Merge branches 'devel-gpmc' and 'devel-misc' into omap-for-linus
diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm
index 5389440..9012bb0 100644
--- a/Documentation/arm/OMAP/omap_pm
+++ b/Documentation/arm/OMAP/omap_pm
@@ -127,3 +127,28 @@
10. (*pdata->cpu_set_freq)(unsigned long f)
11. (*pdata->cpu_get_freq)(void)
+
+Customizing OPP for platform
+============================
+Defining CONFIG_PM should enable OPP layer for the silicon
+and the registration of OPP table should take place automatically.
+However, in special cases, the default OPP table may need to be
+tweaked, for e.g.:
+ * enable default OPPs which are disabled by default, but which
+ could be enabled on a platform
+ * Disable an unsupported OPP on the platform
+ * Define and add a custom opp table entry
+in these cases, the board file needs to do additional steps as follows:
+arch/arm/mach-omapx/board-xyz.c
+ #include "pm.h"
+ ....
+ static void __init omap_xyz_init_irq(void)
+ {
+ ....
+ /* Initialize the default table */
+ omapx_opp_init();
+ /* Do customization to the defaults */
+ ....
+ }
+NOTE: omapx_opp_init will be omap3_opp_init or as required
+based on the omap family.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index cdd2a6e..8b61c93 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2175,11 +2175,6 @@
reset_devices [KNL] Force drivers to reset the underlying device
during initialization.
- resource_alloc_from_bottom
- Allocate new resources from the beginning of available
- space, not the end. If you need to use this, please
- report a bug.
-
resume= [SWSUSP]
Specify the partition device for software suspend
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 489e9ba..41cc7b3 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -379,8 +379,8 @@
zero)
bool pm_runtime_suspended(struct device *dev);
- - return true if the device's runtime PM status is 'suspended', or false
- otherwise
+ - return true if the device's runtime PM status is 'suspended' and its
+ 'power.disable_depth' field is equal to zero, or false otherwise
void pm_runtime_allow(struct device *dev);
- set the power.runtime_auto flag for the device and decrease its usage
diff --git a/Makefile b/Makefile
index 5aa4427..77044b7 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 62d686f..d13add7 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -65,7 +65,7 @@
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index bba5a56..feb6578 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -31,6 +31,7 @@
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>
#include "sam9_smc.h"
#include "generic.h"
@@ -38,11 +39,7 @@
static void __init pcontrol_g20_map_io(void)
{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
- at91_register_uart(0, 0, 0);
+ stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@@ -54,9 +51,6 @@
/* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
@@ -66,38 +60,6 @@
}
-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.ncs_read_setup = 16,
.nrd_setup = 18,
@@ -138,14 +100,6 @@
.tdf_cycles = 1,
} };
-static void __init add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &nand_smc_config);
- at91_add_device_nand(&nand_data);
-}
-
-
static void __init add_device_pcontrol(void)
{
/* configure chip-select 4 (IO compatible to 8051 X4 ) */
@@ -156,23 +110,6 @@
/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
- .slot[0] = {
- .bus_width = 4,
- },
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
- .wire4 = 1,
-};
-#endif
-
-
-/*
* USB Host port
*/
static struct at91_usbh_data __initdata usbh_data = {
@@ -265,42 +202,13 @@
};
-/*
- * Dallas 1-Wire DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
- .pin = AT91_PIN_PA29,
- .is_open_drain = 1,
-};
-
-static struct platform_device w1_device = {
- .name = "w1-gpio",
- .id = -1,
- .dev.platform_data = &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
- at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
- at91_set_multi_drive(w1_gpio_pdata.pin, 1);
- platform_device_register(&w1_device);
-}
-
-
static void __init pcontrol_g20_board_init(void)
{
- at91_add_device_serial();
- add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
- at91_add_device_mci(0, &mmc_data);
-#else
- at91_add_device_mmc(0, &mmc_data);
-#endif
+ stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
at91_add_device_i2c(pcontrol_g20_i2c_devices,
ARRAY_SIZE(pcontrol_g20_i2c_devices));
- add_wire1();
add_device_pcontrol();
at91_add_device_spi(pcontrol_g20_spi_devices,
ARRAY_SIZE(pcontrol_g20_spi_devices));
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 5206eef..f8902b1 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,7 +32,7 @@
#include "generic.h"
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
@@ -40,6 +40,24 @@
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+ stamp9g20_map_io();
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+ stamp9g20_map_io();
+
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
@@ -56,26 +74,6 @@
/* USART5 on ttyS6. (Rx, Tx only) */
at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static void __init init_irq(void)
@@ -156,7 +154,7 @@
.pullup_pin = 0, /* pull-up driven by UDC */
};
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
.vbus_pin = AT91_PIN_PA22,
.pullup_pin = 0, /* pull-up driven by UDC */
};
@@ -190,7 +188,7 @@
}
};
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
{
.name = "D8",
.gpio = AT91_PIN_PB18,
@@ -250,7 +248,7 @@
}
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
{
/* Serial */
at91_add_device_serial();
@@ -262,34 +260,40 @@
#else
at91_add_device_mmc(0, &mmc_data);
#endif
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
/* W1 */
add_w1();
}
static void __init portuxg20_board_init(void)
{
- generic_board_init();
- /* SPI */
- at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
at91_add_device_udc(&portuxg20_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* SPI */
+ at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
/* LEDs */
at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
}
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
{
- generic_board_init();
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
- at91_add_device_udc(&stamp9g20_udc_data);
+ at91_add_device_udc(&stamp9g20evb_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
/* LEDs */
- at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+ at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
}
MACHINE_START(PORTUXG20, "taskit PortuxG20")
@@ -305,7 +309,7 @@
/* Maintainer: taskit GmbH */
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = stamp9g20_map_io,
+ .map_io = stamp9g20evb_map_io,
.init_irq = init_irq,
- .init_machine = stamp9g20_board_init,
+ .init_machine = stamp9g20evb_board_init,
MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 7525cee..9113da6 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -658,7 +658,7 @@
/* Now set uhpck values */
uhpck.parent = &utmi_clk;
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz = utmi_clk.rate_hz;
uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h
new file mode 100644
index 0000000..6120f9c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/stamp9g20.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 0b1c07f..6ee1950 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e143950..bd0495a 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -43,84 +43,82 @@
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
-static int ams_delta_keymap[] = {
+static const unsigned int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
- KEY(3, 0, KEY_COFFEE), /* Games */
- KEY(2, 0, KEY_QUESTION), /* Directory */
- KEY(3, 2, KEY_CONNECT), /* Internet */
- KEY(2, 1, KEY_SHOP), /* Services */
+ KEY(0, 3, KEY_COFFEE), /* Games */
+ KEY(0, 2, KEY_QUESTION), /* Directory */
+ KEY(2, 3, KEY_CONNECT), /* Internet */
+ KEY(1, 2, KEY_SHOP), /* Services */
KEY(1, 1, KEY_PHONE), /* VoiceMail */
- KEY(1, 0, KEY_DELETE), /* Delete */
+ KEY(0, 1, KEY_DELETE), /* Delete */
KEY(2, 2, KEY_PLAY), /* Play */
- KEY(0, 1, KEY_PAGEUP), /* Up */
- KEY(3, 1, KEY_PAGEDOWN), /* Down */
- KEY(0, 2, KEY_EMAIL), /* ReadEmail */
- KEY(1, 2, KEY_STOP), /* Stop */
+ KEY(1, 0, KEY_PAGEUP), /* Up */
+ KEY(1, 3, KEY_PAGEDOWN), /* Down */
+ KEY(2, 0, KEY_EMAIL), /* ReadEmail */
+ KEY(2, 1, KEY_STOP), /* Stop */
/* Numeric keypad portion */
- KEY(7, 0, KEY_KP1),
- KEY(6, 0, KEY_KP2),
- KEY(5, 0, KEY_KP3),
- KEY(7, 1, KEY_KP4),
- KEY(6, 1, KEY_KP5),
- KEY(5, 1, KEY_KP6),
- KEY(7, 2, KEY_KP7),
- KEY(6, 2, KEY_KP8),
- KEY(5, 2, KEY_KP9),
- KEY(6, 3, KEY_KP0),
- KEY(7, 3, KEY_KPASTERISK),
- KEY(5, 3, KEY_KPDOT), /* # key */
- KEY(2, 7, KEY_NUMLOCK), /* Mute */
- KEY(1, 7, KEY_KPMINUS), /* Recall */
- KEY(1, 6, KEY_KPPLUS), /* Redial */
- KEY(6, 7, KEY_KPSLASH), /* Handsfree */
- KEY(0, 6, KEY_ENTER), /* Video */
+ KEY(0, 7, KEY_KP1),
+ KEY(0, 6, KEY_KP2),
+ KEY(0, 5, KEY_KP3),
+ KEY(1, 7, KEY_KP4),
+ KEY(1, 6, KEY_KP5),
+ KEY(1, 5, KEY_KP6),
+ KEY(2, 7, KEY_KP7),
+ KEY(2, 6, KEY_KP8),
+ KEY(2, 5, KEY_KP9),
+ KEY(3, 6, KEY_KP0),
+ KEY(3, 7, KEY_KPASTERISK),
+ KEY(3, 5, KEY_KPDOT), /* # key */
+ KEY(7, 2, KEY_NUMLOCK), /* Mute */
+ KEY(7, 1, KEY_KPMINUS), /* Recall */
+ KEY(6, 1, KEY_KPPLUS), /* Redial */
+ KEY(7, 6, KEY_KPSLASH), /* Handsfree */
+ KEY(6, 0, KEY_ENTER), /* Video */
- KEY(4, 7, KEY_CAMERA), /* Photo */
+ KEY(7, 4, KEY_CAMERA), /* Photo */
- KEY(4, 0, KEY_F2), /* Home */
- KEY(4, 1, KEY_F3), /* Office */
- KEY(4, 2, KEY_F4), /* Mobile */
+ KEY(0, 4, KEY_F2), /* Home */
+ KEY(1, 4, KEY_F3), /* Office */
+ KEY(2, 4, KEY_F4), /* Mobile */
KEY(7, 7, KEY_F5), /* SMS */
- KEY(5, 7, KEY_F6), /* Email */
+ KEY(7, 5, KEY_F6), /* Email */
/* QWERTY portion of keypad */
- KEY(4, 3, KEY_Q),
+ KEY(3, 4, KEY_Q),
KEY(3, 3, KEY_W),
- KEY(2, 3, KEY_E),
- KEY(1, 3, KEY_R),
- KEY(0, 3, KEY_T),
- KEY(7, 4, KEY_Y),
- KEY(6, 4, KEY_U),
- KEY(5, 4, KEY_I),
+ KEY(3, 2, KEY_E),
+ KEY(3, 1, KEY_R),
+ KEY(3, 0, KEY_T),
+ KEY(4, 7, KEY_Y),
+ KEY(4, 6, KEY_U),
+ KEY(4, 5, KEY_I),
KEY(4, 4, KEY_O),
- KEY(3, 4, KEY_P),
+ KEY(4, 3, KEY_P),
- KEY(2, 4, KEY_A),
- KEY(1, 4, KEY_S),
- KEY(0, 4, KEY_D),
- KEY(7, 5, KEY_F),
- KEY(6, 5, KEY_G),
+ KEY(4, 2, KEY_A),
+ KEY(4, 1, KEY_S),
+ KEY(4, 0, KEY_D),
+ KEY(5, 7, KEY_F),
+ KEY(5, 6, KEY_G),
KEY(5, 5, KEY_H),
- KEY(4, 5, KEY_J),
- KEY(3, 5, KEY_K),
- KEY(2, 5, KEY_L),
+ KEY(5, 4, KEY_J),
+ KEY(5, 3, KEY_K),
+ KEY(5, 2, KEY_L),
- KEY(1, 5, KEY_Z),
- KEY(0, 5, KEY_X),
- KEY(7, 6, KEY_C),
+ KEY(5, 1, KEY_Z),
+ KEY(5, 0, KEY_X),
+ KEY(6, 7, KEY_C),
KEY(6, 6, KEY_V),
- KEY(5, 6, KEY_B),
- KEY(4, 6, KEY_N),
- KEY(3, 6, KEY_M),
- KEY(2, 6, KEY_SPACE),
+ KEY(6, 5, KEY_B),
+ KEY(6, 4, KEY_N),
+ KEY(6, 3, KEY_M),
+ KEY(6, 2, KEY_SPACE),
- KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */
- KEY(3, 7, KEY_LEFTCTRL), /* Vol down */
-
- 0
+ KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */
+ KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
};
void ams_delta_latch1_write(u8 mask, u8 value)
@@ -189,11 +187,15 @@
},
};
+static const struct matrix_keymap_data ams_delta_keymap_data = {
+ .keymap = ams_delta_keymap,
+ .keymap_size = ARRAY_SIZE(ams_delta_keymap),
+};
+
static struct omap_kp_platform_data ams_delta_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = ams_delta_keymap,
- .keymapsize = ARRAY_SIZE(ams_delta_keymap),
+ .keymap_data = &ams_delta_keymap_data,
.delay = 9,
};
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 0c3f396..0efb9db 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -69,36 +69,35 @@
#define fsample_cpld_clear(bit) \
fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-static int fsample_keymap[] = {
- KEY(0,0,KEY_UP),
- KEY(0,1,KEY_RIGHT),
- KEY(0,2,KEY_LEFT),
- KEY(0,3,KEY_DOWN),
- KEY(0,4,KEY_ENTER),
- KEY(1,0,KEY_F10),
- KEY(1,1,KEY_SEND),
- KEY(1,2,KEY_END),
- KEY(1,3,KEY_VOLUMEDOWN),
- KEY(1,4,KEY_VOLUMEUP),
- KEY(1,5,KEY_RECORD),
- KEY(2,0,KEY_F9),
- KEY(2,1,KEY_3),
- KEY(2,2,KEY_6),
- KEY(2,3,KEY_9),
- KEY(2,4,KEY_KPDOT),
- KEY(3,0,KEY_BACK),
- KEY(3,1,KEY_2),
- KEY(3,2,KEY_5),
- KEY(3,3,KEY_8),
- KEY(3,4,KEY_0),
- KEY(3,5,KEY_KPSLASH),
- KEY(4,0,KEY_HOME),
- KEY(4,1,KEY_1),
- KEY(4,2,KEY_4),
- KEY(4,3,KEY_7),
- KEY(4,4,KEY_KPASTERISK),
- KEY(4,5,KEY_POWER),
- 0
+static const unsigned int fsample_keymap[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(1, 0, KEY_RIGHT),
+ KEY(2, 0, KEY_LEFT),
+ KEY(3, 0, KEY_DOWN),
+ KEY(4, 0, KEY_ENTER),
+ KEY(0, 1, KEY_F10),
+ KEY(1, 1, KEY_SEND),
+ KEY(2, 1, KEY_END),
+ KEY(3, 1, KEY_VOLUMEDOWN),
+ KEY(4, 1, KEY_VOLUMEUP),
+ KEY(5, 1, KEY_RECORD),
+ KEY(0, 2, KEY_F9),
+ KEY(1, 2, KEY_3),
+ KEY(2, 2, KEY_6),
+ KEY(3, 2, KEY_9),
+ KEY(4, 2, KEY_KPDOT),
+ KEY(0, 3, KEY_BACK),
+ KEY(1, 3, KEY_2),
+ KEY(2, 3, KEY_5),
+ KEY(3, 3, KEY_8),
+ KEY(4, 3, KEY_0),
+ KEY(5, 3, KEY_KPSLASH),
+ KEY(0, 4, KEY_HOME),
+ KEY(1, 4, KEY_1),
+ KEY(2, 4, KEY_4),
+ KEY(3, 4, KEY_7),
+ KEY(4, 4, KEY_KPASTERISK),
+ KEY(5, 4, KEY_POWER),
};
static struct smc91x_platdata smc91x_info = {
@@ -253,11 +252,15 @@
},
};
+static const struct matrix_keymap_data fsample_keymap_data = {
+ .keymap = fsample_keymap,
+ .keymap_size = ARRAY_SIZE(fsample_keymap),
+};
+
static struct omap_kp_platform_data kp_data = {
.rows = 8,
.cols = 8,
- .keymap = fsample_keymap,
- .keymapsize = ARRAY_SIZE(fsample_keymap),
+ .keymap_data = &fsample_keymap_data,
.delay = 4,
};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 082a73c..28b84aa 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -52,43 +52,42 @@
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
-static int h2_keymap[] = {
+static const unsigned int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_3),
- KEY(0, 3, KEY_F10),
- KEY(0, 4, KEY_F5),
- KEY(0, 5, KEY_9),
- KEY(1, 0, KEY_DOWN),
+ KEY(1, 0, KEY_RIGHT),
+ KEY(2, 0, KEY_3),
+ KEY(3, 0, KEY_F10),
+ KEY(4, 0, KEY_F5),
+ KEY(5, 0, KEY_9),
+ KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_2),
- KEY(1, 3, KEY_F9),
- KEY(1, 4, KEY_F7),
- KEY(1, 5, KEY_0),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_6),
+ KEY(2, 1, KEY_2),
+ KEY(3, 1, KEY_F9),
+ KEY(4, 1, KEY_F7),
+ KEY(5, 1, KEY_0),
+ KEY(0, 2, KEY_ENTER),
+ KEY(1, 2, KEY_6),
KEY(2, 2, KEY_1),
- KEY(2, 3, KEY_F2),
- KEY(2, 4, KEY_F6),
- KEY(2, 5, KEY_HOME),
- KEY(3, 0, KEY_8),
- KEY(3, 1, KEY_5),
- KEY(3, 2, KEY_F12),
+ KEY(3, 2, KEY_F2),
+ KEY(4, 2, KEY_F6),
+ KEY(5, 2, KEY_HOME),
+ KEY(0, 3, KEY_8),
+ KEY(1, 3, KEY_5),
+ KEY(2, 3, KEY_F12),
KEY(3, 3, KEY_F3),
- KEY(3, 4, KEY_F8),
- KEY(3, 5, KEY_END),
- KEY(4, 0, KEY_7),
- KEY(4, 1, KEY_4),
- KEY(4, 2, KEY_F11),
- KEY(4, 3, KEY_F1),
+ KEY(4, 3, KEY_F8),
+ KEY(5, 3, KEY_END),
+ KEY(0, 4, KEY_7),
+ KEY(1, 4, KEY_4),
+ KEY(2, 4, KEY_F11),
+ KEY(3, 4, KEY_F1),
KEY(4, 4, KEY_F4),
- KEY(4, 5, KEY_ESC),
- KEY(5, 0, KEY_F13),
- KEY(5, 1, KEY_F14),
- KEY(5, 2, KEY_F15),
- KEY(5, 3, KEY_F16),
- KEY(5, 4, KEY_SLEEP),
- 0
+ KEY(5, 4, KEY_ESC),
+ KEY(0, 5, KEY_F13),
+ KEY(1, 5, KEY_F14),
+ KEY(2, 5, KEY_F15),
+ KEY(3, 5, KEY_F16),
+ KEY(4, 5, KEY_SLEEP),
};
static struct mtd_partition h2_nor_partitions[] = {
@@ -270,14 +269,18 @@
},
};
+static const struct matrix_keymap_data h2_keymap_data = {
+ .keymap = h2_keymap,
+ .keymap_size = ARRAY_SIZE(h2_keymap),
+};
+
static struct omap_kp_platform_data h2_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = h2_keymap,
- .keymapsize = ARRAY_SIZE(h2_keymap),
- .rep = 1,
+ .keymap_data = &h2_keymap_data,
+ .rep = true,
.delay = 9,
- .dbounce = 1,
+ .dbounce = true,
};
static struct platform_device h2_kp_device = {
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index d2cff50..dbc8b8d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -56,43 +56,42 @@
#define H3_TS_GPIO 48
-static int h3_keymap[] = {
+static const unsigned int h3_keymap[] = {
KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_3),
- KEY(0, 3, KEY_F10),
- KEY(0, 4, KEY_F5),
- KEY(0, 5, KEY_9),
- KEY(1, 0, KEY_DOWN),
+ KEY(1, 0, KEY_RIGHT),
+ KEY(2, 0, KEY_3),
+ KEY(3, 0, KEY_F10),
+ KEY(4, 0, KEY_F5),
+ KEY(5, 0, KEY_9),
+ KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_2),
- KEY(1, 3, KEY_F9),
- KEY(1, 4, KEY_F7),
- KEY(1, 5, KEY_0),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_6),
+ KEY(2, 1, KEY_2),
+ KEY(3, 1, KEY_F9),
+ KEY(4, 1, KEY_F7),
+ KEY(5, 1, KEY_0),
+ KEY(0, 2, KEY_ENTER),
+ KEY(1, 2, KEY_6),
KEY(2, 2, KEY_1),
- KEY(2, 3, KEY_F2),
- KEY(2, 4, KEY_F6),
- KEY(2, 5, KEY_HOME),
- KEY(3, 0, KEY_8),
- KEY(3, 1, KEY_5),
- KEY(3, 2, KEY_F12),
+ KEY(3, 2, KEY_F2),
+ KEY(4, 2, KEY_F6),
+ KEY(5, 2, KEY_HOME),
+ KEY(0, 3, KEY_8),
+ KEY(1, 3, KEY_5),
+ KEY(2, 3, KEY_F12),
KEY(3, 3, KEY_F3),
- KEY(3, 4, KEY_F8),
- KEY(3, 5, KEY_END),
- KEY(4, 0, KEY_7),
- KEY(4, 1, KEY_4),
- KEY(4, 2, KEY_F11),
- KEY(4, 3, KEY_F1),
+ KEY(4, 3, KEY_F8),
+ KEY(5, 3, KEY_END),
+ KEY(0, 4, KEY_7),
+ KEY(1, 4, KEY_4),
+ KEY(2, 4, KEY_F11),
+ KEY(3, 4, KEY_F1),
KEY(4, 4, KEY_F4),
- KEY(4, 5, KEY_ESC),
- KEY(5, 0, KEY_F13),
- KEY(5, 1, KEY_F14),
- KEY(5, 2, KEY_F15),
- KEY(5, 3, KEY_F16),
- KEY(5, 4, KEY_SLEEP),
- 0
+ KEY(5, 4, KEY_ESC),
+ KEY(0, 5, KEY_F13),
+ KEY(1, 5, KEY_F14),
+ KEY(2, 5, KEY_F15),
+ KEY(3, 5, KEY_F16),
+ KEY(4, 5, KEY_SLEEP),
};
@@ -305,14 +304,18 @@
},
};
+static const struct matrix_keymap_data h3_keymap_data = {
+ .keymap = h3_keymap,
+ .keymap_size = ARRAY_SIZE(h3_keymap),
+};
+
static struct omap_kp_platform_data h3_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = h3_keymap,
- .keymapsize = ARRAY_SIZE(h3_keymap),
- .rep = 1,
+ .keymap_data = &h3_keymap_data,
+ .rep = true,
.delay = 9,
- .dbounce = 1,
+ .dbounce = true,
};
static struct platform_device h3_kp_device = {
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 742c6d1..f2c5c58 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -180,64 +180,68 @@
/* Keyboard definition */
-static int htc_herald_keymap[] = {
+static const unsigned int htc_herald_keymap[] = {
KEY(0, 0, KEY_RECORD), /* Mail button */
- KEY(0, 1, KEY_CAMERA), /* Camera */
- KEY(0, 2, KEY_PHONE), /* Send key */
- KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
- KEY(0, 4, KEY_F2), /* Right bar (landscape) */
- KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
- KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
- KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
+ KEY(1, 0, KEY_CAMERA), /* Camera */
+ KEY(2, 0, KEY_PHONE), /* Send key */
+ KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
+ KEY(4, 0, KEY_F2), /* Right bar (landscape) */
+ KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
+ KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
+ KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
KEY(1, 1, KEY_COMMA),
- KEY(1, 2, KEY_M),
- KEY(1, 3, KEY_K),
- KEY(1, 4, KEY_SLASH), /* OK key */
- KEY(1, 5, KEY_I),
- KEY(1, 6, KEY_U),
- KEY(2, 0, KEY_LEFTALT),
- KEY(2, 1, KEY_TAB),
+ KEY(2, 1, KEY_M),
+ KEY(3, 1, KEY_K),
+ KEY(4, 1, KEY_SLASH), /* OK key */
+ KEY(5, 1, KEY_I),
+ KEY(6, 1, KEY_U),
+ KEY(0, 2, KEY_LEFTALT),
+ KEY(1, 2, KEY_TAB),
KEY(2, 2, KEY_N),
- KEY(2, 3, KEY_J),
- KEY(2, 4, KEY_ENTER),
- KEY(2, 5, KEY_H),
- KEY(2, 6, KEY_Y),
- KEY(3, 0, KEY_SPACE),
- KEY(3, 1, KEY_L),
- KEY(3, 2, KEY_B),
+ KEY(3, 2, KEY_J),
+ KEY(4, 2, KEY_ENTER),
+ KEY(5, 2, KEY_H),
+ KEY(6, 2, KEY_Y),
+ KEY(0, 3, KEY_SPACE),
+ KEY(1, 3, KEY_L),
+ KEY(2, 3, KEY_B),
KEY(3, 3, KEY_V),
- KEY(3, 4, KEY_BACKSPACE),
- KEY(3, 5, KEY_G),
- KEY(3, 6, KEY_T),
- KEY(4, 0, KEY_CAPSLOCK), /* Shift */
- KEY(4, 1, KEY_C),
- KEY(4, 2, KEY_F),
- KEY(4, 3, KEY_R),
+ KEY(4, 3, KEY_BACKSPACE),
+ KEY(5, 3, KEY_G),
+ KEY(6, 3, KEY_T),
+ KEY(0, 4, KEY_CAPSLOCK), /* Shift */
+ KEY(1, 4, KEY_C),
+ KEY(2, 4, KEY_F),
+ KEY(3, 4, KEY_R),
KEY(4, 4, KEY_O),
- KEY(4, 5, KEY_E),
- KEY(4, 6, KEY_D),
- KEY(5, 0, KEY_X),
- KEY(5, 1, KEY_Z),
- KEY(5, 2, KEY_S),
- KEY(5, 3, KEY_W),
- KEY(5, 4, KEY_P),
+ KEY(5, 4, KEY_E),
+ KEY(6, 4, KEY_D),
+ KEY(0, 5, KEY_X),
+ KEY(1, 5, KEY_Z),
+ KEY(2, 5, KEY_S),
+ KEY(3, 5, KEY_W),
+ KEY(4, 5, KEY_P),
KEY(5, 5, KEY_Q),
- KEY(5, 6, KEY_A),
- KEY(6, 0, KEY_CONNECT), /* Voice button */
- KEY(6, 2, KEY_CANCEL), /* End key */
- KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
- KEY(6, 4, KEY_F1), /* Left bar (landscape) */
- KEY(6, 5, KEY_WWW), /* OK button (portrait) */
+ KEY(6, 5, KEY_A),
+ KEY(0, 6, KEY_CONNECT), /* Voice button */
+ KEY(2, 6, KEY_CANCEL), /* End key */
+ KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
+ KEY(4, 6, KEY_F1), /* Left bar (landscape) */
+ KEY(5, 6, KEY_WWW), /* OK button (portrait) */
KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
- 0
};
-struct omap_kp_platform_data htcherald_kp_data = {
+static const struct matrix_keymap_data htc_herald_keymap_data = {
+ .keymap = htc_herald_keymap,
+ .keymap_size = ARRAY_SIZE(htc_herald_keymap),
+};
+
+static struct omap_kp_platform_data htcherald_kp_data = {
.rows = 7,
.cols = 7,
.delay = 20,
- .rep = 1,
- .keymap = htc_herald_keymap,
+ .rep = true,
+ .keymap_data = &htc_herald_keymap_data,
};
static struct resource kp_resources[] = {
@@ -278,7 +282,7 @@
static struct gpio_keys_platform_data herald_gpio_keys_data = {
.buttons = herald_gpio_keys_table,
.nbuttons = ARRAY_SIZE(herald_gpio_keys_table),
- .rep = 1,
+ .rep = true,
};
static struct platform_device herald_gpiokeys_device = {
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 8d59b07..a36e674 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -44,17 +44,16 @@
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
-static int innovator_keymap[] = {
+static const unsigned int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
- KEY(0, 3, KEY_DOWN),
+ KEY(3, 0, KEY_DOWN),
KEY(1, 1, KEY_F2),
- KEY(1, 2, KEY_RIGHT),
- KEY(2, 0, KEY_F3),
- KEY(2, 1, KEY_F4),
+ KEY(2, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_F3),
+ KEY(1, 2, KEY_F4),
KEY(2, 2, KEY_UP),
- KEY(3, 2, KEY_ENTER),
+ KEY(2, 3, KEY_ENTER),
KEY(3, 3, KEY_LEFT),
- 0
};
static struct mtd_partition innovator_partitions[] = {
@@ -126,11 +125,15 @@
},
};
+static const struct matrix_keymap_data innovator_keymap_data = {
+ .keymap = innovator_keymap,
+ .keymap_size = ARRAY_SIZE(innovator_keymap),
+};
+
static struct omap_kp_platform_data innovator_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = innovator_keymap,
- .keymapsize = ARRAY_SIZE(innovator_keymap),
+ .keymap_data = &innovator_keymap_data,
.delay = 4,
};
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 605495b..d21f09d 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -54,19 +54,18 @@
omap_init_irq();
}
-static int nokia770_keymap[] = {
- KEY(0, 1, GROUP_0 | KEY_UP),
- KEY(0, 2, GROUP_1 | KEY_F5),
- KEY(1, 0, GROUP_0 | KEY_LEFT),
+static const unsigned int nokia770_keymap[] = {
+ KEY(1, 0, GROUP_0 | KEY_UP),
+ KEY(2, 0, GROUP_1 | KEY_F5),
+ KEY(0, 1, GROUP_0 | KEY_LEFT),
KEY(1, 1, GROUP_0 | KEY_ENTER),
- KEY(1, 2, GROUP_0 | KEY_RIGHT),
- KEY(2, 0, GROUP_1 | KEY_ESC),
- KEY(2, 1, GROUP_0 | KEY_DOWN),
+ KEY(2, 1, GROUP_0 | KEY_RIGHT),
+ KEY(0, 2, GROUP_1 | KEY_ESC),
+ KEY(1, 2, GROUP_0 | KEY_DOWN),
KEY(2, 2, GROUP_1 | KEY_F4),
- KEY(3, 0, GROUP_2 | KEY_F7),
- KEY(3, 1, GROUP_2 | KEY_F8),
- KEY(3, 2, GROUP_2 | KEY_F6),
- 0
+ KEY(0, 3, GROUP_2 | KEY_F7),
+ KEY(1, 3, GROUP_2 | KEY_F8),
+ KEY(2, 3, GROUP_2 | KEY_F6),
};
static struct resource nokia770_kp_resources[] = {
@@ -77,11 +76,15 @@
},
};
+static const struct matrix_keymap_data nokia770_keymap_data = {
+ .keymap = nokia770_keymap,
+ .keymap_size = ARRAY_SIZE(nokia770_keymap),
+};
+
static struct omap_kp_platform_data nokia770_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = nokia770_keymap,
- .keymapsize = ARRAY_SIZE(nokia770_keymap),
+ .keymap_data = &nokia770_keymap_data,
.delay = 4,
};
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index d44e717..7c5e211 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -338,25 +338,28 @@
*/
};
-static const int osk_keymap[] = {
+static const unsigned int osk_keymap[] = {
/* KEY(col, row, code) */
KEY(0, 0, KEY_F1), /* SW4 */
- KEY(0, 3, KEY_UP), /* (sw2/up) */
+ KEY(3, 0, KEY_UP), /* (sw2/up) */
KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
- KEY(1, 2, KEY_LEFT), /* (sw2/left) */
- KEY(2, 0, KEY_SPACE), /* SW3 */
- KEY(2, 1, KEY_ESC), /* SW6 */
+ KEY(2, 1, KEY_LEFT), /* (sw2/left) */
+ KEY(0, 2, KEY_SPACE), /* SW3 */
+ KEY(1, 2, KEY_ESC), /* SW6 */
KEY(2, 2, KEY_DOWN), /* (sw2/down) */
- KEY(3, 2, KEY_ENTER), /* (sw2/select) */
+ KEY(2, 3, KEY_ENTER), /* (sw2/select) */
KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
- 0
+};
+
+static const struct matrix_keymap_data osk_keymap_data = {
+ .keymap = osk_keymap,
+ .keymap_size = ARRAY_SIZE(osk_keymap),
};
static struct omap_kp_platform_data osk_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = (int *) osk_keymap,
- .keymapsize = ARRAY_SIZE(osk_keymap),
+ .keymap_data = &osk_keymap_data,
.delay = 9,
};
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 994dc6f..fb51ce6 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -65,25 +65,29 @@
omap_init_irq();
}
-static const int palmte_keymap[] = {
+static const unsigned int palmte_keymap[] = {
KEY(0, 0, KEY_F1), /* Calendar */
- KEY(0, 1, KEY_F2), /* Contacts */
- KEY(0, 2, KEY_F3), /* Tasks List */
- KEY(0, 3, KEY_F4), /* Note Pad */
- KEY(0, 4, KEY_POWER),
- KEY(1, 0, KEY_LEFT),
+ KEY(1, 0, KEY_F2), /* Contacts */
+ KEY(2, 0, KEY_F3), /* Tasks List */
+ KEY(3, 0, KEY_F4), /* Note Pad */
+ KEY(4, 0, KEY_POWER),
+ KEY(0, 1, KEY_LEFT),
KEY(1, 1, KEY_DOWN),
- KEY(1, 2, KEY_UP),
- KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_ENTER),
- 0,
+ KEY(2, 1, KEY_UP),
+ KEY(3, 1, KEY_RIGHT),
+ KEY(4, 1, KEY_ENTER),
+};
+
+static const struct matrix_keymap_data palmte_keymap_data = {
+ .keymap = palmte_keymap,
+ .keymap_size = ARRAY_SIZE(palmte_keymap),
};
static struct omap_kp_platform_data palmte_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = (int *) palmte_keymap,
- .rep = 1,
+ .keymap_data = &palmte_keymap_data,
+ .rep = true,
.delay = 12,
};
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index ed1400a..f04f2d3 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -51,19 +51,18 @@
#define PALMTT_MMC_WP_GPIO 8
#define PALMTT_HDQ_GPIO 11
-static int palmtt_keymap[] = {
+static const unsigned int palmtt_keymap[] = {
KEY(0, 0, KEY_ESC),
- KEY(0, 1, KEY_SPACE),
- KEY(0, 2, KEY_LEFTCTRL),
- KEY(0, 3, KEY_TAB),
- KEY(0, 4, KEY_ENTER),
- KEY(1, 0, KEY_LEFT),
+ KEY(1, 0, KEY_SPACE),
+ KEY(2, 0, KEY_LEFTCTRL),
+ KEY(3, 0, KEY_TAB),
+ KEY(4, 0, KEY_ENTER),
+ KEY(0, 1, KEY_LEFT),
KEY(1, 1, KEY_DOWN),
- KEY(1, 2, KEY_UP),
- KEY(1, 3, KEY_RIGHT),
- KEY(2, 0, KEY_SLEEP),
- KEY(2, 4, KEY_Y),
- 0
+ KEY(2, 1, KEY_UP),
+ KEY(3, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_SLEEP),
+ KEY(4, 2, KEY_Y),
};
static struct mtd_partition palmtt_partitions[] = {
@@ -136,10 +135,15 @@
},
};
+static const struct matrix_keymap_data palmtt_keymap_data = {
+ .keymap = palmtt_keymap,
+ .keymap_size = ARRAY_SIZE(palmtt_keymap),
+};
+
static struct omap_kp_platform_data palmtt_kp_data = {
.rows = 6,
.cols = 3,
- .keymap = palmtt_keymap,
+ .keymap_data = &palmtt_keymap_data,
};
static struct platform_device palmtt_kp_device = {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 2afac59..d7bbbe7 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -64,26 +64,30 @@
omap_init_irq();
}
-static int palmz71_keymap[] = {
+static const unsigned int palmz71_keymap[] = {
KEY(0, 0, KEY_F1),
- KEY(0, 1, KEY_F2),
- KEY(0, 2, KEY_F3),
- KEY(0, 3, KEY_F4),
- KEY(0, 4, KEY_POWER),
- KEY(1, 0, KEY_LEFT),
+ KEY(1, 0, KEY_F2),
+ KEY(2, 0, KEY_F3),
+ KEY(3, 0, KEY_F4),
+ KEY(4, 0, KEY_POWER),
+ KEY(0, 1, KEY_LEFT),
KEY(1, 1, KEY_DOWN),
- KEY(1, 2, KEY_UP),
- KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_ENTER),
- KEY(2, 0, KEY_CAMERA),
- 0,
+ KEY(2, 1, KEY_UP),
+ KEY(3, 1, KEY_RIGHT),
+ KEY(4, 1, KEY_ENTER),
+ KEY(0, 2, KEY_CAMERA),
+};
+
+static const struct matrix_keymap_data palmz71_keymap_data = {
+ .keymap = palmz71_keymap,
+ .keymap_size = ARRAY_SIZE(palmz71_keymap),
};
static struct omap_kp_platform_data palmz71_kp_data = {
.rows = 8,
.cols = 8,
- .keymap = palmz71_keymap,
- .rep = 1,
+ .keymap_data = &palmz71_keymap_data,
+ .rep = true,
.delay = 80,
};
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 69fda21..3c8ee84 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -36,36 +36,35 @@
#include <plat/common.h>
#include <plat/board.h>
-static int p2_keymap[] = {
- KEY(0,0,KEY_UP),
- KEY(0,1,KEY_RIGHT),
- KEY(0,2,KEY_LEFT),
- KEY(0,3,KEY_DOWN),
- KEY(0,4,KEY_ENTER),
- KEY(1,0,KEY_F10),
- KEY(1,1,KEY_SEND),
- KEY(1,2,KEY_END),
- KEY(1,3,KEY_VOLUMEDOWN),
- KEY(1,4,KEY_VOLUMEUP),
- KEY(1,5,KEY_RECORD),
- KEY(2,0,KEY_F9),
- KEY(2,1,KEY_3),
- KEY(2,2,KEY_6),
- KEY(2,3,KEY_9),
- KEY(2,4,KEY_KPDOT),
- KEY(3,0,KEY_BACK),
- KEY(3,1,KEY_2),
- KEY(3,2,KEY_5),
- KEY(3,3,KEY_8),
- KEY(3,4,KEY_0),
- KEY(3,5,KEY_KPSLASH),
- KEY(4,0,KEY_HOME),
- KEY(4,1,KEY_1),
- KEY(4,2,KEY_4),
- KEY(4,3,KEY_7),
- KEY(4,4,KEY_KPASTERISK),
- KEY(4,5,KEY_POWER),
- 0
+static const unsigned int p2_keymap[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(1, 0, KEY_RIGHT),
+ KEY(2, 0, KEY_LEFT),
+ KEY(3, 0, KEY_DOWN),
+ KEY(4, 0, KEY_ENTER),
+ KEY(0, 1, KEY_F10),
+ KEY(1, 1, KEY_SEND),
+ KEY(2, 1, KEY_END),
+ KEY(3, 1, KEY_VOLUMEDOWN),
+ KEY(4, 1, KEY_VOLUMEUP),
+ KEY(5, 1, KEY_RECORD),
+ KEY(0, 2, KEY_F9),
+ KEY(1, 2, KEY_3),
+ KEY(2, 2, KEY_6),
+ KEY(3, 2, KEY_9),
+ KEY(4, 2, KEY_KPDOT),
+ KEY(0, 3, KEY_BACK),
+ KEY(1, 3, KEY_2),
+ KEY(2, 3, KEY_5),
+ KEY(3, 3, KEY_8),
+ KEY(4, 3, KEY_0),
+ KEY(5, 3, KEY_KPSLASH),
+ KEY(0, 4, KEY_HOME),
+ KEY(1, 4, KEY_1),
+ KEY(2, 4, KEY_4),
+ KEY(3, 4, KEY_7),
+ KEY(4, 4, KEY_KPASTERISK),
+ KEY(5, 4, KEY_POWER),
};
static struct smc91x_platdata smc91x_info = {
@@ -211,13 +210,17 @@
},
};
+static const struct matrix_keymap_data p2_keymap_data = {
+ .keymap = p2_keymap,
+ .keymap_size = ARRAY_SIZE(p2_keymap),
+};
+
static struct omap_kp_platform_data kp_data = {
.rows = 8,
.cols = 8,
- .keymap = p2_keymap,
- .keymapsize = ARRAY_SIZE(p2_keymap),
+ .keymap_data = &p2_keymap_data,
.delay = 4,
- .dbounce = 1,
+ .dbounce = true,
};
static struct platform_device kp_device = {
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 463862c6..d41fe2d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -164,36 +164,35 @@
/*----------- Keypad -------------------------*/
-static int sx1_keymap[] = {
- KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */
- KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
- KEY(1, 4, GROUP_2 | 114), /* voice memo */
- KEY(2, 4, GROUP_3 | 114), /* voice memo */
+static const unsigned int sx1_keymap[] = {
+ KEY(3, 5, GROUP_0 | 117), /* camera Qt::Key_F17 */
+ KEY(4, 0, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
+ KEY(4, 1, GROUP_2 | 114), /* voice memo */
+ KEY(4, 2, GROUP_3 | 114), /* voice memo */
KEY(0, 0, GROUP_1 | KEY_F12), /* red button Qt::Key_Hangup */
- KEY(4, 3, GROUP_1 | KEY_LEFT),
- KEY(2, 3, GROUP_1 | KEY_DOWN),
- KEY(1, 3, GROUP_1 | KEY_RIGHT),
- KEY(0, 3, GROUP_1 | KEY_UP),
+ KEY(3, 4, GROUP_1 | KEY_LEFT),
+ KEY(3, 2, GROUP_1 | KEY_DOWN),
+ KEY(3, 1, GROUP_1 | KEY_RIGHT),
+ KEY(3, 0, GROUP_1 | KEY_UP),
KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
- KEY(5, 0, GROUP_1 | KEY_1),
- KEY(4, 0, GROUP_1 | KEY_2),
- KEY(3, 0, GROUP_1 | KEY_3),
- KEY(3, 4, GROUP_1 | KEY_4),
+ KEY(0, 5, GROUP_1 | KEY_1),
+ KEY(0, 4, GROUP_1 | KEY_2),
+ KEY(0, 3, GROUP_1 | KEY_3),
+ KEY(4, 3, GROUP_1 | KEY_4),
KEY(4, 4, GROUP_1 | KEY_5),
- KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */
- KEY(4, 1, GROUP_1 | KEY_6),
- KEY(5, 1, GROUP_1 | KEY_7),
- KEY(3, 1, GROUP_1 | KEY_8),
- KEY(3, 2, GROUP_1 | KEY_9),
- KEY(5, 2, GROUP_1 | KEY_0),
- KEY(4, 2, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
- KEY(0, 1, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */
- KEY(1, 2, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */
+ KEY(4, 5, GROUP_1 | KEY_KPASTERISK),/* "*" */
+ KEY(1, 4, GROUP_1 | KEY_6),
+ KEY(1, 5, GROUP_1 | KEY_7),
+ KEY(1, 3, GROUP_1 | KEY_8),
+ KEY(2, 3, GROUP_1 | KEY_9),
+ KEY(2, 5, GROUP_1 | KEY_0),
+ KEY(2, 4, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
+ KEY(1, 0, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */
+ KEY(2, 1, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */
KEY(2, 2, GROUP_1 | KEY_F8), /* right soft Qt::Key_Back */
- KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */
+ KEY(1, 2, GROUP_1 | KEY_LEFTSHIFT), /* shift */
KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
- KEY(0, 2, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */
- 0
+ KEY(2, 0, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */
};
static struct resource sx1_kp_resources[] = {
@@ -204,11 +203,15 @@
},
};
+static const struct matrix_keymap_data sx1_keymap_data = {
+ .keymap = sx1_keymap,
+ .keymap_size = ARRAY_SIZE(sx1_keymap),
+};
+
static struct omap_kp_platform_data sx1_kp_data = {
.rows = 6,
.cols = 6,
- .keymap = sx1_keymap,
- .keymapsize = ARRAY_SIZE(sx1_keymap),
+ .keymap_data = &sx1_keymap_data,
.delay = 80,
};
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
new file mode 100644
index 0000000..d855934
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.c
@@ -0,0 +1,390 @@
+/*
+ * OMAP1/OMAP7xx - specific DMA driver
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into platform driver
+ * - G, Manjunath Kondaiah <manjugk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/irqs.h>
+
+#define OMAP1_DMA_BASE (0xfffed800)
+#define OMAP1_LOGICAL_DMA_CH_COUNT 17
+#define OMAP1_DMA_STRIDE 0x40
+
+static u32 errata;
+static u32 enable_1510_mode;
+static u8 dma_stride;
+static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
+
+static u16 reg_map[] = {
+ [GCR] = 0x400,
+ [GSCR] = 0x404,
+ [GRST1] = 0x408,
+ [HW_ID] = 0x442,
+ [PCH2_ID] = 0x444,
+ [PCH0_ID] = 0x446,
+ [PCH1_ID] = 0x448,
+ [PCHG_ID] = 0x44a,
+ [PCHD_ID] = 0x44c,
+ [CAPS_0] = 0x44e,
+ [CAPS_1] = 0x452,
+ [CAPS_2] = 0x456,
+ [CAPS_3] = 0x458,
+ [CAPS_4] = 0x45a,
+ [PCH2_SR] = 0x460,
+ [PCH0_SR] = 0x480,
+ [PCH1_SR] = 0x482,
+ [PCHD_SR] = 0x4c0,
+
+ /* Common Registers */
+ [CSDP] = 0x00,
+ [CCR] = 0x02,
+ [CICR] = 0x04,
+ [CSR] = 0x06,
+ [CEN] = 0x10,
+ [CFN] = 0x12,
+ [CSFI] = 0x14,
+ [CSEI] = 0x16,
+ [CPC] = 0x18, /* 15xx only */
+ [CSAC] = 0x18,
+ [CDAC] = 0x1a,
+ [CDEI] = 0x1c,
+ [CDFI] = 0x1e,
+ [CLNK_CTRL] = 0x28,
+
+ /* Channel specific register offsets */
+ [CSSA] = 0x08,
+ [CDSA] = 0x0c,
+ [COLOR] = 0x20,
+ [CCR2] = 0x24,
+ [LCH_CTRL] = 0x2a,
+};
+
+static struct resource res[] __initdata = {
+ [0] = {
+ .start = OMAP1_DMA_BASE,
+ .end = OMAP1_DMA_BASE + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "0",
+ .start = INT_DMA_CH0_6,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "1",
+ .start = INT_DMA_CH1_7,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .name = "2",
+ .start = INT_DMA_CH2_8,
+ .flags = IORESOURCE_IRQ,
+ },
+ [4] = {
+ .name = "3",
+ .start = INT_DMA_CH3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [5] = {
+ .name = "4",
+ .start = INT_DMA_CH4,
+ .flags = IORESOURCE_IRQ,
+ },
+ [6] = {
+ .name = "5",
+ .start = INT_DMA_CH5,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* Handled in lcd_dma.c */
+ [7] = {
+ .name = "6",
+ .start = INT_1610_DMA_CH6,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* irq's for omap16xx and omap7xx */
+ [8] = {
+ .name = "7",
+ .start = INT_1610_DMA_CH7,
+ .flags = IORESOURCE_IRQ,
+ },
+ [9] = {
+ .name = "8",
+ .start = INT_1610_DMA_CH8,
+ .flags = IORESOURCE_IRQ,
+ },
+ [10] = {
+ .name = "9",
+ .start = INT_1610_DMA_CH9,
+ .flags = IORESOURCE_IRQ,
+ },
+ [11] = {
+ .name = "10",
+ .start = INT_1610_DMA_CH10,
+ .flags = IORESOURCE_IRQ,
+ },
+ [12] = {
+ .name = "11",
+ .start = INT_1610_DMA_CH11,
+ .flags = IORESOURCE_IRQ,
+ },
+ [13] = {
+ .name = "12",
+ .start = INT_1610_DMA_CH12,
+ .flags = IORESOURCE_IRQ,
+ },
+ [14] = {
+ .name = "13",
+ .start = INT_1610_DMA_CH13,
+ .flags = IORESOURCE_IRQ,
+ },
+ [15] = {
+ .name = "14",
+ .start = INT_1610_DMA_CH14,
+ .flags = IORESOURCE_IRQ,
+ },
+ [16] = {
+ .name = "15",
+ .start = INT_1610_DMA_CH15,
+ .flags = IORESOURCE_IRQ,
+ },
+ [17] = {
+ .name = "16",
+ .start = INT_DMA_LCD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static void __iomem *dma_base;
+static inline void dma_write(u32 val, int reg, int lch)
+{
+ u8 stride;
+ u32 offset;
+
+ stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+ offset = reg_map[reg] + (stride * lch);
+
+ __raw_writew(val, dma_base + offset);
+ if ((reg > CLNK_CTRL && reg < CCEN) ||
+ (reg > PCHD_ID && reg < CAPS_2)) {
+ u32 offset2 = reg_map[reg] + 2 + (stride * lch);
+ __raw_writew(val >> 16, dma_base + offset2);
+ }
+}
+
+static inline u32 dma_read(int reg, int lch)
+{
+ u8 stride;
+ u32 offset, val;
+
+ stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+ offset = reg_map[reg] + (stride * lch);
+
+ val = __raw_readw(dma_base + offset);
+ if ((reg > CLNK_CTRL && reg < CCEN) ||
+ (reg > PCHD_ID && reg < CAPS_2)) {
+ u16 upper;
+ u32 offset2 = reg_map[reg] + 2 + (stride * lch);
+ upper = __raw_readw(dma_base + offset2);
+ val |= (upper << 16);
+ }
+ return val;
+}
+
+static void omap1_clear_lch_regs(int lch)
+{
+ int i = dma_common_ch_start;
+
+ for (; i <= dma_common_ch_end; i += 1)
+ dma_write(0, i, lch);
+}
+
+static void omap1_clear_dma(int lch)
+{
+ u32 l;
+
+ l = dma_read(CCR, lch);
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR, lch);
+
+ /* Clear pending interrupts */
+ l = dma_read(CSR, lch);
+}
+
+static void omap1_show_dma_caps(void)
+{
+ if (enable_1510_mode) {
+ printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
+ } else {
+ u16 w;
+ printk(KERN_INFO "OMAP DMA hardware version %d\n",
+ dma_read(HW_ID, 0));
+ printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
+ dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
+ dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
+ dma_read(CAPS_4, 0));
+
+ /* Disable OMAP 3.0/3.1 compatibility mode. */
+ w = dma_read(GSCR, 0);
+ w |= 1 << 3;
+ dma_write(w, GSCR, 0);
+ }
+ return;
+}
+
+static u32 configure_dma_errata(void)
+{
+
+ /*
+ * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
+ * read before the DMA controller finished disabling the channel.
