| /* |
| * Driver for 93xx46 EEPROMs |
| * |
| * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| #include <linux/sysfs.h> |
| #include <linux/eeprom_93xx46.h> |
| |
| #define OP_START 0x4 |
| #define OP_WRITE (OP_START | 0x1) |
| #define OP_READ (OP_START | 0x2) |
| #define ADDR_EWDS 0x00 |
| #define ADDR_ERAL 0x20 |
| #define ADDR_EWEN 0x30 |
| |
| struct eeprom_93xx46_dev { |
| struct spi_device *spi; |
| struct eeprom_93xx46_platform_data *pdata; |
| struct bin_attribute bin; |
| struct mutex lock; |
| int addrlen; |
| }; |
| |
| static ssize_t |
| eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct eeprom_93xx46_dev *edev; |
| struct device *dev; |
| struct spi_message m; |
| struct spi_transfer t[2]; |
| int bits, ret; |
| u16 cmd_addr; |
| |
| dev = container_of(kobj, struct device, kobj); |
| edev = dev_get_drvdata(dev); |
| |
| cmd_addr = OP_READ << edev->addrlen; |
| |
| if (edev->addrlen == 7) { |
| cmd_addr |= off & 0x7f; |
| bits = 10; |
| } else { |
| cmd_addr |= off & 0x3f; |
| bits = 9; |
| } |
| |
| dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n", |
| cmd_addr, edev->spi->max_speed_hz); |
| |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| |
| t[0].tx_buf = (char *)&cmd_addr; |
| t[0].len = 2; |
| t[0].bits_per_word = bits; |
| spi_message_add_tail(&t[0], &m); |
| |
| t[1].rx_buf = buf; |
| t[1].len = count; |
| t[1].bits_per_word = 8; |
| spi_message_add_tail(&t[1], &m); |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| ret = spi_sync(edev->spi, &m); |
| /* have to wait at least Tcsl ns */ |
| ndelay(250); |
| if (ret) { |
| dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n", |
| count, (int)off, ret); |
| } |
| |
| if (edev->pdata->finish) |
| edev->pdata->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| return ret ? : count; |
| } |
| |
| static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on) |
| { |
| struct spi_message m; |
| struct spi_transfer t; |
| int bits, ret; |
| u16 cmd_addr; |
| |
| cmd_addr = OP_START << edev->addrlen; |
| if (edev->addrlen == 7) { |
| cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1; |
| bits = 10; |
| } else { |
| cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS); |
| bits = 9; |
| } |
| |
| dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr); |
| |
| spi_message_init(&m); |
| memset(&t, 0, sizeof(t)); |
| |
| t.tx_buf = &cmd_addr; |
| t.len = 2; |
| t.bits_per_word = bits; |
| spi_message_add_tail(&t, &m); |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| ret = spi_sync(edev->spi, &m); |
| /* have to wait at least Tcsl ns */ |
| ndelay(250); |
| if (ret) |
| dev_err(&edev->spi->dev, "erase/write %sable error %d\n", |
| is_on ? "en" : "dis", ret); |
| |
| if (edev->pdata->finish) |
| edev->pdata->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| return ret; |
| } |
| |
| static ssize_t |
| eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev, |
| const char *buf, unsigned off) |
| { |
| struct spi_message m; |
| struct spi_transfer t[2]; |
| int bits, data_len, ret; |
| u16 cmd_addr; |
| |
| cmd_addr = OP_WRITE << edev->addrlen; |
| |
| if (edev->addrlen == 7) { |
| cmd_addr |= off & 0x7f; |
| bits = 10; |
| data_len = 1; |
| } else { |
| cmd_addr |= off & 0x3f; |
| bits = 9; |
| data_len = 2; |
| } |
| |
| dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr); |
| |
| spi_message_init(&m); |
| memset(t, 0, sizeof(t)); |
| |
| t[0].tx_buf = (char *)&cmd_addr; |
| t[0].len = 2; |
| t[0].bits_per_word = bits; |
| spi_message_add_tail(&t[0], &m); |
| |
| t[1].tx_buf = buf; |
| t[1].len = data_len; |
| t[1].bits_per_word = 8; |
| spi_message_add_tail(&t[1], &m); |
| |
| ret = spi_sync(edev->spi, &m); |
| /* have to wait program cycle time Twc ms */ |
| mdelay(6); |
| return ret; |
| } |
| |
| static ssize_t |
| eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct eeprom_93xx46_dev *edev; |
| struct device *dev; |
| int i, ret, step = 1; |
| |
| dev = container_of(kobj, struct device, kobj); |
| edev = dev_get_drvdata(dev); |
| |
| /* only write even number of bytes on 16-bit devices */ |
| if (edev->addrlen == 6) { |
| step = 2; |
| count &= ~1; |
| } |
| |
| /* erase/write enable */ |
| ret = eeprom_93xx46_ew(edev, 1); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| for (i = 0; i < count; i += step) { |
| ret = eeprom_93xx46_write_word(edev, &buf[i], off + i); |
| if (ret) { |
| dev_err(&edev->spi->dev, "write failed at %d: %d\n", |
| (int)off + i, ret); |
| break; |
| } |
| } |
| |
| if (edev->pdata->finish) |
| edev->pdata->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| |
| /* erase/write disable */ |
| eeprom_93xx46_ew(edev, 0); |
| return ret ? : count; |
| } |
| |
| static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev) |
| { |
| struct eeprom_93xx46_platform_data *pd = edev->pdata; |
| struct spi_message m; |
| struct spi_transfer t; |
| int bits, ret; |
| u16 cmd_addr; |
| |
| cmd_addr = OP_START << edev->addrlen; |
| if (edev->addrlen == 7) { |
| cmd_addr |= ADDR_ERAL << 1; |
| bits = 10; |
| } else { |
| cmd_addr |= ADDR_ERAL; |
| bits = 9; |
| } |
| |
| spi_message_init(&m); |
| memset(&t, 0, sizeof(t)); |
| |
| t.tx_buf = &cmd_addr; |
| t.len = 2; |
| t.bits_per_word = bits; |
| spi_message_add_tail(&t, &m); |
| |
| mutex_lock(&edev->lock); |
| |
| if (edev->pdata->prepare) |
| edev->pdata->prepare(edev); |
| |
| ret = spi_sync(edev->spi, &m); |
| if (ret) |
| dev_err(&edev->spi->dev, "erase error %d\n", ret); |
| /* have to wait erase cycle time Tec ms */ |
| mdelay(6); |
| |
| if (pd->finish) |
| pd->finish(edev); |
| |
| mutex_unlock(&edev->lock); |
| return ret; |
| } |
| |
| static ssize_t eeprom_93xx46_store_erase(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev); |
| int erase = 0, ret; |
| |
| sscanf(buf, "%d", &erase); |
| if (erase) { |
| ret = eeprom_93xx46_ew(edev, 1); |
| if (ret) |
| return ret; |
| ret = eeprom_93xx46_eral(edev); |
| if (ret) |
| return ret; |
| ret = eeprom_93xx46_ew(edev, 0); |
| if (ret) |
| return ret; |
| } |
| return count; |
| } |
| static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase); |
| |
| static int eeprom_93xx46_probe(struct spi_device *spi) |
| { |
| struct eeprom_93xx46_platform_data *pd; |
| struct eeprom_93xx46_dev *edev; |
| int err; |
| |
| pd = spi->dev.platform_data; |
| if (!pd) { |
| dev_err(&spi->dev, "missing platform data\n"); |
| return -ENODEV; |
| } |
| |
| edev = kzalloc(sizeof(*edev), GFP_KERNEL); |
| if (!edev) |
| return -ENOMEM; |
| |
| if (pd->flags & EE_ADDR8) |
| edev->addrlen = 7; |
| else if (pd->flags & EE_ADDR16) |
| edev->addrlen = 6; |
| else { |
| dev_err(&spi->dev, "unspecified address type\n"); |
| err = -EINVAL; |
| goto fail; |
| } |
| |
| mutex_init(&edev->lock); |
| |
| edev->spi = spi_dev_get(spi); |
| edev->pdata = pd; |
| |
| sysfs_bin_attr_init(&edev->bin); |
| edev->bin.attr.name = "eeprom"; |
| edev->bin.attr.mode = S_IRUSR; |
| edev->bin.read = eeprom_93xx46_bin_read; |
| edev->bin.size = 128; |
| if (!(pd->flags & EE_READONLY)) { |
| edev->bin.write = eeprom_93xx46_bin_write; |
| edev->bin.attr.mode |= S_IWUSR; |
| } |
| |
| err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin); |
| if (err) |
| goto fail; |
| |
| dev_info(&spi->dev, "%d-bit eeprom %s\n", |
| (pd->flags & EE_ADDR8) ? 8 : 16, |
| (pd->flags & EE_READONLY) ? "(readonly)" : ""); |
| |
| if (!(pd->flags & EE_READONLY)) { |
| if (device_create_file(&spi->dev, &dev_attr_erase)) |
| dev_err(&spi->dev, "can't create erase interface\n"); |
| } |
| |
| spi_set_drvdata(spi, edev); |
| return 0; |
| fail: |
| kfree(edev); |
| return err; |
| } |
| |
| static int eeprom_93xx46_remove(struct spi_device *spi) |
| { |
| struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi); |
| |
| if (!(edev->pdata->flags & EE_READONLY)) |
| device_remove_file(&spi->dev, &dev_attr_erase); |
| |
| sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin); |
| kfree(edev); |
| return 0; |
| } |
| |
| static struct spi_driver eeprom_93xx46_driver = { |
| .driver = { |
| .name = "93xx46", |
| .owner = THIS_MODULE, |
| }, |
| .probe = eeprom_93xx46_probe, |
| .remove = eeprom_93xx46_remove, |
| }; |
| |
| module_spi_driver(eeprom_93xx46_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs"); |
| MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>"); |
| MODULE_ALIAS("spi:93xx46"); |