Merge tag 'nfc-next-3.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel says:
"This is the 2nd NFC pull request.
With this one we have a new NFC driver for Inside Secure microread and a few
pn533 fixes.
Microread is an HCI based NFC IP and the driver we're pushing supports tags
R/W, and NFC p2p. It's supported over the i2c and MEI busses."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index 80c728b..e570349 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -27,5 +27,6 @@
into the kernel or say M to compile it as module.
source "drivers/nfc/pn544/Kconfig"
+source "drivers/nfc/microread/Kconfig"
endmenu
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index 574bbc0..a189ada0 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_NFC_PN544) += pn544/
+obj-$(CONFIG_NFC_MICROREAD) += microread/
obj-$(CONFIG_NFC_PN533) += pn533.o
obj-$(CONFIG_NFC_WILINK) += nfcwilink.o
diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig
new file mode 100644
index 0000000..572305b
--- /dev/null
+++ b/drivers/nfc/microread/Kconfig
@@ -0,0 +1,35 @@
+config NFC_MICROREAD
+ tristate "Inside Secure microread NFC driver"
+ depends on NFC_HCI
+ select CRC_CCITT
+ default n
+ ---help---
+ This module contains the main code for Inside Secure microread
+ NFC chipsets. It implements the chipset HCI logic and hooks into
+ the NFC kernel APIs. Physical layers will register against it.
+
+ To compile this driver as a module, choose m here. The module will
+ be called microread.
+ Say N if unsure.
+
+config NFC_MICROREAD_I2C
+ tristate "NFC Microread i2c support"
+ depends on NFC_MICROREAD && I2C && NFC_SHDLC
+ ---help---
+ This module adds support for the i2c interface of adapters using
+ Inside microread chipsets. Select this if your platform is using
+ the i2c bus.
+
+ If you choose to build a module, it'll be called microread_i2c.
+ Say N if unsure.
+
+config NFC_MICROREAD_MEI
+ tristate "NFC Microread MEI support"
+ depends on NFC_MICROREAD && INTEL_MEI_BUS_NFC
+ ---help---
+ This module adds support for the mei interface of adapters using
+ Inside microread chipsets. Select this if your microread chipset
+ is handled by Intel's Management Engine Interface on your platform.
+
+ If you choose to build a module, it'll be called microread_mei.
+ Say N if unsure.
diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile
new file mode 100644
index 0000000..755c24c
--- /dev/null
+++ b/drivers/nfc/microread/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for Microread HCI based NFC driver
+#
+
+microread_i2c-objs = i2c.o
+microread_mei-objs = mei.o
+
+obj-$(CONFIG_NFC_MICROREAD) += microread.o
+obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o
+obj-$(CONFIG_NFC_MICROREAD_MEI) += microread_mei.o
diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c
new file mode 100644
index 0000000..1010894
--- /dev/null
+++ b/drivers/nfc/microread/i2c.c
@@ -0,0 +1,340 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip - i2c layer
+ *
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "microread.h"
+
+#define MICROREAD_I2C_DRIVER_NAME "microread"
+
+#define MICROREAD_I2C_FRAME_HEADROOM 1
+#define MICROREAD_I2C_FRAME_TAILROOM 1
+
+/* framing in HCI mode */
+#define MICROREAD_I2C_LLC_LEN 1
+#define MICROREAD_I2C_LLC_CRC 1
+#define MICROREAD_I2C_LLC_LEN_CRC (MICROREAD_I2C_LLC_LEN + \
+ MICROREAD_I2C_LLC_CRC)
+#define MICROREAD_I2C_LLC_MIN_SIZE (1 + MICROREAD_I2C_LLC_LEN_CRC)
+#define MICROREAD_I2C_LLC_MAX_PAYLOAD 29
+#define MICROREAD_I2C_LLC_MAX_SIZE (MICROREAD_I2C_LLC_LEN_CRC + 1 + \
+ MICROREAD_I2C_LLC_MAX_PAYLOAD)
+
+struct microread_i2c_phy {
+ struct i2c_client *i2c_dev;
+ struct nfc_hci_dev *hdev;
+
+ int irq;
+
+ int hard_fault; /*
+ * < 0 if hardware error occured (e.g. i2c err)
+ * and prevents normal operation.
