iwlagn: 2000 series devices support
Adding 2000 series devices supports, the 2000 series devices has
many different SKUs which includes 1x1 and 2x2 devices,also with
and without BT combo.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
new file mode 100644
index 0000000..3c9e1b5
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -0,0 +1,556 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-sta.h"
+#include "iwl-agn.h"
+#include "iwl-helpers.h"
+#include "iwl-agn-hw.h"
+#include "iwl-6000-hw.h"
+#include "iwl-agn-led.h"
+#include "iwl-agn-debugfs.h"
+
+/* Highest firmware API version supported */
+#define IWL2030_UCODE_API_MAX 5
+#define IWL2000_UCODE_API_MAX 5
+#define IWL200_UCODE_API_MAX 5
+
+/* Lowest firmware API version supported */
+#define IWL2030_UCODE_API_MIN 5
+#define IWL2000_UCODE_API_MIN 5
+#define IWL200_UCODE_API_MIN 5
+
+#define IWL2030_FW_PRE "iwlwifi-2030-"
+#define _IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE #api ".ucode"
+#define IWL2030_MODULE_FIRMWARE(api) _IWL2030_MODULE_FIRMWARE(api)
+
+#define IWL2000_FW_PRE "iwlwifi-2000-"
+#define _IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE #api ".ucode"
+#define IWL2000_MODULE_FIRMWARE(api) _IWL2000_MODULE_FIRMWARE(api)
+
+#define IWL200_FW_PRE "iwlwifi-200-"
+#define _IWL200_MODULE_FIRMWARE(api) IWL200_FW_PRE #api ".ucode"
+#define IWL200_MODULE_FIRMWARE(api) _IWL200_MODULE_FIRMWARE(api)
+
+static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+ priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 2000 series */
+static void iwl2000_nic_config(struct iwl_priv *priv)
+{
+ u16 radio_cfg;
+
+ radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
+
+ /* write radio config values to register */
+ if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
+ EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
+ EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+
+ /* set CSR_HW_CONFIG_REG for uCode use */
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+ CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
+}
+
+static struct iwl_sensitivity_ranges iwl2000_sensitivity = {
+ .min_nrg_cck = 97,
+ .max_nrg_cck = 0, /* not used, set to 0 */
+ .auto_corr_min_ofdm = 80,
+ .auto_corr_min_ofdm_mrc = 128,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 192,
+
+ .auto_corr_max_ofdm = 145,
+ .auto_corr_max_ofdm_mrc = 232,
+ .auto_corr_max_ofdm_x1 = 110,
+ .auto_corr_max_ofdm_mrc_x1 = 232,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 175,
+ .auto_corr_min_cck_mrc = 160,
+ .auto_corr_max_cck_mrc = 310,
+ .nrg_th_cck = 97,
+ .nrg_th_ofdm = 100,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 390,
+ .nrg_th_cca = 62,
+};
+
+static int iwl2000_hw_set_hw_params(struct iwl_priv *priv)
+{
+ if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ priv->cfg->base_params->num_of_queues =
+ priv->cfg->mod_params->num_of_queues;
+
+ priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
+ priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+ priv->hw_params.scd_bc_tbls_size =
+ priv->cfg->base_params->num_of_queues *
+ sizeof(struct iwlagn_scd_bc_tbl);
+ priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+ priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
+ priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
+
+ priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
+ priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
+
+ priv->hw_params.max_bsm_size = 0;
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ BIT(IEEE80211_BAND_5GHZ);
+ priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+ priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+ if (priv->cfg->rx_with_siso_diversity)
+ priv->hw_params.rx_chains_num = 1;
+ else
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->cfg->valid_rx_ant);
+ priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+ priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+ iwl2000_set_ct_threshold(priv);
+
+ /* Set initial sensitivity parameters */
+ /* Set initial calibration set */
+ priv->hw_params.sens = &iwl2000_sensitivity;
+ priv->hw_params.calib_init_cfg =
+ BIT(IWL_CALIB_XTAL) |
+ BIT(IWL_CALIB_LO) |
+ BIT(IWL_CALIB_TX_IQ) |
+ BIT(IWL_CALIB_BASE_BAND);
+ if (priv->cfg->need_dc_calib)
+ priv->hw_params.calib_rt_cfg |= BIT(IWL_CALIB_CFG_DC_IDX);
+ if (priv->cfg->need_temp_offset_calib)
+ priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_TEMP_OFFSET);
+
+ priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
+
+ return 0;
+}
+
+static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
+ struct ieee80211_channel_switch *ch_switch)
+{
+ /*
+ * MULTI-FIXME
+ * See iwl_mac_channel_switch.
