ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S
Split sram24xx.S into sram242x.S and sram243x.S
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 4a9e491..4c27451 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-omap2/sram-fn.S
+ * linux/arch/arm/mach-omap2/sram242x.S
*
* Omap2 specific functions that need to be run in internal SRAM
*
@@ -27,22 +27,20 @@
#include <asm/arch/io.h>
#include <asm/hardware.h>
-#include "sdrc.h"
#include "prm.h"
#include "cm.h"
-
-#define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+#include "sdrc.h"
.text
-ENTRY(sram_ddr_init)
+ENTRY(omap242x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r12, r2 @ capture CS1 vs CS0
mov r8, r3 @ capture force parameter
/* frequency shift down */
- ldr r2, cm_clksel2_pll @ get address of dpllout reg
+ ldr r2, omap242x_sdi_cm_clksel2_pll @ get address of dpllout reg
mov r3, #0x1 @ value for 1x operation
str r3, [r2] @ go to L1-freq operation
@@ -51,7 +49,7 @@
bl voltage_shift @ go drop voltage
/* dll lock mode */
- ldr r11, sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r11, omap242x_sdi_sdrc_dlla_ctrl @ addr of dlla ctrl
ldr r10, [r11] @ get current val
cmp r12, #0x1 @ cs1 base (2422 es2.05/1)
addeq r11, r11, #0x8 @ if cs1 base, move to DLLB
@@ -102,7 +100,7 @@
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift:
- ldr r4, prcm_voltctrl @ get addr of volt ctrl.
+ ldr r4, omap242x_sdi_prcm_voltctrl @ get addr of volt ctrl.
ldr r5, [r4] @ get value.
ldr r6, prcm_mask_val @ get value of mask
and r5, r5, r6 @ apply mask to clear bits
@@ -112,7 +110,7 @@
orr r5, r5, r3 @ build value for force
str r5, [r4] @ Force transition to L1
- ldr r3, timer_32ksynct_cr @ get addr of counter
+ ldr r3, omap242x_sdi_timer_32ksynct_cr @ get addr of counter
ldr r5, [r3] @ get value
add r5, r5, #0x3 @ give it at most 93uS
volt_delay:
@@ -121,32 +119,31 @@
bhi volt_delay @ not yet->branch
mov pc, lr @ back to caller.
-/* relative load constants */
-cm_clksel2_pll:
+omap242x_sdi_cm_clksel2_pll:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-sdrc_dlla_ctrl:
+omap242x_sdi_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-prcm_voltctrl:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_sdi_prcm_voltctrl:
+ .word OMAP242X_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
-timer_32ksynct_cr:
- .word TIMER_32KSYNCT_CR_V
-ENTRY(sram_ddr_init_sz)
- .word . - sram_ddr_init
+omap242x_sdi_timer_32ksynct_cr:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap242x_sram_ddr_init_sz)
+ .word . - omap242x_sram_ddr_init
/*
* Reprograms memory timings.
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
-ENTRY(sram_reprogram_sdrc)
+ENTRY(omap242x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
mcr p15, 0, r3, c7, c10, 4 @ memory barrier, finish ARM SDR/DDR
nop
nop
- ldr r6, ddr_sdrc_rfr_ctrl @ get addr of refresh reg
+ ldr r6, omap242x_srs_sdrc_rfr_ctrl @ get addr of refresh reg
ldr r5, [r6] @ get value
mov r5, r5, lsr #8 @ isolate rfr field and drop burst
@@ -160,7 +157,7 @@
movne r5, r5, lsl #1 @ mult by 2 if to full
mov r5, r5, lsl #8 @ put rfr field back into place
add r5, r5, #0x1 @ turn on burst of 1
- ldr r4, ddr_cm_clksel2_pll @ get address of out reg
+ ldr r4, omap242x_srs_cm_clksel2_pll @ get address of out reg
ldr r3, [r4] @ get curr value
orr r3, r3, #0x3
bic r3, r3, #0x3 @ clear lower bits
@@ -181,7 +178,7 @@
bne freq_out @ leave if SDR, no DLL function
/* With DDR, we need to take care of the DLL for the frequency change */
- ldr r2, ddr_sdrc_dlla_ctrl @ addr of dlla ctrl
+ ldr r2, omap242x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
str r1, [r2] @ write out new SDRC_DLLA_CTRL
add r2, r2, #0x8 @ addr to SDRC_DLLB_CTRL
str r1, [r2] @ commit to SDRC_DLLB_CTRL
@@ -197,7 +194,7 @@
* wait for it to finish, use 32k sync counter, 1tick=31uS.
