staging: wilc1000: Add SDIO/SPI 802.11 driver
This driver is for the wilc1000 which is a single chip IEEE 802.11
b/g/n device.
The driver works together with cfg80211, which is the kernel side of
configuration management for wireless devices because the wilc1000
chipset is fullmac where the MLME is managed in hardware.
The driver worked from kernel version 2.6.38 and being now ported
to several others since then.
A TODO file is included as well in this commit.
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
new file mode 100644
index 0000000..dd86ca7
--- /dev/null
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -0,0 +1,991 @@
+/* ////////////////////////////////////////////////////////////////////////// */
+/* */
+/* Copyright (c) Atmel Corporation. All rights reserved. */
+/* */
+/* Module Name: wilc_wlan_if.h */
+/* */
+/* */
+/* ///////////////////////////////////////////////////////////////////////// */
+
+
+#ifndef WILC_WLAN_IF_H
+#define WILC_WLAN_IF_H
+
+/*bug 3887: [AP] Allow Management frames to be passed to the host*/
+#define WILC_AP_EXTERNAL_MLME
+#define WILC_P2P
+#define TCP_ENHANCEMENTS
+/* #define MEMORY_STATIC */
+/* #define WILC_FULLY_HOSTING_AP */
+/* #define USE_OLD_SPI_SW */
+
+
+#include "wilc_type.h"
+#include "linux_wlan_common.h"
+
+
+/********************************************
+ *
+ * Debug Flags
+ *
+ ********************************************/
+
+#define N_INIT 0x00000001
+#define N_ERR 0x00000002
+#define N_TXQ 0x00000004
+#define N_INTR 0x00000008
+#define N_RXQ 0x00000010
+
+/********************************************
+ *
+ * Host Interface Defines
+ *
+ ********************************************/
+
+#define HIF_SDIO (0)
+#define HIF_SPI (1 << 0)
+#define HIF_SDIO_GPIO_IRQ (1 << 2)
+
+
+/********************************************
+ *
+ * Tx/Rx Buffer Size Defines
+ *
+ ********************************************/
+
+#define CE_TX_BUFFER_SIZE (64 * 1024)
+#define CE_RX_BUFFER_SIZE (384 * 1024)
+
+/********************************************
+ *
+ * Wlan Interface Defines
+ *
+ ********************************************/
+
+typedef struct {
+ uint32_t read_write: 1;
+ uint32_t function: 3;
+ uint32_t raw: 1;
+ uint32_t address: 17;
+ uint32_t data: 8;
+} sdio_cmd52_t;
+
+typedef struct {
+ /* struct { */
+ uint32_t read_write: 1;
+ uint32_t function: 3;
+ uint32_t block_mode: 1;
+ uint32_t increment: 1;
+ uint32_t address: 17;
+ uint32_t count: 9;
+ /* } bit; */
+ uint8_t *buffer;
+ uint32_t block_size;
+} sdio_cmd53_t;
+
+typedef struct {
+ void (*os_sleep)(uint32_t);
+ void (*os_atomic_sleep)(uint32_t);
+ void (*os_debug)(uint8_t *);
+ void *(*os_malloc)(uint32_t);
+ void *(*os_malloc_atomic)(uint32_t);
+ void (*os_free)(void *);
+ void (*os_lock)(void *);
+ void (*os_unlock)(void *);
+ int (*os_wait)(void *, WILC_Uint32);
+ void (*os_signal)(void *);
+ void (*os_enter_cs)(void *);
+ void (*os_leave_cs)(void *);
+
+ /*Added by Amr - BugID_4720*/
+ void (*os_spin_lock)(void *, unsigned long *);
+ void (*os_spin_unlock)(void *, unsigned long *);
+
+} wilc_wlan_os_func_t;
+
+typedef struct {
+ int io_type;
+ int (*io_init)(void *);
+ void (*io_deinit)(void *);
+ union {
+ struct {
+ int (*sdio_cmd52)(sdio_cmd52_t *);
+ int (*sdio_cmd53)(sdio_cmd53_t *);
+ int (*sdio_set_max_speed)(void);
+ int (*sdio_set_default_speed)(void);
+ } sdio;
+ struct {
+ int (*spi_max_speed)(void);
+ int (*spi_tx)(uint8_t *, uint32_t);
