[SCSI] lpfc 8.3.23: Fixes related to new hardware
Fixes related to new hardware
- Restrict driver to look at BAR2 or BAR4 only for if_type 0.
- Allow SLI4 with FCOE_MODE not set for new SLI4 FC adapters.
- Add Temporary RPI field to the ELS request WQE.
- Do not override CT field in issue_els_flogi for SLI4 IF type 2
- For RQ_CREATE_V2 mbx cmd: fill in the rqe_size and page_size for RQ_CREATE.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 580b00b..837d272 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4769,8 +4769,7 @@
else
phba->hba_flag &= ~HBA_FIP_SUPPORT;
- if (phba->sli_rev != LPFC_SLI_REV4 ||
- !(phba->hba_flag & HBA_FCOE_MODE)) {
+ if (phba->sli_rev != LPFC_SLI_REV4) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0376 READ_REV Error. SLI Level %d "
"FCoE enabled %d\n",
@@ -6403,6 +6402,7 @@
uint32_t els_id = LPFC_ELS_ID_DEFAULT;
int numBdes, i;
struct ulp_bde64 bde;
+ struct lpfc_nodelist *ndlp;
fip = phba->hba_flag & HBA_FIP_SUPPORT;
/* The fcp commands will set command type */
@@ -6448,6 +6448,7 @@
switch (iocbq->iocb.ulpCommand) {
case CMD_ELS_REQUEST64_CR:
+ ndlp = (struct lpfc_nodelist *)iocbq->context1;
if (!iocbq->iocb.ulpLe) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2007 Only Limited Edition cmd Format"
@@ -6473,6 +6474,7 @@
els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK)
>> LPFC_FIP_ELS_ID_SHIFT);
}
+ bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, ndlp->nlp_rpi);
bf_set(wqe_els_id, &wqe->els_req.wqe_com, els_id);
bf_set(wqe_dbde, &wqe->els_req.wqe_com, 1);
bf_set(wqe_iod, &wqe->els_req.wqe_com, LPFC_WQE_IOD_READ);
@@ -6605,6 +6607,7 @@
command_type = OTHER_COMMAND;
break;
case CMD_XMIT_ELS_RSP64_CX:
+ ndlp = (struct lpfc_nodelist *)iocbq->context1;
/* words0-2 BDE memcpy */
/* word3 iocb=iotag32 wqe=response_payload_len */
wqe->xmit_els_rsp.response_payload_len = xmit_len;
@@ -6627,6 +6630,7 @@
bf_set(wqe_lenloc, &wqe->xmit_els_rsp.wqe_com,
LPFC_WQE_LENLOC_WORD3);
bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0);
+ bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, ndlp->nlp_rpi);
command_type = OTHER_COMMAND;
break;
case CMD_CLOSE_XRI_CN:
@@ -10523,8 +10527,8 @@
bf_set(lpfc_mbox_hdr_version, &shdr->request,
phba->sli4_hba.pc_sli4_params.cqv);
if (phba->sli4_hba.pc_sli4_params.cqv == LPFC_Q_CREATE_VERSION_2) {
- bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request,
- (PAGE_SIZE/SLI4_PAGE_SIZE));
+ /* FW only supports 1. Should be PAGE_SIZE/SLI4_PAGE_SIZE */
+ bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request, 1);
bf_set(lpfc_cq_eq_id_2, &cq_create->u.request.context,
eq->queue_id);
} else {
@@ -10968,6 +10972,12 @@
&rq_create->u.request.context,
hrq->entry_count);
rq_create->u.request.context.buffer_size = LPFC_HDR_BUF_SIZE;
+ bf_set(lpfc_rq_context_rqe_size,
+ &rq_create->u.request.context,
+ LPFC_RQE_SIZE_8);
+ bf_set(lpfc_rq_context_page_size,
+ &rq_create->u.request.context,
+ (PAGE_SIZE/SLI4_PAGE_SIZE));
} else {
switch (hrq->entry_count) {
default:
@@ -11043,9 +11053,12 @@
phba->sli4_hba.pc_sli4_params.rqv);
if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
bf_set(lpfc_rq_context_rqe_count_1,
- &rq_create->u.request.context,
- hrq->entry_count);
+ &rq_create->u.request.context, hrq->entry_count);
rq_create->u.request.context.buffer_size = LPFC_DATA_BUF_SIZE;
+ bf_set(lpfc_rq_context_rqe_size, &rq_create->u.request.context,
+ LPFC_RQE_SIZE_8);
+ bf_set(lpfc_rq_context_page_size, &rq_create->u.request.context,
+ (PAGE_SIZE/SLI4_PAGE_SIZE));
} else {
switch (drq->entry_count) {
default: