neofb: drop the xtimings structure
Remove the xtimings structure which only stored some values to be used
later (mostly once). Calculate and use these values in places they are
needed.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index 669b8c1..25172b2 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -259,15 +259,20 @@
*/
static int vgaHWInit(const struct fb_var_screeninfo *var,
- const struct fb_info *info,
- struct neofb_par *par, struct xtimings *timings)
+ struct neofb_par *par)
{
+ int hsync_end = var->xres + var->right_margin + var->hsync_len;
+ int htotal = (hsync_end + var->left_margin) >> 3;
+ int vsync_start = var->yres + var->lower_margin;
+ int vsync_end = vsync_start + var->vsync_len;
+ int vtotal = vsync_end + var->upper_margin;
+
par->MiscOutReg = 0x23;
- if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT))
+ if (!(var->sync & FB_SYNC_HOR_HIGH_ACT))
par->MiscOutReg |= 0x40;
- if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT))
+ if (!(var->sync & FB_SYNC_VERT_HIGH_ACT))
par->MiscOutReg |= 0x80;
/*
@@ -282,25 +287,25 @@
/*
* CRTC Controller
*/
- par->CRTC[0] = (timings->HTotal >> 3) - 5;
- par->CRTC[1] = (timings->HDisplay >> 3) - 1;
- par->CRTC[2] = (timings->HDisplay >> 3) - 1;
- par->CRTC[3] = (((timings->HTotal >> 3) - 1) & 0x1F) | 0x80;
- par->CRTC[4] = (timings->HSyncStart >> 3);
- par->CRTC[5] = ((((timings->HTotal >> 3) - 1) & 0x20) << 2)
- | (((timings->HSyncEnd >> 3)) & 0x1F);
- par->CRTC[6] = (timings->VTotal - 2) & 0xFF;
- par->CRTC[7] = (((timings->VTotal - 2) & 0x100) >> 8)
- | (((timings->VDisplay - 1) & 0x100) >> 7)
- | ((timings->VSyncStart & 0x100) >> 6)
- | (((timings->VDisplay - 1) & 0x100) >> 5)
- | 0x10 | (((timings->VTotal - 2) & 0x200) >> 4)
- | (((timings->VDisplay - 1) & 0x200) >> 3)
- | ((timings->VSyncStart & 0x200) >> 2);
+ par->CRTC[0] = htotal - 5;
+ par->CRTC[1] = (var->xres >> 3) - 1;
+ par->CRTC[2] = (var->xres >> 3) - 1;
+ par->CRTC[3] = ((htotal - 1) & 0x1F) | 0x80;
+ par->CRTC[4] = ((var->xres + var->right_margin) >> 3);
+ par->CRTC[5] = (((htotal - 1) & 0x20) << 2)
+ | (((hsync_end >> 3)) & 0x1F);
+ par->CRTC[6] = (vtotal - 2) & 0xFF;
+ par->CRTC[7] = (((vtotal - 2) & 0x100) >> 8)
+ | (((var->yres - 1) & 0x100) >> 7)
+ | ((vsync_start & 0x100) >> 6)
+ | (((var->yres - 1) & 0x100) >> 5)
+ | 0x10 | (((vtotal - 2) & 0x200) >> 4)
+ | (((var->yres - 1) & 0x200) >> 3)
+ | ((vsync_start & 0x200) >> 2);
par->CRTC[8] = 0x00;
- par->CRTC[9] = (((timings->VDisplay - 1) & 0x200) >> 4) | 0x40;
+ par->CRTC[9] = (((var->yres - 1) & 0x200) >> 4) | 0x40;
- if (timings->dblscan)
+ if (var->vmode & FB_VMODE_DOUBLE)
par->CRTC[9] |= 0x80;
par->CRTC[10] = 0x00;
@@ -309,13 +314,13 @@
par->CRTC[13] = 0x00;
par->CRTC[14] = 0x00;
par->CRTC[15] = 0x00;
- par->CRTC[16] = timings->VSyncStart & 0xFF;
- par->CRTC[17] = (timings->VSyncEnd & 0x0F) | 0x20;
- par->CRTC[18] = (timings->VDisplay - 1) & 0xFF;
+ par->CRTC[16] = vsync_start & 0xFF;
+ par->CRTC[17] = (vsync_end & 0x0F) | 0x20;
+ par->CRTC[18] = (var->yres - 1) & 0xFF;
par->CRTC[19] = var->xres_virtual >> 4;
par->CRTC[20] = 0x00;
- par->CRTC[21] = (timings->VDisplay - 1) & 0xFF;
- par->CRTC[22] = (timings->VTotal - 1) & 0xFF;
+ par->CRTC[21] = (var->yres - 1) & 0xFF;
+ par->CRTC[22] = (vtotal - 1) & 0xFF;
par->CRTC[23] = 0xC3;
par->CRTC[24] = 0xFF;
@@ -736,11 +741,11 @@
static int neofb_set_par(struct fb_info *info)
{
struct neofb_par *par = info->par;
- struct xtimings timings;
unsigned char temp;
int i, clock_hi = 0;
int lcd_stretch;
int hoffset, voffset;
+ int vsync_start, vtotal;
DBG("neofb_set_par");
@@ -748,28 +753,15 @@
vgaHWProtect(1); /* Blank the screen */
- timings.dblscan = info->var.vmode & FB_VMODE_DOUBLE;
- timings.interlaced = info->var.vmode & FB_VMODE_INTERLACED;
- timings.HDisplay = info->var.xres;
- timings.HSyncStart = timings.HDisplay + info->var.right_margin;
- timings.HSyncEnd = timings.HSyncStart + info->var.hsync_len;
- timings.HTotal = timings.HSyncEnd + info->var.left_margin;
- timings.VDisplay = info->var.yres;
- timings.VSyncStart = timings.VDisplay + info->var.lower_margin;
- timings.VSyncEnd = timings.VSyncStart + info->var.vsync_len;
- timings.VTotal = timings.VSyncEnd + info->var.upper_margin;
- timings.sync = info->var.sync;
- timings.pixclock = PICOS2KHZ(info->var.pixclock);
-
- if (timings.pixclock < 1)
- timings.pixclock = 1;
+ vsync_start = info->var.yres + info->var.lower_margin;
+ vtotal = vsync_start + info->var.vsync_len + info->var.upper_margin;
/*
* This will allocate the datastructure and initialize all of the
* generic VGA registers.
*/
- if (vgaHWInit(&info->var, info, par, &timings))
+ if (vgaHWInit(&info->var, par))
return -EINVAL;
/*
@@ -808,10 +800,10 @@
par->ExtCRTDispAddr = 0x10;
/* Vertical Extension */
- par->VerticalExt = (((timings.VTotal - 2) & 0x400) >> 10)
- | (((timings.VDisplay - 1) & 0x400) >> 9)
- | (((timings.VSyncStart) & 0x400) >> 8)
- | (((timings.VSyncStart) & 0x400) >> 7);
+ par->VerticalExt = (((vtotal - 2) & 0x400) >> 10)
+ | (((info->var.yres - 1) & 0x400) >> 9)
+ | (((vsync_start) & 0x400) >> 8)
+ | (((vsync_start) & 0x400) >> 7);
/* Fast write bursts on unless disabled. */
if (par->pci_burst)
@@ -972,7 +964,7 @@
* Calculate the VCLK that most closely matches the requested dot
* clock.
*/
- neoCalcVCLK(info, par, timings.pixclock);
+ neoCalcVCLK(info, par, PICOS2KHZ(info->var.pixclock));
/* Since we program the clocks ourselves, always use VCLK3. */
par->MiscOutReg |= 0x0C;