+ int (*spi_rx)(uint8_t *, uint32_t);
+ int (*spi_trx)(uint8_t *, uint8_t *, uint32_t);
+ } spi;
+ } u;
+} wilc_wlan_io_func_t;
+
+typedef struct {
+ void (*rx_indicate)(uint8_t *, uint32_t, uint32_t);
+ void (*rx_complete)(void);
+} wilc_wlan_net_func_t;
+
+typedef struct {
+ void (*mac_indicate)(int);
+} wilc_wlan_indicate_func_t;
+#define WILC_MAC_INDICATE_STATUS 0x1
+#define WILC_MAC_STATUS_INIT -1
+#define WILC_MAC_STATUS_READY 0
+#define WILC_MAC_STATUS_CONNECT 1
+
+#define WILC_MAC_INDICATE_SCAN 0x2
+
+typedef struct {
+ void *os_private;
+
+ void *hif_critical_section;
+
+ uint32_t tx_buffer_size;
+ void *txq_critical_section;
+
+ /*Added by Amr - BugID_4720*/
+ void *txq_add_to_head_critical_section;
+ void *txq_spin_lock;
+
+ void *txq_wait_event;
+
+#if defined(MEMORY_STATIC)
+ uint32_t rx_buffer_size;
+#endif
+ void *rxq_critical_section;
+ void *rxq_wait_event;
+
+ void *cfg_wait_event;
+} wilc_wlan_os_context_t;
+
+typedef struct {
+ wilc_wlan_os_context_t os_context;
+ wilc_wlan_os_func_t os_func;
+ wilc_wlan_io_func_t io_func;
+ wilc_wlan_net_func_t net_func;
+ wilc_wlan_indicate_func_t indicate_func;
+} wilc_wlan_inp_t;
+
+#if 0
+typedef struct {
+ int start;
+ uint32_t id;
+ void *buffer;
+ uint32_t buffer_size;
+ int commit;
+} wilc_wlan_cfg_set_t;
+
+typedef struct {
+ int start;
+ uint32_t id;
+ int commit;
+} wilc_wlan_cfg_get_t;
+
+typedef struct {
+ uint32_t id;
+ void *buffer;
+ uint32_t buffer_size;
+} wilc_wlan_cfg_val_t;
+#endif
+
+struct tx_complete_data {
+ #ifdef WILC_FULLY_HOSTING_AP
+ struct tx_complete_data *next;
+ #endif
+ int size;
+ void *buff;
+ uint8_t *pBssid;
+ struct sk_buff *skb;
+};
+
+
+typedef void (*wilc_tx_complete_func_t)(void *, int);
+
+#define WILC_TX_ERR_NO_BUF (-2)
+
+typedef struct {
+ int (*wlan_firmware_download)(const uint8_t *, uint32_t);
+ int (*wlan_start)(void);
+ int (*wlan_stop)(void);
+ int (*wlan_add_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
+ int (*wlan_handle_tx_que)(uint32_t *);
+ void (*wlan_handle_rx_que)(void);
+ void (*wlan_handle_rx_isr)(void);
+ void (*wlan_cleanup)(void);
+ int (*wlan_cfg_set)(int, uint32_t, uint8_t *, uint32_t, int, uint32_t);
+ int (*wlan_cfg_get)(int, uint32_t, int, uint32_t);
+ int (*wlan_cfg_get_value)(uint32_t, uint8_t *, uint32_t);
+ /*Bug3959: transmitting mgmt frames received from host*/
+ #if defined(WILC_AP_EXTERNAL_MLME) || defined(WILC_P2P)
+ int (*wlan_add_mgmt_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
+
+ #ifdef WILC_FULLY_HOSTING_AP
+ int (*wlan_add_data_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
+ #endif
+
+ #endif
+} wilc_wlan_oup_t;
+
+/********************************************
+ *
+ * Wlan Configuration ID
+ *
+ ********************************************/
+
+#define MAX_SSID_LEN 33
+#define MAX_RATES_SUPPORTED 12
+
+#define INFINITE_SLEEP_TIME ((WILC_Uint32)0xFFFFFFFF)
+
+#ifdef WILC_PARSE_SCAN_IN_HOST
+typedef enum {
+ SUPP_RATES_IE = 1,
+ EXT_SUPP_RATES_IE = 50,
+ HT_CAPABILITY_IE = 45,
+ RSN_IE = 48,
+ WPA_IE = 221,
+ WMM_IE = 221,
+ #ifdef WILC_P2P
+ P2P_IE = 221,
+ #endif
+} BEACON_IE;
+#endif
+typedef enum {
+ INFRASTRUCTURE = 0,
+ INDEPENDENT,
+ AP,
+} BSSTYPE_T;
+
+typedef enum {
+ RATE_AUTO = 0,
+ RATE_1MB = 1,
+ RATE_2MB = 2,
+ RATE_5MB = 5,
+ RATE_6MB = 6,
+ RATE_9MB = 9,
+ RATE_11MB = 11,
+ RATE_12MB = 12,
+ RATE_18MB = 18,
+ RATE_24MB = 24,
+ RATE_26MB = 36,
+ RATE_48MB = 48,