+ */
+};
+
+#define I2C_DUMP_SKB(info, skb) \
+do { \
+ pr_debug("%s:\n", info); \
+ print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \
+ 16, 1, (skb)->data, (skb)->len, 0); \
+} while (0)
+
+static void microread_i2c_add_len_crc(struct sk_buff *skb)
+{
+ int i;
+ u8 crc = 0;
+ int len;
+
+ len = skb->len;
+ *skb_push(skb, 1) = len;
+
+ for (i = 0; i < skb->len; i++)
+ crc = crc ^ skb->data[i];
+
+ *skb_put(skb, 1) = crc;
+}
+
+static void microread_i2c_remove_len_crc(struct sk_buff *skb)
+{
+ skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM);
+ skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM);
+}
+
+static int check_crc(struct sk_buff *skb)
+{
+ int i;
+ u8 crc = 0;
+
+ for (i = 0; i < skb->len - 1; i++)
+ crc = crc ^ skb->data[i];
+
+ if (crc != skb->data[skb->len-1]) {
+ pr_err(MICROREAD_I2C_DRIVER_NAME
+ ": CRC error 0x%x != 0x%x\n",
+ crc, skb->data[skb->len-1]);
+
+ pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__);
+
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+static int microread_i2c_enable(void *phy_id)
+{
+ return 0;
+}
+
+static void microread_i2c_disable(void *phy_id)
+{
+ return;
+}
+
+static int microread_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+ int r;
+ struct microread_i2c_phy *phy = phy_id;
+ struct i2c_client *client = phy->i2c_dev;
+
+ if (phy->hard_fault != 0)
+ return phy->hard_fault;
+
+ usleep_range(3000, 6000);
+
+ microread_i2c_add_len_crc(skb);
+
+ I2C_DUMP_SKB("i2c frame written", skb);
+
+ r = i2c_master_send(client, skb->data, skb->len);
+
+ if (r == -EREMOTEIO) { /* Retry, chip was in standby */
+ usleep_range(6000, 10000);
+ r = i2c_master_send(client, skb->data, skb->len);
+ }
+
+ if (r >= 0) {
+ if (r != skb->len)
+ r = -EREMOTEIO;
+ else
+ r = 0;
+ }
+
+ microread_i2c_remove_len_crc(skb);
+
+ return r;
+}
+
+
+static int microread_i2c_read(struct microread_i2c_phy *phy,
+ struct sk_buff **skb)
+{
+ int r;
+ u8 len;
+ u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1];
+ struct i2c_client *client = phy->i2c_dev;
+
+ pr_debug("%s\n", __func__);
+
+ r = i2c_master_recv(client, &len, 1);
+ if (r != 1) {
+ dev_err(&client->dev, "cannot read len byte\n");
+ return -EREMOTEIO;
+ }
+
+ if ((len < MICROREAD_I2C_LLC_MIN_SIZE) ||
+ (len > MICROREAD_I2C_LLC_MAX_SIZE)) {
+ dev_err(&client->dev, "invalid len byte\n");
+ pr_err("invalid len byte\n");
+ r = -EBADMSG;
+ goto flush;
+ }
+
+ *skb = alloc_skb(1 + len, GFP_KERNEL);
+ if (*skb == NULL) {
+ r = -ENOMEM;
+ goto flush;
+ }
+
+ *skb_put(*skb, 1) = len;
+
+ r = i2c_master_recv(client, skb_put(*skb, len), len);
+ if (r != len) {
+ kfree_skb(*skb);
+ return -EREMOTEIO;
+ }
+
+ I2C_DUMP_SKB("cc frame read", *skb);
+
+ r = check_crc(*skb);
+ if (r != 0) {
+ kfree_skb(*skb);
+ r = -EBADMSG;
+ goto flush;
+ }
+
+ skb_pull(*skb, 1);
+ skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM);
+
+ usleep_range(3000, 6000);
+
+ return 0;
+
+flush:
+ if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
+ r = -EREMOTEIO;
+
+ usleep_range(3000, 6000);
+
+ return r;
+}
+
+static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+ struct microread_i2c_phy *phy = phy_id;
+ struct i2c_client *client;
+ struct sk_buff *skb = NULL;
+ int r;
+
+ if (!phy || irq != phy->i2c_dev->irq) {
+ WARN_ON_ONCE(1);