+ */
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+ struct iwl6000_channel_switch_cmd cmd;
+ const struct iwl_channel_info *ch_info;
+ u32 switch_time_in_usec, ucode_switch_time;
+ u16 ch;
+ u32 tsf_low;
+ u8 switch_count;
+ u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+ struct ieee80211_vif *vif = ctx->vif;
+ struct iwl_host_cmd hcmd = {
+ .id = REPLY_CHANNEL_SWITCH,
+ .len = sizeof(cmd),
+ .flags = CMD_SYNC,
+ .data = &cmd,
+ };
+
+ cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+ ch = ch_switch->channel->hw_value;
+ IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
+ ctx->active.channel, ch);
+ cmd.channel = cpu_to_le16(ch);
+ cmd.rxon_flags = ctx->staging.flags;
+ cmd.rxon_filter_flags = ctx->staging.filter_flags;
+ switch_count = ch_switch->count;
+ tsf_low = ch_switch->timestamp & 0x0ffffffff;
+ /*
+ * calculate the ucode channel switch time
+ * adding TSF as one of the factor for when to switch
+ */
+ if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+ if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+ beacon_interval)) {
+ switch_count -= (priv->ucode_beacon_time -
+ tsf_low) / beacon_interval;
+ } else
+ switch_count = 0;
+ }
+ if (switch_count <= 1)
+ cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+ else {
+ switch_time_in_usec =
+ vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+ ucode_switch_time = iwl_usecs_to_beacons(priv,
+ switch_time_in_usec,
+ beacon_interval);
+ cmd.switch_time = iwl_add_beacon_time(priv,
+ priv->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
+ }
+ IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+ cmd.switch_time);
+ ch_info = iwl_get_channel_info(priv, priv->band, ch);
+ if (ch_info)
+ cmd.expect_beacon = is_channel_radar(ch_info);
+ else {
+ IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+ ctx->active.channel, ch);
+ return -EFAULT;
+ }
+ priv->switch_rxon.channel = cmd.channel;
+ priv->switch_rxon.switch_in_progress = true;
+
+ return iwl_send_cmd_sync(priv, &hcmd);
+}
+
+static struct iwl_lib_ops iwl2000_lib = {
+ .set_hw_params = iwl2000_hw_set_hw_params,
+ .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
+ .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
+ .txq_set_sched = iwlagn_txq_set_sched,
+ .txq_agg_enable = iwlagn_txq_agg_enable,
+ .txq_agg_disable = iwlagn_txq_agg_disable,
+ .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
+ .txq_free_tfd = iwl_hw_txq_free_tfd,
+ .txq_init = iwl_hw_tx_queue_init,
+ .rx_handler_setup = iwlagn_rx_handler_setup,
+ .setup_deferred_work = iwlagn_setup_deferred_work,
+ .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
+ .load_ucode = iwlagn_load_ucode,
+ .dump_nic_event_log = iwl_dump_nic_event_log,
+ .dump_nic_error_log = iwl_dump_nic_error_log,
+ .dump_csr = iwl_dump_csr,
+ .dump_fh = iwl_dump_fh,
+ .init_alive_start = iwlagn_init_alive_start,
+ .alive_notify = iwlagn_alive_notify,
+ .send_tx_power = iwlagn_send_tx_power,
+ .update_chain_flags = iwl_update_chain_flags,
+ .set_channel_switch = iwl2030_hw_channel_switch,
+ .apm_ops = {
+ .init = iwl_apm_init,
+ .config = iwl2000_nic_config,
+ },
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REG_BAND_52_HT40_CHANNELS
+ },
+ .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+ .release_semaphore = iwlcore_eeprom_release_semaphore,