+ RATE_54MB = 54
+} TX_RATE_T;
+
+typedef enum {
+ B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */
+ G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */
+ G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */
+ G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */
+} G_OPERATING_MODE_T;
+
+typedef enum {
+ G_SHORT_PREAMBLE = 0, /* Short Preamble */
+ G_LONG_PREAMBLE = 1, /* Long Preamble */
+ G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
+} G_PREAMBLE_T;
+
+#define MAC_CONNECTED 1
+#define MAC_DISCONNECTED 0
+
+/*bug3819: */
+#define SCAN_DONE TRUE
+typedef enum {
+ PASSIVE_SCAN = 0,
+ ACTIVE_SCAN = 1,
+} SCANTYPE_T;
+
+typedef enum {
+ NO_POWERSAVE = 0,
+ MIN_FAST_PS = 1,
+ MAX_FAST_PS = 2,
+ MIN_PSPOLL_PS = 3,
+ MAX_PSPOLL_PS = 4
+} USER_PS_MODE_T;
+
+typedef enum {
+ CHIP_WAKEDUP = 0,
+ CHIP_SLEEPING_AUTO = 1,
+ CHIP_SLEEPING_MANUAL = 2
+} CHIP_PS_STATE_T;
+
+typedef enum {
+ ACQUIRE_ONLY = 0,
+ ACQUIRE_AND_WAKEUP = 1,
+} BUS_ACQUIRE_T;
+
+typedef enum {
+ RELEASE_ONLY = 0,
+ RELEASE_ALLOW_SLEEP = 1,
+} BUS_RELEASE_T;
+
+typedef enum {
+ NO_SECURITY = 0,
+ WEP_40 = 0x3,
+ WEP_104 = 0x7,
+ WPA_AES = 0x29,
+ WPA_TKIP = 0x49,
+ WPA_AES_TKIP = 0x69, /* Aes or Tkip */
+ WPA2_AES = 0x31,
+ WPA2_TKIP = 0x51,
+ WPA2_AES_TKIP = 0x71, /* Aes or Tkip */
+} SECURITY_T;
+
+typedef enum {
+ OPEN_SYSTEM = 1,
+ SHARED_KEY = 2,
+ ANY = 3,
+ IEEE8021 = 5
+} AUTHTYPE_T;
+
+typedef enum {
+ SITE_SURVEY_1CH = 0,
+ SITE_SURVEY_ALL_CH = 1,
+ SITE_SURVEY_OFF = 2
+} SITE_SURVEY_T;
+
+typedef enum {
+ NORMAL_ACK = 0,
+ NO_ACK,
+} ACK_POLICY_T;
+
+typedef enum {
+ DONT_RESET = 0,
+ DO_RESET = 1,
+ NO_REQUEST = 2,
+} RESET_REQ_T;
+
+typedef enum {
+ REKEY_DISABLE = 1,
+ REKEY_TIME_BASE,
+ REKEY_PKT_BASE,
+ REKEY_TIME_PKT_BASE
+} RSNA_REKEY_POLICY_T;
+
+typedef enum {
+ FILTER_NO = 0x00,
+ FILTER_AP_ONLY = 0x01,
+ FILTER_STA_ONLY = 0x02
+} SCAN_CLASS_FITLER_T;
+
+typedef enum {
+ PRI_HIGH_RSSI = 0x00,
+ PRI_LOW_RSSI = 0x04,
+ PRI_DETECT = 0x08
+} SCAN_PRI_T;
+
+typedef enum {
+ CH_FILTER_OFF = 0x00,
+ CH_FILTER_ON = 0x10
+} CH_FILTER_T;
+
+typedef enum {
+ AUTO_PROT = 0, /* Auto */
+ NO_PROT, /* Do not use any protection */
+ ERP_PROT, /* Protect all ERP frame exchanges */
+ HT_PROT, /* Protect all HT frame exchanges */
+ GF_PROT, /* Protect all GF frame exchanges */
+} N_PROTECTION_MODE_T;
+
+typedef enum {
+ G_SELF_CTS_PROT,
+ G_RTS_CTS_PROT,
+} G_PROTECTION_MODE_T;
+
+typedef enum {
+ HT_MIXED_MODE = 1,
+ HT_ONLY_20MHZ_MODE,
+ HT_ONLY_20_40MHZ_MODE,
+} N_OPERATING_MODE_T;
+
+typedef enum {
+ NO_DETECT = 0,
+ DETECT_ONLY = 1,
+ DETECT_PROTECT = 2,
+ DETECT_PROTECT_REPORT = 3,
+} N_OBSS_DETECTION_T;
+
+typedef enum {
+ RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
+ FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
+ LSIG_TXOP_PROT, /* LSIG TXOP Protection */
+ FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
+} N_PROTECTION_TYPE_T;
+
+typedef enum {
+ STATIC_MODE = 1,
+ DYNAMIC_MODE = 2,
+ MIMO_MODE = 3, /* power save disable */
+} N_SMPS_MODE_T;
+
+typedef enum {
+ DISABLE_SELF_CTS,
+ ENABLE_SELF_CTS,
+ DISABLE_TX_ABORT,
+ ENABLE_TX_ABORT,
+ HW_TRIGGER_ABORT,
+ SW_TRIGGER_ABORT,
+} TX_ABORT_OPTION_T;
+
+typedef enum {
+ WID_CHAR = 0,
+ WID_SHORT = 1,
+ WID_INT = 2,
+ WID_STR = 3,
+ WID_BIN_DATA = 4,
+ WID_BIN = 5,
+ WID_IP = 6,
+ WID_ADR = 7,
+ WID_UNDEF = 8,
+ WID_TYPE_FORCE_32BIT = 0xFFFFFFFF
+
+} WID_TYPE_T, tenuWIDtype;
