| /* |
| * KFR2R09 board support code |
| * |
| * Copyright (C) 2009 Magnus Damm |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sh_mobile_sdhi.h> |
| #include <linux/mfd/tmio.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/gpio.h> |
| #include <linux/input.h> |
| #include <linux/input/sh_keysc.h> |
| #include <linux/i2c.h> |
| #include <linux/usb/r8a66597.h> |
| #include <linux/videodev2.h> |
| #include <linux/sh_intc.h> |
| #include <media/rj54n1cb0c.h> |
| #include <media/soc_camera.h> |
| #include <media/sh_mobile_ceu.h> |
| #include <video/sh_mobile_lcdc.h> |
| #include <asm/suspend.h> |
| #include <asm/clock.h> |
| #include <asm/machvec.h> |
| #include <asm/io.h> |
| #include <cpu/sh7724.h> |
| #include <mach/kfr2r09.h> |
| |
| static struct mtd_partition kfr2r09_nor_flash_partitions[] = |
| { |
| { |
| .name = "boot", |
| .offset = 0, |
| .size = (4 * 1024 * 1024), |
| .mask_flags = MTD_WRITEABLE, /* Read-only */ |
| }, |
| { |
| .name = "other", |
| .offset = MTDPART_OFS_APPEND, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| static struct physmap_flash_data kfr2r09_nor_flash_data = { |
| .width = 2, |
| .parts = kfr2r09_nor_flash_partitions, |
| .nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions), |
| }; |
| |
| static struct resource kfr2r09_nor_flash_resources[] = { |
| [0] = { |
| .name = "NOR Flash", |
| .start = 0x00000000, |
| .end = 0x03ffffff, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device kfr2r09_nor_flash_device = { |
| .name = "physmap-flash", |
| .resource = kfr2r09_nor_flash_resources, |
| .num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources), |
| .dev = { |
| .platform_data = &kfr2r09_nor_flash_data, |
| }, |
| }; |
| |
| static struct resource kfr2r09_nand_flash_resources[] = { |
| [0] = { |
| .name = "NAND Flash", |
| .start = 0x10000000, |
| .end = 0x1001ffff, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device kfr2r09_nand_flash_device = { |
| .name = "onenand-flash", |
| .resource = kfr2r09_nand_flash_resources, |
| .num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources), |
| }; |
| |
| static struct sh_keysc_info kfr2r09_sh_keysc_info = { |
| .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */ |
| .scan_timing = 3, |
| .delay = 10, |
| .keycodes = { |
| KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER, |
| KEY_1, KEY_2, KEY_3, 0, KEY_UP, |
| KEY_4, KEY_5, KEY_6, 0, KEY_LEFT, |
| KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT, |
| KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN, |
| 0, 0, 0, 0, 0 |
| }, |
| }; |
| |
| static struct resource kfr2r09_sh_keysc_resources[] = { |
| [0] = { |
| .name = "KEYSC", |
| .start = 0x044b0000, |
| .end = 0x044b000f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0xbe0), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device kfr2r09_sh_keysc_device = { |
| .name = "sh_keysc", |
| .id = 0, /* "keysc0" clock */ |
| .num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources), |
| .resource = kfr2r09_sh_keysc_resources, |
| .dev = { |
| .platform_data = &kfr2r09_sh_keysc_info, |
| }, |
| }; |
| |
| static const struct fb_videomode kfr2r09_lcdc_modes[] = { |
| { |
| .name = "TX07D34VM0AAA", |
| .xres = 240, |
| .yres = 400, |
| .left_margin = 0, |
| .right_margin = 16, |
| .hsync_len = 8, |
