| /* |
| * |
| * Digianswer Bluetooth USB driver |
| * |
| * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/skbuff.h> |
| |
| #include <linux/usb.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "hci_uart.h" |
| |
| #define VERSION "0.11" |
| |
| static const struct usb_device_id bpa10x_table[] = { |
| /* Tektronix BPA 100/105 (Digianswer) */ |
| { USB_DEVICE(0x08fd, 0x0002) }, |
| |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, bpa10x_table); |
| |
| struct bpa10x_data { |
| struct hci_dev *hdev; |
| struct usb_device *udev; |
| |
| struct usb_anchor tx_anchor; |
| struct usb_anchor rx_anchor; |
| |
| struct sk_buff *rx_skb[2]; |
| }; |
| |
| static void bpa10x_tx_complete(struct urb *urb) |
| { |
| struct sk_buff *skb = urb->context; |
| struct hci_dev *hdev = (struct hci_dev *) skb->dev; |
| |
| BT_DBG("%s urb %p status %d count %d", hdev->name, |
| urb, urb->status, urb->actual_length); |
| |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) |
| goto done; |
| |
| if (!urb->status) |
| hdev->stat.byte_tx += urb->transfer_buffer_length; |
| else |
| hdev->stat.err_tx++; |
| |
| done: |
| kfree(urb->setup_packet); |
| |
| kfree_skb(skb); |
| } |
| |
| #define HCI_VENDOR_HDR_SIZE 5 |
| |
| #define HCI_RECV_VENDOR \ |
| .type = HCI_VENDOR_PKT, \ |
| .hlen = HCI_VENDOR_HDR_SIZE, \ |
| .loff = 3, \ |
| .lsize = 2, \ |
| .maxlen = HCI_MAX_FRAME_SIZE |
| |
| static const struct h4_recv_pkt bpa10x_recv_pkts[] = { |
| { H4_RECV_ACL, .recv = hci_recv_frame }, |
| { H4_RECV_SCO, .recv = hci_recv_frame }, |
| { H4_RECV_EVENT, .recv = hci_recv_frame }, |
| { HCI_RECV_VENDOR, .recv = hci_recv_diag }, |
| }; |
| |
| static void bpa10x_rx_complete(struct urb *urb) |
| { |
| struct hci_dev *hdev = urb->context; |
| struct bpa10x_data *data = hci_get_drvdata(hdev); |
| int err; |
| |
| BT_DBG("%s urb %p status %d count %d", hdev->name, |
| urb, urb->status, urb->actual_length); |
| |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) |
| return; |
| |
| if (urb->status == 0) { |
| bool idx = usb_pipebulk(urb->pipe); |
| |
| data->rx_skb[idx] = h4_recv_buf(hdev, data->rx_skb[idx], |
| urb->transfer_buffer, |
| urb->actual_length, |
| bpa10x_recv_pkts, |
| ARRAY_SIZE(bpa10x_recv_pkts)); |
| if (IS_ERR(data->rx_skb[idx])) { |
| BT_ERR("%s corrupted event packet", hdev->name); |
| hdev->stat.err_rx++; |
| data->rx_skb[idx] = NULL; |
| } |
| } |
| |
| usb_anchor_urb(urb, &data->rx_anchor); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err < 0) { |
| BT_ERR("%s urb %p failed to resubmit (%d)", |
| hdev->name, urb, -err); |
| usb_unanchor_urb(urb); |
| } |
| } |
| |
| static inline int bpa10x_submit_intr_urb(struct hci_dev *hdev) |
| { |
| struct bpa10x_data *data = hci_get_drvdata(hdev); |
| struct urb *urb; |
| unsigned char *buf; |
| unsigned int pipe; |
| int err, size = 16; |
| |
| BT_DBG("%s", hdev->name); |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| return -ENOMEM; |
| |
| buf = kmalloc(size, GFP_KERNEL); |
| if (!buf) { |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_rcvintpipe(data->udev, 0x81); |
| |
| usb_fill_int_urb(urb, data->udev, pipe, buf, size, |
| bpa10x_rx_complete, hdev, 1); |