+
+typedef enum {
+ WID_NIL = 0xffff,
+
+
+ /* BSS Type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Infrastructure Independent Access Point */
+ /* Values to set : 0 1 2 */
+ /* -------------------------------------------------------------- */
+ WID_BSS_TYPE = 0x0000,
+
+ /* Transmit Rate */
+ /* -------------------------------------------------------------- */
+ /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */
+ /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */
+ /* -------------------------------------------------------------- */
+ WID_CURRENT_TX_RATE = 0x0001,
+
+ /* Channel */
+ /* ------------------------------------------------------------------- */
+ /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
+ /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
+ /* -------------------------------------------------------------------- */
+ WID_CURRENT_CHANNEL = 0x0002,
+
+ /* Preamble */
+ /* -------------------------------------------------------------- */
+ /* Configuration : short long Auto */
+ /* Values to set : 0 1 2 */
+ /* -------------------------------------------------------------- */
+ WID_PREAMBLE = 0x0003,
+
+ /* 11g operating mode (ignored if 11g not present) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */
+ /* Values to set : 1 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11G_OPERATING_MODE = 0x0004,
+
+ /* Mac status (response only) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : disconnect connect */
+ /* Values to get : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_STATUS = 0x0005,
+
+ /* Scan type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Passive Scanning Active Scanning */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_SCAN_TYPE = 0x0007,
+
+ /* Key Id (WEP default key Id) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 0 to 3 */
+ /* Values to set : Same value. Default is 0 */
+ /* -------------------------------------------------------------- */
+ WID_KEY_ID = 0x0009,
+
+ /* QoS Enable */
+ /* -------------------------------------------------------------- */
+ /* Configuration : QoS Disable WMM Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_QOS_ENABLE = 0x000A,
+
+ /* Power Management */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */
+ /* Values to set : 0 1 2 */
+ /* ------------------------------------------------------------------ */
+ WID_POWER_MANAGEMENT = 0x000B,
+
+ /* WEP/802 11I Configuration */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */
+ /* Values (0x) : 00 03 07 29 49 31 51 */
+ /* */
+ /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */
+ /* Values (0x) : 69 71 */
+ /* ------------------------------------------------------------------ */
+ WID_11I_MODE = 0x000C,
+
+ /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Open System Shared Key Any Type | 802.1x Auth */
+ /* Values (0x) : 01 02 03 | BIT2 */
+ /* ------------------------------------------------------------------ */
+ WID_AUTH_TYPE = 0x000D,
+
+ /* Site Survey Type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Values to set */
+ /* Survey 1 Channel : 0 */
+ /* survey all Channels : 1 */
+ /* Disable Site Survey : 2 */
+ /* -------------------------------------------------------------- */
+ WID_SITE_SURVEY = 0x000E,
+
+ /* Listen Interval */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 1 to 255 */
+ /* Values to set : Same value. Default is 3 */
