parport->dev driver model support
Currently a parport_driver can't get a handle on the device node for the
underlying parport (PNPACPI, PCI, etc). That prevents correct placement of
sysfs child nodes, which can affect things like power management.
This patch adds a field to "struct parport" pointing to that device node, and
updates non-legacy port drivers to initialize that device pointer. That field
replaces the analagous PCI-only support in parport_pc.
[akpm@linux-foundation.org: fix powerpc build]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 3de2623..c3240a6 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -620,6 +620,7 @@
unsigned long dmaflag;
size_t left = length;
const struct parport_pc_private *priv = port->physport->private_data;
+ struct device *dev = port->physport->dev;
dma_addr_t dma_addr, dma_handle;
size_t maxlen = 0x10000; /* max 64k per DMA transfer */
unsigned long start = (unsigned long) buf;
@@ -631,8 +632,8 @@
if ((start ^ end) & ~0xffffUL)
maxlen = 0x10000 - (start & 0xffff);
- dma_addr = dma_handle = pci_map_single(priv->dev, (void *)buf, length,
- PCI_DMA_TODEVICE);
+ dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length,
+ DMA_TO_DEVICE);
} else {
/* above 16 MB we use a bounce buffer as ISA-DMA is not possible */
maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */
@@ -728,9 +729,9 @@
/* Turn off DMA mode */
frob_econtrol (port, 1<<3, 0);
-
+
if (dma_handle)
- pci_unmap_single(priv->dev, dma_handle, length, PCI_DMA_TODEVICE);
+ dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
dump_parport_state ("leave fifo_write_block_dma", port);
return length - left;
@@ -2146,7 +2147,7 @@
struct parport *parport_pc_probe_port (unsigned long int base,
unsigned long int base_hi,
int irq, int dma,
- struct pci_dev *dev)
+ struct device *dev)
{
struct parport_pc_private *priv;
struct parport_operations *ops;
@@ -2180,9 +2181,10 @@
priv->fifo_depth = 0;
priv->dma_buf = NULL;
priv->dma_handle = 0;
- priv->dev = dev;
INIT_LIST_HEAD(&priv->list);
priv->port = p;
+
+ p->dev = dev;
p->base_hi = base_hi;
p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
p->private_data = priv;
@@ -2305,9 +2307,10 @@
p->dma = PARPORT_DMA_NONE;
} else {
priv->dma_buf =
- pci_alloc_consistent(priv->dev,
+ dma_alloc_coherent(dev,
PAGE_SIZE,
- &priv->dma_handle);
+ &priv->dma_handle,
+ GFP_KERNEL);
if (! priv->dma_buf) {
printk (KERN_WARNING "%s: "
"cannot get buffer for DMA, "
@@ -2383,7 +2386,7 @@
release_region(p->base_hi, 3);
#if defined(CONFIG_PARPORT_PC_FIFO) && defined(HAS_DMA)
if (priv->dma_buf)
- pci_free_consistent(priv->dev, PAGE_SIZE,
+ dma_free_coherent(p->physport->dev, PAGE_SIZE,
priv->dma_buf,
priv->dma_handle);
#endif
@@ -2489,7 +2492,7 @@
*/
release_resource(base_res);
if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi,
- irq, PARPORT_DMA_NONE, NULL)) {
+ irq, PARPORT_DMA_NONE, &pdev->dev)) {
printk (KERN_INFO
"parport_pc: ITE 8872 parallel port: io=0x%X",
ite8872_lpt);
@@ -2672,7 +2675,7 @@
}
/* finally, do the probe with values obtained */
- if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) {
+ if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev)) {
printk (KERN_INFO
"parport_pc: VIA parallel port: io=0x%X", port1);
if (irq != PARPORT_IRQ_NONE)
@@ -2970,7 +2973,7 @@
parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi);
data->ports[count] =
parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
- PARPORT_DMA_NONE, dev);
+ PARPORT_DMA_NONE, &dev->dev);
if (data->ports[count])
count++;
}
@@ -3077,8 +3080,8 @@
} else
dma = PARPORT_DMA_NONE;
- printk(KERN_INFO "parport: PnPBIOS parport detected.\n");
- if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL)))
+ dev_info(&dev->dev, "reported by %s\n", dev->protocol->name);
+ if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, &dev->dev)))
return -ENODEV;
pnp_set_drvdata(dev,pdata);