| /* |
| * Driver for PCA9685 16-channel 12-bit PWM LED controller |
| * |
| * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de> |
| * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com> |
| * |
| * based on the pwm-twl-led.c driver |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/pwm.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| |
| /* |
| * Because the PCA9685 has only one prescaler per chip, changing the period of |
| * one channel affects the period of all 16 PWM outputs! |
| * However, the ratio between each configured duty cycle and the chip-wide |
| * period remains constant, because the OFF time is set in proportion to the |
| * counter range. |
| */ |
| |
| #define PCA9685_MODE1 0x00 |
| #define PCA9685_MODE2 0x01 |
| #define PCA9685_SUBADDR1 0x02 |
| #define PCA9685_SUBADDR2 0x03 |
| #define PCA9685_SUBADDR3 0x04 |
| #define PCA9685_ALLCALLADDR 0x05 |
| #define PCA9685_LEDX_ON_L 0x06 |
| #define PCA9685_LEDX_ON_H 0x07 |
| #define PCA9685_LEDX_OFF_L 0x08 |
| #define PCA9685_LEDX_OFF_H 0x09 |
| |
| #define PCA9685_ALL_LED_ON_L 0xFA |
| #define PCA9685_ALL_LED_ON_H 0xFB |
| #define PCA9685_ALL_LED_OFF_L 0xFC |
| #define PCA9685_ALL_LED_OFF_H 0xFD |
| #define PCA9685_PRESCALE 0xFE |
| |
| #define PCA9685_PRESCALE_MIN 0x03 /* => max. frequency of 1526 Hz */ |
| #define PCA9685_PRESCALE_MAX 0xFF /* => min. frequency of 24 Hz */ |
| |
| #define PCA9685_COUNTER_RANGE 4096 |
| #define PCA9685_DEFAULT_PERIOD 5000000 /* Default period_ns = 1/200 Hz */ |
| #define PCA9685_OSC_CLOCK_MHZ 25 /* Internal oscillator with 25 MHz */ |
| |
| #define PCA9685_NUMREGS 0xFF |
| #define PCA9685_MAXCHAN 0x10 |
| |
| #define LED_FULL (1 << 4) |
| #define MODE1_SLEEP (1 << 4) |
| #define MODE2_INVRT (1 << 4) |
| #define MODE2_OUTDRV (1 << 2) |
| |
| #define LED_N_ON_H(N) (PCA9685_LEDX_ON_H + (4 * (N))) |
| #define LED_N_ON_L(N) (PCA9685_LEDX_ON_L + (4 * (N))) |
| #define LED_N_OFF_H(N) (PCA9685_LEDX_OFF_H + (4 * (N))) |
| #define LED_N_OFF_L(N) (PCA9685_LEDX_OFF_L + (4 * (N))) |
| |
| struct pca9685 { |
| struct pwm_chip chip; |
| struct regmap *regmap; |
| int active_cnt; |
| int duty_ns; |
| int period_ns; |
| }; |
| |
| static inline struct pca9685 *to_pca(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct pca9685, chip); |
| } |
| |
| static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct pca9685 *pca = to_pca(chip); |
| unsigned long long duty; |
| unsigned int reg; |
| int prescale; |
| |
| if (period_ns != pca->period_ns) { |
| prescale = DIV_ROUND_CLOSEST(PCA9685_OSC_CLOCK_MHZ * period_ns, |
| PCA9685_COUNTER_RANGE * 1000) - 1; |
| |
| if (prescale >= PCA9685_PRESCALE_MIN && |
| prescale <= PCA9685_PRESCALE_MAX) { |
| /* Put chip into sleep mode */ |
| regmap_update_bits(pca->regmap, PCA9685_MODE1, |
| MODE1_SLEEP, MODE1_SLEEP); |
| |
| /* Change the chip-wide output frequency */ |
| regmap_write(pca->regmap, PCA9685_PRESCALE, prescale); |
| |
| /* Wake the chip up */ |
| regmap_update_bits(pca->regmap, PCA9685_MODE1, |
| MODE1_SLEEP, 0x0); |
| |
| /* Wait 500us for the oscillator to be back up */ |
| udelay(500); |
| |
| pca->period_ns = period_ns; |
| } else { |
| dev_err(chip->dev, |
| "prescaler not set: period out of bounds!\n"); |
| return -EINVAL; |
| } |
| } |
| |
| pca->duty_ns = duty_ns; |
| |
| if (duty_ns < 1) { |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_H; |
| else |
| reg = LED_N_OFF_H(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, LED_FULL); |
| |
| return 0; |
| } |
| |
| if (duty_ns == period_ns) { |
| /* Clear both OFF registers */ |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_L; |
| else |
| reg = LED_N_OFF_L(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, 0x0); |
| |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_H; |
| else |
| reg = LED_N_OFF_H(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, 0x0); |
| |
| /* Set the full ON bit */ |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_ON_H; |
| else |
| reg = LED_N_ON_H(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, LED_FULL); |
| |
| return 0; |
| } |
| |
| duty = PCA9685_COUNTER_RANGE * (unsigned long long)duty_ns; |
| duty = DIV_ROUND_UP_ULL(duty, period_ns); |
| |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_L; |
| else |
| reg = LED_N_OFF_L(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, (int)duty & 0xff); |
| |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_H; |
| else |
| reg = LED_N_OFF_H(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf); |
| |
| /* Clear the full ON bit, otherwise the set OFF time has no effect */ |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_ON_H; |
| else |
| reg = LED_N_ON_H(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, 0); |
| |
| return 0; |
| } |
| |
