drivers/net/wireless/rtlwifi/debug.h - kernel/msm-4.9 - Gitiles

 /******************************************************************************
  *
  * Copyright(c) 2009-2012  Realtek Corporation.
  *
  * Tmis program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * Tmis program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * tmis program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
  * Tme full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
  * Contact Information:
  * wlanfae <wlanfae@realtek.com>
  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  * Hsinchu 300, Taiwan.
  *
  * Larry Finger <Larry.Finger@lwfinger.net>
  *****************************************************************************/

 #ifndef __RTL_DEBUG_H__
 #define __RTL_DEBUG_H__

 /*--------------------------------------------------------------
 			Debug level
 --------------------------------------------------------------*/
 /*
  *Fatal bug.
  *For example, Tx/Rx/IO locked up,
  *memory access violation,
  *resource allocation failed,
  *unexpected HW behavior, HW BUG
  *and so on.
  */
 #define DBG_EMERG			0

 /*
  *Abnormal, rare, or unexpeted cases.
  *For example, Packet/IO Ctl canceled,
  *device suprisely unremoved and so on.
  */
 #define	DBG_WARNING			2

 /*
  *Normal case driver developer should
  *open, we can see link status like
  *assoc/AddBA/DHCP/adapter start and
  *so on basic and useful infromations.
  */
 #define DBG_DMESG			3

 /*
  *Normal case with useful information
  *about current SW or HW state.
  *For example, Tx/Rx descriptor to fill,
  *Tx/Rx descriptor completed status,
  *SW protocol state change, dynamic
  *mechanism state change and so on.
  */
 #define DBG_LOUD			4

 /*
  *Normal case with detail execution
  *flow or information.
  */
 #define	DBG_TRACE			5

 /*--------------------------------------------------------------
 		Define the rt_trace components
 --------------------------------------------------------------*/
 #define COMP_ERR			BIT(0)
 #define COMP_FW				BIT(1)
 #define COMP_INIT			BIT(2)	/*For init/deinit */
 #define COMP_RECV			BIT(3)	/*For Rx. */
 #define COMP_SEND			BIT(4)	/*For Tx. */
 #define COMP_MLME			BIT(5)	/*For MLME. */
 #define COMP_SCAN			BIT(6)	/*For Scan. */
 #define COMP_INTR			BIT(7)	/*For interrupt Related. */
 #define COMP_LED			BIT(8)	/*For LED. */
 #define COMP_SEC			BIT(9)	/*For sec. */
 #define COMP_BEACON			BIT(10)	/*For beacon. */
 #define COMP_RATE			BIT(11)	/*For rate. */
 #define COMP_RXDESC			BIT(12)	/*For rx desc. */
 #define COMP_DIG			BIT(13)	/*For DIG */
 #define COMP_TXAGC			BIT(14)	/*For Tx power */
 #define COMP_HIPWR			BIT(15)	/*For High Power Mechanism */
 #define COMP_POWER			BIT(16)	/*For lps/ips/aspm. */
 #define COMP_POWER_TRACKING	BIT(17)	/*For TX POWER TRACKING */
 #define COMP_BB_POWERSAVING	BIT(18)
 #define COMP_SWAS			BIT(19)	/*For SW Antenna Switch */
 #define COMP_RF				BIT(20)	/*For RF. */
 #define COMP_TURBO			BIT(21)	/*For EDCA TURBO. */
 #define COMP_RATR			BIT(22)
 #define COMP_CMD			BIT(23)
 #define COMP_EFUSE			BIT(24)
 #define COMP_QOS			BIT(25)
 #define COMP_MAC80211		BIT(26)
 #define COMP_REGD			BIT(27)
 #define COMP_CHAN			BIT(28)
 #define COMP_USB			BIT(29)

 /*--------------------------------------------------------------
 		Define the rt_print components
 --------------------------------------------------------------*/
 /* Define EEPROM and EFUSE  check module bit*/
 #define EEPROM_W			BIT(0)
 #define EFUSE_PG			BIT(1)
 #define EFUSE_READ_ALL		BIT(2)

 /* Define init check for module bit*/
 #define	INIT_EEPROM			BIT(0)
 #define	INIT_TxPower		BIT(1)
 #define	INIT_IQK			BIT(2)
 #define	INIT_RF				BIT(3)

 /* Define PHY-BB/RF/MAC check module bit */
 #define	PHY_BBR				BIT(0)
 #define	PHY_BBW				BIT(1)
 #define	PHY_RFR				BIT(2)
 #define	PHY_RFW				BIT(3)
 #define	PHY_MACR			BIT(4)
 #define	PHY_MACW			BIT(5)
 #define	PHY_ALLR			BIT(6)
 #define	PHY_ALLW			BIT(7)
 #define	PHY_TXPWR			BIT(8)
 #define	PHY_PWRDIFF			BIT(9)

 enum dbgp_flag_e {
 	FQOS = 0,
 	FTX = 1,
 	FRX = 2,
 	FSEC = 3,
 	FMGNT = 4,
 	FMLME = 5,
 	FRESOURCE = 6,
 	FBEACON = 7,
 	FISR = 8,
 	FPHY = 9,
 	FMP = 10,
 	FEEPROM = 11,
 	FPWR = 12,
 	FDM = 13,
 	FDBGCtrl = 14,
 	FC2H = 15,
 	FBT = 16,
 	FINIT = 17,
 	FIOCTL = 18,
 	DBGP_TYPE_MAX
 };