| |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| usb_anchor_urb(urb, &data->rx_anchor); |
| |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err < 0) { |
| BT_ERR("%s urb %p submission failed (%d)", |
| hdev->name, urb, -err); |
| usb_unanchor_urb(urb); |
| } |
| |
| usb_free_urb(urb); |
| |
| return err; |
| } |
| |
| static inline int bpa10x_submit_bulk_urb(struct hci_dev *hdev) |
| { |
| struct bpa10x_data *data = hci_get_drvdata(hdev); |
| struct urb *urb; |
| unsigned char *buf; |
| unsigned int pipe; |
| int err, size = 64; |
| |
| BT_DBG("%s", hdev->name); |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| return -ENOMEM; |
| |
| buf = kmalloc(size, GFP_KERNEL); |
| if (!buf) { |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| pipe = usb_rcvbulkpipe(data->udev, 0x82); |
| |
| usb_fill_bulk_urb(urb, data->udev, pipe, |
| buf, size, bpa10x_rx_complete, hdev); |
| |
| urb->transfer_flags |= URB_FREE_BUFFER; |
| |
| usb_anchor_urb(urb, &data->rx_anchor); |
| |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err < 0) { |
| BT_ERR("%s urb %p submission failed (%d)", |
| hdev->name, urb, -err); |
| usb_unanchor_urb(urb); |
| } |
| |
| usb_free_urb(urb); |
| |
| return err; |
| } |
| |
| static int bpa10x_open(struct hci_dev *hdev) |
| { |
| struct bpa10x_data *data = hci_get_drvdata(hdev); |
| int err; |
| |
| BT_DBG("%s", hdev->name); |
| |
| err = bpa10x_submit_intr_urb(hdev); |
| if (err < 0) |
| goto error; |
| |
| err = bpa10x_submit_bulk_urb(hdev); |
| if (err < 0) |
| goto error; |
| |
| return 0; |
| |
| error: |
| usb_kill_anchored_urbs(&data->rx_anchor); |
| |
| return err; |
| } |
| |
| static int bpa10x_close(struct hci_dev *hdev) |
| { |
| struct bpa10x_data *data = hci_get_drvdata(hdev); |
| |
| BT_DBG("%s", hdev->name); |
| |
| usb_kill_anchored_urbs(&data->rx_anchor); |
| |
| return 0; |
| } |
| |
| static int bpa10x_flush(struct hci_dev *hdev) |
| { |
| struct bpa10x_data *data = hci_get_drvdata(hdev); |
| |
| BT_DBG("%s", hdev->name); |
| |
| usb_kill_anchored_urbs(&data->tx_anchor); |
| |
| return 0; |
| } |
| |
| static int bpa10x_setup(struct hci_dev *hdev) |
| { |
| const u8 req[] = { 0x07 }; |
| struct sk_buff *skb; |
| |
| BT_DBG("%s", hdev->name); |
| |
| /* Read revision string */ |
| skb = __hci_cmd_sync(hdev, 0xfc0e, sizeof(req), req, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| BT_INFO("%s: %s", hdev->name, (char *)(skb->data + 1)); |
| |
| hci_set_fw_info(hdev, "%s", skb->data + 1); |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int bpa10x_send_frame(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct bpa10x_data *data = hci_get_drvdata(hdev); |
| struct usb_ctrlrequest *dr; |
| struct urb *urb; |
| unsigned int pipe; |
| int err; |
| |
| BT_DBG("%s", hdev->name); |
| |
| skb->dev = (void *) hdev; |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) |
| return -ENOMEM; |
| |
| /* Prepend skb with frame type */ |
| *skb_push(skb, 1) = hci_skb_pkt_type(skb); |
| |
| switch (hci_skb_pkt_type(skb)) { |
| case HCI_COMMAND_PKT: |
| dr = kmalloc(sizeof(*dr), GFP_ATOMIC); |
| if (!dr) { |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| dr->bRequestType = USB_TYPE_VENDOR; |
| dr->bRequest = 0; |
| dr->wIndex = 0; |
| dr->wValue = 0; |
