
+#define R8A7791_CLK_I2C3 28
+#define R8A7791_CLK_I2C2 29
+#define R8A7791_CLK_I2C1 30
+#define R8A7791_CLK_I2C0 31
+
+/* MSTP11 */
+#define R8A7791_CLK_SCIFA3 6
+#define R8A7791_CLK_SCIFA4 7
+#define R8A7791_CLK_SCIFA5 8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */
diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h
index 614aec4..6d0d8d8 100644
--- a/include/dt-bindings/clock/tegra114-car.h
+++ b/include/dt-bindings/clock/tegra114-car.h
@@ -37,10 +37,10 @@
#define TEGRA114_CLK_I2S2 18
#define TEGRA114_CLK_EPP 19
/* 20 (register bit affects vi and vi_sensor) */
-#define TEGRA114_CLK_GR_2D 21
+#define TEGRA114_CLK_GR2D 21
#define TEGRA114_CLK_USBD 22
#define TEGRA114_CLK_ISP 23
-#define TEGRA114_CLK_GR_3D 24
+#define TEGRA114_CLK_GR3D 24
/* 25 */
#define TEGRA114_CLK_DISP2 26
#define TEGRA114_CLK_DISP1 27
@@ -289,8 +289,8 @@
#define TEGRA114_CLK_PCLK 261
#define TEGRA114_CLK_CCLK_G 262
#define TEGRA114_CLK_CCLK_LP 263
-/* 264 */
-/* 265 */
+#define TEGRA114_CLK_DFLL_REF 264
+#define TEGRA114_CLK_DFLL_SOC 265
/* 266 */
/* 267 */
/* 268 */
diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h
new file mode 100644
index 0000000..a1116a3
--- /dev/null
+++ b/include/dt-bindings/clock/tegra124-car.h
@@ -0,0 +1,341 @@
+/*
+ * This header provides constants for binding nvidia,tegra124-car.
+ *
+ * The first 192 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 185 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 185 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA124_CAR_H
+#define _DT_BINDINGS_CLOCK_TEGRA124_CAR_H
+
+/* 0 */
+/* 1 */
+/* 2 */
+#define TEGRA124_CLK_ISPB 3
+#define TEGRA124_CLK_RTC 4
+#define TEGRA124_CLK_TIMER 5
+#define TEGRA124_CLK_UARTA 6
+/* 7 (register bit affects uartb and vfir) */
+/* 8 */
+#define TEGRA124_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA124_CLK_I2S1 11
+#define TEGRA124_CLK_I2C1 12
+#define TEGRA124_CLK_NDFLASH 13
+#define TEGRA124_CLK_SDMMC1 14
+#define TEGRA124_CLK_SDMMC4 15
+/* 16 */
+#define TEGRA124_CLK_PWM 17
+#define TEGRA124_CLK_I2S2 18
+/* 20 (register bit affects vi and vi_sensor) */
+#define TEGRA124_CLK_GR_2D 21
+#define TEGRA124_CLK_USBD 22
+#define TEGRA124_CLK_ISP 23
+#define TEGRA124_CLK_GR_3D 24
+/* 25 */
+#define TEGRA124_CLK_DISP2 26
+#define TEGRA124_CLK_DISP1 27
+#define TEGRA124_CLK_HOST1X 28
+#define TEGRA124_CLK_VCP 29
+#define TEGRA124_CLK_I2S0 30
+/* 31 */
+
+/* 32 */
+/* 33 */
+#define TEGRA124_CLK_APBDMA 34
+/* 35 */
+#define TEGRA124_CLK_KBC 36
+/* 37 */
+/* 38 */
+/* 39 (register bit affects fuse and fuse_burn) */
+#define TEGRA124_CLK_KFUSE 40
+#define TEGRA124_CLK_SBC1 41
+#define TEGRA124_CLK_NOR 42
+/* 43 */
+#define TEGRA124_CLK_SBC2 44
+/* 45 */
+#define TEGRA124_CLK_SBC3 46
+#define TEGRA124_CLK_I2C5 47
+#define TEGRA124_CLK_DSIA 48
+/* 49 */
+#define TEGRA124_CLK_MIPI 50
+#define TEGRA124_CLK_HDMI 51
+#define TEGRA124_CLK_CSI 52
+/* 53 */
+#define TEGRA124_CLK_I2C2 54
+#define TEGRA124_CLK_UARTC 55
+#define TEGRA124_CLK_MIPI_CAL 56
+#define TEGRA124_CLK_EMC 57
+#define TEGRA124_CLK_USB2 58
+#define TEGRA124_CLK_USB3 59
+/* 60 */
+#define TEGRA124_CLK_VDE 61
+#define TEGRA124_CLK_BSEA 62
+#define TEGRA124_CLK_BSEV 63
+
+/* 64 */
+#define TEGRA124_CLK_UARTD 65
+#define TEGRA124_CLK_UARTE 66
+#define TEGRA124_CLK_I2C3 67
+#define TEGRA124_CLK_SBC4 68
+#define TEGRA124_CLK_SDMMC3 69
+#define TEGRA124_CLK_PCIE 70
+#define TEGRA124_CLK_OWR 71
+#define TEGRA124_CLK_AFI 72
+#define TEGRA124_CLK_CSITE 73
+/* 74 */
+/* 75 */
+#define TEGRA124_CLK_LA 76
+#define TEGRA124_CLK_TRACE 77
+#define TEGRA124_CLK_SOC_THERM 78
+#define TEGRA124_CLK_DTV 79
+#define TEGRA124_CLK_NDSPEED 80
+#define TEGRA124_CLK_I2CSLOW 81
+#define TEGRA124_CLK_DSIB 82
+#define TEGRA124_CLK_TSEC 83
+/* 84 */
+/* 85 */
+/* 86 */
+/* 87 */
+/* 88 */
+#define TEGRA124_CLK_XUSB_HOST 89
+/* 90 */
+#define TEGRA124_CLK_MSENC 91
+#define TEGRA124_CLK_CSUS 92
+/* 93 */
+/* 94 */
+/* 95 (bit affects xusb_dev and xusb_dev_src) */
+
+/* 96 */
+/* 97 */
+/* 98 */
+#define TEGRA124_CLK_MSELECT 99
+#define TEGRA124_CLK_TSENSOR 100
+#define TEGRA124_CLK_I2S3 101
+#define TEGRA124_CLK_I2S4 102
+#define TEGRA124_CLK_I2C4 103
+#define TEGRA124_CLK_SBC5 104
+#define TEGRA124_CLK_SBC6 105
+#define TEGRA124_CLK_D_AUDIO 106
+#define TEGRA124_CLK_APBIF 107
+#define TEGRA124_CLK_DAM0 108
+#define TEGRA124_CLK_DAM1 109
+#define TEGRA124_CLK_DAM2 110
+#define TEGRA124_CLK_HDA2CODEC_2X 111
+/* 112 */
+#define TEGRA124_CLK_AUDIO0_2X 113
+#define TEGRA124_CLK_AUDIO1_2X 114
+#define TEGRA124_CLK_AUDIO2_2X 115
+#define TEGRA124_CLK_AUDIO3_2X 116
+#define TEGRA124_CLK_AUDIO4_2X 117
+#define TEGRA124_CLK_SPDIF_2X 118
+#define TEGRA124_CLK_ACTMON 119
+#define TEGRA124_CLK_EXTERN1 120
+#define TEGRA124_CLK_EXTERN2 121
+#define TEGRA124_CLK_EXTERN3 122
+#define TEGRA124_CLK_SATA_OOB 123
+#define TEGRA124_CLK_SATA 124
+#define TEGRA124_CLK_HDA 125
+/* 126 */
+#define TEGRA124_CLK_SE 127
+
+#define TEGRA124_CLK_HDA2HDMI 128
+#define TEGRA124_CLK_SATA_COLD 129
+/* 130 */
+/* 131 */
+/* 132 */
+/* 133 */
+/* 134 */
+/* 135 */
+/* 136 */
+/* 137 */
+/* 138 */
+/* 139 */
+/* 140 */
+/* 141 */
+/* 142 */
+/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */
+/* xusb_host_src and xusb_ss_src) */
+#define TEGRA124_CLK_CILAB 144
+#define TEGRA124_CLK_CILCD 145
+#define TEGRA124_CLK_CILE 146
+#define TEGRA124_CLK_DSIALP 147
+#define TEGRA124_CLK_DSIBLP 148
+#define TEGRA124_CLK_ENTROPY 149