| .upper_margin = 0, |
| .lower_margin = 1, |
| .vsync_len = 1, |
| .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, |
| }, |
| }; |
| |
| static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { |
| .clock_source = LCDC_CLK_BUS, |
| .ch[0] = { |
| .chan = LCDC_CHAN_MAINLCD, |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .interface_type = SYS18, |
| .clock_divider = 6, |
| .flags = LCDC_FLAGS_DWPOL, |
| .lcd_modes = kfr2r09_lcdc_modes, |
| .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes), |
| .panel_cfg = { |
| .width = 35, |
| .height = 58, |
| .setup_sys = kfr2r09_lcd_setup, |
| .start_transfer = kfr2r09_lcd_start, |
| .display_on = kfr2r09_lcd_on, |
| .display_off = kfr2r09_lcd_off, |
| }, |
| .sys_bus_cfg = { |
| .ldmt2r = 0x07010904, |
| .ldmt3r = 0x14012914, |
| /* set 1s delay to encourage fsync() */ |
| .deferred_io_msec = 1000, |
| }, |
| } |
| }; |
| |
| static struct resource kfr2r09_sh_lcdc_resources[] = { |
| [0] = { |
| .name = "LCDC", |
| .start = 0xfe940000, /* P4-only space */ |
| .end = 0xfe942fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0xf40), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device kfr2r09_sh_lcdc_device = { |
| .name = "sh_mobile_lcdc_fb", |
| .num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources), |
| .resource = kfr2r09_sh_lcdc_resources, |
| .dev = { |
| .platform_data = &kfr2r09_sh_lcdc_info, |
| }, |
| }; |
| |
| static struct r8a66597_platdata kfr2r09_usb0_gadget_data = { |
| .on_chip = 1, |
| }; |
| |
| static struct resource kfr2r09_usb0_gadget_resources[] = { |
| [0] = { |
| .start = 0x04d80000, |
| .end = 0x04d80123, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0xa20), |
| .end = evt2irq(0xa20), |
| .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, |
| }, |
| }; |
| |
| static struct platform_device kfr2r09_usb0_gadget_device = { |
| .name = "r8a66597_udc", |
| .id = 0, |
| .dev = { |
| .dma_mask = NULL, /* not use dma */ |
| .coherent_dma_mask = 0xffffffff, |
| .platform_data = &kfr2r09_usb0_gadget_data, |
| }, |
| .num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources), |
| .resource = kfr2r09_usb0_gadget_resources, |
| }; |
| |
| static struct sh_mobile_ceu_info sh_mobile_ceu_info = { |
| .flags = SH_CEU_FLAG_USE_8BIT_BUS, |
| }; |
| |
| static struct resource kfr2r09_ceu_resources[] = { |
| [0] = { |
| .name = "CEU", |
| .start = 0xfe910000, |
| .end = 0xfe91009f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x880), |
| .end = evt2irq(0x880), |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| /* place holder for contiguous memory */ |
| }, |
| }; |
| |
| static struct platform_device kfr2r09_ceu_device = { |
| .name = "sh_mobile_ceu", |
| .id = 0, /* "ceu0" clock */ |
| .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources), |
| .resource = kfr2r09_ceu_resources, |
| .dev = { |
| .platform_data = &sh_mobile_ceu_info, |
| }, |
| }; |
| |
| static struct i2c_board_info kfr2r09_i2c_camera = { |
| I2C_BOARD_INFO("rj54n1cb0c", 0x50), |
| }; |
| |
| static struct clk *camera_clk; |
| |
| /* set VIO_CKO clock to 25MHz */ |
| #define CEU_MCLK_FREQ 25000000 |
| |
| #define DRVCRB 0xA405018C |
| static int camera_power(struct device *dev, int mode) |
| { |
| int ret; |
| |
| if (mode) { |
| long rate; |
| |
| camera_clk = clk_get(NULL, "video_clk"); |