| dr->wLength = __cpu_to_le16(skb->len); |
| |
| pipe = usb_sndctrlpipe(data->udev, 0x00); |
| |
| usb_fill_control_urb(urb, data->udev, pipe, (void *) dr, |
| skb->data, skb->len, bpa10x_tx_complete, skb); |
| |
| hdev->stat.cmd_tx++; |
| break; |
| |
| case HCI_ACLDATA_PKT: |
| pipe = usb_sndbulkpipe(data->udev, 0x02); |
| |
| usb_fill_bulk_urb(urb, data->udev, pipe, |
| skb->data, skb->len, bpa10x_tx_complete, skb); |
| |
| hdev->stat.acl_tx++; |
| break; |
| |
| case HCI_SCODATA_PKT: |
| pipe = usb_sndbulkpipe(data->udev, 0x02); |
| |
| usb_fill_bulk_urb(urb, data->udev, pipe, |
| skb->data, skb->len, bpa10x_tx_complete, skb); |
| |
| hdev->stat.sco_tx++; |
| break; |
| |
| default: |
| usb_free_urb(urb); |
| return -EILSEQ; |
| } |
| |
| usb_anchor_urb(urb, &data->tx_anchor); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err < 0) { |
| BT_ERR("%s urb %p submission failed", hdev->name, urb); |
| kfree(urb->setup_packet); |
| usb_unanchor_urb(urb); |
| } |
| |
| usb_free_urb(urb); |
| |
| return 0; |
| } |
| |
| static int bpa10x_set_diag(struct hci_dev *hdev, bool enable) |
| { |
| const u8 req[] = { 0x00, enable }; |
| struct sk_buff *skb; |
| |
| BT_DBG("%s", hdev->name); |
| |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) |
| return -ENETDOWN; |
| |
| /* Enable sniffer operation */ |
| skb = __hci_cmd_sync(hdev, 0xfc0e, sizeof(req), req, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| struct bpa10x_data *data; |
| struct hci_dev *hdev; |
| int err; |
| |
| BT_DBG("intf %p id %p", intf, id); |
| |
| if (intf->cur_altsetting->desc.bInterfaceNumber != 0) |
| return -ENODEV; |
| |
| data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->udev = interface_to_usbdev(intf); |
| |
| init_usb_anchor(&data->tx_anchor); |
| init_usb_anchor(&data->rx_anchor); |
| |
| hdev = hci_alloc_dev(); |
| if (!hdev) |
| return -ENOMEM; |
| |
| hdev->bus = HCI_USB; |
| hci_set_drvdata(hdev, data); |
| |
| data->hdev = hdev; |
| |
| SET_HCIDEV_DEV(hdev, &intf->dev); |
| |
| hdev->open = bpa10x_open; |
| hdev->close = bpa10x_close; |
| hdev->flush = bpa10x_flush; |
| hdev->setup = bpa10x_setup; |
| hdev->send = bpa10x_send_frame; |
| hdev->set_diag = bpa10x_set_diag; |
| |
| set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); |
| |
| err = hci_register_dev(hdev); |
| if (err < 0) { |
| hci_free_dev(hdev); |
| return err; |
| } |
| |
| usb_set_intfdata(intf, data); |
| |
| return 0; |
| } |
| |
| static void bpa10x_disconnect(struct usb_interface *intf) |
| { |
| struct bpa10x_data *data = usb_get_intfdata(intf); |
| |
| BT_DBG("intf %p", intf); |
| |
| if (!data) |
| return; |
| |
| usb_set_intfdata(intf, NULL); |
| |
| hci_unregister_dev(data->hdev); |
| |
| hci_free_dev(data->hdev); |
| kfree_skb(data->rx_skb[0]); |
| kfree_skb(data->rx_skb[1]); |
| } |
| |
| static struct usb_driver bpa10x_driver = { |
| .name = "bpa10x", |
| .probe = bpa10x_probe, |
| .disconnect = bpa10x_disconnect, |
| .id_table = bpa10x_table, |
| .disable_hub_initiated_lpm = 1, |
| }; |
| |
| module_usb_driver(bpa10x_driver); |
| |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); |
| MODULE_DESCRIPTION("Digianswer Bluetooth USB driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |