[media] V4L: ov9740: Fixed some settings
Based on vendor feedback, should issue a software reset at start of day.
Also, OV9740_ANALOG_CTRL15 needs to be changed so the sensor does not begin
streaming until it is ready (otherwise, results in a nonsense frame for the
initial frame).
Added a comment on using discontinuous clock.
Finally, OV9740_ISP_CTRL19 needs to be changed to really use YUYV ordering
(the previous value was for VYUY).
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c
index d5c9061..72c6ac1 100644
--- a/drivers/media/video/ov9740.c
+++ b/drivers/media/video/ov9740.c
@@ -68,6 +68,7 @@
#define OV9740_ANALOG_CTRL04 0x3604
#define OV9740_ANALOG_CTRL10 0x3610
#define OV9740_ANALOG_CTRL12 0x3612
+#define OV9740_ANALOG_CTRL15 0x3615
#define OV9740_ANALOG_CTRL20 0x3620
#define OV9740_ANALOG_CTRL21 0x3621
#define OV9740_ANALOG_CTRL22 0x3622
@@ -222,6 +223,9 @@
};
static const struct ov9740_reg ov9740_defaults[] = {
+ /* Software Reset */
+ { OV9740_SOFTWARE_RESET, 0x01 },
+
/* Banding Filter */
{ OV9740_AEC_B50_STEP_HI, 0x00 },
{ OV9740_AEC_B50_STEP_LO, 0xe8 },
@@ -333,6 +337,7 @@
{ OV9740_ANALOG_CTRL10, 0xa1 },
{ OV9740_ANALOG_CTRL12, 0x24 },
{ OV9740_ANALOG_CTRL22, 0x9f },
+ { OV9740_ANALOG_CTRL15, 0xf0 },
/* Sensor Control */
{ OV9740_SENSOR_CTRL03, 0x42 },
@@ -385,7 +390,7 @@
{ OV9740_LN_LENGTH_PCK_LO, 0x62 },
/* MIPI Control */
- { OV9740_MIPI_CTRL00, 0x44 },
+ { OV9740_MIPI_CTRL00, 0x44 }, /* 0x64 for discontinuous clk */
{ OV9740_MIPI_3837, 0x01 },
{ OV9740_MIPI_CTRL01, 0x0f },
{ OV9740_MIPI_CTRL03, 0x05 },
@@ -393,6 +398,9 @@
{ OV9740_VFIFO_RD_CTRL, 0x16 },
{ OV9740_MIPI_CTRL_3012, 0x70 },
{ OV9740_SC_CMMM_MIPI_CTR, 0x01 },
+
+ /* YUYV order */
+ { OV9740_ISP_CTRL19, 0x02 },
};
static const struct ov9740_reg ov9740_regs_vga[] = {