 #ifdef CONFIG_RTLWIFI_DEBUG

 #define RT_ASSERT(_exp, fmt, ...)					\
 do {									\
 	if (!(_exp)) {							\
 		printk(KERN_DEBUG KBUILD_MODNAME ":%s(): " fmt,		\
 		       __func__, ##__VA_ARGS__);			\
 	}								\
 } while (0)

 #define RT_TRACE(rtlpriv, comp, level, fmt, ...)			\
 do {									\
 	if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) &&	\
 		     ((level) <= rtlpriv->dbg.global_debuglevel))) {	\
 		printk(KERN_DEBUG KBUILD_MODNAME ":%s():<%lx-%x> " fmt,	\
 		       __func__, in_interrupt(), in_atomic(),		\
 		       ##__VA_ARGS__);					\
 	}								\
 } while (0)

 #define RTPRINT(rtlpriv, dbgtype, dbgflag, fmt, ...)			\
 do {									\
 	if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) {	\
 		printk(KERN_DEBUG KBUILD_MODNAME ": " fmt,		\
 		       ##__VA_ARGS__);					\
 	}								\
 } while (0)

 #define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata,	\
 		      _hexdatalen)					\
 do {									\
 	if (unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents) &&	\
 		     (_level <= rtlpriv->dbg.global_debuglevel))) {	\
 		printk(KERN_DEBUG "%s: In process \"%s\" (pid %i): %s\n", \
 		       KBUILD_MODNAME, current->comm, current->pid,	\
 		       _titlestring);					\
 		print_hex_dump_bytes("", DUMP_PREFIX_NONE,		\
 				     _hexdata, _hexdatalen);		\
 	}								\
 } while (0)

 #else

 struct rtl_priv;

 __printf(2, 3)
 static inline void RT_ASSERT(int exp, const char *fmt, ...)
 {
 }

 __printf(4, 5)
 static inline void RT_TRACE(struct rtl_priv *rtlpriv,
 			    int comp, int level,
 			    const char *fmt, ...)
 {
 }

 __printf(4, 5)
 static inline void RTPRINT(struct rtl_priv *rtlpriv,
 			   int dbgtype, int dbgflag,
 			   const char *fmt, ...)
 {
 }

 static inline void RT_PRINT_DATA(struct rtl_priv *rtlpriv,
 				 int comp, int level,
 				 const char *titlestring,
 				 const void *hexdata, size_t hexdatalen)
 {
 }

 #endif

 void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
 #endif
	/******************************************************************************
	*
	* Copyright(c) 2009-2012 Realtek Corporation.
	*
	* Tmis program is free software; you can redistribute it and/or modify it
	* under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* Tmis program is distributed in the hope that it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* tmis program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
	*
	* Tme full GNU General Public License is included in this distribution in the
	* file called LICENSE.
	*
	* Contact Information:
	* wlanfae <wlanfae@realtek.com>
	* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
	* Hsinchu 300, Taiwan.
	*
	* Larry Finger <Larry.Finger@lwfinger.net>
	*****************************************************************************/

	#ifndef __RTL_DEBUG_H__
	#define __RTL_DEBUG_H__

	/*--------------------------------------------------------------
	Debug level
	--------------------------------------------------------------*/
	/*
	*Fatal bug.
	*For example, Tx/Rx/IO locked up,
	*memory access violation,
	*resource allocation failed,
	*unexpected HW behavior, HW BUG
	*and so on.
	*/
	#define DBG_EMERG 0

	/*
	*Abnormal, rare, or unexpeted cases.
	*For example, Packet/IO Ctl canceled,
	*device suprisely unremoved and so on.
	*/
	#define DBG_WARNING 2

	/*
	*Normal case driver developer should
	*open, we can see link status like
	*assoc/AddBA/DHCP/adapter start and
	*so on basic and useful infromations.
	*/
	#define DBG_DMESG 3

	/*
	*Normal case with useful information
	*about current SW or HW state.
	*For example, Tx/Rx descriptor to fill,
	*Tx/Rx descriptor completed status,
	*SW protocol state change, dynamic
	*mechanism state change and so on.
	*/
	#define DBG_LOUD 4

	/*
	*Normal case with detail execution
	*flow or information.
	*/
	#define DBG_TRACE 5