+ .calib_version = iwlagn_eeprom_calib_version,
+ .query_addr = iwlagn_eeprom_query_addr,
+ .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
+ },
+ .isr_ops = {
+ .isr = iwl_isr_ict,
+ .free = iwl_free_isr_ict,
+ .alloc = iwl_alloc_isr_ict,
+ .reset = iwl_reset_ict,
+ .disable = iwl_disable_ict,
+ },
+ .temp_ops = {
+ .temperature = iwlagn_temperature,
+ },
+ .debugfs_ops = {
+ .rx_stats_read = iwl_ucode_rx_stats_read,
+ .tx_stats_read = iwl_ucode_tx_stats_read,
+ .general_stats_read = iwl_ucode_general_stats_read,
+ .bt_stats_read = iwl_ucode_bt_stats_read,
+ .reply_tx_error = iwl_reply_tx_error_read,
+ },
+ .check_plcp_health = iwl_good_plcp_health,
+ .check_ack_health = iwl_good_ack_health,
+ .txfifo_flush = iwlagn_txfifo_flush,
+ .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
+ .tt_ops = {
+ .lower_power_detection = iwl_tt_is_low_power_state,
+ .tt_power_mode = iwl_tt_current_power_mode,
+ .ct_kill_check = iwl_check_for_ct_kill,
+ }
+};
+
+static const struct iwl_ops iwl2000_ops = {
+ .lib = &iwl2000_lib,
+ .hcmd = &iwlagn_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
+};
+
+static const struct iwl_ops iwl2030_ops = {
+ .lib = &iwl2000_lib,
+ .hcmd = &iwlagn_bt_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
+};
+
+static const struct iwl_ops iwl200_ops = {
+ .lib = &iwl2000_lib,
+ .hcmd = &iwlagn_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
+};
+
+static const struct iwl_ops iwl230_ops = {
+ .lib = &iwl2000_lib,
+ .hcmd = &iwlagn_bt_hcmd,
+ .utils = &iwlagn_hcmd_utils,
+ .led = &iwlagn_led_ops,
+ .ieee80211_ops = &iwlagn_hw_ops,
+};
+
+static struct iwl_base_params iwl2000_base_params = {
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .max_ll_items = OTP_MAX_LL_ITEMS_2x00,
+ .shadow_ram_support = true,
+ .led_compensation = 51,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .wd_timeout = IWL_DEF_WD_TIMEOUT,
+ .max_event_log_size = 512,
+ .ucode_tracing = true,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
+};
+
+
+static struct iwl_base_params iwl2030_base_params = {
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
+ .num_of_queues = IWLAGN_NUM_QUEUES,
+ .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = false,
+ .max_ll_items = OTP_MAX_LL_ITEMS_2x00,
+ .shadow_ram_support = true,
+ .led_compensation = 57,
+ .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+ .supports_idle = true,
+ .adv_thermal_throttle = true,
+ .support_ct_kill_exit = true,
+ .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+ .chain_noise_scale = 1000,
+ .wd_timeout = IWL_LONG_WD_TIMEOUT,
+ .max_event_log_size = 512,
+ .ucode_tracing = true,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+ .shadow_reg_enable = true,
+};
+
+static struct iwl_ht_params iwl2000_ht_params = {
+ .ht_greenfield_support = true,
+ .use_rts_for_aggregation = true, /* use rts/cts protection */
+};
+
+static struct iwl_bt_params iwl2030_bt_params = {
+ .bt_statistics = true,
+ /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+ .advanced_bt_coexist = true,
+ .agg_time_limit = BT_AGG_THRESHOLD_DEF,
+ .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+ .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+ .bt_sco_disable = true,
+};
+
+#define IWL_DEVICE_2000 \
