drm/i915/skl: Program PLL for edp1.4 intermediate frequencies
v2: Making the link_clock half in switch inline with the DPLL_CTRL1_* macros
(Ville)
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a99f7ff..33d5877 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1080,7 +1080,7 @@
}
static void
-skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_bw)
+skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
{
u32 ctrl1;
@@ -1089,19 +1089,35 @@
pipe_config->dpll_hw_state.cfgcr2 = 0;
ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
- switch (link_bw) {
- case DP_LINK_BW_1_62:
+ switch (link_clock / 2) {
+ case 81000:
ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810,
SKL_DPLL0);
break;
- case DP_LINK_BW_2_7:
+ case 135000:
ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350,
SKL_DPLL0);
break;
- case DP_LINK_BW_5_4:
+ case 270000:
ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700,
SKL_DPLL0);
break;
+ case 162000:
+ ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1620,
+ SKL_DPLL0);
+ break;
+ /* TBD: For DP link rates 2.16 GHz and 4.32 GHz, VCO is 8640 which
+ results in CDCLK change. Need to handle the change of CDCLK by
+ disabling pipes and re-enabling them */
+ case 108000:
+ ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1080,
+ SKL_DPLL0);
+ break;
+ case 216000:
+ ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2160,
+ SKL_DPLL0);
+ break;
+
}
pipe_config->dpll_hw_state.ctrl1 = ctrl1;
}
@@ -1396,7 +1412,7 @@
}
if (IS_SKYLAKE(dev) && is_edp(intel_dp))
- skl_edp_set_pll_config(pipe_config, intel_dp->link_bw);
+ skl_edp_set_pll_config(pipe_config, supported_rates[clock]);
else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
else