| /* |
| * SDLA An implementation of a driver for the Sangoma S502/S508 series |
| * multi-protocol PC interface card. Initial offering is with |
| * the DLCI driver, providing Frame Relay support for linux. |
| * |
| * Global definitions for the Frame relay interface. |
| * |
| * Version: @(#)sdla.c 0.30 12 Sep 1996 |
| * |
| * Credits: Sangoma Technologies, for the use of 2 cards for an extended |
| * period of time. |
| * David Mandelstam <dm@sangoma.com> for getting me started on |
| * this project, and incentive to complete it. |
| * Gene Kozen <74604.152@compuserve.com> for providing me with |
| * important information about the cards. |
| * |
| * Author: Mike McLagan <mike.mclagan@linux.org> |
| * |
| * Changes: |
| * 0.15 Mike McLagan Improved error handling, packet dropping |
| * 0.20 Mike McLagan New transmit/receive flags for config |
| * If in FR mode, don't accept packets from |
| * non DLCI devices. |
| * 0.25 Mike McLagan Fixed problem with rejecting packets |
| * from non DLCI devices. |
| * 0.30 Mike McLagan Fixed kernel panic when used with modified |
| * ifconfig |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <linux/in.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/if_frad.h> |
| #include <linux/sdla.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <asm/uaccess.h> |
| |
| static const char* version = "SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org"; |
| |
| static unsigned int valid_port[] = { 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390}; |
| |
| static unsigned int valid_mem[] = { |
| 0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000, |
| 0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000, |
| 0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000, |
| 0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000, |
| 0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000}; |
| |
| static DEFINE_SPINLOCK(sdla_lock); |
| |
| /********************************************************* |
| * |
| * these are the core routines that access the card itself |
| * |
| *********************************************************/ |
| |
| #define SDLA_WINDOW(dev,addr) outb((((addr) >> 13) & 0x1F), (dev)->base_addr + SDLA_REG_Z80_WINDOW) |
| |
| static void __sdla_read(struct net_device *dev, int addr, void *buf, short len) |
| { |
| char *temp; |
| const void *base; |
| int offset, bytes; |
| |
| temp = buf; |
| while(len) |
| { |
| offset = addr & SDLA_ADDR_MASK; |
| bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len; |
| base = (const void *) (dev->mem_start + offset); |
| |
| SDLA_WINDOW(dev, addr); |
| memcpy(temp, base, bytes); |
| |
| addr += bytes; |
| temp += bytes; |
| len -= bytes; |
| } |
| } |
| |
| static void sdla_read(struct net_device *dev, int addr, void *buf, short len) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&sdla_lock, flags); |
| __sdla_read(dev, addr, buf, len); |
| spin_unlock_irqrestore(&sdla_lock, flags); |
| } |
| |
| static void __sdla_write(struct net_device *dev, int addr, |
| const void *buf, short len) |
| { |
| const char *temp; |
| void *base; |
| int offset, bytes; |
| |
| temp = buf; |
| while(len) |
| { |
| offset = addr & SDLA_ADDR_MASK; |
| bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len; |
| base = (void *) (dev->mem_start + offset); |
| |
| SDLA_WINDOW(dev, addr); |
| memcpy(base, temp, bytes); |
| |
| addr += bytes; |
| temp += bytes; |
| len -= bytes; |
| } |
| } |
| |
| static void sdla_write(struct net_device *dev, int addr, |
| const void *buf, short len) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sdla_lock, flags); |
| __sdla_write(dev, addr, buf, len); |
| spin_unlock_irqrestore(&sdla_lock, flags); |
| } |
| |
| |
| static void sdla_clear(struct net_device *dev) |
| { |
| unsigned long flags; |
| char *base; |
| int len, addr, bytes; |
| |
| len = 65536; |
| addr = 0; |
| bytes = SDLA_WINDOW_SIZE; |
| base = (void *) dev->mem_start; |
| |
| spin_lock_irqsave(&sdla_lock, flags); |
| while(len) |
| { |
| SDLA_WINDOW(dev, addr); |
| memset(base, 0, bytes); |
| |
| addr += bytes; |
| len -= bytes; |
| } |
| spin_unlock_irqrestore(&sdla_lock, flags); |
| |
| } |
| |
| static char sdla_byte(struct net_device *dev, int addr) |
| { |
| unsigned long flags; |
| char byte, *temp; |
| |
| temp = (void *) (dev->mem_start + (addr & SDLA_ADDR_MASK)); |
| |
| spin_lock_irqsave(&sdla_lock, flags); |
| SDLA_WINDOW(dev, addr); |
| byte = *temp; |
| spin_unlock_irqrestore(&sdla_lock, flags); |
| |
| return byte; |
| } |
| |
| static void sdla_stop(struct net_device *dev) |
| { |
| struct frad_local *flp; |
| |
| flp = netdev_priv(dev); |
| switch(flp->type) |
| { |
| case SDLA_S502A: |
| outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL); |
| flp->state = SDLA_HALT; |
| break; |
| case SDLA_S502E: |
| outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL); |
| outb(SDLA_S502E_ENABLE, dev->base_addr + SDLA_REG_CONTROL); |
| flp->state = SDLA_S502E_ENABLE; |
| break; |
| case SDLA_S507: |
