staging:iio:magnetometer:ak8975 use standard i2c_smbus read functions.
Now the mysterious NOSTART flag is gone from the read, we can use the
i2c_smbus_read_byte/word/i2c_block_data functions instead of the
local reimplementation of these standard functions.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index 1428849f..af6c320 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -123,35 +123,6 @@
}
/*
- * Helper function to read a contiguous set of the I2C device's registers.
- */
-static int ak8975_read_data(struct i2c_client *client,
- u8 reg, u8 length, u8 *buffer)
-{
- int ret;
- struct i2c_msg msg[2] = {
- {
- .addr = client->addr,
- .len = 1,
- .buf = ®,
- }, {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = length,
- .buf = buffer,
- }
- };
-
- ret = i2c_transfer(client->adapter, msg, 2);
- if (ret < 0) {
- dev_err(&client->dev, "Read from device fails\n");
- return ret;
- }
-
- return 0;
-}
-
-/*
* Perform some start-of-day setup, including reading the asa calibration
* values and caching them.
*/
@@ -163,11 +134,12 @@
int ret;
/* Confirm that the device we're talking to is really an AK8975. */
- ret = ak8975_read_data(client, AK8975_REG_WIA, 1, &device_id);
+ ret = i2c_smbus_read_byte_data(client, AK8975_REG_WIA);
if (ret < 0) {
dev_err(&client->dev, "Error reading WIA\n");
return ret;
}
+ device_id = ret;
if (device_id != AK8975_DEVICE_ID) {
dev_err(&client->dev, "Device ak8975 not found\n");
return -ENODEV;
@@ -185,7 +157,8 @@
}
/* Get asa data and store in the device data. */
- ret = ak8975_read_data(client, AK8975_REG_ASAX, 3, data->asa);
+ ret = i2c_smbus_read_i2c_block_data(client, AK8975_REG_ASAX,
+ 3, data->asa);
if (ret < 0) {
dev_err(&client->dev, "Not able to read asa data\n");
return ret;
@@ -247,7 +220,6 @@
static int wait_conversion_complete_gpio(struct ak8975_data *data)
{
struct i2c_client *client = data->client;
- u8 read_status;
u32 timeout_ms = AK8975_MAX_CONVERSION_TIMEOUT;
int ret;
@@ -263,12 +235,11 @@
return -EINVAL;
}
- ret = ak8975_read_data(client, AK8975_REG_ST1, 1, &read_status);
- if (ret < 0) {
+ ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
+ if (ret < 0)
dev_err(&client->dev, "Error in reading ST1\n");
- return ret;
- }
- return read_status;
+
+ return ret;
}
static int wait_conversion_complete_polled(struct ak8975_data *data)
@@ -281,11 +252,12 @@
/* Wait for the conversion to complete. */
while (timeout_ms) {
msleep(AK8975_CONVERSION_DONE_POLL_TIME);
- ret = ak8975_read_data(client, AK8975_REG_ST1, 1, &read_status);
+ ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST1);
if (ret < 0) {
dev_err(&client->dev, "Error in reading ST1\n");
return ret;
}
+ read_status = ret;
if (read_status)
break;
timeout_ms -= AK8975_CONVERSION_DONE_POLL_TIME;
@@ -306,7 +278,6 @@
struct i2c_client *client = data->client;
u16 meas_reg;
s16 raw;
- u8 read_status;
int ret;
mutex_lock(&data->lock);
@@ -330,18 +301,15 @@
if (ret < 0)
goto exit;
- read_status = ret;
-
- if (read_status & AK8975_REG_ST1_DRDY_MASK) {
- ret = ak8975_read_data(client, AK8975_REG_ST2, 1, &read_status);
+ if (ret & AK8975_REG_ST1_DRDY_MASK) {
+ ret = i2c_smbus_read_byte_data(client, AK8975_REG_ST2);
if (ret < 0) {
dev_err(&client->dev, "Error in reading ST2\n");
goto exit;
}
- if (read_status & (AK8975_REG_ST2_DERR_MASK |
- AK8975_REG_ST2_HOFL_MASK)) {
- dev_err(&client->dev, "ST2 status error 0x%x\n",
- read_status);
+ if (ret & (AK8975_REG_ST2_DERR_MASK |
+ AK8975_REG_ST2_HOFL_MASK)) {
+ dev_err(&client->dev, "ST2 status error 0x%x\n", ret);
ret = -EINVAL;
goto exit;
}
@@ -349,12 +317,12 @@
/* Read the flux value from the appropriate register
(the register is specified in the iio device attributes). */
- ret = ak8975_read_data(client, ak8975_index_to_reg[index],
- 2, (u8 *)&meas_reg);
+ ret = i2c_smbus_read_word_data(client, ak8975_index_to_reg[index]);
if (ret < 0) {
dev_err(&client->dev, "Read axis data fails\n");
goto exit;
}
+ meas_reg = ret;
mutex_unlock(&data->lock);