usb: phy: isp1301: implement PHY API
this patch implements ->init() and ->set_vbus()
methods for isp1301 transceiver driver.
Later patches can now come in order to remove
the hackery from ohci-nxp and lpc32xx udc drivers.
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 5e0f143..225ae6c 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -14,6 +14,7 @@
#include <linux/mutex.h>
#include <linux/i2c.h>
#include <linux/usb/phy.h>
+#include <linux/usb/isp1301.h>
#define DRV_NAME "isp1301"
@@ -24,6 +25,8 @@
struct i2c_client *client;
};
+#define phy_to_isp(p) (container_of((p), struct isp1301, phy))
+
static const struct i2c_device_id isp1301_id[] = {
{ "isp1301", 0 },
{ }
@@ -31,6 +34,60 @@
static struct i2c_client *isp1301_i2c_client;
+static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
+{
+ return i2c_smbus_write_byte_data(isp->client, reg | clear, value);
+}
+
+static int isp1301_write(struct isp1301 *isp, u8 reg, u8 value)
+{
+ return __isp1301_write(isp, reg, value, 0);
+}
+
+static int isp1301_clear(struct isp1301 *isp, u8 reg, u8 value)
+{
+ return __isp1301_write(isp, reg, value, ISP1301_I2C_REG_CLEAR_ADDR);
+}
+
+static int isp1301_phy_init(struct usb_phy *phy)
+{
+ struct isp1301 *isp = phy_to_isp(phy);
+
+ /* Disable transparent UART mode first */
+ isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_UART_EN);
+ isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, ~MC1_SPEED_REG);
+ isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
+ isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_2, ~0);
+ isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_PSW_EN
+ | MC2_SPD_SUSP_CTRL));
+
+ isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, ~0);
+ isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
+ isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLDOWN
+ | OTG1_DP_PULLDOWN));
+ isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLUP
+ | OTG1_DP_PULLUP));
+
+ /* mask all interrupts */
+ isp1301_clear(isp, ISP1301_I2C_INTERRUPT_LATCH, ~0);
+ isp1301_clear(isp, ISP1301_I2C_INTERRUPT_FALLING, ~0);
+ isp1301_clear(isp, ISP1301_I2C_INTERRUPT_RISING, ~0);
+
+ return 0;
+}
+
+static int isp1301_phy_set_vbus(struct usb_phy *phy, int on)
+{
+ struct isp1301 *isp = phy_to_isp(phy);
+
+ if (on)
+ isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+ else
+ isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+
+ return 0;
+}
+
static int isp1301_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
@@ -46,6 +103,8 @@
phy = &isp->phy;
phy->label = DRV_NAME;
+ phy->init = isp1301_phy_init;
+ phy->set_vbus = isp1301_phy_set_vbus;
phy->type = USB_PHY_TYPE_USB2;
i2c_set_clientdata(client, isp);