| flp->state &= ~SDLA_CPUEN; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| break; |
| case SDLA_S508: |
| flp->state &= ~SDLA_CPUEN; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| break; |
| } |
| } |
| |
| static void sdla_start(struct net_device *dev) |
| { |
| struct frad_local *flp; |
| |
| flp = netdev_priv(dev); |
| switch(flp->type) |
| { |
| case SDLA_S502A: |
| outb(SDLA_S502A_NMI, dev->base_addr + SDLA_REG_CONTROL); |
| outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL); |
| flp->state = SDLA_S502A_START; |
| break; |
| case SDLA_S502E: |
| outb(SDLA_S502E_CPUEN, dev->base_addr + SDLA_REG_Z80_CONTROL); |
| outb(0x00, dev->base_addr + SDLA_REG_CONTROL); |
| flp->state = 0; |
| break; |
| case SDLA_S507: |
| flp->state |= SDLA_CPUEN; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| break; |
| case SDLA_S508: |
| flp->state |= SDLA_CPUEN; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| break; |
| } |
| } |
| |
| /**************************************************** |
| * |
| * this is used for the S502A/E cards to determine |
| * the speed of the onboard CPU. Calibration is |
| * necessary for the Frame Relay code uploaded |
| * later. Incorrect results cause timing problems |
| * with link checks & status messages |
| * |
| ***************************************************/ |
| |
| static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2) |
| { |
| unsigned long start, done, now; |
| char resp, *temp; |
| |
| start = now = jiffies; |
| done = jiffies + jiffs; |
| |
| temp = (void *)dev->mem_start; |
| temp += z80_addr & SDLA_ADDR_MASK; |
| |
| resp = ~resp1; |
| while (time_before(jiffies, done) && (resp != resp1) && (!resp2 || (resp != resp2))) |
| { |
| if (jiffies != now) |
| { |
| SDLA_WINDOW(dev, z80_addr); |
| now = jiffies; |
| resp = *temp; |
| } |
| } |
| return time_before(jiffies, done) ? jiffies - start : -1; |
| } |
| |
| /* constants for Z80 CPU speed */ |
| #define Z80_READY '1' /* Z80 is ready to begin */ |
| #define LOADER_READY '2' /* driver is ready to begin */ |
| #define Z80_SCC_OK '3' /* SCC is on board */ |
| #define Z80_SCC_BAD '4' /* SCC was not found */ |
| |
| static int sdla_cpuspeed(struct net_device *dev, struct ifreq *ifr) |
| { |
| int jiffs; |
| char data; |
| |
| sdla_start(dev); |
| if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0) |
| return -EIO; |
| |
| data = LOADER_READY; |
| sdla_write(dev, 0, &data, 1); |
| |
| if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0) |
| return -EIO; |
| |
| sdla_stop(dev); |
| sdla_read(dev, 0, &data, 1); |
| |
| if (data == Z80_SCC_BAD) |
| { |
| printk("%s: SCC bad\n", dev->name); |
| return -EIO; |
| } |
| |
| if (data != Z80_SCC_OK) |
| return -EINVAL; |
| |
| if (jiffs < 165) |
| ifr->ifr_mtu = SDLA_CPU_16M; |
| else if (jiffs < 220) |
| ifr->ifr_mtu = SDLA_CPU_10M; |
| else if (jiffs < 258) |
| ifr->ifr_mtu = SDLA_CPU_8M; |
| else if (jiffs < 357) |
| ifr->ifr_mtu = SDLA_CPU_7M; |
| else if (jiffs < 467) |
| ifr->ifr_mtu = SDLA_CPU_5M; |
| else |
| ifr->ifr_mtu = SDLA_CPU_3M; |
| |
| return 0; |
| } |
| |
| /************************************************ |
| * |
| * Direct interaction with the Frame Relay code |
| * starts here. |
| * |
| ************************************************/ |
| |
| struct _dlci_stat |
| { |
| short dlci; |
| char flags; |
| } __packed; |
| |
| struct _frad_stat |
| { |
| char flags; |
| struct _dlci_stat dlcis[SDLA_MAX_DLCI]; |
| }; |
| |
| static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int len, void *data) |
| { |
| struct _dlci_stat *pstatus; |
| short *pdlci; |
| int i; |
| char *state, line[30]; |
| |
| switch (ret) |
| { |
| case SDLA_RET_MODEM: |
| state = data; |
| if (*state & SDLA_MODEM_DCD_LOW) |
| netdev_info(dev, "Modem DCD unexpectedly low!\n"); |
| if (*state & SDLA_MODEM_CTS_LOW) |
| netdev_info(dev, "Modem CTS unexpectedly low!\n"); |
| /* I should probably do something about this! */ |
| break; |
| |
| case SDLA_RET_CHANNEL_OFF: |
| netdev_info(dev, "Channel became inoperative!\n"); |
| /* same here */ |
| break; |
| |
| case SDLA_RET_CHANNEL_ON: |
| netdev_info(dev, "Channel became operative!\n"); |
| /* same here */ |
| break; |
| |
| case SDLA_RET_DLCI_STATUS: |
| netdev_info(dev, "Status change reported by Access Node\n"); |
| len /= sizeof(struct _dlci_stat); |
| for(pstatus = data, i=0;i < len;i++,pstatus++) |
| { |
| if (pstatus->flags & SDLA_DLCI_NEW) |
| state = "new"; |
| else if (pstatus->flags & SDLA_DLCI_DELETED) |
| state = "deleted"; |
| else if (pstatus->flags & SDLA_DLCI_ACTIVE) |
| state = "active"; |
| else |
| { |
| sprintf(line, "unknown status: %02X", pstatus->flags); |
| state = line; |
| } |
| netdev_info(dev, "DLCI %i: %s\n", |
| pstatus->dlci, state); |
| /* same here */ |
| } |
| break; |
| |
| case SDLA_RET_DLCI_UNKNOWN: |
| netdev_info(dev, "Received unknown DLCIs:"); |
| len /= sizeof(short); |
| for(pdlci = data,i=0;i < len;i++,pdlci++) |
| pr_cont(" %i", *pdlci); |
| pr_cont("\n"); |
| break; |
| |
| case SDLA_RET_TIMEOUT: |
| netdev_err(dev, "Command timed out!\n"); |