+ */
+ if (!cpu_is_omap15xx())
+ SET_DMA_ERRATA(DMA_ERRATA_3_3);
+
+ return errata;
+}
+
+static int __init omap1_system_dma_init(void)
+{
+ struct omap_system_dma_plat_info *p;
+ struct omap_dma_dev_attr *d;
+ struct platform_device *pdev;
+ int ret;
+
+ pdev = platform_device_alloc("omap_dma_system", 0);
+ if (!pdev) {
+ pr_err("%s: Unable to device alloc for dma\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ dma_base = ioremap(res[0].start, resource_size(&res[0]));
+ if (!dma_base) {
+ pr_err("%s: Unable to ioremap\n", __func__);
+ return -ENODEV;
+ }
+
+ ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+ __func__, pdev->name, pdev->id);
+ goto exit_device_del;
+ }
+
+ p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
+ if (!p) {
+ dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
+ __func__, pdev->name);
+ ret = -ENOMEM;
+ goto exit_device_put;
+ }
+
+ d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
+ if (!d) {
+ dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
+ __func__, pdev->name);
+ ret = -ENOMEM;
+ goto exit_release_p;
+ }
+
+ d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
+
+ /* Valid attributes for omap1 plus processors */
+ if (cpu_is_omap15xx())
+ d->dev_caps = ENABLE_1510_MODE;
+ enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+
+ d->dev_caps |= SRC_PORT;
+ d->dev_caps |= DST_PORT;
+ d->dev_caps |= SRC_INDEX;
+ d->dev_caps |= DST_INDEX;
+ d->dev_caps |= IS_BURST_ONLY4;
+ d->dev_caps |= CLEAR_CSR_ON_READ;
+ d->dev_caps |= IS_WORD_16;
+
+
+ d->chan = kzalloc(sizeof(struct omap_dma_lch) *
+ (d->lch_count), GFP_KERNEL);
+ if (!d->chan) {
+ dev_err(&pdev->dev, "%s: Memory allocation failed"
+ "for d->chan!!!\n", __func__);
+ goto exit_release_d;
+ }
+
+ if (cpu_is_omap15xx())
+ d->chan_count = 9;
+ else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
+ if (!(d->dev_caps & ENABLE_1510_MODE))
+ d->chan_count = 16;
+ else
+ d->chan_count = 9;
+ }
+
+ p->dma_attr = d;
+
+ p->show_dma_caps = omap1_show_dma_caps;
+ p->clear_lch_regs = omap1_clear_lch_regs;
+ p->clear_dma = omap1_clear_dma;
+ p->dma_write = dma_write;
+ p->dma_read = dma_read;
+ p->disable_irq_lch = NULL;
+
+ p->errata = configure_dma_errata();
+
+ ret = platform_device_add_data(pdev, p, sizeof(*p));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+ __func__, pdev->name, pdev->id);
+ goto exit_release_chan;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+ __func__, pdev->name, pdev->id);
+ goto exit_release_chan;
+ }
+
+ dma_stride = OMAP1_DMA_STRIDE;
+ dma_common_ch_start = CPC;
+ dma_common_ch_end = COLOR;
+
+ return ret;
+
+exit_release_chan:
+ kfree(d->chan);
+exit_release_d:
+ kfree(d);
+exit_release_p:
+ kfree(p);
+exit_device_put:
+ platform_device_put(pdev);
+exit_device_del:
+ platform_device_del(pdev);
+
+ return ret;
+}
+arch_initcall(omap1_system_dma_init);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 92b004b..3e8c9e8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -35,6 +35,8 @@
select CPU_V7
select USB_ARCH_HAS_EHCI
select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
+ select ARCH_HAS_OPP
+ select PM_OPP if PM
config ARCH_OMAP4
bool "TI OMAP4"
@@ -44,6 +46,8 @@
select ARM_GIC
select PL310_ERRATA_588369
select ARM_ERRATA_720789
+ select ARCH_HAS_OPP
+ select PM_OPP if PM
comment "OMAP Core Type"
depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b86b062..1b699d3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
- common.o gpio.o
+ common.o gpio.o dma.o
omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o
hwmod-common = omap_hwmod.o \
@@ -49,6 +49,13 @@
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
+# OPP table initialization
+ifeq ($(CONFIG_PM_OPP),y)
+obj-y += opp.o
+obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
+endif
+
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index a30a7fc..7392c67 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -118,27 +118,27 @@
twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 1);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 0);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 1);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value(dssdev->reset_gpio, 0);
+ gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static struct regulator_consumer_supply devkit8000_vmmc1_supply =
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0a2d73c..b386a40 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -51,38 +51,37 @@
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
-static int h4_keymap[] = {
+static const unsigned int h4_keymap[] = {
KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_A),
- KEY(0, 3, KEY_B),
- KEY(0, 4, KEY_C),
- KEY(1, 0, KEY_DOWN),
+ KEY(1, 0, KEY_RIGHT),
+ KEY(2, 0, KEY_A),
+ KEY(3, 0, KEY_B),
+ KEY(4, 0, KEY_C),
+ KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_F),
- KEY(1, 4, KEY_G),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_I),
+ KEY(2, 1, KEY_E),
+ KEY(3, 1, KEY_F),
+ KEY(4, 1, KEY_G),
+ KEY(0, 2, KEY_ENTER),
+ KEY(1, 2, KEY_I),
KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_K),
- KEY(2, 4, KEY_3),
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
+ KEY(3, 2, KEY_K),
+ KEY(4, 2, KEY_3),
+ KEY(0, 3, KEY_M),
+ KEY(1, 3, KEY_N),
+ KEY(2, 3, KEY_O),
KEY(3, 3, KEY_P),
- KEY(3, 4, KEY_Q),
- KEY(4, 0, KEY_R),
- KEY(4, 1, KEY_4),
- KEY(4, 2, KEY_T),
- KEY(4, 3, KEY_U),
+ KEY(4, 3, KEY_Q),
+ KEY(0, 4, KEY_R),
+ KEY(1, 4, KEY_4),
+ KEY(2, 4, KEY_T),
+ KEY(3, 4, KEY_U),
KEY(4, 4, KEY_ENTER),
- KEY(5, 0, KEY_V),
- KEY(5, 1, KEY_W),
- KEY(5, 2, KEY_L),
- KEY(5, 3, KEY_S),
- KEY(5, 4, KEY_ENTER),
- 0
+ KEY(0, 5, KEY_V),
+ KEY(1, 5, KEY_W),
+ KEY(2, 5, KEY_L),
+ KEY(3, 5, KEY_S),
+ KEY(4, 5, KEY_ENTER),
};
static struct mtd_partition h4_partitions[] = {
@@ -136,12 +135,16 @@
.resource = &h4_flash_resource,
};
+static const struct matrix_keymap_data h4_keymap_data = {
+ .keymap = h4_keymap,
+ .keymap_size = ARRAY_SIZE(h4_keymap),
+};
+
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
- .keymap = h4_keymap,
- .keymapsize = ARRAY_SIZE(h4_keymap),
- .rep = 1,
+ .keymap_data = &h4_keymap_data,
+ .rep = true,
.row_gpios = row_gpios,
.col_gpios = col_gpios,
};
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index b82f231..d4a9aa4 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -142,6 +142,7 @@
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
+ .gpio_cd = -EINVAL,
},
{} /* Terminator */
};
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index fd95ccf..e75e240 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -359,17 +359,12 @@
REGULATOR_SUPPLY("DVDD", "2-0019"),
};
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-extern struct platform_device rx51_display_device;
-#endif
-
static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
- {
- .supply = "vdds_sdi",
- .dev = &rx51_display_device.dev,
- },
-#endif
+ REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+};
+
+static struct regulator_consumer_supply rx51_vdac_supply[] = {
+ REGULATOR_SUPPLY("vdda_dac", "omapdss"),
};
static struct regulator_init_data rx51_vaux1 = {
@@ -489,14 +484,17 @@
static struct regulator_init_data rx51_vdac = {
.constraints = {
+ .name = "VDAC",
.min_uV = 1800000,
.max_uV = 1800000,
+ .apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = rx51_vdac_supply,
};
static struct regulator_init_data rx51_vio = {
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 9919581..acd6700 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -24,9 +24,6 @@
#include "mux.h"
#define RX51_LCD_RESET_GPIO 90
-/* REVISIT to verify with rx51.c at sound/soc/omap */
-#define RX51_TVOUT_SEL_GPIO 40
-
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -41,17 +38,6 @@
gpio_set_value(dssdev->reset_gpio, 0);
}
-static int rx51_tvout_enable(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void rx51_tvout_disable(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 0);
-}
-
static struct omap_dss_device rx51_lcd_device = {
.name = "lcd",
.driver_name = "panel-acx565akm",
@@ -67,9 +53,6 @@
.type = OMAP_DISPLAY_TYPE_VENC,
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
- .reset_gpio = RX51_TVOUT_SEL_GPIO,
- .platform_enable = rx51_tvout_enable,
- .platform_disable = rx51_tvout_disable,
};
static struct omap_dss_device *rx51_dss_devices[] = {
@@ -112,9 +95,6 @@
gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
- /* REVISIT to verify with rx51.c at sound/soc/omap */
- gpio_direction_output(RX51_TVOUT_SEL_GPIO, 1);
-
platform_add_devices(rx51_video_devices,
ARRAY_SIZE(rx51_video_devices));
return 0;
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 1fa3294..0269bb0 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -239,9 +239,19 @@
struct omap3_scratchpad_prcm_block prcm_block_contents;
struct omap3_scratchpad_sdrc_block sdrc_block_contents;
- /* Populate the Scratchpad contents */
+ /*
+ * Populate the Scratchpad contents
+ *
+ * The "get_*restore_pointer" functions are used to provide a
+ * physical restore address where the ROM code jumps while waking
+ * up from MPU OFF/OSWR state.
+ * The restore pointer is stored into the scratchpad.
+ */
scratchpad_contents.boot_config_ptr = 0x0;
- if (omap_rev() != OMAP3430_REV_ES3_0 &&
+ if (cpu_is_omap3630())
+ scratchpad_contents.public_restore_ptr =
+ virt_to_phys(get_omap3630_restore_pointer());
+ else if (omap_rev() != OMAP3430_REV_ES3_0 &&
omap_rev() != OMAP3430_REV_ES3_1)
scratchpad_contents.public_restore_ptr =
virt_to_phys(get_restore_pointer());
@@ -474,4 +484,12 @@
omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
return;
}
+
+void omap3630_ctrl_disable_rta(void)
+{
+ if (!cpu_is_omap3630())
+ return;
+ omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
+}
+
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b6c6b7c..ea20dc3 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -204,6 +204,10 @@
#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
+/* 36xx-only RTA - Retention till Accesss control registers and bits */
+#define OMAP36XX_CONTROL_MEM_RTA_CTRL 0x40C
+#define OMAP36XX_RTA_DISABLE 0x0
+
/* 34xx D2D idle-related pins, handled by PM core */
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
@@ -270,6 +274,8 @@
#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860)
#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910)
#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C
+#define OMAP343X_SCRATCHPAD_REGADDR(reg) OMAP2_L4_IO_ADDRESS(\
+ OMAP343X_SCRATCHPAD + reg)
/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0
@@ -309,7 +315,7 @@
#define FEAT_SGX_NONE 2
#define OMAP3_IVA_SHIFT 12
-#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT)
+#define OMAP3_IVA_MASK (1 << OMAP3_IVA_SHIFT)
#define FEAT_IVA 0
#define FEAT_IVA_NONE 1
@@ -347,10 +353,11 @@
extern void omap3_clear_scratchpad_contents(void);
extern u32 *get_restore_pointer(void);
extern u32 *get_es3_restore_pointer(void);
+extern u32 *get_omap3630_restore_pointer(void);
extern u32 omap3_arm_context[128];
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
-
+extern void omap3630_ctrl_disable_rta(void);
#else
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 0d50b45..0fb619c 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -293,25 +293,26 @@
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
/**
- * omap3_cpuidle_update_states - Update the cpuidle states.
+ * omap3_cpuidle_update_states() - Update the cpuidle states
+ * @mpu_deepest_state: Enable states upto and including this for mpu domain
+ * @core_deepest_state: Enable states upto and including this for core domain
*
- * Currently, this function toggles the validity of idle states based upon
- * the flag 'enable_off_mode'. When the flag is set all states are valid.
- * Else, states leading to OFF state set to be invalid.
+ * This goes through the list of states available and enables and disables the
+ * validity of C states based on deepest state that can be achieved for the
+ * variable domain
*/
-void omap3_cpuidle_update_states(void)
+void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state)
{
int i;
for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
struct omap3_processor_cx *cx = &omap3_power_states[i];
- if (enable_off_mode) {
+ if ((cx->mpu_state >= mpu_deepest_state) &&
+ (cx->core_state >= core_deepest_state)) {
cx->valid = 1;
} else {
- if ((cx->mpu_state == PWRDM_POWER_OFF) ||
- (cx->core_state == PWRDM_POWER_OFF))
- cx->valid = 0;
+ cx->valid = 0;
}
}
}
@@ -452,6 +453,18 @@
omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
+
+ /*
+ * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
+ * enable OFF mode in a stable form for previous revisions.
+ * we disable C7 state as a result.
+ */
+ if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) {
+ omap3_power_states[OMAP3_STATE_C7].valid = 0;
+ cpuidle_params_table[OMAP3_STATE_C7].valid = 0;
+ WARN_ONCE(1, "%s: core off state C7 disabled due to i583\n",
+ __func__);
+ }
}
struct cpuidle_driver omap3_idle_driver = {
@@ -504,7 +517,10 @@
return -EINVAL;
dev->state_count = count;
- omap3_cpuidle_update_states();
+ if (enable_off_mode)
+ omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF);
+ else
+ omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET);
if (cpuidle_register_device(dev)) {
printk(KERN_ERR "%s: CPUidle register device failed\n",
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
new file mode 100644
index 0000000..d2f15f5
--- /dev/null
+++ b/arch/arm/mach-omap2/dma.c
@@ -0,0 +1,297 @@
+/*
+ * OMAP2+ DMA driver
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into platform driver
+ * - G, Manjunath Kondaiah <manjugk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/dma.h>
+
+#define OMAP2_DMA_STRIDE 0x60
+
+static u32 errata;
+static u8 dma_stride;
+
+static struct omap_dma_dev_attr *d;
+
+static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
+
+static u16 reg_map[] = {
+ [REVISION] = 0x00,
+ [GCR] = 0x78,
+ [IRQSTATUS_L0] = 0x08,
+ [IRQSTATUS_L1] = 0x0c,
+ [IRQSTATUS_L2] = 0x10,
+ [IRQSTATUS_L3] = 0x14,
+ [IRQENABLE_L0] = 0x18,
+ [IRQENABLE_L1] = 0x1c,
+ [IRQENABLE_L2] = 0x20,
+ [IRQENABLE_L3] = 0x24,
+ [SYSSTATUS] = 0x28,
+ [OCP_SYSCONFIG] = 0x2c,
+ [CAPS_0] = 0x64,
+ [CAPS_2] = 0x6c,
+ [CAPS_3] = 0x70,
+ [CAPS_4] = 0x74,
+
+ /* Common register offsets */
+ [CCR] = 0x80,
+ [CLNK_CTRL] = 0x84,
+ [CICR] = 0x88,
+ [CSR] = 0x8c,
+ [CSDP] = 0x90,
+ [CEN] = 0x94,
+ [CFN] = 0x98,
+ [CSEI] = 0xa4,
+ [CSFI] = 0xa8,
+ [CDEI] = 0xac,
+ [CDFI] = 0xb0,
+ [CSAC] = 0xb4,
+ [CDAC] = 0xb8,
+
+ /* Channel specific register offsets */
+ [CSSA] = 0x9c,
+ [CDSA] = 0xa0,
+ [CCEN] = 0xbc,
+ [CCFN] = 0xc0,
+ [COLOR] = 0xc4,
+
+ /* OMAP4 specific registers */
+ [CDP] = 0xd0,
+ [CNDP] = 0xd4,
+ [CCDN] = 0xd8,
+};
+
+static struct omap_device_pm_latency omap2_dma_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+static void __iomem *dma_base;
+static inline void dma_write(u32 val, int reg, int lch)
+{
+ u8 stride;
+ u32 offset;
+
+ stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+ offset = reg_map[reg] + (stride * lch);
+ __raw_writel(val, dma_base + offset);
+}
+
+static inline u32 dma_read(int reg, int lch)
+{
+ u8 stride;
+ u32 offset, val;
+
+ stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+ offset = reg_map[reg] + (stride * lch);
+ val = __raw_readl(dma_base + offset);
+ return val;
+}
+
+static inline void omap2_disable_irq_lch(int lch)
+{
+ u32 val;
+
+ val = dma_read(IRQENABLE_L0, lch);
+ val &= ~(1 << lch);
+ dma_write(val, IRQENABLE_L0, lch);
+}
+
+static void omap2_clear_dma(int lch)
+{
+ int i = dma_common_ch_start;
+
+ for (; i <= dma_common_ch_end; i += 1)
+ dma_write(0, i, lch);
+}
+
+static void omap2_show_dma_caps(void)
+{
+ u8 revision = dma_read(REVISION, 0) & 0xff;
+ printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
+ revision >> 4, revision & 0xf);
+ return;
+}
+
+static u32 configure_dma_errata(void)
+{
+
+ /*
+ * Errata applicable for OMAP2430ES1.0 and all omap2420
+ *
+ * I.
+ * Erratum ID: Not Available
+ * Inter Frame DMA buffering issue DMA will wrongly
+ * buffer elements if packing and bursting is enabled. This might
+ * result in data gets stalled in FIFO at the end of the block.
+ * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
+ * guarantee no data will stay in the DMA FIFO in case inter frame
+ * buffering occurs
+ *
+ * II.
+ * Erratum ID: Not Available
+ * DMA may hang when several channels are used in parallel
+ * In the following configuration, DMA channel hanging can occur:
+ * a. Channel i, hardware synchronized, is enabled
+ * b. Another channel (Channel x), software synchronized, is enabled.
+ * c. Channel i is disabled before end of transfer
+ * d. Channel i is reenabled.
+ * e. Steps 1 to 4 are repeated a certain number of times.
+ * f. A third channel (Channel y), software synchronized, is enabled.
+ * Channel x and Channel y may hang immediately after step 'f'.
+ * Workaround:
+ * For any channel used - make sure NextLCH_ID is set to the value j.
+ */
+ if (cpu_is_omap2420() || (cpu_is_omap2430() &&
+ (omap_type() == OMAP2430_REV_ES1_0))) {
+
+ SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING);
+ SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS);
+ }
+
+ /*
+ * Erratum ID: i378: OMAP2+: sDMA Channel is not disabled
+ * after a transaction error.
+ * Workaround: SW should explicitely disable the channel.
+ */
+ if (cpu_class_is_omap2())
+ SET_DMA_ERRATA(DMA_ERRATA_i378);
+
+ /*
+ * Erratum ID: i541: sDMA FIFO draining does not finish
+ * If sDMA channel is disabled on the fly, sDMA enters standby even
+ * through FIFO Drain is still in progress
+ * Workaround: Put sDMA in NoStandby more before a logical channel is
+ * disabled, then put it back to SmartStandby right after the channel
+ * finishes FIFO draining.
+ */
+ if (cpu_is_omap34xx())
+ SET_DMA_ERRATA(DMA_ERRATA_i541);
+
+ /*
+ * Erratum ID: i88 : Special programming model needed to disable DMA
+ * before end of block.
+ * Workaround: software must ensure that the DMA is configured in No
+ * Standby mode(DMAx_OCP_SYSCONFIG.MIDLEMODE = "01")
+ */
+ if (omap_type() == OMAP3430_REV_ES1_0)
+ SET_DMA_ERRATA(DMA_ERRATA_i88);
+
+ /*
+ * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
+ * read before the DMA controller finished disabling the channel.
+ */
+ SET_DMA_ERRATA(DMA_ERRATA_3_3);
+
+ /*
+ * Erratum ID: Not Available
+ * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
+ * after secure sram context save and restore.
+ * Work around: Hence we need to manually clear those IRQs to avoid
+ * spurious interrupts. This affects only secure devices.
+ */
+ if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+ SET_DMA_ERRATA(DMA_ROMCODE_BUG);
+
+ return errata;
+}
+
+/* One time initializations */
+static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
+{
+ struct omap_device *od;
+ struct omap_system_dma_plat_info *p;
+ struct resource *mem;
+ char *name = "omap_dma_system";
+
+ dma_stride = OMAP2_DMA_STRIDE;
+ dma_common_ch_start = CSDP;
+ if (cpu_is_omap3630() || cpu_is_omap4430())
+ dma_common_ch_end = CCDN;
+ else
+ dma_common_ch_end = CCFN;
+
+ p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
+ if (!p) {
+ pr_err("%s: Unable to allocate pdata for %s:%s\n",
+ __func__, name, oh->name);
+ return -ENOMEM;
+ }
+
+ p->dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
+ p->disable_irq_lch = omap2_disable_irq_lch;
+ p->show_dma_caps = omap2_show_dma_caps;
+ p->clear_dma = omap2_clear_dma;
+ p->dma_write = dma_write;
+ p->dma_read = dma_read;
+
+ p->clear_lch_regs = NULL;
+
+ p->errata = configure_dma_errata();
+
+ od = omap_device_build(name, 0, oh, p, sizeof(*p),
+ omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+ kfree(p);
+ if (IS_ERR(od)) {
+ pr_err("%s: Cant build omap_device for %s:%s.\n",
+ __func__, name, oh->name);
+ return IS_ERR(od);
+ }
+
+ mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+ return -EINVAL;
+ }
+ dma_base = ioremap(mem->start, resource_size(mem));
+ if (!dma_base) {
+ dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+ return -ENOMEM;
+ }
+
+ d = oh->dev_attr;
+ d->chan = kzalloc(sizeof(struct omap_dma_lch) *
+ (d->lch_count), GFP_KERNEL);
+
+ if (!d->chan) {
+ dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static int __init omap2_system_dma_init(void)
+{
+ return omap_hwmod_for_each_by_class("dma",
+ omap2_system_dma_init_dev, NULL);
+}
+arch_initcall(omap2_system_dma_init);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4605d50..5577ab2 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -347,8 +347,7 @@
else if (cpu_is_omap44xx())
omap44xx_hwmod_init();
- /* The OPP tables have to be registered before a clk init */
- omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
+ omap_pm_if_early_init();
if (cpu_is_omap2420())
omap2420_clk_init();
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index d953425..42606f6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -42,6 +42,7 @@
static struct omap_hwmod omap2420_gpio2_hwmod;
static struct omap_hwmod omap2420_gpio3_hwmod;
static struct omap_hwmod omap2420_gpio4_hwmod;
+static struct omap_hwmod omap2420_dma_system_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
@@ -779,6 +780,88 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
+/* system dma */
+static struct omap_hwmod_class_sysconfig omap2420_dma_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x002c,
+ .syss_offs = 0x0028,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_dma_hwmod_class = {
+ .name = "dma",
+ .sysc = &omap2420_dma_sysc,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32,
+ .lch_count = 32,
+};
+
+static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
+ { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
+ { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
+ { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
+ { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
+};
+
+static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
+ {
+ .pa_start = 0x48056000,
+ .pa_end = 0x4a0560ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
+ .master = &omap2420_dma_system_hwmod,
+ .slave = &omap2420_l3_main_hwmod,
+ .clk = "core_l3_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap2420_dma_system_masters[] = {
+ &omap2420_dma_system__l3,
+};
+
+/* l4_core -> dma_system */
+static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
+ .master = &omap2420_l4_core_hwmod,
+ .slave = &omap2420_dma_system_hwmod,
+ .clk = "sdma_ick",
+ .addr = omap2420_dma_system_addrs,
+ .addr_cnt = ARRAY_SIZE(omap2420_dma_system_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = {
+ &omap2420_l4_core__dma_system,
+};
+
+static struct omap_hwmod omap2420_dma_system_hwmod = {
+ .name = "dma",
+ .class = &omap2420_dma_hwmod_class,
+ .mpu_irqs = omap2420_dma_system_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dma_system_irqs),
+ .main_clk = "core_l3_ck",
+ .slaves = omap2420_dma_system_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2420_dma_system_slaves),
+ .masters = omap2420_dma_system_masters,
+ .masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
+ .dev_attr = &dma_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+ .flags = HWMOD_NO_IDLEST,
+};
+
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_l3_main_hwmod,
&omap2420_l4_core_hwmod,
@@ -797,6 +880,9 @@
&omap2420_gpio2_hwmod,
&omap2420_gpio3_hwmod,
&omap2420_gpio4_hwmod,
+
+ /* dma_system class*/
+ &omap2420_dma_system_hwmod,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index ab1d662..3315d24 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -43,6 +43,7 @@
static struct omap_hwmod omap2430_gpio3_hwmod;
static struct omap_hwmod omap2430_gpio4_hwmod;
static struct omap_hwmod omap2430_gpio5_hwmod;
+static struct omap_hwmod omap2430_dma_system_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
@@ -838,6 +839,88 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
+/* dma_system */
+static struct omap_hwmod_class_sysconfig omap2430_dma_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x002c,
+ .syss_offs = 0x0028,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2430_dma_hwmod_class = {
+ .name = "dma",
+ .sysc = &omap2430_dma_sysc,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+ .lch_count = 32,
+};
+
+static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
+ { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
+ { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
+ { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
+ { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
+};
+
+static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
+ {
+ .pa_start = 0x48056000,
+ .pa_end = 0x4a0560ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
+ .master = &omap2430_dma_system_hwmod,
+ .slave = &omap2430_l3_main_hwmod,
+ .clk = "core_l3_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap2430_dma_system_masters[] = {
+ &omap2430_dma_system__l3,
+};
+
+/* l4_core -> dma_system */
+static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
+ .master = &omap2430_l4_core_hwmod,
+ .slave = &omap2430_dma_system_hwmod,
+ .clk = "sdma_ick",
+ .addr = omap2430_dma_system_addrs,
+ .addr_cnt = ARRAY_SIZE(omap2430_dma_system_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = {
+ &omap2430_l4_core__dma_system,
+};
+
+static struct omap_hwmod omap2430_dma_system_hwmod = {
+ .name = "dma",
+ .class = &omap2430_dma_hwmod_class,
+ .mpu_irqs = omap2430_dma_system_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dma_system_irqs),
+ .main_clk = "core_l3_ck",
+ .slaves = omap2430_dma_system_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap2430_dma_system_slaves),
+ .masters = omap2430_dma_system_masters,
+ .masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters),
+ .dev_attr = &dma_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+ .flags = HWMOD_NO_IDLEST,
+};
+
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_l3_main_hwmod,
&omap2430_l4_core_hwmod,
@@ -857,6 +940,9 @@
&omap2430_gpio3_hwmod,
&omap2430_gpio4_hwmod,
&omap2430_gpio5_hwmod,
+
+ /* dma_system class*/
+ &omap2430_dma_system_hwmod,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 2687be1..d5acb63 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -52,6 +52,8 @@
static struct omap_hwmod omap3xxx_gpio5_hwmod;
static struct omap_hwmod omap3xxx_gpio6_hwmod;
+static struct omap_hwmod omap3xxx_dma_system_hwmod;
+
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
.master = &omap3xxx_l3_main_hwmod,
@@ -1090,6 +1092,98 @@
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
+ .master = &omap3xxx_dma_system_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+ .lch_count = 32,
+};
+
+static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x002c,
+ .syss_offs = 0x0028,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
+ .name = "dma",
+ .sysc = &omap3xxx_dma_sysc,
+};
+
+/* dma_system */
+static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
+ { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
+ { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
+ { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
+ { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
+};
+
+static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
+ {
+ .pa_start = 0x48056000,
+ .pa_end = 0x4a0560ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap3xxx_dma_system_masters[] = {
+ &omap3xxx_dma_system__l3,
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_dma_system_hwmod,
+ .clk = "core_l4_ick",
+ .addr = omap3xxx_dma_system_addrs,
+ .addr_cnt = ARRAY_SIZE(omap3xxx_dma_system_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap3xxx_dma_system_slaves[] = {
+ &omap3xxx_l4_core__dma_system,
+};
+
+static struct omap_hwmod omap3xxx_dma_system_hwmod = {
+ .name = "dma",
+ .class = &omap3xxx_dma_hwmod_class,
+ .mpu_irqs = omap3xxx_dma_system_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dma_system_irqs),
+ .main_clk = "core_l3_ick",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_ST_SDMA_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_SDMA_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_dma_system_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_dma_system_slaves),
+ .masters = omap3xxx_dma_system_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters),
+ .dev_attr = &dma_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_NO_IDLEST,
+};
+
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_main_hwmod,
&omap3xxx_l4_core_hwmod,
@@ -1113,6 +1207,9 @@
&omap3xxx_gpio4_hwmod,
&omap3xxx_gpio5_hwmod,
&omap3xxx_gpio6_hwmod,
+
+ /* dma_system class*/
+ &omap3xxx_dma_system_hwmod,
NULL,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index d258936..f9778fb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -23,6 +23,7 @@
#include <plat/omap_hwmod.h>
#include <plat/cpu.h>
#include <plat/gpio.h>
+#include <plat/dma.h>
#include "omap_hwmod_common_data.h"
@@ -36,6 +37,7 @@
#define OMAP44XX_DMA_REQ_START 1
/* Backward references (IPs with Bus Master capability) */
+static struct omap_hwmod omap44xx_dma_system_hwmod;
static struct omap_hwmod omap44xx_dmm_hwmod;
static struct omap_hwmod omap44xx_emif_fw_hwmod;
static struct omap_hwmod omap44xx_l3_instr_hwmod;
@@ -216,6 +218,14 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* dma_system -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
+ .master = &omap44xx_dma_system_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_cfg -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
.master = &omap44xx_l4_cfg_hwmod,
@@ -226,6 +236,7 @@
/* l3_main_2 slave ports */
static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
+ &omap44xx_dma_system__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
};
@@ -1376,6 +1387,93 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
+
+/*
+ * 'dma' class
+ * dma controller for data exchange between memory to memory (i.e. internal or
+ * external memory) and gp peripherals to memory or memory to gp peripherals
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_dma_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x002c,
+ .syss_offs = 0x0028,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+ .lch_count = 32,
+};
+
+static struct omap_hwmod_class omap44xx_dma_hwmod_class = {
+ .name = "dma",
+ .sysc = &omap44xx_dma_sysc,
+};
+
+/* dma_system */
+static struct omap_hwmod_irq_info omap44xx_dma_system_irqs[] = {
+ { .name = "0", .irq = 12 + OMAP44XX_IRQ_GIC_START },
+ { .name = "1", .irq = 13 + OMAP44XX_IRQ_GIC_START },
+ { .name = "2", .irq = 14 + OMAP44XX_IRQ_GIC_START },
+ { .name = "3", .irq = 15 + OMAP44XX_IRQ_GIC_START },
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
+ &omap44xx_dma_system__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
+ {
+ .pa_start = 0x4a056000,
+ .pa_end = 0x4a0560ff,
+ .flags = ADDR_TYPE_RT
+ },
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_dma_system_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dma_system_addrs,
+ .addr_cnt = ARRAY_SIZE(omap44xx_dma_system_addrs),
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = {
+ &omap44xx_l4_cfg__dma_system,
+};
+
+static struct omap_hwmod omap44xx_dma_system_hwmod = {
+ .name = "dma_system",
+ .class = &omap44xx_dma_hwmod_class,
+ .mpu_irqs = omap44xx_dma_system_irqs,
+ .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dma_system_irqs),
+ .main_clk = "l3_div_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_reg = OMAP4430_CM_SDMA_SDMA_CLKCTRL,
+ },
+ },
+ .slaves = omap44xx_dma_system_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
+ .masters = omap44xx_dma_system_masters,
+ .masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
+ .dev_attr = &dma_dev_attr,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* dmm class */
&omap44xx_dmm_hwmod,
@@ -1391,6 +1489,10 @@
&omap44xx_l4_cfg_hwmod,
&omap44xx_l4_per_hwmod,
&omap44xx_l4_wkup_hwmod,
+
+ /* dma class */
+ &omap44xx_dma_system_hwmod,
+
/* i2c class */
&omap44xx_i2c1_hwmod,
&omap44xx_i2c2_hwmod,
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
new file mode 100644
index 0000000..46ac27d
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -0,0 +1,72 @@
+/*
+ * OMAP SoC specific OPP Data helpers
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ * Kevin Hilman
+ * Copyright (C) 2010 Nokia Corporation.
+ * Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
+
+#include <plat/omap_hwmod.h>
+
+/*
+ * *BIG FAT WARNING*:
+ * USE the following ONLY in opp data initialization common to an SoC.
+ * DO NOT USE these in board files/pm core etc.
+ */
+
+/**
+ * struct omap_opp_def - OMAP OPP Definition
+ * @hwmod_name: Name of the hwmod for this domain
+ * @freq: Frequency in hertz corresponding to this OPP
+ * @u_volt: Nominal voltage in microvolts corresponding to this OPP
+ * @default_available: True/false - is this OPP available by default
+ *
+ * OMAP SOCs have a standard set of tuples consisting of frequency and voltage
+ * pairs that the device will support per voltage domain. This is called
+ * Operating Points or OPP. The actual definitions of OMAP Operating Points
+ * varies over silicon within the same family of devices. For a specific
+ * domain, you can have a set of {frequency, voltage} pairs and this is denoted
+ * by an array of omap_opp_def. As the kernel boots and more information is
+ * available, a set of these are activated based on the precise nature of
+ * device the kernel boots up on. It is interesting to remember that each IP
+ * which belongs to a voltage domain may define their own set of OPPs on top
+ * of this - but this is handled by the appropriate driver.
+ */
+struct omap_opp_def {
+ char *hwmod_name;
+
+ unsigned long freq;
+ unsigned long u_volt;
+
+ bool default_available;
+};
+
+/*
+ * Initialization wrapper used to define an OPP for OMAP variants.
+ */
+#define OPP_INITIALIZER(_hwmod_name, _enabled, _freq, _uv) \
+{ \
+ .hwmod_name = _hwmod_name, \
+ .default_available = _enabled, \
+ .freq = _freq, \
+ .u_volt = _uv, \
+}
+
+/* Use this to initialize the default table */
+extern int __init omap_init_opp_table(struct omap_opp_def *opp_def,
+ u32 opp_def_size);
+
+#endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
new file mode 100644
index 0000000..ab8b35b
--- /dev/null
+++ b/arch/arm/mach-omap2/opp.c
@@ -0,0 +1,93 @@
+/*
+ * OMAP SoC specific OPP wrapper function
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ * Kevin Hilman
+ * Copyright (C) 2010 Nokia Corporation.
+ * Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/opp.h>
+
+#include <plat/omap_device.h>
+
+#include "omap_opp_data.h"
+
+/* Temp variable to allow multiple calls */
+static u8 __initdata omap_table_init;
+
+/**
+ * omap_init_opp_table() - Initialize opp table as per the CPU type
+ * @opp_def: opp default list for this silicon
+ * @opp_def_size: number of opp entries for this silicon
+ *
+ * Register the initial OPP table with the OPP library based on the CPU
+ * type. This is meant to be used only by SoC specific registration.
+ */
+int __init omap_init_opp_table(struct omap_opp_def *opp_def,
+ u32 opp_def_size)
+{
+ int i, r;
+
+ if (!opp_def || !opp_def_size) {
+ pr_err("%s: invalid params!\n", __func__);
+ return -EINVAL;
+ }
+
+ /*
+ * Initialize only if not already initialized even if the previous
+ * call failed, because, no reason we'd succeed again.
+ */
+ if (omap_table_init)
+ return -EEXIST;
+ omap_table_init = 1;
+
+ /* Lets now register with OPP library */
+ for (i = 0; i < opp_def_size; i++) {
+ struct omap_hwmod *oh;
+ struct device *dev;
+
+ if (!opp_def->hwmod_name) {
+ pr_err("%s: NULL name of omap_hwmod, failing [%d].\n",
+ __func__, i);
+ return -EINVAL;
+ }
+ oh = omap_hwmod_lookup(opp_def->hwmod_name);
+ if (!oh || !oh->od) {
+ pr_warn("%s: no hwmod or odev for %s, [%d] "
+ "cannot add OPPs.\n", __func__,
+ opp_def->hwmod_name, i);
+ return -EINVAL;
+ }
+ dev = &oh->od->pdev.dev;
+
+ r = opp_add(dev, opp_def->freq, opp_def->u_volt);
+ if (r) {
+ dev_err(dev, "%s: add OPP %ld failed for %s [%d] "
+ "result=%d\n",
+ __func__, opp_def->freq,
+ opp_def->hwmod_name, i, r);
+ } else {
+ if (!opp_def->default_available)
+ r = opp_disable(dev, opp_def->freq);
+ if (r)
+ dev_err(dev, "%s: disable %ld failed for %s "
+ "[%d] result=%d\n",
+ __func__, opp_def->freq,
+ opp_def->hwmod_name, i, r);
+ }
+ opp_def++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
new file mode 100644
index 0000000..0486fce
--- /dev/null
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -0,0 +1,107 @@
+/*
+ * OMAP3 OPP table definitions.
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ * Kevin Hilman
+ * Copyright (C) 2010 Nokia Corporation.
+ * Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include <plat/cpu.h>
+
+#include "omap_opp_data.h"
+
+static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
+ /* MPU OPP1 */
+ OPP_INITIALIZER("mpu", true, 125000000, 975000),
+ /* MPU OPP2 */
+ OPP_INITIALIZER("mpu", true, 250000000, 1075000),
+ /* MPU OPP3 */
+ OPP_INITIALIZER("mpu", true, 500000000, 1200000),
+ /* MPU OPP4 */
+ OPP_INITIALIZER("mpu", true, 550000000, 1270000),
+ /* MPU OPP5 */
+ OPP_INITIALIZER("mpu", true, 600000000, 1350000),
+
+ /*
+ * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is
+ * almost the same than the one at 83MHz thus providing very little
+ * gain for the power point of view. In term of energy it will even
+ * increase the consumption due to the very negative performance
+ * impact that frequency will do to the MPU and the whole system in
+ * general.
+ */
+ OPP_INITIALIZER("l3_main", false, 41500000, 975000),
+ /* L3 OPP2 */
+ OPP_INITIALIZER("l3_main", true, 83000000, 1050000),
+ /* L3 OPP3 */
+ OPP_INITIALIZER("l3_main", true, 166000000, 1150000),
+
+ /* DSP OPP1 */
+ OPP_INITIALIZER("iva", true, 90000000, 975000),
+ /* DSP OPP2 */
+ OPP_INITIALIZER("iva", true, 180000000, 1075000),
+ /* DSP OPP3 */
+ OPP_INITIALIZER("iva", true, 360000000, 1200000),
+ /* DSP OPP4 */
+ OPP_INITIALIZER("iva", true, 400000000, 1270000),
+ /* DSP OPP5 */
+ OPP_INITIALIZER("iva", true, 430000000, 1350000),
+};
+
+static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
+ /* MPU OPP1 - OPP50 */
+ OPP_INITIALIZER("mpu", true, 300000000, 1012500),
+ /* MPU OPP2 - OPP100 */
+ OPP_INITIALIZER("mpu", true, 600000000, 1200000),
+ /* MPU OPP3 - OPP-Turbo */
+ OPP_INITIALIZER("mpu", false, 800000000, 1325000),
+ /* MPU OPP4 - OPP-SB */
+ OPP_INITIALIZER("mpu", false, 1000000000, 1375000),
+
+ /* L3 OPP1 - OPP50 */
+ OPP_INITIALIZER("l3_main", true, 100000000, 1000000),
+ /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
+ OPP_INITIALIZER("l3_main", true, 200000000, 1200000),
+
+ /* DSP OPP1 - OPP50 */
+ OPP_INITIALIZER("iva", true, 260000000, 1012500),
+ /* DSP OPP2 - OPP100 */
+ OPP_INITIALIZER("iva", true, 520000000, 1200000),
+ /* DSP OPP3 - OPP-Turbo */
+ OPP_INITIALIZER("iva", false, 660000000, 1325000),
+ /* DSP OPP4 - OPP-SB */
+ OPP_INITIALIZER("iva", false, 800000000, 1375000),
+};
+
+/**
+ * omap3_opp_init() - initialize omap3 opp table
+ */
+static int __init omap3_opp_init(void)
+{
+ int r = -ENODEV;
+
+ if (!cpu_is_omap34xx())
+ return r;
+
+ if (cpu_is_omap3630())
+ r = omap_init_opp_table(omap36xx_opp_def_list,
+ ARRAY_SIZE(omap36xx_opp_def_list));
+ else
+ r = omap_init_opp_table(omap34xx_opp_def_list,
+ ARRAY_SIZE(omap34xx_opp_def_list));
+
+ return r;
+}
+device_initcall(omap3_opp_init);
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
new file mode 100644
index 0000000..a11fa56
--- /dev/null
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -0,0 +1,57 @@
+/*
+ * OMAP4 OPP table definitions.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ * Kevin Hilman
+ * Thara Gopinath
+ * Copyright (C) 2010 Nokia Corporation.
+ * Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include <plat/cpu.h>
+
+#include "omap_opp_data.h"
+
+static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
+ /* MPU OPP1 - OPP50 */
+ OPP_INITIALIZER("mpu", true, 300000000, 1100000),
+ /* MPU OPP2 - OPP100 */
+ OPP_INITIALIZER("mpu", true, 600000000, 1200000),
+ /* MPU OPP3 - OPP-Turbo */
+ OPP_INITIALIZER("mpu", false, 800000000, 1260000),
+ /* MPU OPP4 - OPP-SB */
+ OPP_INITIALIZER("mpu", false, 1008000000, 1350000),
+ /* L3 OPP1 - OPP50 */
+ OPP_INITIALIZER("l3_main_1", true, 100000000, 930000),
+ /* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
+ OPP_INITIALIZER("l3_main_1", true, 200000000, 1100000),
+ /* TODO: add IVA, DSP, aess, fdif, gpu */
+};
+
+/**
+ * omap4_opp_init() - initialize omap4 opp table
+ */
+static int __init omap4_opp_init(void)
+{
+ int r = -ENODEV;
+
+ if (!cpu_is_omap44xx())
+ return r;
+
+ r = omap_init_opp_table(omap44xx_opp_def_list,
+ ARRAY_SIZE(omap44xx_opp_def_list));
+
+ return r;
+}
+device_initcall(omap4_opp_init);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 59ca03b..6ec2ee1 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -143,5 +143,5 @@
return 0;
}
-device_initcall(omap2_common_pm_init);
+postcore_initcall(omap2_common_pm_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 0d75bfd..8b4f45e 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -20,6 +20,20 @@
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_idle_init(void);
+#if defined(CONFIG_PM_OPP)
+extern int omap3_opp_init(void);
+extern int omap4_opp_init(void);
+#else
+static inline int omap3_opp_init(void)
+{
+ return -EINVAL;
+}
+static inline int omap4_opp_init(void)
+{
+ return -EINVAL;
+}
+#endif
+
struct cpuidle_params {
u8 valid;
u32 sleep_latency;
@@ -58,7 +72,7 @@
#endif
#if defined(CONFIG_CPU_IDLE)
-extern void omap3_cpuidle_update_states(void);
+extern void omap3_cpuidle_update_states(u32, u32);
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
@@ -80,9 +94,20 @@
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
-extern unsigned int omap34xx_suspend_sz;
extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
+#define PM_RTA_ERRATUM_i608 (1 << 0)
+#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+extern u16 pm34xx_errata;
+#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
+extern void enable_omap3630_toggle_l2_on_restore(void);
+#else
+#define IS_PM34XX_ERRATUM(id) 0
+static inline void enable_omap3630_toggle_l2_on_restore(void) { }
+#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
+
#endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index aaeea49..aea7ced 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -301,14 +301,8 @@
static int omap2_pm_begin(suspend_state_t state)
{
- suspend_state = state;
- return 0;
-}
-
-static int omap2_pm_prepare(void)
-{
- /* We cannot sleep in idle until we have resumed */
disable_hlt();
+ suspend_state = state;
return 0;
}
@@ -349,21 +343,15 @@
return ret;
}
-static void omap2_pm_finish(void)
-{
- enable_hlt();
-}
-
static void omap2_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
+ enable_hlt();
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap2_pm_begin,
- .prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
- .finish = omap2_pm_finish,
.end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 648b8c5..c45b4fa 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -68,6 +68,9 @@
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
+/* pm34xx errata defined in pm.h */
+u16 pm34xx_errata;
+
struct power_state {
struct powerdomain *pwrdm;
u32 next_state;
@@ -143,7 +146,7 @@
/*
* Force write last pad into memory, as this can fail in some
- * cases according to erratas 1.157, 1.185
+ * cases according to errata 1.157, 1.185
*/
omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
@@ -430,7 +433,7 @@
/*
* On EMU/HS devices ROM code restores a SRDC value
* from scratchpad which has automatic self refresh on timeout
- * of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
+ * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
* Hence store/restore the SDRC_POWER register here.
*/
if (omap_rev() >= OMAP3430_REV_ES3_0 &&
@@ -529,12 +532,6 @@
}
#ifdef CONFIG_SUSPEND
-static int omap3_pm_prepare(void)
-{
- disable_hlt();
- return 0;
-}
-
static int omap3_pm_suspend(void)
{
struct power_state *pwrst;
@@ -597,14 +594,10 @@
return ret;
}
-static void omap3_pm_finish(void)
-{
- enable_hlt();
-}
-
/* Hooks to enable / disable UART interrupts during suspend */
static int omap3_pm_begin(suspend_state_t state)
{
+ disable_hlt();
suspend_state = state;
omap_uart_enable_irqs(0);
return 0;
@@ -614,15 +607,14 @@
{
suspend_state = PM_SUSPEND_ON;
omap_uart_enable_irqs(1);
+ enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap3_pm_begin,
.end = omap3_pm_end,
- .prepare = omap3_pm_prepare,
.enter = omap3_pm_enter,
- .finish = omap3_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
@@ -925,12 +917,29 @@
state = PWRDM_POWER_RET;
#ifdef CONFIG_CPU_IDLE
- omap3_cpuidle_update_states();
+ /*
+ * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
+ * enable OFF mode in a stable form for previous revisions, restrict
+ * instead to RET
+ */
+ if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
+ omap3_cpuidle_update_states(state, PWRDM_POWER_RET);
+ else
+ omap3_cpuidle_update_states(state, state);
#endif
list_for_each_entry(pwrst, &pwrst_list, node) {
- pwrst->next_state = state;
- omap_set_pwrdm_state(pwrst->pwrdm, state);
+ if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
+ pwrst->pwrdm == core_pwrdm &&
+ state == PWRDM_POWER_OFF) {
+ pwrst->next_state = PWRDM_POWER_RET;
+ WARN_ONCE(1,
+ "%s: Core OFF disabled due to errata i583\n",
+ __func__);
+ } else {
+ pwrst->next_state = state;
+ }
+ omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}
}
@@ -1002,6 +1011,17 @@
save_secure_ram_context_sz);
}
+static void __init pm_errata_configure(void)
+{
+ if (cpu_is_omap3630()) {
+ pm34xx_errata |= PM_RTA_ERRATUM_i608;
+ /* Enable the l2 cache toggling in sleep logic */
+ enable_omap3630_toggle_l2_on_restore();
+ if (omap_rev() < OMAP3630_REV_ES1_2)
+ pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ }
+}
+
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
@@ -1011,6 +1031,8 @@
if (!cpu_is_omap34xx())
return -ENODEV;
+ pm_errata_configure();
+
printk(KERN_ERR "Power Management for TI OMAP3.\n");
/* XXX prcm_setup_regs needs to be before enabling hw
@@ -1058,6 +1080,14 @@
pm_idle = omap3_pm_idle;
omap3_idle_init();
+ /*
+ * RTA is disabled during initialization as per erratum i608
+ * it is safer to disable RTA by the bootloader, but we would like
+ * to be doubly sure here and prevent any mishaps.
