ARM: dts: msm: Add pm8950 and pmi8950 pmic peripherals
Add device tree files to support pm8950 and pmi8950 pmic peripherals.
Change-Id: Ibb8283af8e849fe75983b2e4305765e89c00cc8d
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
diff --git a/arch/arm/boot/dts/qcom/pm8950.dtsi b/arch/arm/boot/dts/qcom/pm8950.dtsi
new file mode 100644
index 0000000..f47872a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8950.dtsi
@@ -0,0 +1,388 @@
+/* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&spmi_bus {
+ qcom,pm8950@0 {
+ compatible ="qcom,spmi-pmic";
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ pm8950_revid: qcom,revid@100 {
+ compatible = "qcom,qpnp-revid";
+ reg = <0x100 0x100>;
+ };
+
+ pm8950_temp_alarm: qcom,temp-alarm@2400 {
+ compatible = "qcom,qpnp-temp-alarm";
+ reg = <0x2400 0x100>;
+ interrupts = <0x0 0x24 0x0>;
+ label = "pm8950_tz";
+ qcom,channel-num = <8>;
+ qcom,threshold-set = <0>;
+ qcom,temp_alarm-vadc = <&pm8950_vadc>;
+ };
+
+ qcom,power-on@800 {
+ compatible = "qcom,qpnp-power-on";
+ reg = <0x800 0x100>;
+ interrupts = <0x0 0x8 0x0>,
+ <0x0 0x8 0x1>,
+ <0x0 0x8 0x4>,
+ <0x0 0x8 0x5>;
+ interrupt-names = "kpdpwr", "resin",
+ "resin-bark", "kpdpwr-resin-bark";
+ qcom,pon-dbc-delay = <15625>;
+ qcom,system-reset;
+
+ qcom,pon_1 {
+ qcom,pon-type = <0>;
+ qcom,pull-up = <1>;
+ linux,code = <116>;
+ };
+
+ qcom,pon_2 {
+ qcom,pon-type = <1>;
+ qcom,pull-up = <1>;
+ linux,code = <114>;
+ };
+ };
+
+ pm8950_coincell: qcom,coincell@2800 {
+ compatible = "qcom,qpnp-coincell";
+ reg = <0x2800 0x100>;
+ };
+
+ pm8950_mpps: mpps {
+ compatible = "qcom,qpnp-pin";
+ spmi-dev-container;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "pm8950-mpp";
+
+ mpp@a000 {
+ reg = <0xa000 0x100>;
+ qcom,pin-num = <1>;
+ status = "disabled";
+ };
+
+ mpp@a100 {
+ /* MPP2 - PA_THERM config */
+ reg = <0xa100 0x100>;
+ qcom,pin-num = <2>;
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <1>; /* AMUX 6 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+
+ mpp@a200 {
+ reg = <0xa200 0x100>;
+ qcom,pin-num = <3>;
+ status = "disabled";
+ };
+
+ mpp@a300 {
+ /* MPP4 - CASE_THERM config */
+ reg = <0xa300 0x100>;
+ qcom,pin-num = <4>;
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <3>; /* AMUX 8 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+ };
+
+ pm8950_gpios: gpios {
+ spmi-dev-container;
+ compatible = "qcom,qpnp-pin";
+ gpio-controller;
+ #gpio-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "pm8950-gpio";
+
+ gpio@c000 {
+ reg = <0xc000 0x100>;
+ qcom,pin-num = <1>;
+ status = "disabled";
+ };
+
+ gpio@c100 {
+ reg = <0xc100 0x100>;
+ qcom,pin-num = <2>;
+ status = "disabled";
+ };
+
+ gpio@c200 {
+ reg = <0xc200 0x100>;
+ qcom,pin-num = <3>;
+ status = "disabled";
+ };
+
+ gpio@c300 {
+ reg = <0xc300 0x100>;
+ qcom,pin-num = <4>;
+ status = "disabled";
+ };
+
+ gpio@c400 {
+ reg = <0xc400 0x100>;
+ qcom,pin-num = <5>;
+ status = "disabled";
+ };
+
+ gpio@c500 {
+ reg = <0xc500 0x100>;
+ qcom,pin-num = <6>;
+ status = "disabled";
+ };
+
+ gpio@c600 {
+ reg = <0xc600 0x100>;
+ qcom,pin-num = <7>;
+ status = "disabled";
+ };
+
+ gpio@c700 {
+ reg = <0xc700 0x100>;
+ qcom,pin-num = <8>;
+ status = "disabled";
+ };
+ };
+
+ pm8950_vadc: vadc@3100 {
+ compatible = "qcom,qpnp-vadc";
