sh: Add some missing board headers.
Some of these were dropped in the header directory rework, add
the few missing ones back in.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/include/asm-sh/rts7751r2d.h b/include/asm-sh/rts7751r2d.h
new file mode 100644
index 0000000..796b8fc
--- /dev/null
+++ b/include/asm-sh/rts7751r2d.h
@@ -0,0 +1,74 @@
+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000 Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Box specific addresses. */
+
+#define PA_BCR 0xa4000000 /* FPGA */
+#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
+#define PA_CFCTL 0xa4000004 /* CF Timing control */
+#define PA_CFPOW 0xa4000006 /* CF Power control */
+#define PA_DISPCTL 0xa4000008 /* Display Timing control */
+#define PA_SDMPOW 0xa400000a /* SD Power control */
+#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
+#define PA_PCICD 0xa400000e /* PCI Extention detect control */
+#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
+#if defined(CONFIG_RTS7751R2D_REV11)
+#define PA_AXRST 0xa4000022 /* AX_LAN Reset control */
+#define PA_CFRST 0xa4000024 /* CF Reset control */
+#define PA_ADMRTS 0xa4000026 /* SD Reset control */
+#define PA_EXTRST 0xa4000028 /* Extention Reset control */
+#define PA_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
+#else
+#define PA_CFRST 0xa4000022 /* CF Reset control */
+#define PA_ADMRTS 0xa4000024 /* SD Reset control */
+#define PA_EXTRST 0xa4000026 /* Extention Reset control */
+#define PA_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
+#define PA_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
+#endif
+#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
+#define PA_VERREG 0xa4000032 /* FPGA Version Register */
+#define PA_INPORT 0xa4000034 /* KEY Input Port control */
+#define PA_OUTPORT 0xa4000036 /* LED control */
+#define PA_DMPORT 0xa4000038 /* DM270 Output Port control */
+
+#define PA_AX88796L 0xaa000400 /* AX88796L Area */
+#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
+#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
+#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
+
+#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
+
+#if defined(CONFIG_RTS7751R2D_REV11)
+#define IRQ_PCIETH 0 /* PCI Ethernet IRQ */
+#define IRQ_CFCARD 1 /* CF Card IRQ */
+#define IRQ_CFINST 2 /* CF Card Insert IRQ */
+#define IRQ_PCMCIA 3 /* PCMCIA IRQ */
+#define IRQ_VOYAGER 4 /* VOYAGER IRQ */
+#define IRQ_ONETH 5 /* On board Ethernet IRQ */
+#else
+#define IRQ_KEYIN 0 /* Key Input IRQ */
+#define IRQ_PCIETH 1 /* PCI Ethernet IRQ */
+#define IRQ_CFCARD 2 /* CF Card IRQ */
+#define IRQ_CFINST 3 /* CF Card Insert IRQ */
+#define IRQ_PCMCIA 4 /* PCMCIA IRQ */
+#define IRQ_VOYAGER 5 /* VOYAGER IRQ */
+#endif
+#define IRQ_RTCALM 6 /* RTC Alarm IRQ */
+#define IRQ_RTCTIME 7 /* RTC Timer IRQ */
+#define IRQ_SDCARD 8 /* SD Card IRQ */
+#define IRQ_PCISLOT1 9 /* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2 10 /* PCI Slot #2 IRQ */
+#define IRQ_EXTENTION 11 /* EXTn IRQ */
+
+#define __IO_PREFIX rts7751r2d
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_RENESAS_RTS7751R2D */