+ .fw_name_pre = IWL2000_FW_PRE, \
+ .ucode_api_max = IWL2000_UCODE_API_MAX, \
+ .ucode_api_min = IWL2000_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
+ .ops = &iwl2000_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl2000_base_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE \
+
+struct iwl_cfg iwl2000_2bgn_cfg = {
+ .name = "2000 Series 2x2 BGN",
+ IWL_DEVICE_2000,
+ .ht_params = &iwl2000_ht_params,
+};
+
+struct iwl_cfg iwl2000_2bg_cfg = {
+ .name = "2000 Series 2x2 BG",
+ IWL_DEVICE_2000,
+};
+
+#define IWL_DEVICE_2030 \
+ .fw_name_pre = IWL2030_FW_PRE, \
+ .ucode_api_max = IWL2030_UCODE_API_MAX, \
+ .ucode_api_min = IWL2030_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
+ .ops = &iwl2030_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl2030_base_params, \
+ .bt_params = &iwl2030_bt_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true \
+
+struct iwl_cfg iwl2030_2bgn_cfg = {
+ .name = "2000 Series 2x2 BGN/BT",
+ IWL_DEVICE_2000,
+ .ht_params = &iwl2000_ht_params,
+};
+
+struct iwl_cfg iwl2030_2bg_cfg = {
+ .name = "2000 Series 2x2 BG/BT",
+ IWL_DEVICE_2000,
+};
+
+#define IWL_DEVICE_6035 \
+ .fw_name_pre = IWL2030_FW_PRE, \
+ .ucode_api_max = IWL2030_UCODE_API_MAX, \
+ .ucode_api_min = IWL2030_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_6035_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6035_TX_POWER_VERSION, \
+ .ops = &iwl2030_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl2030_base_params, \
+ .bt_params = &iwl2030_bt_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true \
+
+struct iwl_cfg iwl6035_2agn_cfg = {
+ .name = "2000 Series 2x2 AGN/BT",
+ IWL_DEVICE_6035,
+ .ht_params = &iwl2000_ht_params,
+};
+
+struct iwl_cfg iwl6035_2abg_cfg = {
+ .name = "2000 Series 2x2 ABG/BT",
+ IWL_DEVICE_6035,
+};
+
+struct iwl_cfg iwl6035_2bg_cfg = {
+ .name = "2000 Series 2x2 BG/BT",
+ IWL_DEVICE_6035,
+};
+
+#define IWL_DEVICE_200 \
+ .fw_name_pre = IWL200_FW_PRE, \
+ .ucode_api_max = IWL200_UCODE_API_MAX, \
+ .ucode_api_min = IWL200_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
+ .ops = &iwl200_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl2000_base_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true, \
+ .rx_with_siso_diversity = true \
+
+struct iwl_cfg iwl200_bg_cfg = {
+ .name = "200 Series 1x1 BG",
+ IWL_DEVICE_200,
+};
+
+struct iwl_cfg iwl200_bgn_cfg = {
+ .name = "200 Series 1x1 BGN",
+ IWL_DEVICE_200,
+ .ht_params = &iwl2000_ht_params,
+};
+
+#define IWL_DEVICE_230 \
+ .fw_name_pre = IWL200_FW_PRE, \
+ .ucode_api_max = IWL200_UCODE_API_MAX, \
+ .ucode_api_min = IWL200_UCODE_API_MIN, \
+ .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
+ .ops = &iwl230_ops, \
+ .mod_params = &iwlagn_mod_params, \
+ .base_params = &iwl2030_base_params, \
+ .bt_params = &iwl2030_bt_params, \
+ .need_dc_calib = true, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true, \
+ .rx_with_siso_diversity = true \
+
+struct iwl_cfg iwl230_bg_cfg = {
+ .name = "200 Series 1x1 BG/BT",
+ IWL_DEVICE_230,
+};
+
+struct iwl_cfg iwl230_bgn_cfg = {
+ .name = "200 Series 1x1 BGN/BT",
+ IWL_DEVICE_230,
+ .ht_params = &iwl2000_ht_params,
+};
+
+MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_MAX));
+MODULE_FIRMWARE(IWL200_MODULE_FIRMWARE(IWL200_UCODE_API_MAX));