+ /* -------------------------------------------------------------- */
+ WID_LISTEN_INTERVAL = 0x000F,
+
+ /* DTIM Period */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 1 to 255 */
+ /* Values to set : Same value. Default is 3 */
+ /* -------------------------------------------------------------- */
+ WID_DTIM_PERIOD = 0x0010,
+
+ /* ACK Policy */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Normal Ack No Ack */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_ACK_POLICY = 0x0011,
+
+ /* Reset MAC (Set only) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Don't Reset Reset No Request */
+ /* Values to set : 0 1 2 */
+ /* -------------------------------------------------------------- */
+ WID_RESET = 0x0012,
+
+ /* Broadcast SSID Option: Setting this will adhere to "" SSID element */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Enable Disable */
+ /* Values to set : 1 0 */
+ /* ------------------------------------------------------------------ */
+ WID_BCAST_SSID = 0x0015,
+
+ /* Disconnect (Station) */
+ /* ------------------------------------------------------------------ */
+ /* Configuration : Association ID */
+ /* Values to set : Association ID */
+ /* ------------------------------------------------------------------ */
+ WID_DISCONNECT = 0x0016,
+
+ /* 11a Tx Power Level */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Sets TX Power (Higher the value greater the power) */
+ /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
+ /* -------------------------------------------------------------------- */
+ WID_TX_POWER_LEVEL_11A = 0x0018,
+
+ /* Group Key Update Policy Selection */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disabled timeBased packetBased timePacketBased */
+ /* Values to set : 1 2 3 4 */
+ /* -------------------------------------------------------------------- */
+ WID_REKEY_POLICY = 0x0019,
+
+ /* Allow Short Slot */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disallow Short Slot Allow Short Slot */
+ /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_SHORT_SLOT_ALLOWED = 0x001A,
+
+ WID_PHY_ACTIVE_REG = 0x001B,
+
+ /* 11b Tx Power Level */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Sets TX Power (Higher the value greater the power) */
+ /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
+ /* -------------------------------------------------------------------- */
+ WID_TX_POWER_LEVEL_11B = 0x001D,
+
+ /* Scan Request */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Request default scan */
+ /* Values to set : 0 */
+ /* -------------------------------------------------------------------- */
+ WID_START_SCAN_REQ = 0x001E,
+
+ /* Rssi (get only) */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : */
+ /* Values to get : Rssi value */
+ /* -------------------------------------------------------------------- */
+ WID_RSSI = 0x001F,
+
+ /* Join Request */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Request to join */
+ /* Values to set : index of scan result */
+ /* -------------------------------------------------------------------- */
+ WID_JOIN_REQ = 0x0020,
+
+ WID_LINKSPEED = 0x0026,
+
+ /* Enable User Control of TX Power */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------------- */
+ WID_USER_CONTROL_ON_TX_POWER = 0x0027,
+
+ WID_MEMORY_ACCESS_8BIT = 0x0029,
+