+#define TEGRA124_CLK_DDS 150
+/* 151 */
+#define TEGRA124_CLK_DP2 152
+#define TEGRA124_CLK_AMX 153
+#define TEGRA124_CLK_ADX 154
+/* 155 (bit affects dfll_ref and dfll_soc) */
+#define TEGRA124_CLK_XUSB_SS 156
+/* 157 */
+/* 158 */
+/* 159 */
+
+/* 160 */
+/* 161 */
+/* 162 */
+/* 163 */
+/* 164 */
+/* 165 */
+#define TEGRA124_CLK_I2C6 166
+/* 167 */
+/* 168 */
+/* 169 */
+/* 170 */
+#define TEGRA124_CLK_VIM2_CLK 171
+/* 172 */
+/* 173 */
+/* 174 */
+/* 175 */
+#define TEGRA124_CLK_HDMI_AUDIO 176
+#define TEGRA124_CLK_CLK72MHZ 177
+#define TEGRA124_CLK_VIC03 178
+/* 179 */
+#define TEGRA124_CLK_ADX1 180
+#define TEGRA124_CLK_DPAUX 181
+#define TEGRA124_CLK_SOR0 182
+/* 183 */
+#define TEGRA124_CLK_GPU 184
+#define TEGRA124_CLK_AMX1 185
+/* 186 */
+/* 187 */
+/* 188 */
+/* 189 */
+/* 190 */
+/* 191 */
+#define TEGRA124_CLK_UARTB 192
+#define TEGRA124_CLK_VFIR 193
+#define TEGRA124_CLK_SPDIF_IN 194
+#define TEGRA124_CLK_SPDIF_OUT 195
+#define TEGRA124_CLK_VI 196
+#define TEGRA124_CLK_VI_SENSOR 197
+#define TEGRA124_CLK_FUSE 198
+#define TEGRA124_CLK_FUSE_BURN 199
+#define TEGRA124_CLK_CLK_32K 200
+#define TEGRA124_CLK_CLK_M 201
+#define TEGRA124_CLK_CLK_M_DIV2 202
+#define TEGRA124_CLK_CLK_M_DIV4 203
+#define TEGRA124_CLK_PLL_REF 204
+#define TEGRA124_CLK_PLL_C 205
+#define TEGRA124_CLK_PLL_C_OUT1 206
+#define TEGRA124_CLK_PLL_C2 207
+#define TEGRA124_CLK_PLL_C3 208
+#define TEGRA124_CLK_PLL_M 209
+#define TEGRA124_CLK_PLL_M_OUT1 210
+#define TEGRA124_CLK_PLL_P 211
+#define TEGRA124_CLK_PLL_P_OUT1 212
+#define TEGRA124_CLK_PLL_P_OUT2 213
+#define TEGRA124_CLK_PLL_P_OUT3 214
+#define TEGRA124_CLK_PLL_P_OUT4 215
+#define TEGRA124_CLK_PLL_A 216
+#define TEGRA124_CLK_PLL_A_OUT0 217
+#define TEGRA124_CLK_PLL_D 218
+#define TEGRA124_CLK_PLL_D_OUT0 219
+#define TEGRA124_CLK_PLL_D2 220
+#define TEGRA124_CLK_PLL_D2_OUT0 221
+#define TEGRA124_CLK_PLL_U 222
+#define TEGRA124_CLK_PLL_U_480M 223
+
+#define TEGRA124_CLK_PLL_U_60M 224
+#define TEGRA124_CLK_PLL_U_48M 225
+#define TEGRA124_CLK_PLL_U_12M 226
+#define TEGRA124_CLK_PLL_X 227
+#define TEGRA124_CLK_PLL_X_OUT0 228
+#define TEGRA124_CLK_PLL_RE_VCO 229
+#define TEGRA124_CLK_PLL_RE_OUT 230
+#define TEGRA124_CLK_PLL_E 231
+#define TEGRA124_CLK_SPDIF_IN_SYNC 232
+#define TEGRA124_CLK_I2S0_SYNC 233
+#define TEGRA124_CLK_I2S1_SYNC 234
+#define TEGRA124_CLK_I2S2_SYNC 235
+#define TEGRA124_CLK_I2S3_SYNC 236
+#define TEGRA124_CLK_I2S4_SYNC 237
+#define TEGRA124_CLK_VIMCLK_SYNC 238
+#define TEGRA124_CLK_AUDIO0 239
+#define TEGRA124_CLK_AUDIO1 240
+#define TEGRA124_CLK_AUDIO2 241
+#define TEGRA124_CLK_AUDIO3 242
+#define TEGRA124_CLK_AUDIO4 243
+#define TEGRA124_CLK_SPDIF 244
+#define TEGRA124_CLK_CLK_OUT_1 245
+#define TEGRA124_CLK_CLK_OUT_2 246
+#define TEGRA124_CLK_CLK_OUT_3 247
+#define TEGRA124_CLK_BLINK 248
+/* 249 */
+/* 250 */
+/* 251 */
+#define TEGRA124_CLK_XUSB_HOST_SRC 252
+#define TEGRA124_CLK_XUSB_FALCON_SRC 253
+#define TEGRA124_CLK_XUSB_FS_SRC 254
+#define TEGRA124_CLK_XUSB_SS_SRC 255
+
+#define TEGRA124_CLK_XUSB_DEV_SRC 256
+#define TEGRA124_CLK_XUSB_DEV 257
+#define TEGRA124_CLK_XUSB_HS_SRC 258
+#define TEGRA124_CLK_SCLK 259
+#define TEGRA124_CLK_HCLK 260
+#define TEGRA124_CLK_PCLK 261
+#define TEGRA124_CLK_CCLK_G 262
+#define TEGRA124_CLK_CCLK_LP 263
+#define TEGRA124_CLK_DFLL_REF 264
+#define TEGRA124_CLK_DFLL_SOC 265
+#define TEGRA124_CLK_VI_SENSOR2 266
+#define TEGRA124_CLK_PLL_P_OUT5 267
+#define TEGRA124_CLK_CML0 268
+#define TEGRA124_CLK_CML1 269
+#define TEGRA124_CLK_PLL_C4 270
+#define TEGRA124_CLK_PLL_DP 271
+#define TEGRA124_CLK_PLL_E_MUX 272
+/* 273 */
+/* 274 */
+/* 275 */
+/* 276 */
+/* 277 */
+/* 278 */
+/* 279 */
+/* 280 */
+/* 281 */
+/* 282 */
+/* 283 */
+/* 284 */
+/* 285 */
+/* 286 */
+/* 287 */
+
+/* 288 */
+/* 289 */
+/* 290 */
+/* 291 */
+/* 292 */
+/* 293 */
+/* 294 */
+/* 295 */
+/* 296 */
+/* 297 */
+/* 298 */
+/* 299 */
+#define TEGRA124_CLK_AUDIO0_MUX 300
+#define TEGRA124_CLK_AUDIO1_MUX 301
+#define TEGRA124_CLK_AUDIO2_MUX 302
+#define TEGRA124_CLK_AUDIO3_MUX 303
+#define TEGRA124_CLK_AUDIO4_MUX 304
+#define TEGRA124_CLK_SPDIF_MUX 305
+#define TEGRA124_CLK_CLK_OUT_1_MUX 306
+#define TEGRA124_CLK_CLK_OUT_2_MUX 307
+#define TEGRA124_CLK_CLK_OUT_3_MUX 308
+#define TEGRA124_CLK_DSIA_MUX 309
+#define TEGRA124_CLK_DSIB_MUX 310
+#define TEGRA124_CLK_SOR0_LVDS 311
+#define TEGRA124_CLK_CLK_MAX 312
+
+#endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */
diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h
index a1ae9a8..9406207 100644
--- a/include/dt-bindings/clock/tegra20-car.h
+++ b/include/dt-bindings/clock/tegra20-car.h
@@ -92,7 +92,7 @@
#define TEGRA20_CLK_OWR 71
#define TEGRA20_CLK_AFI 72
#define TEGRA20_CLK_CSITE 73
-#define TEGRA20_CLK_PCIE_XCLK 74
+/* 74 */
#define TEGRA20_CLK_AVPUCQ 75
#define TEGRA20_CLK_LA 76
/* 77 */
diff --git a/include/dt-bindings/clock/tegra30-car.h b/include/dt-bindings/clock/tegra30-car.h
index e40fae8..889e49b 100644
--- a/include/dt-bindings/clock/tegra30-car.h
+++ b/include/dt-bindings/clock/tegra30-car.h
@@ -92,7 +92,7 @@
#define TEGRA30_CLK_OWR 71
#define TEGRA30_CLK_AFI 72
#define TEGRA30_CLK_CSITE 73
-#define TEGRA30_CLK_PCIEX 74
+/* 74 */
#define TEGRA30_CLK_AVPUCQ 75
#define TEGRA30_CLK_LA 76
/* 77 */
@@ -260,6 +260,14 @@
/* 298 */
/* 299 */
#define TEGRA30_CLK_CLK_OUT_1_MUX 300
-#define TEGRA30_CLK_CLK_MAX 301
+#define TEGRA30_CLK_CLK_OUT_2_MUX 301
+#define TEGRA30_CLK_CLK_OUT_3_MUX 302
+#define TEGRA30_CLK_AUDIO0_MUX 303