| break; |
| |
| case SDLA_RET_BUF_OVERSIZE: |
| netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n", |
| len); |
| break; |
| |
| case SDLA_RET_BUF_TOO_BIG: |
| netdev_info(dev, "Buffer size over specified max of %i\n", |
| len); |
| break; |
| |
| case SDLA_RET_CHANNEL_INACTIVE: |
| case SDLA_RET_DLCI_INACTIVE: |
| case SDLA_RET_CIR_OVERFLOW: |
| case SDLA_RET_NO_BUFS: |
| if (cmd == SDLA_INFORMATION_WRITE) |
| break; |
| |
| default: |
| netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n", |
| cmd, ret); |
| /* Further processing could be done here */ |
| break; |
| } |
| } |
| |
| static int sdla_cmd(struct net_device *dev, int cmd, short dlci, short flags, |
| void *inbuf, short inlen, void *outbuf, short *outlen) |
| { |
| static struct _frad_stat status; |
| struct frad_local *flp; |
| struct sdla_cmd *cmd_buf; |
| unsigned long pflags; |
| unsigned long jiffs; |
| int ret, waiting, len; |
| long window; |
| |
| flp = netdev_priv(dev); |
| window = flp->type == SDLA_S508 ? SDLA_508_CMD_BUF : SDLA_502_CMD_BUF; |
| cmd_buf = (struct sdla_cmd *)(dev->mem_start + (window & SDLA_ADDR_MASK)); |
| ret = 0; |
| len = 0; |
| jiffs = jiffies + HZ; /* 1 second is plenty */ |
| |
| spin_lock_irqsave(&sdla_lock, pflags); |
| SDLA_WINDOW(dev, window); |
| cmd_buf->cmd = cmd; |
| cmd_buf->dlci = dlci; |
| cmd_buf->flags = flags; |
| |
| if (inbuf) |
| memcpy(cmd_buf->data, inbuf, inlen); |
| |
| cmd_buf->length = inlen; |
| |
| cmd_buf->opp_flag = 1; |
| spin_unlock_irqrestore(&sdla_lock, pflags); |
| |
| waiting = 1; |
| len = 0; |
| while (waiting && time_before_eq(jiffies, jiffs)) |
| { |
| if (waiting++ % 3) |
| { |
| spin_lock_irqsave(&sdla_lock, pflags); |
| SDLA_WINDOW(dev, window); |
| waiting = ((volatile int)(cmd_buf->opp_flag)); |
| spin_unlock_irqrestore(&sdla_lock, pflags); |
| } |
| } |
| |
| if (!waiting) |
| { |
| |
| spin_lock_irqsave(&sdla_lock, pflags); |
| SDLA_WINDOW(dev, window); |
| ret = cmd_buf->retval; |
| len = cmd_buf->length; |
| if (outbuf && outlen) |
| { |
| *outlen = *outlen >= len ? len : *outlen; |
| |
| if (*outlen) |
| memcpy(outbuf, cmd_buf->data, *outlen); |
| } |
| |
| /* This is a local copy that's used for error handling */ |
| if (ret) |
| memcpy(&status, cmd_buf->data, len > sizeof(status) ? sizeof(status) : len); |
| |
| spin_unlock_irqrestore(&sdla_lock, pflags); |
| } |
| else |
| ret = SDLA_RET_TIMEOUT; |
| |
| if (ret != SDLA_RET_OK) |
| sdla_errors(dev, cmd, dlci, ret, len, &status); |
| |
| return ret; |
| } |
| |
| /*********************************************** |
| * |
| * these functions are called by the DLCI driver |
| * |
| ***********************************************/ |
| |
| static int sdla_reconfig(struct net_device *dev); |
| |
| static int sdla_activate(struct net_device *slave, struct net_device *master) |
| { |
| struct frad_local *flp; |
| int i; |
| |
| flp = netdev_priv(slave); |
| |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->master[i] == master) |
| break; |
| |
| if (i == CONFIG_DLCI_MAX) |
| return -ENODEV; |
| |
| flp->dlci[i] = abs(flp->dlci[i]); |
| |
| if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE)) |
| sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL); |
| |
| return 0; |
| } |
| |
| static int sdla_deactivate(struct net_device *slave, struct net_device *master) |
| { |
| struct frad_local *flp; |
| int i; |
| |
| flp = netdev_priv(slave); |
| |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->master[i] == master) |
| break; |
| |
| if (i == CONFIG_DLCI_MAX) |
| return -ENODEV; |
| |
| flp->dlci[i] = -abs(flp->dlci[i]); |
| |
| if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE)) |
| sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL); |
| |
| return 0; |
| } |
| |
| static int sdla_assoc(struct net_device *slave, struct net_device *master) |
| { |
| struct frad_local *flp; |
| int i; |
| |
| if (master->type != ARPHRD_DLCI) |
| return -EINVAL; |
| |
| flp = netdev_priv(slave); |
| |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| { |
| if (!flp->master[i]) |
| break; |
| if (abs(flp->dlci[i]) == *(short *)(master->dev_addr)) |
| return -EADDRINUSE; |
| } |
| |
| if (i == CONFIG_DLCI_MAX) |
| return -EMLINK; /* #### Alan: Comments on this ?? */ |
| |
| |
| flp->master[i] = master; |
| flp->dlci[i] = -*(short *)(master->dev_addr); |
| master->mtu = slave->mtu; |
| |
| if (netif_running(slave)) { |
| if (flp->config.station == FRAD_STATION_CPE) |
| sdla_reconfig(slave); |
| else |
| sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static int sdla_deassoc(struct net_device *slave, struct net_device *master) |
| { |
| struct frad_local *flp; |
| int i; |
| |
| flp = netdev_priv(slave); |
| |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->master[i] == master) |
| break; |
| |
| if (i == CONFIG_DLCI_MAX) |
| return -ENODEV; |
| |
| flp->master[i] = NULL; |
| flp->dlci[i] = 0; |
| |
| |
| if (netif_running(slave)) { |
| if (flp->config.station == FRAD_STATION_CPE) |
| sdla_reconfig(slave); |
| else |
| sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL); |
| } |
| |
| return 0; |
| } |
| |
| static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get) |
| { |
| struct frad_local *flp; |
| struct dlci_local *dlp; |
| int i; |
| short len, ret; |
| |
| flp = netdev_priv(slave); |
| |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->master[i] == master) |
| break; |
| |
| if (i == CONFIG_DLCI_MAX) |
| return -ENODEV; |
| |
| dlp = netdev_priv(master); |
| |
| ret = SDLA_RET_OK; |
| len = sizeof(struct dlci_conf); |
| if (netif_running(slave)) { |
| if (get) |
| ret = sdla_cmd(slave, SDLA_READ_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, |
| NULL, 0, &dlp->config, &len); |
| else |
| ret = sdla_cmd(slave, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, |
| &dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL); |
| } |
| |
| return ret == SDLA_RET_OK ? 0 : -EIO; |
| } |
| |
| /************************** |
| * |
| * now for the Linux driver |
| * |
| **************************/ |
| |
| /* NOTE: the DLCI driver deals with freeing the SKB!! */ |
| static netdev_tx_t sdla_transmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct frad_local *flp; |
| int ret, addr, accept, i; |
| short size; |
| unsigned long flags; |
| struct buf_entry *pbuf; |
| |
| flp = netdev_priv(dev); |
| ret = 0; |
| accept = 1; |
| |
| netif_stop_queue(dev); |
| |
| /* |
| * stupid GateD insists on setting up the multicast router thru us |
| * and we're ill equipped to handle a non Frame Relay packet at this |
| * time! |
| */ |
| |
| accept = 1; |
| switch (dev->type) |
| { |
| case ARPHRD_FRAD: |
| if (skb->dev->type != ARPHRD_DLCI) |
| { |
| netdev_warn(dev, "Non DLCI device, type %i, tried to send on FRAD module\n", |
| skb->dev->type); |
| accept = 0; |
| } |
| break; |
| default: |
| netdev_warn(dev, "unknown firmware type 0x%04X\n", |
| dev->type); |
| accept = 0; |
| break; |
| } |
| if (accept) |
| { |
| /* this is frame specific, but till there's a PPP module, it's the default */ |
| switch (flp->type) |
| { |
| case SDLA_S502A: |
| case SDLA_S502E: |
| ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, skb->data, skb->len, NULL, NULL); |
| break; |
| case SDLA_S508: |
| size = sizeof(addr); |
| ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, NULL, skb->len, &addr, &size); |
| if (ret == SDLA_RET_OK) |
| { |
| |
| spin_lock_irqsave(&sdla_lock, flags); |
| SDLA_WINDOW(dev, addr); |
| pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK)); |
| __sdla_write(dev, pbuf->buf_addr, skb->data, skb->len); |
| SDLA_WINDOW(dev, addr); |
| pbuf->opp_flag = 1; |
| spin_unlock_irqrestore(&sdla_lock, flags); |
| } |
| break; |
| } |
| |
| switch (ret) |
| { |
| case SDLA_RET_OK: |
| dev->stats.tx_packets++; |
| break; |
| |
| case SDLA_RET_CIR_OVERFLOW: |
| case SDLA_RET_BUF_OVERSIZE: |
| case SDLA_RET_NO_BUFS: |
| dev->stats.tx_dropped++; |
| break; |
| |
| default: |
| dev->stats.tx_errors++; |
| break; |
| } |
| } |
| netif_wake_queue(dev); |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| { |
| if(flp->master[i]!=NULL) |
| netif_wake_queue(flp->master[i]); |
| } |
| |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| static void sdla_receive(struct net_device *dev) |
| { |
| struct net_device *master; |
| struct frad_local *flp; |
| struct dlci_local *dlp; |
| struct sk_buff *skb; |
| |
| struct sdla_cmd *cmd; |
| struct buf_info *pbufi; |
| struct buf_entry *pbuf; |
| |
| unsigned long flags; |
| int i=0, received, success, addr, buf_base, buf_top; |
| short dlci, len, len2, split; |
| |
| flp = netdev_priv(dev); |
| success = 1; |
| received = addr = buf_top = buf_base = 0; |
| len = dlci = 0; |
| skb = NULL; |
| master = NULL; |
| cmd = NULL; |
| pbufi = NULL; |
| pbuf = NULL; |
| |
| spin_lock_irqsave(&sdla_lock, flags); |
| |
| switch (flp->type) |
| { |
| case SDLA_S502A: |
| case SDLA_S502E: |
| cmd = (void *) (dev->mem_start + (SDLA_502_RCV_BUF & SDLA_ADDR_MASK)); |
| SDLA_WINDOW(dev, SDLA_502_RCV_BUF); |
| success = cmd->opp_flag; |
| if (!success) |
| break; |
| |
| dlci = cmd->dlci; |
| len = cmd->length; |
| break; |
| |
| case SDLA_S508: |
| pbufi = (void *) (dev->mem_start + (SDLA_508_RXBUF_INFO & SDLA_ADDR_MASK)); |
| SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO); |
| pbuf = (void *) (dev->mem_start + ((pbufi->rse_base + flp->buffer * sizeof(struct buf_entry)) & SDLA_ADDR_MASK)); |
| success = pbuf->opp_flag; |
| if (!success) |
| break; |
| |
| buf_top = pbufi->buf_top; |
| buf_base = pbufi->buf_base; |
| dlci = pbuf->dlci; |
| len = pbuf->length; |
| addr = pbuf->buf_addr; |
| break; |
| } |
| |
| /* common code, find the DLCI and get the SKB */ |
| if (success) |
| { |
| for (i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->dlci[i] == dlci) |
| break; |
| |
| if (i == CONFIG_DLCI_MAX) |
| { |
| netdev_notice(dev, "Received packet from invalid DLCI %i, ignoring\n", |
| dlci); |
| dev->stats.rx_errors++; |
| success = 0; |
| } |
| } |
| |
| if (success) |
| { |
| master = flp->master[i]; |