+ /* Enable Auto RX Sensitivity feature */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------------- */
+ WID_AUTO_RX_SENSITIVITY = 0x0032,
+
+ /* Receive Buffer Based Ack */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------------- */
+ WID_DATAFLOW_CONTROL = 0x0033,
+
+ /* Scan Filter */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Class No filter AP only Station Only */
+ /* Values to set : 0 1 2 */
+ /* Configuration : Priority High Rssi Low Rssi Detect */
+ /* Values to set : 0 0x4 0x08 */
+ /* Configuration : Channel filter off filter on */
+ /* Values to set : 0 0x10 */
+ /* -------------------------------------------------------------------- */
+ WID_SCAN_FILTER = 0x0036,
+
+ /* Link Loss Threshold (measure in the beacon period) */
+ /* -------------------------------------------------------------------- */
+ /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */
+ /* Values to set : Same value. Default is 10 */
+ /* -------------------------------------------------------------------- */
+ WID_LINK_LOSS_THRESHOLD = 0x0037,
+
+ /*BugID_4978*/
+ WID_ABORT_RUNNING_SCAN = 0x003E,
+
+ /* NMAC Character WID list */
+ WID_WPS_START = 0x0043,
+
+ /* Protection mode for MAC */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Auto No protection ERP HT GF */
+ /* Values to set : 0 1 2 3 4 */
+ /* -------------------------------------------------------------- */
+ WID_11N_PROT_MECH = 0x0080,
+
+ /* ERP Protection type for MAC */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Self-CTS RTS-CTS */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_ERP_PROT_TYPE = 0x0081,
+
+ /* HT Option Enable */
+ /* -------------------------------------------------------------- */
+ /* Configuration : HT Enable HT Disable */
+ /* Values to set : 1 0 */
+ /* -------------------------------------------------------------- */
+ WID_11N_ENABLE = 0x0082,
+
+ /* 11n Operating mode (Note that 11g operating mode will also be */
+ /* used in addition to this, if this is set to HT Mixed mode) */
+ /* -------------------------------------------------------------- */
+ /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */
+ /* Values to set : 1 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_OPERATING_MODE = 0x0083,
+
+ /* 11n OBSS non-HT STA Detection flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Do not detect */
+ /* Values to set : 0 */
+ /* Configuration : Detect, do not protect or report */
+ /* Values to set : 1 */
+ /* Configuration : Detect, protect and do not report */
+ /* Values to set : 2 */
+ /* Configuration : Detect, protect and report to other BSS */
+ /* Values to set : 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_OBSS_NONHT_DETECTION = 0x0084,
+
+ /* 11n HT Protection Type */
+ /* -------------------------------------------------------------- */
+ /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */
+ /* Values to set : 0 1 */
+ /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */
+ /* Values to set : 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_HT_PROT_TYPE = 0x0085,
+
+ /* 11n RIFS Protection Enable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_RIFS_PROT_ENABLE = 0x0086,
+
+ /* SMPS Mode */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Static Dynamic MIMO (Power Save Disabled) */
+ /* Values to set : 1 2 3 */
+ /* -------------------------------------------------------------- */
+ WID_11N_SMPS_MODE = 0x0087,
+
+ /* Current transmit MCS */