*/
voltage_shift_c:
- ldr r10, ddr_prcm_voltctrl @ get addr of volt ctrl
+ ldr r10, omap242x_srs_prcm_voltctrl @ get addr of volt ctrl
ldr r8, [r10] @ get value
ldr r7, ddr_prcm_mask_val @ get value of mask
and r8, r8, r7 @ apply mask to clear bits
@@ -207,7 +204,7 @@
orr r8, r8, r7 @ build value for force
str r8, [r10] @ Force transition to L1
- ldr r10, ddr_timer_32ksynct @ get addr of counter
+ ldr r10, omap242x_srs_timer_32ksynct @ get addr of counter
ldr r8, [r10] @ get value
add r8, r8, #0x2 @ give it at most 62uS (min 31+)
volt_delay_c:
@@ -216,39 +213,39 @@
bhi volt_delay_c @ not yet->branch
mov pc, lr @ back to caller
-ddr_cm_clksel2_pll:
+omap242x_srs_cm_clksel2_pll:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-ddr_sdrc_dlla_ctrl:
+omap242x_srs_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ddr_sdrc_rfr_ctrl:
+omap242x_srs_sdrc_rfr_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-ddr_prcm_voltctrl:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
+omap242x_srs_prcm_voltctrl:
+ .word OMAP242X_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
-ddr_timer_32ksynct:
- .word TIMER_32KSYNCT_CR_V
+omap242x_srs_timer_32ksynct:
+ .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
-ENTRY(sram_reprogram_sdrc_sz)
- .word . - sram_reprogram_sdrc
+ENTRY(omap242x_sram_reprogram_sdrc_sz)
+ .word . - omap242x_sram_reprogram_sdrc
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
-ENTRY(sram_set_prcm)
+ENTRY(omap242x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
adr r8, pend @ addr of preload end
mcrr p15, 1, r8, r4, c12 @ preload into icache
pbegin:
/* move into fast relock bypass */
- ldr r8, pll_ctl @ get addr
+ ldr r8, omap242x_ssp_pll_ctl @ get addr
ldr r5, [r8] @ get val
mvn r6, #0x3 @ clear mask
and r5, r5, r6 @ clear field
orr r7, r5, #0x2 @ fast relock val
str r7, [r8] @ go to fast relock
- ldr r4, pll_stat @ addr of stat
+ ldr r4, omap242x_ssp_pll_stat @ addr of stat
block:
/* wait for bypass */
ldr r8, [r4] @ stat value
@@ -257,10 +254,10 @@
bne block @ loop if not
/* set new dpll dividers _after_ in bypass */
- ldr r4, pll_div @ get addr
+ ldr r4, omap242x_ssp_pll_div @ get addr
str r0, [r4] @ set dpll ctrl val
- ldr r4, set_config @ get addr
+ ldr r4, omap242x_ssp_set_config @ get addr
mov r8, #1 @ valid cfg msk
str r8, [r4] @ make dividers take
@@ -274,8 +271,8 @@
beq pend @ jump over dpll relock
/* relock DPLL with new vals */
- ldr r5, pll_stat @ get addr
- ldr r4, pll_ctl @ get addr
+ ldr r5, omap242x_ssp_pll_stat @ get addr
+ ldr r4, omap242x_ssp_pll_ctl @ get addr
orr r8, r7, #0x3 @ val for lock dpll
str r8, [r4] @ set val
mov r0, #1000 @ dead spin a bit
@@ -289,9 +286,9 @@
bne wait_lock @ wait if not
pend:
/* update memory timings & briefly lock dll */
- ldr r4, sdrc_rfr @ get addr
+ ldr r4, omap242x_ssp_sdrc_rfr @ get addr
str r1, [r4] @ update refresh timing
- ldr r11, dlla_ctrl @ get addr of DLLA ctrl
+ ldr r11, omap242x_ssp_dlla_ctrl @ get addr of DLLA ctrl
ldr r10, [r11] @ get current val
mvn r9, #0x4 @ mask to get clear bit2
and r10, r10, r9 @ clear bit2 for lock mode
@@ -307,18 +304,18 @@
nop
ldmfd sp!, {r0-r12, pc} @ restore regs and return
-set_config:
- .word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
-pll_ctl:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
-pll_stat:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
-pll_div:
- .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
-sdrc_rfr:
+omap242x_ssp_set_config:
+ .word OMAP242X_PRCM_CLKCFG_CTRL
+omap242x_ssp_pll_ctl:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap242x_ssp_pll_stat:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap242x_ssp_pll_div:
+ .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap242x_ssp_sdrc_rfr:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-dlla_ctrl:
+omap242x_ssp_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-ENTRY(sram_set_prcm_sz)
- .word . - sram_set_prcm
+ENTRY(omap242x_sram_set_prcm_sz)
+ .word . - omap242x_sram_set_prcm