+ return IRQ_NONE;
+ }
+
+ client = phy->i2c_dev;
+ dev_dbg(&client->dev, "IRQ\n");
+
+ if (phy->hard_fault != 0)
+ return IRQ_HANDLED;
+
+ r = microread_i2c_read(phy, &skb);
+ if (r == -EREMOTEIO) {
+ phy->hard_fault = r;
+
+ nfc_hci_recv_frame(phy->hdev, NULL);
+
+ return IRQ_HANDLED;
+ } else if ((r == -ENOMEM) || (r == -EBADMSG)) {
+ return IRQ_HANDLED;
+ }
+
+ nfc_hci_recv_frame(phy->hdev, skb);
+
+ return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+ .write = microread_i2c_write,
+ .enable = microread_i2c_enable,
+ .disable = microread_i2c_disable,
+};
+
+static int microread_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct microread_i2c_phy *phy;
+ struct microread_nfc_platform_data *pdata =
+ dev_get_platdata(&client->dev);
+ int r;
+
+ dev_dbg(&client->dev, "client %p", client);
+
+ if (!pdata) {
+ dev_err(&client->dev, "client %p: missing platform data",
+ client);
+ return -EINVAL;
+ }
+
+ phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy),
+ GFP_KERNEL);
+ if (!phy) {
+ dev_err(&client->dev, "Can't allocate microread phy");
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(client, phy);
+ phy->i2c_dev = client;
+
+ r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ MICROREAD_I2C_DRIVER_NAME, phy);
+ if (r) {
+ dev_err(&client->dev, "Unable to register IRQ handler");
+ return r;
+ }
+
+ r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+ MICROREAD_I2C_FRAME_HEADROOM,
+ MICROREAD_I2C_FRAME_TAILROOM,
+ MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev);
+ if (r < 0)
+ goto err_irq;
+
+ dev_info(&client->dev, "Probed");
+
+ return 0;
+
+err_irq:
+ free_irq(client->irq, phy);
+
+ return r;
+}
+
+static int microread_i2c_remove(struct i2c_client *client)
+{
+ struct microread_i2c_phy *phy = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+
+ microread_remove(phy->hdev);
+
+ free_irq(client->irq, phy);
+
+ return 0;
+}
+
+static struct i2c_device_id microread_i2c_id[] = {
+ { MICROREAD_I2C_DRIVER_NAME, 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, microread_i2c_id);
+
+static struct i2c_driver microread_i2c_driver = {
+ .driver = {
+ .name = MICROREAD_I2C_DRIVER_NAME,
+ },
+ .probe = microread_i2c_probe,
+ .remove = microread_i2c_remove,
+ .id_table = microread_i2c_id,
+};
+
+module_i2c_driver(microread_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c
new file mode 100644
index 0000000..c078e56
--- /dev/null
+++ b/drivers/nfc/microread/mei.c
@@ -0,0 +1,241 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip
+ *
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/mei_bus.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "microread.h"
+
+#define MICROREAD_DRIVER_NAME "microread"
+
+#define MICROREAD_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, \
+ 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c)
+
+struct mei_nfc_hdr {
+ u8 cmd;
+ u8 status;
+ u16 req_id;
+ u32 reserved;
+ u16 data_size;
+} __attribute__((packed));
+
+#define MEI_NFC_HEADER_SIZE 10
+#define MEI_NFC_MAX_HCI_PAYLOAD 300
+#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD)
+
+struct microread_mei_phy {
+ struct mei_bus_client *client;
+ struct nfc_hci_dev *hdev;
+
+ int powered;
+
+ int hard_fault; /*
+ * < 0 if hardware error occured (e.g. i2c err)
+ * and prevents normal operation.
