[PATCH] ahci: implement Power Management support
Implement power management support.
Original implementation is from Zhao, Forrest <forrest.zhao@intel.com>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Zhao, Forrest <forrest.zhao@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index a9e0c5f..909a4dc 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -215,6 +215,10 @@
static void ahci_thaw(struct ata_port *ap);
static void ahci_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
+static int ahci_port_resume(struct ata_port *ap);
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int ahci_pci_device_resume(struct pci_dev *pdev);
static void ahci_remove_one (struct pci_dev *pdev);
static struct scsi_host_template ahci_sht = {
@@ -234,6 +238,8 @@
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .suspend = ata_scsi_device_suspend,
+ .resume = ata_scsi_device_resume,
};
static const struct ata_port_operations ahci_ops = {
@@ -260,6 +266,9 @@
.error_handler = ahci_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
+ .port_suspend = ahci_port_suspend,
+ .port_resume = ahci_port_resume,
+
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
@@ -361,6 +370,8 @@
.name = DRV_NAME,
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
+ .suspend = ahci_pci_device_suspend,
+ .resume = ahci_pci_device_resume,
.remove = ahci_remove_one,
};
@@ -1199,6 +1210,79 @@
}
}
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
+{
+ struct ahci_host_priv *hpriv = ap->host_set->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+ const char *emsg = NULL;
+ int rc;
+
+ rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+ if (rc) {
+ ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
+ ahci_init_port(port_mmio, hpriv->cap,
+ pp->cmd_slot_dma, pp->rx_fis_dma);
+ }
+
+ return rc;
+}
+
+static int ahci_port_resume(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host_set->private_data;
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+
+ ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
+
+ return 0;
+}
+
+static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+ void __iomem *mmio = host_set->mmio_base;
+ u32 ctl;
+
+ if (mesg.event == PM_EVENT_SUSPEND) {
+ /* AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ return ata_pci_device_suspend(pdev, mesg);
+}
+
+static int ahci_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host_set->private_data;
+ void __iomem *mmio = host_set->mmio_base;
+ int rc;
+
+ ata_pci_device_do_resume(pdev);
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(mmio, pdev);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(mmio, pdev, host_set->n_ports, hpriv->cap);
+ }
+
+ ata_host_set_resume(host_set);
+
+ return 0;
+}
+
static int ahci_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;