+ */
+ if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
+ omap3630_ctrl_disable_rta();
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 54544b4..6aff996 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -31,12 +31,6 @@
static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
-static int omap4_pm_prepare(void)
-{
- disable_hlt();
- return 0;
-}
-
static int omap4_pm_suspend(void)
{
do_wfi();
@@ -59,28 +53,22 @@
return ret;
}
-static void omap4_pm_finish(void)
-{
- enable_hlt();
- return;
-}
-
static int omap4_pm_begin(suspend_state_t state)
{
+ disable_hlt();
return 0;
}
static void omap4_pm_end(void)
{
+ enable_hlt();
return;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap4_pm_begin,
.end = omap4_pm_end,
- .prepare = omap4_pm_prepare,
.enter = omap4_pm_enter,
- .finish = omap4_pm_finish,
.valid = suspend_valid_only_mem,
};
#endif /* CONFIG_SUSPEND */
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 68f57bb..b3f8379 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -74,5 +74,4 @@
*/
#define SDRC_MPURATE_LOOPS 96
-
#endif
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 2fb205a..e3b5cd7 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -1,6 +1,4 @@
/*
- * linux/arch/arm/mach-omap2/sleep.S
- *
* (C) Copyright 2007
* Texas Instruments
* Karthik Dasu <karthik-dp@ti.com>
@@ -26,6 +24,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <plat/sram.h>
#include <mach/io.h>
#include "cm.h"
@@ -33,21 +32,27 @@
#include "sdrc.h"
#include "control.h"
-#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c
-
-#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
- OMAP3430_PM_PREPWSTST)
-#define PM_PREPWSTST_CORE_P 0x48306AE8
-#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
- OMAP3430_PM_PREPWSTST)
+/*
+ * Registers access definitions
+ */
+#define SDRC_SCRATCHPAD_SEM_OFFS 0xc
+#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\
+ (SDRC_SCRATCHPAD_SEM_OFFS)
+#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\
+ OMAP3430_PM_PREPWSTST
#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
-#define SRAM_BASE_P 0x40200000
-#define CONTROL_STAT 0x480022F0
-#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
- * available */
-#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
- + SCRATCHPAD_MEM_OFFS)
+#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
+#define SRAM_BASE_P OMAP3_SRAM_PA
+#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
+#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\
+ OMAP36XX_CONTROL_MEM_RTA_CTRL)
+
+/* Move this as correct place is available */
+#define SCRATCHPAD_MEM_OFFS 0x310
+#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\
+ OMAP343X_CONTROL_MEM_WKUP +\
+ SCRATCHPAD_MEM_OFFS)
#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0)
@@ -59,48 +64,38 @@
#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
- .text
-/* Function to acquire the semaphore in scratchpad */
-ENTRY(lock_scratchpad_sem)
- stmfd sp!, {lr} @ save registers on stack
-wait_sem:
- mov r0,#1
- ldr r1, sdrc_scratchpad_sem
-wait_loop:
- ldr r2, [r1] @ load the lock value
- cmp r2, r0 @ is the lock free ?
- beq wait_loop @ not free...
- swp r2, r0, [r1] @ semaphore free so lock it and proceed
- cmp r2, r0 @ did we succeed ?
- beq wait_sem @ no - try again
- ldmfd sp!, {pc} @ restore regs and return
-sdrc_scratchpad_sem:
- .word SDRC_SCRATCHPAD_SEM_V
-ENTRY(lock_scratchpad_sem_sz)
- .word . - lock_scratchpad_sem
- .text
-/* Function to release the scratchpad semaphore */
-ENTRY(unlock_scratchpad_sem)
- stmfd sp!, {lr} @ save registers on stack
- ldr r3, sdrc_scratchpad_sem
- mov r2,#0
- str r2,[r3]
- ldmfd sp!, {pc} @ restore regs and return
-ENTRY(unlock_scratchpad_sem_sz)
- .word . - unlock_scratchpad_sem
+/*
+ * API functions
+ */
+
+/*
+ * The "get_*restore_pointer" functions are used to provide a
+ * physical restore address where the ROM code jumps while waking
+ * up from MPU OFF/OSWR state.
+ * The restore pointer is stored into the scratchpad.
+ */
.text
/* Function call to get the restore pointer for resume from OFF */
ENTRY(get_restore_pointer)
- stmfd sp!, {lr} @ save registers on stack
+ stmfd sp!, {lr} @ save registers on stack
adr r0, restore
- ldmfd sp!, {pc} @ restore regs and return
+ ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
- .word . - get_restore_pointer
+ .word . - get_restore_pointer
.text
-/* Function call to get the restore pointer for for ES3 to resume from OFF */
+/* Function call to get the restore pointer for 3630 resume from OFF */
+ENTRY(get_omap3630_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore_3630
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_omap3630_restore_pointer_sz)
+ .word . - get_omap3630_restore_pointer
+
+ .text
+/* Function call to get the restore pointer for ES3 to resume from OFF */
ENTRY(get_es3_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
adr r0, restore_es3
@@ -108,54 +103,23 @@
ENTRY(get_es3_restore_pointer_sz)
.word . - get_es3_restore_pointer
-ENTRY(es3_sdrc_fix)
- ldr r4, sdrc_syscfg @ get config addr
- ldr r5, [r4] @ get value
- tst r5, #0x100 @ is part access blocked
- it eq
- biceq r5, r5, #0x100 @ clear bit if set
- str r5, [r4] @ write back change
- ldr r4, sdrc_mr_0 @ get config addr
- ldr r5, [r4] @ get value
- str r5, [r4] @ write back change
- ldr r4, sdrc_emr2_0 @ get config addr
- ldr r5, [r4] @ get value
- str r5, [r4] @ write back change
- ldr r4, sdrc_manual_0 @ get config addr
- mov r5, #0x2 @ autorefresh command
- str r5, [r4] @ kick off refreshes
- ldr r4, sdrc_mr_1 @ get config addr
- ldr r5, [r4] @ get value
- str r5, [r4] @ write back change
- ldr r4, sdrc_emr2_1 @ get config addr
- ldr r5, [r4] @ get value
- str r5, [r4] @ write back change
- ldr r4, sdrc_manual_1 @ get config addr
- mov r5, #0x2 @ autorefresh command
- str r5, [r4] @ kick off refreshes
- bx lr
-sdrc_syscfg:
- .word SDRC_SYSCONFIG_P
-sdrc_mr_0:
- .word SDRC_MR_0_P
-sdrc_emr2_0:
- .word SDRC_EMR2_0_P
-sdrc_manual_0:
- .word SDRC_MANUAL_0_P
-sdrc_mr_1:
- .word SDRC_MR_1_P
-sdrc_emr2_1:
- .word SDRC_EMR2_1_P
-sdrc_manual_1:
- .word SDRC_MANUAL_1_P
-ENTRY(es3_sdrc_fix_sz)
- .word . - es3_sdrc_fix
+ .text
+/*
+ * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
+ * This function sets up a flag that will allow for this toggling to take
+ * place on 3630. Hopefully some version in the future may not need this.
+ */
+ENTRY(enable_omap3630_toggle_l2_on_restore)
+ stmfd sp!, {lr} @ save registers on stack
+ /* Setup so that we will disable and enable l2 */
+ mov r1, #0x1
+ str r1, l2dis_3630
+ ldmfd sp!, {pc} @ restore regs and return
+ .text
/* Function to call rom code to save secure ram context */
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
-save_secure_ram_debug:
- /* b save_secure_ram_debug */ @ enable to debug save code
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
@@ -185,278 +149,55 @@
.word . - save_secure_ram_context
/*
+ * ======================
+ * == Idle entry point ==
+ * ======================
+ */
+
+/*
* Forces OMAP into idle state
*
- * omap34xx_suspend() - This bit of code just executes the WFI
- * for normal idles.
+ * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
+ * and executes the WFI instruction. Calling WFI effectively changes the
+ * power domains states to the desired target power states.
*
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- * wakes up it continues execution at the point it went to sleep.
+ *
+ * Notes:
+ * - this code gets copied to internal SRAM at boot and after wake-up
+ * from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
+ * - when the OMAP wakes up it continues at different execution points
+ * depending on the low power mode (non-OFF vs OFF modes),
+ * cf. 'Resume path for xxx mode' comments.
*/
ENTRY(omap34xx_cpu_suspend)
- stmfd sp!, {r0-r12, lr} @ save registers on stack
-loop:
- /*b loop*/ @Enable to debug by stepping through code
- /* r0 contains restore pointer in sdram */
- /* r1 contains information about saving context */
- ldr r4, sdrc_power @ read the SDRC_POWER register
- ldr r5, [r4] @ read the contents of SDRC_POWER
- orr r5, r5, #0x40 @ enable self refresh on idle req
- str r5, [r4] @ write back to SDRC_POWER register
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
+ /*
+ * r0 contains restore pointer in sdram
+ * r1 contains information about saving context:
+ * 0 - No context lost
+ * 1 - Only L1 and logic lost
+ * 2 - Only L2 lost
+ * 3 - Both L1 and L2 lost
+ */
+
+ /* Directly jump to WFI is the context save is not required */
cmp r1, #0x0
- /* If context save is required, do that and execute wfi */
- bne save_context_wfi
- /* Data memory barrier and Data sync barrier */
- mov r1, #0
- mcr p15, 0, r1, c7, c10, 4
- mcr p15, 0, r1, c7, c10, 5
+ beq omap3_do_wfi
- wfi @ wait for interrupt
-
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- bl wait_sdrc_ok
-
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
-restore_es3:
- /*b restore_es3*/ @ Enable to debug restore code
- ldr r5, pm_prepwstst_core_p
- ldr r4, [r5]
- and r4, r4, #0x3
- cmp r4, #0x0 @ Check if previous power state of CORE is OFF
- bne restore
- adr r0, es3_sdrc_fix
- ldr r1, sram_base
- ldr r2, es3_sdrc_fix_sz
- mov r2, r2, ror #2
-copy_to_sram:
- ldmia r0!, {r3} @ val = *src
- stmia r1!, {r3} @ *dst = val
- subs r2, r2, #0x1 @ num_words--
- bne copy_to_sram
- ldr r1, sram_base
- blx r1
-restore:
- /* b restore*/ @ Enable to debug restore code
- /* Check what was the reason for mpu reset and store the reason in r9*/
- /* 1 - Only L1 and logic lost */
- /* 2 - Only L2 lost - In this case, we wont be here */
- /* 3 - Both L1 and L2 lost */
- ldr r1, pm_pwstctrl_mpu
- ldr r2, [r1]
- and r2, r2, #0x3
- cmp r2, #0x0 @ Check if target power state was OFF or RET
- moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
- movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
- bne logic_l1_restore
- ldr r0, control_stat
- ldr r1, [r0]
- and r1, #0x700
- cmp r1, #0x300
- beq l2_inv_gp
- mov r0, #40 @ set service ID for PPA
- mov r12, r0 @ copy secure Service ID in r12
- mov r1, #0 @ set task id for ROM code in r1
- mov r2, #4 @ set some flags in r2, r6
- mov r6, #0xff
- adr r3, l2_inv_api_params @ r3 points to dummy parameters
- mcr p15, 0, r0, c7, c10, 4 @ data write barrier
- mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
- .word 0xE1600071 @ call SMI monitor (smi #1)
- /* Write to Aux control register to set some bits */
- mov r0, #42 @ set service ID for PPA
- mov r12, r0 @ copy secure Service ID in r12
- mov r1, #0 @ set task id for ROM code in r1
- mov r2, #4 @ set some flags in r2, r6
- mov r6, #0xff
- ldr r4, scratchpad_base
- ldr r3, [r4, #0xBC] @ r3 points to parameters
- mcr p15, 0, r0, c7, c10, 4 @ data write barrier
- mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
- .word 0xE1600071 @ call SMI monitor (smi #1)
-
-#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
- /* Restore L2 aux control register */
- @ set service ID for PPA
- mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
- mov r12, r0 @ copy service ID in r12
- mov r1, #0 @ set task ID for ROM code in r1
- mov r2, #4 @ set some flags in r2, r6
- mov r6, #0xff
- ldr r4, scratchpad_base
- ldr r3, [r4, #0xBC]
- adds r3, r3, #8 @ r3 points to parameters
- mcr p15, 0, r0, c7, c10, 4 @ data write barrier
- mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
- .word 0xE1600071 @ call SMI monitor (smi #1)
-#endif
- b logic_l1_restore
-l2_inv_api_params:
- .word 0x1, 0x00
-l2_inv_gp:
- /* Execute smi to invalidate L2 cache */
- mov r12, #0x1 @ set up to invalide L2
-smi: .word 0xE1600070 @ Call SMI monitor (smieq)
- /* Write to Aux control register to set some bits */
- ldr r4, scratchpad_base
- ldr r3, [r4,#0xBC]
- ldr r0, [r3,#4]
- mov r12, #0x3
- .word 0xE1600070 @ Call SMI monitor (smieq)
- ldr r4, scratchpad_base
- ldr r3, [r4,#0xBC]
- ldr r0, [r3,#12]
- mov r12, #0x2
- .word 0xE1600070 @ Call SMI monitor (smieq)
-logic_l1_restore:
- mov r1, #0
- /* Invalidate all instruction caches to PoU
- * and flush branch target cache */
- mcr p15, 0, r1, c7, c5, 0
-
- ldr r4, scratchpad_base
- ldr r3, [r4,#0xBC]
- adds r3, r3, #16
- ldmia r3!, {r4-r6}
- mov sp, r4
- msr spsr_cxsf, r5
- mov lr, r6
-
- ldmia r3!, {r4-r9}
- /* Coprocessor access Control Register */
- mcr p15, 0, r4, c1, c0, 2
-
- /* TTBR0 */
- MCR p15, 0, r5, c2, c0, 0
- /* TTBR1 */
- MCR p15, 0, r6, c2, c0, 1
- /* Translation table base control register */
- MCR p15, 0, r7, c2, c0, 2
- /*domain access Control Register */
- MCR p15, 0, r8, c3, c0, 0
- /* data fault status Register */
- MCR p15, 0, r9, c5, c0, 0
-
- ldmia r3!,{r4-r8}
- /* instruction fault status Register */
- MCR p15, 0, r4, c5, c0, 1
- /*Data Auxiliary Fault Status Register */
- MCR p15, 0, r5, c5, c1, 0
- /*Instruction Auxiliary Fault Status Register*/
- MCR p15, 0, r6, c5, c1, 1
- /*Data Fault Address Register */
- MCR p15, 0, r7, c6, c0, 0
- /*Instruction Fault Address Register*/
- MCR p15, 0, r8, c6, c0, 2
- ldmia r3!,{r4-r7}
-
- /* user r/w thread and process ID */
- MCR p15, 0, r4, c13, c0, 2
- /* user ro thread and process ID */
- MCR p15, 0, r5, c13, c0, 3
- /*Privileged only thread and process ID */
- MCR p15, 0, r6, c13, c0, 4
- /* cache size selection */
- MCR p15, 2, r7, c0, c0, 0
- ldmia r3!,{r4-r8}
- /* Data TLB lockdown registers */
- MCR p15, 0, r4, c10, c0, 0
- /* Instruction TLB lockdown registers */
- MCR p15, 0, r5, c10, c0, 1
- /* Secure or Nonsecure Vector Base Address */
- MCR p15, 0, r6, c12, c0, 0
- /* FCSE PID */
- MCR p15, 0, r7, c13, c0, 0
- /* Context PID */
- MCR p15, 0, r8, c13, c0, 1
-
- ldmia r3!,{r4-r5}
- /* primary memory remap register */
- MCR p15, 0, r4, c10, c2, 0
- /*normal memory remap register */
- MCR p15, 0, r5, c10, c2, 1
-
- /* Restore cpsr */
- ldmia r3!,{r4} /*load CPSR from SDRAM*/
- msr cpsr, r4 /*store cpsr */
-
- /* Enabling MMU here */
- mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
- /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
- and r7, #0x7
- cmp r7, #0x0
- beq usettbr0
-ttbr_error:
- /* More work needs to be done to support N[0:2] value other than 0
- * So looping here so that the error can be detected
- */
- b ttbr_error
-usettbr0:
- mrc p15, 0, r2, c2, c0, 0
- ldr r5, ttbrbit_mask
- and r2, r5
- mov r4, pc
- ldr r5, table_index_mask
- and r4, r5 /* r4 = 31 to 20 bits of pc */
- /* Extract the value to be written to table entry */
- ldr r1, table_entry
- add r1, r1, r4 /* r1 has value to be written to table entry*/
- /* Getting the address of table entry to modify */
- lsr r4, #18
- add r2, r4 /* r2 has the location which needs to be modified */
- /* Storing previous entry of location being modified */
- ldr r5, scratchpad_base
- ldr r4, [r2]
- str r4, [r5, #0xC0]
- /* Modify the table entry */
- str r1, [r2]
- /* Storing address of entry being modified
- * - will be restored after enabling MMU */
- ldr r5, scratchpad_base
- str r2, [r5, #0xC4]
-
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
- mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
- mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
- mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
- /* Restore control register but dont enable caches here*/
- /* Caches will be enabled after restoring MMU table entry */
- ldmia r3!, {r4}
- /* Store previous value of control register in scratchpad */
- str r4, [r5, #0xC8]
- ldr r2, cache_pred_disable_mask
- and r4, r2
- mcr p15, 0, r4, c1, c0, 0
-
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
+ /* Otherwise fall through to the save context code */
save_context_wfi:
- /*b save_context_wfi*/ @ enable to debug save code
- mov r8, r0 /* Store SDRAM address in r8 */
+ mov r8, r0 @ Store SDRAM address in r8
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
stmia r8!, {r4-r5} @ Push parameters for restore call
mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
stmia r8!, {r4-r5} @ Push parameters for restore call
- /* Check what that target sleep state is:stored in r1*/
- /* 1 - Only L1 and logic lost */
- /* 2 - Only L2 lost */
- /* 3 - Both L1 and L2 lost */
- cmp r1, #0x2 /* Only L2 lost */
- beq clean_l2
- cmp r1, #0x1 /* L2 retained */
- /* r9 stores whether to clean L2 or not*/
- moveq r9, #0x0 /* Dont Clean L2 */
- movne r9, #0x1 /* Clean L2 */
+
+ /* Check what that target sleep state is from r1 */
+ cmp r1, #0x2 @ Only L2 lost, no need to save context
+ beq clean_caches
+
l1_logic_lost:
/* Store sp and spsr to SDRAM */
mov r4, sp
@@ -472,21 +213,27 @@
mrc p15, 0, r5, c2, c0, 1
mrc p15, 0, r6, c2, c0, 2
stmia r8!, {r4-r6}
- /* Domain access control register, data fault status register,
- and instruction fault status register */
+ /*
+ * Domain access control register, data fault status register,
+ * and instruction fault status register
+ */
mrc p15, 0, r4, c3, c0, 0
mrc p15, 0, r5, c5, c0, 0
mrc p15, 0, r6, c5, c0, 1
stmia r8!, {r4-r6}
- /* Data aux fault status register, instruction aux fault status,
- datat fault address register and instruction fault address register*/
+ /*
+ * Data aux fault status register, instruction aux fault status,
+ * data fault address register and instruction fault address register
+ */
mrc p15, 0, r4, c5, c1, 0
mrc p15, 0, r5, c5, c1, 1
mrc p15, 0, r6, c6, c0, 0
mrc p15, 0, r7, c6, c0, 2
stmia r8!, {r4-r7}
- /* user r/w thread and process ID, user r/o thread and process ID,
- priv only thread and process ID, cache size selection */
+ /*
+ * user r/w thread and process ID, user r/o thread and process ID,
+ * priv only thread and process ID, cache size selection
+ */
mrc p15, 0, r4, c13, c0, 2
mrc p15, 0, r5, c13, c0, 3
mrc p15, 0, r6, c13, c0, 4
@@ -513,86 +260,51 @@
mrc p15, 0, r4, c1, c0, 0
/* save control register */
stmia r8!, {r4}
-clean_caches:
- /* Clean Data or unified cache to POU*/
- /* How to invalidate only L1 cache???? - #FIX_ME# */
- /* mcr p15, 0, r11, c7, c11, 1 */
- cmp r9, #1 /* Check whether L2 inval is required or not*/
- bne skip_l2_inval
-clean_l2:
- /* read clidr */
- mrc p15, 1, r0, c0, c0, 1
- /* extract loc from clidr */
- ands r3, r0, #0x7000000
- /* left align loc bit field */
- mov r3, r3, lsr #23
- /* if loc is 0, then no need to clean */
- beq finished
- /* start clean at cache level 0 */
- mov r10, #0
-loop1:
- /* work out 3x current cache level */
- add r2, r10, r10, lsr #1
- /* extract cache type bits from clidr*/
- mov r1, r0, lsr r2
- /* mask of the bits for current cache only */
- and r1, r1, #7
- /* see what cache we have at this level */
- cmp r1, #2
- /* skip if no cache, or just i-cache */
- blt skip
- /* select current cache level in cssr */
- mcr p15, 2, r10, c0, c0, 0
- /* isb to sych the new cssr&csidr */
- isb
- /* read the new csidr */
- mrc p15, 1, r1, c0, c0, 0
- /* extract the length of the cache lines */
- and r2, r1, #7
- /* add 4 (line length offset) */
- add r2, r2, #4
- ldr r4, assoc_mask
- /* find maximum number on the way size */
- ands r4, r4, r1, lsr #3
- /* find bit position of way size increment */
- clz r5, r4
- ldr r7, numset_mask
- /* extract max number of the index size*/
- ands r7, r7, r1, lsr #13
-loop2:
- mov r9, r4
- /* create working copy of max way size*/
-loop3:
- /* factor way and cache number into r11 */
- orr r11, r10, r9, lsl r5
- /* factor index number into r11 */
- orr r11, r11, r7, lsl r2
- /*clean & invalidate by set/way */
- mcr p15, 0, r11, c7, c10, 2
- /* decrement the way*/
- subs r9, r9, #1
- bge loop3
- /*decrement the index */
- subs r7, r7, #1
- bge loop2
-skip:
- add r10, r10, #2
- /* increment cache number */
- cmp r3, r10
- bgt loop1
-finished:
- /*swith back to cache level 0 */
- mov r10, #0
- /* select current cache level in cssr */
- mcr p15, 2, r10, c0, c0, 0
- isb
-skip_l2_inval:
- /* Data memory barrier and Data sync barrier */
- mov r1, #0
- mcr p15, 0, r1, c7, c10, 4
- mcr p15, 0, r1, c7, c10, 5
- wfi @ wait for interrupt
+clean_caches:
+ /*
+ * Clean Data or unified cache to POU
+ * How to invalidate only L1 cache???? - #FIX_ME#
+ * mcr p15, 0, r11, c7, c11, 1
+ */
+ cmp r1, #0x1 @ Check whether L2 inval is required
+ beq omap3_do_wfi
+
+clean_l2:
+ /*
+ * jump out to kernel flush routine
+ * - reuse that code is better
+ * - it executes in a cached space so is faster than refetch per-block
+ * - should be faster and will change with kernel
+ * - 'might' have to copy address, load and jump to it
+ */
+ ldr r1, kernel_flush
+ mov lr, pc
+ bx r1
+
+omap3_do_wfi:
+ ldr r4, sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+/*
+ * ===================================
+ * == WFI instruction => Enter idle ==
+ * ===================================
+ */
+ wfi @ wait for interrupt
+
+/*
+ * ===================================
+ * == Resume path for non-OFF modes ==
+ * ===================================
+ */
nop
nop
nop
@@ -604,46 +316,421 @@
nop
nop
bl wait_sdrc_ok
- /* restore regs and return */
- ldmfd sp!, {r0-r12, pc}
+
+/*
+ * ===================================
+ * == Exit point from non-OFF modes ==
+ * ===================================
+ */
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+
+
+/*
+ * ==============================
+ * == Resume path for OFF mode ==
+ * ==============================
+ */
+
+/*
+ * The restore_* functions are called by the ROM code
+ * when back from WFI in OFF mode.
+ * Cf. the get_*restore_pointer functions.
+ *
+ * restore_es3: applies to 34xx >= ES3.0
+ * restore_3630: applies to 36xx
+ * restore: common code for 3xxx
+ */
+restore_es3:
+ ldr r5, pm_prepwstst_core_p
+ ldr r4, [r5]
+ and r4, r4, #0x3
+ cmp r4, #0x0 @ Check if previous power state of CORE is OFF
+ bne restore
+ adr r0, es3_sdrc_fix
+ ldr r1, sram_base
+ ldr r2, es3_sdrc_fix_sz
+ mov r2, r2, ror #2
+copy_to_sram:
+ ldmia r0!, {r3} @ val = *src
+ stmia r1!, {r3} @ *dst = val
+ subs r2, r2, #0x1 @ num_words--
+ bne copy_to_sram
+ ldr r1, sram_base
+ blx r1
+ b restore
+
+restore_3630:
+ ldr r1, pm_prepwstst_core_p
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if previous power state of CORE is OFF
+ bne restore
+ /* Disable RTA before giving control */
+ ldr r1, control_mem_rta
+ mov r2, #OMAP36XX_RTA_DISABLE
+ str r2, [r1]
+
+ /* Fall through to common code for the remaining logic */
+
+restore:
+ /*
+ * Check what was the reason for mpu reset and store the reason in r9:
+ * 0 - No context lost
+ * 1 - Only L1 and logic lost
+ * 2 - Only L2 lost - In this case, we wont be here
+ * 3 - Both L1 and L2 lost
+ */
+ ldr r1, pm_pwstctrl_mpu
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if target power state was OFF or RET
+ moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
+ movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
+ bne logic_l1_restore
+
+ ldr r0, l2dis_3630
+ cmp r0, #0x1 @ should we disable L2 on 3630?
+ bne skipl2dis
+ mrc p15, 0, r0, c1, c0, 1
+ bic r0, r0, #2 @ disable L2 cache
+ mcr p15, 0, r0, c1, c0, 1
+skipl2dis:
+ ldr r0, control_stat
+ ldr r1, [r0]
+ and r1, #0x700
+ cmp r1, #0x300
+ beq l2_inv_gp
+ mov r0, #40 @ set service ID for PPA
+ mov r12, r0 @ copy secure Service ID in r12
+ mov r1, #0 @ set task id for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ adr r3, l2_inv_api_params @ r3 points to dummy parameters
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+ /* Write to Aux control register to set some bits */
+ mov r0, #42 @ set service ID for PPA
+ mov r12, r0 @ copy secure Service ID in r12
+ mov r1, #0 @ set task id for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ ldr r4, scratchpad_base
+ ldr r3, [r4, #0xBC] @ r3 points to parameters
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+
+#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ /* Restore L2 aux control register */
+ @ set service ID for PPA
+ mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ mov r12, r0 @ copy service ID in r12
+ mov r1, #0 @ set task ID for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ ldr r4, scratchpad_base
+ ldr r3, [r4, #0xBC]
+ adds r3, r3, #8 @ r3 points to parameters
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+#endif
+ b logic_l1_restore
+
+l2_inv_api_params:
+ .word 0x1, 0x00
+l2_inv_gp:
+ /* Execute smi to invalidate L2 cache */
+ mov r12, #0x1 @ set up to invalidate L2
+ .word 0xE1600070 @ Call SMI monitor (smieq)
+ /* Write to Aux control register to set some bits */
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldr r0, [r3,#4]
+ mov r12, #0x3
+ .word 0xE1600070 @ Call SMI monitor (smieq)
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldr r0, [r3,#12]
+ mov r12, #0x2
+ .word 0xE1600070 @ Call SMI monitor (smieq)
+logic_l1_restore:
+ ldr r1, l2dis_3630
+ cmp r1, #0x1 @ Test if L2 re-enable needed on 3630
+ bne skipl2reen
+ mrc p15, 0, r1, c1, c0, 1
+ orr r1, r1, #2 @ re-enable L2 cache
+ mcr p15, 0, r1, c1, c0, 1
+skipl2reen:
+ mov r1, #0
+ /*
+ * Invalidate all instruction caches to PoU
+ * and flush branch target cache
+ */
+ mcr p15, 0, r1, c7, c5, 0
+
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ adds r3, r3, #16
+ ldmia r3!, {r4-r6}
+ mov sp, r4
+ msr spsr_cxsf, r5
+ mov lr, r6
+
+ ldmia r3!, {r4-r9}
+ /* Coprocessor access Control Register */
+ mcr p15, 0, r4, c1, c0, 2
+
+ /* TTBR0 */
+ MCR p15, 0, r5, c2, c0, 0
+ /* TTBR1 */
+ MCR p15, 0, r6, c2, c0, 1
+ /* Translation table base control register */
+ MCR p15, 0, r7, c2, c0, 2
+ /* Domain access Control Register */
+ MCR p15, 0, r8, c3, c0, 0
+ /* Data fault status Register */
+ MCR p15, 0, r9, c5, c0, 0
+
+ ldmia r3!,{r4-r8}
+ /* Instruction fault status Register */
+ MCR p15, 0, r4, c5, c0, 1
+ /* Data Auxiliary Fault Status Register */
+ MCR p15, 0, r5, c5, c1, 0
+ /* Instruction Auxiliary Fault Status Register*/
+ MCR p15, 0, r6, c5, c1, 1
+ /* Data Fault Address Register */
+ MCR p15, 0, r7, c6, c0, 0
+ /* Instruction Fault Address Register*/
+ MCR p15, 0, r8, c6, c0, 2
+ ldmia r3!,{r4-r7}
+
+ /* User r/w thread and process ID */
+ MCR p15, 0, r4, c13, c0, 2
+ /* User ro thread and process ID */
+ MCR p15, 0, r5, c13, c0, 3
+ /* Privileged only thread and process ID */
+ MCR p15, 0, r6, c13, c0, 4
+ /* Cache size selection */
+ MCR p15, 2, r7, c0, c0, 0
+ ldmia r3!,{r4-r8}
+ /* Data TLB lockdown registers */
+ MCR p15, 0, r4, c10, c0, 0
+ /* Instruction TLB lockdown registers */
+ MCR p15, 0, r5, c10, c0, 1
+ /* Secure or Nonsecure Vector Base Address */
+ MCR p15, 0, r6, c12, c0, 0
+ /* FCSE PID */
+ MCR p15, 0, r7, c13, c0, 0
+ /* Context PID */
+ MCR p15, 0, r8, c13, c0, 1
+
+ ldmia r3!,{r4-r5}
+ /* Primary memory remap register */
+ MCR p15, 0, r4, c10, c2, 0
+ /* Normal memory remap register */
+ MCR p15, 0, r5, c10, c2, 1
+
+ /* Restore cpsr */
+ ldmia r3!,{r4} @ load CPSR from SDRAM
+ msr cpsr, r4 @ store cpsr
+
+ /* Enabling MMU here */
+ mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
+ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
+ and r7, #0x7
+ cmp r7, #0x0
+ beq usettbr0
+ttbr_error:
+ /*
+ * More work needs to be done to support N[0:2] value other than 0
+ * So looping here so that the error can be detected
+ */
+ b ttbr_error
+usettbr0:
+ mrc p15, 0, r2, c2, c0, 0
+ ldr r5, ttbrbit_mask
+ and r2, r5
+ mov r4, pc
+ ldr r5, table_index_mask
+ and r4, r5 @ r4 = 31 to 20 bits of pc
+ /* Extract the value to be written to table entry */
+ ldr r1, table_entry
+ /* r1 has the value to be written to table entry*/
+ add r1, r1, r4
+ /* Getting the address of table entry to modify */
+ lsr r4, #18
+ /* r2 has the location which needs to be modified */
+ add r2, r4
+ /* Storing previous entry of location being modified */
+ ldr r5, scratchpad_base
+ ldr r4, [r2]
+ str r4, [r5, #0xC0]
+ /* Modify the table entry */
+ str r1, [r2]
+ /*
+ * Storing address of entry being modified
+ * - will be restored after enabling MMU
+ */
+ ldr r5, scratchpad_base
+ str r2, [r5, #0xC4]
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
+ mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
+ mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
+ /*
+ * Restore control register. This enables the MMU.
+ * The caches and prediction are not enabled here, they
+ * will be enabled after restoring the MMU table entry.
+ */
+ ldmia r3!, {r4}
+ /* Store previous value of control register in scratchpad */
+ str r4, [r5, #0xC8]
+ ldr r2, cache_pred_disable_mask
+ and r4, r2
+ mcr p15, 0, r4, c1, c0, 0
+
+/*
+ * ==============================
+ * == Exit point from OFF mode ==
+ * ==============================
+ */
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+
+
+/*
+ * Internal functions
+ */
+
+/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
+ .text
+ENTRY(es3_sdrc_fix)
+ ldr r4, sdrc_syscfg @ get config addr
+ ldr r5, [r4] @ get value
+ tst r5, #0x100 @ is part access blocked
+ it eq
+ biceq r5, r5, #0x100 @ clear bit if set
+ str r5, [r4] @ write back change
+ ldr r4, sdrc_mr_0 @ get config addr
+ ldr r5, [r4] @ get value
+ str r5, [r4] @ write back change
+ ldr r4, sdrc_emr2_0 @ get config addr
+ ldr r5, [r4] @ get value
+ str r5, [r4] @ write back change
+ ldr r4, sdrc_manual_0 @ get config addr
+ mov r5, #0x2 @ autorefresh command
+ str r5, [r4] @ kick off refreshes
+ ldr r4, sdrc_mr_1 @ get config addr
+ ldr r5, [r4] @ get value
+ str r5, [r4] @ write back change
+ ldr r4, sdrc_emr2_1 @ get config addr
+ ldr r5, [r4] @ get value
+ str r5, [r4] @ write back change
+ ldr r4, sdrc_manual_1 @ get config addr
+ mov r5, #0x2 @ autorefresh command
+ str r5, [r4] @ kick off refreshes
+ bx lr
+
+sdrc_syscfg:
+ .word SDRC_SYSCONFIG_P
+sdrc_mr_0:
+ .word SDRC_MR_0_P
+sdrc_emr2_0:
+ .word SDRC_EMR2_0_P
+sdrc_manual_0:
+ .word SDRC_MANUAL_0_P
+sdrc_mr_1:
+ .word SDRC_MR_1_P
+sdrc_emr2_1:
+ .word SDRC_EMR2_1_P
+sdrc_manual_1:
+ .word SDRC_MANUAL_1_P
+ENTRY(es3_sdrc_fix_sz)
+ .word . - es3_sdrc_fix
+
+/*
+ * This function implements the erratum ID i581 WA:
+ * SDRC state restore before accessing the SDRAM
+ *
+ * Only used at return from non-OFF mode. For OFF
+ * mode the ROM code configures the SDRC and
+ * the DPLL before calling the restore code directly
+ * from DDR.
+ */
/* Make sure SDRC accesses are ok */
wait_sdrc_ok:
- ldr r4, cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2
- cmp r5, #0
- bne wait_sdrc_ok
- ldr r4, sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
+
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
+ ldr r4, cm_idlest_ckgen
+wait_dpll3_lock:
+ ldr r5, [r4]
+ tst r5, #1
+ beq wait_dpll3_lock
+
+ ldr r4, cm_idlest1_core
+wait_sdrc_ready:
+ ldr r5, [r4]
+ tst r5, #0x2
+ bne wait_sdrc_ready
+ /* allow DLL powerdown upon hw idle req */
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+
+is_dll_in_lock_mode:
+ /* Is dll in lock mode? */
+ ldr r4, sdrc_dlla_ctrl
+ ldr r5, [r4]
+ tst r5, #0x4
+ bxne lr @ Return if locked
+ /* wait till dll locks */
+wait_dll_lock_timed:
+ ldr r4, wait_dll_lock_counter
+ add r4, r4, #1
+ str r4, wait_dll_lock_counter
+ ldr r4, sdrc_dlla_status
+ /* Wait 20uS for lock */
+ mov r6, #8
wait_dll_lock:
- /* Is dll in lock mode? */
- ldr r4, sdrc_dlla_ctrl
- ldr r5, [r4]
- tst r5, #0x4
- bxne lr
- /* wait till dll locks */
- ldr r4, sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
- bne wait_dll_lock
- bx lr
+ subs r6, r6, #0x1
+ beq kick_dll
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ bx lr @ Return when locked
+
+ /* disable/reenable DLL if not locked */
+kick_dll:
+ ldr r4, sdrc_dlla_ctrl
+ ldr r5, [r4]
+ mov r6, r5
+ bic r6, #(1<<3) @ disable dll
+ str r6, [r4]
+ dsb
+ orr r6, r6, #(1<<3) @ enable dll
+ str r6, [r4]
+ dsb
+ ldr r4, kick_counter
+ add r4, r4, #1
+ str r4, kick_counter
+ b wait_dll_lock_timed
cm_idlest1_core:
.word CM_IDLEST1_CORE_V
+cm_idlest_ckgen:
+ .word CM_IDLEST_CKGEN_V
sdrc_dlla_status:
.word SDRC_DLLA_STATUS_V
sdrc_dlla_ctrl:
.word SDRC_DLLA_CTRL_V
-pm_prepwstst_core:
- .word PM_PREPWSTST_CORE_V
pm_prepwstst_core_p:
.word PM_PREPWSTST_CORE_P
-pm_prepwstst_mpu:
- .word PM_PREPWSTST_MPU_V
pm_pwstctrl_mpu:
.word PM_PWSTCTRL_MPU_P
scratchpad_base:
@@ -651,13 +738,7 @@
sram_base:
.word SRAM_BASE_P + 0x8000
sdrc_power:
- .word SDRC_POWER_V
-clk_stabilize_delay:
- .word 0x000001FF
-assoc_mask:
- .word 0x3ff
-numset_mask:
- .word 0x7fff
+ .word SDRC_POWER_V
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
@@ -668,5 +749,20 @@
.word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
+control_mem_rta:
+ .word CONTROL_MEM_RTA_CTRL
+kernel_flush:
+ .word v7_flush_dcache_all
+l2dis_3630:
+ .word 0
+ /*
+ * When exporting to userspace while the counters are in SRAM,
+ * these 2 words need to be at the end to facilitate retrival!
+ */
+kick_counter:
+ .word 0
+wait_dll_lock_counter:
+ .word 0
+
ENTRY(omap34xx_cpu_suspend_sz)
.word . - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index fa2e5bf..6983cb4 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -28,9 +28,16 @@
config S3C2412_PM
bool
+ select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2412 power management
+config S3C2412_PM_SLEEP
+ bool
+ help
+ Internal config node to apply sleep for S3C2412 power management.
+ Can be selected by another SoCs with similar sleep procedure.
+
# Note, the S3C2412 IOtiming support is in plat-s3c24xx
config S3C2412_CPUFREQ
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 530ec46..6c48a91 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -14,7 +14,8 @@
obj-$(CONFIG_CPU_S3C2412) += clock.o
obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
-obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
+obj-$(CONFIG_S3C2412_PM) += pm.o
+obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
# Machine support
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 27b3e7c..df8d149 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -27,6 +27,7 @@
config S3C2416_PM
bool
+ select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2416 power management
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 28677ca..461aa035 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -378,6 +378,12 @@
static struct max8998_platform_data aquila_max8998_pdata = {
.num_regulators = ARRAY_SIZE(aquila_regulators),
.regulators = aquila_regulators,
+ .buck1_set1 = S5PV210_GPH0(3),
+ .buck1_set2 = S5PV210_GPH0(4),
+ .buck2_set3 = S5PV210_GPH0(5),
+ .buck1_max_voltage1 = 1200000,
+ .buck1_max_voltage2 = 1200000,
+ .buck2_max_voltage = 1200000,
};
#endif
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index b1dcf96..e22d511 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -518,6 +518,12 @@
static struct max8998_platform_data goni_max8998_pdata = {
.num_regulators = ARRAY_SIZE(goni_regulators),
.regulators = goni_regulators,
+ .buck1_set1 = S5PV210_GPH0(3),
+ .buck1_set2 = S5PV210_GPH0(4),
+ .buck2_set3 = S5PV210_GPH0(5),
+ .buck1_max_voltage1 = 1200000,
+ .buck1_max_voltage2 = 1200000,
+ .buck2_max_voltage = 1200000,
};
#endif
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index a285d13..f428c4d 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -1,4 +1,5 @@
/*
+ * Copyright (C) 2010 Magnus Damm
* Copyright (C) 2008 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or modify
@@ -14,24 +15,45 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <mach/hardware.h>
#include <mach/irqs.h>
+#define INTCA_BASE 0xe6980000
+#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */
+#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */
+#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */
+#define INTLVLB_OFFS 0x00000034 /* previous priority level */
+
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =INTFLGA
+ ldr \base, =INTCA_BASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base]
+ /* The single INTFLGA read access below results in the following:
+ *
+ * 1. INTLVLB is updated with old priority value from INTLVLA
+ * 2. Highest priority interrupt is accepted
+ * 3. INTLVLA is updated to contain priority of accepted interrupt
+ * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
+ */
+ ldr \irqnr, [\base, #INTFLGA_OFFS]
+
+ /* Restore INTLVLA with the value saved in INTLVLB.
+ * This is required to support interrupt priorities properly.
+ */
+ ldrb \tmp, [\base, #INTLVLB_OFFS]
+ strb \tmp, [\base, #INTLVLA_OFFS]
+
+ /* Handle invalid vector number case */
cmp \irqnr, #0
beq 1000f
- /* intevt to irq number */
+
+ /* Convert vector to irq number, same as the evt2irq() macro */
lsr \irqnr, \irqnr, #0x5
subs \irqnr, \irqnr, #16
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
index 4aecf6e..2b8fd8b 100644
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -2,6 +2,6 @@
#define __ASM_MACH_VMALLOC_H
/* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000
+#define VMALLOC_END 0xe6000000UL
#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index a863f55..c4b2b47 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -15,6 +15,10 @@
*
* Support functions for the OMAP internal DMA channels.
*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into DMA platform driver.
+ * - G, Manjunath Kondaiah <manjugk@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -53,7 +57,11 @@
#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
+static struct omap_system_dma_plat_info *p;
+static struct omap_dma_dev_attr *d;
+
static int enable_1510_mode;
+static u32 errata;
static struct omap_dma_global_context_registers {
u32 dma_irqenable_l0;
@@ -61,27 +69,6 @@
u32 dma_gcr;
} omap_dma_global_context;
-struct omap_dma_lch {
- int next_lch;
- int dev_id;
- u16 saved_csr;
- u16 enabled_irqs;
- const char *dev_name;
- void (*callback)(int lch, u16 ch_status, void *data);
- void *data;
-
-#ifndef CONFIG_ARCH_OMAP1
- /* required for Dynamic chaining */
- int prev_linked_ch;
- int next_linked_ch;
- int state;
- int chain_id;
-
- int status;
-#endif
- long flags;
-};
-
struct dma_link_info {
int *linked_dmach_q;
int no_of_lchs_linked;
@@ -137,15 +124,6 @@
static spinlock_t dma_chan_lock;
static struct omap_dma_lch *dma_chan;
-static void __iomem *omap_dma_base;
-
-static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
- INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
- INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
- INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
- INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
- INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
-};
static inline void disable_lnk(int lch);
static void omap_disable_channel_irq(int lch);
@@ -154,27 +132,9 @@
#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
__func__);
-#define dma_read(reg) \
-({ \
- u32 __val; \
- if (cpu_class_is_omap1()) \
- __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg); \
- else \
- __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg); \
- __val; \
-})
-
-#define dma_write(val, reg) \
-({ \
- if (cpu_class_is_omap1()) \
- __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
- else \
- __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg); \
-})
-
#ifdef CONFIG_ARCH_OMAP15XX
/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-static int omap_dma_in_1510_mode(void)
+int omap_dma_in_1510_mode(void)
{
return enable_1510_mode;
}
@@ -206,16 +166,6 @@
#define set_gdma_dev(req, dev) do {} while (0)
#endif
-/* Omap1 only */
-static void clear_lch_regs(int lch)
-{
- int i;
- void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
-
- for (i = 0; i < 0x2c; i += 2)
- __raw_writew(0, lch_base + i);
-}
-
void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
@@ -248,12 +198,12 @@
if (cpu_class_is_omap2()) {
u32 ccr;
- ccr = dma_read(CCR(lch));
+ ccr = p->dma_read(CCR, lch);
if (priority)
ccr |= (1 << 6);
else
ccr &= ~(1 << 6);
- dma_write(ccr, CCR(lch));
+ p->dma_write(ccr, CCR, lch);
}
}
EXPORT_SYMBOL(omap_set_dma_priority);
@@ -264,31 +214,31 @@
{
u32 l;
- l = dma_read(CSDP(lch));
+ l = p->dma_read(CSDP, lch);
l &= ~0x03;
l |= data_type;
- dma_write(l, CSDP(lch));
+ p->dma_write(l, CSDP, lch);
if (cpu_class_is_omap1()) {
u16 ccr;
- ccr = dma_read(CCR(lch));
+ ccr = p->dma_read(CCR, lch);
ccr &= ~(1 << 5);
if (sync_mode == OMAP_DMA_SYNC_FRAME)
ccr |= 1 << 5;
- dma_write(ccr, CCR(lch));
+ p->dma_write(ccr, CCR, lch);
- ccr = dma_read(CCR2(lch));
+ ccr = p->dma_read(CCR2, lch);
ccr &= ~(1 << 2);
if (sync_mode == OMAP_DMA_SYNC_BLOCK)
ccr |= 1 << 2;
- dma_write(ccr, CCR2(lch));
+ p->dma_write(ccr, CCR2, lch);
}
if (cpu_class_is_omap2() && dma_trigger) {
u32 val;
- val = dma_read(CCR(lch));
+ val = p->dma_read(CCR, lch);
/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
val &= ~((1 << 23) | (3 << 19) | 0x1f);
@@ -313,11 +263,11 @@
} else {
val &= ~(1 << 24); /* dest synch */
}
- dma_write(val, CCR(lch));
+ p->dma_write(val, CCR, lch);
}
- dma_write(elem_count, CEN(lch));
- dma_write(frame_count, CFN(lch));
+ p->dma_write(elem_count, CEN, lch);
+ p->dma_write(frame_count, CFN, lch);
}
EXPORT_SYMBOL(omap_set_dma_transfer_params);
@@ -328,7 +278,7 @@
if (cpu_class_is_omap1()) {
u16 w;
- w = dma_read(CCR2(lch));
+ w = p->dma_read(CCR2, lch);
w &= ~0x03;
switch (mode) {
@@ -343,23 +293,22 @@
default:
BUG();
}
- dma_write(w, CCR2(lch));
+ p->dma_write(w, CCR2, lch);
- w = dma_read(LCH_CTRL(lch));
+ w = p->dma_read(LCH_CTRL, lch);
w &= ~0x0f;
/* Default is channel type 2D */
if (mode) {
- dma_write((u16)color, COLOR_L(lch));
- dma_write((u16)(color >> 16), COLOR_U(lch));
+ p->dma_write(color, COLOR, lch);
w |= 1; /* Channel type G */
}
- dma_write(w, LCH_CTRL(lch));
+ p->dma_write(w, LCH_CTRL, lch);
}
if (cpu_class_is_omap2()) {
u32 val;
- val = dma_read(CCR(lch));
+ val = p->dma_read(CCR, lch);
val &= ~((1 << 17) | (1 << 16));
switch (mode) {
@@ -374,10 +323,10 @@
default:
BUG();
}
- dma_write(val, CCR(lch));
+ p->dma_write(val, CCR, lch);
color &= 0xffffff;
- dma_write(color, COLOR(lch));
+ p->dma_write(color, COLOR, lch);
}
}
EXPORT_SYMBOL(omap_set_dma_color_mode);
@@ -387,10 +336,10 @@
if (cpu_class_is_omap2()) {
u32 csdp;
- csdp = dma_read(CSDP(lch));
+ csdp = p->dma_read(CSDP, lch);
csdp &= ~(0x3 << 16);
csdp |= (mode << 16);
- dma_write(csdp, CSDP(lch));
+ p->dma_write(csdp, CSDP, lch);
}
}
EXPORT_SYMBOL(omap_set_dma_write_mode);
@@ -400,10 +349,10 @@
if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
u32 l;
- l = dma_read(LCH_CTRL(lch));
+ l = p->dma_read(LCH_CTRL, lch);
l &= ~0x7;
l |= mode;
- dma_write(l, LCH_CTRL(lch));
+ p->dma_write(l, LCH_CTRL, lch);
}
}
EXPORT_SYMBOL(omap_set_dma_channel_mode);
@@ -418,27 +367,21 @@
if (cpu_class_is_omap1()) {
u16 w;
- w = dma_read(CSDP(lch));
+ w = p->dma_read(CSDP, lch);
w &= ~(0x1f << 2);
w |= src_port << 2;
- dma_write(w, CSDP(lch));
+ p->dma_write(w, CSDP, lch);
}
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
l &= ~(0x03 << 12);
l |= src_amode << 12;
- dma_write(l, CCR(lch));
+ p->dma_write(l, CCR, lch);
- if (cpu_class_is_omap1()) {
- dma_write(src_start >> 16, CSSA_U(lch));
- dma_write((u16)src_start, CSSA_L(lch));
- }
+ p->dma_write(src_start, CSSA, lch);
- if (cpu_class_is_omap2())
- dma_write(src_start, CSSA(lch));
-
- dma_write(src_ei, CSEI(lch));
- dma_write(src_fi, CSFI(lch));
+ p->dma_write(src_ei, CSEI, lch);
+ p->dma_write(src_fi, CSFI, lch);
}
EXPORT_SYMBOL(omap_set_dma_src_params);
@@ -466,8 +409,8 @@
if (cpu_class_is_omap2())
return;
- dma_write(eidx, CSEI(lch));
- dma_write(fidx, CSFI(lch));
+ p->dma_write(eidx, CSEI, lch);
+ p->dma_write(fidx, CSFI, lch);
}
EXPORT_SYMBOL(omap_set_dma_src_index);
@@ -475,11 +418,11 @@
{
u32 l;
- l = dma_read(CSDP(lch));
+ l = p->dma_read(CSDP, lch);
l &= ~(1 << 6);
if (enable)
l |= (1 << 6);
- dma_write(l, CSDP(lch));
+ p->dma_write(l, CSDP, lch);
}
EXPORT_SYMBOL(omap_set_dma_src_data_pack);
@@ -488,7 +431,7 @@
unsigned int burst = 0;
u32 l;
- l = dma_read(CSDP(lch));
+ l = p->dma_read(CSDP, lch);
l &= ~(0x03 << 7);
switch (burst_mode) {
@@ -524,7 +467,7 @@
}
l |= (burst << 7);
- dma_write(l, CSDP(lch));
+ p->dma_write(l, CSDP, lch);
}
EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
@@ -536,27 +479,21 @@
u32 l;
if (cpu_class_is_omap1()) {
- l = dma_read(CSDP(lch));
+ l = p->dma_read(CSDP, lch);
l &= ~(0x1f << 9);
l |= dest_port << 9;
- dma_write(l, CSDP(lch));
+ p->dma_write(l, CSDP, lch);
}
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
l &= ~(0x03 << 14);
l |= dest_amode << 14;
- dma_write(l, CCR(lch));
+ p->dma_write(l, CCR, lch);
- if (cpu_class_is_omap1()) {
- dma_write(dest_start >> 16, CDSA_U(lch));
- dma_write(dest_start, CDSA_L(lch));
- }
+ p->dma_write(dest_start, CDSA, lch);
- if (cpu_class_is_omap2())
- dma_write(dest_start, CDSA(lch));
-
- dma_write(dst_ei, CDEI(lch));
- dma_write(dst_fi, CDFI(lch));
+ p->dma_write(dst_ei, CDEI, lch);
+ p->dma_write(dst_fi, CDFI, lch);
}
EXPORT_SYMBOL(omap_set_dma_dest_params);
@@ -565,8 +502,8 @@
if (cpu_class_is_omap2())
return;
- dma_write(eidx, CDEI(lch));
- dma_write(fidx, CDFI(lch));
+ p->dma_write(eidx, CDEI, lch);
+ p->dma_write(fidx, CDFI, lch);
}
EXPORT_SYMBOL(omap_set_dma_dest_index);
@@ -574,11 +511,11 @@
{
u32 l;
- l = dma_read(CSDP(lch));
+ l = p->dma_read(CSDP, lch);
l &= ~(1 << 13);
if (enable)
l |= 1 << 13;
- dma_write(l, CSDP(lch));
+ p->dma_write(l, CSDP, lch);
}
EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
@@ -587,7 +524,7 @@
unsigned int burst = 0;
u32 l;
- l = dma_read(CSDP(lch));
+ l = p->dma_read(CSDP, lch);
l &= ~(0x03 << 14);
switch (burst_mode) {
@@ -620,7 +557,7 @@
return;
}
l |= (burst << 14);
- dma_write(l, CSDP(lch));
+ p->dma_write(l, CSDP, lch);
}
EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
@@ -630,18 +567,18 @@
/* Clear CSR */
if (cpu_class_is_omap1())
- status = dma_read(CSR(lch));
+ status = p->dma_read(CSR, lch);
else if (cpu_class_is_omap2())
- dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
/* Enable some nice interrupts. */
- dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
+ p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
}
static void omap_disable_channel_irq(int lch)
{
if (cpu_class_is_omap2())
- dma_write(0, CICR(lch));
+ p->dma_write(0, CICR, lch);
}
void omap_enable_dma_irq(int lch, u16 bits)
@@ -660,7 +597,7 @@
{
u32 l;
- l = dma_read(CLNK_CTRL(lch));
+ l = p->dma_read(CLNK_CTRL, lch);
if (cpu_class_is_omap1())
l &= ~(1 << 14);
@@ -675,18 +612,18 @@
l = dma_chan[lch].next_linked_ch | (1 << 15);
#endif
- dma_write(l, CLNK_CTRL(lch));
+ p->dma_write(l, CLNK_CTRL, lch);
}
static inline void disable_lnk(int lch)
{
u32 l;
- l = dma_read(CLNK_CTRL(lch));
+ l = p->dma_read(CLNK_CTRL, lch);
/* Disable interrupts */
if (cpu_class_is_omap1()) {
- dma_write(0, CICR(lch));
+ p->dma_write(0, CICR, lch);
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
@@ -697,7 +634,7 @@
l &= ~(1 << 15);
}
- dma_write(l, CLNK_CTRL(lch));
+ p->dma_write(l, CLNK_CTRL, lch);
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
@@ -710,9 +647,9 @@
return;
spin_lock_irqsave(&dma_chan_lock, flags);
- val = dma_read(IRQENABLE_L0);
+ val = p->dma_read(IRQENABLE_L0, lch);
val |= 1 << lch;
- dma_write(val, IRQENABLE_L0);
+ p->dma_write(val, IRQENABLE_L0, lch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
}
@@ -725,9 +662,9 @@
return;
spin_lock_irqsave(&dma_chan_lock, flags);
- val = dma_read(IRQENABLE_L0);
+ val = p->dma_read(IRQENABLE_L0, lch);
val &= ~(1 << lch);
- dma_write(val, IRQENABLE_L0);
+ p->dma_write(val, IRQENABLE_L0, lch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
}
@@ -754,8 +691,8 @@
chan = dma_chan + free_ch;
chan->dev_id = dev_id;
- if (cpu_class_is_omap1())
- clear_lch_regs(free_ch);
+ if (p->clear_lch_regs)
+ p->clear_lch_regs(free_ch);
if (cpu_class_is_omap2())
omap_clear_dma(free_ch);
@@ -792,17 +729,17 @@
* Disable the 1510 compatibility mode and set the sync device
* id.
*/
- dma_write(dev_id | (1 << 10), CCR(free_ch));
+ p->dma_write(dev_id | (1 << 10), CCR, free_ch);
} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
- dma_write(dev_id, CCR(free_ch));
+ p->dma_write(dev_id, CCR, free_ch);
}
if (cpu_class_is_omap2()) {
omap2_enable_irq_lch(free_ch);
omap_enable_channel_irq(free_ch);
/* Clear the CSR register and IRQ status register */
- dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
- dma_write(1 << free_ch, IRQSTATUS_L0);
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
+ p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
}
*dma_ch_out = free_ch;
@@ -823,23 +760,23 @@
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
- dma_write(0, CICR(lch));
+ p->dma_write(0, CICR, lch);
/* Make sure the DMA transfer is stopped. */
- dma_write(0, CCR(lch));
+ p->dma_write(0, CCR, lch);
}
if (cpu_class_is_omap2()) {
omap2_disable_irq_lch(lch);
/* Clear the CSR register and IRQ status register */
- dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
- dma_write(1 << lch, IRQSTATUS_L0);
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+ p->dma_write(1 << lch, IRQSTATUS_L0, lch);
/* Disable all DMA interrupts for the channel. */
- dma_write(0, CICR(lch));
+ p->dma_write(0, CICR, lch);
/* Make sure the DMA transfer is stopped. */
- dma_write(0, CCR(lch));
+ p->dma_write(0, CCR, lch);
omap_clear_dma(lch);
}
@@ -880,7 +817,7 @@
reg |= (0x3 & tparams) << 12;
reg |= (arb_rate & 0xff) << 16;
- dma_write(reg, GCR);
+ p->dma_write(reg, GCR, 0);
}
EXPORT_SYMBOL(omap_dma_set_global_params);
@@ -903,14 +840,14 @@
printk(KERN_ERR "Invalid channel id\n");
return -EINVAL;
}
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
l &= ~((1 << 6) | (1 << 26));
if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
- dma_write(l, CCR(lch));
+ p->dma_write(l, CCR, lch);
return 0;
}
@@ -925,25 +862,7 @@
unsigned long flags;
local_irq_save(flags);
-
- if (cpu_class_is_omap1()) {
- u32 l;
-
- l = dma_read(CCR(lch));
- l &= ~OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
-
- /* Clear pending interrupts */
- l = dma_read(CSR(lch));
- }
-
- if (cpu_class_is_omap2()) {
- int i;
- void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
- for (i = 0; i < 0x44; i += 4)
- __raw_writel(0, lch_base + i);
- }
-
+ p->clear_dma(lch);
local_irq_restore(flags);
}
EXPORT_SYMBOL(omap_clear_dma);
@@ -957,13 +876,13 @@
* before starting dma transfer.
*/
if (cpu_is_omap15xx())
- dma_write(0, CPC(lch));
+ p->dma_write(0, CPC, lch);
else
- dma_write(0, CDAC(lch));
+ p->dma_write(0, CDAC, lch);
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
- char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+ char dma_chan_link_map[dma_lch_count];
dma_chan_link_map[lch] = 1;
/* Set the link register of the first channel */
@@ -985,32 +904,18 @@
cur_lch = next_lch;
} while (next_lch != -1);
- } else if (cpu_is_omap242x() ||
- (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) {
-
- /* Errata: Need to write lch even if not using chaining */
- dma_write(lch, CLNK_CTRL(lch));
- }
+ } else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
+ p->dma_write(lch, CLNK_CTRL, lch);
omap_enable_channel_irq(lch);
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
- /*
- * Errata: Inter Frame DMA buffering issue (All OMAP2420 and
- * OMAP2430ES1.0): DMA will wrongly buffer elements if packing and
- * bursting is enabled. This might result in data gets stalled in
- * FIFO at the end of the block.
- * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
- * guarantee no data will stay in the DMA FIFO in case inter frame
- * buffering occurs.
- */
- if (cpu_is_omap2420() ||
- (cpu_is_omap2430() && (omap_type() == OMAP2430_REV_ES1_0)))
- l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
-
+ if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
+ l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
l |= OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
+
+ p->dma_write(l, CCR, lch);
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
@@ -1022,46 +927,46 @@
/* Disable all interrupts on the channel */
if (cpu_class_is_omap1())
- dma_write(0, CICR(lch));
+ p->dma_write(0, CICR, lch);
- l = dma_read(CCR(lch));
- /* OMAP3 Errata i541: sDMA FIFO draining does not finish */
- if (cpu_is_omap34xx() && (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
+ l = p->dma_read(CCR, lch);
+ if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
+ (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
int i = 0;
u32 sys_cf;
/* Configure No-Standby */
- l = dma_read(OCP_SYSCONFIG);
+ l = p->dma_read(OCP_SYSCONFIG, lch);
sys_cf = l;
l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
- dma_write(l , OCP_SYSCONFIG);
+ p->dma_write(l , OCP_SYSCONFIG, 0);
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
l &= ~OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
+ p->dma_write(l, CCR, lch);
/* Wait for sDMA FIFO drain */
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
OMAP_DMA_CCR_WR_ACTIVE))) {
udelay(5);
i++;
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
}
if (i >= 100)
printk(KERN_ERR "DMA drain did not complete on "
"lch %d\n", lch);
/* Restore OCP_SYSCONFIG */
- dma_write(sys_cf, OCP_SYSCONFIG);
+ p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
} else {
l &= ~OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
+ p->dma_write(l, CCR, lch);
}
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
- char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+ char dma_chan_link_map[dma_lch_count];
memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
do {
@@ -1122,19 +1027,15 @@
dma_addr_t offset = 0;
if (cpu_is_omap15xx())
- offset = dma_read(CPC(lch));
+ offset = p->dma_read(CPC, lch);
else
- offset = dma_read(CSAC(lch));
+ offset = p->dma_read(CSAC, lch);
- /*
- * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
- * read before the DMA controller finished disabling the channel.
- */
- if (!cpu_is_omap15xx() && offset == 0)
- offset = dma_read(CSAC(lch));
+ if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
+ offset = p->dma_read(CSAC, lch);
if (cpu_class_is_omap1())
- offset |= (dma_read(CSSA_U(lch)) << 16);
+ offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
return offset;
}
@@ -1153,19 +1054,19 @@
dma_addr_t offset = 0;
if (cpu_is_omap15xx())
- offset = dma_read(CPC(lch));
+ offset = p->dma_read(CPC, lch);
else
- offset = dma_read(CDAC(lch));
+ offset = p->dma_read(CDAC, lch);
/*
* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
if (!cpu_is_omap15xx() && offset == 0)
- offset = dma_read(CDAC(lch));
+ offset = p->dma_read(CDAC, lch);
if (cpu_class_is_omap1())
- offset |= (dma_read(CDSA_U(lch)) << 16);
+ offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
return offset;
}
@@ -1173,7 +1074,7 @@
int omap_get_dma_active_status(int lch)
{
- return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
+ return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
}
EXPORT_SYMBOL(omap_get_dma_active_status);
@@ -1186,7 +1087,7 @@
return 1;
for (lch = 0; lch < dma_chan_count; lch++)
- if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
+ if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
return 1;
return 0;
@@ -1201,8 +1102,8 @@
{
if (omap_dma_in_1510_mode()) {
if (lch_head == lch_queue) {
- dma_write(dma_read(CCR(lch_head)) | (3 << 8),
- CCR(lch_head));
+ p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
+ CCR, lch_head);
return;
}
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -1228,8 +1129,8 @@
{
if (omap_dma_in_1510_mode()) {
if (lch_head == lch_queue) {
- dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
- CCR(lch_head));
+ p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8),
+ CCR, lch_head);
return;
}
printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -1255,8 +1156,6 @@
}
EXPORT_SYMBOL(omap_dma_unlink_lch);
-/*----------------------------------------------------------------------------*/
-
#ifndef CONFIG_ARCH_OMAP1
/* Create chain of DMA channesls */
static void create_dma_lch_chain(int lch_head, int lch_queue)
@@ -1281,15 +1180,15 @@
lch_queue;
}
- l = dma_read(CLNK_CTRL(lch_head));
+ l = p->dma_read(CLNK_CTRL, lch_head);
l &= ~(0x1f);
l |= lch_queue;
- dma_write(l, CLNK_CTRL(lch_head));
+ p->dma_write(l, CLNK_CTRL, lch_head);
- l = dma_read(CLNK_CTRL(lch_queue));
+ l = p->dma_read(CLNK_CTRL, lch_queue);
l &= ~(0x1f);
l |= (dma_chan[lch_queue].next_linked_ch);
- dma_write(l, CLNK_CTRL(lch_queue));
+ p->dma_write(l, CLNK_CTRL, lch_queue);
}
/**
@@ -1565,13 +1464,13 @@
/* Set the params to the free channel */
if (src_start != 0)
- dma_write(src_start, CSSA(lch));
+ p->dma_write(src_start, CSSA, lch);
if (dest_start != 0)
- dma_write(dest_start, CDSA(lch));
+ p->dma_write(dest_start, CDSA, lch);
/* Write the buffer size */
- dma_write(elem_count, CEN(lch));
- dma_write(frame_count, CFN(lch));
+ p->dma_write(elem_count, CEN, lch);
+ p->dma_write(frame_count, CFN, lch);
/*
* If the chain is dynamically linked,
@@ -1604,8 +1503,8 @@
enable_lnk(dma_chan[lch].prev_linked_ch);
dma_chan[lch].state = DMA_CH_QUEUED;
start_dma = 0;
- if (0 == ((1 << 7) & dma_read(
- CCR(dma_chan[lch].prev_linked_ch)))) {
+ if (0 == ((1 << 7) & p->dma_read(
+ CCR, dma_chan[lch].prev_linked_ch))) {
disable_lnk(dma_chan[lch].
prev_linked_ch);
pr_debug("\n prev ch is stopped\n");
@@ -1621,7 +1520,7 @@
}
omap_enable_channel_irq(lch);
- l = dma_read(CCR(lch));
+ l = p->dma_read(CCR, lch);
if ((0 == (l & (1 << 24))))
l &= ~(1 << 25);
@@ -1632,12 +1531,12 @@
l |= (1 << 7);
dma_chan[lch].state = DMA_CH_STARTED;
pr_debug("starting %d\n", lch);
- dma_write(l, CCR(lch));
+ p->dma_write(l, CCR, lch);
} else
start_dma = 0;
} else {
if (0 == (l & (1 << 7)))
- dma_write(l, CCR(lch));
+ p->dma_write(l, CCR, lch);
}
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
}
@@ -1682,7 +1581,7 @@
omap_enable_channel_irq(channels[0]);
}
- l = dma_read(CCR(channels[0]));
+ l = p->dma_read(CCR, channels[0]);
l |= (1 << 7);
dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
dma_chan[channels[0]].state = DMA_CH_STARTED;
@@ -1691,7 +1590,7 @@
l &= ~(1 << 25);
else
l |= (1 << 25);
- dma_write(l, CCR(channels[0]));
+ p->dma_write(l, CCR, channels[0]);
dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
@@ -1711,7 +1610,7 @@
{
int *channels;
u32 l, i;
- u32 sys_cf;
+ u32 sys_cf = 0;
/* Check for input params */
if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
@@ -1726,22 +1625,20 @@
}
channels = dma_linked_lch[chain_id].linked_dmach_q;
- /*
- * DMA Errata:
- * Special programming model needed to disable DMA before end of block
- */
- sys_cf = dma_read(OCP_SYSCONFIG);
- l = sys_cf;
- /* Middle mode reg set no Standby */
- l &= ~((1 << 12)|(1 << 13));
- dma_write(l, OCP_SYSCONFIG);
+ if (IS_DMA_ERRATA(DMA_ERRATA_i88)) {
+ sys_cf = p->dma_read(OCP_SYSCONFIG, 0);
+ l = sys_cf;
+ /* Middle mode reg set no Standby */
+ l &= ~((1 << 12)|(1 << 13));
+ p->dma_write(l, OCP_SYSCONFIG, 0);
+ }
for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
/* Stop the Channel transmission */
- l = dma_read(CCR(channels[i]));
+ l = p->dma_read(CCR, channels[i]);
l &= ~(1 << 7);
- dma_write(l, CCR(channels[i]));
+ p->dma_write(l, CCR, channels[i]);
/* Disable the link in all the channels */
disable_lnk(channels[i]);
@@ -1753,8 +1650,8 @@
/* Reset the Queue pointers */
OMAP_DMA_CHAIN_QINIT(chain_id);
- /* Errata - put in the old value */
- dma_write(sys_cf, OCP_SYSCONFIG);
+ if (IS_DMA_ERRATA(DMA_ERRATA_i88))
+ p->dma_write(sys_cf, OCP_SYSCONFIG, 0);
return 0;
}
@@ -1796,8 +1693,8 @@
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
- *ei = dma_read(CCEN(lch));
- *fi = dma_read(CCFN(lch));
+ *ei = p->dma_read(CCEN, lch);
+ *fi = p->dma_read(CCFN, lch);
return 0;
}
@@ -1834,7 +1731,7 @@
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
- return dma_read(CDAC(lch));
+ return p->dma_read(CDAC, lch);
}
EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
@@ -1868,7 +1765,7 @@
/* Get the current channel */
lch = channels[dma_linked_lch[chain_id].q_head];
- return dma_read(CSAC(lch));
+ return p->dma_read(CSAC, lch);
}
EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
#endif /* ifndef CONFIG_ARCH_OMAP1 */
@@ -1885,7 +1782,7 @@
csr = dma_chan[ch].saved_csr;
dma_chan[ch].saved_csr = 0;
} else
- csr = dma_read(CSR(ch));
+ csr = p->dma_read(CSR, ch);
if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
dma_chan[ch + 6].saved_csr = csr >> 7;
csr &= 0x7f;
@@ -1938,13 +1835,13 @@
static int omap2_dma_handle_ch(int ch)
{
- u32 status = dma_read(CSR(ch));
+ u32 status = p->dma_read(CSR, ch);
if (!status) {
if (printk_ratelimit())
printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
ch);
- dma_write(1 << ch, IRQSTATUS_L0);
+ p->dma_write(1 << ch, IRQSTATUS_L0, ch);
return 0;
}
if (unlikely(dma_chan[ch].dev_id == -1)) {
@@ -1960,17 +1857,12 @@
if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
printk(KERN_INFO "DMA transaction error with device %d\n",
dma_chan[ch].dev_id);
- if (cpu_class_is_omap2()) {
- /*
- * Errata: sDMA Channel is not disabled
- * after a transaction error. So we explicitely
- * disable the channel
- */
+ if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
u32 ccr;
- ccr = dma_read(CCR(ch));
+ ccr = p->dma_read(CCR, ch);
ccr &= ~OMAP_DMA_CCR_EN;
- dma_write(ccr, CCR(ch));
+ p->dma_write(ccr, CCR, ch);
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
}
}
@@ -1981,16 +1873,16 @@
printk(KERN_INFO "DMA misaligned error with device %d\n",
dma_chan[ch].dev_id);
- dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
- dma_write(1 << ch, IRQSTATUS_L0);
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
+ p->dma_write(1 << ch, IRQSTATUS_L0, ch);
/* read back the register to flush the write */
- dma_read(IRQSTATUS_L0);
+ p->dma_read(IRQSTATUS_L0, ch);
/* If the ch is not chained then chain_id will be -1 */
if (dma_chan[ch].chain_id != -1) {
int chain_id = dma_chan[ch].chain_id;
dma_chan[ch].state = DMA_CH_NOTSTARTED;
- if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
+ if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
dma_chan[dma_chan[ch].next_linked_ch].state =
DMA_CH_STARTED;
if (dma_linked_lch[chain_id].chain_mode ==
@@ -2000,10 +1892,10 @@
if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
OMAP_DMA_CHAIN_INCQHEAD(chain_id);
- status = dma_read(CSR(ch));
+ status = p->dma_read(CSR, ch);
}
- dma_write(status, CSR(ch));
+ p->dma_write(status, CSR, ch);
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
@@ -2017,13 +1909,13 @@
u32 val, enable_reg;
int i;
- val = dma_read(IRQSTATUS_L0);
+ val = p->dma_read(IRQSTATUS_L0, 0);
if (val == 0) {
if (printk_ratelimit())
printk(KERN_WARNING "Spurious DMA IRQ\n");
return IRQ_HANDLED;
}
- enable_reg = dma_read(IRQENABLE_L0);
+ enable_reg = p->dma_read(IRQENABLE_L0, 0);
val &= enable_reg; /* Dispatch only relevant interrupts */
for (i = 0; i < dma_lch_count && val != 0; i++) {
if (val & 1)
@@ -2049,119 +1941,66 @@
void omap_dma_global_context_save(void)
{
omap_dma_global_context.dma_irqenable_l0 =
- dma_read(IRQENABLE_L0);
+ p->dma_read(IRQENABLE_L0, 0);
omap_dma_global_context.dma_ocp_sysconfig =
- dma_read(OCP_SYSCONFIG);
- omap_dma_global_context.dma_gcr = dma_read(GCR);
+ p->dma_read(OCP_SYSCONFIG, 0);
+ omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
}
void omap_dma_global_context_restore(void)
{
int ch;
- dma_write(omap_dma_global_context.dma_gcr, GCR);
- dma_write(omap_dma_global_context.dma_ocp_sysconfig,
- OCP_SYSCONFIG);
- dma_write(omap_dma_global_context.dma_irqenable_l0,
- IRQENABLE_L0);
+ p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
+ p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+ OCP_SYSCONFIG, 0);
+ p->dma_write(omap_dma_global_context.dma_irqenable_l0,
+ IRQENABLE_L0, 0);
- /*
- * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
- * after secure sram context save and restore. Hence we need to
- * manually clear those IRQs to avoid spurious interrupts. This
- * affects only secure devices.
- */
- if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
- dma_write(0x3 , IRQSTATUS_L0);
+ if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
+ p->dma_write(0x3 , IRQSTATUS_L0, 0);
for (ch = 0; ch < dma_chan_count; ch++)
if (dma_chan[ch].dev_id != -1)
omap_clear_dma(ch);
}
-/*----------------------------------------------------------------------------*/
-
-static int __init omap_init_dma(void)
+static int __devinit omap_system_dma_probe(struct platform_device *pdev)
{
- unsigned long base;
- int ch, r;
+ int ch, ret = 0;
+ int dma_irq;
+ char irq_name[4];
+ int irq_rel;
- if (cpu_class_is_omap1()) {
- base = OMAP1_DMA_BASE;
- dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
- } else if (cpu_is_omap24xx()) {
- base = OMAP24XX_DMA4_BASE;
- dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
- } else if (cpu_is_omap34xx()) {
- base = OMAP34XX_DMA4_BASE;
- dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
- } else if (cpu_is_omap44xx()) {
- base = OMAP44XX_DMA4_BASE;
- dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
- } else {
- pr_err("DMA init failed for unsupported omap\n");
- return -ENODEV;
+ p = pdev->dev.platform_data;
+ if (!p) {
+ dev_err(&pdev->dev, "%s: System DMA initialized without"
+ "platform data\n", __func__);
+ return -EINVAL;
}
- omap_dma_base = ioremap(base, SZ_4K);
- BUG_ON(!omap_dma_base);
+ d = p->dma_attr;
+ errata = p->errata;
- if (cpu_class_is_omap2() && omap_dma_reserve_channels
+ if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
&& (omap_dma_reserve_channels <= dma_lch_count))
- dma_lch_count = omap_dma_reserve_channels;
+ d->lch_count = omap_dma_reserve_channels;
- dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
- GFP_KERNEL);
- if (!dma_chan) {
- r = -ENOMEM;
- goto out_unmap;
- }
+ dma_lch_count = d->lch_count;
+ dma_chan_count = dma_lch_count;
+ dma_chan = d->chan;
+ enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
if (cpu_class_is_omap2()) {
dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
dma_lch_count, GFP_KERNEL);
if (!dma_linked_lch) {
- r = -ENOMEM;
- goto out_free;
+ ret = -ENOMEM;
+ goto exit_dma_lch_fail;
}
}
- if (cpu_is_omap15xx()) {
- printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
- dma_chan_count = 9;
- enable_1510_mode = 1;
- } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
- printk(KERN_INFO "OMAP DMA hardware version %d\n",
- dma_read(HW_ID));
- printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
- (dma_read(CAPS_0_U) << 16) |
- dma_read(CAPS_0_L),
- (dma_read(CAPS_1_U) << 16) |
- dma_read(CAPS_1_L),
- dma_read(CAPS_2), dma_read(CAPS_3),
- dma_read(CAPS_4));
- if (!enable_1510_mode) {
- u16 w;
-
- /* Disable OMAP 3.0/3.1 compatibility mode. */
- w = dma_read(GSCR);
- w |= 1 << 3;
- dma_write(w, GSCR);
- dma_chan_count = 16;
- } else
- dma_chan_count = 9;
- } else if (cpu_class_is_omap2()) {
- u8 revision = dma_read(REVISION) & 0xff;
- printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
- revision >> 4, revision & 0xf);
- dma_chan_count = dma_lch_count;
- } else {
- dma_chan_count = 0;
- return 0;
- }
-
spin_lock_init(&dma_chan_lock);
-
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
if (cpu_class_is_omap2())
@@ -2178,20 +2017,23 @@
* request_irq() doesn't like dev_id (ie. ch) being
* zero, so we have to kludge around this.
*/
- r = request_irq(omap1_dma_irq[ch],
+ sprintf(&irq_name[0], "%d", ch);
+ dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+ if (dma_irq < 0) {
+ ret = dma_irq;
+ goto exit_dma_irq_fail;
+ }
+
+ /* INT_DMA_LCD is handled in lcd_dma.c */
+ if (dma_irq == INT_DMA_LCD)
+ continue;
+
+ ret = request_irq(dma_irq,
omap1_dma_irq_handler, 0, "DMA",
(void *) (ch + 1));
- if (r != 0) {
- int i;
-
- printk(KERN_ERR "unable to request IRQ %d "
- "for DMA (error %d)\n",
- omap1_dma_irq[ch], r);
- for (i = 0; i < ch; i++)
- free_irq(omap1_dma_irq[i],
- (void *) (i + 1));
- goto out_free;
- }
+ if (ret != 0)
+ goto exit_dma_irq_fail;
}
}
@@ -2200,46 +2042,91 @@
DMA_DEFAULT_FIFO_DEPTH, 0);
if (cpu_class_is_omap2()) {
- int irq;
- if (cpu_is_omap44xx())
- irq = OMAP44XX_IRQ_SDMA_0;
- else
- irq = INT_24XX_SDMA_IRQ0;
- setup_irq(irq, &omap24xx_dma_irq);
- }
-
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /* Enable smartidle idlemodes and autoidle */
- u32 v = dma_read(OCP_SYSCONFIG);
- v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
- DMA_SYSCONFIG_SIDLEMODE_MASK |
- DMA_SYSCONFIG_AUTOIDLE);
- v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
- DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
- DMA_SYSCONFIG_AUTOIDLE);
- dma_write(v , OCP_SYSCONFIG);
- /* reserve dma channels 0 and 1 in high security devices */
- if (cpu_is_omap34xx() &&
- (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
- printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
- "HS ROM code\n");
- dma_chan[0].dev_id = 0;
- dma_chan[1].dev_id = 1;
+ strcpy(irq_name, "0");
+ dma_irq = platform_get_irq_byname(pdev, irq_name);
+ if (dma_irq < 0) {
+ dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
+ goto exit_dma_lch_fail;
+ }
+ ret = setup_irq(dma_irq, &omap24xx_dma_irq);
+ if (ret) {
+ dev_err(&pdev->dev, "set_up failed for IRQ %d"
+ "for DMA (error %d)\n", dma_irq, ret);
+ goto exit_dma_lch_fail;
}
}
+ /* reserve dma channels 0 and 1 in high security devices */
+ if (cpu_is_omap34xx() &&
+ (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+ printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+ "HS ROM code\n");
+ dma_chan[0].dev_id = 0;
+ dma_chan[1].dev_id = 1;
+ }
+ p->show_dma_caps();
return 0;
-out_free:
+exit_dma_irq_fail:
+ dev_err(&pdev->dev, "unable to request IRQ %d"
+ "for DMA (error %d)\n", dma_irq, ret);
+ for (irq_rel = 0; irq_rel < ch; irq_rel++) {
+ dma_irq = platform_get_irq(pdev, irq_rel);
+ free_irq(dma_irq, (void *)(irq_rel + 1));
+ }
+
+exit_dma_lch_fail:
+ kfree(p);
+ kfree(d);
kfree(dma_chan);
-
-out_unmap:
- iounmap(omap_dma_base);
-
- return r;
+ return ret;
}
-arch_initcall(omap_init_dma);
+static int __devexit omap_system_dma_remove(struct platform_device *pdev)
+{
+ int dma_irq;
+
+ if (cpu_class_is_omap2()) {
+ char irq_name[4];
+ strcpy(irq_name, "0");
+ dma_irq = platform_get_irq_byname(pdev, irq_name);
+ remove_irq(dma_irq, &omap24xx_dma_irq);
+ } else {
+ int irq_rel = 0;
+ for ( ; irq_rel < dma_chan_count; irq_rel++) {
+ dma_irq = platform_get_irq(pdev, irq_rel);
+ free_irq(dma_irq, (void *)(irq_rel + 1));
+ }
+ }
+ kfree(p);
+ kfree(d);
+ kfree(dma_chan);
+ return 0;
+}
+
+static struct platform_driver omap_system_dma_driver = {
+ .probe = omap_system_dma_probe,
+ .remove = omap_system_dma_remove,
+ .driver = {
+ .name = "omap_dma_system"
+ },
+};
+
+static int __init omap_system_dma_init(void)
+{
+ return platform_driver_register(&omap_system_dma_driver);
+}
+arch_initcall(omap_system_dma_init);
+
+static void __exit omap_system_dma_exit(void)
+{
+ platform_driver_unregister(&omap_system_dma_driver);
+}
+
+MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
/*
* Reserve the omap SDMA channels using cmdline bootarg
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 0cce4ca..d1c916f 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -21,142 +21,16 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
+#include <linux/platform_device.h>
+
+/*
+ * TODO: These dma channel defines should go away once all
+ * the omap drivers hwmod adapted.
+ */
+
/* Move omap4 specific defines to dma-44xx.h */
#include "dma-44xx.h"
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE (0xfffed800)
-
-#define OMAP1_DMA_GCR 0x400
-#define OMAP1_DMA_GSCR 0x404
-#define OMAP1_DMA_GRST 0x408
-#define OMAP1_DMA_HW_ID 0x442
-#define OMAP1_DMA_PCH2_ID 0x444
-#define OMAP1_DMA_PCH0_ID 0x446
-#define OMAP1_DMA_PCH1_ID 0x448
-#define OMAP1_DMA_PCHG_ID 0x44a
-#define OMAP1_DMA_PCHD_ID 0x44c
-#define OMAP1_DMA_CAPS_0_U 0x44e
-#define OMAP1_DMA_CAPS_0_L 0x450
-#define OMAP1_DMA_CAPS_1_U 0x452
-#define OMAP1_DMA_CAPS_1_L 0x454
-#define OMAP1_DMA_CAPS_2 0x456
-#define OMAP1_DMA_CAPS_3 0x458
-#define OMAP1_DMA_CAPS_4 0x45a
-#define OMAP1_DMA_PCH2_SR 0x460
-#define OMAP1_DMA_PCH0_SR 0x480
-#define OMAP1_DMA_PCH1_SR 0x482
-#define OMAP1_DMA_PCHD_SR 0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
-#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION 0x00
-#define OMAP_DMA4_GCR 0x78
-#define OMAP_DMA4_IRQSTATUS_L0 0x08
-#define OMAP_DMA4_IRQSTATUS_L1 0x0c
-#define OMAP_DMA4_IRQSTATUS_L2 0x10
-#define OMAP_DMA4_IRQSTATUS_L3 0x14
-#define OMAP_DMA4_IRQENABLE_L0 0x18
-#define OMAP_DMA4_IRQENABLE_L1 0x1c
-#define OMAP_DMA4_IRQENABLE_L2 0x20
-#define OMAP_DMA4_IRQENABLE_L3 0x24
-#define OMAP_DMA4_SYSSTATUS 0x28
-#define OMAP_DMA4_OCP_SYSCONFIG 0x2c
-#define OMAP_DMA4_CAPS_0 0x64
-#define OMAP_DMA4_CAPS_2 0x6c
-#define OMAP_DMA4_CAPS_3 0x70
-#define OMAP_DMA4_CAPS_4 0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT 17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */
-#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */
-#define OMAP1_DMA_CCEN(n) 0
-#define OMAP1_DMA_CCFN(n) 0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
-
-/* Additional registers available on OMAP4 */
-#define OMAP_DMA4_CDP(n) (0x60 * (n) + 0xd0)
-#define OMAP_DMA4_CNDP(n) (0x60 * (n) + 0xd4)
-#define OMAP_DMA4_CCDN(n) (0x60 * (n) + 0xd8)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION 0
-#define OMAP1_DMA_IRQSTATUS_L0 0
-#define OMAP1_DMA_IRQENABLE_L0 0
-#define OMAP1_DMA_OCP_SYSCONFIG 0
-#define OMAP_DMA4_HW_ID 0
-#define OMAP_DMA4_CAPS_0_L 0
-#define OMAP_DMA4_CAPS_0_U 0
-#define OMAP_DMA4_CAPS_1_L 0
-#define OMAP_DMA4_CAPS_1_U 0
-#define OMAP_DMA4_GSCR 0
-#define OMAP_DMA4_CPC(n) 0
-
-#define OMAP_DMA4_LCH_CTRL(n) 0
-#define OMAP_DMA4_COLOR_L(n) 0
-#define OMAP_DMA4_COLOR_U(n) 0
-#define OMAP_DMA4_CCR2(n) 0
-#define OMAP1_DMA_CSSA(n) 0
-#define OMAP1_DMA_CDSA(n) 0
-#define OMAP_DMA4_CSSA_L(n) 0
-#define OMAP_DMA4_CSSA_U(n) 0
-#define OMAP_DMA4_CDSA_L(n) 0
-#define OMAP_DMA4_CDSA_U(n) 0
-#define OMAP1_DMA_COLOR(n) 0
-
-/*----------------------------------------------------------------------------*/
-
/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
#define OMAP_DMA_MCSI1_TX 1
@@ -405,6 +279,63 @@
#define DMA_CH_PRIO_HIGH 0x1
#define DMA_CH_PRIO_LOW 0x0 /* Def */
+/* Errata handling */
+#define IS_DMA_ERRATA(id) (errata & (id))
+#define SET_DMA_ERRATA(id) (errata |= (id))
+
+#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0)
+#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1)
+#define DMA_ERRATA_i378 BIT(0x2)
+#define DMA_ERRATA_i541 BIT(0x3)
+#define DMA_ERRATA_i88 BIT(0x4)
+#define DMA_ERRATA_3_3 BIT(0x5)
+#define DMA_ROMCODE_BUG BIT(0x6)
+
+/* Attributes for OMAP DMA Contrller */
+#define DMA_LINKED_LCH BIT(0x0)
+#define GLOBAL_PRIORITY BIT(0x1)
+#define RESERVE_CHANNEL BIT(0x2)
+#define IS_CSSA_32 BIT(0x3)
+#define IS_CDSA_32 BIT(0x4)
+#define IS_RW_PRIORITY BIT(0x5)
+#define ENABLE_1510_MODE BIT(0x6)
+#define SRC_PORT BIT(0x7)
+#define DST_PORT BIT(0x8)
+#define SRC_INDEX BIT(0x9)
+#define DST_INDEX BIT(0xA)
+#define IS_BURST_ONLY4 BIT(0xB)
+#define CLEAR_CSR_ON_READ BIT(0xC)
+#define IS_WORD_16 BIT(0xD)
+
+enum omap_reg_offsets {
+
+GCR, GSCR, GRST1, HW_ID,
+PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID,
+PCHD_ID, CAPS_0, CAPS_1, CAPS_2,
+CAPS_3, CAPS_4, PCH2_SR, PCH0_SR,
+PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0,
+IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0,
+IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS,
+OCP_SYSCONFIG,
+
+/* omap1+ specific */
+CPC, CCR2, LCH_CTRL,
+
+/* Common registers for all omap's */
+CSDP, CCR, CICR, CSR,
+CEN, CFN, CSFI, CSEI,
+CSAC, CDAC, CDEI,
+CDFI, CLNK_CTRL,
+
+/* Channel specific registers */
+CSSA, CDSA, COLOR,
+CCEN, CCFN,
+
+/* omap3630 and omap4 specific */
+CDP, CNDP, CCDN,
+
+};
+
enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_DIS = 0,
OMAP_DMA_DATA_BURST_4,
@@ -470,6 +401,41 @@
#endif
};
+struct omap_dma_lch {
+ int next_lch;
+ int dev_id;
+ u16 saved_csr;
+ u16 enabled_irqs;
+ const char *dev_name;
+ void (*callback)(int lch, u16 ch_status, void *data);
+ void *data;
+ long flags;
+ /* required for Dynamic chaining */
+ int prev_linked_ch;
+ int next_linked_ch;
+ int state;
+ int chain_id;
+ int status;
+};
+
+struct omap_dma_dev_attr {
+ u32 dev_caps;
+ u16 lch_count;
+ u16 chan_count;
+ struct omap_dma_lch *chan;
+};
+
+/* System DMA platform data structure */
+struct omap_system_dma_plat_info {
+ struct omap_dma_dev_attr *dma_attr;
+ u32 errata;
+ void (*disable_irq_lch)(int lch);
+ void (*show_dma_caps)(void);
+ void (*clear_lch_regs)(int lch);
+ void (*clear_dma)(int lch);
+ void (*dma_write)(u32 val, int reg, int lch);
+ u32 (*dma_read)(int reg, int lch);
+};
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 3ae52cc..793ce9d 100644
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
@@ -10,16 +10,18 @@
#ifndef ASMARM_ARCH_KEYPAD_H
#define ASMARM_ARCH_KEYPAD_H
-#warning: Please update the board to use matrix_keypad.h instead
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#endif
+#include <linux/input/matrix_keypad.h>
struct omap_kp_platform_data {
int rows;
int cols;
- int *keymap;
- unsigned int keymapsize;
- unsigned int rep:1;
+ const struct matrix_keymap_data *keymap_data;
+ bool rep;
unsigned long delay;
- unsigned int dbounce:1;
+ bool dbounce;
/* specific to OMAP242x*/
unsigned int *row_gpios;
unsigned int *col_gpios;
@@ -28,18 +30,21 @@
/* Group (0..3) -- when multiple keys are pressed, only the
* keys pressed in the same group are considered as pressed. This is
* in order to workaround certain crappy HW designs that produce ghost
- * keypresses. */
-#define GROUP_0 (0 << 16)
-#define GROUP_1 (1 << 16)
-#define GROUP_2 (2 << 16)
-#define GROUP_3 (3 << 16)
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT 14
+#define GROUP_0 (0 << GROUP_SHIFT)
+#define GROUP_1 (1 << GROUP_SHIFT)
+#define GROUP_2 (2 << GROUP_SHIFT)
+#define GROUP_3 (3 << GROUP_SHIFT)
#define GROUP_MASK GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
-#define KEY_PERSISTENT 0x00800000
-#define KEYNUM_MASK 0x00EFFFFF
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
- KEY_PERSISTENT)
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 728fbb9..62c3fe9 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -17,27 +17,10 @@
#include <linux/device.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
+#include <linux/opp.h>
#include "powerdomain.h"
-/**
- * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
- * @rate: target clock rate
- * @opp_id: OPP ID
- * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
- *
- * Operating performance point data. Can vary by OMAP chip and board.
- */
-struct omap_opp {
- unsigned long rate;
- u8 opp_id;
- u16 min_vdd;
-};
-
-extern struct omap_opp *mpu_opps;
-extern struct omap_opp *dsp_opps;
-extern struct omap_opp *l3_opps;
-
/*
* agent_id values for use with omap_pm_set_min_bus_tput():
*
@@ -59,9 +42,11 @@
* framework starts. The "_if_" is to avoid name collisions with the
* PM idle-loop code.
*/
-int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
- struct omap_opp *dsp_opp_table,
- struct omap_opp *l3_opp_table);
+#ifdef CONFIG_OMAP_PM_NONE
+#define omap_pm_if_early_init() 0
+#else
+int __init omap_pm_if_early_init(void);
+#endif
/**
* omap_pm_if_init - OMAP PM init code called after clock fw init
@@ -69,7 +54,11 @@
* The main initialization code. OPP tables are passed in here. The
* "_if_" is to avoid name collisions with the PM idle-loop code.
*/
+#ifdef CONFIG_OMAP_PM_NONE
+#define omap_pm_if_init() 0
+#else
int __init omap_pm_if_init(void);
+#endif
/**
* omap_pm_if_exit - OMAP PM exit code
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 5905100..9967d5e 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -11,6 +11,7 @@
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
+#ifndef __ASSEMBLY__
extern void * omap_sram_push(void * start, unsigned long size);
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
@@ -74,4 +75,14 @@
static inline void omap_push_sram_idle(void) {}
#endif /* CONFIG_PM */
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#define OMAP4_SRAM_PA 0x40300000
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 7bbc074..ad98b85 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -146,6 +146,7 @@
DEBUG_LL_OMAP3(3, cm_t35);
DEBUG_LL_OMAP3(3, cm_t3517);
DEBUG_LL_OMAP3(3, craneboard);
+ DEBUG_LL_OMAP3(3, devkit8000);
DEBUG_LL_OMAP3(3, igep0020);
DEBUG_LL_OMAP3(3, igep0030);
DEBUG_LL_OMAP3(3, nokia_rm680);
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index e129ce8..ca75abb 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -26,10 +26,6 @@
#include <plat/powerdomain.h>
-struct omap_opp *dsp_opps;
-struct omap_opp *mpu_opps;
-struct omap_opp *l3_opps;
-
/*
* Device-driver-originated constraints (via board-*.c files)
*/
@@ -308,13 +304,8 @@
/* Should be called before clk framework init */
-int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
- struct omap_opp *dsp_opp_table,
- struct omap_opp *l3_opp_table)
+int __init omap_pm_if_early_init(void)
{
- mpu_opps = mpu_opp_table;
- dsp_opps = dsp_opp_table;
- l3_opps = l3_opp_table;
return 0;
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 819ea0c..1a686c8 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -41,15 +41,12 @@
#define OMAP1_SRAM_PA 0x20000000
#define OMAP1_SRAM_VA VMALLOC_END
-#define OMAP2_SRAM_PA 0x40200000
-#define OMAP2_SRAM_PUB_PA 0x4020f800
+#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP2_SRAM_VA 0xfe400000
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xfe400000
-#define OMAP3_SRAM_PUB_PA 0x40208000
+#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA 0x40300000
#define OMAP4_SRAM_VA 0xfe400000
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5a27b1b..eb105e6 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -8,7 +8,7 @@
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
- select S3C_DEVICE_NAND
+ select S3C_DEV_NAND
select S3C_GPIO_CFG_S3C24XX
help
Base platform code for any Samsung S3C24XX device
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 67a2fa2..0a9b5b8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -19,6 +19,8 @@
select GENERIC_ATOMIC64 if !64BIT
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
+ select HAVE_GENERIC_HARDIRQS
+ select GENERIC_IRQ_PROBE
menu "Machine selection"
@@ -1664,6 +1666,28 @@
endchoice
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+ default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+ range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+ default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+ range 11 64
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ The page size is not necessarily 4KB. Keep this in mind
+ when choosing a value for this option.