+ /* -------------------------------------------------------------- */
+ /* Configuration : MCS Index for data rate */
+ /* Values to set : 0 to 7 */
+ /* -------------------------------------------------------------- */
+ WID_11N_CURRENT_TX_MCS = 0x0088,
+
+ WID_11N_PRINT_STATS = 0x0089,
+
+ /* 11n Short GI Enable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_SHORT_GI_ENABLE = 0x008D,
+
+ /* 11n RIFS Enable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_RIFS_MODE = 0x0094,
+
+ /* TX Abort Feature */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Self CTS Enable Self CTS */
+ /* Values to set : 0 1 */
+ /* Configuration : Disable TX Abort Enable TX Abort */
+ /* Values to set : 2 3 */
+ /* Configuration : Enable HW TX Abort Enable SW TX Abort */
+ /* Values to set : 4 5 */
+ /* -------------------------------------------------------------- */
+ WID_TX_ABORT_CONFIG = 0x00A1,
+
+ WID_REG_TSSI_11B_VALUE = 0x00A6,
+ WID_REG_TSSI_11G_VALUE = 0x00A7,
+ WID_REG_TSSI_11N_VALUE = 0x00A8,
+ WID_TX_CALIBRATION = 0x00A9,
+ WID_DSCR_TSSI_11B_VALUE = 0x00AA,
+ WID_DSCR_TSSI_11G_VALUE = 0x00AB,
+ WID_DSCR_TSSI_11N_VALUE = 0x00AC,
+
+ /* Immediate Block-Ack Support */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 0 1 */
+ /* -------------------------------------------------------------- */
+ WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
+
+ /* TXOP Disable Flag */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Disable Enable */
+ /* Values to set : 1 0 */
+ /* -------------------------------------------------------------- */
+ WID_11N_TXOP_PROT_DISABLE = 0x00B0,
+
+
+ WID_TX_POWER_LEVEL_11N = 0x00B1,
+
+ /* Custom Character WID list */
+ WID_PC_TEST_MODE = 0x00C8,
+ /*bug3819: */
+ /* SCAN Complete notification WID*/
+ WID_SCAN_COMPLETE = 0x00C9,
+
+#ifdef WILC_AP_EXTERNAL_MLME
+ WID_DEL_BEACON = 0x00CA,
+#endif
+
+ WID_LOGTerminal_Switch = 0x00CD,
+ /* EMAC Short WID list */
+ /* RTS Threshold */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 256 to 2347 */
+ /* Values to set : Same value. Default is 2347 */
+ /* -------------------------------------------------------------- */
+ WID_RTS_THRESHOLD = 0x1000,
+
+ /* Fragmentation Threshold */
+ /* -------------------------------------------------------------- */
+ /* Configuration : Any value between 256 to 2346 */
+ /* Values to set : Same value. Default is 2346 */
+ /* -------------------------------------------------------------- */
+ WID_FRAG_THRESHOLD = 0x1001,
+
+ WID_SHORT_RETRY_LIMIT = 0x1002,
+ WID_LONG_RETRY_LIMIT = 0x1003,
+ WID_BEACON_INTERVAL = 0x1006,
+ WID_MEMORY_ACCESS_16BIT = 0x1008,
+ WID_RX_SENSE = 0x100B,
+ WID_ACTIVE_SCAN_TIME = 0x100C,
+ WID_PASSIVE_SCAN_TIME = 0x100D,
+
+ WID_SITE_SURVEY_SCAN_TIME = 0x100E,
+ WID_JOIN_START_TIMEOUT = 0x100F,
+ WID_AUTH_TIMEOUT = 0x1010,
+ WID_ASOC_TIMEOUT = 0x1011,
+ WID_11I_PROTOCOL_TIMEOUT = 0x1012,
+ WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
+
+ /* NMAC Short WID list */
+ WID_11N_SIG_QUAL_VAL = 0x1085,
+ WID_CCA_THRESHOLD = 0x1087,
+
+ /* Custom Short WID list */
+
+ /* EMAC Integer WID list */
+ WID_FAILED_COUNT = 0x2000,
+ WID_RETRY_COUNT = 0x2001,
+ WID_MULTIPLE_RETRY_COUNT = 0x2002,
+ WID_FRAME_DUPLICATE_COUNT = 0x2003,
+ WID_ACK_FAILURE_COUNT = 0x2004,
+ WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
+ WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
+ WID_FCS_ERROR_COUNT = 0x2007,