	/*--------------------------------------------------------------
	Define the rt_trace components
	--------------------------------------------------------------*/
	#define COMP_ERR BIT(0)
	#define COMP_FW BIT(1)
	#define COMP_INIT BIT(2) /For init/deinit /
	#define COMP_RECV BIT(3) /For Rx. /
	#define COMP_SEND BIT(4) /For Tx. /
	#define COMP_MLME BIT(5) /For MLME. /
	#define COMP_SCAN BIT(6) /For Scan. /
	#define COMP_INTR BIT(7) /For interrupt Related. /
	#define COMP_LED BIT(8) /For LED. /
	#define COMP_SEC BIT(9) /For sec. /
	#define COMP_BEACON BIT(10) /For beacon. /
	#define COMP_RATE BIT(11) /For rate. /
	#define COMP_RXDESC BIT(12) /For rx desc. /
	#define COMP_DIG BIT(13) /For DIG /
	#define COMP_TXAGC BIT(14) /For Tx power /
	#define COMP_HIPWR BIT(15) /For High Power Mechanism /
	#define COMP_POWER BIT(16) /For lps/ips/aspm. /
	#define COMP_POWER_TRACKING BIT(17) /For TX POWER TRACKING /
	#define COMP_BB_POWERSAVING BIT(18)
	#define COMP_SWAS BIT(19) /For SW Antenna Switch /
	#define COMP_RF BIT(20) /For RF. /
	#define COMP_TURBO BIT(21) /For EDCA TURBO. /
	#define COMP_RATR BIT(22)
	#define COMP_CMD BIT(23)
	#define COMP_EFUSE BIT(24)
	#define COMP_QOS BIT(25)
	#define COMP_MAC80211 BIT(26)
	#define COMP_REGD BIT(27)
	#define COMP_CHAN BIT(28)
	#define COMP_USB BIT(29)

	/*--------------------------------------------------------------
	Define the rt_print components
	--------------------------------------------------------------*/
	/* Define EEPROM and EFUSE check module bit*/
	#define EEPROM_W BIT(0)
	#define EFUSE_PG BIT(1)
	#define EFUSE_READ_ALL BIT(2)

	/* Define init check for module bit*/
	#define INIT_EEPROM BIT(0)
	#define INIT_TxPower BIT(1)
	#define INIT_IQK BIT(2)
	#define INIT_RF BIT(3)

	/* Define PHY-BB/RF/MAC check module bit */
	#define PHY_BBR BIT(0)
	#define PHY_BBW BIT(1)
	#define PHY_RFR BIT(2)
	#define PHY_RFW BIT(3)
	#define PHY_MACR BIT(4)
	#define PHY_MACW BIT(5)
	#define PHY_ALLR BIT(6)
	#define PHY_ALLW BIT(7)
	#define PHY_TXPWR BIT(8)
	#define PHY_PWRDIFF BIT(9)

	enum dbgp_flag_e {
	FQOS = 0,
	FTX = 1,
	FRX = 2,
	FSEC = 3,
	FMGNT = 4,
	FMLME = 5,
	FRESOURCE = 6,
	FBEACON = 7,
	FISR = 8,
	FPHY = 9,
	FMP = 10,
	FEEPROM = 11,
	FPWR = 12,
	FDM = 13,
	FDBGCtrl = 14,
	FC2H = 15,
	FBT = 16,
	FINIT = 17,
	FIOCTL = 18,
	DBGP_TYPE_MAX
	};

	#ifdef CONFIG_RTLWIFI_DEBUG

	#define RT_ASSERT(_exp, fmt, ...) \
	do { \
	if (!(_exp)) { \
	printk(KERN_DEBUG KBUILD_MODNAME ":%s(): " fmt, \
	__func__, ##__VA_ARGS__); \
	} \
	} while (0)

	#define RT_TRACE(rtlpriv, comp, level, fmt, ...) \
	do { \
	if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \
	((level) <= rtlpriv->dbg.global_debuglevel))) { \
	printk(KERN_DEBUG KBUILD_MODNAME ":%s():<%lx-%x> " fmt, \
	__func__, in_interrupt(), in_atomic(), \
	##__VA_ARGS__); \
	} \
	} while (0)

	#define RTPRINT(rtlpriv, dbgtype, dbgflag, fmt, ...) \
	do { \
	if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \
	printk(KERN_DEBUG KBUILD_MODNAME ": " fmt, \
	##__VA_ARGS__); \
	} \
	} while (0)

	#define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \
	_hexdatalen) \
	do { \
	if (unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents) && \
	(_level <= rtlpriv->dbg.global_debuglevel))) { \
	printk(KERN_DEBUG "%s: In process \"%s\" (pid %i): %s\n", \
	KBUILD_MODNAME, current->comm, current->pid, \
	_titlestring); \
	print_hex_dump_bytes("", DUMP_PREFIX_NONE, \
	_hexdata, _hexdatalen); \
	} \
	} while (0)

	#else

	struct rtl_priv;

	__printf(2, 3)
	static inline void RT_ASSERT(int exp, const char *fmt, ...)
	{
	}

	__printf(4, 5)
	static inline void RT_TRACE(struct rtl_priv *rtlpriv,
	int comp, int level,
	const char *fmt, ...)
	{
	}

	__printf(4, 5)
	static inline void RTPRINT(struct rtl_priv *rtlpriv,
	int dbgtype, int dbgflag,
	const char *fmt, ...)
	{
	}

	static inline void RT_PRINT_DATA(struct rtl_priv *rtlpriv,
	int comp, int level,
	const char *titlestring,
	const void *hexdata, size_t hexdatalen)
	{
	}

	#endif

	void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
	#endif