| if (IS_ERR(camera_clk)) |
| return PTR_ERR(camera_clk); |
| |
| rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ); |
| ret = clk_set_rate(camera_clk, rate); |
| if (ret < 0) |
| goto eclkrate; |
| |
| /* set DRVCRB |
| * |
| * use 1.8 V for VccQ_VIO |
| * use 2.85V for VccQ_SR |
| */ |
| __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); |
| |
| /* reset clear */ |
| ret = gpio_request(GPIO_PTB4, NULL); |
| if (ret < 0) |
| goto eptb4; |
| ret = gpio_request(GPIO_PTB7, NULL); |
| if (ret < 0) |
| goto eptb7; |
| |
| ret = gpio_direction_output(GPIO_PTB4, 1); |
| if (!ret) |
| ret = gpio_direction_output(GPIO_PTB7, 1); |
| if (ret < 0) |
| goto egpioout; |
| msleep(1); |
| |
| ret = clk_enable(camera_clk); /* start VIO_CKO */ |
| if (ret < 0) |
| goto eclkon; |
| |
| return 0; |
| } |
| |
| ret = 0; |
| |
| clk_disable(camera_clk); |
| eclkon: |
| gpio_set_value(GPIO_PTB7, 0); |
| egpioout: |
| gpio_set_value(GPIO_PTB4, 0); |
| gpio_free(GPIO_PTB7); |
| eptb7: |
| gpio_free(GPIO_PTB4); |
| eptb4: |
| eclkrate: |
| clk_put(camera_clk); |
| return ret; |
| } |
| |
| static struct rj54n1_pdata rj54n1_priv = { |
| .mclk_freq = CEU_MCLK_FREQ, |
| .ioctl_high = false, |
| }; |
| |
| static struct soc_camera_link rj54n1_link = { |
| .power = camera_power, |
| .board_info = &kfr2r09_i2c_camera, |
| .i2c_adapter_id = 1, |
| .priv = &rj54n1_priv, |
| }; |
| |
| static struct platform_device kfr2r09_camera = { |
| .name = "soc-camera-pdrv", |
| .id = 0, |
| .dev = { |
| .platform_data = &rj54n1_link, |
| }, |
| }; |
| |
| static struct resource kfr2r09_sh_sdhi0_resources[] = { |
| [0] = { |
| .name = "SDHI0", |
| .start = 0x04ce0000, |
| .end = 0x04ce00ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0xe80), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct sh_mobile_sdhi_info sh7724_sdhi0_data = { |
| .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, |
| .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, |
| .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, |
| .tmio_caps = MMC_CAP_SDIO_IRQ, |
| }; |
| |
| static struct platform_device kfr2r09_sh_sdhi0_device = { |
| .name = "sh_mobile_sdhi", |
| .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources), |
| .resource = kfr2r09_sh_sdhi0_resources, |
| .dev = { |
| .platform_data = &sh7724_sdhi0_data, |
| }, |
| }; |
| |
| static struct platform_device *kfr2r09_devices[] __initdata = { |
| &kfr2r09_nor_flash_device, |
| &kfr2r09_nand_flash_device, |
| &kfr2r09_sh_keysc_device, |
| &kfr2r09_sh_lcdc_device, |
| &kfr2r09_ceu_device, |
| &kfr2r09_camera, |
| &kfr2r09_sh_sdhi0_device, |
| }; |
| |
| #define BSC_CS0BCR 0xfec10004 |
| #define BSC_CS0WCR 0xfec10024 |
| #define BSC_CS4BCR 0xfec10010 |
| #define BSC_CS4WCR 0xfec10030 |
| #define PORT_MSELCRB 0xa4050182 |
| |
| #ifdef CONFIG_I2C |
| static int kfr2r09_usb0_gadget_i2c_setup(void) |
| { |
| struct i2c_adapter *a; |
| struct i2c_msg msg; |
| unsigned char buf[2]; |
| int ret; |
| |
| a = i2c_get_adapter(0); |
| if (!a) |
| return -ENODEV; |
| |
| /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */ |
| buf[0] = 0x13; |
| msg.addr = 0x09; |
| msg.buf = buf; |
| msg.len = 1; |
| msg.flags = 0; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| buf[0] = 0; |
| msg.addr = 0x09; |
| msg.buf = buf; |
| msg.len = 1; |
| msg.flags = I2C_M_RD; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| buf[1] = buf[0] | (1 << 1); |
| buf[0] = 0x13; |
| msg.addr = 0x09; |
| msg.buf = buf; |
| msg.len = 2; |
| msg.flags = 0; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int kfr2r09_serial_i2c_setup(void) |
| { |
| struct i2c_adapter *a; |
| struct i2c_msg msg; |
| unsigned char buf[2]; |
| int ret; |
| |
| a = i2c_get_adapter(0); |
| if (!a) |
| return -ENODEV; |
| |
| /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */ |
| buf[0] = 0x13; |
| msg.addr = 0x09; |
| msg.buf = buf; |
| msg.len = 1; |
| msg.flags = 0; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| buf[0] = 0; |
| msg.addr = 0x09; |
| msg.buf = buf; |
| msg.len = 1; |
| msg.flags = I2C_M_RD; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| buf[1] = buf[0] | (1 << 6); |
| buf[0] = 0x13; |
| msg.addr = 0x09; |
| msg.buf = buf; |
| msg.len = 2; |
| msg.flags = 0; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| return 0; |
| } |
| #else |
| static int kfr2r09_usb0_gadget_i2c_setup(void) |
| { |
| return -ENODEV; |
| } |
| |
| static int kfr2r09_serial_i2c_setup(void) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| static int kfr2r09_usb0_gadget_setup(void) |
| { |
| int plugged_in; |
| |
| gpio_request(GPIO_PTN4, NULL); /* USB_DET */ |
| gpio_direction_input(GPIO_PTN4); |
| plugged_in = gpio_get_value(GPIO_PTN4); |
| if (!plugged_in) |
| return -ENODEV; /* no cable plugged in */ |
| |
| if (kfr2r09_usb0_gadget_i2c_setup() != 0) |
| return -ENODEV; /* unable to configure using i2c */ |
| |
| __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); |
| gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */ |
| gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */ |
| gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ |
| msleep(20); /* wait 20ms to let the clock settle */ |
| clk_enable(clk_get(NULL, "usb0")); |
| __raw_writew(0x0600, 0xa40501d4); |
| |
| return 0; |
| } |
| |
| extern char kfr2r09_sdram_enter_start; |
| extern char kfr2r09_sdram_enter_end; |
| extern char kfr2r09_sdram_leave_start; |
| extern char kfr2r09_sdram_leave_end; |
| |
| static int __init kfr2r09_devices_setup(void) |
| { |
| /* register board specific self-refresh code */ |
| sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | |
| SUSP_SH_RSTANDBY, |
| &kfr2r09_sdram_enter_start, |
| &kfr2r09_sdram_enter_end, |
| &kfr2r09_sdram_leave_start, |
| &kfr2r09_sdram_leave_end); |
| |
| /* enable SCIF1 serial port for YC401 console support */ |
| gpio_request(GPIO_FN_SCIF1_RXD, NULL); |
| gpio_request(GPIO_FN_SCIF1_TXD, NULL); |
| kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */ |
| gpio_request(GPIO_PTG3, NULL); /* HPON_ON */ |
| gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ |
| |
| /* setup NOR flash at CS0 */ |
| __raw_writel(0x36db0400, BSC_CS0BCR); |
| __raw_writel(0x00000500, BSC_CS0WCR); |
| |
| /* setup NAND flash at CS4 */ |
| __raw_writel(0x36db0400, BSC_CS4BCR); |
| __raw_writel(0x00000500, BSC_CS4WCR); |
| |
| /* setup KEYSC pins */ |
| gpio_request(GPIO_FN_KEYOUT0, NULL); |
| gpio_request(GPIO_FN_KEYOUT1, NULL); |
| gpio_request(GPIO_FN_KEYOUT2, NULL); |
| gpio_request(GPIO_FN_KEYOUT3, NULL); |
| gpio_request(GPIO_FN_KEYOUT4_IN6, NULL); |
| gpio_request(GPIO_FN_KEYIN0, NULL); |