+
config BOARD_SCACHE
bool
@@ -1922,20 +1946,6 @@
bool
#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-config IRQ_PER_CPU
- bool
-
-#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
# caches such as R3000, SB1, R7000 or those that look like they're virtually
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 3691630..9e7814d 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -27,6 +27,7 @@
static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
unsigned int old_state)
{
+#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
@@ -49,6 +50,7 @@
serial8250_do_pm(port, state, old_state);
break;
}
+#endif
}
#define PORT(_base, _irq) \
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index b30df5c..baeb213 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -54,10 +54,9 @@
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str)
+ if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
- else
- strict_strtoul(memsize_str, 0, &memsize);
+
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
index fc0e715..2ca4ada 100644
--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@@ -239,12 +239,12 @@
calculate(base_clock, frequency, &prediv, &postdiv, &mul);
writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
- msleep(1);
+ mdelay(1);
writel(4, &clock->pll);
while (readl(&clock->pll) & PLL_STATUS)
;
writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
- msleep(75);
+ mdelay(75);
}
static void __init tnetd7300_init_clocks(void)
@@ -456,7 +456,7 @@
}
EXPORT_SYMBOL(clk_put);
-int __init ar7_init_clocks(void)
+void __init ar7_init_clocks(void)
{
switch (ar7_chip_id()) {
case AR7_CHIP_7100:
@@ -472,7 +472,4 @@
}
/* adjust vbus clock rate */
vbus_clk.rate = bus_clk.rate / 2;
-
- return 0;
}
-arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
index 5fb8a01..22c9321 100644
--- a/arch/mips/ar7/time.c
+++ b/arch/mips/ar7/time.c
@@ -30,6 +30,9 @@
{
struct clk *cpu_clk;
+ /* Initialize ar7 clocks so the CPU clock frequency is correct */
+ ar7_init_clocks();
+
cpu_clk = clk_get(NULL, "cpu");
if (IS_ERR(cpu_clk)) {
printk(KERN_ERR "unable to get cpu clock\n");
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index b1aee33..c95f90b 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -32,7 +32,6 @@
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
#include <asm/mach-bcm47xx/nvram.h>
struct ssb_bus ssb_bcm47xx;
@@ -57,68 +56,112 @@
cpu_relax();
}
-static void str2eaddr(char *str, char *dest)
+#define READ_FROM_NVRAM(_outvar, name, buf) \
+ if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
+
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
{
- int i = 0;
+ char buf[100];
+ u32 boardflags;
- if (str == NULL) {
- memset(dest, 0, 6);
- return;
+ memset(sprom, 0, sizeof(struct ssb_sprom));
+
+ sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+ READ_FROM_NVRAM(revision, "sromrev", buf);
+ if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->il0mac);
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et0mac);
+ if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et1mac);
+ READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+ READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+ READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
+ READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
+ READ_FROM_NVRAM(board_rev, "boardrev", buf);
+ READ_FROM_NVRAM(country_code, "ccode", buf);
+ READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
+ READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
+ READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
+ READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
+ READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
+ READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
+ READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
+ READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
+ READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
+ READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
+ READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
+ READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
+ READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
+ READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
+ READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
+ READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
+ READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
+ READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
+ READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
+ READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
+ READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+ READ_FROM_NVRAM(tri2g, "tri2g", buf);
+ READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
+ READ_FROM_NVRAM(tri5g, "tri5g", buf);
+ READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+ READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
+ READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
+ READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
+ READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
+ READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
+ READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
+ READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
+ READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
+ READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
+ READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
+ READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
+ READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
+ READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
+ READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+ READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
}
-
- for (;;) {
- dest[i++] = (char) simple_strtoul(str, NULL, 16);
- str += 2;
- if (!*str++ || i == 6)
- break;
+ if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
}
}
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
- char buf[100];
+ char buf[20];
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
+ else
+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
- /* Fill sprom structure */
- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
- iv->sprom.revision = 3;
+ bcm47xx_fill_sprom(&iv->sprom);
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et0mac);
-
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et1mac);
-
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;
}
@@ -126,12 +169,28 @@
void __init plat_mem_setup(void)
{
int err;
+ char buf[100];
+ struct ssb_mipscore *mcore;
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
+ mcore = &ssb_bcm47xx.mipscore;
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+ struct ssb_serial_port port;
+
+ printk(KERN_DEBUG "Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+ sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
+
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 06d59dc..8687753 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -111,8 +111,8 @@
* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
*/
-#define PRID_IMP_BMIPS4KC 0x4000
-#define PRID_IMP_BMIPS32 0x8000
+#define PRID_IMP_BMIPS32_REV4 0x4000
+#define PRID_IMP_BMIPS32_REV8 0x8000
#define PRID_IMP_BMIPS3300 0x9000
#define PRID_IMP_BMIPS3300_ALT 0x9100
#define PRID_IMP_BMIPS3300_BUG 0x0000
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index fd1d39e..455c0ac 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -249,7 +249,8 @@
#define SET_PERSONALITY(ex) \
do { \
- set_personality(PER_LINUX); \
+ if (personality(current->personality) != PER_LINUX) \
+ set_personality(PER_LINUX); \
\
current->thread.abi = &mips_abi; \
} while (0)
@@ -296,6 +297,8 @@
#define SET_PERSONALITY(ex) \
do { \
+ unsigned int p; \
+ \
clear_thread_flag(TIF_32BIT_REGS); \
clear_thread_flag(TIF_32BIT_ADDR); \
\
@@ -304,7 +307,8 @@
else \
current->thread.abi = &mips_abi; \
\
- if (current->personality != PER_LINUX32) \
+ p = personality(current->personality); \
+ if (p != PER_LINUX32 && p != PER_LINUX) \
set_personality(PER_LINUX); \
} while (0)
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index c98bf51..5b017f2 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -329,10 +329,14 @@
"dsrl32 %L0, %L0, 0" "\n\t" \
"dsll32 %M0, %M0, 0" "\n\t" \
"or %L0, %L0, %M0" "\n\t" \
+ ".set push" "\n\t" \
+ ".set noreorder" "\n\t" \
+ ".set nomacro" "\n\t" \
"sd %L0, %2" "\n\t" \
+ ".set pop" "\n\t" \
".set mips0" "\n" \
: "=r" (__tmp) \
- : "0" (__val), "m" (*__mem)); \
+ : "0" (__val), "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else \
@@ -355,12 +359,16 @@
local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
+ ".set push" "\n\t" \
+ ".set noreorder" "\n\t" \
+ ".set nomacro" "\n\t" \
"ld %L0, %1" "\n\t" \
+ ".set pop" "\n\t" \
"dsra32 %M0, %L0, 0" "\n\t" \
"sll %L0, %L0, 0" "\n\t" \
".set mips0" "\n" \
: "=r" (__val) \
- : "m" (*__mem)); \
+ : "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else { \
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index 7919d76..07d3fad 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -201,7 +201,6 @@
}
int __init ar7_gpio_init(void);
-
-int __init ar7_gpio_init(void);
+void __init ar7_init_clocks(void);
#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
index c58ebd8..9759588 100644
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -12,6 +12,7 @@
#define __NVRAM_H
#include <linux/types.h>
+#include <linux/kernel.h>
struct nvram_header {
u32 magic;
@@ -36,4 +37,10 @@
extern int nvram_getenv(char *name, char *val, size_t val_len);
+static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+{
+ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+ &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+}
+
#endif
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 5742bb4..5c0a357 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -5,7 +5,7 @@
*
* Copyright (c) 2009 Qi Hardware inc.,
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
+ * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or later
@@ -235,7 +235,7 @@
QI_LB60_GPIO_KEYIN(3),
QI_LB60_GPIO_KEYIN(4),
QI_LB60_GPIO_KEYIN(5),
- QI_LB60_GPIO_KEYIN(7),
+ QI_LB60_GPIO_KEYIN(6),
QI_LB60_GPIO_KEYIN8,
};
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index 95bc2b5..1cc9e54 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -208,7 +208,7 @@
/* PCM */
struct platform_device jz4740_pcm_device = {
- .name = "jz4740-pcm",
+ .name = "jz4740-pcm-audio",
.id = -1,
};
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index cfeac15..4a70407 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -23,7 +23,7 @@
#include <asm/bootinfo.h>
#include <asm/mach-jz4740/base.h>
-void jz4740_init_cmdline(int argc, char *argv[])
+static __init void jz4740_init_cmdline(int argc, char *argv[])
{
unsigned int count = COMMAND_LINE_SIZE - 1;
int i;
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 2f4d7a9..98c5a97 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -32,7 +32,7 @@
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
return res;
}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 71620e1..68dae7b 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -905,7 +905,8 @@
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
- case PRID_IMP_BMIPS32:
+ case PRID_IMP_BMIPS32_REV4:
+ case PRID_IMP_BMIPS32_REV8:
c->cputype = CPU_BMIPS32;
__cpu_name[cpu] = "Broadcom BMIPS32";
break;
@@ -933,10 +934,6 @@
__cpu_name[cpu] = "Broadcom BMIPS5000";
c->options |= MIPS_CPU_ULRI;
break;
- case PRID_IMP_BMIPS4KC:
- c->cputype = CPU_4KC;
- __cpu_name[cpu] = "MIPS 4Kc";
- break;
}
}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 6343b4a..876a75c 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -251,14 +251,15 @@
SYSCALL_DEFINE1(32_personality, unsigned long, personality)
{
+ unsigned int p = personality & 0xffffffff;
int ret;
- personality &= 0xffffffff;
+
if (personality(current->personality) == PER_LINUX32 &&
- personality == PER_LINUX)
- personality = PER_LINUX32;
- ret = sys_personality(personality);
- if (ret == PER_LINUX32)
- ret = PER_LINUX;
+ personality(p) == PER_LINUX)
+ p = (p & ~PER_MASK) | PER_LINUX32;
+ ret = sys_personality(p);
+ if (ret != -1 && personality(ret) == PER_LINUX32)
+ ret = (ret & ~PER_MASK) | PER_LINUX;
return ret;
}
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 9996094..ae167df 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -142,7 +142,6 @@
childregs->regs[7] = 0; /* Clear error flag */
childregs->regs[2] = 0; /* Child gets zero as return value */
- regs->regs[2] = p->pid;
if (childregs->cp0_status & ST0_CU0) {
childregs->regs[28] = (unsigned long) ti;
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index e000b27..9dbe583 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -100,7 +100,7 @@
return;
base = virt_to_phys((void *)initial_boot_params);
- size = initial_boot_params->totalsize;
+ size = be32_to_cpu(initial_boot_params->totalsize);
/* Before we do anything, lets reserve the dt blob */
reserve_mem_mach(base, size);
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 43e7cdc5..c0e8141 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -153,7 +153,7 @@
{
extern int gic_present;
- /* This is Malta specific: IPI,performance and timer inetrrupts */
+ /* This is Malta specific: IPI,performance and timer interrupts */
if (gic_present)
change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
STATUSF_IP6 | STATUSF_IP7);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 8e9fbe7..e971043 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -83,7 +83,8 @@
extern asmlinkage void handle_reserved(void);
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
- struct mips_fpu_struct *ctx, int has_fpu);
+ struct mips_fpu_struct *ctx, int has_fpu,
+ void *__user *fault_addr);
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
@@ -661,12 +662,36 @@
force_sig_info(SIGFPE, &info, current);
}
+static int process_fpemu_return(int sig, void __user *fault_addr)
+{
+ if (sig == SIGSEGV || sig == SIGBUS) {
+ struct siginfo si = {0};
+ si.si_addr = fault_addr;
+ si.si_signo = sig;
+ if (sig == SIGSEGV) {
+ if (find_vma(current->mm, (unsigned long)fault_addr))
+ si.si_code = SEGV_ACCERR;
+ else
+ si.si_code = SEGV_MAPERR;
+ } else {
+ si.si_code = BUS_ADRERR;
+ }
+ force_sig_info(sig, &si, current);
+ return 1;
+ } else if (sig) {
+ force_sig(sig, current);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
/*
* XXX Delayed fp exceptions when doing a lazy ctx switch XXX
*/
asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
{
- siginfo_t info;
+ siginfo_t info = {0};
if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
== NOTIFY_STOP)
@@ -675,6 +700,7 @@
if (fcr31 & FPU_CSR_UNI_X) {
int sig;
+ void __user *fault_addr = NULL;
/*
* Unimplemented operation exception. If we've got the full
@@ -690,7 +716,8 @@
lose_fpu(1);
/* Run the emulator */
- sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1);
+ sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1,
+ &fault_addr);
/*
* We can't allow the emulated instruction to leave any of
@@ -702,8 +729,7 @@
own_fpu(1); /* Using the FPU again. */
/* If something went wrong, signal */
- if (sig)
- force_sig(sig, current);
+ process_fpemu_return(sig, fault_addr);
return;
} else if (fcr31 & FPU_CSR_INV_X)
@@ -996,11 +1022,11 @@
if (!raw_cpu_has_fpu) {
int sig;
+ void __user *fault_addr = NULL;
sig = fpu_emulator_cop1Handler(regs,
- ¤t->thread.fpu, 0);
- if (sig)
- force_sig(sig, current);
- else
+ ¤t->thread.fpu,
+ 0, &fault_addr);
+ if (!process_fpemu_return(sig, fault_addr))
mt_ase_fp_affinity();
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3eb3cde..6a1fdfe 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1092,6 +1092,10 @@
/* this of-course trashes what was there before... */
v->pbuffer = vmalloc(P_SIZE);
+ if (!v->pbuffer) {
+ pr_warning("VPE loader: unable to allocate memory\n");
+ return -ENOMEM;
+ }
v->plen = P_SIZE;
v->load_addr = NULL;
v->len = 0;
@@ -1149,10 +1153,9 @@
if (ret < 0)
v->shared_ptr = NULL;
- // cleanup any temp buffers
- if (v->pbuffer)
- vfree(v->pbuffer);
+ vfree(v->pbuffer);
v->plen = 0;
+
return ret;
}
@@ -1169,11 +1172,6 @@
if (v == NULL)
return -ENODEV;
- if (v->pbuffer == NULL) {
- printk(KERN_ERR "VPE loader: no buffer for program\n");
- return -ENOMEM;
- }
-
if ((count + v->len) > v->plen) {
printk(KERN_WARNING
"VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 77dc3b2..606c8a9 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -161,16 +161,16 @@
.Lfwd_fixup:
PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
andi a2, 0x3f
+ LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
.Lpartial_fixup:
PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
andi a2, LONGMASK
+ LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index ae4cff9..11b193f 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -29,9 +29,9 @@
#define parse_even_earlier(res, option, p) \
do { \
+ int ret; \
if (strncmp(option, (char *)p, strlen(option)) == 0) \
- strict_strtol((char *)p + strlen(option"="), \
- 10, &res); \
+ ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
} while (0)
void __init prom_init_env(void)
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index b2ad1b0..d32cb05 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -64,7 +64,7 @@
#if __mips >= 4 && __mips != 32
static int fpux_emu(struct pt_regs *,
- struct mips_fpu_struct *, mips_instruction);
+ struct mips_fpu_struct *, mips_instruction, void *__user *);
#endif
/* Further private data for which no space exists in mips_fpu_struct */
@@ -208,16 +208,23 @@
* Two instructions if the instruction is in a branch delay slot.
*/
-static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
+static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+ void *__user *fault_addr)
{
mips_instruction ir;
unsigned long emulpc, contpc;
unsigned int cond;
- if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
/* XXX NEC Vr54xx bug workaround */
if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir))
@@ -245,10 +252,16 @@
#endif
return SIGILL;
}
- if (get_user(ir, (mips_instruction __user *) emulpc)) {
+ if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)emulpc;
return SIGBUS;
}
+ if (__get_user(ir, (mips_instruction __user *) emulpc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)emulpc;
+ return SIGSEGV;
+ }
/* __compute_return_epc() will have updated cp0_epc */
contpc = xcp->cp0_epc;
/* In order not to confuse ptrace() et al, tweak context */
@@ -269,10 +282,17 @@
u64 val;
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+
+ if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
DITOREG(val, MIPSInst_RT(ir));
break;
}
@@ -284,10 +304,16 @@
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_RT(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
}
@@ -297,10 +323,16 @@
u32 val;
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
SITOREG(val, MIPSInst_RT(ir));
break;
}
@@ -312,10 +344,16 @@
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_RT(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
}
@@ -440,10 +478,17 @@
contpc = (xcp->cp0_epc +
(MIPSInst_SIMM(ir) << 2));
- if (get_user(ir,
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc,
+ sizeof(mips_instruction))) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGBUS;
+ }
+ if (__get_user(ir,
(mips_instruction __user *) xcp->cp0_epc)) {
MIPS_FPU_EMU_INC_STATS(errors);
- return SIGBUS;
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
}
switch (MIPSInst_OPCODE(ir)) {
@@ -506,9 +551,8 @@
#if __mips >= 4 && __mips != 32
case cop1x_op:{
- int sig;
-
- if ((sig = fpux_emu(xcp, ctx, ir)))
+ int sig = fpux_emu(xcp, ctx, ir, fault_addr);
+ if (sig)
return sig;
break;
}
@@ -604,7 +648,7 @@
DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);
static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
- mips_instruction ir)
+ mips_instruction ir, void *__user *fault_addr)
{
unsigned rcsr = 0; /* resulting csr */
@@ -624,10 +668,16 @@
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
SITOREG(val, MIPSInst_FD(ir));
break;
@@ -638,9 +688,15 @@
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_FS(ir));
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGBUS;
+ }
if (put_user(val, va)) {
MIPS_FPU_EMU_INC_STATS(errors);
- return SIGBUS;
+ *fault_addr = va;
+ return SIGSEGV;
}
break;
@@ -701,10 +757,16 @@
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
DITOREG(val, MIPSInst_FD(ir));
break;
@@ -714,10 +776,16 @@
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_FS(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
case madd_d_op:
@@ -1242,7 +1310,7 @@
}
int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
- int has_fpu)
+ int has_fpu, void *__user *fault_addr)
{
unsigned long oldepc, prevepc;
mips_instruction insn;
@@ -1252,10 +1320,16 @@
do {
prevepc = xcp->cp0_epc;
- if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
if (insn == 0)
xcp->cp0_epc += 4; /* skip nops */
else {
@@ -1267,7 +1341,7 @@
*/
/* convert to ieee library modes */
ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
- sig = cop1Emulate(xcp, ctx);
+ sig = cop1Emulate(xcp, ctx, fault_addr);
/* revert to mips rounding mode */
ieee754_csr.rm = mips_rm[ieee754_csr.rm];
}
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 4fc1a0f..21ea14e 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -288,7 +288,7 @@
return plat_dma_supported(dev, mask);
}
-void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
@@ -298,6 +298,8 @@
__dma_sync((unsigned long)vaddr, size, direction);
}
+EXPORT_SYMBOL(dma_cache_sync);
+
static struct dma_map_ops mips_default_dma_map_ops = {
.alloc_coherent = mips_dma_alloc_coherent,
.free_coherent = mips_dma_free_coherent,
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 505feca..9cca8de 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -68,6 +68,9 @@
*/
static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
{
+ unsigned int config2 = read_c0_config2();
+ unsigned int tmp;
+
/* Check the bypass bit (L2B) */
switch (c->cputype) {
case CPU_34K:
@@ -83,6 +86,7 @@
c->scache.linesz = 2 << tmp;
else
return 0;
+ return 1;
}
static inline int __init mips_sc_probe(void)
diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c
index b7f1d9c..434d7b1 100644
--- a/arch/mips/pmc-sierra/yosemite/py-console.c
+++ b/arch/mips/pmc-sierra/yosemite/py-console.c
@@ -65,11 +65,15 @@
__asm__ __volatile__ (
" .set mips3 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set nomacro \n"
" ld %0, %1 \n"
+ " .set pop \n"
" lbu %0, (%0) \n"
" .set mips0 \n"
: "=r" (res)
- : "m" (vaddr));
+ : "R" (vaddr));
write_c0_status(sr);
ssnop_4();
@@ -89,11 +93,15 @@
__asm__ __volatile__ (
" .set mips3 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set nomacro \n"
" ld %0, %1 \n"
+ " .set pop \n"
" sb %2, (%0) \n"
" .set mips0 \n"
: "=&r" (tmp)
- : "m" (vaddr), "r" (c));
+ : "R" (vaddr), "r" (c));
write_c0_status(sr);
ssnop_4();
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index c308989..41707a2 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -82,7 +82,7 @@
enum swarm_rtc_type {
RTC_NONE,
RTC_XICOR,
- RTC_M4LT81
+ RTC_M41T81,
};
enum swarm_rtc_type swarm_rtc_type;
@@ -96,7 +96,7 @@
sec = xicor_get_time();
break;
- case RTC_M4LT81:
+ case RTC_M41T81:
sec = m41t81_get_time();
break;
@@ -115,7 +115,7 @@
case RTC_XICOR:
return xicor_set_time(sec);
- case RTC_M4LT81:
+ case RTC_M41T81:
return m41t81_set_time(sec);
case RTC_NONE:
@@ -141,7 +141,7 @@
if (xicor_probe())
swarm_rtc_type = RTC_XICOR;
if (m41t81_probe())
- swarm_rtc_type = RTC_M4LT81;
+ swarm_rtc_type = RTC_M41T81;
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
index f860a34..75da468 100644
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@@ -40,21 +40,17 @@
unsigned long long ll;
unsigned l[2];
} tsc64, result;
- unsigned long tsc, tmp;
+ unsigned long tmp;
unsigned product[3]; /* 96-bit intermediate value */
/* cnt32_to_63() is not safe with preemption */
preempt_disable();
- /* read the TSC value
- */
- tsc = get_cycles();
-
- /* expand to 64-bits.
+ /* expand the tsc to 64-bits.
* - sched_clock() must be called once a minute or better or the
* following will go horribly wrong - see cnt32_to_63()
*/
- tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
+ tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL;
preempt_enable();
diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h
index c1ee1d6..81d92a4 100644
--- a/arch/tile/include/asm/signal.h
+++ b/arch/tile/include/asm/signal.h
@@ -25,7 +25,7 @@
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
struct pt_regs;
-int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
void do_signal(struct pt_regs *regs);
#endif
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index 543d6a3..dbb0dfc 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -290,12 +290,12 @@
return ret;
}
+/* The assembly shim for this function arranges to ignore the return value. */
long compat_sys_rt_sigreturn(struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame =
(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
@@ -308,13 +308,13 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index f5821626..5eed4a0 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -1342,8 +1342,8 @@
lw r20, r20
/* Jump to syscall handler. */
- jalr r20; .Lhandle_syscall_link:
- FEEDBACK_REENTER(handle_syscall)
+ jalr r20
+.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */
/*
* Write our r0 onto the stack so it gets restored instead
@@ -1352,6 +1352,9 @@
PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
sw r29, r0
+.Lsyscall_sigreturn_skip:
+ FEEDBACK_REENTER(handle_syscall)
+
/* Do syscall trace again, if requested. */
lw r30, r31
andi r30, r30, _TIF_SYSCALL_TRACE
@@ -1536,9 +1539,24 @@
}; \
STD_ENDPROC(_##x)
+/*
+ * Special-case sigreturn to not write r0 to the stack on return.
+ * This is technically more efficient, but it also avoids difficulties
+ * in the 64-bit OS when handling 32-bit compat code, since we must not
+ * sign-extend r0 for the sigreturn return-value case.
+ */
+#define PTREGS_SYSCALL_SIGRETURN(x, reg) \
+ STD_ENTRY(_##x); \
+ addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
+ { \
+ PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
+ j x \
+ }; \
+ STD_ENDPROC(_##x)
+
PTREGS_SYSCALL(sys_execve, r3)
PTREGS_SYSCALL(sys_sigaltstack, r2)
-PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
/* Save additional callee-saves to pt_regs, put address in r4 and jump. */
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 8430f45..e90eb53 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -212,6 +212,13 @@
childregs->sp = sp; /* override with new user stack pointer */
/*
+ * If CLONE_SETTLS is set, set "tp" in the new task to "r4",
+ * which is passed in as arg #5 to sys_clone().
+ */
+ if (clone_flags & CLONE_SETTLS)
+ childregs->tp = regs->regs[4];
+
+ /*
* Copy the callee-saved registers from the passed pt_regs struct
* into the context-switch callee-saved registers area.
* This way when we start the interrupt-return sequence, the
@@ -539,6 +546,7 @@
return __switch_to(prev, next, next_current_ksp0(next));
}
+/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */
SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
void __user *, parent_tidptr, void __user *, child_tidptr,
struct pt_regs *, regs)
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 757407e..1260321 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -52,7 +52,7 @@
*/
int restore_sigcontext(struct pt_regs *regs,
- struct sigcontext __user *sc, long *pr0)
+ struct sigcontext __user *sc)
{
int err = 0;
int i;
@@ -75,17 +75,15 @@
regs->faultnum = INT_SWINT_1_SIGRETURN;
- err |= __get_user(*pr0, &sc->gregs[0]);
return err;
}
-/* sigreturn() returns long since it restores r0 in the interrupted code. */
+/* The assembly shim for this function arranges to ignore the return value. */
SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
@@ -98,13 +96,13 @@
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 23f315c..325c052 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -355,7 +355,7 @@
if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
- if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
+ if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
error("Destination address too large");
#endif
#ifndef CONFIG_RELOCATABLE
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 5be1542..e99d55d 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -72,6 +72,9 @@
#define BIOS_BEGIN 0x000a0000
#define BIOS_END 0x00100000
+#define BIOS_ROM_BASE 0xffe00000
+#define BIOS_ROM_END 0xffffffff
+
#ifdef __KERNEL__
/* see comment in arch/x86/kernel/e820.c */
extern struct e820map e820;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 9e6fe39..f702f82 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -79,7 +79,7 @@
#define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
#define KVM_MIN_FREE_MMU_PAGES 5
#define KVM_REFILL_PAGES 25
-#define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_MAX_CPUID_ENTRIES 80
#define KVM_NR_FIXED_MTRR_REGION 88
#define KVM_NR_VAR_MTRR 8
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9e13763..1e99475 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -45,6 +45,7 @@
obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o
obj-y += tsc.o io_delay.o rtc.o
obj-y += pci-iommu_table.o
+obj-y += resource.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3f838d5..7821813 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1389,6 +1389,14 @@
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
+
+ /*
+ * Now that local APIC setup is completed for BP, configure the fault
+ * handling for interrupt remapping.
+ */
+ if (!smp_processor_id() && intr_remapping_enabled)
+ enable_drhd_fault_handling();
+
}
#ifdef CONFIG_X86_X2APIC
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7cc0a72..fadcd74 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2430,13 +2430,12 @@
{
struct irq_cfg *cfg = data->chip_data;
int i, do_unmask_irq = 0, irq = data->irq;
- struct irq_desc *desc = irq_to_desc(irq);
unsigned long v;
irq_complete_move(cfg);
#ifdef CONFIG_GENERIC_PENDING_IRQ
/* If we are moving the irq we need to mask it */
- if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+ if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
do_unmask_irq = 1;
mask_ioapic(cfg);
}
@@ -3413,6 +3412,7 @@
msg.data |= MSI_DATA_VECTOR(cfg->vector);
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+ msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
dmar_msi_write(irq, &msg);
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index f9e4e6a..d8c4a6f 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -79,13 +79,6 @@
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
}
-
- /*
- * Now that apic routing model is selected, configure the
- * fault handling for intr remapping.
- */
- if (intr_remapping_enabled)
- enable_drhd_fault_handling();
}
/* Same for both flat and physical. */
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index bcece91..c0dbd9a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -60,16 +60,18 @@
#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
#endif
+/* Number of possible pages in the lowmem region */
+LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
+
/* Enough space to fit pagetables for the low memory linear map */
-MAPPING_BEYOND_END = \
- PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
/*
* Worst-case size of the kernel mapping we need to make:
- * the worst-case size of the kernel itself, plus the extra we need
- * to map for the linear map.
+ * a relocatable kernel can live anywhere in lowmem, so we need to be able
+ * to map all of lowmem.
*/
-KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
+KERNEL_PAGES = LOWMEM_PAGES
INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
RESERVE_BRK(pagetables, INIT_MAP_SIZE)
@@ -620,13 +622,13 @@
__PAGE_ALIGNED_BSS
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
-initial_pg_pmd:
+ENTRY(initial_pg_pmd)
.fill 1024*KPMDS,4,0
#else
ENTRY(initial_page_table)
.fill 1024,4,0
#endif
-initial_pg_fixmap:
+ENTRY(initial_pg_fixmap)
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ae03cab..4ff5968 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -27,6 +27,9 @@
#define HPET_DEV_FSB_CAP 0x1000
#define HPET_DEV_PERI_CAP 0x2000
+#define HPET_MIN_CYCLES 128
+#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
/*
@@ -299,8 +302,9 @@
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
- /* 5 usec minimum reprogramming delta. */
- hpet_clockevent.min_delta_ns = 5000;
+ /* Setup minimum reprogramming delta. */
+ hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+ &hpet_clockevent);
/*
* Start hpet with the boot cpu mask and make it
@@ -393,22 +397,24 @@
* the wraparound into account) nor a simple count down event
* mode. Further the write to the comparator register is
* delayed internally up to two HPET clock cycles in certain
- * chipsets (ATI, ICH9,10). We worked around that by reading
- * back the compare register, but that required another
- * workaround for ICH9,10 chips where the first readout after
- * write can return the old stale value. We already have a
- * minimum delta of 5us enforced, but a NMI or SMI hitting
+ * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+ * longer delays. We worked around that by reading back the
+ * compare register, but that required another workaround for
+ * ICH9,10 chips where the first readout after write can
+ * return the old stale value. We already had a minimum
+ * programming delta of 5us enforced, but a NMI or SMI hitting
* between the counter readout and the comparator write can
* move us behind that point easily. Now instead of reading
* the compare register back several times, we make the ETIME
* decision based on the following: Return ETIME if the
- * counter value after the write is less than 8 HPET cycles
+ * counter value after the write is less than HPET_MIN_CYCLES
* away from the event or if the counter is already ahead of
- * the event.
+ * the event. The minimum programming delta for the generic
+ * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
*/
res = (s32)(cnt - hpet_readl(HPET_COUNTER));
- return res < 8 ? -ETIME : 0;
+ return res < HPET_MIN_CYCLES ? -ETIME : 0;
}
static void hpet_legacy_set_mode(enum clock_event_mode mode,
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
new file mode 100644
index 0000000..2a26819
--- /dev/null
+++ b/arch/x86/kernel/resource.c
@@ -0,0 +1,48 @@
+#include <linux/ioport.h>
+#include <asm/e820.h>
+
+static void resource_clip(struct resource *res, resource_size_t start,
+ resource_size_t end)
+{
+ resource_size_t low = 0, high = 0;
+
+ if (res->end < start || res->start > end)
+ return; /* no conflict */
+
+ if (res->start < start)
+ low = start - res->start;
+
+ if (res->end > end)
+ high = res->end - end;
+
+ /* Keep the area above or below the conflict, whichever is larger */
+ if (low > high)
+ res->end = start - 1;
+ else
+ res->start = end + 1;
+}
+
+static void remove_e820_regions(struct resource *avail)
+{
+ int i;
+ struct e820entry *entry;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ entry = &e820.map[i];
+
+ resource_clip(avail, entry->addr,
+ entry->addr + entry->size - 1);
+ }
+}
+
+void arch_remove_reservations(struct resource *avail)
+{
+ /* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
+ if (avail->flags & IORESOURCE_MEM) {
+ if (avail->start < BIOS_END)
+ avail->start = BIOS_END;
+ resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+ remove_e820_regions(avail);
+ }
+}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 21c6746..85268f8 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -769,7 +769,6 @@
x86_init.oem.arch_setup();
- resource_alloc_from_bottom = 0;
iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
setup_memory_map();
parse_setup_data();
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 9c253bd..5471285 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -394,7 +394,8 @@
* Setup init_xstate_buf to represent the init state of
* all the features managed by the xsave
*/
- init_xstate_buf = alloc_bootmem(xstate_size);
+ init_xstate_buf = alloc_bootmem_align(xstate_size,
+ __alignof__(struct xsave_struct));
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
clts();
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1ca1229..b81a9b7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3494,6 +3494,10 @@
static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
{
switch (func) {
+ case 0x00000001:
+ /* Mask out xsave bit as long as it is not supported by SVM */
+ entry->ecx &= ~(bit(X86_FEATURE_XSAVE));
+ break;
case 0x80000001:
if (nested)
entry->ecx |= (1 << 2); /* Set SVM bit */
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ff21fdd..81fcbe9 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4227,11 +4227,6 @@
return PT_PDPE_LEVEL;
}
-static inline u32 bit(int bitno)
-{
- return 1 << (bitno & 31);
-}
-
static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cdac9e5..b989e1f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -155,11 +155,6 @@
u64 __read_mostly host_xcr0;
-static inline u32 bit(int bitno)
-{
- return 1 << (bitno & 31);
-}
-
static void kvm_on_user_return(struct user_return_notifier *urn)
{
unsigned slot;
@@ -4569,9 +4564,11 @@
#ifdef CONFIG_CPU_FREQ
struct cpufreq_policy policy;
memset(&policy, 0, sizeof(policy));
- cpufreq_get_policy(&policy, get_cpu());
+ cpu = get_cpu();
+ cpufreq_get_policy(&policy, cpu);
if (policy.cpuinfo.max_freq)
max_tsc_khz = policy.cpuinfo.max_freq;
+ put_cpu();
#endif
cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
@@ -5522,6 +5519,8 @@
mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
+ if (sregs->cr4 & X86_CR4_OSXSAVE)
+ update_cpuid(vcpu);
if (!is_long_mode(vcpu) && is_pae(vcpu)) {
load_pdptrs(vcpu, vcpu->arch.walk_mmu, vcpu->arch.cr3);
mmu_reset_needed = 1;
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 2cea414..c600da8 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -70,6 +70,11 @@
return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
}
+static inline u32 bit(int bitno)
+{
+ return 1 << (bitno & 31);
+}
+
void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 73b1e1a..4996cf5 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -531,7 +531,10 @@
{
lguest_data.pgdir = cr3;
lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
- cr3_changed = true;
+
+ /* These two page tables are simple, linear, and used during boot */
+ if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table))
+ cr3_changed = true;
}
static unsigned long lguest_read_cr3(void)
@@ -703,9 +706,9 @@
* to forget all of them. Fortunately, this is very rare.
*
* ... except in early boot when the kernel sets up the initial pagetables,
- * which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
- * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds.
+ * which makes booting astonishingly slow: 48 seconds! So we don't even tell
+ * the Host anything changed until we've done the first real page table switch,
+ * which brings boot back to 4.3 seconds.
*/
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
@@ -1002,7 +1005,7 @@
clockevents_register_device(&lguest_clockevent);
/* Finally, we unblock the timer interrupt. */
- enable_lguest_irq(0);
+ clear_bit(0, lguest_data.blocked_interrupts);
}
/*
@@ -1349,9 +1352,6 @@
*/
switch_to_new_gdt(0);
- /* We actually boot with all memory mapped, but let's say 128MB. */
- max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
-
/*
* The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index 4f420c2f..e7d5382 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -4,6 +4,7 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
+#include <asm/pgtable.h>
/*G:020
* Our story starts with the kernel booting into startup_32 in
@@ -37,9 +38,113 @@
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
+ call init_pagetables
+
/* Jumps are relative: we're running __PAGE_OFFSET too low. */
jmp lguest_init+__PAGE_OFFSET
+/*
+ * Initialize page tables. This creates a PDE and a set of page
+ * tables, which are located immediately beyond __brk_base. The variable
+ * _brk_end is set up to point to the first "safe" location.
+ * Mappings are created both at virtual address 0 (identity mapping)
+ * and PAGE_OFFSET for up to _end.
+ *
+ * FIXME: This code is taken verbatim from arch/x86/kernel/head_32.S: they
+ * don't have a stack at this point, so we can't just use call and ret.
+ */
+init_pagetables:
+#if PTRS_PER_PMD > 1
+#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD)
+#else
+#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
+#endif
+#define pa(X) ((X) - __PAGE_OFFSET)
+
+/* Enough space to fit pagetables for the low memory linear map */
+MAPPING_BEYOND_END = \
+ PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+#ifdef CONFIG_X86_PAE
+
+ /*
+ * In PAE mode initial_page_table is statically defined to contain
+ * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3
+ * entries). The identity mapping is handled by pointing two PGD entries
+ * to the first kernel PMD.
+ *
+ * Note the upper half of each PMD or PTE are always zero at this stage.
+ */
+
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
+
+ xorl %ebx,%ebx /* %ebx is kept at zero */
+
+ movl $pa(__brk_base), %edi
+ movl $pa(initial_pg_pmd), %edx
+ movl $PTE_IDENT_ATTR, %eax
+10:
+ leal PDE_IDENT_ATTR(%edi),%ecx /* Create PMD entry */
+ movl %ecx,(%edx) /* Store PMD entry */
+ /* Upper half already zero */
+ addl $8,%edx
+ movl $512,%ecx
+11:
+ stosl
+ xchgl %eax,%ebx
+ stosl
+ xchgl %eax,%ebx
+ addl $0x1000,%eax
+ loop 11b
+
+ /*
+ * End condition: we must map up to the end + MAPPING_BEYOND_END.
+ */
+ movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+ cmpl %ebp,%eax
+ jb 10b
+1:
+ addl $__PAGE_OFFSET, %edi
+ movl %edi, pa(_brk_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
+
+ /* Do early initialization of the fixmap area */
+ movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+ movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
+#else /* Not PAE */
+
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+ movl $pa(__brk_base), %edi
+ movl $pa(initial_page_table), %edx
+ movl $PTE_IDENT_ATTR, %eax
+10:
+ leal PDE_IDENT_ATTR(%edi),%ecx /* Create PDE entry */
+ movl %ecx,(%edx) /* Store identity PDE entry */
+ movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
+ addl $4,%edx
+ movl $1024, %ecx
+11:
+ stosl
+ addl $0x1000,%eax
+ loop 11b
+ /*
+ * End condition: we must map up to the end + MAPPING_BEYOND_END.
+ */
+ movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+ cmpl %ebp,%eax
+ jb 10b
+ addl $__PAGE_OFFSET, %edi
+ movl %edi, pa(_brk_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
+
+ /* Do early initialization of the fixmap area */
+ movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+ movl %eax,pa(initial_page_table+0xffc)
+#endif
+ ret
+
/*G:055
* We create a macro which puts the assembler code between lgstart_ and lgend_
* markers. These templates are put in the .text section: they can't be
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index c4bb261..b1805b7 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -65,21 +65,13 @@
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
- resource_size_t start = round_down(res->end - size + 1, align);
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
-
- /*
- * If we're avoiding ISA aliases, the largest contiguous I/O
- * port space is 256 bytes. Clearing bits 9 and 10 preserves
- * all 256-byte and smaller alignments, so the result will
- * still be correctly aligned.
- */
- if (!skip_isa_ioresource_align(dev))
- start &= ~0x300;
- } else if (res->flags & IORESOURCE_MEM) {
- if (start < BIOS_END)
- start = res->end; /* fail; no space */
+ if (skip_isa_ioresource_align(dev))
+ return start;
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
}
return start;
}
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 4a2afa1..b6552b1 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -25,7 +25,7 @@
export CPPFLAGS_vdso.lds += -P -C
-VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \
+VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
$(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
@@ -69,7 +69,7 @@
vdso32-images = $(vdso32.so-y:%=vdso32-%.so)
CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds)
-VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1
+VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1
# This makes sure the $(obj) subdirectory exists even though vdso32/
# is not a kbuild sub-make subdirectory.
diff --git a/block/blk-map.c b/block/blk-map.c
index 5d5dbe4..e663ac2 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -201,12 +201,13 @@
for (i = 0; i < iov_count; i++) {
unsigned long uaddr = (unsigned long)iov[i].iov_base;
+ if (!iov[i].iov_len)
+ return -EINVAL;
+
if (uaddr & queue_dma_alignment(q)) {
unaligned = 1;
break;
}
- if (!iov[i].iov_len)
- return -EINVAL;
}
if (unaligned || (q->dma_pad_mask & len) || map_data)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 77b7c26..74bc4a7 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -21,7 +21,7 @@
return 0;
fbio = bio;
- cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+ cluster = blk_queue_cluster(q);
seg_size = 0;
nr_phys_segs = 0;
for_each_bio(bio) {
@@ -87,7 +87,7 @@
static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio,
struct bio *nxt)
{
- if (!test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+ if (!blk_queue_cluster(q))
return 0;
if (bio->bi_seg_back_size + nxt->bi_seg_front_size >
@@ -123,7 +123,7 @@
int nsegs, cluster;
nsegs = 0;
- cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+ cluster = blk_queue_cluster(q);
/*
* for each bio in rq
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 701859f..36c8c1f 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -126,7 +126,7 @@
lim->alignment_offset = 0;
lim->io_opt = 0;
lim->misaligned = 0;
- lim->no_cluster = 0;
+ lim->cluster = 1;
}
EXPORT_SYMBOL(blk_set_default_limits);
@@ -229,8 +229,8 @@
EXPORT_SYMBOL(blk_queue_bounce_limit);
/**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q: the request queue for the device
+ * blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request
+ * @limits: the queue limits
* @max_hw_sectors: max hardware sectors in the usual 512b unit
*
* Description:
@@ -244,7 +244,7 @@
* per-device basis in /sys/block/<device>/queue/max_sectors_kb.
* The soft limit can not exceed max_hw_sectors.
**/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors)
{
if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
@@ -252,9 +252,23 @@
__func__, max_hw_sectors);
}
- q->limits.max_hw_sectors = max_hw_sectors;
- q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
- BLK_DEF_MAX_SECTORS);
+ limits->max_hw_sectors = max_hw_sectors;
+ limits->max_sectors = min_t(unsigned int, max_hw_sectors,
+ BLK_DEF_MAX_SECTORS);
+}
+EXPORT_SYMBOL(blk_limits_max_hw_sectors);
+
+/**
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
+ * @q: the request queue for the device
+ * @max_hw_sectors: max hardware sectors in the usual 512b unit
+ *
+ * Description:
+ * See description for blk_limits_max_hw_sectors().
+ **/
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+{
+ blk_limits_max_hw_sectors(&q->limits, max_hw_sectors);
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
@@ -464,15 +478,6 @@
void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
{
blk_stack_limits(&t->limits, &b->limits, 0);
-
- if (!t->queue_lock)
- WARN_ON_ONCE(1);
- else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
- unsigned long flags;
- spin_lock_irqsave(t->queue_lock, flags);
- queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
- spin_unlock_irqrestore(t->queue_lock, flags);
- }
}
EXPORT_SYMBOL(blk_queue_stack_limits);
@@ -545,7 +550,7 @@
t->io_min = max(t->io_min, b->io_min);
t->io_opt = lcm(t->io_opt, b->io_opt);
- t->no_cluster |= b->no_cluster;
+ t->cluster &= b->cluster;
t->discard_zeroes_data &= b->discard_zeroes_data;
/* Physical block size a multiple of the logical block size? */
@@ -641,7 +646,6 @@
sector_t offset)
{
struct request_queue *t = disk->queue;
- struct request_queue *b = bdev_get_queue(bdev);
if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
@@ -652,17 +656,6 @@
printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
top, bottom);
}
-
- if (!t->queue_lock)
- WARN_ON_ONCE(1);
- else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
- unsigned long flags;
-
- spin_lock_irqsave(t->queue_lock, flags);
- if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
- queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
- spin_unlock_irqrestore(t->queue_lock, flags);
- }
}
EXPORT_SYMBOL(disk_stack_limits);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 013457f..41fb691 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -119,7 +119,7 @@
static ssize_t queue_max_segment_size_show(struct request_queue *q, char *page)
{
- if (test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+ if (blk_queue_cluster(q))
return queue_var_show(queue_max_segment_size(q), (page));
return queue_var_show(PAGE_CACHE_SIZE, (page));
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 004be80..381b09b 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -355,6 +355,12 @@
tg->slice_end[rw], jiffies);
}
+static inline void throtl_set_slice_end(struct throtl_data *td,
+ struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
+{
+ tg->slice_end[rw] = roundup(jiffy_end, throtl_slice);
+}
+
static inline void throtl_extend_slice(struct throtl_data *td,
struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
{
@@ -391,6 +397,16 @@
if (throtl_slice_used(td, tg, rw))
return;
+ /*
+ * A bio has been dispatched. Also adjust slice_end. It might happen
+ * that initially cgroup limit was very low resulting in high
+ * slice_end, but later limit was bumped up and bio was dispached
+ * sooner, then we need to reduce slice_end. A high bogus slice_end
+ * is bad because it does not allow new slice to start.
+ */
+
+ throtl_set_slice_end(td, tg, rw, jiffies + throtl_slice);
+
time_elapsed = jiffies - tg->slice_start[rw];
nr_slices = time_elapsed / throtl_slice;
@@ -709,26 +725,21 @@
struct throtl_grp *tg;
struct hlist_node *pos, *n;
- /*
- * Make sure atomic_inc() effects from
- * throtl_update_blkio_group_read_bps(), group of functions are
- * visible.
- * Is this required or smp_mb__after_atomic_inc() was suffcient
- * after the atomic_inc().
- */
- smp_rmb();
if (!atomic_read(&td->limits_changed))
return;
throtl_log(td, "limit changed =%d", atomic_read(&td->limits_changed));
- hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
- /*
- * Do I need an smp_rmb() here to make sure tg->limits_changed
- * update is visible. I am relying on smp_rmb() at the
- * beginning of function and not putting a new one here.
- */
+ /*
+ * Make sure updates from throtl_update_blkio_group_read_bps() group
+ * of functions to tg->limits_changed are visible. We do not
+ * want update td->limits_changed to be visible but update to
+ * tg->limits_changed not being visible yet on this cpu. Hence
+ * the read barrier.
+ */
+ smp_rmb();
+ hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
if (throtl_tg_on_rr(tg) && tg->limits_changed) {
throtl_log_tg(td, tg, "limit change rbps=%llu wbps=%llu"
" riops=%u wiops=%u", tg->bps[READ],
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index f291587..8e0f925 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2834,6 +2834,8 @@
InquiryData_struct *inq_buff = NULL;
for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
+ if (!h->drv[logvol])
+ continue;
if (memcmp(h->drv[logvol]->LunID, drv->LunID,
sizeof(drv->LunID)) == 0) {
FOUND = 1;
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 89d8a7c..24487d4 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -3627,17 +3627,19 @@
}
shs = drbd_cmd_handler[cmd].pkt_size - sizeof(union p_header);
- rv = drbd_recv(mdev, &header->h80.payload, shs);
- if (unlikely(rv != shs)) {
- dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
- goto err_out;
- }
-
if (packet_size - shs > 0 && !drbd_cmd_handler[cmd].expect_payload) {
dev_err(DEV, "No payload expected %s l:%d\n", cmdname(cmd), packet_size);
goto err_out;
}
+ if (shs) {
+ rv = drbd_recv(mdev, &header->h80.payload, shs);
+ if (unlikely(rv != shs)) {
+ dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
+ goto err_out;
+ }
+ }
+
rv = drbd_cmd_handler[cmd].function(mdev, cmd, packet_size - shs);
if (unlikely(!rv)) {
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index 181ea03..ab2bd09 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -339,7 +339,8 @@
}
/* completion of master bio is outside of spinlock.
- * If you need it irqsave, do it your self! */
+ * If you need it irqsave, do it your self!
