| /* |
| * AMD CS5535/CS5536 GPIO driver |
| * Copyright (C) 2006 Advanced Micro Devices, Inc. |
| * Copyright (C) 2007-2009 Andres Salomon <dilinger@collabora.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/gpio.h> |
| #include <linux/io.h> |
| #include <linux/cs5535.h> |
| |
| #define DRV_NAME "cs5535-gpio" |
| #define GPIO_BAR 1 |
| |
| /* |
| * Some GPIO pins |
| * 31-29,23 : reserved (always mask out) |
| * 28 : Power Button |
| * 26 : PME# |
| * 22-16 : LPC |
| * 14,15 : SMBus |
| * 9,8 : UART1 |
| * 7 : PCI INTB |
| * 3,4 : UART2/DDC |
| * 2 : IDE_IRQ0 |
| * 1 : AC_BEEP |
| * 0 : PCI INTA |
| * |
| * If a mask was not specified, allow all except |
| * reserved and Power Button |
| */ |
| #define GPIO_DEFAULT_MASK 0x0F7FFFFF |
| |
| static ulong mask = GPIO_DEFAULT_MASK; |
| module_param_named(mask, mask, ulong, 0444); |
| MODULE_PARM_DESC(mask, "GPIO channel mask."); |
| |
| static struct cs5535_gpio_chip { |
| struct gpio_chip chip; |
| resource_size_t base; |
| |
| struct pci_dev *pdev; |
| spinlock_t lock; |
| } cs5535_gpio_chip; |
| |
| /* |
| * The CS5535/CS5536 GPIOs support a number of extra features not defined |
| * by the gpio_chip API, so these are exported. For a full list of the |
| * registers, see include/linux/cs5535.h. |
| */ |
| |
| static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset, |
| unsigned int reg) |
| { |
| if (offset < 16) |
| /* low bank register */ |
| outl(1 << offset, chip->base + reg); |
| else |
| /* high bank register */ |
| outl(1 << (offset - 16), chip->base + 0x80 + reg); |
| } |
| |
| void cs5535_gpio_set(unsigned offset, unsigned int reg) |
| { |
| struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| __cs5535_gpio_set(chip, offset, reg); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(cs5535_gpio_set); |
| |
| static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset, |
| unsigned int reg) |
| { |
| if (offset < 16) |
| /* low bank register */ |
| outl(1 << (offset + 16), chip->base + reg); |
| else |
| /* high bank register */ |
| outl(1 << offset, chip->base + 0x80 + reg); |
| } |
| |
| void cs5535_gpio_clear(unsigned offset, unsigned int reg) |
| { |
| struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| __cs5535_gpio_clear(chip, offset, reg); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(cs5535_gpio_clear); |
| |
| int cs5535_gpio_isset(unsigned offset, unsigned int reg) |
| { |
| struct cs5535_gpio_chip *chip = &cs5535_gpio_chip; |
| unsigned long flags; |
| long val; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| if (offset < 16) |
| /* low bank register */ |
| val = inl(chip->base + reg); |
| else { |
| /* high bank register */ |
| val = inl(chip->base + 0x80 + reg); |
| offset -= 16; |
| } |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| return (val & (1 << offset)) ? 1 : 0; |
| } |
| EXPORT_SYMBOL_GPL(cs5535_gpio_isset); |
| |
| /* |
| * Generic gpio_chip API support. |
| */ |
| |
| static int chip_gpio_request(struct gpio_chip *c, unsigned offset) |
| { |
| struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| |
| /* check if this pin is available */ |
| if ((mask & (1 << offset)) == 0) { |
| dev_info(&chip->pdev->dev, |
| "pin %u is not available (check mask)\n", offset); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| return -EINVAL; |
| } |
| |
| /* disable output aux 1 & 2 on this pin */ |
| __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX1); |
| __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX2); |
| |
| /* disable input aux 1 on this pin */ |
| __cs5535_gpio_clear(chip, offset, GPIO_INPUT_AUX1); |
| |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| return 0; |
| } |
| |
| static int chip_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| return cs5535_gpio_isset(offset, GPIO_READ_BACK); |
| } |
| |
| static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| { |
| if (val) |
| cs5535_gpio_set(offset, GPIO_OUTPUT_VAL); |
| else |
| cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL); |
| } |
| |
| static int chip_direction_input(struct gpio_chip *c, unsigned offset) |
| { |
| struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| __cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE); |
| __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_ENABLE); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| return 0; |
| } |
| |
| static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val) |
| { |
| struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| |
| __cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE); |
| __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE); |