| gpio_request(GPIO_FN_KEYIN1, NULL); |
| gpio_request(GPIO_FN_KEYIN2, NULL); |
| gpio_request(GPIO_FN_KEYIN3, NULL); |
| gpio_request(GPIO_FN_KEYIN4, NULL); |
| gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); |
| |
| /* setup LCDC pins for SYS panel */ |
| gpio_request(GPIO_FN_LCDD17, NULL); |
| gpio_request(GPIO_FN_LCDD16, NULL); |
| gpio_request(GPIO_FN_LCDD15, NULL); |
| gpio_request(GPIO_FN_LCDD14, NULL); |
| gpio_request(GPIO_FN_LCDD13, NULL); |
| gpio_request(GPIO_FN_LCDD12, NULL); |
| gpio_request(GPIO_FN_LCDD11, NULL); |
| gpio_request(GPIO_FN_LCDD10, NULL); |
| gpio_request(GPIO_FN_LCDD9, NULL); |
| gpio_request(GPIO_FN_LCDD8, NULL); |
| gpio_request(GPIO_FN_LCDD7, NULL); |
| gpio_request(GPIO_FN_LCDD6, NULL); |
| gpio_request(GPIO_FN_LCDD5, NULL); |
| gpio_request(GPIO_FN_LCDD4, NULL); |
| gpio_request(GPIO_FN_LCDD3, NULL); |
| gpio_request(GPIO_FN_LCDD2, NULL); |
| gpio_request(GPIO_FN_LCDD1, NULL); |
| gpio_request(GPIO_FN_LCDD0, NULL); |
| gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */ |
| gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */ |
| gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */ |
| gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */ |
| gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */ |
| gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */ |
| gpio_direction_output(GPIO_PTE4, 1); |
| gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */ |
| gpio_direction_output(GPIO_PTF4, 1); |
| gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */ |
| gpio_direction_output(GPIO_PTU0, 1); |
| |
| /* setup USB function */ |
| if (kfr2r09_usb0_gadget_setup() == 0) |
| platform_device_register(&kfr2r09_usb0_gadget_device); |
| |
| /* CEU */ |
| gpio_request(GPIO_FN_VIO_CKO, NULL); |
| gpio_request(GPIO_FN_VIO0_CLK, NULL); |
| gpio_request(GPIO_FN_VIO0_VD, NULL); |
| gpio_request(GPIO_FN_VIO0_HD, NULL); |
| gpio_request(GPIO_FN_VIO0_FLD, NULL); |
| gpio_request(GPIO_FN_VIO0_D7, NULL); |
| gpio_request(GPIO_FN_VIO0_D6, NULL); |
| gpio_request(GPIO_FN_VIO0_D5, NULL); |
| gpio_request(GPIO_FN_VIO0_D4, NULL); |
| gpio_request(GPIO_FN_VIO0_D3, NULL); |
| gpio_request(GPIO_FN_VIO0_D2, NULL); |
| gpio_request(GPIO_FN_VIO0_D1, NULL); |
| gpio_request(GPIO_FN_VIO0_D0, NULL); |
| |
| platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20); |
| |
| /* SDHI0 connected to yc304 */ |
| gpio_request(GPIO_FN_SDHI0CD, NULL); |
| gpio_request(GPIO_FN_SDHI0D3, NULL); |
| gpio_request(GPIO_FN_SDHI0D2, NULL); |
| gpio_request(GPIO_FN_SDHI0D1, NULL); |
| gpio_request(GPIO_FN_SDHI0D0, NULL); |
| gpio_request(GPIO_FN_SDHI0CMD, NULL); |
| gpio_request(GPIO_FN_SDHI0CLK, NULL); |
| |
| return platform_add_devices(kfr2r09_devices, |
| ARRAY_SIZE(kfr2r09_devices)); |
| } |
| device_initcall(kfr2r09_devices_setup); |
| |
| /* Return the board specific boot mode pin configuration */ |
| static int kfr2r09_mode_pins(void) |
| { |
| /* MD0=1, MD1=1, MD2=0: Clock Mode 3 |
| * MD3=0: 16-bit Area0 Bus Width |
| * MD5=1: Little Endian |
| * MD8=1: Test Mode Disabled |
| */ |
| return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8; |
| } |
| |
| /* |
| * The Machine Vector |
| */ |
| static struct sh_machine_vector mv_kfr2r09 __initmv = { |
| .mv_name = "kfr2r09", |
| .mv_mode_pins = kfr2r09_mode_pins, |
| }; |