| skb = dev_alloc_skb(len + sizeof(struct frhdr)); |
| if (skb == NULL) |
| { |
| netdev_notice(dev, "Memory squeeze, dropping packet\n"); |
| dev->stats.rx_dropped++; |
| success = 0; |
| } |
| else |
| skb_reserve(skb, sizeof(struct frhdr)); |
| } |
| |
| /* pick up the data */ |
| switch (flp->type) |
| { |
| case SDLA_S502A: |
| case SDLA_S502E: |
| if (success) |
| __sdla_read(dev, SDLA_502_RCV_BUF + SDLA_502_DATA_OFS, skb_put(skb,len), len); |
| |
| SDLA_WINDOW(dev, SDLA_502_RCV_BUF); |
| cmd->opp_flag = 0; |
| break; |
| |
| case SDLA_S508: |
| if (success) |
| { |
| /* is this buffer split off the end of the internal ring buffer */ |
| split = addr + len > buf_top + 1 ? len - (buf_top - addr + 1) : 0; |
| len2 = len - split; |
| |
| __sdla_read(dev, addr, skb_put(skb, len2), len2); |
| if (split) |
| __sdla_read(dev, buf_base, skb_put(skb, split), split); |
| } |
| |
| /* increment the buffer we're looking at */ |
| SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO); |
| flp->buffer = (flp->buffer + 1) % pbufi->rse_num; |
| pbuf->opp_flag = 0; |
| break; |
| } |
| |
| if (success) |
| { |
| dev->stats.rx_packets++; |
| dlp = netdev_priv(master); |
| (*dlp->receive)(skb, master); |
| } |
| |
| spin_unlock_irqrestore(&sdla_lock, flags); |
| } |
| |
| static irqreturn_t sdla_isr(int dummy, void *dev_id) |
| { |
| struct net_device *dev; |
| struct frad_local *flp; |
| char byte; |
| |
| dev = dev_id; |
| |
| flp = netdev_priv(dev); |
| |
| if (!flp->initialized) |
| { |
| netdev_warn(dev, "irq %d for uninitialized device\n", dev->irq); |
| return IRQ_NONE; |
| } |
| |
| byte = sdla_byte(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE); |
| switch (byte) |
| { |
| case SDLA_INTR_RX: |
| sdla_receive(dev); |
| break; |
| |
| /* the command will get an error return, which is processed above */ |
| case SDLA_INTR_MODEM: |
| case SDLA_INTR_STATUS: |
| sdla_cmd(dev, SDLA_READ_DLC_STATUS, 0, 0, NULL, 0, NULL, NULL); |
| break; |
| |
| case SDLA_INTR_TX: |
| case SDLA_INTR_COMPLETE: |
| case SDLA_INTR_TIMER: |
| netdev_warn(dev, "invalid irq flag 0x%02X\n", byte); |
| break; |
| } |
| |
| /* the S502E requires a manual acknowledgement of the interrupt */ |
| if (flp->type == SDLA_S502E) |
| { |
| flp->state &= ~SDLA_S502E_INTACK; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| flp->state |= SDLA_S502E_INTACK; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| } |
| |
| /* this clears the byte, informing the Z80 we're done */ |
| byte = 0; |
| sdla_write(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte)); |
| return IRQ_HANDLED; |
| } |
| |
| static void sdla_poll(unsigned long device) |
| { |
| struct net_device *dev; |
| struct frad_local *flp; |
| |
| dev = (struct net_device *) device; |
| flp = netdev_priv(dev); |
| |
| if (sdla_byte(dev, SDLA_502_RCV_BUF)) |
| sdla_receive(dev); |
| |
| flp->timer.expires = 1; |
| add_timer(&flp->timer); |
| } |
| |
| static int sdla_close(struct net_device *dev) |
| { |
| struct frad_local *flp; |
| struct intr_info intr; |
| int len, i; |
| short dlcis[CONFIG_DLCI_MAX]; |
| |
| flp = netdev_priv(dev); |
| |
| len = 0; |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->dlci[i]) |
| dlcis[len++] = abs(flp->dlci[i]); |
| len *= 2; |
| |
| if (flp->config.station == FRAD_STATION_NODE) |
| { |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->dlci[i] > 0) |
| sdla_cmd(dev, SDLA_DEACTIVATE_DLCI, 0, 0, dlcis, len, NULL, NULL); |
| sdla_cmd(dev, SDLA_DELETE_DLCI, 0, 0, &flp->dlci[i], sizeof(flp->dlci[i]), NULL, NULL); |
| } |
| |
| memset(&intr, 0, sizeof(intr)); |
| /* let's start up the reception */ |
| switch(flp->type) |
| { |
| case SDLA_S502A: |
| del_timer(&flp->timer); |
| break; |
| |
| case SDLA_S502E: |
| sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL); |
| flp->state &= ~SDLA_S502E_INTACK; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| break; |
| |
| case SDLA_S507: |
| break; |
| |
| case SDLA_S508: |
| sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL); |
| flp->state &= ~SDLA_S508_INTEN; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| break; |
| } |
| |
| sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); |
| |
| netif_stop_queue(dev); |
| |
| return 0; |
| } |
| |
| struct conf_data { |
| struct frad_conf config; |
| short dlci[CONFIG_DLCI_MAX]; |
| }; |
| |
| static int sdla_open(struct net_device *dev) |
| { |
| struct frad_local *flp; |
| struct dlci_local *dlp; |
| struct conf_data data; |
| struct intr_info intr; |
| int len, i; |
| char byte; |
| |
| flp = netdev_priv(dev); |
| |
| if (!flp->initialized) |
| return -EPERM; |
| |
| if (!flp->configured) |
| return -EPERM; |
| |
| /* time to send in the configuration */ |
| len = 0; |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->dlci[i]) |
| data.dlci[len++] = abs(flp->dlci[i]); |
| len *= 2; |
| |
| memcpy(&data.config, &flp->config, sizeof(struct frad_conf)); |
| len += sizeof(struct frad_conf); |
| |
| sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); |
| sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL); |
| |
| if (flp->type == SDLA_S508) |
| flp->buffer = 0; |
| |
| sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); |
| |
| /* let's start up the reception */ |
| memset(&intr, 0, sizeof(intr)); |
| switch(flp->type) |
| { |
| case SDLA_S502A: |
| flp->timer.expires = 1; |
| add_timer(&flp->timer); |
| break; |
| |
| case SDLA_S502E: |
| flp->state |= SDLA_S502E_ENABLE; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| flp->state |= SDLA_S502E_INTACK; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| byte = 0; |
| sdla_write(dev, SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte)); |
| intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM; |
| sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL); |
| break; |
| |
| case SDLA_S507: |
| break; |
| |
| case SDLA_S508: |
| flp->state |= SDLA_S508_INTEN; |
| outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); |
| byte = 0; |
| sdla_write(dev, SDLA_508_IRQ_INTERFACE, &byte, sizeof(byte)); |
| intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM; |
| intr.irq = dev->irq; |
| sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL); |
| break; |
| } |
| |
| if (flp->config.station == FRAD_STATION_CPE) |
| { |
| byte = SDLA_ICS_STATUS_ENQ; |
| sdla_cmd(dev, SDLA_ISSUE_IN_CHANNEL_SIGNAL, 0, 0, &byte, sizeof(byte), NULL, NULL); |
| } |
| else |
| { |
| sdla_cmd(dev, SDLA_ADD_DLCI, 0, 0, data.dlci, len - sizeof(struct frad_conf), NULL, NULL); |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->dlci[i] > 0) |
| sdla_cmd(dev, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], 2*sizeof(flp->dlci[i]), NULL, NULL); |
| } |
| |
| /* configure any specific DLCI settings */ |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->dlci[i]) |
| { |
| dlp = netdev_priv(flp->master[i]); |
| if (dlp->configured) |
| sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, &dlp->config, sizeof(struct dlci_conf), NULL, NULL); |
| } |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| static int sdla_config(struct net_device *dev, struct frad_conf __user *conf, int get) |
| { |
| struct frad_local *flp; |
| struct conf_data data; |
| int i; |
| short size; |
| |
| if (dev->type == 0xFFFF) |
| return -EUNATCH; |
| |
| flp = netdev_priv(dev); |
| |
| if (!get) |
| { |
| if (netif_running(dev)) |
| return -EBUSY; |
| |
| if(copy_from_user(&data.config, conf, sizeof(struct frad_conf))) |
| return -EFAULT; |
| |
| if (data.config.station & ~FRAD_STATION_NODE) |
| return -EINVAL; |
| |
| if (data.config.flags & ~FRAD_VALID_FLAGS) |
| return -EINVAL; |
| |
| if ((data.config.kbaud < 0) || |
| ((data.config.kbaud > 128) && (flp->type != SDLA_S508))) |
| return -EINVAL; |
| |
| if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232)) |
| return -EINVAL; |
| |
| if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU)) |
| return -EINVAL; |
| |
| if ((data.config.T391 < 5) || (data.config.T391 > 30)) |
| return -EINVAL; |
| |
| if ((data.config.T392 < 5) || (data.config.T392 > 30)) |
| return -EINVAL; |
| |
| if ((data.config.N391 < 1) || (data.config.N391 > 255)) |
| return -EINVAL; |
| |
| if ((data.config.N392 < 1) || (data.config.N392 > 10)) |
| return -EINVAL; |
| |
| if ((data.config.N393 < 1) || (data.config.N393 > 10)) |
| return -EINVAL; |
| |
| memcpy(&flp->config, &data.config, sizeof(struct frad_conf)); |
| flp->config.flags |= SDLA_DIRECT_RECV; |
| |
| if (flp->type == SDLA_S508) |
| flp->config.flags |= SDLA_TX70_RX30; |
| |
| if (dev->mtu != flp->config.mtu) |
| { |
| /* this is required to change the MTU */ |
| dev->mtu = flp->config.mtu; |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->master[i]) |
| flp->master[i]->mtu = flp->config.mtu; |
| } |
| |
| flp->config.mtu += sizeof(struct frhdr); |
| |
| /* off to the races! */ |
| if (!flp->configured) |
| sdla_start(dev); |
| |
| flp->configured = 1; |
| } |
| else |
| { |
| /* no sense reading if the CPU isn't started */ |
| if (netif_running(dev)) |
| { |
| size = sizeof(data); |
| if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK) |
| return -EIO; |
| } |
| else |
| if (flp->configured) |
| memcpy(&data.config, &flp->config, sizeof(struct frad_conf)); |
| else |
| memset(&data.config, 0, sizeof(struct frad_conf)); |
| |
| memcpy(&flp->config, &data.config, sizeof(struct frad_conf)); |
| data.config.flags &= FRAD_VALID_FLAGS; |
| data.config.mtu -= data.config.mtu > sizeof(struct frhdr) ? sizeof(struct frhdr) : data.config.mtu; |
| return copy_to_user(conf, &data.config, sizeof(struct frad_conf))?-EFAULT:0; |
| } |
| |
| return 0; |
| } |
| |
| static int sdla_xfer(struct net_device *dev, struct sdla_mem __user *info, int read) |
| { |
| struct sdla_mem mem; |
| char *temp; |
| |
| if(copy_from_user(&mem, info, sizeof(mem))) |
| return -EFAULT; |
| |
| if (read) |
| { |
| temp = kzalloc(mem.len, GFP_KERNEL); |
| if (!temp) |
| return -ENOMEM; |
| sdla_read(dev, mem.addr, temp, mem.len); |
| if(copy_to_user(mem.data, temp, mem.len)) |
| { |
| kfree(temp); |
| return -EFAULT; |