+ reg = <0x3100 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0x0 0x31 0x0>;
+ interrupt-names = "eoc-int-en-set";
+ qcom,adc-bit-resolution = <15>;
+ qcom,adc-vdd-reference = <1800>;
+ qcom,vadc-poll-eoc;
+ qcom,pmic-revid = <&pm8950_revid>;
+
+ chan@5 {
+ label = "vcoin";
+ reg = <5>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <1>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@7 {
+ label = "vph_pwr";
+ reg = <7>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <1>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@8 {
+ label = "die_temp";
+ reg = <8>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <3>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@9 {
+ label = "ref_625mv";
+ reg = <9>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@a {
+ label = "ref_1250v";
+ reg = <0xa>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@c {
+ label = "ref_buf_625mv";
+ reg = <0xc>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@36 {
+ label = "pa_therm0";
+ reg = <0x36>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@11 {
+ label = "pa_therm1";
+ reg = <0x11>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ qcom,vadc-thermal-node;
+ };
+
+ chan@32 {
+ label = "xo_therm";
+ reg = <0x32>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <4>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ qcom,vadc-thermal-node;
+ };
+
+ chan@3c {
+ label = "xo_therm_buf";
+ reg = <0x3c>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <4>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ qcom,vadc-thermal-node;
+ };
+
+ chan@13 {
+ label = "case_therm";
+ reg = <0x13>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ qcom,vadc-thermal-node;
+ };
+ };
+
+ pm8950_adc_tm: vadc@3400 {
+ compatible = "qcom,qpnp-adc-tm";
+ reg = <0x3400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0x0 0x34 0x0>,
+ <0x0 0x34 0x3>,
+ <0x0 0x34 0x4>;
+ interrupt-names = "eoc-int-en-set",
+ "high-thr-en-set",
+ "low-thr-en-set";
+ qcom,adc-bit-resolution = <15>;
+ qcom,adc-vdd-reference = <1800>;
+ qcom,adc_tm-vadc = <&pm8950_vadc>;
+ qcom,pmic-revid = <&pm8950_revid>;
+
+ chan@36 {
+ label = "pa_therm0";
+ reg = <0x36>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ qcom,btm-channel-number = <0x48>;
+ qcom,thermal-node;
+ };
+
+ chan@7 {
+ label = "vph_pwr";
+ reg = <0x7>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <1>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ qcom,btm-channel-number = <0x68>;
+ };
+ };
+
+ pm8950_rtc: qcom,pm8950_rtc {
+ spmi-dev-container;
+ compatible = "qcom,qpnp-rtc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ qcom,qpnp-rtc-write = <0>;
+ qcom,qpnp-rtc-alarm-pwrup = <0>;
+
+ qcom,pm8950_rtc_rw@6000 {
+ reg = <0x6000 0x100>;
+ };
+
+ qcom,pm8950_rtc_alarm@6100 {
+ reg = <0x6100 0x100>;
+ interrupts = <0x0 0x61 0x1>;
+ };
+ };
+
+ qcom,leds@a300 {
+ compatible = "qcom,leds-qpnp";
+ reg = <0xa300 0x100>;
+ label = "mpp";
+ };
+ };
+
+ pm8950_1: qcom,pm8950@1 {
+ compatible ="qcom,spmi-pmic";
+ reg = <0x1 SPMI_USID>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ pm8950_pwm: pwm@bc00 {
+ status = "disabled";
+ compatible = "qcom,qpnp-pwm";
+ reg = <0xbc00 0x100>;
+ reg-names = "qpnp-lpg-channel-base";
+ qcom,channel-id = <0>;
+ qcom,supported-sizes = <6>, <9>;
+ #pwm-cells = <2>;
+ };
+ };
+};