i2c: Let framebuffer drivers set their I2C bus class to DDC
Let framebuffer drivers set their I2C bus class to DDC. Once this is
done, we will be able to tell the eeprom driver to only probe for
EDID EEPROMs on these buses.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/video/fb_ddc.c b/drivers/video/fb_ddc.c
index a0df632..0cf96eb 100644
--- a/drivers/video/fb_ddc.c
+++ b/drivers/video/fb_ddc.c
@@ -106,6 +106,7 @@
algo_data->setsda(algo_data->data, 1);
algo_data->setscl(algo_data->data, 1);
+ adapter->class |= I2C_CLASS_DDC;
return edid;
}
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index ca95f09..fcf9fad 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -100,7 +100,8 @@
static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
struct intelfb_i2c_chan *chan,
- const u32 reg, const char *name)
+ const u32 reg, const char *name,
+ int class)
{
int rc;
@@ -108,6 +109,7 @@
chan->reg = reg;
snprintf(chan->adapter.name, sizeof(chan->adapter.name),
"intelfb %s", name);
+ chan->adapter.class = class;
chan->adapter.owner = THIS_MODULE;
chan->adapter.id = I2C_HW_B_INTELFB;
chan->adapter.algo_data = &chan->algo;
@@ -145,7 +147,7 @@
/* setup the DDC bus for analog output */
intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA,
- "CRTDDC_A");
+ "CRTDDC_A", I2C_CLASS_DDC);
i++;
/* need to add the output busses for each device
@@ -159,9 +161,9 @@
case INTEL_865G:
dinfo->output[i].type = INTELFB_OUTPUT_DVO;
intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus,
- GPIOD, "DVODDC_D");
+ GPIOD, "DVODDC_D", I2C_CLASS_DDC);
intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
- GPIOE, "DVOI2C_E");
+ GPIOE, "DVOI2C_E", 0);
i++;
break;
case INTEL_915G:
@@ -174,7 +176,7 @@
/* SDVO ports have a single control bus - 2 devices */
dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
- GPIOE, "SDVOCTRL_E");
+ GPIOE, "SDVOCTRL_E", 0);
/* TODO: initialize the SDVO */
/* I830SDVOInit(pScrn, i, DVOB); */
i++;
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 4baab7b..75ee5a1 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -104,7 +104,9 @@
};
static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo,
- unsigned int data, unsigned int clock, const char* name) {
+ unsigned int data, unsigned int clock, const char *name,
+ int class)
+{
int err;
b->minfo = minfo;
@@ -114,6 +116,7 @@
snprintf(b->adapter.name, sizeof(b->adapter.name), name,
minfo->fbcon.node);
i2c_set_adapdata(&b->adapter, b);
+ b->adapter.class = class;
b->adapter.algo_data = &b->bac;
b->adapter.dev.parent = &ACCESS_FBINFO(pcidev)->dev;
b->bac = matrox_i2c_algo_template;
@@ -159,22 +162,29 @@
switch (ACCESS_FBINFO(chip)) {
case MGA_2064:
case MGA_2164:
- err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1B_DATA, DDC1B_CLK, "DDC:fb%u #0");
+ err = i2c_bus_reg(&m2info->ddc1, minfo,
+ DDC1B_DATA, DDC1B_CLK,
+ "DDC:fb%u #0", I2C_CLASS_DDC);
break;
default:
- err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1_DATA, DDC1_CLK, "DDC:fb%u #0");
+ err = i2c_bus_reg(&m2info->ddc1, minfo,
+ DDC1_DATA, DDC1_CLK,
+ "DDC:fb%u #0", I2C_CLASS_DDC);
break;
}
if (err)
goto fail_ddc1;
if (ACCESS_FBINFO(devflags.dualhead)) {
- err = i2c_bus_reg(&m2info->ddc2, minfo, DDC2_DATA, DDC2_CLK, "DDC:fb%u #1");
+ err = i2c_bus_reg(&m2info->ddc2, minfo,
+ DDC2_DATA, DDC2_CLK,
+ "DDC:fb%u #1", I2C_CLASS_DDC);
if (err == -ENODEV) {
printk(KERN_INFO "i2c-matroxfb: VGA->TV plug detected, DDC unavailable.\n");
} else if (err)
printk(KERN_INFO "i2c-matroxfb: Could not register secondary output i2c bus. Continuing anyway.\n");
/* Register maven bus even on G450/G550 */
- err = i2c_bus_reg(&m2info->maven, minfo, MAT_DATA, MAT_CLK, "MAVEN:fb%u");
+ err = i2c_bus_reg(&m2info->maven, minfo,
+ MAT_DATA, MAT_CLK, "MAVEN:fb%u", 0);
if (err)
printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
}