iwlwifi: change max HT and VHT A-MPDU exponent
Add two new parameters to iwl_cfg:
max_ht_ampdu_exponent and max_vht_ampdu_exponent.
These parameters, if set, will set new values to the maximum of
HT and VHT A-MPDU exponent for the A-MPDU length exponent.
Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index b04b885..b4e9bc7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -132,8 +132,8 @@
.base_params = &iwl7000_base_params, \
.led_mode = IWL_LED_RF_STATE, \
.nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_7000, \
- .non_shared_ant = ANT_A
-
+ .non_shared_ant = ANT_A, \
+ .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl7260_2ac_cfg = {
.name = "Intel(R) Dual Band Wireless AC 7260",
diff --git a/drivers/net/wireless/iwlwifi/iwl-8000.c b/drivers/net/wireless/iwlwifi/iwl-8000.c
index 896ea90..0919759 100644
--- a/drivers/net/wireless/iwlwifi/iwl-8000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-8000.c
@@ -91,6 +91,10 @@
/* Max SDIO RX aggregation size of the ADDBA request/response */
#define MAX_RX_AGG_SIZE_8260_SDIO 28
+/* Max A-MPDU exponent for HT and VHT */
+#define MAX_HT_AMPDU_EXPONENT_8260_SDIO IEEE80211_HT_MAX_AMPDU_32K
+#define MAX_VHT_AMPDU_EXPONENT_8260_SDIO IEEE80211_VHT_MAX_AMPDU_32K
+
static const struct iwl_base_params iwl8000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_8000,
.num_of_queues = IWLAGN_NUM_QUEUES,
@@ -137,6 +141,7 @@
.ht_params = &iwl8000_ht_params,
.nvm_ver = IWL8000_NVM_VERSION,
.nvm_calib_ver = IWL8000_TX_POWER_VERSION,
+ .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K,
};
const struct iwl_cfg iwl8260_2ac_sdio_cfg = {
@@ -149,6 +154,8 @@
.default_nvm_file = DEFAULT_NVM_FILE_FAMILY_8000,
.max_rx_agg_size = MAX_RX_AGG_SIZE_8260_SDIO,
.disable_dummy_notification = true,
+ .max_ht_ampdu_exponent = MAX_HT_AMPDU_EXPONENT_8260_SDIO,
+ .max_vht_ampdu_exponent = MAX_VHT_AMPDU_EXPONENT_8260_SDIO,
};
MODULE_FIRMWARE(IWL8000_MODULE_FIRMWARE(IWL8000_UCODE_API_OK));
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index f8aa9cf..c6ae4d4e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -257,6 +257,10 @@
* @pwr_tx_backoffs: translation table between power limits and backoffs
* @max_rx_agg_size: max RX aggregation size of the ADDBA request/response
* @max_tx_agg_size: max TX aggregation size of the ADDBA request/response
+ * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the
+ * station can receive in HT
+ * @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the
+ * station can receive in VHT
*
* We enable the driver to be backward compatible wrt. hardware features.
* API differences in uCode shouldn't be handled here but through TLVs
@@ -297,6 +301,8 @@
unsigned int max_rx_agg_size;
bool disable_dummy_notification;
unsigned int max_tx_agg_size;
+ unsigned int max_ht_ampdu_exponent;
+ unsigned int max_vht_ampdu_exponent;
};
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
index 74b796d..41ff85d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c
@@ -764,7 +764,7 @@
if (iwlwifi_mod_params.amsdu_size_8K)
ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
- ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_info->ampdu_factor = cfg->max_ht_ampdu_exponent;
ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_4;
ht_info->mcs.rx_mask[0] = 0xFF;
diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
index c302e74..06e02fc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c
@@ -325,6 +325,8 @@
{
int num_rx_ants = num_of_ant(rx_chains);
int num_tx_ants = num_of_ant(tx_chains);
+ unsigned int max_ampdu_exponent = (cfg->max_vht_ampdu_exponent ?:
+ IEEE80211_VHT_MAX_AMPDU_1024K);
vht_cap->vht_supported = true;
@@ -332,7 +334,8 @@
IEEE80211_VHT_CAP_RXSTBC_1 |
IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT |
- 7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
+ max_ampdu_exponent <<
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT;
if (cfg->ht_params->ldpc)
vht_cap->cap |= IEEE80211_VHT_CAP_RXLDPC;