staging: brcm80211: Remove siutils dependence from dhd_sdio.c
Remove siutils related functions and resources from dhd_sdio.c
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index 74d7935..dc80e27 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -180,6 +180,7 @@
u32 ramcorebase;
u32 armcorebase;
u32 pmurev;
+ u32 ramsize;
};
/* Private data for SDIO bus interaction */
@@ -187,7 +188,6 @@
dhd_pub_t *dhd;
bcmsdh_info_t *sdh; /* Handle for BCMSDH calls */
- si_t *sih; /* Handle for SI calls */
struct chip_info *ci; /* Chip info struct */
char *vars; /* Variables (from CIS and/or other) */
uint varsz; /* Size of variables buffer */
@@ -535,8 +535,8 @@
clkreq =
bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
- if ((bus->sih->chip == BCM4329_CHIP_ID)
- && (bus->sih->chiprev == 0))
+ if ((bus->ci->chip == BCM4329_CHIP_ID)
+ && (bus->ci->chiprev == 0))
clkreq |= SBSDIO_FORCE_ALP;
bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
@@ -547,8 +547,8 @@
return BCME_ERROR;
}
- if (pendok && ((bus->sih->buscoretype == PCMCIA_CORE_ID)
- && (bus->sih->buscorerev == 9))) {
+ if (pendok && ((bus->ci->buscoretype == PCMCIA_CORE_ID)
+ && (bus->ci->buscorerev == 9))) {
u32 dummy, retries;
R_SDREG(dummy, &bus->regs->clockctlstatus, retries);
}
@@ -842,8 +842,8 @@
SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
/* Isolate the bus */
- if (bus->sih->chip != BCM4329_CHIP_ID
- && bus->sih->chip != BCM4319_CHIP_ID) {
+ if (bus->ci->chip != BCM4329_CHIP_ID
+ && bus->ci->chip != BCM4319_CHIP_ID) {
bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL,
SBSDIO_DEVCTL_PADS_ISO, NULL);
}
@@ -859,8 +859,8 @@
/* Force pad isolation off if possible
(in case power never toggled) */
- if ((bus->sih->buscoretype == PCMCIA_CORE_ID)
- && (bus->sih->buscorerev >= 10))
+ if ((bus->ci->buscoretype == PCMCIA_CORE_ID)
+ && (bus->ci->buscorerev >= 10))
bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, 0,
NULL);
@@ -2920,14 +2920,11 @@
/* If F2 successfully enabled, set core and enable interrupts */
if (ready == enable) {
- /* Make sure we're talking to the core. */
- bus->regs = si_setcore(bus->sih, PCMCIA_CORE_ID, 0);
- if (!(bus->regs))
- bus->regs = si_setcore(bus->sih, SDIOD_CORE_ID, 0);
-
/* Set up the interrupt mask and enable interrupts */
bus->hostintmask = HOSTINTMASK;
- W_SDREG(bus->hostintmask, &bus->regs->hostintmask, retries);
+ W_SDREG(bus->hostintmask,
+ (unsigned int *)CORE_BUS_REG(bus->ci->buscorebase,
+ hostintmask), retries);
bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_WATERMARK,
(u8) watermark, &err);
@@ -5187,7 +5184,10 @@
#endif /* DHD_DEBUG */
- /* Force PLL off until si_attach() programs PLL control regs */
+ /*
+ * Force PLL off until dhdsdio_chip_attach()
+ * programs PLL control regs
+ */
bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
DHD_INIT_CLKCTL1, &err);
@@ -5253,23 +5253,16 @@
}
#endif /* DHD_DEBUG */
- /* si_attach() will provide an SI handle and scan the backplane */
- bus->sih = si_attach((uint) devid, regsva, DHD_BUS, sdh,
- &bus->vars, &bus->varsz);
- if (!(bus->sih)) {
- DHD_ERROR(("%s: si_attach failed!\n", __func__));
- goto fail;
- }
if (dhdsdio_chip_attach(bus, regsva)) {
DHD_ERROR(("%s: dhdsdio_chip_attach failed!\n", __func__));
goto fail;
}
- bcmsdh_chipinfo(sdh, bus->sih->chip, bus->sih->chiprev);
+ bcmsdh_chipinfo(sdh, bus->ci->chip, bus->ci->chiprev);
- if (!dhdsdio_chipmatch((u16) bus->sih->chip)) {
+ if (!dhdsdio_chipmatch((u16) bus->ci->chip)) {
DHD_ERROR(("%s: unsupported chip: 0x%04x\n",
- __func__, bus->sih->chip));
+ __func__, bus->ci->chip));
goto fail;
}
@@ -5277,14 +5270,9 @@
/* Get info on the ARM and SOCRAM cores... */
if (!DHD_NOPMU(bus)) {
- if ((si_setcore(bus->sih, ARM7S_CORE_ID, 0)) ||
- (si_setcore(bus->sih, ARMCM3_CORE_ID, 0))) {
- bus->armrev = si_corerev(bus->sih);
- } else {
- DHD_ERROR(("%s: failed to find ARM core!\n", __func__));
- goto fail;
- }
- bus->orig_ramsize = si_socram_size(bus->sih);
+ bus->armrev = SBCOREREV(bcmsdh_reg_read(bus->sdh,
+ CORE_SB(bus->ci->armcorebase, sbidhigh), 4));
+ bus->orig_ramsize = bus->ci->ramsize;
if (!(bus->orig_ramsize)) {
DHD_ERROR(("%s: failed to find SOCRAM memory!\n",
__func__));
@@ -5298,17 +5286,7 @@
bus->ramsize, bus->orig_ramsize));
}
- /* ...but normally deal with the SDPCMDEV core */
- bus->regs = si_setcore(bus->sih, PCMCIA_CORE_ID, 0);
- if (!bus->regs) {
- bus->regs = si_setcore(bus->sih, SDIOD_CORE_ID, 0);
- if (!bus->regs) {
- DHD_ERROR(("%s: failed to find SDIODEV core!\n",
- __func__));
- goto fail;
- }
- }
- bus->sdpcmrev = si_corerev(bus->sih);
+ bus->regs = (void *)bus->ci->buscorebase;
/* Set core control so an SDIO reset does a backplane reset */
OR_REG(&bus->regs->corecontrol, CC_BPRESEN);
@@ -5522,13 +5500,9 @@
if (bus->dhd && bus->dhd->dongle_reset)
return;
- if (bus->sih) {
+ if (bus->ci) {
dhdsdio_clkctl(bus, CLK_AVAIL, false);
-#if !defined(BCMLXSDMMC)
- si_watchdog(bus->sih, 4);
-#endif /* !defined(BCMLXSDMMC) */
dhdsdio_clkctl(bus, CLK_NONE, false);
- si_detach(bus->sih);
dhdsdio_chip_detach(bus);
if (bus->vars && bus->varsz)
kfree(bus->vars);
@@ -5955,8 +5929,8 @@
uint dhd_bus_chip(struct dhd_bus *bus)
{
- ASSERT(bus->sih != NULL);
- return bus->sih->chip;
+ ASSERT(bus->ci != NULL);
+ return bus->ci->chip;
}
void *dhd_bus_pub(struct dhd_bus *bus)
@@ -6071,6 +6045,7 @@
ci->buscorebase = BCM4329_CORE_BUS_BASE;
ci->ramcorebase = BCM4329_CORE_SOCRAM_BASE;
ci->armcorebase = BCM4329_CORE_ARM_BASE;
+ ci->ramsize = BCM4329_RAMSIZE;
break;
default:
DHD_ERROR(("%s: chipid 0x%x is not supported\n",