+#define TEGRA30_CLK_AUDIO1_MUX 304
+#define TEGRA30_CLK_AUDIO2_MUX 305
+#define TEGRA30_CLK_AUDIO3_MUX 306
+#define TEGRA30_CLK_AUDIO4_MUX 307
+#define TEGRA30_CLK_SPDIF_MUX 308
+#define TEGRA30_CLK_CLK_MAX 309
#endif /* _DT_BINDINGS_CLOCK_TEGRA30_CAR_H */
diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h
index 4d179c0..197dc28 100644
--- a/include/dt-bindings/gpio/tegra-gpio.h
+++ b/include/dt-bindings/gpio/tegra-gpio.h
@@ -43,6 +43,7 @@
#define TEGRA_GPIO_BANK_ID_CC 28
#define TEGRA_GPIO_BANK_ID_DD 29
#define TEGRA_GPIO_BANK_ID_EE 30
+#define TEGRA_GPIO_BANK_ID_FF 31
#define TEGRA_GPIO(bank, offset) \
((TEGRA_GPIO_BANK_ID_##bank * 8) + offset)
diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra.h b/include/dt-bindings/pinctrl/pinctrl-tegra.h
new file mode 100644
index 0000000..ebafa49
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-tegra.h
@@ -0,0 +1,45 @@
+/*
+ * This header provides constants for Tegra pinctrl bindings.
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_H
+
+/*
+ * Enable/disable for diffeent dt properties. This is applicable for
+ * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain,
+ * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt.
+ */
+#define TEGRA_PIN_DISABLE 0
+#define TEGRA_PIN_ENABLE 1
+
+#define TEGRA_PIN_PULL_NONE 0
+#define TEGRA_PIN_PULL_DOWN 1
+#define TEGRA_PIN_PULL_UP 2
+
+/* Low power mode driver */
+#define TEGRA_PIN_LP_DRIVE_DIV_8 0
+#define TEGRA_PIN_LP_DRIVE_DIV_4 1
+#define TEGRA_PIN_LP_DRIVE_DIV_2 2
+#define TEGRA_PIN_LP_DRIVE_DIV_1 3
+
+/* Rising/Falling slew rate */
+#define TEGRA_PIN_SLEW_RATE_FASTEST 0
+#define TEGRA_PIN_SLEW_RATE_FAST 1
+#define TEGRA_PIN_SLEW_RATE_SLOW 2
+#define TEGRA_PIN_SLEW_RATE_SLOWEST 3
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/include/linux/clk/at91_pmc.h
similarity index 98%
rename from arch/arm/mach-at91/include/mach/at91_pmc.h
rename to include/linux/clk/at91_pmc.h
index c604cc6..a6911eb 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/include/linux/clk/at91_pmc.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91/include/mach/at91_pmc.h
+ * include/linux/clk/at91_pmc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
@@ -164,6 +164,8 @@
#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */
#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */
+#define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */
+
#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */
#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */
#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */
diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h
new file mode 100644
index 0000000..f9bf080
--- /dev/null
+++ b/include/linux/clk/shmobile.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_CLK_SHMOBILE_H_
+#define __LINUX_CLK_SHMOBILE_H_
+
+#include <linux/types.h>
+
+void rcar_gen2_clocks_init(u32 mode);
+
+#endif
diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h
index 23a0cee..3ca9fca 100644
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
@@ -120,13 +120,6 @@
}
#endif
-#ifdef CONFIG_ARCH_TEGRA
-void tegra_periph_reset_deassert(struct clk *c);
-void tegra_periph_reset_assert(struct clk *c);
-#else
-static inline void tegra_periph_reset_deassert(struct clk *c) {}
-static inline void tegra_periph_reset_assert(struct clk *c) {}
-#endif
void tegra_clocks_apply_init_table(void);
#endif /* __LINUX_CLK_TEGRA_H_ */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 41cf0c3..bae1568 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -22,6 +22,7 @@
#define LINUX_DMAENGINE_H
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/uio.h>
#include <linux/bug.h>
#include <linux/scatterlist.h>
@@ -1040,6 +1041,8 @@
void dma_issue_pending_all(void);
struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask,
dma_filter_fn fn, void *fn_param);
+struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
+ const char *name);
struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);
void dma_release_channel(struct dma_chan *chan);
#else
@@ -1063,6 +1066,11 @@
{
return NULL;
}
+static inline struct dma_chan *dma_request_slave_channel_reason(
+ struct device *dev, const char *name)
+{
+ return ERR_PTR(-ENODEV);
+}
static inline struct dma_chan *dma_request_slave_channel(struct device *dev,
const char *name)
{
@@ -1079,6 +1087,7 @@
void dma_async_device_unregister(struct dma_device *device);
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
+struct dma_chan *dma_get_any_slave_channel(struct dma_device *device);
struct dma_chan *net_dma_find_channel(void);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
#define dma_request_slave_channel_compat(mask, x, y, dev, name) \
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index fb90ef5..282309d 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -82,8 +82,10 @@
* operation, if several modes of operation are supported these can be
* passed in the argument on a custom form, else just use argument 1
* to indicate low power mode, argument 0 turns low power mode off.
- * @PIN_CONFIG_OUTPUT: this will configure the pin in output, use argument
- * 1 to indicate high level, argument 0 to indicate low level.
+ * @PIN_CONFIG_OUTPUT: this will configure the pin as an output. Use argument
+ * 1 to indicate high level, argument 0 to indicate low level. (Please
+ * see Documentation/pinctrl.txt, section "GPIO mode pitfalls" for a
+ * discussion around this parameter.)