+ * Which means: don't use from bio endio callback. */
static inline int req_mod(struct drbd_request *req,
enum drbd_req_event what)
{
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 47d223c..34f224b 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -193,8 +193,10 @@
*/
void drbd_endio_pri(struct bio *bio, int error)
{
+ unsigned long flags;
struct drbd_request *req = bio->bi_private;
struct drbd_conf *mdev = req->mdev;
+ struct bio_and_error m;
enum drbd_req_event what;
int uptodate = bio_flagged(bio, BIO_UPTODATE);
@@ -220,7 +222,13 @@
bio_put(req->private_bio);
req->private_bio = ERR_PTR(error);
- req_mod(req, what);
+ /* not req_mod(), we need irqsave here! */
+ spin_lock_irqsave(&mdev->req_lock, flags);
+ __req_mod(req, what, &m);
+ spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+ if (m.bio)
+ complete_master_bio(mdev, &m);
}
int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index d68d3aa..f975d24 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -283,16 +283,21 @@
} while (delay);
}
+static void __sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+{
+ if (delta > p->max_match_value)
+ dev_warn(&p->pdev->dev, "delta out of range\n");
+
+ p->next_match_value = delta;
+ sh_cmt_clock_event_program_verify(p, 0);
+}
+
static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
{
unsigned long flags;
- if (delta > p->max_match_value)
- dev_warn(&p->pdev->dev, "delta out of range\n");
-
spin_lock_irqsave(&p->lock, flags);
- p->next_match_value = delta;
- sh_cmt_clock_event_program_verify(p, 0);
+ __sh_cmt_set_next(p, delta);
spin_unlock_irqrestore(&p->lock, flags);
}
@@ -359,7 +364,7 @@
/* setup timeout if no clockevent */
if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
- sh_cmt_set_next(p, p->max_match_value);
+ __sh_cmt_set_next(p, p->max_match_value);
out:
spin_unlock_irqrestore(&p->lock, flags);
@@ -381,7 +386,7 @@
/* adjust the timeout to maximum if only clocksource left */
if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
- sh_cmt_set_next(p, p->max_match_value);
+ __sh_cmt_set_next(p, p->max_match_value);
spin_unlock_irqrestore(&p->lock, flags);
}
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index e3f7fc6..68f09a8 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -534,76 +534,73 @@
}
#undef OLD_KEY_MAX
-static int evdev_handle_get_keycode(struct input_dev *dev,
- void __user *p, size_t size)
+static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
+{
+ struct input_keymap_entry ke = {
+ .len = sizeof(unsigned int),
+ .flags = 0,
+ };
+ int __user *ip = (int __user *)p;
+ int error;
+
+ /* legacy case */
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
+
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
+
+ if (put_user(ke.keycode, ip + 1))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int evdev_handle_get_keycode_v2(struct input_dev *dev, void __user *p)
{
struct input_keymap_entry ke;
int error;
- memset(&ke, 0, sizeof(ke));
+ if (copy_from_user(&ke, p, sizeof(ke)))
+ return -EFAULT;
- if (size == sizeof(unsigned int[2])) {
- /* legacy case */
- int __user *ip = (int __user *)p;
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
- if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
- return -EFAULT;
+ if (copy_to_user(p, &ke, sizeof(ke)))
+ return -EFAULT;
- ke.len = sizeof(unsigned int);
- ke.flags = 0;
-
- error = input_get_keycode(dev, &ke);
- if (error)
- return error;
-
- if (put_user(ke.keycode, ip + 1))
- return -EFAULT;
-
- } else {
- size = min(size, sizeof(ke));
-
- if (copy_from_user(&ke, p, size))
- return -EFAULT;
-
- error = input_get_keycode(dev, &ke);
- if (error)
- return error;
-
- if (copy_to_user(p, &ke, size))
- return -EFAULT;
- }
return 0;
}
-static int evdev_handle_set_keycode(struct input_dev *dev,
- void __user *p, size_t size)
+static int evdev_handle_set_keycode(struct input_dev *dev, void __user *p)
+{
+ struct input_keymap_entry ke = {
+ .len = sizeof(unsigned int),
+ .flags = 0,
+ };
+ int __user *ip = (int __user *)p;
+
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
+
+ if (get_user(ke.keycode, ip + 1))
+ return -EFAULT;
+
+ return input_set_keycode(dev, &ke);
+}
+
+static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p)
{
struct input_keymap_entry ke;
- memset(&ke, 0, sizeof(ke));
+ if (copy_from_user(&ke, p, sizeof(ke)))
+ return -EFAULT;
- if (size == sizeof(unsigned int[2])) {
- /* legacy case */
- int __user *ip = (int __user *)p;
-
- if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
- return -EFAULT;
-
- if (get_user(ke.keycode, ip + 1))
- return -EFAULT;
-
- ke.len = sizeof(unsigned int);
- ke.flags = 0;
-
- } else {
- size = min(size, sizeof(ke));
-
- if (copy_from_user(&ke, p, size))
- return -EFAULT;
-
- if (ke.len > sizeof(ke.scancode))
- return -EINVAL;
- }
+ if (ke.len > sizeof(ke.scancode))
+ return -EINVAL;
return input_set_keycode(dev, &ke);
}
@@ -669,6 +666,18 @@
return evdev_grab(evdev, client);
else
return evdev_ungrab(evdev, client);
+
+ case EVIOCGKEYCODE:
+ return evdev_handle_get_keycode(dev, p);
+
+ case EVIOCSKEYCODE:
+ return evdev_handle_set_keycode(dev, p);
+
+ case EVIOCGKEYCODE_V2:
+ return evdev_handle_get_keycode_v2(dev, p);
+
+ case EVIOCSKEYCODE_V2:
+ return evdev_handle_set_keycode_v2(dev, p);
}
size = _IOC_SIZE(cmd);
@@ -708,12 +717,6 @@
return -EFAULT;
return error;
-
- case EVIOC_MASK_SIZE(EVIOCGKEYCODE):
- return evdev_handle_get_keycode(dev, p, size);
-
- case EVIOC_MASK_SIZE(EVIOCSKEYCODE):
- return evdev_handle_set_keycode(dev, p, size);
}
/* Multi-number variable-length handlers */
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a72e61d..0e2a19c 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -65,7 +65,6 @@
static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
-static int *keymap;
static unsigned int *row_gpios;
static unsigned int *col_gpios;
@@ -162,20 +161,11 @@
}
}
-static inline int omap_kp_find_key(int col, int row)
-{
- int i, key;
-
- key = KEY(col, row, 0);
- for (i = 0; keymap[i] != 0; i++)
- if ((keymap[i] & 0xff000000) == key)
- return keymap[i] & 0x00ffffff;
- return -1;
-}
-
static void omap_kp_tasklet(unsigned long data)
{
struct omap_kp *omap_kp_data = (struct omap_kp *) data;
+ unsigned short *keycodes = omap_kp_data->input->keycode;
+ unsigned int row_shift = get_count_order(omap_kp_data->cols);
unsigned char new_state[8], changed, key_down = 0;
int col, row;
int spurious = 0;
@@ -199,7 +189,7 @@
row, (new_state[col] & (1 << row)) ?
"pressed" : "released");
#else
- key = omap_kp_find_key(col, row);
+ key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
if (key < 0) {
printk(KERN_WARNING
"omap-keypad: Spurious key event %d-%d\n",
@@ -298,13 +288,18 @@
struct input_dev *input_dev;
struct omap_kp_platform_data *pdata = pdev->dev.platform_data;
int i, col_idx, row_idx, irq_idx, ret;
+ unsigned int row_shift, keycodemax;
- if (!pdata->rows || !pdata->cols || !pdata->keymap) {
- printk(KERN_ERR "No rows, cols or keymap from pdata\n");
+ if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
+ printk(KERN_ERR "No rows, cols or keymap_data from pdata\n");
return -EINVAL;
}
- omap_kp = kzalloc(sizeof(struct omap_kp), GFP_KERNEL);
+ row_shift = get_count_order(pdata->cols);
+ keycodemax = pdata->rows << row_shift;
+
+ omap_kp = kzalloc(sizeof(struct omap_kp) +
+ keycodemax * sizeof(unsigned short), GFP_KERNEL);
input_dev = input_allocate_device();
if (!omap_kp || !input_dev) {
kfree(omap_kp);
@@ -320,7 +315,9 @@
if (!cpu_is_omap24xx())
omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- keymap = pdata->keymap;
+ input_dev->keycode = &omap_kp[1];
+ input_dev->keycodesize = sizeof(unsigned short);
+ input_dev->keycodemax = keycodemax;
if (pdata->rep)
__set_bit(EV_REP, input_dev->evbit);
@@ -374,8 +371,8 @@
/* setup input device */
__set_bit(EV_KEY, input_dev->evbit);
- for (i = 0; keymap[i] != 0; i++)
- __set_bit(keymap[i] & KEY_MAX, input_dev->keybit);
+ matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
+ input_dev->keycode, input_dev->keybit);
input_dev->name = "omap-keypad";
input_dev->phys = "omap-keypad/input0";
input_dev->dev.parent = &pdev->dev;
@@ -416,7 +413,7 @@
return 0;
err5:
for (i = irq_idx - 1; i >=0; i--)
- free_irq(row_gpios[i], 0);
+ free_irq(row_gpios[i], NULL);
err4:
input_unregister_device(omap_kp->input);
input_dev = NULL;
@@ -447,11 +444,11 @@
gpio_free(col_gpios[i]);
for (i = 0; i < omap_kp->rows; i++) {
gpio_free(row_gpios[i]);
- free_irq(gpio_to_irq(row_gpios[i]), 0);
+ free_irq(gpio_to_irq(row_gpios[i]), NULL);
}
} else {
omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- free_irq(omap_kp->irq, 0);
+ free_irq(omap_kp->irq, NULL);
}
del_timer_sync(&omap_kp->timer);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 4852b44..435b0af 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1436,6 +1436,8 @@
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static const struct wacom_features wacom_features_0xD4 =
+ { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD8 =
{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xDA =
@@ -1510,6 +1512,7 @@
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
+ { USB_DEVICE_WACOM(0xD4) },
{ USB_DEVICE_WACOM(0xD8) },
{ USB_DEVICE_WACOM(0xDA) },
{ USB_DEVICE_WACOM(0xDB) },
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 90267f8..4d705ce 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -517,9 +517,8 @@
*/
if (q->merge_bvec_fn && !ti->type->merge)
- limits->max_sectors =
- min_not_zero(limits->max_sectors,
- (unsigned int) (PAGE_SIZE >> 9));
+ blk_limits_max_hw_sectors(limits,
+ (unsigned int) (PAGE_SIZE >> 9));
return 0;
}
EXPORT_SYMBOL_GPL(dm_set_device_limits);
@@ -1131,11 +1130,6 @@
*/
q->limits = *limits;
- if (limits->no_cluster)
- queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
- else
- queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
-
if (!dm_table_supports_discards(t))
queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
else
diff --git a/drivers/md/md.c b/drivers/md/md.c
index e71c5fa..175c424f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4295,9 +4295,6 @@
goto abort;
mddev->queue->queuedata = mddev;
- /* Can be unlocked because the queue is new: no concurrency */
- queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, mddev->queue);
-
blk_queue_make_request(mddev->queue, md_make_request);
disk = alloc_disk(1 << shift);
diff --git a/drivers/media/common/saa7146_hlp.c b/drivers/media/common/saa7146_hlp.c
index 05bde9c..1d1d8d2 100644
--- a/drivers/media/common/saa7146_hlp.c
+++ b/drivers/media/common/saa7146_hlp.c
@@ -558,7 +558,7 @@
static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
{
struct saa7146_vv *vv = dev->vv_data;
- struct saa7146_format *sfmt = format_by_fourcc(dev, pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
int b_depth = vv->ov_fmt->depth;
int b_bpl = vv->ov_fb.fmt.bytesperline;
@@ -702,7 +702,7 @@
struct saa7146_vv *vv = dev->vv_data;
struct saa7146_video_dma vdma1;
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
int width = buf->fmt->width;
int height = buf->fmt->height;
@@ -827,7 +827,7 @@
struct saa7146_video_dma vdma2;
struct saa7146_video_dma vdma3;
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
int width = buf->fmt->width;
int height = buf->fmt->height;
@@ -994,7 +994,7 @@
void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
{
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
struct saa7146_vv *vv = dev->vv_data;
u32 vdma1_prot_addr;
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 741c573..d246910 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -84,7 +84,7 @@
static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format);
-struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc)
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
{
int i, j = NUM_FORMATS;
@@ -266,7 +266,7 @@
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
struct scatterlist *list = dma->sglist;
int length = dma->sglen;
- struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
@@ -408,7 +408,7 @@
}
}
- fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
/* we need to have a valid format set here */
BUG_ON(NULL == fmt);
@@ -460,7 +460,7 @@
return -EBUSY;
}
- fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
/* we need to have a valid format set here */
BUG_ON(NULL == fmt);
@@ -536,7 +536,7 @@
return -EPERM;
/* check args */
- fmt = format_by_fourcc(dev, fb->fmt.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
if (NULL == fmt)
return -EINVAL;
@@ -760,7 +760,7 @@
DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh));
- fmt = format_by_fourcc(dev, f->fmt.pix.pixelformat);
+ fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
if (NULL == fmt)
return -EINVAL;
@@ -1264,7 +1264,7 @@
buf->fmt = &fh->video_fmt;
buf->vb.field = fh->video_fmt.field;
- sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
release_all_pagetables(dev, buf);
if( 0 != IS_PLANAR(sfmt->trans)) {
@@ -1378,7 +1378,7 @@
fh->video_fmt.pixelformat = V4L2_PIX_FMT_BGR24;
fh->video_fmt.bytesperline = 0;
fh->video_fmt.field = V4L2_FIELD_ANY;
- sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+ sfmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8;
videobuf_queue_sg_init(&fh->video_q, &video_qops,
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 5bf4985..05e832f 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -361,7 +361,7 @@
static const struct v4l2_file_operations rtrack_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
@@ -412,13 +412,6 @@
rt->vdev.release = video_device_release_empty;
video_set_drvdata(&rt->vdev, rt);
- if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(&rt->v4l2_dev);
- release_region(rt->io, 2);
- return -EINVAL;
- }
- v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
-
/* Set up the I/O locking */
mutex_init(&rt->lock);
@@ -430,6 +423,13 @@
sleep_delay(2000000); /* make sure it's totally down */
outb(0xc0, rt->io); /* steady volume, mute card */
+ if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(&rt->v4l2_dev);
+ release_region(rt->io, 2);
+ return -EINVAL;
+ }
+ v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
+
return 0;
}
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index c223113..dd8a6ab 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -324,7 +324,7 @@
static const struct v4l2_file_operations aztech_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
@@ -375,6 +375,8 @@
az->vdev.ioctl_ops = &aztech_ioctl_ops;
az->vdev.release = video_device_release_empty;
video_set_drvdata(&az->vdev, az);
+ /* mute card - prevents noisy bootups */
+ outb(0, az->io);
if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
@@ -383,8 +385,6 @@
}
v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
- /* mute card - prevents noisy bootups */
- outb(0, az->io);
return 0;
}
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index b701ea6..bc9ad08 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -328,11 +328,10 @@
unsigned char readbuf[RDS_BUFFER];
int i = 0;
+ mutex_lock(&dev->lock);
if (dev->rdsstat == 0) {
- mutex_lock(&dev->lock);
dev->rdsstat = 1;
outb(0x80, dev->io); /* Select RDS fifo */
- mutex_unlock(&dev->lock);
init_timer(&dev->readtimer);
dev->readtimer.function = cadet_handler;
dev->readtimer.data = (unsigned long)dev;
@@ -340,12 +339,15 @@
add_timer(&dev->readtimer);
}
if (dev->rdsin == dev->rdsout) {
+ mutex_unlock(&dev->lock);
if (file->f_flags & O_NONBLOCK)
return -EWOULDBLOCK;
interruptible_sleep_on(&dev->read_queue);
+ mutex_lock(&dev->lock);
}
while (i < count && dev->rdsin != dev->rdsout)
readbuf[i++] = dev->rdsbuf[dev->rdsout++];
+ mutex_unlock(&dev->lock);
if (copy_to_user(data, readbuf, i))
return -EFAULT;
@@ -525,9 +527,11 @@
{
struct cadet *dev = video_drvdata(file);
+ mutex_lock(&dev->lock);
dev->users++;
if (1 == dev->users)
init_waitqueue_head(&dev->read_queue);
+ mutex_unlock(&dev->lock);
return 0;
}
@@ -535,11 +539,13 @@
{
struct cadet *dev = video_drvdata(file);
+ mutex_lock(&dev->lock);
dev->users--;
if (0 == dev->users) {
del_timer_sync(&dev->readtimer);
dev->rdsstat = 0;
}
+ mutex_unlock(&dev->lock);
return 0;
}
@@ -559,7 +565,7 @@
.open = cadet_open,
.release = cadet_release,
.read = cadet_read,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = cadet_poll,
};
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index 7903967..28fa85b 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -361,7 +361,7 @@
static const struct v4l2_file_operations gemtek_pci_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
@@ -422,11 +422,11 @@
card->vdev.release = video_device_release_empty;
video_set_drvdata(&card->vdev, card);
+ gemtek_pci_mute(card);
+
if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0)
goto err_video;
- gemtek_pci_mute(card);
-
v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
pdev->revision, card->iobase, card->iobase + card->length - 1);
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 73985f6..2599364 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -378,7 +378,7 @@
static const struct v4l2_file_operations gemtek_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int vidioc_querycap(struct file *file, void *priv,
@@ -577,12 +577,6 @@
gt->vdev.release = video_device_release_empty;
video_set_drvdata(>->vdev, gt);
- if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(gt->io, 1);
- return -EBUSY;
- }
-
/* Set defaults */
gt->lastfreq = GEMTEK_LOWFREQ;
gt->bu2614data = 0;
@@ -590,6 +584,12 @@
if (initmute)
gemtek_mute(gt);
+ if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(gt->io, 1);
+ return -EBUSY;
+ }
+
return 0;
}
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index 08f1051..6af61bf 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -299,7 +299,7 @@
static const struct v4l2_file_operations maestro_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops maestro_ioctl_ops = {
@@ -383,22 +383,20 @@
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+ if (!radio_power_on(dev)) {
+ retval = -EIO;
+ goto errfr1;
+ }
+
retval = video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr);
if (retval) {
v4l2_err(v4l2_dev, "can't register video device!\n");
goto errfr1;
}
- if (!radio_power_on(dev)) {
- retval = -EIO;
- goto errunr;
- }
-
v4l2_info(v4l2_dev, "version " DRIVER_VERSION "\n");
return 0;
-errunr:
- video_unregister_device(&dev->vdev);
errfr1:
v4l2_device_unregister(v4l2_dev);
errfr:
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 255d40d..6459a22 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -346,7 +346,7 @@
static const struct v4l2_file_operations maxiradio_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
diff --git a/drivers/media/radio/radio-miropcm20.c b/drivers/media/radio/radio-miropcm20.c
index 4ff8854..3fb76e3 100644
--- a/drivers/media/radio/radio-miropcm20.c
+++ b/drivers/media/radio/radio-miropcm20.c
@@ -33,6 +33,7 @@
unsigned long freq;
int muted;
struct snd_miro_aci *aci;
+ struct mutex lock;
};
static struct pcm20 pcm20_card = {
@@ -72,7 +73,7 @@
static const struct v4l2_file_operations pcm20_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int vidioc_querycap(struct file *file, void *priv,
@@ -229,7 +230,7 @@
return -ENODEV;
}
strlcpy(v4l2_dev->name, "miropcm20", sizeof(v4l2_dev->name));
-
+ mutex_init(&dev->lock);
res = v4l2_device_register(NULL, v4l2_dev);
if (res < 0) {
@@ -242,6 +243,7 @@
dev->vdev.fops = &pcm20_fops;
dev->vdev.ioctl_ops = &pcm20_ioctl_ops;
dev->vdev.release = video_device_release_empty;
+ dev->vdev.lock = &dev->lock;
video_set_drvdata(&dev->vdev, dev);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0)
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index a79296a..8d6ea59 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -266,7 +266,7 @@
static const struct v4l2_file_operations rtrack2_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = {
@@ -315,6 +315,10 @@
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+ /* mute card - prevents noisy bootups */
+ outb(1, dev->io);
+ dev->muted = 1;
+
mutex_init(&dev->lock);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
@@ -324,10 +328,6 @@
v4l2_info(v4l2_dev, "AIMSlab Radiotrack II card driver.\n");
- /* mute card - prevents noisy bootups */
- outb(1, dev->io);
- dev->muted = 1;
-
return 0;
}
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 985359d1..b5a5f89 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -260,7 +260,7 @@
static const struct v4l2_file_operations fmi_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
@@ -382,6 +382,9 @@
mutex_init(&fmi->lock);
+ /* mute card - prevents noisy bootups */
+ fmi_mute(fmi);
+
if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmi->io, 2);
@@ -391,8 +394,6 @@
}
v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
- /* mute card - prevents noisy bootups */
- fmi_mute(fmi);
return 0;
}
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 52c7bbb..dc3f04c 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -376,7 +376,7 @@
static const struct v4l2_file_operations fmr2_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
@@ -424,6 +424,10 @@
fmr2->vdev.release = video_device_release_empty;
video_set_drvdata(&fmr2->vdev, fmr2);
+ /* mute card - prevents noisy bootups */
+ fmr2_mute(fmr2->io);
+ fmr2_product_info(fmr2);
+
if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmr2->io, 2);
@@ -431,11 +435,6 @@
}
v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
- /* mute card - prevents noisy bootups */
- mutex_lock(&fmr2->lock);
- fmr2_mute(fmr2->io);
- fmr2_product_info(fmr2);
- mutex_unlock(&fmr2->lock);
debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
return 0;
}
diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c
index 03829e6..726d367 100644
--- a/drivers/media/radio/radio-si4713.c
+++ b/drivers/media/radio/radio-si4713.c
@@ -53,7 +53,8 @@
/* radio_si4713_fops - file operations interface */
static const struct v4l2_file_operations radio_si4713_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ /* Note: locking is done at the subdev level in the i2c driver. */
+ .unlocked_ioctl = video_ioctl2,
};
/* Video4Linux Interface */
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 789d2ec..0e71d81 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -142,7 +142,6 @@
struct video_device *videodev;
struct tea5764_regs regs;
struct mutex mutex;
- int users;
};
/* I2C code related */
@@ -458,41 +457,10 @@
return 0;
}
-static int tea5764_open(struct file *file)
-{
- /* Currently we support only one device */
- struct tea5764_device *radio = video_drvdata(file);
-
- mutex_lock(&radio->mutex);
- /* Only exclusive access */
- if (radio->users) {
- mutex_unlock(&radio->mutex);
- return -EBUSY;
- }
- radio->users++;
- mutex_unlock(&radio->mutex);
- file->private_data = radio;
- return 0;
-}
-
-static int tea5764_close(struct file *file)
-{
- struct tea5764_device *radio = video_drvdata(file);
-
- if (!radio)
- return -ENODEV;
- mutex_lock(&radio->mutex);
- radio->users--;
- mutex_unlock(&radio->mutex);
- return 0;
-}
-
/* File system interface */
static const struct v4l2_file_operations tea5764_fops = {
.owner = THIS_MODULE,
- .open = tea5764_open,
- .release = tea5764_close,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
@@ -527,7 +495,7 @@
int ret;
PDEBUG("probe");
- radio = kmalloc(sizeof(struct tea5764_device), GFP_KERNEL);
+ radio = kzalloc(sizeof(struct tea5764_device), GFP_KERNEL);
if (!radio)
return -ENOMEM;
@@ -555,12 +523,7 @@
i2c_set_clientdata(client, radio);
video_set_drvdata(radio->videodev, radio);
-
- ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
- if (ret < 0) {
- PWARN("Could not register video device!");
- goto errrel;
- }
+ radio->videodev->lock = &radio->mutex;
/* initialize and power off the chip */
tea5764_i2c_read(radio);
@@ -568,6 +531,12 @@
tea5764_mute(radio, 1);
tea5764_power_down(radio);
+ ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+ if (ret < 0) {
+ PWARN("Could not register video device!");
+ goto errrel;
+ }
+
PINFO("registered.");
return 0;
errrel:
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index fc1c860..a326639 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -338,7 +338,7 @@
static const struct v4l2_file_operations terratec_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops terratec_ioctl_ops = {
@@ -389,6 +389,9 @@
mutex_init(&tt->lock);
+ /* mute card - prevents noisy bootups */
+ tt_write_vol(tt, 0);
+
if (video_register_device(&tt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&tt->v4l2_dev);
release_region(tt->io, 2);
@@ -396,9 +399,6 @@
}
v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver.\n");
-
- /* mute card - prevents noisy bootups */
- tt_write_vol(tt, 0);
return 0;
}
diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c
index b8bb3ef..a185610 100644
--- a/drivers/media/radio/radio-timb.c
+++ b/drivers/media/radio/radio-timb.c
@@ -34,6 +34,7 @@
struct v4l2_subdev *sd_dsp;
struct video_device video_dev;
struct v4l2_device v4l2_dev;
+ struct mutex lock;
};
@@ -142,7 +143,7 @@
static const struct v4l2_file_operations timbradio_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int __devinit timbradio_probe(struct platform_device *pdev)
@@ -164,6 +165,7 @@
}
tr->pdata = *pdata;
+ mutex_init(&tr->lock);
strlcpy(tr->video_dev.name, "Timberdale Radio",
sizeof(tr->video_dev.name));
@@ -171,6 +173,7 @@
tr->video_dev.ioctl_ops = &timbradio_ioctl_ops;
tr->video_dev.release = video_device_release_empty;
tr->video_dev.minor = -1;
+ tr->video_dev.lock = &tr->lock;
strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
err = v4l2_device_register(NULL, &tr->v4l2_dev);
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index 9d6dcf8..22fa9cc 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -344,7 +344,7 @@
static const struct v4l2_file_operations trust_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops trust_ioctl_ops = {
@@ -396,14 +396,6 @@
tr->vdev.release = video_device_release_empty;
video_set_drvdata(&tr->vdev, tr);
- if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(tr->io, 2);
- return -EINVAL;
- }
-
- v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
-
write_i2c(tr, 2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */
write_i2c(tr, 2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */
write_i2c(tr, 2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */
@@ -418,6 +410,14 @@
/* mute card - prevents noisy bootups */
tr_setmute(tr, 1);
+ if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(tr->io, 2);
+ return -EINVAL;
+ }
+
+ v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
+
return 0;
}
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index b1f6305..8dbbf08f 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -317,7 +317,7 @@
static const struct v4l2_file_operations typhoon_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
@@ -344,18 +344,18 @@
strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
dev->io = io;
- dev->curfreq = dev->mutefreq = mutefreq;
if (dev->io == -1) {
v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
return -EINVAL;
}
- if (dev->mutefreq < 87000 || dev->mutefreq > 108500) {
+ if (mutefreq < 87000 || mutefreq > 108500) {
v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
return -EINVAL;
}
+ dev->curfreq = dev->mutefreq = mutefreq << 4;
mutex_init(&dev->lock);
if (!request_region(dev->io, 8, "typhoon")) {
@@ -378,17 +378,17 @@
dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+
+ /* mute card - prevents noisy bootups */
+ typhoon_mute(dev);
+
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&dev->v4l2_dev);
release_region(dev->io, 8);
return -EINVAL;
}
v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
- v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", dev->mutefreq);
- dev->mutefreq <<= 4;
-
- /* mute card - prevents noisy bootups */
- typhoon_mute(dev);
+ v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq);
return 0;
}
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index f31eab9..af99c5b 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -377,7 +377,7 @@
static const struct v4l2_file_operations zoltrix_fops =
{
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = {
@@ -424,20 +424,6 @@
return res;
}
- strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
- zol->vdev.v4l2_dev = v4l2_dev;
- zol->vdev.fops = &zoltrix_fops;
- zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
- zol->vdev.release = video_device_release_empty;
- video_set_drvdata(&zol->vdev, zol);
-
- if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(zol->io, 2);
- return -EINVAL;
- }
- v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
-
mutex_init(&zol->lock);
/* mute card - prevents noisy bootups */
@@ -452,6 +438,20 @@
zol->curvol = 0;
zol->stereo = 1;
+ strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
+ zol->vdev.v4l2_dev = v4l2_dev;
+ zol->vdev.fops = &zoltrix_fops;
+ zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
+ zol->vdev.release = video_device_release_empty;
+ video_set_drvdata(&zol->vdev, zol);
+
+ if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(zol->io, 2);
+ return -EINVAL;
+ }
+ v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
+
return 0;
}
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 31e7a12..f989f28 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -712,7 +712,7 @@
static const struct v4l2_file_operations ar_fops = {
.owner = THIS_MODULE,
.read = ar_read,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops ar_ioctl_ops = {
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a529619..0902ec0 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -854,7 +854,6 @@
xbits |= RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM;
/* is it free? */
- mutex_lock(&btv->lock);
if (btv->resources & xbits) {
/* no, someone else uses it */
goto fail;
@@ -884,11 +883,9 @@
/* it's free, grab it */
fh->resources |= bit;
btv->resources |= bit;
- mutex_unlock(&btv->lock);
return 1;
fail:
- mutex_unlock(&btv->lock);
return 0;
}
@@ -940,7 +937,6 @@
/* trying to free ressources not allocated by us ... */
printk("bttv: BUG! (btres)\n");
}
- mutex_lock(&btv->lock);
fh->resources &= ~bits;
btv->resources &= ~bits;
@@ -951,8 +947,6 @@
if (0 == (bits & VBI_RESOURCES))
disclaim_vbi_lines(btv);
-
- mutex_unlock(&btv->lock);
}
/* ----------------------------------------------------------------------- */
@@ -1713,28 +1707,20 @@
/* Make sure tvnorm and vbi_end remain consistent
until we're done. */
- mutex_lock(&btv->lock);
norm = btv->tvnorm;
/* In this mode capturing always starts at defrect.top
(default VDELAY), ignoring cropping parameters. */
if (btv->vbi_end > bttv_tvnorms[norm].cropcap.defrect.top) {
- mutex_unlock(&btv->lock);
return -EINVAL;
}
- mutex_unlock(&btv->lock);
-
c.rect = bttv_tvnorms[norm].cropcap.defrect;
} else {
- mutex_lock(&btv->lock);
-
norm = btv->tvnorm;
c = btv->crop[!!fh->do_crop];
- mutex_unlock(&btv->lock);
-
if (width < c.min_scaled_width ||
width > c.max_scaled_width ||
height < c.min_scaled_height)
@@ -1858,7 +1844,6 @@
unsigned int i;
int err;
- mutex_lock(&btv->lock);
err = v4l2_prio_check(&btv->prio, fh->prio);
if (err)
goto err;
@@ -1874,7 +1859,6 @@
set_tvnorm(btv, i);
err:
- mutex_unlock(&btv->lock);
return err;
}
@@ -1898,7 +1882,6 @@
struct bttv *btv = fh->btv;
int rc = 0;
- mutex_lock(&btv->lock);
if (i->index >= bttv_tvcards[btv->c.type].video_inputs) {
rc = -EINVAL;
goto err;
@@ -1928,7 +1911,6 @@
i->std = BTTV_NORMS;
err:
- mutex_unlock(&btv->lock);
return rc;
}
@@ -1938,9 +1920,7 @@
struct bttv_fh *fh = priv;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
*i = btv->input;
- mutex_unlock(&btv->lock);
return 0;
}
@@ -1952,7 +1932,6 @@
int err;
- mutex_lock(&btv->lock);
err = v4l2_prio_check(&btv->prio, fh->prio);
if (unlikely(err))
goto err;
@@ -1965,7 +1944,6 @@
set_input(btv, i, btv->tvnorm);
err:
- mutex_unlock(&btv->lock);
return 0;
}
@@ -1979,7 +1957,6 @@
if (unlikely(0 != t->index))
return -EINVAL;
- mutex_lock(&btv->lock);
if (unlikely(btv->tuner_type == TUNER_ABSENT)) {
err = -EINVAL;
goto err;
@@ -1995,7 +1972,6 @@
btv->audio_mode_gpio(btv, t, 1);
err:
- mutex_unlock(&btv->lock);
return 0;
}
@@ -2006,10 +1982,8 @@
struct bttv_fh *fh = priv;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = btv->freq;
- mutex_unlock(&btv->lock);
return 0;
}
@@ -2024,7 +1998,6 @@
if (unlikely(f->tuner != 0))
return -EINVAL;
- mutex_lock(&btv->lock);
err = v4l2_prio_check(&btv->prio, fh->prio);
if (unlikely(err))
goto err;
@@ -2039,7 +2012,6 @@
if (btv->has_matchbox && btv->radio_user)
tea5757_set_freq(btv, btv->freq);
err:
- mutex_unlock(&btv->lock);
return 0;
}
@@ -2172,7 +2144,6 @@
/* Make sure tvnorm, vbi_end and the current cropping parameters
remain consistent until we're done. */
- mutex_lock(&btv->lock);
b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds;
@@ -2250,7 +2221,6 @@
rc = 0; /* success */
fail:
- mutex_unlock(&btv->lock);
return rc;
}
@@ -2282,9 +2252,7 @@
if (V4L2_FIELD_ANY == field) {
__s32 height2;
- mutex_lock(&fh->btv->lock);
height2 = fh->btv->crop[!!fh->do_crop].rect.height >> 1;
- mutex_unlock(&fh->btv->lock);
field = (win->w.height > height2)
? V4L2_FIELD_INTERLACED
: V4L2_FIELD_TOP;
@@ -2360,7 +2328,6 @@
}
}
- mutex_lock(&fh->cap.vb_lock);
/* clip against screen */
if (NULL != btv->fbuf.base)
n = btcx_screen_clips(btv->fbuf.fmt.width, btv->fbuf.fmt.height,
@@ -2391,13 +2358,6 @@
fh->ov.field = win->field;
fh->ov.setup_ok = 1;
- /*
- * FIXME: btv is protected by btv->lock mutex, while btv->init
- * is protected by fh->cap.vb_lock. This seems to open the
- * possibility for some race situations. Maybe the better would
- * be to unify those locks or to use another way to store the
- * init values that will be consumed by videobuf callbacks
- */
btv->init.ov.w.width = win->w.width;
btv->init.ov.w.height = win->w.height;
btv->init.ov.field = win->field;
@@ -2412,7 +2372,6 @@
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
retval = bttv_switch_overlay(btv,fh,new);
}
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
@@ -2526,9 +2485,7 @@
if (V4L2_FIELD_ANY == field) {
__s32 height2;
- mutex_lock(&btv->lock);
height2 = btv->crop[!!fh->do_crop].rect.height >> 1;
- mutex_unlock(&btv->lock);
field = (f->fmt.pix.height > height2)
? V4L2_FIELD_INTERLACED
: V4L2_FIELD_BOTTOM;
@@ -2614,7 +2571,6 @@
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
/* update our state informations */
- mutex_lock(&fh->cap.vb_lock);
fh->fmt = fmt;
fh->cap.field = f->fmt.pix.field;
fh->cap.last = V4L2_FIELD_NONE;
@@ -2623,7 +2579,6 @@
btv->init.fmt = fmt;
btv->init.width = f->fmt.pix.width;
btv->init.height = f->fmt.pix.height;
- mutex_unlock(&fh->cap.vb_lock);
return 0;
}
@@ -2649,11 +2604,9 @@
unsigned int i;
struct bttv_fh *fh = priv;
- mutex_lock(&fh->cap.vb_lock);
retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
V4L2_MEMORY_MMAP);
if (retval < 0) {
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
@@ -2665,7 +2618,6 @@
for (i = 0; i < gbuffers; i++)
mbuf->offsets[i] = i * gbufsize;
- mutex_unlock(&fh->cap.vb_lock);
return 0;
}
#endif
@@ -2775,10 +2727,8 @@
int retval = 0;
if (on) {
- mutex_lock(&fh->cap.vb_lock);
/* verify args */
if (unlikely(!btv->fbuf.base)) {
- mutex_unlock(&fh->cap.vb_lock);
return -EINVAL;
}
if (unlikely(!fh->ov.setup_ok)) {
@@ -2787,13 +2737,11 @@
}
if (retval)
return retval;
- mutex_unlock(&fh->cap.vb_lock);
}
if (!check_alloc_btres_lock(btv, fh, RESOURCE_OVERLAY))
return -EBUSY;
- mutex_lock(&fh->cap.vb_lock);
if (on) {
fh->ov.tvnorm = btv->tvnorm;
new = videobuf_sg_alloc(sizeof(*new));
@@ -2805,7 +2753,6 @@
/* switch over */
retval = bttv_switch_overlay(btv, fh, new);
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
@@ -2844,7 +2791,6 @@
}
/* ok, accept it */
- mutex_lock(&fh->cap.vb_lock);
btv->fbuf.base = fb->base;
btv->fbuf.fmt.width = fb->fmt.width;
btv->fbuf.fmt.height = fb->fmt.height;
@@ -2876,7 +2822,6 @@
retval = bttv_switch_overlay(btv, fh, new);
}
}
- mutex_unlock(&fh->cap.vb_lock);
return retval;
}
@@ -2955,7 +2900,6 @@
c->id >= V4L2_CID_PRIVATE_LASTP1))
return -EINVAL;
- mutex_lock(&btv->lock);
if (!btv->volume_gpio && (c->id == V4L2_CID_AUDIO_VOLUME))
*c = no_ctl;
else {
@@ -2963,7 +2907,6 @@
*c = (NULL != ctrl) ? *ctrl : no_ctl;
}
- mutex_unlock(&btv->lock);
return 0;
}
@@ -2974,10 +2917,8 @@
struct bttv_fh *fh = f;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id,
&parm->parm.capture.timeperframe);
- mutex_unlock(&btv->lock);
return 0;
}
@@ -2993,7 +2934,6 @@
if (0 != t->index)
return -EINVAL;
- mutex_lock(&btv->lock);
t->rxsubchans = V4L2_TUNER_SUB_MONO;
bttv_call_all(btv, tuner, g_tuner, t);
strcpy(t->name, "Television");
@@ -3005,7 +2945,6 @@
if (btv->audio_mode_gpio)
btv->audio_mode_gpio(btv, t, 0);
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3014,9 +2953,7 @@
struct bttv_fh *fh = f;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
*p = v4l2_prio_max(&btv->prio);
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3028,9 +2965,7 @@
struct bttv *btv = fh->btv;
int rc;
- mutex_lock(&btv->lock);
rc = v4l2_prio_change(&btv->prio, &fh->prio, prio);
- mutex_unlock(&btv->lock);
return rc;
}
@@ -3045,9 +2980,7 @@
cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
return -EINVAL;
- mutex_lock(&btv->lock);
*cap = bttv_tvnorms[btv->tvnorm].cropcap;
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3065,9 +2998,7 @@
inconsistent with fh->width or fh->height and apps
do not expect a change here. */
- mutex_lock(&btv->lock);
crop->c = btv->crop[!!fh->do_crop].rect;
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3091,17 +3022,14 @@
/* Make sure tvnorm, vbi_end and the current cropping
parameters remain consistent until we're done. Note
read() may change vbi_end in check_alloc_btres_lock(). */
- mutex_lock(&btv->lock);
retval = v4l2_prio_check(&btv->prio, fh->prio);
if (0 != retval) {
- mutex_unlock(&btv->lock);
return retval;
}
retval = -EBUSY;
if (locked_btres(fh->btv, VIDEO_RESOURCES)) {
- mutex_unlock(&btv->lock);
return retval;
}
@@ -3113,7 +3041,6 @@
b_top = max(b->top, btv->vbi_end);
if (b_top + 32 >= b_bottom) {
- mutex_unlock(&btv->lock);
return retval;
}
@@ -3136,12 +3063,8 @@
btv->crop[1] = c;
- mutex_unlock(&btv->lock);
-
fh->do_crop = 1;
- mutex_lock(&fh->cap.vb_lock);
-
if (fh->width < c.min_scaled_width) {
fh->width = c.min_scaled_width;
btv->init.width = c.min_scaled_width;
@@ -3158,8 +3081,6 @@
btv->init.height = c.max_scaled_height;
}
- mutex_unlock(&fh->cap.vb_lock);
-
return 0;
}
@@ -3227,7 +3148,6 @@
return videobuf_poll_stream(file, &fh->vbi, wait);
}
- mutex_lock(&fh->cap.vb_lock);
if (check_btres(fh,RESOURCE_VIDEO_STREAM)) {
/* streaming capture */
if (list_empty(&fh->cap.stream))
@@ -3262,7 +3182,6 @@
else
rc = 0;
err:
- mutex_unlock(&fh->cap.vb_lock);
return rc;
}
@@ -3293,23 +3212,11 @@
return -ENOMEM;
file->private_data = fh;
- /*
- * btv is protected by btv->lock mutex, while btv->init and other
- * streaming vars are protected by fh->cap.vb_lock. We need to take
- * care of both locks to avoid troubles. However, vb_lock is used also
- * inside videobuf, without calling buf->lock. So, it is a very bad
- * idea to hold both locks at the same time.
- * Let's first copy btv->init at fh, holding cap.vb_lock, and then work
- * with the rest of init, holding btv->lock.
