ARM: ux500: remove support for early silicon revisions
The DB8500 ED (Early Drop) and V1 are only available inside of
ST-Ericsson or partners, we have actively replaced and scrapped
these prototypes. All Nova products on the open market (such as
the Snowball board) are based on V2 and later ASIC variants.
So let us focus on supporting the silicon that will be used and
delete this to get a clear overview.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index cf93dca..23be34b 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -22,6 +22,12 @@
#include "ste-dma40-db8500.h"
/*
+ * v2 has a new version of this block that need to be forced, the number found
+ * in hardware is incorrect
+ */
+#define U8500_SDI_V2_PERIPHID 0x10480180
+
+/*
* SDI 0 (MicroSD slot)
*/
@@ -117,10 +123,7 @@
gpio_direction_output(sdi0_en, 1);
/* Add the device, force v2 to subrevision 1 */
- if (cpu_is_u8500v2())
- db8500_add_sdi0(&mop500_sdi0_data, 0x10480180);
- else
- db8500_add_sdi0(&mop500_sdi0_data, 0);
+ db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
}
void mop500_sdi_tc35892_init(void)
@@ -194,7 +197,8 @@
static struct mmci_platform_data mop500_sdi2_data = {
.ocr_mask = MMC_VDD_165_195,
.f_max = 50000000,
- .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
@@ -244,20 +248,10 @@
void __init mop500_sdi_init(void)
{
- u32 periphid = 0;
-
- /* v2 has a new version of this block that need to be forced */
- if (cpu_is_u8500v2())
- periphid = 0x10480180;
- /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
- if (!cpu_is_u8500v10())
- mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
-
+ /* PoP:ed eMMC */
+ db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
-
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
@@ -267,13 +261,9 @@
void __init snowball_sdi_init(void)
{
- u32 periphid = 0x10480180;
-
- mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
-
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ /* External Micro SD slot */
mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
mop500_sdi0_data.cd_invert = true;
sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
@@ -283,19 +273,15 @@
void __init hrefv60_sdi_init(void)
{
- u32 periphid = 0x10480180;
-
- mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
-
+ /* PoP:ed eMMC */
+ db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
-
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ /* External Micro SD slot */
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
sdi0_en = HREFV60_SDMMC_EN_GPIO;
sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
sdi0_configure();
-
- db8500_add_sdi1(&mop500_sdi1_data, periphid);
+ /* WLAN SDIO channel */
+ db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
}