| } |
| kfree(temp); |
| } |
| else |
| { |
| temp = memdup_user(mem.data, mem.len); |
| if (IS_ERR(temp)) |
| return PTR_ERR(temp); |
| sdla_write(dev, mem.addr, temp, mem.len); |
| kfree(temp); |
| } |
| return 0; |
| } |
| |
| static int sdla_reconfig(struct net_device *dev) |
| { |
| struct frad_local *flp; |
| struct conf_data data; |
| int i, len; |
| |
| flp = netdev_priv(dev); |
| |
| len = 0; |
| for(i=0;i<CONFIG_DLCI_MAX;i++) |
| if (flp->dlci[i]) |
| data.dlci[len++] = flp->dlci[i]; |
| len *= 2; |
| |
| memcpy(&data, &flp->config, sizeof(struct frad_conf)); |
| len += sizeof(struct frad_conf); |
| |
| sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); |
| sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL); |
| sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); |
| |
| return 0; |
| } |
| |
| static int sdla_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| struct frad_local *flp; |
| |
| if(!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| flp = netdev_priv(dev); |
| |
| if (!flp->initialized) |
| return -EINVAL; |
| |
| switch (cmd) |
| { |
| case FRAD_GET_CONF: |
| case FRAD_SET_CONF: |
| return sdla_config(dev, ifr->ifr_data, cmd == FRAD_GET_CONF); |
| |
| case SDLA_IDENTIFY: |
| ifr->ifr_flags = flp->type; |
| break; |
| |
| case SDLA_CPUSPEED: |
| return sdla_cpuspeed(dev, ifr); |
| |
| /* ========================================================== |
| NOTE: This is rather a useless action right now, as the |
| current driver does not support protocols other than |
| FR. However, Sangoma has modules for a number of |
| other protocols in the works. |
| ============================================================*/ |
| case SDLA_PROTOCOL: |
| if (flp->configured) |
| return -EALREADY; |
| |
| switch (ifr->ifr_flags) |
| { |
| case ARPHRD_FRAD: |
| dev->type = ifr->ifr_flags; |
| break; |
| default: |
| return -ENOPROTOOPT; |
| } |
| break; |
| |
| case SDLA_CLEARMEM: |
| sdla_clear(dev); |
| break; |
| |
| case SDLA_WRITEMEM: |
| case SDLA_READMEM: |
| if(!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| return sdla_xfer(dev, ifr->ifr_data, cmd == SDLA_READMEM); |
| |
| case SDLA_START: |
| sdla_start(dev); |
| break; |
| |
| case SDLA_STOP: |
| sdla_stop(dev); |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| static int sdla_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| if (netif_running(dev)) |
| return -EBUSY; |
| |
| /* for now, you can't change the MTU! */ |
| return -EOPNOTSUPP; |
| } |
| |
| static int sdla_set_config(struct net_device *dev, struct ifmap *map) |
| { |
| struct frad_local *flp; |
| int i; |
| char byte; |
| unsigned base; |
| int err = -EINVAL; |
| |
| flp = netdev_priv(dev); |
| |
| if (flp->initialized) |
| return -EINVAL; |
| |
| for(i=0; i < ARRAY_SIZE(valid_port); i++) |
| if (valid_port[i] == map->base_addr) |
| break; |
| |
| if (i == ARRAY_SIZE(valid_port)) |
| return -EINVAL; |
| |
| if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){ |
| pr_warn("io-port 0x%04lx in use\n", dev->base_addr); |
| return -EINVAL; |
| } |
| base = map->base_addr; |
| |
| /* test for card types, S502A, S502E, S507, S508 */ |
| /* these tests shut down the card completely, so clear the state */ |
| flp->type = SDLA_UNKNOWN; |
| flp->state = 0; |
| |
| for(i=1;i<SDLA_IO_EXTENTS;i++) |
| if (inb(base + i) != 0xFF) |
| break; |
| |
| if (i == SDLA_IO_EXTENTS) { |
| outb(SDLA_HALT, base + SDLA_REG_Z80_CONTROL); |
| if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x08) { |
| outb(SDLA_S502E_INTACK, base + SDLA_REG_CONTROL); |
| if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x0C) { |
| outb(SDLA_HALT, base + SDLA_REG_CONTROL); |
| flp->type = SDLA_S502E; |
| goto got_type; |
| } |
| } |
| } |
| |
| for(byte=inb(base),i=0;i<SDLA_IO_EXTENTS;i++) |
| if (inb(base + i) != byte) |
| break; |
| |
| if (i == SDLA_IO_EXTENTS) { |
| outb(SDLA_HALT, base + SDLA_REG_CONTROL); |
| if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x30) { |
| outb(SDLA_S507_ENABLE, base + SDLA_REG_CONTROL); |
| if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x32) { |
| outb(SDLA_HALT, base + SDLA_REG_CONTROL); |
| flp->type = SDLA_S507; |
| goto got_type; |
| } |
| } |
| } |
| |
| outb(SDLA_HALT, base + SDLA_REG_CONTROL); |
| if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x00) { |
| outb(SDLA_S508_INTEN, base + SDLA_REG_CONTROL); |
| if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x10) { |
| outb(SDLA_HALT, base + SDLA_REG_CONTROL); |
| flp->type = SDLA_S508; |
| goto got_type; |
| } |
| } |
| |
| outb(SDLA_S502A_HALT, base + SDLA_REG_CONTROL); |
| if (inb(base + SDLA_S502_STS) == 0x40) { |
| outb(SDLA_S502A_START, base + SDLA_REG_CONTROL); |
| if (inb(base + SDLA_S502_STS) == 0x40) { |
| outb(SDLA_S502A_INTEN, base + SDLA_REG_CONTROL); |
| if (inb(base + SDLA_S502_STS) == 0x44) { |
| outb(SDLA_S502A_START, base + SDLA_REG_CONTROL); |
| flp->type = SDLA_S502A; |
| goto got_type; |
| } |
| } |
| } |
| |
| netdev_notice(dev, "Unknown card type\n"); |
| err = -ENODEV; |