- */
- mutex_lock(&fh->cap.vb_lock);
*fh = btv->init;
- mutex_unlock(&fh->cap.vb_lock);
fh->type = type;
fh->ov.setup_ok = 0;
- mutex_lock(&btv->lock);
v4l2_prio_open(&btv->prio, &fh->prio);
videobuf_queue_sg_init(&fh->cap, &bttv_video_qops,
@@ -3317,13 +3224,13 @@
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct bttv_buffer),
- fh, NULL);
+ fh, &btv->lock);
videobuf_queue_sg_init(&fh->vbi, &bttv_vbi_qops,
&btv->c.pci->dev, &btv->s_lock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB,
sizeof(struct bttv_buffer),
- fh, NULL);
+ fh, &btv->lock);
set_tvnorm(btv,btv->tvnorm);
set_input(btv, btv->input, btv->tvnorm);
@@ -3346,7 +3253,6 @@
bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm);
bttv_field_count(btv);
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3355,7 +3261,6 @@
struct bttv_fh *fh = file->private_data;
struct bttv *btv = fh->btv;
- mutex_lock(&btv->lock);
/* turn off overlay */
if (check_btres(fh, RESOURCE_OVERLAY))
bttv_switch_overlay(btv,fh,NULL);
@@ -3381,14 +3286,8 @@
/* free stuff */
- /*
- * videobuf uses cap.vb_lock - we should avoid holding btv->lock,
- * otherwise we may have dead lock conditions
- */
- mutex_unlock(&btv->lock);
videobuf_mmap_free(&fh->cap);
videobuf_mmap_free(&fh->vbi);
- mutex_lock(&btv->lock);
v4l2_prio_close(&btv->prio, fh->prio);
file->private_data = NULL;
kfree(fh);
@@ -3398,7 +3297,6 @@
if (!btv->users)
audio_mute(btv, 1);
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3502,11 +3400,8 @@
if (unlikely(!fh))
return -ENOMEM;
file->private_data = fh;
- mutex_lock(&fh->cap.vb_lock);
*fh = btv->init;
- mutex_unlock(&fh->cap.vb_lock);
- mutex_lock(&btv->lock);
v4l2_prio_open(&btv->prio, &fh->prio);
btv->radio_user++;
@@ -3514,7 +3409,6 @@
bttv_call_all(btv, tuner, s_radio);
audio_input(btv,TVAUDIO_INPUT_RADIO);
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3524,7 +3418,6 @@
struct bttv *btv = fh->btv;
struct rds_command cmd;
- mutex_lock(&btv->lock);
v4l2_prio_close(&btv->prio, fh->prio);
file->private_data = NULL;
kfree(fh);
@@ -3532,7 +3425,6 @@
btv->radio_user--;
bttv_call_all(btv, core, ioctl, RDS_CMD_CLOSE, &cmd);
- mutex_unlock(&btv->lock);
return 0;
}
@@ -3561,7 +3453,6 @@
return -EINVAL;
if (0 != t->index)
return -EINVAL;
- mutex_lock(&btv->lock);
strcpy(t->name, "Radio");
t->type = V4L2_TUNER_RADIO;
@@ -3570,8 +3461,6 @@
if (btv->audio_mode_gpio)
btv->audio_mode_gpio(btv, t, 0);
- mutex_unlock(&btv->lock);
-
return 0;
}
@@ -3692,7 +3581,7 @@
.open = radio_open,
.read = radio_read,
.release = radio_release,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = radio_poll,
};
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 935e0c9..c119350 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -860,7 +860,7 @@
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 6e4b196..24fc009 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -718,7 +718,7 @@
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 260c666..0dfff50 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1775,7 +1775,7 @@
.read = cafe_v4l_read,
.poll = cafe_v4l_poll,
.mmap = cafe_v4l_mmap,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.c b/drivers/media/video/cx18/cx18-alsa-pcm.c
index 8f55692..82d195b 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.c
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.c
@@ -218,7 +218,13 @@
static int snd_cx18_pcm_ioctl(struct snd_pcm_substream *substream,
unsigned int cmd, void *arg)
{
- return snd_pcm_lib_ioctl(substream, cmd, arg);
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+ int ret;
+
+ snd_cx18_lock(cxsc);
+ ret = snd_pcm_lib_ioctl(substream, cmd, arg);
+ snd_cx18_unlock(cxsc);
+ return ret;
}
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 9045f1e..ab461e2 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -41,7 +41,7 @@
.read = cx18_v4l2_read,
.open = cx18_v4l2_open,
/* FIXME change to video_ioctl2 if serialization lock can be removed */
- .ioctl = cx18_v4l2_ioctl,
+ .unlocked_ioctl = cx18_v4l2_ioctl,
.release = cx18_v4l2_close,
.poll = cx18_v4l2_enc_poll,
};
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index a5cfc76..bb16409 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -2530,7 +2530,7 @@
.owner = THIS_MODULE,
.open = et61x251_open,
.release = et61x251_release,
- .ioctl = et61x251_ioctl,
+ .unlocked_ioctl = et61x251_ioctl,
.read = et61x251_read,
.poll = et61x251_poll,
.mmap = et61x251_mmap,
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 330dadc..e23de57 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -63,7 +63,10 @@
#define QUALITY_DEF 80
u8 jpegqual; /* webcam quality */
+ u8 reg01;
+ u8 reg17;
u8 reg18;
+ u8 flags;
s8 ag_cnt;
#define AG_CNT_START 13
@@ -96,6 +99,22 @@
SENSOR_SP80708,
};
+/* device flags */
+#define PDN_INV 1 /* inverse pin S_PWR_DN / sn_xxx tables */
+
+/* sn9c1xx definitions */
+/* register 0x01 */
+#define S_PWR_DN 0x01 /* sensor power down */
+#define S_PDN_INV 0x02 /* inverse pin S_PWR_DN */
+#define V_TX_EN 0x04 /* video transfer enable */
+#define LED 0x08 /* output to pin LED */
+#define SCL_SEL_OD 0x20 /* open-drain mode */
+#define SYS_SEL_48M 0x40 /* system clock 0: 24MHz, 1: 48MHz */
+/* register 0x17 */
+#define MCK_SIZE_MASK 0x1f /* sensor master clock */
+#define SEN_CLK_EN 0x20 /* enable sensor clock */
+#define DEF_EN 0x80 /* defect pixel by 0: soft, 1: hard */
+
/* V4L2 controls supported by the driver */
static void setbrightness(struct gspca_dev *gspca_dev);
static void setcontrast(struct gspca_dev *gspca_dev);
@@ -1755,141 +1774,6 @@
}
}
-static void bridge_init(struct gspca_dev *gspca_dev,
- const u8 *sn9c1xx)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- u8 reg0102[2];
- const u8 *reg9a;
- static const u8 reg9a_def[] =
- {0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
- static const u8 reg9a_spec[] =
- {0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
- static const u8 regd4[] = {0x60, 0x00, 0x00};
-
- /* sensor clock already enabled in sd_init */
- /* reg_w1(gspca_dev, 0xf1, 0x00); */
- reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
-
- /* configure gpio */
- reg0102[0] = sn9c1xx[1];
- reg0102[1] = sn9c1xx[2];
- if (gspca_dev->audio)
- reg0102[1] |= 0x04; /* keep the audio connection */
- reg_w(gspca_dev, 0x01, reg0102, 2);
- reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
- reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
- switch (sd->sensor) {
- case SENSOR_GC0307:
- case SENSOR_OV7660:
- case SENSOR_PO1030:
- case SENSOR_PO2030N:
- case SENSOR_SOI768:
- case SENSOR_SP80708:
- reg9a = reg9a_spec;
- break;
- default:
- reg9a = reg9a_def;
- break;
- }
- reg_w(gspca_dev, 0x9a, reg9a, 6);
-
- reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
-
- reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
-
- switch (sd->sensor) {
- case SENSOR_ADCM1700:
- reg_w1(gspca_dev, 0x01, 0x43);
- reg_w1(gspca_dev, 0x17, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_GC0307:
- msleep(50);
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x22);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- msleep(50);
- break;
- case SENSOR_MI0360B:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x60);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_MT9V111:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x61);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_OM6802:
- msleep(10);
- reg_w1(gspca_dev, 0x02, 0x73);
- reg_w1(gspca_dev, 0x17, 0x60);
- reg_w1(gspca_dev, 0x01, 0x22);
- msleep(100);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x17, 0x64);
- reg_w1(gspca_dev, 0x17, 0x64);
- reg_w1(gspca_dev, 0x01, 0x42);
- msleep(10);
- reg_w1(gspca_dev, 0x01, 0x42);
- i2c_w8(gspca_dev, om6802_init0[0]);
- i2c_w8(gspca_dev, om6802_init0[1]);
- msleep(15);
- reg_w1(gspca_dev, 0x02, 0x71);
- msleep(150);
- break;
- case SENSOR_OV7630:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0xe2);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_OV7648:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_PO1030:
- case SENSOR_SOI768:
- reg_w1(gspca_dev, 0x01, 0x61);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x60);
- reg_w1(gspca_dev, 0x01, 0x40);
- break;
- case SENSOR_PO2030N:
- case SENSOR_OV7660:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- break;
- case SENSOR_SP80708:
- reg_w1(gspca_dev, 0x01, 0x63);
- reg_w1(gspca_dev, 0x17, 0x20);
- reg_w1(gspca_dev, 0x01, 0x62);
- reg_w1(gspca_dev, 0x01, 0x42);
- msleep(100);
- reg_w1(gspca_dev, 0x02, 0x62);
- break;
- default:
-/* case SENSOR_HV7131R: */
-/* case SENSOR_MI0360: */
-/* case SENSOR_MO4000: */
- reg_w1(gspca_dev, 0x01, 0x43);
- reg_w1(gspca_dev, 0x17, 0x61);
- reg_w1(gspca_dev, 0x01, 0x42);
- if (sd->sensor == SENSOR_HV7131R)
- hv7131r_probe(gspca_dev);
- break;
- }
-}
-
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
@@ -1898,7 +1782,8 @@
struct cam *cam;
sd->bridge = id->driver_info >> 16;
- sd->sensor = id->driver_info;
+ sd->sensor = id->driver_info >> 8;
+ sd->flags = id->driver_info;
cam = &gspca_dev->cam;
if (sd->sensor == SENSOR_ADCM1700) {
@@ -1929,7 +1814,7 @@
/* setup a selector by bridge */
reg_w1(gspca_dev, 0xf1, 0x01);
reg_r(gspca_dev, 0x00, 1);
- reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]);
+ reg_w1(gspca_dev, 0xf1, 0x00);
reg_r(gspca_dev, 0x00, 1); /* get sonix chip id */
regF1 = gspca_dev->usb_buf[0];
if (gspca_dev->usb_err < 0)
@@ -2423,10 +2308,17 @@
{
struct sd *sd = (struct sd *) gspca_dev;
int i;
- u8 reg1, reg17;
+ u8 reg01, reg17;
+ u8 reg0102[2];
const u8 *sn9c1xx;
const u8 (*init)[8];
+ const u8 *reg9a;
int mode;
+ static const u8 reg9a_def[] =
+ {0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
+ static const u8 reg9a_spec[] =
+ {0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
+ static const u8 regd4[] = {0x60, 0x00, 0x00};
static const u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
static const u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
static const u8 CA_adcm1700[] =
@@ -2448,7 +2340,85 @@
/* initialize the bridge */
sn9c1xx = sn_tb[sd->sensor];
- bridge_init(gspca_dev, sn9c1xx);
+
+ /* sensor clock already enabled in sd_init */
+ /* reg_w1(gspca_dev, 0xf1, 0x00); */
+ reg01 = sn9c1xx[1];
+ if (sd->flags & PDN_INV)
+ reg01 ^= S_PDN_INV; /* power down inverted */
+ reg_w1(gspca_dev, 0x01, reg01);
+
+ /* configure gpio */
+ reg0102[0] = reg01;
+ reg0102[1] = sn9c1xx[2];
+ if (gspca_dev->audio)
+ reg0102[1] |= 0x04; /* keep the audio connection */
+ reg_w(gspca_dev, 0x01, reg0102, 2);
+ reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
+ reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
+ switch (sd->sensor) {
+ case SENSOR_GC0307:
+ case SENSOR_OV7660:
+ case SENSOR_PO1030:
+ case SENSOR_PO2030N:
+ case SENSOR_SOI768:
+ case SENSOR_SP80708:
+ reg9a = reg9a_spec;
+ break;
+ default:
+ reg9a = reg9a_def;
+ break;
+ }
+ reg_w(gspca_dev, 0x9a, reg9a, 6);
+
+ reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
+
+ reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
+
+ reg17 = sn9c1xx[0x17];
+ switch (sd->sensor) {
+ case SENSOR_GC0307:
+ msleep(50); /*fixme: is it useful? */
+ break;
+ case SENSOR_OM6802:
+ msleep(10);
+ reg_w1(gspca_dev, 0x02, 0x73);
+ reg17 |= SEN_CLK_EN;
+ reg_w1(gspca_dev, 0x17, reg17);
+ reg_w1(gspca_dev, 0x01, 0x22);
+ msleep(100);
+ reg01 = SCL_SEL_OD | S_PDN_INV;
+ reg17 &= MCK_SIZE_MASK;
+ reg17 |= 0x04; /* clock / 4 */
+ break;
+ }
+ reg01 |= SYS_SEL_48M;
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg17 |= SEN_CLK_EN;
+ reg_w1(gspca_dev, 0x17, reg17);
+ reg01 &= ~S_PWR_DN; /* sensor power on */
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 &= ~SYS_SEL_48M;
+ reg_w1(gspca_dev, 0x01, reg01);
+
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ hv7131r_probe(gspca_dev); /*fixme: is it useful? */
+ break;
+ case SENSOR_OM6802:
+ msleep(10);
+ reg_w1(gspca_dev, 0x01, reg01);
+ i2c_w8(gspca_dev, om6802_init0[0]);
+ i2c_w8(gspca_dev, om6802_init0[1]);
+ msleep(15);
+ reg_w1(gspca_dev, 0x02, 0x71);
+ msleep(150);
+ break;
+ case SENSOR_SP80708:
+ msleep(100);
+ reg_w1(gspca_dev, 0x02, 0x62);
+ break;
+ }
/* initialize the sensor */
i2c_w_seq(gspca_dev, sensor_init[sd->sensor]);
@@ -2476,30 +2446,11 @@
}
reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
switch (sd->sensor) {
- case SENSOR_GC0307:
- reg17 = 0xa2;
- break;
- case SENSOR_MT9V111:
- case SENSOR_MI0360B:
- reg17 = 0xe0;
- break;
- case SENSOR_ADCM1700:
- case SENSOR_OV7630:
- reg17 = 0xe2;
- break;
- case SENSOR_OV7648:
- reg17 = 0x20;
- break;
- case SENSOR_OV7660:
- case SENSOR_SOI768:
- reg17 = 0xa0;
- break;
- case SENSOR_PO1030:
- case SENSOR_PO2030N:
- reg17 = 0xa0;
+ case SENSOR_OM6802:
+/* case SENSOR_OV7648: * fixme: sometimes */
break;
default:
- reg17 = 0x60;
+ reg17 |= DEF_EN;
break;
}
reg_w1(gspca_dev, 0x17, reg17);
@@ -2546,95 +2497,67 @@
init = NULL;
mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
- if (mode)
- reg1 = 0x46; /* 320x240: clk 48Mhz, video trf enable */
- else
- reg1 = 0x06; /* 640x480: clk 24Mhz, video trf enable */
- reg17 = 0x61; /* 0x:20: enable sensor clock */
+ reg01 |= SYS_SEL_48M | V_TX_EN;
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x02; /* clock / 2 */
switch (sd->sensor) {
case SENSOR_ADCM1700:
init = adcm1700_sensor_param1;
- reg1 = 0x46;
- reg17 = 0xe2;
break;
case SENSOR_GC0307:
init = gc0307_sensor_param1;
- reg17 = 0xa2;
- reg1 = 0x44;
+ break;
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ if (mode)
+ reg01 |= SYS_SEL_48M; /* 320x240: clk 48Mhz */
+ else
+ reg01 &= ~SYS_SEL_48M; /* 640x480: clk 24Mhz */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 1 */
break;
case SENSOR_MI0360B:
init = mi0360b_sensor_param1;
- reg1 &= ~0x02; /* don't inverse pin S_PWR_DN */
- reg17 = 0xe2;
break;
case SENSOR_MO4000:
- if (mode) {
-/* reg1 = 0x46; * 320 clk 48Mhz 60fp/s */
- reg1 = 0x06; /* clk 24Mz */
- } else {
- reg17 = 0x22; /* 640 MCKSIZE */
-/* reg1 = 0x06; * 640 clk 24Mz (done) */
+ if (mode) { /* if 320x240 */
+ reg01 &= ~SYS_SEL_48M; /* clk 24Mz */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 1 */
}
break;
case SENSOR_MT9V111:
init = mt9v111_sensor_param1;
- if (mode) {
- reg1 = 0x04; /* 320 clk 48Mhz */
- } else {
-/* reg1 = 0x06; * 640 clk 24Mz (done) */
- reg17 = 0xc2;
- }
break;
case SENSOR_OM6802:
init = om6802_sensor_param1;
- reg17 = 0x64; /* 640 MCKSIZE */
+ if (!mode) { /* if 640x480 */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 4 */
+ }
break;
case SENSOR_OV7630:
init = ov7630_sensor_param1;
- reg17 = 0xe2;
- reg1 = 0x44;
break;
case SENSOR_OV7648:
init = ov7648_sensor_param1;
- reg17 = 0x21;
-/* reg1 = 0x42; * 42 - 46? */
+ reg17 &= ~MCK_SIZE_MASK;
+ reg17 |= 0x01; /* clock / 1 */
break;
case SENSOR_OV7660:
init = ov7660_sensor_param1;
- if (sd->bridge == BRIDGE_SN9C120) {
- if (mode) { /* 320x240 - 160x120 */
- reg17 = 0xa2;
- reg1 = 0x44; /* 48 Mhz, video trf eneble */
- }
- } else {
- reg17 = 0x22;
- reg1 = 0x06; /* 24 Mhz, video trf eneble
- * inverse power down */
- }
break;
case SENSOR_PO1030:
init = po1030_sensor_param1;
- reg17 = 0xa2;
- reg1 = 0x44;
break;
case SENSOR_PO2030N:
init = po2030n_sensor_param1;
- reg1 = 0x46;
- reg17 = 0xa2;
break;
case SENSOR_SOI768:
init = soi768_sensor_param1;
- reg1 = 0x44;
- reg17 = 0xa2;
break;
case SENSOR_SP80708:
init = sp80708_sensor_param1;
- if (mode) {
-/*?? reg1 = 0x04; * 320 clk 48Mhz */
- } else {
- reg1 = 0x46; /* 640 clk 48Mz */
- reg17 = 0xa2;
- }
break;
}
@@ -2684,7 +2607,9 @@
setjpegqual(gspca_dev);
reg_w1(gspca_dev, 0x17, reg17);
- reg_w1(gspca_dev, 0x01, reg1);
+ reg_w1(gspca_dev, 0x01, reg01);
+ sd->reg01 = reg01;
+ sd->reg17 = reg17;
sethvflip(gspca_dev);
setbrightness(gspca_dev);
@@ -2706,41 +2631,64 @@
{ 0xa1, 0x21, 0x76, 0x20, 0x00, 0x00, 0x00, 0x10 };
static const u8 stopsoi768[] =
{ 0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10 };
- u8 data;
- const u8 *sn9c1xx;
+ u8 reg01;
+ u8 reg17;
- data = 0x0b;
+ reg01 = sd->reg01;
+ reg17 = sd->reg17 & ~SEN_CLK_EN;
switch (sd->sensor) {
+ case SENSOR_ADCM1700:
case SENSOR_GC0307:
- data = 0x29;
+ case SENSOR_PO2030N:
+ case SENSOR_SP80708:
+ reg01 |= LED;
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 &= ~(LED | V_TX_EN);
+ reg_w1(gspca_dev, 0x01, reg01);
+/* reg_w1(gspca_dev, 0x02, 0x??); * LED off ? */
break;
case SENSOR_HV7131R:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
i2c_w8(gspca_dev, stophv7131);
- data = 0x2b;
break;
case SENSOR_MI0360:
case SENSOR_MI0360B:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
+/* reg_w1(gspca_dev, 0x02, 0x40); * LED off ? */
i2c_w8(gspca_dev, stopmi0360);
- data = 0x29;
break;
- case SENSOR_OV7648:
- i2c_w8(gspca_dev, stopov7648);
- /* fall thru */
case SENSOR_MT9V111:
- case SENSOR_OV7630:
+ case SENSOR_OM6802:
case SENSOR_PO1030:
- data = 0x29;
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
+ break;
+ case SENSOR_OV7630:
+ case SENSOR_OV7648:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
+ i2c_w8(gspca_dev, stopov7648);
+ break;
+ case SENSOR_OV7660:
+ reg01 &= ~V_TX_EN;
+ reg_w1(gspca_dev, 0x01, reg01);
break;
case SENSOR_SOI768:
i2c_w8(gspca_dev, stopsoi768);
- data = 0x29;
break;
}
- sn9c1xx = sn_tb[sd->sensor];
- reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
- reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
- reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
- reg_w1(gspca_dev, 0x01, data);
+
+ reg01 |= SCL_SEL_OD;
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 |= S_PWR_DN; /* sensor power down */
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg_w1(gspca_dev, 0x17, reg17);
+ reg01 &= ~SYS_SEL_48M; /* clock 24MHz */
+ reg_w1(gspca_dev, 0x01, reg01);
+ reg01 |= LED;
+ reg_w1(gspca_dev, 0x01, reg01);
/* Don't disable sensor clock as that disables the button on the cam */
/* reg_w1(gspca_dev, 0xf1, 0x01); */
}
@@ -2954,14 +2902,18 @@
/* -- module initialisation -- */
#define BS(bridge, sensor) \
.driver_info = (BRIDGE_ ## bridge << 16) \
- | SENSOR_ ## sensor
+ | (SENSOR_ ## sensor << 8)
+#define BSF(bridge, sensor, flags) \
+ .driver_info = (BRIDGE_ ## bridge << 16) \
+ | (SENSOR_ ## sensor << 8) \
+ | (flags)
static const __devinitdata struct usb_device_id device_table[] = {
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
#endif
- {USB_DEVICE(0x045e, 0x00f5), BS(SN9C105, OV7660)},
- {USB_DEVICE(0x045e, 0x00f7), BS(SN9C105, OV7660)},
+ {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)},
+ {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, PDN_INV)},
{USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)},
{USB_DEVICE(0x0471, 0x0328), BS(SN9C105, MI0360)},
{USB_DEVICE(0x0471, 0x0330), BS(SN9C105, MI0360)},
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 2be23bc..48d2c24 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1659,7 +1659,7 @@
.open = meye_open,
.release = meye_release,
.mmap = meye_mmap,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = meye_poll,
};
@@ -1831,12 +1831,6 @@
msleep(1);
mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK);
- if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
- video_nr) < 0) {
- v4l2_err(v4l2_dev, "video_register_device failed\n");
- goto outvideoreg;
- }
-
mutex_init(&meye.lock);
init_waitqueue_head(&meye.proc_list);
meye.brightness = 32 << 10;
@@ -1858,6 +1852,12 @@
sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0);
sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48);
+ if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
+ video_nr) < 0) {
+ v4l2_err(v4l2_dev, "video_register_device failed\n");
+ goto outvideoreg;
+ }
+
v4l2_info(v4l2_dev, "Motion Eye Camera Driver v%s.\n",
MEYE_DRIVER_VERSION);
v4l2_info(v4l2_dev, "mchip KL5A72002 rev. %d, base %lx, irq %d\n",
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 7129b50..7551907 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -932,7 +932,7 @@
static const struct v4l2_file_operations pms_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = pms_read,
};
diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c
index 4e5a8cf..07cf0c6 100644
--- a/drivers/media/video/sh_vou.c
+++ b/drivers/media/video/sh_vou.c
@@ -75,6 +75,7 @@
int pix_idx;
struct videobuf_buffer *active;
enum sh_vou_status status;
+ struct mutex fop_lock;
};
struct sh_vou_file {
@@ -235,7 +236,7 @@
vb->state = VIDEOBUF_NEEDS_INIT;
}
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
static int sh_vou_buf_setup(struct videobuf_queue *vq, unsigned int *count,
unsigned int *size)
{
@@ -257,7 +258,7 @@
return 0;
}
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
static int sh_vou_buf_prepare(struct videobuf_queue *vq,
struct videobuf_buffer *vb,
enum v4l2_field field)
@@ -306,7 +307,7 @@
return 0;
}
-/* Locking: caller holds vq->vb_lock mutex and vq->irqlock spinlock */
+/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
static void sh_vou_buf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
@@ -1190,7 +1191,7 @@
V4L2_BUF_TYPE_VIDEO_OUTPUT,
V4L2_FIELD_NONE,
sizeof(struct videobuf_buffer), vdev,
- NULL);
+ &vou_dev->fop_lock);
return 0;
}
@@ -1292,7 +1293,7 @@
.owner = THIS_MODULE,
.open = sh_vou_open,
.release = sh_vou_release,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.mmap = sh_vou_mmap,
.poll = sh_vou_poll,
};
@@ -1331,6 +1332,7 @@
INIT_LIST_HEAD(&vou_dev->queue);
spin_lock_init(&vou_dev->lock);
+ mutex_init(&vou_dev->fop_lock);
atomic_set(&vou_dev->use_count, 0);
vou_dev->pdata = vou_pdata;
vou_dev->status = SH_VOU_IDLE;
@@ -1388,6 +1390,7 @@
vdev->tvnorms |= V4L2_STD_PAL;
vdev->v4l2_dev = &vou_dev->v4l2_dev;
vdev->release = video_device_release;
+ vdev->lock = &vou_dev->fop_lock;
vou_dev->vdev = vdev;
video_set_drvdata(vdev, vou_dev);
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 28e19da..f49fbfb 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -3238,7 +3238,7 @@
.owner = THIS_MODULE,
.open = sn9c102_open,
.release = sn9c102_release,
- .ioctl = sn9c102_ioctl,
+ .unlocked_ioctl = sn9c102_ioctl,
.read = sn9c102_read,
.poll = sn9c102_poll,
.mmap = sn9c102_mmap,
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index f169f77..59f8a9a 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -785,7 +785,7 @@
}
}
-struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
+static struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
__u32 v4l2_id, struct uvc_control_mapping **mapping)
{
struct uvc_control *ctrl = NULL;
@@ -944,6 +944,52 @@
return ret;
}
+/*
+ * Mapping V4L2 controls to UVC controls can be straighforward if done well.
+ * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
+ * must be grouped (for instance the Red Balance, Blue Balance and Do White
+ * Balance V4L2 controls use the White Balance Component UVC control) or
+ * otherwise translated. The approach we take here is to use a translation
+ * table for the controls that can be mapped directly, and handle the others
+ * manually.
+ */
+int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+ struct v4l2_querymenu *query_menu)
+{
+ struct uvc_menu_info *menu_info;
+ struct uvc_control_mapping *mapping;
+ struct uvc_control *ctrl;
+ u32 index = query_menu->index;
+ u32 id = query_menu->id;
+ int ret;
+
+ memset(query_menu, 0, sizeof(*query_menu));
+ query_menu->id = id;
+ query_menu->index = index;
+
+ ret = mutex_lock_interruptible(&chain->ctrl_mutex);
+ if (ret < 0)
+ return -ERESTARTSYS;
+
+ ctrl = uvc_find_control(chain, query_menu->id, &mapping);
+ if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (query_menu->index >= mapping->menu_count) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ menu_info = &mapping->menu_info[query_menu->index];
+ strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
+
+done:
+ mutex_unlock(&chain->ctrl_mutex);
+ return ret;
+}
+
/* --------------------------------------------------------------------------
* Control transactions
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index ed6d544..f14581b 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -90,6 +90,39 @@
}
/*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int __uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ unsigned int i;
+
+ for (i = 0; i < queue->count; ++i) {
+ if (queue->buffer[i].vma_use_count != 0)
+ return -EBUSY;
+ }
+
+ if (queue->count) {
+ vfree(queue->mem);
+ queue->count = 0;
+ }
+
+ return 0;
+}
+
+int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ int ret;
+
+ mutex_lock(&queue->mutex);
+ ret = __uvc_free_buffers(queue);
+ mutex_unlock(&queue->mutex);
+
+ return ret;
+}
+
+/*
* Allocate the video buffers.
*
* Pages are reserved to make sure they will not be swapped, as they will be
@@ -110,7 +143,7 @@
mutex_lock(&queue->mutex);
- if ((ret = uvc_free_buffers(queue)) < 0)
+ if ((ret = __uvc_free_buffers(queue)) < 0)
goto done;
/* Bail out if no buffers should be allocated. */
@@ -152,28 +185,6 @@
}
/*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
- */
-int uvc_free_buffers(struct uvc_video_queue *queue)
-{
- unsigned int i;
-
- for (i = 0; i < queue->count; ++i) {
- if (queue->buffer[i].vma_use_count != 0)
- return -EBUSY;
- }
-
- if (queue->count) {
- vfree(queue->mem);
- queue->count = 0;
- }
-
- return 0;
-}
-
-/*
* Check if buffers have been allocated.
*/
int uvc_queue_allocated(struct uvc_video_queue *queue)
@@ -369,6 +380,82 @@
}
/*
+ * VMA operations.
+ */
+static void uvc_vm_open(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count++;
+}
+
+static void uvc_vm_close(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count--;
+}
+
+static const struct vm_operations_struct uvc_vm_ops = {
+ .open = uvc_vm_open,
+ .close = uvc_vm_close,
+};
+
+/*
+ * Memory-map a video buffer.
+ *
+ * This function implements video buffers memory mapping and is intended to be
+ * used by the device mmap handler.
+ */
+int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+{
+ struct uvc_buffer *uninitialized_var(buffer);
+ struct page *page;
+ unsigned long addr, start, size;
+ unsigned int i;
+ int ret = 0;
+
+ start = vma->vm_start;
+ size = vma->vm_end - vma->vm_start;
+
+ mutex_lock(&queue->mutex);
+
+ for (i = 0; i < queue->count; ++i) {
+ buffer = &queue->buffer[i];
+ if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+
+ if (i == queue->count || size != queue->buf_size) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * VM_IO marks the area as being an mmaped region for I/O to a
+ * device. It also prevents the region from being core dumped.
+ */
+ vma->vm_flags |= VM_IO;
+
+ addr = (unsigned long)queue->mem + buffer->buf.m.offset;
+ while (size > 0) {
+ page = vmalloc_to_page((void *)addr);
+ if ((ret = vm_insert_page(vma, start, page)) < 0)
+ goto done;
+
+ start += PAGE_SIZE;
+ addr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vma->vm_ops = &uvc_vm_ops;
+ vma->vm_private_data = buffer;
+ uvc_vm_open(vma);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
+/*
* Poll the video queue.
*
* This function implements video queue polling and is intended to be used by
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 6d15de9..8cf61e8 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -101,40 +101,6 @@
*/
/*
- * Mapping V4L2 controls to UVC controls can be straighforward if done well.
- * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
- * must be grouped (for instance the Red Balance, Blue Balance and Do White
- * Balance V4L2 controls use the White Balance Component UVC control) or
- * otherwise translated. The approach we take here is to use a translation
- * table for the controls that can be mapped directly, and handle the others
- * manually.
- */
-static int uvc_v4l2_query_menu(struct uvc_video_chain *chain,
- struct v4l2_querymenu *query_menu)
-{
- struct uvc_menu_info *menu_info;
- struct uvc_control_mapping *mapping;
- struct uvc_control *ctrl;
- u32 index = query_menu->index;
- u32 id = query_menu->id;
-
- ctrl = uvc_find_control(chain, query_menu->id, &mapping);
- if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU)
- return -EINVAL;
-
- if (query_menu->index >= mapping->menu_count)
- return -EINVAL;
-
- memset(query_menu, 0, sizeof(*query_menu));
- query_menu->id = id;
- query_menu->index = index;
-
- menu_info = &mapping->menu_info[query_menu->index];
- strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
- return 0;
-}
-
-/*
* Find the frame interval closest to the requested frame interval for the
* given frame format and size. This should be done by the device as part of
* the Video Probe and Commit negotiation, but some hardware don't implement
@@ -260,12 +226,14 @@
* developers test their webcams with the Linux driver as well as with
* the Windows driver).
*/
+ mutex_lock(&stream->mutex);
if (stream->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS)
probe->dwMaxVideoFrameSize =
stream->ctrl.dwMaxVideoFrameSize;
/* Probe the device. */
ret = uvc_probe_video(stream, probe);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
goto done;
@@ -289,14 +257,21 @@
static int uvc_v4l2_get_format(struct uvc_streaming *stream,
struct v4l2_format *fmt)
{
- struct uvc_format *format = stream->cur_format;
- struct uvc_frame *frame = stream->cur_frame;
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+ int ret = 0;
if (fmt->type != stream->type)
return -EINVAL;
- if (format == NULL || frame == NULL)
- return -EINVAL;
+ mutex_lock(&stream->mutex);
+ format = stream->cur_format;
+ frame = stream->cur_frame;
+
+ if (format == NULL || frame == NULL) {
+ ret = -EINVAL;
+ goto done;
+ }
fmt->fmt.pix.pixelformat = format->fcc;
fmt->fmt.pix.width = frame->wWidth;
@@ -307,7 +282,9 @@
fmt->fmt.pix.colorspace = format->colorspace;
fmt->fmt.pix.priv = 0;
- return 0;
+done:
+ mutex_unlock(&stream->mutex);
+ return ret;
}
static int uvc_v4l2_set_format(struct uvc_streaming *stream,
@@ -321,18 +298,24 @@
if (fmt->type != stream->type)
return -EINVAL;
- if (uvc_queue_allocated(&stream->queue))
- return -EBUSY;
-
ret = uvc_v4l2_try_format(stream, fmt, &probe, &format, &frame);
if (ret < 0)
return ret;
+ mutex_lock(&stream->mutex);
+
+ if (uvc_queue_allocated(&stream->queue)) {
+ ret = -EBUSY;
+ goto done;
+ }
+
memcpy(&stream->ctrl, &probe, sizeof probe);
stream->cur_format = format;
stream->cur_frame = frame;
- return 0;
+done:
+ mutex_unlock(&stream->mutex);
+ return ret;
}
static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream,
@@ -343,7 +326,10 @@
if (parm->type != stream->type)
return -EINVAL;
+ mutex_lock(&stream->mutex);
numerator = stream->ctrl.dwFrameInterval;
+ mutex_unlock(&stream->mutex);
+
denominator = 10000000;
uvc_simplify_fraction(&numerator, &denominator, 8, 333);
@@ -370,7 +356,6 @@
static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
struct v4l2_streamparm *parm)
{
- struct uvc_frame *frame = stream->cur_frame;
struct uvc_streaming_control probe;
struct v4l2_fract timeperframe;
uint32_t interval;
@@ -379,28 +364,36 @@
if (parm->type != stream->type)
return -EINVAL;
- if (uvc_queue_streaming(&stream->queue))
- return -EBUSY;
-
if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
timeperframe = parm->parm.capture.timeperframe;
else
timeperframe = parm->parm.output.timeperframe;
- memcpy(&probe, &stream->ctrl, sizeof probe);
interval = uvc_fraction_to_interval(timeperframe.numerator,
timeperframe.denominator);
-
uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n",
timeperframe.numerator, timeperframe.denominator, interval);
- probe.dwFrameInterval = uvc_try_frame_interval(frame, interval);
+
+ mutex_lock(&stream->mutex);
+
+ if (uvc_queue_streaming(&stream->queue)) {
+ mutex_unlock(&stream->mutex);
+ return -EBUSY;
+ }
+
+ memcpy(&probe, &stream->ctrl, sizeof probe);
+ probe.dwFrameInterval =
+ uvc_try_frame_interval(stream->cur_frame, interval);
/* Probe the device with the new settings. */
ret = uvc_probe_video(stream, &probe);
- if (ret < 0)
+ if (ret < 0) {
+ mutex_unlock(&stream->mutex);
return ret;
+ }
memcpy(&stream->ctrl, &probe, sizeof probe);
+ mutex_unlock(&stream->mutex);
/* Return the actual frame period. */
timeperframe.numerator = probe.dwFrameInterval;
@@ -528,11 +521,9 @@
if (uvc_has_privileges(handle)) {
uvc_video_enable(stream, 0);
- mutex_lock(&stream->queue.mutex);
if (uvc_free_buffers(&stream->queue) < 0)
uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to "
"free buffers.\n");
- mutex_unlock(&stream->queue.mutex);
}
/* Release the file handle. */
@@ -624,7 +615,7 @@
}
case VIDIOC_QUERYMENU:
- return uvc_v4l2_query_menu(chain, arg);
+ return uvc_query_v4l2_menu(chain, arg);
case VIDIOC_G_EXT_CTRLS:
{
@@ -905,15 +896,17 @@
case VIDIOC_CROPCAP:
{
struct v4l2_cropcap *ccap = arg;
- struct uvc_frame *frame = stream->cur_frame;
if (ccap->type != stream->type)
return -EINVAL;
ccap->bounds.left = 0;
ccap->bounds.top = 0;
- ccap->bounds.width = frame->wWidth;
- ccap->bounds.height = frame->wHeight;
+
+ mutex_lock(&stream->mutex);
+ ccap->bounds.width = stream->cur_frame->wWidth;
+ ccap->bounds.height = stream->cur_frame->wHeight;
+ mutex_unlock(&stream->mutex);
ccap->defrect = ccap->bounds;
@@ -930,8 +923,6 @@
case VIDIOC_REQBUFS:
{
struct v4l2_requestbuffers *rb = arg;
- unsigned int bufsize =
- stream->ctrl.dwMaxVideoFrameSize;
if (rb->type != stream->type ||
rb->memory != V4L2_MEMORY_MMAP)
@@ -940,7 +931,10 @@
if ((ret = uvc_acquire_privileges(handle)) < 0)
return ret;
- ret = uvc_alloc_buffers(&stream->queue, rb->count, bufsize);
+ mutex_lock(&stream->mutex);
+ ret = uvc_alloc_buffers(&stream->queue, rb->count,
+ stream->ctrl.dwMaxVideoFrameSize);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
return ret;
@@ -988,7 +982,9 @@
if (!uvc_has_privileges(handle))
return -EBUSY;
+ mutex_lock(&stream->mutex);
ret = uvc_video_enable(stream, 1);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
return ret;
break;
@@ -1068,79 +1064,14 @@
return -EINVAL;
}
-/*
- * VMA operations.
- */
-static void uvc_vm_open(struct vm_area_struct *vma)
-{
- struct uvc_buffer *buffer = vma->vm_private_data;
- buffer->vma_use_count++;
-}
-
-static void uvc_vm_close(struct vm_area_struct *vma)
-{
- struct uvc_buffer *buffer = vma->vm_private_data;
- buffer->vma_use_count--;
-}
-
-static const struct vm_operations_struct uvc_vm_ops = {
- .open = uvc_vm_open,
- .close = uvc_vm_close,
-};
-
static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
{
struct uvc_fh *handle = file->private_data;
struct uvc_streaming *stream = handle->stream;
- struct uvc_video_queue *queue = &stream->queue;
- struct uvc_buffer *uninitialized_var(buffer);
- struct page *page;
- unsigned long addr, start, size;
- unsigned int i;
- int ret = 0;
uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n");
- start = vma->vm_start;
- size = vma->vm_end - vma->vm_start;
-
- mutex_lock(&queue->mutex);
-
- for (i = 0; i < queue->count; ++i) {
- buffer = &queue->buffer[i];
- if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
- break;
- }
-
- if (i == queue->count || size != queue->buf_size) {
- ret = -EINVAL;
- goto done;
- }
-
- /*
- * VM_IO marks the area as being an mmaped region for I/O to a
- * device. It also prevents the region from being core dumped.
- */
- vma->vm_flags |= VM_IO;
-
- addr = (unsigned long)queue->mem + buffer->buf.m.offset;
- while (size > 0) {
- page = vmalloc_to_page((void *)addr);
- if ((ret = vm_insert_page(vma, start, page)) < 0)
- goto done;
-
- start += PAGE_SIZE;
- addr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- vma->vm_ops = &uvc_vm_ops;
- vma->vm_private_data = buffer;
- uvc_vm_open(vma);
-
-done:
- mutex_unlock(&queue->mutex);
- return ret;
+ return uvc_queue_mmap(&stream->queue, vma);
}
static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait)
@@ -1157,7 +1088,7 @@
.owner = THIS_MODULE,
.open = uvc_v4l2_open,
.release = uvc_v4l2_release,
- .ioctl = uvc_v4l2_ioctl,
+ .unlocked_ioctl = uvc_v4l2_ioctl,
.read = uvc_v4l2_read,
.mmap = uvc_v4l2_mmap,
.poll = uvc_v4l2_poll,
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 5555f01..5673d67 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -293,8 +293,6 @@
unsigned int i;
int ret;
- mutex_lock(&stream->mutex);
-
/* Perform probing. The device should adjust the requested values
* according to its capabilities. However, some devices, namely the
* first generation UVC Logitech webcams, don't implement the Video
@@ -346,7 +344,6 @@
}
done:
- mutex_unlock(&stream->mutex);
return ret;
}
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index d97cf6d..45f01e7 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -436,7 +436,9 @@
struct uvc_streaming_control ctrl;
struct uvc_format *cur_format;
struct uvc_frame *cur_frame;
-
+ /* Protect access to ctrl, cur_format, cur_frame and hardware video
+ * probe control.
+ */
struct mutex mutex;
unsigned int frozen : 1;
@@ -574,6 +576,8 @@
extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
struct uvc_buffer *buf);
+extern int uvc_queue_mmap(struct uvc_video_queue *queue,
+ struct vm_area_struct *vma);
extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
struct file *file, poll_table *wait);
extern int uvc_queue_allocated(struct uvc_video_queue *queue);
@@ -606,10 +610,10 @@
extern int uvc_status_resume(struct uvc_device *dev);
/* Controls */
-extern struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
- __u32 v4l2_id, struct uvc_control_mapping **mapping);
extern int uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
struct v4l2_queryctrl *v4l2_ctrl);
+extern int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+ struct v4l2_querymenu *query_menu);
extern int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
const struct uvc_control_mapping *mapping);
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 03f7f46..359e232 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -186,12 +186,12 @@
size_t sz, loff_t *off)
{
struct video_device *vdev = video_devdata(filp);
- int ret = -EIO;
+ int ret = -ENODEV;
if (!vdev->fops->read)
return -EINVAL;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->read(filp, buf, sz, off);
if (vdev->lock)
@@ -203,12 +203,12 @@
size_t sz, loff_t *off)
{
struct video_device *vdev = video_devdata(filp);
- int ret = -EIO;
+ int ret = -ENODEV;
if (!vdev->fops->write)
return -EINVAL;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->write(filp, buf, sz, off);
if (vdev->lock)
@@ -219,10 +219,10 @@
static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll)
{
struct video_device *vdev = video_devdata(filp);
- int ret = DEFAULT_POLLMASK;
+ int ret = POLLERR | POLLHUP;
if (!vdev->fops->poll)
- return ret;
+ return DEFAULT_POLLMASK;
if (vdev->lock)
mutex_lock(vdev->lock);
if (video_is_registered(vdev))
@@ -238,20 +238,45 @@
int ret = -ENODEV;
if (vdev->fops->unlocked_ioctl) {
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
if (vdev->lock)
mutex_unlock(vdev->lock);
} else if (vdev->fops->ioctl) {
- /* TODO: convert all drivers to unlocked_ioctl */
+ /* This code path is a replacement for the BKL. It is a major
+ * hack but it will have to do for those drivers that are not
+ * yet converted to use unlocked_ioctl.
+ *
+ * There are two options: if the driver implements struct
+ * v4l2_device, then the lock defined there is used to
+ * serialize the ioctls. Otherwise the v4l2 core lock defined
+ * below is used. This lock is really bad since it serializes
+ * completely independent devices.
+ *
+ * Both variants suffer from the same problem: if the driver
+ * sleeps, then it blocks all ioctls since the lock is still
+ * held. This is very common for VIDIOC_DQBUF since that
+ * normally waits for a frame to arrive. As a result any other
+ * ioctl calls will proceed very, very slowly since each call
+ * will have to wait for the VIDIOC_QBUF to finish. Things that
+ * should take 0.01s may now take 10-20 seconds.
+ *
+ * The workaround is to *not* take the lock for VIDIOC_DQBUF.
+ * This actually works OK for videobuf-based drivers, since
+ * videobuf will take its own internal lock.
+ */
static DEFINE_MUTEX(v4l2_ioctl_mutex);
+ struct mutex *m = vdev->v4l2_dev ?
+ &vdev->v4l2_dev->ioctl_lock : &v4l2_ioctl_mutex;
- mutex_lock(&v4l2_ioctl_mutex);
+ if (cmd != VIDIOC_DQBUF && mutex_lock_interruptible(m))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->ioctl(filp, cmd, arg);
- mutex_unlock(&v4l2_ioctl_mutex);
+ if (cmd != VIDIOC_DQBUF)
+ mutex_unlock(m);
} else
ret = -ENOTTY;
@@ -265,8 +290,8 @@
if (!vdev->fops->mmap)
return ret;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->mmap(filp, vm);
if (vdev->lock)
@@ -284,7 +309,7 @@
mutex_lock(&videodev_lock);
vdev = video_devdata(filp);
/* return ENODEV if the video device has already been removed. */
- if (vdev == NULL) {
+ if (vdev == NULL || !video_is_registered(vdev)) {
mutex_unlock(&videodev_lock);
return -ENODEV;
}
@@ -292,8 +317,10 @@
video_get(vdev);
mutex_unlock(&videodev_lock);
if (vdev->fops->open) {
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock)) {
+ ret = -ERESTARTSYS;
+ goto err;
+ }
if (video_is_registered(vdev))
ret = vdev->fops->open(filp);
else
@@ -302,6 +329,7 @@
mutex_unlock(vdev->lock);
}
+err:
/* decrease the refcount in case of an error */
if (ret)
video_put(vdev);
@@ -596,7 +624,12 @@
if (!vdev || !video_is_registered(vdev))
return;
+ mutex_lock(&videodev_lock);
+ /* This must be in a critical section to prevent a race with v4l2_open.
+ * Once this bit has been cleared video_get may never be called again.
+ */
clear_bit(V4L2_FL_REGISTERED, &vdev->flags);
+ mutex_unlock(&videodev_lock);
device_unregister(&vdev->dev);
}
EXPORT_SYMBOL(video_unregister_device);
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 0b08f96..7fe6f92 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -35,6 +35,7 @@
INIT_LIST_HEAD(&v4l2_dev->subdevs);
spin_lock_init(&v4l2_dev->lock);
+ mutex_init(&v4l2_dev->ioctl_lock);
v4l2_dev->dev = dev;
if (dev == NULL) {
/* If dev == NULL, then name must be filled in by the caller */
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index 635420d..019ee20 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -815,7 +815,7 @@
static const struct v4l2_file_operations w9966_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = w9966_v4l_read,
};
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 003170e..69546e9 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -64,77 +64,6 @@
}
}
-static bool pci_bus_resource_better(struct resource *res1, bool pos1,
- struct resource *res2, bool pos2)
-{
- /* If exactly one is positive decode, always prefer that one */
- if (pos1 != pos2)
- return pos1 ? true : false;
-
- /* Prefer the one that contains the highest address */
- if (res1->end != res2->end)
- return (res1->end > res2->end) ? true : false;
-
- /* Otherwise, prefer the one with highest "center of gravity" */
- if (res1->start != res2->start)
- return (res1->start > res2->start) ? true : false;
-
- /* Otherwise, choose one arbitrarily (but consistently) */
- return (res1 > res2) ? true : false;
-}
-
-static bool pci_bus_resource_positive(struct pci_bus *bus, struct resource *res)
-{
- struct pci_bus_resource *bus_res;
-
- /*
- * This relies on the fact that pci_bus.resource[] refers to P2P or
- * CardBus bridge base/limit registers, which are always positively
- * decoded. The pci_bus.resources list contains host bridge or
- * subtractively decoded resources.
- */
- list_for_each_entry(bus_res, &bus->resources, list) {
- if (bus_res->res == res)
- return (bus_res->flags & PCI_SUBTRACTIVE_DECODE) ?
- false : true;
- }
- return true;
-}
-
-/*
- * Find the next-best bus resource after the cursor "res". If the cursor is
- * NULL, return the best resource. "Best" means that we prefer positive
- * decode regions over subtractive decode, then those at higher addresses.
- */
-static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
- unsigned int type,
- struct resource *res)
-{
- bool res_pos, r_pos, prev_pos = false;
- struct resource *r, *prev = NULL;
- int i;
-
- res_pos = pci_bus_resource_positive(bus, res);
- pci_bus_for_each_resource(bus, r, i) {
- if (!r)
- continue;
-
- if ((r->flags & IORESOURCE_TYPE_BITS) != type)
- continue;
-
- r_pos = pci_bus_resource_positive(bus, r);
- if (!res || pci_bus_resource_better(res, res_pos, r, r_pos)) {
- if (!prev || pci_bus_resource_better(r, r_pos,
- prev, prev_pos)) {
- prev = r;
- prev_pos = r_pos;
- }
- }
- }
-
- return prev;
-}
-
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
* @bus: PCI bus
@@ -160,10 +89,9 @@
resource_size_t),
void *alignf_data)
{
- int ret = -ENOMEM;
+ int i, ret = -ENOMEM;
struct resource *r;
resource_size_t max = -1;
- unsigned int type = res->flags & IORESOURCE_TYPE_BITS;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
@@ -171,9 +99,10 @@
if (!(res->flags & IORESOURCE_MEM_64))
max = PCIBIOS_MAX_MEM_32;
- /* Look for space at highest addresses first */
- r = pci_bus_find_resource_prev(bus, type, NULL);
- for ( ; r; r = pci_bus_find_resource_prev(bus, type, r)) {
+ pci_bus_for_each_resource(bus, r, i) {
+ if (!r)
+ continue;
+
/* type_mask must match */
if ((res->flags ^ r->flags) & type_mask)
continue;
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index 0157708..09933eb 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -1417,6 +1417,11 @@
(unsigned long long)drhd->reg_base_addr, ret);
return -1;
}
+
+ /*
+ * Clear any previous faults.
+ */
+ dmar_fault(iommu->irq, iommu);
}
return 0;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 6f9350c..53a786f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2329,6 +2329,9 @@
{
u32 cfg;
+ if (!pci_find_capability(dev, PCI_CAP_ID_HT))
+ return;
+
pci_read_config_dword(dev, 0x74, &cfg);
if (cfg & ((1 << 2) | (1 << 15))) {
@@ -2764,6 +2767,29 @@
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
+#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
+#define VTUNCERRMSK_REG 0x1ac
+#define VTD_MSK_SPEC_ERRORS (1 << 31)
+/*
+ * This is a quirk for masking vt-d spec defined errors to platform error
+ * handling logic. With out this, platforms using Intel 7500, 5500 chipsets
+ * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
+ * on the RAS config settings of the platform) when a vt-d fault happens.
+ * The resulting SMI caused the system to hang.
+ *
+ * VT-d spec related errors are already handled by the VT-d OS code, so no
+ * need to report the same error through other channels.
+ */
+static void vtd_mask_spec_errors(struct pci_dev *dev)
+{
+ u32 word;
+
+ pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
+ pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
+#endif
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 5b6bbae..4a38422 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1637,9 +1637,8 @@
blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
- /* New queue, no concurrency on queue_flags */
if (!shost->use_clustering)
- queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
+ q->limits.cluster = 0;
/*
* set a reasonable default alignment on word boundaries: the
diff --git a/drivers/staging/cx25821/cx25821-video.c b/drivers/staging/cx25821/cx25821-video.c
index e7f1d57..5238930 100644
--- a/drivers/staging/cx25821/cx25821-video.c
+++ b/drivers/staging/cx25821/cx25821-video.c
@@ -92,7 +92,7 @@
return ARRAY_SIZE(formats);
}
-struct cx25821_fmt *format_by_fourcc(unsigned int fourcc)
+struct cx25821_fmt *cx25821_format_by_fourcc(unsigned int fourcc)
{
unsigned int i;
@@ -848,7 +848,7 @@
pix_format =
(dev->channels[ch_id].pixel_formats ==
PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
- fh->fmt = format_by_fourcc(pix_format);
+ fh->fmt = cx25821_format_by_fourcc(pix_format);
v4l2_prio_open(&dev->channels[ch_id].prio, &fh->prio);
@@ -1010,7 +1010,7 @@
if (0 != err)
return err;
- fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ fh->fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat);
fh->vidq.field = f->fmt.pix.field;
/* check if width and height is valid based on set standard */
@@ -1119,7 +1119,7 @@
enum v4l2_field field;
unsigned int maxw, maxh;
- fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+ fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat);
if (NULL == fmt)
return -EINVAL;
diff --git a/drivers/staging/cx25821/cx25821-video.h b/drivers/staging/cx25821/cx25821-video.h
index cc6034b..a2415d3 100644
--- a/drivers/staging/cx25821/cx25821-video.h
+++ b/drivers/staging/cx25821/cx25821-video.h
@@ -87,7 +87,7 @@
#define FORMAT_FLAGS_PACKED 0x01
extern struct cx25821_fmt formats[];
-extern struct cx25821_fmt *format_by_fourcc(unsigned int fourcc);
+extern struct cx25821_fmt *cx25821_format_by_fourcc(unsigned int fourcc);
extern struct cx25821_data timeout_data[MAX_VID_CHANNEL_NUM];
extern void cx25821_dump_video_queue(struct cx25821_dev *dev,
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 81b46585..c5f8e5b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -716,8 +716,8 @@
if (msg->len < 128)
*--dp = (msg->len << 1) | EA;
else {
- *--dp = ((msg->len & 127) << 1) | EA;
- *--dp = (msg->len >> 6) & 0xfe;
+ *--dp = (msg->len >> 7); /* bits 7 - 15 */
+ *--dp = (msg->len & 127) << 1; /* bits 0 - 6 */
}
}
@@ -968,6 +968,8 @@
{
struct gsm_msg *msg;
msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype);
+ if (msg == NULL)
+ return;
msg->data[0] = (cmd & 0xFE) << 1 | EA; /* Clear C/R */
msg->data[1] = (dlen << 1) | EA;
memcpy(msg->data + 2, data, dlen);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 9eed5b5..bcc2477 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -107,11 +107,19 @@
If you are unsure about this, say N here.
config USB_OTG
- bool
+ bool "OTG support"
depends on USB && EXPERIMENTAL
depends on USB_SUSPEND
default n
+ help
+ The most notable feature of USB OTG is support for a
+ "Dual-Role" device, which can act as either a device
+ or a host. The initial role is decided by the type of
+ plug inserted and can be changed later when two dual
+ role devices talk to each other.
+ Select this only if your board has Mini-AB/Micro-AB
+ connector.
config USB_OTG_WHITELIST
bool "Rely on OTG Targeted Peripherals List"
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 7b5cc16..8572dad 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1047,9 +1047,9 @@
kfree(cdev->req->buf);
usb_ep_free_request(gadget->ep0, cdev->req);
}
+ device_remove_file(&gadget->dev, &dev_attr_suspended);
kfree(cdev);
set_gadget_data(gadget, NULL);
- device_remove_file(&gadget->dev, &dev_attr_suspended);
composite = NULL;
}
@@ -1107,14 +1107,6 @@
*/
usb_ep_autoconfig_reset(cdev->gadget);
- /* standardized runtime overrides for device ID data */
- if (idVendor)
- cdev->desc.idVendor = cpu_to_le16(idVendor);
- if (idProduct)
- cdev->desc.idProduct = cpu_to_le16(idProduct);
- if (bcdDevice)
- cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-
/* composite gadget needs to assign strings for whole device (like
* serial number), register function drivers, potentially update
* power state and consumption, etc
@@ -1126,6 +1118,14 @@
cdev->desc = *composite->dev;
cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+ /* standardized runtime overrides for device ID data */
+ if (idVendor)
+ cdev->desc.idVendor = cpu_to_le16(idVendor);
+ if (idProduct)
+ cdev->desc.idProduct = cpu_to_le16(idProduct);
+ if (bcdDevice)
+ cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+
/* stirng overrides */
if (iManufacturer || !cdev->desc.iManufacturer) {
if (!iManufacturer && !composite->iManufacturer &&
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0fae58e..1d0f45f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1680,6 +1680,7 @@
xhci->port_array[i] = (u8) -1;
}
/* FIXME: Should we disable the port? */
+ continue;
}
xhci->port_array[i] = major_revision;
if (major_revision == 0x03)
@@ -1758,16 +1759,20 @@
return -ENOMEM;
port_index = 0;
- for (i = 0; i < num_ports; i++)
- if (xhci->port_array[i] != 0x03) {
- xhci->usb2_ports[port_index] =
- &xhci->op_regs->port_status_base +
- NUM_PORT_REGS*i;
- xhci_dbg(xhci, "USB 2.0 port at index %u, "
- "addr = %p\n", i,
- xhci->usb2_ports[port_index]);
- port_index++;
- }
+ for (i = 0; i < num_ports; i++) {
+ if (xhci->port_array[i] == 0x03 ||
+ xhci->port_array[i] == 0 ||
+ xhci->port_array[i] == -1)
+ continue;
+
+ xhci->usb2_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 2.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb2_ports[port_index]);
+ port_index++;
+ }
}
if (xhci->num_usb3_ports) {
xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 796e2f6..4ff2158 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -3,7 +3,7 @@
/*
* uss720.c -- USS720 USB Parport Cable.