* @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
* you need to pass in custom configurations to the pin controller, use
* PIN_CONFIG_END+1 as the base offset.
diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h
deleted file mode 100644
index 8008897..0000000
--- a/include/linux/platform_data/clocksource-nomadik-mtu.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __PLAT_MTU_H
-#define __PLAT_MTU_H
-
-void nmdk_timer_init(void __iomem *base, int irq);
-void nmdk_clkevt_reset(void);
-void nmdk_clksrc_reset(void);
-
-#endif /* __PLAT_MTU_H */
-
diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h
deleted file mode 100644
index abf5bed..0000000
--- a/include/linux/platform_data/pinctrl-nomadik.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * pin configurations are represented by 32-bit integers:
- *
- * bit 0.. 8 - Pin Number (512 Pins Maximum)
- * bit 9..10 - Alternate Function Selection
- * bit 11..12 - Pull up/down state
- * bit 13 - Sleep mode behaviour
- * bit 14 - Direction
- * bit 15 - Value (if output)
- * bit 16..18 - SLPM pull up/down state
- * bit 19..20 - SLPM direction
- * bit 21..22 - SLPM Value (if output)
- * bit 23..25 - PDIS value (if input)
- * bit 26 - Gpio mode
- * bit 27 - Sleep mode
- *
- * to facilitate the definition, the following macros are provided
- *
- * PIN_CFG_DEFAULT - default config (0):
- * pull up/down = disabled
- * sleep mode = input/wakeup
- * direction = input
- * value = low
- * SLPM direction = same as normal
- * SLPM pull = same as normal
- * SLPM value = same as normal
- *
- * PIN_CFG - default config with alternate function
- */
-
-typedef unsigned long pin_cfg_t;
-
-#define PIN_NUM_MASK 0x1ff
-#define PIN_NUM(x) ((x) & PIN_NUM_MASK)
-
-#define PIN_ALT_SHIFT 9
-#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
-#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
-#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
-#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
-#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
-#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
-
-#define PIN_PULL_SHIFT 11
-#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
-#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
-#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
-#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
-#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
-
-#define PIN_SLPM_SHIFT 13
-#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
-#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
-#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
-/* These two replace the above in DB8500v2+ */
-#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
-
-#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
-#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
-
-#define PIN_DIR_SHIFT 14
-#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
-#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
-#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
-#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
-
-#define PIN_VAL_SHIFT 15
-#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
-#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
-#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
-#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
-
-#define PIN_SLPM_PULL_SHIFT 16
-#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL(x) \
- (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_NONE \
- ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_UP \
- ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_DOWN \
- ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
-
-#define PIN_SLPM_DIR_SHIFT 19
-#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR(x) \
- (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
-
-#define PIN_SLPM_VAL_SHIFT 21
-#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL(x) \
- (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
-
-#define PIN_SLPM_PDIS_SHIFT 23
-#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS(x) \
- (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT)
-#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT)
-
-#define PIN_LOWEMI_SHIFT 25
-#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT)
-#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT)
-
-#define PIN_GPIOMODE_SHIFT 26
-#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT)
-#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT)
-
-#define PIN_SLEEPMODE_SHIFT 27
-#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT)
-#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT)
-
-
-/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
-#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
-#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
-#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
-#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
-#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-
-#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
-#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
-#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
-#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
-#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-
-#define PIN_CFG_DEFAULT (0)
-
-#define PIN_CFG(num, alt) \
- (PIN_CFG_DEFAULT |\
- (PIN_NUM(num) | PIN_##alt))
-
-#define PIN_CFG_INPUT(num, alt, pull) \
- (PIN_CFG_DEFAULT |\
- (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
-
-#define PIN_CFG_OUTPUT(num, alt, val) \
- (PIN_CFG_DEFAULT |\
- (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-#define GPIO_BLOCK_SHIFT 5
-#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT 0x00
-#define NMK_GPIO_DATS 0x04
-#define NMK_GPIO_DATC 0x08
-#define NMK_GPIO_PDIS 0x0c
-#define NMK_GPIO_DIR 0x10
-#define NMK_GPIO_DIRS 0x14
-#define NMK_GPIO_DIRC 0x18
-#define NMK_GPIO_SLPC 0x1c
-#define NMK_GPIO_AFSLA 0x20
-#define NMK_GPIO_AFSLB 0x24
-#define NMK_GPIO_LOWEMI 0x28
-
-#define NMK_GPIO_RIMSC 0x40
-#define NMK_GPIO_FIMSC 0x44
-#define NMK_GPIO_IS 0x48
-#define NMK_GPIO_IC 0x4c
-#define NMK_GPIO_RWIMSC 0x50
-#define NMK_GPIO_FWIMSC 0x54
-#define NMK_GPIO_WKS 0x58
-/* These appear in DB8540 and later ASICs */
-#define NMK_GPIO_EDGELEVEL 0x5C
-#define NMK_GPIO_LEVEL 0x60
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO 0
-#define NMK_GPIO_ALT_A 1
-#define NMK_GPIO_ALT_B 2
-#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-#define NMK_GPIO_ALT_CX_SHIFT 2
-#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
- NMK_GPIO_PULL_NONE,
- NMK_GPIO_PULL_UP,
- NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
- NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
- NMK_GPIO_SLPM_NOCHANGE,
- NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
- char *name;
- int first_gpio;
- int first_irq;
- int num_gpio;
- u32 (*get_secondary_status)(unsigned int bank);
- void (*set_ioforce)(bool enable);
- bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h
index fd44983..afe442d 100644
--- a/include/linux/tegra-powergate.h
+++ b/include/linux/tegra-powergate.h
@@ -19,6 +19,7 @@
#define _MACH_TEGRA_POWERGATE_H_
struct clk;
+struct reset_control;
#define TEGRA_POWERGATE_CPU 0
#define TEGRA_POWERGATE_3D 1
@@ -52,7 +53,8 @@
int tegra_powergate_remove_clamping(int id);
/* Must be called with clk disabled, and returns with clk enabled */
-int tegra_powergate_sequence_power_up(int id, struct clk *clk);
+int tegra_powergate_sequence_power_up(int id, struct clk *clk,
+ struct reset_control *rst);
#else
static inline int tegra_powergate_is_powered(int id)
{
@@ -74,7 +76,8 @@
return -ENOSYS;
}
-static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk)
+static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk,
+ struct reset_control *rst);
{
return -ENOSYS;
}
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
index 1501731..eb73a3a 100644
--- a/include/sound/dmaengine_pcm.h
+++ b/include/sound/dmaengine_pcm.h
@@ -114,6 +114,10 @@
* @compat_filter_fn: Will be used as the filter function when requesting a
* channel for platforms which do not use devicetree. The filter parameter
* will be the DAI's DMA data.
+ * @dma_dev: If set, request DMA channel on this device rather than the DAI
+ * device.
+ * @chan_names: If set, these custom DMA channel names will be requested at
+ * registration time.
* @pcm_hardware: snd_pcm_hardware struct to be used for the PCM.
* @prealloc_buffer_size: Size of the preallocated audio buffer.
