drm/i915: Rename defines for selection of ddi buffer translation slot
Renaming the HSW-specific macros for ddi buffer translation slot to denote the
slot and not the vswing/pre-emph values as they are platform-dependent.
This patch is based on top of the patch series for renaming the DP training
vswing/pre-emph defines:
http://lists.freedesktop.org/archives/intel-gfx/2014-August/050407.html
v2: Creating single macro with argument for slot number (Damien)
v3: Adding macro for num of translation entries (Damien)
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 82414b8..559c7f8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5971,15 +5971,7 @@
#define DDI_BUF_CTL_B 0x64100
#define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B)
#define DDI_BUF_CTL_ENABLE (1<<31)
-#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */
-#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
-#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */
-#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
-#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */
-#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
-#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */
-#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */
-#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
+#define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
#define DDI_BUF_EMP_MASK (0xf<<24)
#define DDI_BUF_PORT_REVERSAL (1<<16)
#define DDI_BUF_IS_IDLE (1<<7)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 02d5584..29b7628 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -241,18 +241,6 @@
intel_prepare_ddi_buffers(dev, port);
}
-static const long hsw_ddi_buf_ctl_values[] = {
- DDI_BUF_EMP_400MV_0DB_HSW,
- DDI_BUF_EMP_400MV_3_5DB_HSW,
- DDI_BUF_EMP_400MV_6DB_HSW,
- DDI_BUF_EMP_400MV_9_5DB_HSW,
- DDI_BUF_EMP_600MV_0DB_HSW,
- DDI_BUF_EMP_600MV_3_5DB_HSW,
- DDI_BUF_EMP_600MV_6DB_HSW,
- DDI_BUF_EMP_800MV_0DB_HSW,
- DDI_BUF_EMP_800MV_3_5DB_HSW
-};
-
static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
enum port port)
{
@@ -276,6 +264,8 @@
* DDI A (which is used for eDP)
*/
+#define NUM_FDI_TRANSLATION_ENTRIES (ARRAY_SIZE(hsw_ddi_translations_fdi) / 2)
+
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -312,7 +302,7 @@
/* Start the training iterating through available voltages and emphasis,
* testing each value twice. */
- for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
+ for (i = 0; i < NUM_FDI_TRANSLATION_ENTRIES * 2; i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
@@ -327,7 +317,7 @@
I915_WRITE(DDI_BUF_CTL(PORT_E),
DDI_BUF_CTL_ENABLE |
((intel_crtc->config.fdi_lanes - 1) << 1) |
- hsw_ddi_buf_ctl_values[i / 2]);
+ DDI_BUF_TRANS_SELECT(i / 2));
POSTING_READ(DDI_BUF_CTL(PORT_E));
udelay(600);
@@ -402,7 +392,7 @@
enc_to_dig_port(&encoder->base);
intel_dp->DP = intel_dig_port->saved_port_bits |
- DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
+ DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0);
intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 74a59b3..93bc026 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2892,29 +2892,29 @@
DP_TRAIN_PRE_EMPHASIS_MASK);
switch (signal_levels) {
case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
- return DDI_BUF_EMP_400MV_0DB_HSW;
+ return DDI_BUF_TRANS_SELECT(0);
case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
- return DDI_BUF_EMP_400MV_3_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(1);
case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
- return DDI_BUF_EMP_400MV_6DB_HSW;
+ return DDI_BUF_TRANS_SELECT(2);
case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_9_5:
- return DDI_BUF_EMP_400MV_9_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(3);
case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
- return DDI_BUF_EMP_600MV_0DB_HSW;
+ return DDI_BUF_TRANS_SELECT(4);
case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
- return DDI_BUF_EMP_600MV_3_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(5);
case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
- return DDI_BUF_EMP_600MV_6DB_HSW;
+ return DDI_BUF_TRANS_SELECT(6);
case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
- return DDI_BUF_EMP_800MV_0DB_HSW;
+ return DDI_BUF_TRANS_SELECT(7);
case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
- return DDI_BUF_EMP_800MV_3_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(8);
default:
DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
"0x%x\n", signal_levels);
- return DDI_BUF_EMP_400MV_0DB_HSW;
+ return DDI_BUF_TRANS_SELECT(0);
}
}