m68knomu: remove dead config symbols from m68knomu code
remove dead config symbols from m68knommu code
Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 332345d..81507c5 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -64,9 +64,6 @@
#ifdef CONFIG_M68VZ328
#define CPU "MC68VZ328"
#endif
-#ifdef CONFIG_M68332
- #define CPU "MC68332"
-#endif
#ifdef CONFIG_M68360
#define CPU "MC68360"
#endif
diff --git a/include/asm-m68knommu/mcfne.h b/include/asm-m68knommu/mcfne.h
index c920ccd..431f63a 100644
--- a/include/asm-m68knommu/mcfne.h
+++ b/include/asm-m68knommu/mcfne.h
@@ -60,17 +60,6 @@
#define NE2000_BYTE volatile unsigned char
#endif
-#if defined(CONFIG_CFV240)
-#define NE2000_ADDR 0x40010000
-#define NE2000_ADDR1 0x40010001
-#define NE2000_ODDOFFSET 0x00000000
-#define NE2000_IRQ 1
-#define NE2000_IRQ_VECTOR 0x19
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 1
-#define NE2000_BYTE volatile unsigned char
-#endif
-
#if defined(CONFIG_M5307C3)
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
@@ -173,13 +162,8 @@
* On most NE2000 implementations on ColdFire boards the chip is
* mapped in kinda funny, due to its ISA heritage.
*/
-#ifdef CONFIG_CFV240
-#define NE2000_PTR(addr) (NE2000_ADDR + ((addr & 0x3f) << 1) + 1)
-#define NE2000_DATA_PTR(addr) (NE2000_ADDR + ((addr & 0x3f) << 1))
-#else
#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
#define NE2000_DATA_PTR(addr) (addr)
-#endif
void ne2000_outb(unsigned int val, unsigned int addr)
@@ -285,17 +269,6 @@
}
#endif
-#if defined(CONFIG_CFV240)
-void ne2000_irqsetup(int irq)
-{
- volatile unsigned char *icrp;
-
- icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = MCFSIM_ICR_LEVEL1 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
- mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT1);
-}
-#endif
-
#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
void ne2000_irqsetup(int irq)
{
diff --git a/include/asm-m68knommu/mcfsim.h b/include/asm-m68knommu/mcfsim.h
index 1074ae7..da3f2ce 100644
--- a/include/asm-m68knommu/mcfsim.h
+++ b/include/asm-m68knommu/mcfsim.h
@@ -17,9 +17,7 @@
* Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
* 5307 or 5407 specific addresses.
*/
-#if defined(CONFIG_M5204)
-#include <asm/m5204sim.h>
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#include <asm/m5206sim.h>
#elif defined(CONFIG_M520x)
#include <asm/m520xsim.h>
diff --git a/include/asm-m68knommu/mcftimer.h b/include/asm-m68knommu/mcftimer.h
index 6f4d796..0f90f6d 100644
--- a/include/asm-m68knommu/mcftimer.h
+++ b/include/asm-m68knommu/mcftimer.h
@@ -16,7 +16,7 @@
/*
* Get address specific defines for this ColdFire member.
*/
-#if defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */
#elif defined(CONFIG_M5272)
diff --git a/include/asm-m68knommu/mcfuart.h b/include/asm-m68knommu/mcfuart.h
index 8a7a677..ef22938 100644
--- a/include/asm-m68knommu/mcfuart.h
+++ b/include/asm-m68knommu/mcfuart.h
@@ -19,7 +19,7 @@
#if defined(CONFIG_M5272)
#define MCFUART_BASE1 0x100 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
-#elif defined(CONFIG_M5204) || defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#if defined(CONFIG_NETtel)
#define MCFUART_BASE1 0x180 /* Base address of UART1 */
#define MCFUART_BASE2 0x140 /* Base address of UART2 */
diff --git a/include/asm-m68knommu/system.h b/include/asm-m68knommu/system.h
index 15b4c7d..ee2dc07 100644
--- a/include/asm-m68knommu/system.h
+++ b/include/asm-m68knommu/system.h
@@ -207,23 +207,6 @@
}
-#ifdef CONFIG_M68332
-#define HARD_RESET_NOW() ({ \
- local_irq_disable(); \
- asm(" \
- movew #0x0000, 0xfffa6a; \
- reset; \
- /*movew #0x1557, 0xfffa44;*/ \
- /*movew #0x0155, 0xfffa46;*/ \
- moveal #0, %a0; \
- movec %a0, %vbr; \
- moveal 0, %sp; \
- moveal 4, %a0; \
- jmp (%a0); \
- "); \
-})
-#endif
-
#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
#define HARD_RESET_NOW() ({ \