regulator: core: Move helpers for drivers out into a separate file
Reduce the size of core.c a bit.
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
new file mode 100644
index 0000000..d13cf8f
--- /dev/null
+++ b/drivers/regulator/helpers.c
@@ -0,0 +1,361 @@
+/*
+ * helpers.c -- Voltage/Current Regulator framework helper functions.
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ * Copyright 2008 SlimLogic Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/module.h>
+
+/**
+ * regulator_is_enabled_regmap - standard is_enabled() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their is_enabled operation, saving some code.
+ */
+int regulator_is_enabled_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
+ if (ret != 0)
+ return ret;
+
+ if (rdev->desc->enable_is_inverted)
+ return (val & rdev->desc->enable_mask) == 0;
+ else
+ return (val & rdev->desc->enable_mask) != 0;
+}
+EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
+
+/**
+ * regulator_enable_regmap - standard enable() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their enable() operation, saving some code.
+ */
+int regulator_enable_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+
+ if (rdev->desc->enable_is_inverted)
+ val = 0;
+ else
+ val = rdev->desc->enable_mask;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_enable_regmap);
+
+/**
+ * regulator_disable_regmap - standard disable() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their disable() operation, saving some code.
+ */
+int regulator_disable_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+
+ if (rdev->desc->enable_is_inverted)
+ val = rdev->desc->enable_mask;
+ else
+ val = 0;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_disable_regmap);
+
+/**
+ * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * vsel_reg and vsel_mask fields in their descriptor and then use this
+ * as their get_voltage_vsel operation, saving some code.
+ */
+int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+ if (ret != 0)
+ return ret;
+
+ val &= rdev->desc->vsel_mask;
+ val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
+
+/**
+ * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users
+ *
+ * @rdev: regulator to operate on
+ * @sel: Selector to set
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * vsel_reg and vsel_mask fields in their descriptor and then use this
+ * as their set_voltage_vsel operation, saving some code.
+ */
+int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
+{
+ int ret;
+
+ sel <<= ffs(rdev->desc->vsel_mask) - 1;
+
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+ rdev->desc->vsel_mask, sel);
+ if (ret)
+ return ret;
+
+ if (rdev->desc->apply_bit)
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+ rdev->desc->apply_bit,
+ rdev->desc->apply_bit);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
+
+/**
+ * regulator_map_voltage_iterate - map_voltage() based on list_voltage()
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers implementing set_voltage_sel() and list_voltage() can use
+ * this as their map_voltage() operation. It will find a suitable
+ * voltage by calling list_voltage() until it gets something in bounds
+ * for the requested voltages.
+ */
+int regulator_map_voltage_iterate(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int best_val = INT_MAX;
+ int selector = 0;
+ int i, ret;
+
+ /* Find the smallest voltage that falls within the specified
+ * range.
+ */
+ for (i = 0; i < rdev->desc->n_voltages; i++) {
+ ret = rdev->desc->ops->list_voltage(rdev, i);
+ if (ret < 0)
+ continue;
+
+ if (ret < best_val && ret >= min_uV && ret <= max_uV) {
+ best_val = ret;
+ selector = i;
+ }
+ }
+
+ if (best_val != INT_MAX)
+ return selector;
+ else
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate);
+
+/**
+ * regulator_map_voltage_ascend - map_voltage() for ascendant voltage list
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers that have ascendant voltage list can use this as their
+ * map_voltage() operation.
+ */
+int regulator_map_voltage_ascend(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int i, ret;
+
+ for (i = 0; i < rdev->desc->n_voltages; i++) {
+ ret = rdev->desc->ops->list_voltage(rdev, i);
+ if (ret < 0)
+ continue;
+
+ if (ret > max_uV)
+ break;
+
+ if (ret >= min_uV && ret <= max_uV)
+ return i;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend);
+
+/**
+ * regulator_map_voltage_linear - map_voltage() for simple linear mappings
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers providing min_uV and uV_step in their regulator_desc can
+ * use this as their map_voltage() operation.
+ */
+int regulator_map_voltage_linear(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int ret, voltage;
+
+ /* Allow uV_step to be 0 for fixed voltage */
+ if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
+ if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
+ return 0;
+ else
+ return -EINVAL;
+ }
+
+ if (!rdev->desc->uV_step) {
+ BUG_ON(!rdev->desc->uV_step);
+ return -EINVAL;
+ }
+
+ if (min_uV < rdev->desc->min_uV)
+ min_uV = rdev->desc->min_uV;
+
+ ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
+ if (ret < 0)
+ return ret;
+
+ ret += rdev->desc->linear_min_sel;
+
+ /* Map back into a voltage to verify we're still in bounds */
+ voltage = rdev->desc->ops->list_voltage(rdev, ret);
+ if (voltage < min_uV || voltage > max_uV)
+ return -EINVAL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
+
+/**
+ * regulator_map_voltage_linear - map_voltage() for multiple linear ranges
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers providing linear_ranges in their descriptor can use this as
+ * their map_voltage() callback.
+ */
+int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ const struct regulator_linear_range *range;
+ int ret = -EINVAL;
+ int voltage, i;
+
+ if (!rdev->desc->n_linear_ranges) {
+ BUG_ON(!rdev->desc->n_linear_ranges);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+ range = &rdev->desc->linear_ranges[i];
+
+ if (!(min_uV <= range->max_uV && max_uV >= range->min_uV))
+ continue;
+
+ if (min_uV <= range->min_uV)
+ min_uV = range->min_uV;
+
+ /* range->uV_step == 0 means fixed voltage range */
+ if (range->uV_step == 0) {
+ ret = 0;
+ } else {
+ ret = DIV_ROUND_UP(min_uV - range->min_uV,
+ range->uV_step);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret += range->min_sel;
+
+ break;
+ }
+
+ if (i == rdev->desc->n_linear_ranges)
+ return -EINVAL;
+
+ /* Map back into a voltage to verify we're still in bounds */
+ voltage = rdev->desc->ops->list_voltage(rdev, ret);
+ if (voltage < min_uV || voltage > max_uV)
+ return -EINVAL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
+
+/**
+ * regulator_set_bypass_regmap - Default set_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: state to set.
+ */
+int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
+{
+ unsigned int val;
+
+ if (enable)
+ val = rdev->desc->bypass_mask;
+ else
+ val = 0;
+
+ return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
+ rdev->desc->bypass_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
+
+/**
+ * regulator_get_bypass_regmap - Default get_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: current state.
+ */
+int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
+ if (ret != 0)
+ return ret;
+
+ *enable = val & rdev->desc->bypass_mask;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);