| /* |
| * Toshiba rbtx4927 specific setup |
| * |
| * Author: MontaVista Software, Inc. |
| * source@mvista.com |
| * |
| * Copyright 2001-2002 MontaVista Software Inc. |
| * |
| * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) |
| * Copyright (C) 2000 RidgeRun, Inc. |
| * Author: RidgeRun, Inc. |
| * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: jsun@mvista.com or jsun@junsun.net |
| * |
| * Copyright 2002 MontaVista Software Inc. |
| * Author: Michael Pruznick, michael_pruznick@mvista.com |
| * |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * |
| * Copyright (C) 2004 MontaVista Software Inc. |
| * Author: Manish Lachwani, mlachwani@mvista.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/leds.h> |
| #include <asm/io.h> |
| #include <asm/reboot.h> |
| #include <asm/txx9/generic.h> |
| #include <asm/txx9/pci.h> |
| #include <asm/txx9/rbtx4927.h> |
| #include <asm/txx9/tx4938.h> /* for TX4937 */ |
| |
| #ifdef CONFIG_PCI |
| static void __init tx4927_pci_setup(void) |
| { |
| int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB); |
| struct pci_controller *c = &txx9_primary_pcic; |
| |
| register_pci_controller(c); |
| |
| if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) |
| txx9_pci_option = |
| (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | |
| TXX9_PCI_OPT_CLK_66; /* already configured */ |
| |
| /* Reset PCI Bus */ |
| writeb(1, rbtx4927_pcireset_addr); |
| /* Reset PCIC */ |
| txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| TXX9_PCI_OPT_CLK_66) |
| tx4927_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| writeb(0, rbtx4927_pcireset_addr); |
| iob(); |
| |
| tx4927_report_pciclk(); |
| tx4927_pcic_setup(tx4927_pcicptr, c, extarb); |
| if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| TXX9_PCI_OPT_CLK_AUTO && |
| txx9_pci66_check(c, 0, 0)) { |
| /* Reset PCI Bus */ |
| writeb(1, rbtx4927_pcireset_addr); |
| /* Reset PCIC */ |
| txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| tx4927_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); |
| writeb(0, rbtx4927_pcireset_addr); |
| iob(); |
| /* Reinitialize PCIC */ |
| tx4927_report_pciclk(); |
| tx4927_pcic_setup(tx4927_pcicptr, c, extarb); |
| } |
| tx4927_setup_pcierr_irq(); |
| } |
| |
| static void __init tx4937_pci_setup(void) |
| { |
| int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); |
| struct pci_controller *c = &txx9_primary_pcic; |
| |
| register_pci_controller(c); |
| |
| if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) |
| txx9_pci_option = |
| (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | |
| TXX9_PCI_OPT_CLK_66; /* already configured */ |
| |
| /* Reset PCI Bus */ |
| writeb(1, rbtx4927_pcireset_addr); |
| /* Reset PCIC */ |
| txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| TXX9_PCI_OPT_CLK_66) |
| tx4938_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| writeb(0, rbtx4927_pcireset_addr); |
| iob(); |
| |
| tx4938_report_pciclk(); |
| tx4927_pcic_setup(tx4938_pcicptr, c, extarb); |
| if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == |
| TXX9_PCI_OPT_CLK_AUTO && |
| txx9_pci66_check(c, 0, 0)) { |
| /* Reset PCI Bus */ |
| writeb(1, rbtx4927_pcireset_addr); |
| /* Reset PCIC */ |
| txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| tx4938_pciclk66_setup(); |
| mdelay(10); |
| /* clear PCIC reset */ |
| txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); |
| writeb(0, rbtx4927_pcireset_addr); |
| iob(); |
| /* Reinitialize PCIC */ |
| tx4938_report_pciclk(); |
| tx4927_pcic_setup(tx4938_pcicptr, c, extarb); |
| } |
| tx4938_setup_pcierr_irq(); |
| } |
| |
| static void __init rbtx4927_arch_init(void) |
| { |
| tx4927_pci_setup(); |
| } |
| |
| static void __init rbtx4937_arch_init(void) |
| { |
| tx4937_pci_setup(); |
| } |
| #else |
| #define rbtx4927_arch_init NULL |
| #define rbtx4937_arch_init NULL |
| #endif /* CONFIG_PCI */ |
| |
| static void toshiba_rbtx4927_restart(char *command) |
| { |
| /* enable the s/w reset register */ |
| writeb(1, rbtx4927_softresetlock_addr); |
| |
| /* wait for enable to be seen */ |
| while (!(readb(rbtx4927_softresetlock_addr) & 1)) |
| ; |
| |
| /* do a s/w reset */ |
| writeb(1, rbtx4927_softreset_addr); |
| |
| /* fallback */ |
| (*_machine_halt)(); |
| } |
| |
| static void __init rbtx4927_clock_init(void); |
| static void __init rbtx4937_clock_init(void); |
| |
| static void __init rbtx4927_mem_setup(void) |
| { |
| char *argptr; |
| |
| if (TX4927_REV_PCODE() == 0x4927) { |
| rbtx4927_clock_init(); |
| tx4927_setup(); |
| } else { |
| rbtx4937_clock_init(); |
| tx4938_setup(); |
| } |
| |
| _machine_restart = toshiba_rbtx4927_restart; |
| |
| #ifdef CONFIG_PCI |
| txx9_alloc_pci_controller(&txx9_primary_pcic, |
| RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, |
| RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); |
| txx9_board_pcibios_setup = tx4927_pcibios_setup; |
| #else |
| set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); |
| #endif |
| |
| /* TX4927-SIO DTR on (PIO[15]) */ |
| gpio_request(15, "sio-dtr"); |
| gpio_direction_output(15, 1); |
| |
| tx4927_sio_init(0, 0); |
| #ifdef CONFIG_SERIAL_TXX9_CONSOLE |
| argptr = prom_getcmdline(); |
| if (!strstr(argptr, "console=")) |
| strcat(argptr, " console=ttyS0,38400"); |
| #endif |
| } |
| |
| static void __init rbtx4927_clock_init(void) |
| { |
| /* |
| * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. |
| * |
| * For TX4927: |
| * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). |
| * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) |
| * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) |
| * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) |
| * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) |
| * i.e. S9[3]: ON (83MHz), OFF (100MHz) |
| */ |
| switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & |
| TX4927_CCFG_PCIDIVMODE_MASK) { |
| case TX4927_CCFG_PCIDIVMODE_2_5: |
| case TX4927_CCFG_PCIDIVMODE_5: |
| txx9_cpu_clock = 166666666; /* 166MHz */ |
| break; |
| default: |
| txx9_cpu_clock = 200000000; /* 200MHz */ |
| } |
| } |
| |
| static void __init rbtx4937_clock_init(void) |
| { |
| /* |
| * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. |
| * |
| * For TX4937: |
| * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) |
| * PCIDIVMODE[10] is 0. |
| * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) |
| * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) |
| * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) |
| * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) |
| * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) |
| * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) |
| */ |
| switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & |
| TX4938_CCFG_PCIDIVMODE_MASK) { |
| case TX4938_CCFG_PCIDIVMODE_8: |
| case TX4938_CCFG_PCIDIVMODE_4: |
| txx9_cpu_clock = 266666666; /* 266MHz */ |
| break; |
| case TX4938_CCFG_PCIDIVMODE_9: |
| case TX4938_CCFG_PCIDIVMODE_4_5: |
| txx9_cpu_clock = 300000000; /* 300MHz */ |
| break; |
| default: |
| txx9_cpu_clock = 333333333; /* 333MHz */ |
| } |
| } |
| |
| static void __init rbtx4927_time_init(void) |
| { |
| tx4927_time_init(0); |
| } |
| |
| static void __init toshiba_rbtx4927_rtc_init(void) |
| { |
| struct resource res = { |
| .start = RBTX4927_BRAMRTC_BASE - IO_BASE, |
| .end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| platform_device_register_simple("rtc-ds1742", -1, &res, 1); |
| } |
| |
| static void __init rbtx4927_ne_init(void) |
| { |
| struct resource res[] = { |
| { |
| .start = RBTX4927_RTL_8019_BASE, |
| .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, |
| .flags = IORESOURCE_IO, |
| }, { |
| .start = RBTX4927_RTL_8019_IRQ, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); |
| } |
| |
| static void __init rbtx4927_mtd_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < 2; i++) |
| tx4927_mtd_init(i); |
| } |
| |
| static void __init rbtx4927_gpioled_init(void) |
| { |
| static struct gpio_led leds[] = { |
| { .name = "gpioled:green:0", .gpio = 0, .active_low = 1, }, |
| { .name = "gpioled:green:1", .gpio = 1, .active_low = 1, }, |
| }; |
| static struct gpio_led_platform_data pdata = { |
| .num_leds = ARRAY_SIZE(leds), |
| .leds = leds, |
| }; |
| struct platform_device *pdev = platform_device_alloc("leds-gpio", 0); |
| |
| if (!pdev) |
| return; |
| pdev->dev.platform_data = &pdata; |
| if (platform_device_add(pdev)) |
| platform_device_put(pdev); |
| } |
| |
| static void __init rbtx4927_device_init(void) |
| { |
| toshiba_rbtx4927_rtc_init(); |
| rbtx4927_ne_init(); |
| tx4927_wdt_init(); |
| rbtx4927_mtd_init(); |
| txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL); |
| rbtx4927_gpioled_init(); |
| } |
| |
| struct txx9_board_vec rbtx4927_vec __initdata = { |
| .system = "Toshiba RBTX4927", |
| .prom_init = rbtx4927_prom_init, |
| .mem_setup = rbtx4927_mem_setup, |
| .irq_setup = rbtx4927_irq_setup, |
| .time_init = rbtx4927_time_init, |
| .device_init = rbtx4927_device_init, |
| .arch_init = rbtx4927_arch_init, |
| #ifdef CONFIG_PCI |
| .pci_map_irq = rbtx4927_pci_map_irq, |
| #endif |
| }; |
| struct txx9_board_vec rbtx4937_vec __initdata = { |
| .system = "Toshiba RBTX4937", |
| .prom_init = rbtx4927_prom_init, |
| .mem_setup = rbtx4927_mem_setup, |
| .irq_setup = rbtx4927_irq_setup, |
| .time_init = rbtx4927_time_init, |
| .device_init = rbtx4927_device_init, |
| .arch_init = rbtx4937_arch_init, |
| #ifdef CONFIG_PCI |
| .pci_map_irq = rbtx4927_pci_map_irq, |
| #endif |
| }; |