*
@@ -130,6 +134,8 @@
struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_substream *substream);
dma_filter_fn compat_filter_fn;
+ struct device *dma_dev;
+ const char *chan_names[SNDRV_PCM_STREAM_LAST + 1];
const struct snd_pcm_hardware *pcm_hardware;
unsigned int prealloc_buffer_size;
@@ -140,6 +146,10 @@
unsigned int flags);
void snd_dmaengine_pcm_unregister(struct device *dev);
+int devm_snd_dmaengine_pcm_register(struct device *dev,
+ const struct snd_dmaengine_pcm_config *config,
+ unsigned int flags);
+
int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct dma_slave_config *slave_config);
diff --git a/sound/soc/soc-devres.c b/sound/soc/soc-devres.c
index 3449c1e..7ac745d 100644
--- a/sound/soc/soc-devres.c
+++ b/sound/soc/soc-devres.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
static void devm_component_release(struct device *dev, void *res)
{
@@ -84,3 +85,43 @@
return ret;
}
EXPORT_SYMBOL_GPL(devm_snd_soc_register_card);
+
+#ifdef CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM
+
+static void devm_dmaengine_pcm_release(struct device *dev, void *res)
+{
+ snd_dmaengine_pcm_unregister(*(struct device **)res);
+}
+
+/**
+ * devm_snd_dmaengine_pcm_register - resource managed dmaengine PCM registration
+ * @dev: The parent device for the PCM device
+ * @config: Platform specific PCM configuration
+ * @flags: Platform specific quirks
+ *
+ * Register a dmaengine based PCM device with automatic unregistration when the
+ * device is unregistered.
+ */
+int devm_snd_dmaengine_pcm_register(struct device *dev,
+ const struct snd_dmaengine_pcm_config *config, unsigned int flags)
+{
+ struct device **ptr;
+ int ret;
+
+ ptr = devres_alloc(devm_dmaengine_pcm_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ ret = snd_dmaengine_pcm_register(dev, config, flags);
+ if (ret == 0) {
+ *ptr = dev;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_snd_dmaengine_pcm_register);
+
+#endif
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index cbc9c96..7483922 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -137,6 +137,9 @@
hw.buffer_bytes_max = SIZE_MAX;
hw.fifo_size = dma_data->fifo_size;
+ if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
+ hw.info |= SNDRV_PCM_INFO_BATCH;
+
ret = dma_get_slave_caps(chan, &dma_caps);
if (ret == 0) {
if (dma_caps.cmd_pause)
@@ -284,24 +287,67 @@
[SNDRV_PCM_STREAM_CAPTURE] = "rx",
};
-static void dmaengine_pcm_request_chan_of(struct dmaengine_pcm *pcm,
- struct device *dev)
+static int dmaengine_pcm_request_chan_of(struct dmaengine_pcm *pcm,
+ struct device *dev, const struct snd_dmaengine_pcm_config *config)
{
unsigned int i;
+ const char *name;
+ struct dma_chan *chan;
if ((pcm->flags & (SND_DMAENGINE_PCM_FLAG_NO_DT |
SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME)) ||
!dev->of_node)
- return;
+ return 0;
- if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX) {
- pcm->chan[0] = dma_request_slave_channel(dev, "rx-tx");
- pcm->chan[1] = pcm->chan[0];
- } else {
- for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE; i++) {
- pcm->chan[i] = dma_request_slave_channel(dev,
- dmaengine_pcm_dma_channel_names[i]);
+ if (config->dma_dev) {
+ /*
+ * If this warning is seen, it probably means that your Linux
+ * device structure does not match your HW device structure.
+ * It would be best to refactor the Linux device structure to
+ * correctly match the HW structure.
+ */
+ dev_warn(dev, "DMA channels sourced from device %s",
+ dev_name(config->dma_dev));
+ dev = config->dma_dev;
+ }
+
+ for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE;
+ i++) {
+ if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
+ name = "rx-tx";
+ else
+ name = dmaengine_pcm_dma_channel_names[i];
+ if (config->chan_names[i])
+ name = config->chan_names[i];
+ chan = dma_request_slave_channel_reason(dev, name);
+ if (IS_ERR(chan)) {
+ if (PTR_ERR(chan) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ pcm->chan[i] = NULL;
+ } else {
+ pcm->chan[i] = chan;
}
+ if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
+ break;
+ }
+
+ if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
+ pcm->chan[1] = pcm->chan[0];
+
+ return 0;
+}
+
+static void dmaengine_pcm_release_chan(struct dmaengine_pcm *pcm)
+{
+ unsigned int i;
+
+ for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE;
+ i++) {
+ if (!pcm->chan[i])
+ continue;
+ dma_release_channel(pcm->chan[i]);
+ if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
+ break;
}
}
@@ -315,6 +361,7 @@
const struct snd_dmaengine_pcm_config *config, unsigned int flags)
{
struct dmaengine_pcm *pcm;
+ int ret;
pcm = kzalloc(sizeof(*pcm), GFP_KERNEL);
if (!pcm)
@@ -323,14 +370,25 @@
pcm->config = config;
pcm->flags = flags;
- dmaengine_pcm_request_chan_of(pcm, dev);
+ ret = dmaengine_pcm_request_chan_of(pcm, dev, config);
+ if (ret)
+ goto err_free_dma;
if (flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
- return snd_soc_add_platform(dev, &pcm->platform,
+ ret = snd_soc_add_platform(dev, &pcm->platform,
&dmaengine_no_residue_pcm_platform);
else
- return snd_soc_add_platform(dev, &pcm->platform,
+ ret = snd_soc_add_platform(dev, &pcm->platform,
&dmaengine_pcm_platform);
+ if (ret)
+ goto err_free_dma;
+
+ return 0;
+
+err_free_dma:
+ dmaengine_pcm_release_chan(pcm);
+ kfree(pcm);
+ return ret;
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_register);
@@ -345,7 +403,6 @@
{
struct snd_soc_platform *platform;
struct dmaengine_pcm *pcm;
- unsigned int i;
platform = snd_soc_lookup_platform(dev);
if (!platform)
@@ -353,15 +410,8 @@
pcm = soc_platform_to_pcm(platform);
- for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_CAPTURE; i++) {
- if (pcm->chan[i]) {
- dma_release_channel(pcm->chan[i]);
- if (pcm->flags & SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX)
- break;
- }
- }
-
snd_soc_remove_platform(platform);
+ dmaengine_pcm_release_chan(pcm);
kfree(pcm);
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_unregister);
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
index 8fc653c..896292b 100644
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
@@ -1,6 +1,8 @@
config SND_SOC_TEGRA
tristate "SoC Audio for the Tegra System-on-Chip"
depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+ depends on COMMON_CLK
+ depends on RESET_CONTROLLER
select REGMAP_MMIO
select SND_SOC_GENERIC_DMAENGINE_PCM
help
diff --git a/sound/soc/tegra/tegra20_ac97.c b/sound/soc/tegra/tegra20_ac97.c
index ae27bcd..d8b98d7 100644
--- a/sound/soc/tegra/tegra20_ac97.c
+++ b/sound/soc/tegra/tegra20_ac97.c
@@ -313,7 +313,6 @@
{
struct tegra20_ac97 *ac97;
struct resource *mem;
- u32 of_dma[2];
void __iomem *regs;
int ret = 0;
@@ -348,14 +347,6 @@
goto err_clk_put;
}
- if (of_property_read_u32_array(pdev->dev.of_node,
- "nvidia,dma-request-selector",
- of_dma, 2) < 0) {
- dev_err(&pdev->dev, "No DMA resource\n");
- ret = -ENODEV;
- goto err_clk_put;
- }
-
ac97->reset_gpio = of_get_named_gpio(pdev->dev.of_node,
"nvidia,codec-reset-gpio", 0);
if (gpio_is_valid(ac97->reset_gpio)) {
@@ -380,12 +371,10 @@
ac97->capture_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_RX1;
ac97->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
ac97->capture_dma_data.maxburst = 4;
- ac97->capture_dma_data.slave_id = of_dma[1];
ac97->playback_dma_data.addr = mem->start + TEGRA20_AC97_FIFO_TX1;
ac97->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
ac97->playback_dma_data.maxburst = 4;
- ac97->playback_dma_data.slave_id = of_dma[1];
ret = tegra_asoc_utils_init(&ac97->util_data, &pdev->dev);
if (ret)
diff --git a/sound/soc/tegra/tegra20_i2s.c b/sound/soc/tegra/tegra20_i2s.c
index 364bf6a9..1dc869c 100644
--- a/sound/soc/tegra/tegra20_i2s.c
+++ b/sound/soc/tegra/tegra20_i2s.c
@@ -339,9 +339,7 @@
static int tegra20_i2s_platform_probe(struct platform_device *pdev)
{
struct tegra20_i2s *i2s;
- struct resource *mem, *memregion, *dmareq;
- u32 of_dma[2];
- u32 dma_ch;
+ struct resource *mem, *memregion;
void __iomem *regs;
int ret;
@@ -370,20 +368,6 @@
goto err_clk_put;
}
- dmareq = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!dmareq) {
- if (of_property_read_u32_array(pdev->dev.of_node,
- "nvidia,dma-request-selector",
- of_dma, 2) < 0) {
- dev_err(&pdev->dev, "No DMA resource\n");
- ret = -ENODEV;
- goto err_clk_put;
- }
- dma_ch = of_dma[1];
- } else {
- dma_ch = dmareq->start;
- }
-
memregion = devm_request_mem_region(&pdev->dev, mem->start,
resource_size(mem), DRV_NAME);
if (!memregion) {
@@ -410,12 +394,10 @@
i2s->capture_dma_data.addr = mem->start + TEGRA20_I2S_FIFO2;
i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
i2s->capture_dma_data.maxburst = 4;
- i2s->capture_dma_data.slave_id = dma_ch;
i2s->playback_dma_data.addr = mem->start + TEGRA20_I2S_FIFO1;
i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
i2s->playback_dma_data.maxburst = 4;
- i2s->playback_dma_data.slave_id = dma_ch;
pm_runtime_enable(&pdev->dev);
if (!pm_runtime_enabled(&pdev->dev)) {
diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
index 3115433..d6f4c99 100644
--- a/sound/soc/tegra/tegra30_ahub.c
+++ b/sound/soc/tegra/tegra30_ahub.c
@@ -24,8 +24,8 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <linux/slab.h>
-#include <linux/clk/tegra.h>
#include <sound/soc.h>
#include "tegra30_ahub.h"
@@ -95,8 +95,8 @@
}
int tegra30_ahub_allocate_rx_fifo(enum tegra30_ahub_rxcif *rxcif,
- dma_addr_t *fiforeg,
- unsigned int *reqsel)
+ char *dmachan, int dmachan_len,
+ dma_addr_t *fiforeg)
{
int channel;
u32 reg, val;
@@ -110,9 +110,11 @@
__set_bit(channel, ahub->rx_usage);
*rxcif = TEGRA30_AHUB_RXCIF_APBIF_RX0 + channel;
+ snprintf(dmachan, dmachan_len, "rx%d", channel);
*fiforeg = ahub->apbif_addr + TEGRA30_AHUB_CHANNEL_RXFIFO +
(channel * TEGRA30_AHUB_CHANNEL_RXFIFO_STRIDE);
- *reqsel = ahub->dma_sel + channel;
+
+ pm_runtime_get_sync(ahub->dev);
reg = TEGRA30_AHUB_CHANNEL_CTRL +
(channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
@@ -140,6 +142,8 @@
(channel * TEGRA30_AHUB_CIF_RX_CTRL_STRIDE);
ahub->soc_data->set_audio_cif(ahub->regmap_apbif, reg, &cif_conf);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_allocate_rx_fifo);
@@ -149,12 +153,16 @@
int channel = rxcif - TEGRA30_AHUB_RXCIF_APBIF_RX0;
int reg, val;
+ pm_runtime_get_sync(ahub->dev);
+
reg = TEGRA30_AHUB_CHANNEL_CTRL +
(channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
val = tegra30_apbif_read(reg);
val |= TEGRA30_AHUB_CHANNEL_CTRL_RX_EN;
tegra30_apbif_write(reg, val);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_enable_rx_fifo);
@@ -164,12 +172,16 @@
int channel = rxcif - TEGRA30_AHUB_RXCIF_APBIF_RX0;
int reg, val;
+ pm_runtime_get_sync(ahub->dev);
+
reg = TEGRA30_AHUB_CHANNEL_CTRL +
(channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
val = tegra30_apbif_read(reg);
val &= ~TEGRA30_AHUB_CHANNEL_CTRL_RX_EN;
tegra30_apbif_write(reg, val);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_disable_rx_fifo);
@@ -185,8 +197,8 @@
EXPORT_SYMBOL_GPL(tegra30_ahub_free_rx_fifo);
int tegra30_ahub_allocate_tx_fifo(enum tegra30_ahub_txcif *txcif,
- dma_addr_t *fiforeg,
- unsigned int *reqsel)
+ char *dmachan, int dmachan_len,
+ dma_addr_t *fiforeg)
{
int channel;
u32 reg, val;
@@ -200,9 +212,11 @@
__set_bit(channel, ahub->tx_usage);
*txcif = TEGRA30_AHUB_TXCIF_APBIF_TX0 + channel;
+ snprintf(dmachan, dmachan_len, "tx%d", channel);
*fiforeg = ahub->apbif_addr + TEGRA30_AHUB_CHANNEL_TXFIFO +
(channel * TEGRA30_AHUB_CHANNEL_TXFIFO_STRIDE);
- *reqsel = ahub->dma_sel + channel;
+
+ pm_runtime_get_sync(ahub->dev);
reg = TEGRA30_AHUB_CHANNEL_CTRL +
(channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
@@ -230,6 +244,8 @@
(channel * TEGRA30_AHUB_CIF_TX_CTRL_STRIDE);
ahub->soc_data->set_audio_cif(ahub->regmap_apbif, reg, &cif_conf);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_allocate_tx_fifo);
@@ -239,12 +255,16 @@
int channel = txcif - TEGRA30_AHUB_TXCIF_APBIF_TX0;
int reg, val;
+ pm_runtime_get_sync(ahub->dev);
+
reg = TEGRA30_AHUB_CHANNEL_CTRL +
(channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
val = tegra30_apbif_read(reg);
val |= TEGRA30_AHUB_CHANNEL_CTRL_TX_EN;
tegra30_apbif_write(reg, val);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_enable_tx_fifo);
@@ -254,12 +274,16 @@
int channel = txcif - TEGRA30_AHUB_TXCIF_APBIF_TX0;
int reg, val;
+ pm_runtime_get_sync(ahub->dev);
+
reg = TEGRA30_AHUB_CHANNEL_CTRL +
(channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
val = tegra30_apbif_read(reg);
val &= ~TEGRA30_AHUB_CHANNEL_CTRL_TX_EN;
tegra30_apbif_write(reg, val);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_disable_tx_fifo);
@@ -280,10 +304,14 @@
int channel = rxcif - TEGRA30_AHUB_RXCIF_APBIF_RX0;
int reg;
+ pm_runtime_get_sync(ahub->dev);