| static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pca9685 *pca = to_pca(chip); |
| unsigned int reg; |
| |
| /* |
| * The PWM subsystem does not support a pre-delay. |
| * So, set the ON-timeout to 0 |
| */ |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_ON_L; |
| else |
| reg = LED_N_ON_L(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, 0); |
| |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_ON_H; |
| else |
| reg = LED_N_ON_H(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, 0); |
| |
| /* |
| * Clear the full-off bit. |
| * It has precedence over the others and must be off. |
| */ |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_H; |
| else |
| reg = LED_N_OFF_H(pwm->hwpwm); |
| |
| regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0); |
| |
| return 0; |
| } |
| |
| static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pca9685 *pca = to_pca(chip); |
| unsigned int reg; |
| |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_H; |
| else |
| reg = LED_N_OFF_H(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, LED_FULL); |
| |
| /* Clear the LED_OFF counter. */ |
| if (pwm->hwpwm >= PCA9685_MAXCHAN) |
| reg = PCA9685_ALL_LED_OFF_L; |
| else |
| reg = LED_N_OFF_L(pwm->hwpwm); |
| |
| regmap_write(pca->regmap, reg, 0x0); |
| } |
| |
| static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pca9685 *pca = to_pca(chip); |
| |
| if (pca->active_cnt++ == 0) |
| return regmap_update_bits(pca->regmap, PCA9685_MODE1, |
| MODE1_SLEEP, 0x0); |
| |
| return 0; |
| } |
| |
| static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct pca9685 *pca = to_pca(chip); |
| |
| if (--pca->active_cnt == 0) |
| regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP, |
| MODE1_SLEEP); |
| } |
| |
| static const struct pwm_ops pca9685_pwm_ops = { |
| .enable = pca9685_pwm_enable, |
| .disable = pca9685_pwm_disable, |
| .config = pca9685_pwm_config, |
| .request = pca9685_pwm_request, |
| .free = pca9685_pwm_free, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct regmap_config pca9685_regmap_i2c_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = PCA9685_NUMREGS, |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static int pca9685_pwm_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct pca9685 *pca; |
| int ret; |
| int mode2; |
| |
| pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL); |
| if (!pca) |
| return -ENOMEM; |
| |
| pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config); |
| if (IS_ERR(pca->regmap)) { |
| ret = PTR_ERR(pca->regmap); |
| dev_err(&client->dev, "Failed to initialize register map: %d\n", |
| ret); |
| return ret; |
| } |
| pca->duty_ns = 0; |
| pca->period_ns = PCA9685_DEFAULT_PERIOD; |
| |
| i2c_set_clientdata(client, pca); |
| |
| regmap_read(pca->regmap, PCA9685_MODE2, &mode2); |
| |
| if (device_property_read_bool(&client->dev, "invert")) |
| mode2 |= MODE2_INVRT; |
| else |
| mode2 &= ~MODE2_INVRT; |
| |
| if (device_property_read_bool(&client->dev, "open-drain")) |
| mode2 &= ~MODE2_OUTDRV; |
| else |
| mode2 |= MODE2_OUTDRV; |
| |
| regmap_write(pca->regmap, PCA9685_MODE2, mode2); |
| |
| /* clear all "full off" bits */ |
| regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0); |
| regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0); |
| |
| pca->chip.ops = &pca9685_pwm_ops; |
| /* add an extra channel for ALL_LED */ |
| pca->chip.npwm = PCA9685_MAXCHAN + 1; |
| |
| pca->chip.dev = &client->dev; |
| pca->chip.base = -1; |
| pca->chip.can_sleep = true; |
| |
| return pwmchip_add(&pca->chip); |
| } |
| |
| static int pca9685_pwm_remove(struct i2c_client *client) |
| { |
| struct pca9685 *pca = i2c_get_clientdata(client); |
| |
| regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP, |
| MODE1_SLEEP); |
| |
| return pwmchip_remove(&pca->chip); |
| } |
| |
| static const struct i2c_device_id pca9685_id[] = { |
| { "pca9685", 0 }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, pca9685_id); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id pca9685_acpi_ids[] = { |
| { "INT3492", 0 }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids); |
| #endif |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id pca9685_dt_ids[] = { |
| { .compatible = "nxp,pca9685-pwm", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, pca9685_dt_ids); |
| #endif |
| |
| static struct i2c_driver pca9685_i2c_driver = { |
| .driver = { |
| .name = "pca9685-pwm", |
| .acpi_match_table = ACPI_PTR(pca9685_acpi_ids), |
| .of_match_table = of_match_ptr(pca9685_dt_ids), |
| }, |
| .probe = pca9685_pwm_probe, |
| .remove = pca9685_pwm_remove, |
| .id_table = pca9685_id, |
| }; |
| |
| module_i2c_driver(pca9685_i2c_driver); |
| |
| MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>"); |
| MODULE_DESCRIPTION("PWM driver for PCA9685"); |
| MODULE_LICENSE("GPL"); |