*
- * Copyright (C) 1999, 2005
+ * Copyright (C) 1999, 2005, 2010
* Thomas Sailer (t.sailer@alumni.ethz.ch)
*
* This program is free software; you can redistribute it and/or modify
@@ -776,6 +776,8 @@
{ USB_DEVICE(0x0557, 0x2001) },
{ USB_DEVICE(0x0729, 0x1284) },
{ USB_DEVICE(0x1293, 0x0002) },
+ { USB_DEVICE(0x1293, 0x0002) },
+ { USB_DEVICE(0x050d, 0x0002) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 6a50965..2dec500 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -796,6 +796,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1286f1e2..bf08672 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1081,6 +1081,11 @@
#define MJSG_HD_RADIO_PID 0x937C
/*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
+/*
* Xverve Signalyzer tools (http://www.signalyzer.com/)
*/
#define XVERVE_SIGNALYZER_ST_PID 0xBCA0
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6ccdd3d..fcc1e32 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -481,6 +481,13 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
+/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
+UNUSUAL_DEV( 0x04e8, 0x5122, 0x0000, 0x9999,
+ "Samsung",
+ "YP-CP3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+
/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
* Device uses standards-violating 32-byte Bulk Command Block Wrappers and
* reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 455c605..083c8fe 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,7 +1,7 @@
config FB_OMAP
tristate "OMAP frame buffer support (EXPERIMENTAL)"
- depends on FB && ARCH_OMAP && (OMAP2_DSS = "n")
-
+ depends on FB && (OMAP2_DSS = "n")
+ depends on ARCH_OMAP1 || ARCH_OMAP2 || ARCH_OMAP3
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 2fd7e52..9441e2e 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -551,7 +551,7 @@
if (!size)
return;
- size = PAGE_ALIGN(size);
+ size = ALIGN(size, SZ_2M);
if (paddr) {
if (paddr & ~PAGE_MASK) {
@@ -576,7 +576,7 @@
return;
}
} else {
- paddr = memblock_alloc(size, PAGE_SIZE);
+ paddr = memblock_alloc(size, SZ_2M);
}
memblock_free(paddr, size);
diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index 6f04444..659f532 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -166,7 +166,7 @@
static struct dentry *btrfs_get_parent(struct dentry *child)
{
struct inode *dir = child->d_inode;
- static struct dentry *dentry;
+ struct dentry *dentry;
struct btrfs_root *root = BTRFS_I(dir)->root;
struct btrfs_path *path;
struct extent_buffer *leaf;
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 158c700..d902948 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -40,7 +40,8 @@
if (dentry->d_fsdata)
return 0;
- if (ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
+ if (dentry->d_parent == NULL || /* nfs fh_to_dentry */
+ ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
dentry->d_op = &ceph_dentry_ops;
else if (ceph_snap(dentry->d_parent->d_inode) == CEPH_SNAPDIR)
dentry->d_op = &ceph_snapdir_dentry_ops;
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 8d79b89..7d0e4a8 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -282,7 +282,8 @@
static int striped_read(struct inode *inode,
u64 off, u64 len,
struct page **pages, int num_pages,
- int *checkeof, bool align_to_pages)
+ int *checkeof, bool align_to_pages,
+ unsigned long buf_align)
{
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_inode_info *ci = ceph_inode(inode);
@@ -307,7 +308,7 @@
more:
if (align_to_pages)
- page_align = (pos - io_align) & ~PAGE_MASK;
+ page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
else
page_align = pos & ~PAGE_MASK;
this_len = left;
@@ -376,16 +377,18 @@
struct inode *inode = file->f_dentry->d_inode;
struct page **pages;
u64 off = *poff;
- int num_pages = calc_pages_for(off, len);
- int ret;
+ int num_pages, ret;
dout("sync_read on file %p %llu~%u %s\n", file, off, len,
(file->f_flags & O_DIRECT) ? "O_DIRECT" : "");
- if (file->f_flags & O_DIRECT)
- pages = ceph_get_direct_page_vector(data, num_pages);
- else
+ if (file->f_flags & O_DIRECT) {
+ num_pages = calc_pages_for((unsigned long)data, len);
+ pages = ceph_get_direct_page_vector(data, num_pages, true);
+ } else {
+ num_pages = calc_pages_for(off, len);
pages = ceph_alloc_page_vector(num_pages, GFP_NOFS);
+ }
if (IS_ERR(pages))
return PTR_ERR(pages);
@@ -400,7 +403,8 @@
goto done;
ret = striped_read(inode, off, len, pages, num_pages, checkeof,
- file->f_flags & O_DIRECT);
+ file->f_flags & O_DIRECT,
+ (unsigned long)data & ~PAGE_MASK);
if (ret >= 0 && (file->f_flags & O_DIRECT) == 0)
ret = ceph_copy_page_vector_to_user(pages, data, off, ret);
@@ -409,7 +413,7 @@
done:
if (file->f_flags & O_DIRECT)
- ceph_put_page_vector(pages, num_pages);
+ ceph_put_page_vector(pages, num_pages, true);
else
ceph_release_page_vector(pages, num_pages);
dout("sync_read result %d\n", ret);
@@ -456,6 +460,7 @@
int do_sync = 0;
int check_caps = 0;
int page_align, io_align;
+ unsigned long buf_align;
int ret;
struct timespec mtime = CURRENT_TIME;
@@ -471,6 +476,7 @@
pos = *offset;
io_align = pos & ~PAGE_MASK;
+ buf_align = (unsigned long)data & ~PAGE_MASK;
ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + left);
if (ret < 0)
@@ -496,12 +502,15 @@
*/
more:
len = left;
- if (file->f_flags & O_DIRECT)
+ if (file->f_flags & O_DIRECT) {
/* write from beginning of first page, regardless of
io alignment */
- page_align = (pos - io_align) & ~PAGE_MASK;
- else
+ page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
+ num_pages = calc_pages_for((unsigned long)data, len);
+ } else {
page_align = pos & ~PAGE_MASK;
+ num_pages = calc_pages_for(pos, len);
+ }
req = ceph_osdc_new_request(&fsc->client->osdc, &ci->i_layout,
ceph_vino(inode), pos, &len,
CEPH_OSD_OP_WRITE, flags,
@@ -512,10 +521,8 @@
if (!req)
return -ENOMEM;
- num_pages = calc_pages_for(pos, len);
-
if (file->f_flags & O_DIRECT) {
- pages = ceph_get_direct_page_vector(data, num_pages);
+ pages = ceph_get_direct_page_vector(data, num_pages, false);
if (IS_ERR(pages)) {
ret = PTR_ERR(pages);
goto out;
@@ -565,7 +572,7 @@
}
if (file->f_flags & O_DIRECT)
- ceph_put_page_vector(pages, num_pages);
+ ceph_put_page_vector(pages, num_pages, false);
else if (file->f_flags & O_SYNC)
ceph_release_page_vector(pages, num_pages);
diff --git a/fs/namei.c b/fs/namei.c
index 5362af9..4ff7ca5 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1748,6 +1748,9 @@
if (!(open_flag & O_CREAT))
mode = 0;
+ /* Must never be set by userspace */
+ open_flag &= ~FMODE_NONOTIFY;
+
/*
* O_SYNC is implemented as __O_SYNC|O_DSYNC. As many places only
* check for O_DSYNC if the need any syncing at all we enforce it's
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 33ad25d..caf9a6a 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -176,7 +176,6 @@
int nilfs_init_gcinode(struct inode *inode)
{
struct nilfs_inode_info *ii = NILFS_I(inode);
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
inode->i_mode = S_IFREG;
mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
@@ -186,14 +185,6 @@
ii->i_flags = 0;
nilfs_bmap_init_gc(ii->i_bmap);
- /*
- * Add the inode to GC inode list. Garbage Collection
- * is serialized and no two processes manipulate the
- * list simultaneously.
- */
- igrab(inode);
- list_add(&NILFS_I(inode)->i_dirty, &nilfs->ns_gc_inodes);
-
return 0;
}
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index e00d945..b185e93 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -337,6 +337,7 @@
struct nilfs_argv *argv, void *buf)
{
size_t nmembs = argv->v_nmembs;
+ struct the_nilfs *nilfs = NILFS_SB(sb)->s_nilfs;
struct inode *inode;
struct nilfs_vdesc *vdesc;
struct buffer_head *bh, *n;
@@ -353,6 +354,17 @@
ret = PTR_ERR(inode);
goto failed;
}
+ if (list_empty(&NILFS_I(inode)->i_dirty)) {
+ /*
+ * Add the inode to GC inode list. Garbage Collection
+ * is serialized and no two processes manipulate the
+ * list simultaneously.
+ */
+ igrab(inode);
+ list_add(&NILFS_I(inode)->i_dirty,
+ &nilfs->ns_gc_inodes);
+ }
+
do {
ret = nilfs_ioctl_move_inode_block(inode, vdesc,
&buffers);
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index b04f88e..f35794b 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -92,7 +92,11 @@
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- wait_event(group->fanotify_data.access_waitq, event->response);
+ wait_event(group->fanotify_data.access_waitq, event->response ||
+ atomic_read(&group->fanotify_data.bypass_perm));
+
+ if (!event->response) /* bypass_perm set */
+ return 0;
/* userspace responded, convert to something usable */
spin_lock(&event->lock);
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 0632248..8b61220 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -106,20 +106,29 @@
return client_fd;
}
-static ssize_t fill_event_metadata(struct fsnotify_group *group,
+static int fill_event_metadata(struct fsnotify_group *group,
struct fanotify_event_metadata *metadata,
struct fsnotify_event *event)
{
+ int ret = 0;
+
pr_debug("%s: group=%p metadata=%p event=%p\n", __func__,
group, metadata, event);
metadata->event_len = FAN_EVENT_METADATA_LEN;
+ metadata->metadata_len = FAN_EVENT_METADATA_LEN;
metadata->vers = FANOTIFY_METADATA_VERSION;
metadata->mask = event->mask & FAN_ALL_OUTGOING_EVENTS;
metadata->pid = pid_vnr(event->tgid);
- metadata->fd = create_fd(group, event);
+ if (unlikely(event->mask & FAN_Q_OVERFLOW))
+ metadata->fd = FAN_NOFD;
+ else {
+ metadata->fd = create_fd(group, event);
+ if (metadata->fd < 0)
+ ret = metadata->fd;
+ }
- return metadata->fd;
+ return ret;
}
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
@@ -200,7 +209,7 @@
mutex_lock(&group->fanotify_data.access_mutex);
- if (group->fanotify_data.bypass_perm) {
+ if (atomic_read(&group->fanotify_data.bypass_perm)) {
mutex_unlock(&group->fanotify_data.access_mutex);
kmem_cache_free(fanotify_response_event_cache, re);
event->response = FAN_ALLOW;
@@ -257,24 +266,34 @@
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- fd = fill_event_metadata(group, &fanotify_event_metadata, event);
- if (fd < 0)
- return fd;
+ ret = fill_event_metadata(group, &fanotify_event_metadata, event);
+ if (ret < 0)
+ goto out;
+ fd = fanotify_event_metadata.fd;
ret = prepare_for_access_response(group, event, fd);
if (ret)
goto out_close_fd;
ret = -EFAULT;
- if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
+ if (copy_to_user(buf, &fanotify_event_metadata,
+ fanotify_event_metadata.event_len))
goto out_kill_access_response;
- return FAN_EVENT_METADATA_LEN;
+ return fanotify_event_metadata.event_len;
out_kill_access_response:
remove_access_response(group, event, fd);
out_close_fd:
- sys_close(fd);
+ if (fd != FAN_NOFD)
+ sys_close(fd);
+out:
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ if (event->mask & FAN_ALL_PERM_EVENTS) {
+ event->response = FAN_DENY;
+ wake_up(&group->fanotify_data.access_waitq);
+ }
+#endif
return ret;
}
@@ -382,7 +401,7 @@
mutex_lock(&group->fanotify_data.access_mutex);
- group->fanotify_data.bypass_perm = true;
+ atomic_inc(&group->fanotify_data.bypass_perm);
list_for_each_entry_safe(re, lre, &group->fanotify_data.access_list, list) {
pr_debug("%s: found group=%p re=%p event=%p\n", __func__, group,
@@ -586,11 +605,10 @@
{
struct fsnotify_mark *fsn_mark;
__u32 added;
+ int ret = 0;
fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
if (!fsn_mark) {
- int ret;
-
if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
return -ENOSPC;
@@ -600,17 +618,16 @@
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, NULL, mnt, 0);
- if (ret) {
- fanotify_free_mark(fsn_mark);
- return ret;
- }
+ if (ret)
+ goto err;
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
- fsnotify_put_mark(fsn_mark);
+
if (added & ~mnt->mnt_fsnotify_mask)
fsnotify_recalc_vfsmount_mask(mnt);
-
- return 0;
+err:
+ fsnotify_put_mark(fsn_mark);
+ return ret;
}
static int fanotify_add_inode_mark(struct fsnotify_group *group,
@@ -619,6 +636,7 @@
{
struct fsnotify_mark *fsn_mark;
__u32 added;
+ int ret = 0;
pr_debug("%s: group=%p inode=%p\n", __func__, group, inode);
@@ -634,8 +652,6 @@
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark) {
- int ret;
-
if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
return -ENOSPC;
@@ -645,16 +661,16 @@
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, inode, NULL, 0);
- if (ret) {
- fanotify_free_mark(fsn_mark);
- return ret;
- }
+ if (ret)
+ goto err;
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
- fsnotify_put_mark(fsn_mark);
+
if (added & ~inode->i_fsnotify_mask)
fsnotify_recalc_inode_mask(inode);
- return 0;
+err:
+ fsnotify_put_mark(fsn_mark);
+ return ret;
}
/* fanotify syscalls */
@@ -687,8 +703,10 @@
/* fsnotify_alloc_group takes a ref. Dropped in fanotify_release */
group = fsnotify_alloc_group(&fanotify_fsnotify_ops);
- if (IS_ERR(group))
+ if (IS_ERR(group)) {
+ free_uid(user);
return PTR_ERR(group);
+ }
group->fanotify_data.user = user;
atomic_inc(&user->fanotify_listeners);
@@ -698,6 +716,7 @@
mutex_init(&group->fanotify_data.access_mutex);
init_waitqueue_head(&group->fanotify_data.access_waitq);
INIT_LIST_HEAD(&group->fanotify_data.access_list);
+ atomic_set(&group->fanotify_data.bypass_perm, 0);
#endif
switch (flags & FAN_ALL_CLASS_BITS) {
case FAN_CLASS_NOTIF:
@@ -764,8 +783,10 @@
if (flags & ~FAN_ALL_MARK_FLAGS)
return -EINVAL;
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
- case FAN_MARK_ADD:
+ case FAN_MARK_ADD: /* fallthrough */
case FAN_MARK_REMOVE:
+ if (!mask)
+ return -EINVAL;
case FAN_MARK_FLUSH:
break;
default:
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 444c305..4cd5d5d 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -752,6 +752,7 @@
if (ret >= 0)
return ret;
+ fsnotify_put_group(group);
atomic_dec(&user->inotify_devs);
out_free_uid:
free_uid(user);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index aae86fd..36ab42c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -250,7 +250,7 @@
unsigned char misaligned;
unsigned char discard_misaligned;
- unsigned char no_cluster;
+ unsigned char cluster;
signed char discard_zeroes_data;
};
@@ -380,7 +380,6 @@
#endif
};
-#define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */
#define QUEUE_FLAG_QUEUED 1 /* uses generic tag queueing */
#define QUEUE_FLAG_STOPPED 2 /* queue is stopped */
#define QUEUE_FLAG_SYNCFULL 3 /* read queue has been filled */
@@ -403,7 +402,6 @@
#define QUEUE_FLAG_SECDISCARD 19 /* supports SECDISCARD */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
- (1 << QUEUE_FLAG_CLUSTER) | \
(1 << QUEUE_FLAG_STACKABLE) | \
(1 << QUEUE_FLAG_SAME_COMP) | \
(1 << QUEUE_FLAG_ADD_RANDOM))
@@ -510,6 +508,11 @@
#define rq_data_dir(rq) ((rq)->cmd_flags & 1)
+static inline unsigned int blk_queue_cluster(struct request_queue *q)
+{
+ return q->limits.cluster;
+}
+
/*
* We regard a request as sync, if either a read or a sync write
*/
@@ -805,6 +808,7 @@
extern void blk_cleanup_queue(struct request_queue *);
extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
extern void blk_queue_bounce_limit(struct request_queue *, u64);
+extern void blk_limits_max_hw_sectors(struct queue_limits *, unsigned int);
extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
extern void blk_queue_max_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 266ab92..499dfe9 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -105,6 +105,8 @@
#define alloc_bootmem(x) \
__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_align(x, align) \
+ __alloc_bootmem(x, align, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_nopanic(x) \
__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_pages(x) \
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index 9e76d35..72c72bf 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -227,8 +227,10 @@
extern void ceph_release_page_vector(struct page **pages, int num_pages);
extern struct page **ceph_get_direct_page_vector(const char __user *data,
- int num_pages);
-extern void ceph_put_page_vector(struct page **pages, int num_pages);
+ int num_pages,
+ bool write_page);
+extern void ceph_put_page_vector(struct page **pages, int num_pages,
+ bool dirty);
extern void ceph_release_page_vector(struct page **pages, int num_pages);
extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
extern int ceph_copy_user_to_page_vector(struct page **pages,
diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
index 7605fdd..e3d8bf2 100644
--- a/include/linux/cnt32_to_63.h
+++ b/include/linux/cnt32_to_63.h
@@ -61,13 +61,31 @@
*
* 2) this code must not be preempted for a duration longer than the
* 32-bit counter half period minus the longest period between two
- * calls to this code.
+ * calls to this code;
*
* Those requirements ensure proper update to the state bit in memory.
* This is usually not a problem in practice, but if it is then a kernel
* timer should be scheduled to manage for this code to be executed often
* enough.
*
+ * And finally:
+ *
+ * 3) the cnt_lo argument must be seen as a globally incrementing value,
+ * meaning that it should be a direct reference to the counter data which
+ * can be evaluated according to a specific ordering within the macro,
+ * and not the result of a previous evaluation stored in a variable.
+ *
+ * For example, this is wrong:
+ *
+ * u32 partial = get_hw_count();
+ * u64 full = cnt32_to_63(partial);
+ * return full;
+ *
+ * This is fine:
+ *
+ * u64 full = cnt32_to_63(get_hw_count());
+ * return full;
+ *
* Note that the top bit (bit 63) in the returned value should be considered
* as garbage. It is not cleared here because callers are likely to use a
* multiplier on the returned value which can get rid of the top bit
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 0f01214..6c6133f 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -83,11 +83,13 @@
FAN_ALL_PERM_EVENTS |\
FAN_Q_OVERFLOW)
-#define FANOTIFY_METADATA_VERSION 2
+#define FANOTIFY_METADATA_VERSION 3
struct fanotify_event_metadata {
__u32 event_len;
- __u32 vers;
+ __u8 vers;
+ __u8 reserved;
+ __u16 metadata_len;
__aligned_u64 mask;
__s32 fd;
__s32 pid;
@@ -96,11 +98,13 @@
struct fanotify_response {
__s32 fd;
__u32 response;
-} __attribute__ ((packed));
+};
/* Legit userspace responses to a _PERM event */
#define FAN_ALLOW 0x01
#define FAN_DENY 0x02
+/* No fd set in event */
+#define FAN_NOFD -1
/* Helper functions to deal with fanotify_event_metadata buffers */
#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 5c185fa..b10bcde 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -235,9 +235,6 @@
if (S_ISDIR(inode->i_mode))
mask |= FS_ISDIR;
- /* FMODE_NONOTIFY must never be set from user */
- file->f_mode &= ~FMODE_NONOTIFY;
-
fsnotify_parent(path, NULL, mask);
fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 0a68f92..7380763 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -166,7 +166,7 @@
struct mutex access_mutex;
struct list_head access_list;
wait_queue_head_t access_waitq;
- bool bypass_perm; /* protected by access_mutex */
+ atomic_t bypass_perm;
#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
int f_flags;
unsigned int max_marks;
diff --git a/include/linux/input.h b/include/linux/input.h
index a8af21d..9777668 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -104,8 +104,10 @@
#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
-#define EVIOCGKEYCODE _IOR('E', 0x04, struct input_keymap_entry) /* get keycode */
-#define EVIOCSKEYCODE _IOW('E', 0x04, struct input_keymap_entry) /* set keycode */
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
+#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index 80352ad..6974746 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -9,7 +9,7 @@
#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
(((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
- (val & 0xffff))
+ ((val) & 0xffff))
#define KEY_ROW(k) (((k) >> 24) & 0xff)
#define KEY_COL(k) (((k) >> 16) & 0xff)
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index d377ea8..e9bb22c 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -112,7 +112,6 @@
/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
extern struct resource ioport_resource;
extern struct resource iomem_resource;
-extern int resource_alloc_from_bottom;
extern struct resource *request_resource_conflict(struct resource *root, struct resource *new);
extern int request_resource(struct resource *root, struct resource *new);
@@ -124,6 +123,7 @@
extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new);
extern int insert_resource(struct resource *parent, struct resource *new);
extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
+extern void arch_remove_reservations(struct resource *avail);
extern int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index de2c417..4f1279e 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -887,6 +887,7 @@
int exclusive;
struct list_head rotation_list;
int jiffies_interval;
+ struct pmu *active_pmu;
};
struct perf_output_handle {
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 3ec2358..d19f1cc 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -77,7 +77,8 @@
static inline bool pm_runtime_suspended(struct device *dev)
{
- return dev->power.runtime_status == RPM_SUSPENDED;
+ return dev->power.runtime_status == RPM_SUSPENDED
+ && !dev->power.disable_depth;
}
static inline void pm_runtime_mark_last_busy(struct device *dev)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 2c79e92..2238745 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -143,7 +143,7 @@
extern unsigned long this_cpu_load(void);
-extern void calc_global_load(void);
+extern void calc_global_load(unsigned long ticks);
extern unsigned long get_parent_ip(unsigned long addr);
diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h
index 942e387..eba52a1 100644
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -96,16 +96,21 @@
return 0;
}
-extern char * nvram_get(const char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
-#ifdef CONFIG_BCM47XX
- char *res = nvram_get("et0macaddr");
- if (res)
- memcpy(macaddr, res, 6);
-#endif
+ char buf[20];
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+ return;
+ nvram_parse_macaddr(buf, macaddr);
}
+#else
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
+#endif
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 7a9f76e..ac7ce00 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -161,7 +161,7 @@
extern struct mutex saa7146_devices_lock;
int saa7146_register_extension(struct saa7146_extension*);
int saa7146_unregister_extension(struct saa7146_extension*);
-struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index 6648036..b16f307 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -51,6 +51,8 @@
unsigned int notification, void *arg);
/* The control handler. May be NULL. */
struct v4l2_ctrl_handler *ctrl_handler;
+ /* BKL replacement mutex. Temporary solution only. */
+ struct mutex ioctl_lock;
};
/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
diff --git a/kernel/fork.c b/kernel/fork.c
index 3b159c5..5447dc7 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -273,6 +273,7 @@
setup_thread_stack(tsk, orig);
clear_user_return_notifier(tsk);
+ clear_tsk_need_resched(tsk);
stackend = end_of_stack(tsk);
*stackend = STACK_END_MAGIC; /* for overflow detection */
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index eac7e33..2870fee 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -3824,6 +3824,8 @@
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_task_ctx(&cpuctx->ctx, task_event);
ctx = task_event->task_ctx;
@@ -3959,6 +3961,8 @@
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_comm_ctx(&cpuctx->ctx, comm_event);
ctxn = pmu->task_ctx_nr;
@@ -4144,6 +4148,8 @@
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_mmap_ctx(&cpuctx->ctx, mmap_event,
vma->vm_flags & VM_EXEC);
@@ -4713,7 +4719,7 @@
break;
}
- if (event_id > PERF_COUNT_SW_MAX)
+ if (event_id >= PERF_COUNT_SW_MAX)
return -ENOENT;
if (!event->parent) {
@@ -5145,20 +5151,36 @@
return NULL;
}
-static void free_pmu_context(void * __percpu cpu_context)
+static void update_pmu_context(struct pmu *pmu, struct pmu *old_pmu)
{
- struct pmu *pmu;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct perf_cpu_context *cpuctx;
+
+ cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
+
+ if (cpuctx->active_pmu == old_pmu)
+ cpuctx->active_pmu = pmu;
+ }
+}
+
+static void free_pmu_context(struct pmu *pmu)
+{
+ struct pmu *i;
mutex_lock(&pmus_lock);
/*
* Like a real lame refcount.
*/
- list_for_each_entry(pmu, &pmus, entry) {
- if (pmu->pmu_cpu_context == cpu_context)
+ list_for_each_entry(i, &pmus, entry) {
+ if (i->pmu_cpu_context == pmu->pmu_cpu_context) {
+ update_pmu_context(i, pmu);
goto out;
+ }
}
- free_percpu(cpu_context);
+ free_percpu(pmu->pmu_cpu_context);
out:
mutex_unlock(&pmus_lock);
}
@@ -5190,6 +5212,7 @@
cpuctx->ctx.pmu = pmu;
cpuctx->jiffies_interval = 1;
INIT_LIST_HEAD(&cpuctx->rotation_list);
+ cpuctx->active_pmu = pmu;
}
got_cpu_context:
@@ -5241,7 +5264,7 @@
synchronize_rcu();
free_percpu(pmu->pmu_disable_count);
- free_pmu_context(pmu->pmu_cpu_context);
+ free_pmu_context(pmu);
}
struct pmu *perf_init_event(struct perf_event *event)
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index baf667b..8c7e483 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -30,7 +30,7 @@
#include "power.h"
-#define HIBERNATE_SIG "LINHIB0001"
+#define HIBERNATE_SIG "S1SUSPEND"
/*
* The swap map is a data structure used for keeping track of each page
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 1b2ea31..c36c3b9 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -137,7 +137,7 @@
free_all_swap_pages(data->swap);
if (data->frozen)
thaw_processes();
- pm_notifier_call_chain(data->mode == O_WRONLY ?
+ pm_notifier_call_chain(data->mode == O_RDONLY ?
PM_POST_HIBERNATION : PM_POST_RESTORE);
atomic_inc(&snapshot_device_available);
diff --git a/kernel/resource.c b/kernel/resource.c
index 9fad33e..798e2fa 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -40,23 +40,6 @@
static DEFINE_RWLOCK(resource_lock);
-/*
- * By default, we allocate free space bottom-up. The architecture can request
- * top-down by clearing this flag. The user can override the architecture's
- * choice with the "resource_alloc_from_bottom" kernel boot option, but that
- * should only be a debugging tool.
- */
-int resource_alloc_from_bottom = 1;
-
-static __init int setup_alloc_from_bottom(char *s)
-{
- printk(KERN_INFO
- "resource: allocating from bottom-up; please report a bug\n");
- resource_alloc_from_bottom = 1;
- return 0;
-}
-early_param("resource_alloc_from_bottom", setup_alloc_from_bottom);
-
static void *r_next(struct seq_file *m, void *v, loff_t *pos)
{
struct resource *p = v;
@@ -374,6 +357,10 @@
return walk_system_ram_range(pfn, 1, NULL, __is_ram) == 1;
}
+void __weak arch_remove_reservations(struct resource *avail)
+{
+}
+
static resource_size_t simple_align_resource(void *data,
const struct resource *avail,
resource_size_t size,
@@ -397,74 +384,7 @@
}
/*
- * Find the resource before "child" in the sibling list of "root" children.
- */
-static struct resource *find_sibling_prev(struct resource *root, struct resource *child)
-{
- struct resource *this;
-
- for (this = root->child; this; this = this->sibling)
- if (this->sibling == child)
- return this;
-
- return NULL;
-}
-
-/*
* Find empty slot in the resource tree given range and alignment.
- * This version allocates from the end of the root resource first.
- */
-static int find_resource_from_top(struct resource *root, struct resource *new,
- resource_size_t size, resource_size_t min,
- resource_size_t max, resource_size_t align,
- resource_size_t (*alignf)(void *,
- const struct resource *,
- resource_size_t,
- resource_size_t),
- void *alignf_data)
-{
- struct resource *this;
- struct resource tmp, avail, alloc;
-
- tmp.start = root->end;
- tmp.end = root->end;
-
- this = find_sibling_prev(root, NULL);
- for (;;) {
- if (this) {
- if (this->end < root->end)
- tmp.start = this->end + 1;
- } else
- tmp.start = root->start;
-
- resource_clip(&tmp, min, max);
-
- /* Check for overflow after ALIGN() */
- avail = *new;
- avail.start = ALIGN(tmp.start, align);
- avail.end = tmp.end;
- if (avail.start >= tmp.start) {
- alloc.start = alignf(alignf_data, &avail, size, align);
- alloc.end = alloc.start + size - 1;
- if (resource_contains(&avail, &alloc)) {
- new->start = alloc.start;
- new->end = alloc.end;
- return 0;
- }
- }
-
- if (!this || this->start == root->start)
- break;
-
- tmp.end = this->start - 1;
- this = find_sibling_prev(root, this);
- }
- return -EBUSY;
-}
-
-/*
- * Find empty slot in the resource tree given range and alignment.
- * This version allocates from the beginning of the root resource first.
*/
static int find_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
@@ -478,23 +398,24 @@
struct resource *this = root->child;
struct resource tmp = *new, avail, alloc;
+ tmp.flags = new->flags;
tmp.start = root->start;
/*
- * Skip past an allocated resource that starts at 0, since the
- * assignment of this->start - 1 to tmp->end below would cause an
- * underflow.
+ * Skip past an allocated resource that starts at 0, since the assignment
+ * of this->start - 1 to tmp->end below would cause an underflow.
*/
if (this && this->start == 0) {
tmp.start = this->end + 1;
this = this->sibling;
}
- for (;;) {
+ for(;;) {
if (this)
tmp.end = this->start - 1;
else
tmp.end = root->end;
resource_clip(&tmp, min, max);
+ arch_remove_reservations(&tmp);
/* Check for overflow after ALIGN() */
avail = *new;
@@ -509,10 +430,8 @@
return 0;
}
}
-
if (!this)
break;
-
tmp.start = this->end + 1;
this = this->sibling;
}
@@ -545,10 +464,7 @@
alignf = simple_align_resource;
write_lock(&resource_lock);
- if (resource_alloc_from_bottom)
- err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
- else
- err = find_resource_from_top(root, new, size, min, max, align, alignf, alignf_data);
+ err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
if (err >= 0 && __request_resource(root, new))
err = -EBUSY;
write_unlock(&resource_lock);
diff --git a/kernel/sched.c b/kernel/sched.c
index dc91a4d..297d1a0 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -636,22 +636,18 @@
#endif /* CONFIG_CGROUP_SCHED */
-static u64 irq_time_cpu(int cpu);
-static void sched_irq_time_avg_update(struct rq *rq, u64 irq_time);
+static void update_rq_clock_task(struct rq *rq, s64 delta);
-inline void update_rq_clock(struct rq *rq)
+static void update_rq_clock(struct rq *rq)
{
- if (!rq->skip_clock_update) {
- int cpu = cpu_of(rq);
- u64 irq_time;
+ s64 delta;
- rq->clock = sched_clock_cpu(cpu);
- irq_time = irq_time_cpu(cpu);
- if (rq->clock - irq_time > rq->clock_task)
- rq->clock_task = rq->clock - irq_time;
+ if (rq->skip_clock_update)
+ return;
- sched_irq_time_avg_update(rq, irq_time);
- }
+ delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
+ rq->clock += delta;
+ update_rq_clock_task(rq, delta);
}
/*
@@ -1924,10 +1920,9 @@
* They are read and saved off onto struct rq in update_rq_clock().
* This may result in other CPU reading this CPU's irq time and can
* race with irq/account_system_vtime on this CPU. We would either get old
- * or new value (or semi updated value on 32 bit) with a side effect of
- * accounting a slice of irq time to wrong task when irq is in progress
- * while we read rq->clock. That is a worthy compromise in place of having
- * locks on each irq in account_system_time.
+ * or new value with a side effect of accounting a slice of irq time to wrong
+ * task when irq is in progress while we read rq->clock. That is a worthy
+ * compromise in place of having locks on each irq in account_system_time.
*/
static DEFINE_PER_CPU(u64, cpu_hardirq_time);
static DEFINE_PER_CPU(u64, cpu_softirq_time);
@@ -1945,19 +1940,58 @@
sched_clock_irqtime = 0;
}
-static u64 irq_time_cpu(int cpu)
-{
- if (!sched_clock_irqtime)
- return 0;
+#ifndef CONFIG_64BIT
+static DEFINE_PER_CPU(seqcount_t, irq_time_seq);
- return per_cpu(cpu_softirq_time, cpu) + per_cpu(cpu_hardirq_time, cpu);
+static inline void irq_time_write_begin(void)
+{
+ __this_cpu_inc(irq_time_seq.sequence);
+ smp_wmb();
}
+static inline void irq_time_write_end(void)
+{
+ smp_wmb();
+ __this_cpu_inc(irq_time_seq.sequence);
+}
+
+static inline u64 irq_time_read(int cpu)
+{
+ u64 irq_time;
+ unsigned seq;
+
+ do {
+ seq = read_seqcount_begin(&per_cpu(irq_time_seq, cpu));
+ irq_time = per_cpu(cpu_softirq_time, cpu) +
+ per_cpu(cpu_hardirq_time, cpu);
+ } while (read_seqcount_retry(&per_cpu(irq_time_seq, cpu), seq));
+
+ return irq_time;
+}
+#else /* CONFIG_64BIT */
+static inline void irq_time_write_begin(void)
+{
+}
+
+static inline void irq_time_write_end(void)
+{
+}
+
+static inline u64 irq_time_read(int cpu)
+{
+ return per_cpu(cpu_softirq_time, cpu) + per_cpu(cpu_hardirq_time, cpu);
+}
+#endif /* CONFIG_64BIT */
+
+/*
+ * Called before incrementing preempt_count on {soft,}irq_enter
+ * and before decrementing preempt_count on {soft,}irq_exit.
+ */
void account_system_vtime(struct task_struct *curr)
{
unsigned long flags;
+ s64 delta;
int cpu;
- u64 now, delta;
if (!sched_clock_irqtime)
return;
@@ -1965,9 +1999,10 @@
local_irq_save(flags);
cpu = smp_processor_id();
- now = sched_clock_cpu(cpu);
- delta = now - per_cpu(irq_start_time, cpu);
- per_cpu(irq_start_time, cpu) = now;
+ delta = sched_clock_cpu(cpu) - __this_cpu_read(irq_start_time);
+ __this_cpu_add(irq_start_time, delta);
+
+ irq_time_write_begin();
/*
* We do not account for softirq time from ksoftirqd here.
* We want to continue accounting softirq time to ksoftirqd thread
@@ -1975,33 +2010,55 @@
* that do not consume any time, but still wants to run.
*/
if (hardirq_count())
- per_cpu(cpu_hardirq_time, cpu) += delta;
+ __this_cpu_add(cpu_hardirq_time, delta);
else if (in_serving_softirq() && !(curr->flags & PF_KSOFTIRQD))
- per_cpu(cpu_softirq_time, cpu) += delta;
+ __this_cpu_add(cpu_softirq_time, delta);
+ irq_time_write_end();
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(account_system_vtime);
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
{
- if (sched_clock_irqtime && sched_feat(NONIRQ_POWER)) {
- u64 delta_irq = curr_irq_time - rq->prev_irq_time;
- rq->prev_irq_time = curr_irq_time;
- sched_rt_avg_update(rq, delta_irq);
- }
+ s64 irq_delta;
+
+ irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
+
+ /*
+ * Since irq_time is only updated on {soft,}irq_exit, we might run into
+ * this case when a previous update_rq_clock() happened inside a
+ * {soft,}irq region.
+ *
+ * When this happens, we stop ->clock_task and only update the
+ * prev_irq_time stamp to account for the part that fit, so that a next
+ * update will consume the rest. This ensures ->clock_task is
+ * monotonic.
+ *
+ * It does however cause some slight miss-attribution of {soft,}irq
+ * time, a more accurate solution would be to update the irq_time using
+ * the current rq->clock timestamp, except that would require using
+ * atomic ops.
+ */
+ if (irq_delta > delta)
+ irq_delta = delta;
+
+ rq->prev_irq_time += irq_delta;
+ delta -= irq_delta;
+ rq->clock_task += delta;
+
+ if (irq_delta && sched_feat(NONIRQ_POWER))
+ sched_rt_avg_update(rq, irq_delta);
}
-#else
+#else /* CONFIG_IRQ_TIME_ACCOUNTING */
-static u64 irq_time_cpu(int cpu)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
{
- return 0;
+ rq->clock_task += delta;
}
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time) { }
-
-#endif
+#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
#include "sched_idletask.c"
#include "sched_fair.c"
@@ -2129,7 +2186,7 @@
* A queue event has occurred, and we're going to schedule. In
* this case, we can save a useless back to back clock update.
*/
- if (test_tsk_need_resched(rq->curr))
+ if (rq->curr->se.on_rq && test_tsk_need_resched(rq->curr))
rq->skip_clock_update = 1;
}
@@ -3119,6 +3176,15 @@
return delta;
}
+static unsigned long
+calc_load(unsigned long load, unsigned long exp, unsigned long active)
+{
+ load *= exp;
+ load += active * (FIXED_1 - exp);
+ load += 1UL << (FSHIFT - 1);
+ return load >> FSHIFT;
+}
+
#ifdef CONFIG_NO_HZ
/*
* For NO_HZ we delay the active fold to the next LOAD_FREQ update.
@@ -3148,6 +3214,128 @@
return delta;
}
+
+/**
+ * fixed_power_int - compute: x^n, in O(log n) time
+ *
+ * @x: base of the power
+ * @frac_bits: fractional bits of @x
+ * @n: power to raise @x to.
+ *
+ * By exploiting the relation between the definition of the natural power
+ * function: x^n := x*x*...*x (x multiplied by itself for n times), and
+ * the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
+ * (where: n_i \elem {0, 1}, the binary vector representing n),
+ * we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
+ * of course trivially computable in O(log_2 n), the length of our binary
+ * vector.
+ */
+static unsigned long
+fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
+{
+ unsigned long result = 1UL << frac_bits;
+
+ if (n) for (;;) {
+ if (n & 1) {
+ result *= x;
+ result += 1UL << (frac_bits - 1);
+ result >>= frac_bits;
+ }
+ n >>= 1;
+ if (!n)
+ break;
+ x *= x;
+ x += 1UL << (frac_bits - 1);
+ x >>= frac_bits;
+ }
+
+ return result;
+}
+
+/*
+ * a1 = a0 * e + a * (1 - e)
+ *
+ * a2 = a1 * e + a * (1 - e)
+ * = (a0 * e + a * (1 - e)) * e + a * (1 - e)
+ * = a0 * e^2 + a * (1 - e) * (1 + e)
+ *
+ * a3 = a2 * e + a * (1 - e)
+ * = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
+ * = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
+ *
+ * ...
+ *
+ * an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
+ * = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
+ * = a0 * e^n + a * (1 - e^n)
+ *
+ * [1] application of the geometric series:
+ *
+ * n 1 - x^(n+1)
+ * S_n := \Sum x^i = -------------
+ * i=0 1 - x
+ */
+static unsigned long
+calc_load_n(unsigned long load, unsigned long exp,
+ unsigned long active, unsigned int n)
+{
+
+ return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
+}
+
+/*
+ * NO_HZ can leave us missing all per-cpu ticks calling
+ * calc_load_account_active(), but since an idle CPU folds its delta into
+ * calc_load_tasks_idle per calc_load_account_idle(), all we need to do is fold
+ * in the pending idle delta if our idle period crossed a load cycle boundary.
+ *
+ * Once we've updated the global active value, we need to apply the exponential
+ * weights adjusted to the number of cycles missed.
+ */
+static void calc_global_nohz(unsigned long ticks)
+{
+ long delta, active, n;
+
+ if (time_before(jiffies, calc_load_update))
+ return;
+
+ /*
+ * If we crossed a calc_load_update boundary, make sure to fold
+ * any pending idle changes, the respective CPUs might have
+ * missed the tick driven calc_load_account_active() update
+ * due to NO_HZ.
+ */
+ delta = calc_load_fold_idle();
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
+
+ /*
+ * If we were idle for multiple load cycles, apply them.
+ */
+ if (ticks >= LOAD_FREQ) {
+ n = ticks / LOAD_FREQ;
+
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
+
+ avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+ avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+ avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+
+ calc_load_update += n * LOAD_FREQ;
+ }
+
+ /*
+ * Its possible the remainder of the above division also crosses
+ * a LOAD_FREQ period, the regular check in calc_global_load()
+ * which comes after this will take care of that.
+ *
+ * Consider us being 11 ticks before a cycle completion, and us
+ * sleeping for 4*LOAD_FREQ + 22 ticks, then the above code will
+ * age us 4 cycles, and the test in calc_global_load() will
+ * pick up the final one.
+ */
+}
#else
static void calc_load_account_idle(struct rq *this_rq)
{
@@ -3157,6 +3345,10 @@
{
return 0;
}
+
+static void calc_global_nohz(unsigned long ticks)
+{
+}
#endif
/**
@@ -3174,24 +3366,17 @@
loads[2] = (avenrun[2] + offset) << shift;
}
-static unsigned long
-calc_load(unsigned long load, unsigned long exp, unsigned long active)
-{
- load *= exp;
- load += active * (FIXED_1 - exp);
- return load >> FSHIFT;
-}
-
/*
* calc_load - update the avenrun load estimates 10 ticks after the
* CPUs have updated calc_load_tasks.
*/
-void calc_global_load(void)
+void calc_global_load(unsigned long ticks)
{
- unsigned long upd = calc_load_update + 10;
long active;
- if (time_before(jiffies, upd))
+ calc_global_nohz(ticks);
+
+ if (time_before(jiffies, calc_load_update + 10))
return;
active = atomic_long_read(&calc_load_tasks);
@@ -3845,7 +4030,6 @@
{
if (prev->se.on_rq)
update_rq_clock(rq);
- rq->skip_clock_update = 0;
prev->sched_class->put_prev_task(rq, prev);
}
@@ -3903,7 +4087,6 @@
hrtick_clear(rq);
raw_spin_lock_irq(&rq->lock);
- clear_tsk_need_resched(prev);
switch_count = &prev->nivcsw;
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
@@ -3935,6 +4118,8 @@
put_prev_task(rq, prev);
next = pick_next_task(rq);
+ clear_tsk_need_resched(prev);
+ rq->skip_clock_update = 0;
if (likely(prev != next)) {
sched_info_switch(prev, next);
diff --git a/kernel/timer.c b/kernel/timer.c
index 68a9ae7..353b922 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1252,6 +1252,12 @@
struct tvec_base *base = __get_cpu_var(tvec_bases);
unsigned long expires;
+ /*
+ * Pretend that there is no timer pending if the cpu is offline.
+ * Possible pending timers will be migrated later to an active cpu.
+ */
+ if (cpu_is_offline(smp_processor_id()))
+ return now + NEXT_TIMER_MAX_DELTA;
spin_lock(&base->lock);
if (time_before_eq(base->next_timer, base->timer_jiffies))
base->next_timer = __next_timer_interrupt(base);
@@ -1319,7 +1325,7 @@
{
jiffies_64 += ticks;
update_wall_time();
- calc_global_load();
+ calc_global_load(ticks);
}
#ifdef __ARCH_WANT_SYS_ALARM
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index c38061227..f8cf959 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2338,11 +2338,19 @@
return count;
}
+static loff_t tracing_seek(struct file *file, loff_t offset, int origin)
+{
+ if (file->f_mode & FMODE_READ)
+ return seq_lseek(file, offset, origin);
+ else
+ return 0;
+}
+
static const struct file_operations tracing_fops = {
.open = tracing_open,
.read = seq_read,
.write = tracing_write_stub,
- .llseek = seq_lseek,
+ .llseek = tracing_seek,
.release = tracing_release,
};
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 1c7a2ec..b6ff4a1 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -97,11 +97,9 @@
int ceph_msgr_init(void)
{
ceph_msgr_wq = create_workqueue("ceph-msgr");
- if (IS_ERR(ceph_msgr_wq)) {
- int ret = PTR_ERR(ceph_msgr_wq);
- pr_err("msgr_init failed to create workqueue: %d\n", ret);
- ceph_msgr_wq = NULL;
- return ret;
+ if (!ceph_msgr_wq) {
+ pr_err("msgr_init failed to create workqueue\n");
+ return -ENOMEM;
}
return 0;
}
diff --git a/net/ceph/pagevec.c b/net/ceph/pagevec.c
index ac34fee..1a040e6 100644
--- a/net/ceph/pagevec.c
+++ b/net/ceph/pagevec.c
@@ -13,7 +13,7 @@
* build a vector of user pages
*/
struct page **ceph_get_direct_page_vector(const char __user *data,
- int num_pages)
+ int num_pages, bool write_page)
{
struct page **pages;
int rc;
@@ -24,24 +24,27 @@
down_read(¤t->mm->mmap_sem);
rc = get_user_pages(current, current->mm, (unsigned long)data,
- num_pages, 0, 0, pages, NULL);
+ num_pages, write_page, 0, pages, NULL);
up_read(¤t->mm->mmap_sem);
- if (rc < 0)
+ if (rc < num_pages)
goto fail;
return pages;
fail:
- kfree(pages);
+ ceph_put_page_vector(pages, rc > 0 ? rc : 0, false);
return ERR_PTR(rc);
}
EXPORT_SYMBOL(ceph_get_direct_page_vector);
-void ceph_put_page_vector(struct page **pages, int num_pages)
+void ceph_put_page_vector(struct page **pages, int num_pages, bool dirty)
{
int i;
- for (i = 0; i < num_pages; i++)
+ for (i = 0; i < num_pages; i++) {
+ if (dirty)
+ set_page_dirty_lock(pages[i]);
put_page(pages[i]);
+ }
kfree(pages);
}
EXPORT_SYMBOL(ceph_put_page_vector);
diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index 58e933a..3966717 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -119,7 +119,7 @@
static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type)
{
- rp->r_info = ELF_R_INFO(sym, type);
+ rp->r_info = _w(ELF_R_INFO(sym, type));
}
static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO;
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 8509bb5..bbbe584 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -125,7 +125,9 @@
-I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
--extra=+f --c-kinds=-px \
--regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
- --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
+ --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \
+ --regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/' \
+ --regex-c++='/^DEFINE_EVENT\(([^,)]*).*/trace_\1/'
all_kconfigs | xargs $1 -a \
--langdef=kconfig --language-force=kconfig \
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 2d7d7de..427da45 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10830,7 +10830,8 @@
{
struct alc_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
- int i, err;
+ int i, err, type;
+ int type_idx = 0;
hda_nid_t nid;
for (i = 0; i < cfg->num_inputs; i++) {
@@ -10839,9 +10840,15 @@
nid = cfg->inputs[i].pin;
if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP) {
char label[32];
+ type = cfg->inputs[i].type;
+ if (i > 0 && type == cfg->inputs[i - 1].type)
+ type_idx++;
+ else
+ type_idx = 0;
snprintf(label, sizeof(label), "%s Boost",
hda_get_autocfg_input_label(codec, cfg, i));
- err = add_control(spec, ALC_CTL_WIDGET_VOL, label, 0,
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, label,
+ type_idx,
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
if (err < 0)
return err;
@@ -14800,6 +14807,8 @@
enum {
ALC269_FIXUP_SONY_VAIO,
ALC269_FIXUP_DELL_M101Z,
+ ALC269_FIXUP_LENOVO_EDGE14,
+ ALC269_FIXUP_ASUS_G73JW,
};
static const struct alc_fixup alc269_fixups[] = {
@@ -14817,11 +14826,22 @@
{}
}
},
+ [ALC269_FIXUP_LENOVO_EDGE14] = {
+ .sku = ALC_FIXUP_SKU_IGNORE,
+ },
+ [ALC269_FIXUP_ASUS_G73JW] = {
+ .pins = (const struct alc_pincfg[]) {
+ { 0x17, 0x99130111 }, /* subwoofer */
+ { }
+ }
+ },
};
static struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+ SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_LENOVO_EDGE14),
+ SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
{}
};
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 879dff2..8725d4e 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -161,7 +161,7 @@
static const u16 wm8580_reg[] = {
0x0121, 0x017e, 0x007d, 0x0014, /*R3*/
0x0121, 0x017e, 0x007d, 0x0194, /*R7*/
- 0x001c, 0x0002, 0x0002, 0x00c2, /*R11*/
+ 0x0010, 0x0002, 0x0002, 0x00c2, /*R11*/
0x0182, 0x0082, 0x000a, 0x0024, /*R15*/
0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/
0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index fca60a0..9001cc4 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -818,7 +818,8 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
- return wm8904->deemph;
+ ucontrol->value.enumerated.item[0] = wm8904->deemph;
+ return 0;
}
static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index f89ad6c..9cbab8e 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -380,7 +380,8 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
- return wm8955->deemph;
+ ucontrol->value.enumerated.item[0] = wm8955->deemph;
+ return 0;
}
static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 8d5efb3..21986c4 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -138,7 +138,8 @@
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- return wm8960->deemph;
+ ucontrol->value.enumerated.item[0] = wm8960->deemph;
+ return 0;
}
static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 75ed649..c721502 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -944,6 +944,9 @@
case SND_SOC_DAPM_STREAM_RESUME:
sys_power = 1;
break;
+ case SND_SOC_DAPM_STREAM_STOP:
+ sys_power = !!codec->active;
+ break;
case SND_SOC_DAPM_STREAM_SUSPEND:
sys_power = 0;
break;