+ WID_SUCCESS_FRAME_COUNT = 0x2008,
+ WID_HUT_TX_COUNT = 0x200A,
+ WID_TX_FRAGMENT_COUNT = 0x200B,
+ WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
+ WID_RTS_SUCCESS_COUNT = 0x200D,
+ WID_RTS_FAILURE_COUNT = 0x200E,
+ WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
+ WID_REKEY_PERIOD = 0x2010,
+ WID_REKEY_PACKET_COUNT = 0x2011,
+ WID_1X_SERV_ADDR = 0x2012,
+ WID_STACK_IP_ADDR = 0x2013,
+ WID_STACK_NETMASK_ADDR = 0x2014,
+ WID_HW_RX_COUNT = 0x2015,
+ WID_MEMORY_ADDRESS = 0x201E,
+ WID_MEMORY_ACCESS_32BIT = 0x201F,
+ WID_RF_REG_VAL = 0x2021,
+
+
+ /* NMAC Integer WID list */
+ WID_11N_PHY_ACTIVE_REG_VAL = 0x2080,
+
+ /* Custom Integer WID list */
+ WID_GET_INACTIVE_TIME = 0x2084,
+ WID_SET_DRV_HANDLER = 0X2085,
+ WID_SET_OPERATION_MODE = 0X2086,
+ /* EMAC String WID list */
+ WID_SSID = 0x3000,
+ WID_FIRMWARE_VERSION = 0x3001,
+ WID_OPERATIONAL_RATE_SET = 0x3002,
+ WID_BSSID = 0x3003,
+ WID_WEP_KEY_VALUE = 0x3004,
+ WID_11I_PSK = 0x3008,
+ WID_11E_P_ACTION_REQ = 0x3009,
+ WID_1X_KEY = 0x300A,
+ WID_HARDWARE_VERSION = 0x300B,
+ WID_MAC_ADDR = 0x300C,
+ WID_HUT_DEST_ADDR = 0x300D,
+ WID_PHY_VERSION = 0x300F,
+ WID_SUPP_USERNAME = 0x3010,
+ WID_SUPP_PASSWORD = 0x3011,
+ WID_SITE_SURVEY_RESULTS = 0x3012,
+ WID_RX_POWER_LEVEL = 0x3013,
+ WID_DEL_ALL_RX_BA = 0x3014,
+ WID_SET_STA_MAC_INACTIVE_TIME = 0x3017,
+ WID_ADD_WEP_KEY = 0x3019,
+ WID_REMOVE_WEP_KEY = 0x301A,
+ WID_ADD_PTK = 0x301B,
+ WID_ADD_RX_GTK = 0x301C,
+ WID_ADD_TX_GTK = 0x301D,
+ WID_REMOVE_KEY = 0x301E,
+ WID_ASSOC_REQ_INFO = 0x301F,
+ WID_ASSOC_RES_INFO = 0x3020,
+ WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
+ WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
+ WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
+ WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
+
+ /* NMAC String WID list */
+ WID_11N_P_ACTION_REQ = 0x3080,
+ WID_HUT_TEST_ID = 0x3081,
+ WID_PMKID_INFO = 0x3082,
+ WID_FIRMWARE_INFO = 0x3083,
+ #ifdef WILC_P2P
+ WID_REGISTER_FRAME = 0x3084,
+ #endif
+ WID_DEL_ALL_STA = 0x3085,
+ #ifdef WILC_P2P
+ WID_REMAIN_ON_CHAN = 0x3996,
+ #endif
+ /*BugID_4156*/
+ WID_SSID_PROBE_REQ = 0x3997,
+ /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/
+ WID_JOIN_REQ_EXTENDED = 0x3998,
+
+ /* BugID 4951: WID toset IP address in firmware */
+ WID_IP_ADDRESS = 0x3999,
+
+
+
+ /* Custom String WID list */
+
+ /* EMAC Binary WID list */
+ WID_UAPSD_CONFIG = 0x4001,
+ WID_UAPSD_STATUS = 0x4002,
+ WID_WMM_AP_AC_PARAMS = 0x4003,
+ WID_WMM_STA_AC_PARAMS = 0x4004,
+ WID_NETWORK_INFO = 0x4005,
+ WID_STA_JOIN_INFO = 0x4006,
+ WID_CONNECTED_STA_LIST = 0x4007,
+
+ /* NMAC Binary WID list */
+ WID_11N_AUTORATE_TABLE = 0x4080,
+
+
+ /*Added here by Amr - BugID 4134*/
+ WID_SCAN_CHANNEL_LIST = 0x4084,
+
+ /*BugID_3746 WID to add IE to be added in next probe request*/
+ WID_INFO_ELEMENT_PROBE = 0x4085,
+ /*BugID_3746 WID to add IE to be added in next associate request*/
+ WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
+ WID_ADD_STA = 0X4087,
+ WID_REMOVE_STA = 0X4088,
+ WID_EDIT_STA = 0X4089,
+ WID_ADD_BEACON = 0x408a,
+
+ /* BugID 5108 */
+ WID_SETUP_MULTICAST_FILTER = 0x408b,
+
+ /* Miscellaneous WIDs */
+ WID_ALL = 0x7FFE,
+ WID_MAX = 0xFFFF
+} WID_T;
+
+int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup);
+
+void wilc_bus_set_max_speed(void);
+void wilc_bus_set_default_speed(void);
+uint32_t wilc_get_chipid(uint8_t update);
+
+
+#endif