| goto fail; |
| |
| got_type: |
| switch(base) { |
| case 0x270: |
| case 0x280: |
| case 0x380: |
| case 0x390: |
| if (flp->type != SDLA_S508 && flp->type != SDLA_S507) |
| goto fail; |
| } |
| |
| switch (map->irq) { |
| case 2: |
| if (flp->type != SDLA_S502E) |
| goto fail; |
| break; |
| |
| case 10: |
| case 11: |
| case 12: |
| case 15: |
| case 4: |
| if (flp->type != SDLA_S508 && flp->type != SDLA_S507) |
| goto fail; |
| break; |
| case 3: |
| case 5: |
| case 7: |
| if (flp->type == SDLA_S502A) |
| goto fail; |
| break; |
| |
| default: |
| goto fail; |
| } |
| |
| err = -EAGAIN; |
| if (request_irq(dev->irq, sdla_isr, 0, dev->name, dev)) |
| goto fail; |
| |
| if (flp->type == SDLA_S507) { |
| switch(dev->irq) { |
| case 3: |
| flp->state = SDLA_S507_IRQ3; |
| break; |
| case 4: |
| flp->state = SDLA_S507_IRQ4; |
| break; |
| case 5: |
| flp->state = SDLA_S507_IRQ5; |
| break; |
| case 7: |
| flp->state = SDLA_S507_IRQ7; |
| break; |
| case 10: |
| flp->state = SDLA_S507_IRQ10; |
| break; |
| case 11: |
| flp->state = SDLA_S507_IRQ11; |
| break; |
| case 12: |
| flp->state = SDLA_S507_IRQ12; |
| break; |
| case 15: |
| flp->state = SDLA_S507_IRQ15; |
| break; |
| } |
| } |
| |
| for(i=0; i < ARRAY_SIZE(valid_mem); i++) |
| if (valid_mem[i] == map->mem_start) |
| break; |
| |
| err = -EINVAL; |
| if (i == ARRAY_SIZE(valid_mem)) |
| goto fail2; |
| |
| if (flp->type == SDLA_S502A && (map->mem_start & 0xF000) >> 12 == 0x0E) |
| goto fail2; |
| |
| if (flp->type != SDLA_S507 && map->mem_start >> 16 == 0x0B) |
| goto fail2; |
| |
| if (flp->type == SDLA_S507 && map->mem_start >> 16 == 0x0D) |
| goto fail2; |
| |
| byte = flp->type != SDLA_S508 ? SDLA_8K_WINDOW : 0; |
| byte |= (map->mem_start & 0xF000) >> (12 + (flp->type == SDLA_S508 ? 1 : 0)); |
| switch(flp->type) { |
| case SDLA_S502A: |
| case SDLA_S502E: |
| switch (map->mem_start >> 16) { |
| case 0x0A: |
| byte |= SDLA_S502_SEG_A; |
| break; |
| case 0x0C: |
| byte |= SDLA_S502_SEG_C; |
| break; |
| case 0x0D: |
| byte |= SDLA_S502_SEG_D; |
| break; |
| case 0x0E: |
| byte |= SDLA_S502_SEG_E; |
| break; |
| } |
| break; |
| case SDLA_S507: |
| switch (map->mem_start >> 16) { |
| case 0x0A: |
| byte |= SDLA_S507_SEG_A; |
| break; |
| case 0x0B: |
| byte |= SDLA_S507_SEG_B; |
| break; |
| case 0x0C: |
| byte |= SDLA_S507_SEG_C; |
| break; |
| case 0x0E: |
| byte |= SDLA_S507_SEG_E; |
| break; |
| } |
| break; |
| case SDLA_S508: |
| switch (map->mem_start >> 16) { |
| case 0x0A: |
| byte |= SDLA_S508_SEG_A; |
| break; |
| case 0x0C: |
| byte |= SDLA_S508_SEG_C; |
| break; |
| case 0x0D: |
| byte |= SDLA_S508_SEG_D; |
| break; |
| case 0x0E: |
| byte |= SDLA_S508_SEG_E; |
| break; |
| } |
| break; |
| } |
| |
| /* set the memory bits, and enable access */ |
| outb(byte, base + SDLA_REG_PC_WINDOW); |
| |
| switch(flp->type) |
| { |
| case SDLA_S502E: |
| flp->state = SDLA_S502E_ENABLE; |
| break; |
| case SDLA_S507: |
| flp->state |= SDLA_MEMEN; |
| break; |
| case SDLA_S508: |
| flp->state = SDLA_MEMEN; |
| break; |
| } |
| outb(flp->state, base + SDLA_REG_CONTROL); |
| |
| dev->irq = map->irq; |
| dev->base_addr = base; |
| dev->mem_start = map->mem_start; |
| dev->mem_end = dev->mem_start + 0x2000; |
| flp->initialized = 1; |
| return 0; |
| |
| fail2: |
| free_irq(map->irq, dev); |
| fail: |
| release_region(base, SDLA_IO_EXTENTS); |
| return err; |
| } |
| |
| static const struct net_device_ops sdla_netdev_ops = { |
| .ndo_open = sdla_open, |
| .ndo_stop = sdla_close, |
| .ndo_do_ioctl = sdla_ioctl, |
| .ndo_set_config = sdla_set_config, |
| .ndo_start_xmit = sdla_transmit, |
| .ndo_change_mtu = sdla_change_mtu, |
| }; |
| |
| static void setup_sdla(struct net_device *dev) |
| { |
| struct frad_local *flp = netdev_priv(dev); |
| |
| netdev_boot_setup_check(dev); |
| |
| dev->netdev_ops = &sdla_netdev_ops; |
| dev->flags = 0; |
| dev->type = 0xFFFF; |
| dev->hard_header_len = 0; |
| dev->addr_len = 0; |
| dev->mtu = SDLA_MAX_MTU; |
| |
| flp->activate = sdla_activate; |
| flp->deactivate = sdla_deactivate; |
| flp->assoc = sdla_assoc; |
| flp->deassoc = sdla_deassoc; |
| flp->dlci_conf = sdla_dlci_conf; |
| |
| init_timer(&flp->timer); |
| flp->timer.expires = 1; |
| flp->timer.data = (unsigned long) dev; |
| flp->timer.function = sdla_poll; |
| } |
| |
| static struct net_device *sdla; |
| |
| static int __init init_sdla(void) |
| { |
| int err; |
| |
| printk("%s.\n", version); |
| |
| sdla = alloc_netdev(sizeof(struct frad_local), "sdla0", setup_sdla); |
| if (!sdla) |
| return -ENOMEM; |
| |
| err = register_netdev(sdla); |
| if (err) |
| free_netdev(sdla); |
| |
| return err; |
| } |
| |
| static void __exit exit_sdla(void) |
| { |
| struct frad_local *flp = netdev_priv(sdla); |
| |
| unregister_netdev(sdla); |
| if (flp->initialized) { |
| free_irq(sdla->irq, sdla); |
| release_region(sdla->base_addr, SDLA_IO_EXTENTS); |
| } |
| del_timer_sync(&flp->timer); |
| free_netdev(sdla); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| |
| module_init(init_sdla); |
| module_exit(exit_sdla); |