Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Small fixes on multiple ARM platforms
- A build regression from a previous fix on dove and mv78xx0
- Two fixes for recently (3.5-rc1) changed mmp/pxa code
- multiple omap2+ bug fixes
- two trivial fixes for i.MX
- one v3.5 regression for mxs"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: apx4devkit: fix FEC enabling PHY clock
ARM: OMAP2+: hwmod data: Fix wrong McBSP clock alias on OMAP4
ARM: OMAP4: hwmod data: temporarily comment out data for the usb_host_fs and aess IP blocks
ARM: Orion: Fix WDT compile for Dove and MV78xx0
ARM: mmp: remove mach/gpio-pxa.h
ARM: imx: assert SCC gate stays enabled
ARM: OMAP4: TWL6030: ensure sys_nirq1 is mux'd and wakeup enabled
ARM: OMAP2: Overo: init I2C before MMC to fix MMC suspend/resume failure
ARM: imx27_visstrim_m10: Do not include <asm/system.h>
ARM: pxa: hx4700: Fix basic suspend/resume
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 226949d..f953bb5 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -50,5 +50,6 @@
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index ad1165d..d52b0ef 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -78,6 +78,7 @@
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 920a8cc..c6422fb 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -201,7 +201,6 @@
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -264,6 +263,14 @@
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index f76edb9..ba09552 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,7 +38,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 0e135a5..0000000
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index c64dbb9..eb187e0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -31,5 +31,6 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 3674497..e807c4c 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -42,6 +42,7 @@
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
@@ -59,6 +60,7 @@
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
/*
* Register Map
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 5e90b9d..f5f0617 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -205,6 +205,16 @@
return 0;
}
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static void __init apx4devkit_init(void)
{
mx28_soc_init();
@@ -225,6 +235,7 @@
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+ apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8fa2fc3..779734d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -494,8 +494,8 @@
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
overo_i2c_init();
+ omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index f30e861..b7bcba5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1928,7 +1928,7 @@
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@@ -1963,7 +1963,7 @@
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@@ -1998,7 +1998,7 @@
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@@ -2033,7 +2033,7 @@
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@@ -3864,7 +3864,7 @@
};
/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
.master = &omap44xx_usb_host_fs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
@@ -3922,7 +3922,7 @@
};
/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
.master = &omap44xx_aess_hwmod,
.slave = &omap44xx_l4_abe_hwmod,
.clk = "ocp_abe_iclk",
@@ -4013,7 +4013,7 @@
};
/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -4031,7 +4031,7 @@
};
/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -5857,7 +5857,7 @@
};
/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_fs_hwmod,
.clk = "l4_div_ck",
@@ -6014,13 +6014,13 @@
&omap44xx_iva__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_host_fs__l3_main_2,
+ /* &omap44xx_usb_host_fs__l3_main_2, */
&omap44xx_usb_host_hs__l3_main_2,
&omap44xx_usb_otg_hs__l3_main_2,
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
+ /* &omap44xx_aess__l4_abe, */
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
@@ -6029,8 +6029,8 @@
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
+ /* &omap44xx_l4_abe__aess, */
+ /* &omap44xx_l4_abe__aess_dma, */
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
@@ -6136,7 +6136,7 @@
&omap44xx_l4_per__uart2,
&omap44xx_l4_per__uart3,
&omap44xx_l4_per__uart4,
- &omap44xx_l4_cfg__usb_host_fs,
+ /* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..43a9790 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -32,6 +32,7 @@
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
+#include "mux.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@@ -77,6 +78,7 @@
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
+ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index d09da6a..d3de84b 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -127,7 +127,11 @@
GPIO19_SSP2_SCLK,
GPIO86_SSP2_RXD,
GPIO87_SSP2_TXD,
- GPIO88_GPIO,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
/* HX4700 specific input GPIOs */
GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
@@ -135,6 +139,10 @@
GPIO14_GPIO, /* nWLAN_IRQ */
/* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
GPIO10_GPIO, /* GSM_IRQ */
@@ -872,14 +880,19 @@
{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
};
static void __init hx4700_init(void)
{
int ret;
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));