| /* |
| * AimsLab RadioTrack (aka RadioVeveal) driver |
| * |
| * Copyright 1997 M. Kirkwood |
| * |
| * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com> |
| * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> |
| * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> |
| * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> |
| * |
| * Notes on the hardware (reverse engineered from other peoples' |
| * reverse engineering of AIMS' code :-) |
| * |
| * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); |
| * |
| * The signal strength query is unsurprisingly inaccurate. And it seems |
| * to indicate that (on my card, at least) the frequency setting isn't |
| * too great. (I have to tune up .025MHz from what the freq should be |
| * to get a report that the thing is tuned.) |
| * |
| * Volume control is (ugh) analogue: |
| * out(port, start_increasing_volume); |
| * wait(a_wee_while); |
| * out(port, stop_changing_the_volume); |
| * |
| * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. |
| */ |
| |
| #include <linux/module.h> /* Modules */ |
| #include <linux/init.h> /* Initdata */ |
| #include <linux/ioport.h> /* request_region */ |
| #include <linux/delay.h> /* msleep */ |
| #include <linux/videodev2.h> /* kernel radio structs */ |
| #include <linux/io.h> /* outb, outb_p */ |
| #include <linux/slab.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/v4l2-ctrls.h> |
| #include "radio-isa.h" |
| #include "lm7000.h" |
| |
| MODULE_AUTHOR("M. Kirkwood"); |
| MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card."); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION("1.0.0"); |
| |
| #ifndef CONFIG_RADIO_RTRACK_PORT |
| #define CONFIG_RADIO_RTRACK_PORT -1 |
| #endif |
| |
| #define RTRACK_MAX 2 |
| |
| static int io[RTRACK_MAX] = { [0] = CONFIG_RADIO_RTRACK_PORT, |
| [1 ... (RTRACK_MAX - 1)] = -1 }; |
| static int radio_nr[RTRACK_MAX] = { [0 ... (RTRACK_MAX - 1)] = -1 }; |
| |
| module_param_array(io, int, NULL, 0444); |
| MODULE_PARM_DESC(io, "I/O addresses of the RadioTrack card (0x20f or 0x30f)"); |
| module_param_array(radio_nr, int, NULL, 0444); |
| MODULE_PARM_DESC(radio_nr, "Radio device numbers"); |
| |
| struct rtrack { |
| struct radio_isa_card isa; |
| int curvol; |
| }; |
| |
| static struct radio_isa_card *rtrack_alloc(void) |
| { |
| struct rtrack *rt = kzalloc(sizeof(struct rtrack), GFP_KERNEL); |
| |
| if (rt) |
| rt->curvol = 0xff; |
| return rt ? &rt->isa : NULL; |
| } |
| |
| #define AIMS_BIT_TUN_CE (1 << 0) |
| #define AIMS_BIT_TUN_CLK (1 << 1) |
| #define AIMS_BIT_TUN_DATA (1 << 2) |
| #define AIMS_BIT_VOL_CE (1 << 3) |
| #define AIMS_BIT_TUN_STRQ (1 << 4) |
| /* bit 5 is not connected */ |
| #define AIMS_BIT_VOL_UP (1 << 6) /* active low */ |
| #define AIMS_BIT_VOL_DN (1 << 7) /* active low */ |
| |
| static void rtrack_set_pins(void *handle, u8 pins) |
| { |
| struct radio_isa_card *isa = handle; |
| struct rtrack *rt = container_of(isa, struct rtrack, isa); |
| u8 bits = AIMS_BIT_VOL_DN | AIMS_BIT_VOL_UP | AIMS_BIT_TUN_STRQ; |
| |
| if (!v4l2_ctrl_g_ctrl(rt->isa.mute)) |
| bits |= AIMS_BIT_VOL_CE; |
| |
| if (pins & LM7000_DATA) |
| bits |= AIMS_BIT_TUN_DATA; |
| if (pins & LM7000_CLK) |
| bits |= AIMS_BIT_TUN_CLK; |
| if (pins & LM7000_CE) |
| bits |= AIMS_BIT_TUN_CE; |
| |
| outb_p(bits, rt->isa.io); |
| } |
| |
| static int rtrack_s_frequency(struct radio_isa_card *isa, u32 freq) |
| { |
| lm7000_set_freq(freq, isa, rtrack_set_pins); |
| |
| return 0; |
| } |
| |
| static u32 rtrack_g_signal(struct radio_isa_card *isa) |
| { |
| /* bit set = no signal present */ |
| return 0xffff * !(inb(isa->io) & 2); |
| } |
| |
| static int rtrack_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) |
| { |
| struct rtrack *rt = container_of(isa, struct rtrack, isa); |
| int curvol = rt->curvol; |
| |
| if (mute) { |
| outb(0xd0, isa->io); /* volume steady + sigstr + off */ |
| return 0; |
| } |
| if (vol == 0) { /* volume = 0 means mute the card */ |
| outb(0x48, isa->io); /* volume down but still "on" */ |
| msleep(curvol * 3); /* make sure it's totally down */ |
| } else if (curvol < vol) { |
| outb(0x98, isa->io); /* volume up + sigstr + on */ |
| for (; curvol < vol; curvol++) |
| mdelay(3); |
| } else if (curvol > vol) { |
| outb(0x58, isa->io); /* volume down + sigstr + on */ |
| for (; curvol > vol; curvol--) |
| mdelay(3); |
| } |
| outb(0xd8, isa->io); /* volume steady + sigstr + on */ |
| rt->curvol = vol; |
| return 0; |
| } |
| |
| /* Mute card - prevents noisy bootups */ |
| static int rtrack_initialize(struct radio_isa_card *isa) |
| { |
| /* this ensures that the volume is all the way up */ |
| outb(0x90, isa->io); /* volume up but still "on" */ |
| msleep(3000); /* make sure it's totally up */ |
| outb(0xc0, isa->io); /* steady volume, mute card */ |
| return 0; |
| } |
| |
| static const struct radio_isa_ops rtrack_ops = { |
| .alloc = rtrack_alloc, |
| .init = rtrack_initialize, |
| .s_mute_volume = rtrack_s_mute_volume, |
| .s_frequency = rtrack_s_frequency, |
| .g_signal = rtrack_g_signal, |
| }; |
| |
| static const int rtrack_ioports[] = { 0x20f, 0x30f }; |
| |
| static struct radio_isa_driver rtrack_driver = { |
| .driver = { |
| .match = radio_isa_match, |
| .probe = radio_isa_probe, |
| .remove = radio_isa_remove, |
| .driver = { |
| .name = "radio-aimslab", |
| }, |
| }, |
| .io_params = io, |
| .radio_nr_params = radio_nr, |
| .io_ports = rtrack_ioports, |
| .num_of_io_ports = ARRAY_SIZE(rtrack_ioports), |
| .region_size = 2, |
| .card = "AIMSlab RadioTrack/RadioReveal", |
| .ops = &rtrack_ops, |
| .has_stereo = true, |
| .max_volume = 0xff, |
| }; |
| |
| static int __init rtrack_init(void) |
| { |
| return isa_register_driver(&rtrack_driver.driver, RTRACK_MAX); |
| } |
| |
| static void __exit rtrack_exit(void) |
| { |
| isa_unregister_driver(&rtrack_driver.driver); |
| } |
| |
| module_init(rtrack_init); |
| module_exit(rtrack_exit); |