regulator: wm8350: Convert to use linear ranges
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 7f0fa22..5453dd0 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -542,41 +542,12 @@
return 0;
}
-static int wm8350_ldo_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector > WM8350_LDO1_VSEL_MASK)
- return -EINVAL;
-
- if (selector < 16)
- return (selector * 50000) + 900000;
- else
- return ((selector - 16) * 100000) + 1800000;
-}
-
-static int wm8350_ldo_map_voltage(struct regulator_dev *rdev, int min_uV,
- int max_uV)
-{
- int volt, sel;
- int min_mV = min_uV / 1000;
- int max_mV = max_uV / 1000;
-
- if (min_mV < 900 || min_mV > 3300)
- return -EINVAL;
- if (max_mV < 900 || max_mV > 3300)
- return -EINVAL;
-
- if (min_mV < 1800) /* step size is 50mV < 1800mV */
- sel = DIV_ROUND_UP(min_uV - 900, 50);
- else /* step size is 100mV > 1800mV */
- sel = DIV_ROUND_UP(min_uV - 1800, 100) + 16;
-
- volt = wm8350_ldo_list_voltage(rdev, sel);
- if (volt < min_uV || volt > max_uV)
- return -EINVAL;
-
- return sel;
-}
+static const struct regulator_linear_range wm8350_ldo_ranges[] = {
+ { .min_uV = 900000, .max_uV = 1750000, .min_sel = 0, .max_sel = 15,
+ .uV_step = 50000 },
+ { .min_uV = 1800000, .max_uV = 3300000, .min_sel = 16, .max_sel = 31,
+ .uV_step = 100000 },
+};
static int wm8350_ldo_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
@@ -603,7 +574,7 @@
return -EINVAL;
}
- sel = wm8350_ldo_map_voltage(rdev, uV, uV);
+ sel = regulator_map_voltage_linear_range(rdev, uV, uV);
if (sel < 0)
return -EINVAL;
@@ -998,10 +969,10 @@
};
static struct regulator_ops wm8350_ldo_ops = {
- .map_voltage = wm8350_ldo_map_voltage,
+ .map_voltage = regulator_map_voltage_linear_range,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .list_voltage = wm8350_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_linear_range,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
@@ -1108,6 +1079,8 @@
.irq = WM8350_IRQ_UV_LDO1,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO1_VSEL_MASK + 1,
+ .linear_ranges = wm8350_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
.vsel_reg = WM8350_LDO1_CONTROL,
.vsel_mask = WM8350_LDO1_VSEL_MASK,
.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1121,6 +1094,8 @@
.irq = WM8350_IRQ_UV_LDO2,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO2_VSEL_MASK + 1,
+ .linear_ranges = wm8350_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
.vsel_reg = WM8350_LDO2_CONTROL,
.vsel_mask = WM8350_LDO2_VSEL_MASK,
.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1134,6 +1109,8 @@
.irq = WM8350_IRQ_UV_LDO3,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO3_VSEL_MASK + 1,
+ .linear_ranges = wm8350_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
.vsel_reg = WM8350_LDO3_CONTROL,
.vsel_mask = WM8350_LDO3_VSEL_MASK,
.enable_reg = WM8350_DCDC_LDO_REQUESTED,
@@ -1147,6 +1124,8 @@
.irq = WM8350_IRQ_UV_LDO4,
.type = REGULATOR_VOLTAGE,
.n_voltages = WM8350_LDO4_VSEL_MASK + 1,
+ .linear_ranges = wm8350_ldo_ranges,
+ .n_linear_ranges = ARRAY_SIZE(wm8350_ldo_ranges),
.vsel_reg = WM8350_LDO4_CONTROL,
.vsel_mask = WM8350_LDO4_VSEL_MASK,
.enable_reg = WM8350_DCDC_LDO_REQUESTED,