+
reg = TEGRA30_AHUB_AUDIO_RX +
(channel * TEGRA30_AHUB_AUDIO_RX_STRIDE);
tegra30_audio_write(reg, 1 << txcif);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_set_rx_cif_source);
@@ -293,35 +321,51 @@
int channel = rxcif - TEGRA30_AHUB_RXCIF_APBIF_RX0;
int reg;
+ pm_runtime_get_sync(ahub->dev);
+
reg = TEGRA30_AHUB_AUDIO_RX +
(channel * TEGRA30_AHUB_AUDIO_RX_STRIDE);
tegra30_audio_write(reg, 0);
+ pm_runtime_put(ahub->dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(tegra30_ahub_unset_rx_cif_source);
-#define CLK_LIST_MASK_TEGRA30 BIT(0)
-#define CLK_LIST_MASK_TEGRA114 BIT(1)
+#define MOD_LIST_MASK_TEGRA30 BIT(0)
+#define MOD_LIST_MASK_TEGRA114 BIT(1)
+#define MOD_LIST_MASK_TEGRA124 BIT(2)
-#define CLK_LIST_MASK_TEGRA30_OR_LATER \
- (CLK_LIST_MASK_TEGRA30 | CLK_LIST_MASK_TEGRA114)
+#define MOD_LIST_MASK_TEGRA30_OR_LATER \
+ (MOD_LIST_MASK_TEGRA30 | MOD_LIST_MASK_TEGRA114 | \
+ MOD_LIST_MASK_TEGRA124)
+#define MOD_LIST_MASK_TEGRA114_OR_LATER \
+ (MOD_LIST_MASK_TEGRA114 | MOD_LIST_MASK_TEGRA124)
static const struct {
- const char *clk_name;
- u32 clk_list_mask;
-} configlink_clocks[] = {
- { "i2s0", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "i2s1", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "i2s2", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "i2s3", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "i2s4", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "dam0", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "dam1", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "dam2", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "spdif_in", CLK_LIST_MASK_TEGRA30_OR_LATER },
- { "amx", CLK_LIST_MASK_TEGRA114 },
- { "adx", CLK_LIST_MASK_TEGRA114 },
+ const char *rst_name;
+ u32 mod_list_mask;
+} configlink_mods[] = {
+ { "i2s0", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "i2s1", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "i2s2", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "i2s3", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "i2s4", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "dam0", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "dam1", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "dam2", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "spdif", MOD_LIST_MASK_TEGRA30_OR_LATER },
+ { "amx", MOD_LIST_MASK_TEGRA114_OR_LATER },
+ { "adx", MOD_LIST_MASK_TEGRA114_OR_LATER },
+ { "amx1", MOD_LIST_MASK_TEGRA124 },
+ { "adx1", MOD_LIST_MASK_TEGRA124 },
+ { "afc0", MOD_LIST_MASK_TEGRA124 },
+ { "afc1", MOD_LIST_MASK_TEGRA124 },
+ { "afc2", MOD_LIST_MASK_TEGRA124 },
+ { "afc3", MOD_LIST_MASK_TEGRA124 },
+ { "afc4", MOD_LIST_MASK_TEGRA124 },
+ { "afc5", MOD_LIST_MASK_TEGRA124 },
};
#define LAST_REG(name) \
@@ -450,17 +494,17 @@
};
static struct tegra30_ahub_soc_data soc_data_tegra30 = {
- .clk_list_mask = CLK_LIST_MASK_TEGRA30,
+ .mod_list_mask = MOD_LIST_MASK_TEGRA30,
.set_audio_cif = tegra30_ahub_set_cif,
};
static struct tegra30_ahub_soc_data soc_data_tegra114 = {
- .clk_list_mask = CLK_LIST_MASK_TEGRA114,
+ .mod_list_mask = MOD_LIST_MASK_TEGRA114,
.set_audio_cif = tegra30_ahub_set_cif,
};
static struct tegra30_ahub_soc_data soc_data_tegra124 = {
- .clk_list_mask = CLK_LIST_MASK_TEGRA114,
+ .mod_list_mask = MOD_LIST_MASK_TEGRA124,
.set_audio_cif = tegra124_ahub_set_cif,
};
@@ -475,10 +519,9 @@
{
const struct of_device_id *match;
const struct tegra30_ahub_soc_data *soc_data;
- struct clk *clk;
+ struct reset_control *rst;
int i;
struct resource *res0, *res1, *region;
- u32 of_dma[2];
void __iomem *regs_apbif, *regs_ahub;
int ret = 0;
@@ -495,19 +538,24 @@
* operate correctly, all devices on this bus must be out of reset.
* Ensure that here.
*/
- for (i = 0; i < ARRAY_SIZE(configlink_clocks); i++) {
- if (!(configlink_clocks[i].clk_list_mask &
- soc_data->clk_list_mask))
+ for (i = 0; i < ARRAY_SIZE(configlink_mods); i++) {
+ if (!(configlink_mods[i].mod_list_mask &
+ soc_data->mod_list_mask))
continue;
- clk = clk_get(&pdev->dev, configlink_clocks[i].clk_name);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "Can't get clock %s\n",
- configlink_clocks[i].clk_name);
- ret = PTR_ERR(clk);
+
+ rst = reset_control_get(&pdev->dev,
+ configlink_mods[i].rst_name);
+ if (IS_ERR(rst)) {
+ dev_err(&pdev->dev, "Can't get reset %s\n",
+ configlink_mods[i].rst_name);
+ ret = PTR_ERR(rst);
goto err;
}
- tegra_periph_reset_deassert(clk);
- clk_put(clk);
+
+ ret = reset_control_deassert(rst);
+ reset_control_put(rst);
+ if (ret)
+ goto err;
}
ahub = devm_kzalloc(&pdev->dev, sizeof(struct tegra30_ahub),
@@ -536,16 +584,6 @@
goto err_clk_put_d_audio;
}
- if (of_property_read_u32_array(pdev->dev.of_node,
- "nvidia,dma-request-selector",
- of_dma, 2) < 0) {
- dev_err(&pdev->dev,
- "Missing property nvidia,dma-request-selector\n");
- ret = -ENODEV;
- goto err_clk_put_d_audio;
- }
- ahub->dma_sel = of_dma[1];
-
res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res0) {
dev_err(&pdev->dev, "No apbif memory resource\n");
diff --git a/sound/soc/tegra/tegra30_ahub.h b/sound/soc/tegra/tegra30_ahub.h
index d67321d..fd7ba75 100644
--- a/sound/soc/tegra/tegra30_ahub.h
+++ b/sound/soc/tegra/tegra30_ahub.h
@@ -465,15 +465,15 @@
};
extern int tegra30_ahub_allocate_rx_fifo(enum tegra30_ahub_rxcif *rxcif,
- dma_addr_t *fiforeg,
- unsigned int *reqsel);
+ char *dmachan, int dmachan_len,
+ dma_addr_t *fiforeg);
extern int tegra30_ahub_enable_rx_fifo(enum tegra30_ahub_rxcif rxcif);
extern int tegra30_ahub_disable_rx_fifo(enum tegra30_ahub_rxcif rxcif);
extern int tegra30_ahub_free_rx_fifo(enum tegra30_ahub_rxcif rxcif);
extern int tegra30_ahub_allocate_tx_fifo(enum tegra30_ahub_txcif *txcif,
- dma_addr_t *fiforeg,
- unsigned int *reqsel);
+ char *dmachan, int dmachan_len,
+ dma_addr_t *fiforeg);
extern int tegra30_ahub_enable_tx_fifo(enum tegra30_ahub_txcif txcif);
extern int tegra30_ahub_disable_tx_fifo(enum tegra30_ahub_txcif txcif);
extern int tegra30_ahub_free_tx_fifo(enum tegra30_ahub_txcif txcif);
@@ -502,7 +502,7 @@
struct tegra30_ahub_cif_conf *conf);
struct tegra30_ahub_soc_data {
- u32 clk_list_mask;
+ u32 mod_list_mask;
void (*set_audio_cif)(struct regmap *regmap,
unsigned int reg,
struct tegra30_ahub_cif_conf *conf);
@@ -524,7 +524,6 @@
struct device *dev;
struct clk *clk_d_audio;
struct clk *clk_apbif;
- int dma_sel;
resource_size_t apbif_addr;
struct regmap *regmap_apbif;
struct regmap *regmap_ahub;
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index 231a785..362e8f7 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -73,47 +73,6 @@
return 0;
}
-static int tegra30_i2s_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
- int ret;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- ret = tegra30_ahub_allocate_tx_fifo(&i2s->playback_fifo_cif,
- &i2s->playback_dma_data.addr,
- &i2s->playback_dma_data.slave_id);
- i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- i2s->playback_dma_data.maxburst = 4;
- tegra30_ahub_set_rx_cif_source(i2s->playback_i2s_cif,
- i2s->playback_fifo_cif);
- } else {
- ret = tegra30_ahub_allocate_rx_fifo(&i2s->capture_fifo_cif,
- &i2s->capture_dma_data.addr,
- &i2s->capture_dma_data.slave_id);
- i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- i2s->capture_dma_data.maxburst = 4;
- tegra30_ahub_set_rx_cif_source(i2s->capture_fifo_cif,
- i2s->capture_i2s_cif);
- }
-
- return ret;
-}
-
-static void tegra30_i2s_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- tegra30_ahub_unset_rx_cif_source(i2s->playback_i2s_cif);
- tegra30_ahub_free_tx_fifo(i2s->playback_fifo_cif);
- } else {
- tegra30_ahub_unset_rx_cif_source(i2s->capture_fifo_cif);
- tegra30_ahub_free_rx_fifo(i2s->capture_fifo_cif);
- }
-}
-
static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
unsigned int fmt)
{
@@ -317,8 +276,6 @@
}
static struct snd_soc_dai_ops tegra30_i2s_dai_ops = {
- .startup = tegra30_i2s_startup,
- .shutdown = tegra30_i2s_shutdown,
.set_fmt = tegra30_i2s_set_fmt,
.hw_params = tegra30_i2s_hw_params,
.trigger = tegra30_i2s_trigger,
@@ -499,15 +456,51 @@
goto err_pm_disable;
}
+ i2s->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ i2s->playback_dma_data.maxburst = 4;
+ ret = tegra30_ahub_allocate_tx_fifo(&i2s->playback_fifo_cif,
+ i2s->playback_dma_chan,
+ sizeof(i2s->playback_dma_chan),
+ &i2s->playback_dma_data.addr);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not alloc TX FIFO: %d\n", ret);
+ goto err_suspend;
+ }
+ ret = tegra30_ahub_set_rx_cif_source(i2s->playback_i2s_cif,
+ i2s->playback_fifo_cif);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not route TX FIFO: %d\n", ret);
+ goto err_free_tx_fifo;
+ }
+
+ i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ i2s->capture_dma_data.maxburst = 4;
+ ret = tegra30_ahub_allocate_rx_fifo(&i2s->capture_fifo_cif,
+ i2s->capture_dma_chan,
+ sizeof(i2s->capture_dma_chan),
+ &i2s->capture_dma_data.addr);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not alloc RX FIFO: %d\n", ret);
+ goto err_unroute_tx_fifo;
+ }
+ ret = tegra30_ahub_set_rx_cif_source(i2s->capture_fifo_cif,
+ i2s->capture_i2s_cif);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not route TX FIFO: %d\n", ret);
+ goto err_free_rx_fifo;
+ }
+
ret = snd_soc_register_component(&pdev->dev, &tegra30_i2s_component,
&i2s->dai, 1);
if (ret) {
dev_err(&pdev->dev, "Could not register DAI: %d\n", ret);
ret = -ENOMEM;
- goto err_suspend;
+ goto err_unroute_rx_fifo;
}
- ret = tegra_pcm_platform_register(&pdev->dev);
+ ret = tegra_pcm_platform_register_with_chan_names(&pdev->dev,
+ &i2s->dma_config, i2s->playback_dma_chan,
+ i2s->capture_dma_chan);
if (ret) {
dev_err(&pdev->dev, "Could not register PCM: %d\n", ret);
goto err_unregister_component;
@@ -517,6 +510,14 @@
err_unregister_component:
snd_soc_unregister_component(&pdev->dev);
+err_unroute_rx_fifo:
+ tegra30_ahub_unset_rx_cif_source(i2s->capture_fifo_cif);
+err_free_rx_fifo:
+ tegra30_ahub_free_rx_fifo(i2s->capture_fifo_cif);
+err_unroute_tx_fifo:
+ tegra30_ahub_unset_rx_cif_source(i2s->playback_i2s_cif);
+err_free_tx_fifo:
+ tegra30_ahub_free_tx_fifo(i2s->playback_fifo_cif);
err_suspend:
if (!pm_runtime_status_suspended(&pdev->dev))
tegra30_i2s_runtime_suspend(&pdev->dev);
@@ -539,6 +540,12 @@
tegra_pcm_platform_unregister(&pdev->dev);
snd_soc_unregister_component(&pdev->dev);
+ tegra30_ahub_unset_rx_cif_source(i2s->capture_fifo_cif);
+ tegra30_ahub_free_rx_fifo(i2s->capture_fifo_cif);
+
+ tegra30_ahub_unset_rx_cif_source(i2s->playback_i2s_cif);
+ tegra30_ahub_free_tx_fifo(i2s->playback_fifo_cif);
+
clk_put(i2s->clk_i2s);
return 0;
diff --git a/sound/soc/tegra/tegra30_i2s.h b/sound/soc/tegra/tegra30_i2s.h
index 4d0b0a3..774fc6a 100644
--- a/sound/soc/tegra/tegra30_i2s.h
+++ b/sound/soc/tegra/tegra30_i2s.h
@@ -238,11 +238,14 @@
struct clk *clk_i2s;
enum tegra30_ahub_txcif capture_i2s_cif;
enum tegra30_ahub_rxcif capture_fifo_cif;
+ char capture_dma_chan[8];
struct snd_dmaengine_dai_dma_data capture_dma_data;
enum tegra30_ahub_rxcif playback_i2s_cif;
enum tegra30_ahub_txcif playback_fifo_cif;
+ char playback_dma_chan[8];
struct snd_dmaengine_dai_dma_data playback_dma_data;
struct regmap *regmap;
+ struct snd_dmaengine_pcm_config dma_config;
};
#endif
diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c
index 7b2d23b..7ce5c33 100644
--- a/sound/soc/tegra/tegra_pcm.c
+++ b/sound/soc/tegra/tegra_pcm.c
@@ -61,12 +61,23 @@
int tegra_pcm_platform_register(struct device *dev)
{
- return snd_dmaengine_pcm_register(dev, &tegra_dmaengine_pcm_config,
- SND_DMAENGINE_PCM_FLAG_NO_DT |
- SND_DMAENGINE_PCM_FLAG_COMPAT);
+ return snd_dmaengine_pcm_register(dev, &tegra_dmaengine_pcm_config, 0);
}
EXPORT_SYMBOL_GPL(tegra_pcm_platform_register);
+int tegra_pcm_platform_register_with_chan_names(struct device *dev,
+ struct snd_dmaengine_pcm_config *config,
+ char *txdmachan, char *rxdmachan)
+{
+ *config = tegra_dmaengine_pcm_config;
+ config->dma_dev = dev->parent;
+ config->chan_names[0] = txdmachan;
+ config->chan_names[1] = rxdmachan;
+
+ return snd_dmaengine_pcm_register(dev, config, 0);
+}
+EXPORT_SYMBOL_GPL(tegra_pcm_platform_register_with_chan_names);
+
void tegra_pcm_platform_unregister(struct device *dev)
{
return snd_dmaengine_pcm_unregister(dev);
diff --git a/sound/soc/tegra/tegra_pcm.h b/sound/soc/tegra/tegra_pcm.h
index 68ad901..7883dec 100644
--- a/sound/soc/tegra/tegra_pcm.h
+++ b/sound/soc/tegra/tegra_pcm.h
@@ -31,7 +31,12 @@
#ifndef __TEGRA_PCM_H__
#define __TEGRA_PCM_H__
+struct snd_dmaengine_pcm_config;
+
int tegra_pcm_platform_register(struct device *dev);
+int tegra_pcm_platform_register_with_chan_names(struct device *dev,
+ struct snd_dmaengine_pcm_config *config,
+ char *txdmachan, char *rxdmachan);
void tegra_pcm_platform_unregister(struct device *dev);
#endif