| if (val) |
| __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL); |
| else |
| __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL); |
| |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| return 0; |
| } |
| |
| static const char * const cs5535_gpio_names[] = { |
| "GPIO0", "GPIO1", "GPIO2", "GPIO3", |
| "GPIO4", "GPIO5", "GPIO6", "GPIO7", |
| "GPIO8", "GPIO9", "GPIO10", "GPIO11", |
| "GPIO12", "GPIO13", "GPIO14", "GPIO15", |
| "GPIO16", "GPIO17", "GPIO18", "GPIO19", |
| "GPIO20", "GPIO21", "GPIO22", NULL, |
| "GPIO24", "GPIO25", "GPIO26", "GPIO27", |
| "GPIO28", NULL, NULL, NULL, |
| }; |
| |
| static struct cs5535_gpio_chip cs5535_gpio_chip = { |
| .chip = { |
| .owner = THIS_MODULE, |
| .label = DRV_NAME, |
| |
| .base = 0, |
| .ngpio = 32, |
| .names = cs5535_gpio_names, |
| .request = chip_gpio_request, |
| |
| .get = chip_gpio_get, |
| .set = chip_gpio_set, |
| |
| .direction_input = chip_direction_input, |
| .direction_output = chip_direction_output, |
| }, |
| }; |
| |
| static int __init cs5535_gpio_probe(struct pci_dev *pdev, |
| const struct pci_device_id *pci_id) |
| { |
| int err; |
| ulong mask_orig = mask; |
| |
| /* There are two ways to get the GPIO base address; one is by |
| * fetching it from MSR_LBAR_GPIO, the other is by reading the |
| * PCI BAR info. The latter method is easier (especially across |
| * different architectures), so we'll stick with that for now. If |
| * it turns out to be unreliable in the face of crappy BIOSes, we |
| * can always go back to using MSRs.. */ |
| |
| err = pci_enable_device_io(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "can't enable device IO\n"); |
| goto done; |
| } |
| |
| err = pci_request_region(pdev, GPIO_BAR, DRV_NAME); |
| if (err) { |
| dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); |
| goto done; |
| } |
| |
| /* set up the driver-specific struct */ |
| cs5535_gpio_chip.base = pci_resource_start(pdev, GPIO_BAR); |
| cs5535_gpio_chip.pdev = pdev; |
| spin_lock_init(&cs5535_gpio_chip.lock); |
| |
| dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR, |
| (unsigned long long) cs5535_gpio_chip.base); |
| |
| /* mask out reserved pins */ |
| mask &= 0x1F7FFFFF; |
| |
| /* do not allow pin 28, Power Button, as there's special handling |
| * in the PMC needed. (note 12, p. 48) */ |
| mask &= ~(1 << 28); |
| |
| if (mask_orig != mask) |
| dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n", |
| mask_orig, mask); |
| |
| /* finally, register with the generic GPIO API */ |
| err = gpiochip_add(&cs5535_gpio_chip.chip); |
| if (err) |
| goto release_region; |
| |
| dev_info(&pdev->dev, DRV_NAME ": GPIO support successfully loaded.\n"); |
| return 0; |
| |
| release_region: |
| pci_release_region(pdev, GPIO_BAR); |
| done: |
| return err; |
| } |
| |
| static void __exit cs5535_gpio_remove(struct pci_dev *pdev) |
| { |
| int err; |
| |
| err = gpiochip_remove(&cs5535_gpio_chip.chip); |
| if (err) { |
| /* uhh? */ |
| dev_err(&pdev->dev, "unable to remove gpio_chip?\n"); |
| } |
| pci_release_region(pdev, GPIO_BAR); |
| } |
| |
| static struct pci_device_id cs5535_gpio_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, cs5535_gpio_pci_tbl); |
| |
| /* |
| * We can't use the standard PCI driver registration stuff here, since |
| * that allows only one driver to bind to each PCI device (and we want |
| * multiple drivers to be able to bind to the device). Instead, manually |
| * scan for the PCI device, request a single region, and keep track of the |
| * devices that we're using. |
| */ |
| |
| static int __init cs5535_gpio_scan_pci(void) |
| { |
| struct pci_dev *pdev; |
| int err = -ENODEV; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cs5535_gpio_pci_tbl); i++) { |
| pdev = pci_get_device(cs5535_gpio_pci_tbl[i].vendor, |
| cs5535_gpio_pci_tbl[i].device, NULL); |
| if (pdev) { |
| err = cs5535_gpio_probe(pdev, &cs5535_gpio_pci_tbl[i]); |
| if (err) |
| pci_dev_put(pdev); |
| |
| /* we only support a single CS5535/6 southbridge */ |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| static void __exit cs5535_gpio_free_pci(void) |
| { |
| cs5535_gpio_remove(cs5535_gpio_chip.pdev); |
| pci_dev_put(cs5535_gpio_chip.pdev); |
| } |
| |
| static int __init cs5535_gpio_init(void) |
| { |
| return cs5535_gpio_scan_pci(); |
| } |
| |
| static void __exit cs5535_gpio_exit(void) |
| { |
| cs5535_gpio_free_pci(); |
| } |
| |
| module_init(cs5535_gpio_init); |
| module_exit(cs5535_gpio_exit); |
| |
| MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>"); |
| MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver"); |
| MODULE_LICENSE("GPL"); |