+ */
+};
+
+#define MEI_DUMP_SKB_IN(info, skb) \
+do { \
+ pr_debug("%s:\n", info); \
+ print_hex_dump(KERN_DEBUG, "mei in : ", DUMP_PREFIX_OFFSET, \
+ 16, 1, (skb)->data, (skb)->len, 0); \
+} while (0)
+
+#define MEI_DUMP_SKB_OUT(info, skb) \
+do { \
+ pr_debug("%s:\n", info); \
+ print_hex_dump(KERN_DEBUG, "mei out: ", DUMP_PREFIX_OFFSET, \
+ 16, 1, (skb)->data, (skb)->len, 0); \
+} while (0)
+
+static int microread_mei_enable(void *phy_id)
+{
+ struct microread_mei_phy *phy = phy_id;
+
+ pr_info(DRIVER_DESC ": %s\n", __func__);
+
+ phy->powered = 1;
+
+ return 0;
+}
+
+static void microread_mei_disable(void *phy_id)
+{
+ struct microread_mei_phy *phy = phy_id;
+
+ pr_info(DRIVER_DESC ": %s\n", __func__);
+
+ phy->powered = 0;
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int microread_mei_write(void *phy_id, struct sk_buff *skb)
+{
+ struct microread_mei_phy *phy = phy_id;
+ int r;
+
+ MEI_DUMP_SKB_OUT("mei frame sent", skb);
+
+ r = mei_bus_send(phy->client, skb->data, skb->len);
+ if (r > 0)
+ r = 0;
+
+ return r;
+}
+
+static void microread_event_cb(struct mei_bus_client *client, u32 events,
+ void *context)
+{
+ struct microread_mei_phy *phy = context;
+
+ if (phy->hard_fault != 0)
+ return;
+
+ if (events & BIT(MEI_BUS_EVENT_RX)) {
+ struct sk_buff *skb;
+ int reply_size;
+
+ skb = alloc_skb(MEI_NFC_MAX_READ, GFP_KERNEL);
+ if (!skb)
+ return;
+
+ reply_size = mei_bus_recv(client, skb->data, MEI_NFC_MAX_READ);
+ if (reply_size < MEI_NFC_HEADER_SIZE) {
+ kfree(skb);
+ return;
+ }
+
+ skb_put(skb, reply_size);
+ skb_pull(skb, MEI_NFC_HEADER_SIZE);
+
+ MEI_DUMP_SKB_IN("mei frame read", skb);
+
+ nfc_hci_recv_frame(phy->hdev, skb);
+ }
+}
+
+static struct nfc_phy_ops mei_phy_ops = {
+ .write = microread_mei_write,
+ .enable = microread_mei_enable,
+ .disable = microread_mei_disable,
+};
+
+static int microread_mei_probe(struct mei_bus_client *client)
+{
+ struct microread_mei_phy *phy;
+ int r;
+
+ pr_info("Probing NFC microread\n");
+
+ phy = kzalloc(sizeof(struct microread_mei_phy), GFP_KERNEL);
+ if (!phy) {
+ pr_err("Cannot allocate memory for microread mei phy.\n");
+ return -ENOMEM;
+ }
+
+ phy->client = client;
+ mei_bus_set_clientdata(client, phy);
+
+ r = mei_bus_register_event_cb(client, microread_event_cb, phy);
+ if (r) {
+ pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n");
+ goto err_out;
+ }
+
+ r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME,
+ MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD,
+ &phy->hdev);
+ if (r < 0)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ kfree(phy);
+
+ return r;
+}
+
+static int microread_mei_remove(struct mei_bus_client *client)
+{
+ struct microread_mei_phy *phy = mei_bus_get_clientdata(client);
+
+ pr_info("Removing microread\n");
+
+ microread_remove(phy->hdev);
+
+ if (phy->powered)
+ microread_mei_disable(phy);
+
+ kfree(phy);
+
+ return 0;
+}
+
+static struct mei_bus_driver microread_driver = {
+ .driver = {
+ .name = MICROREAD_DRIVER_NAME,
+ },
+ .id = {
+ .name = MICROREAD_DRIVER_NAME,
+ .uuid = MICROREAD_UUID,
+ },
+
+ .probe = microread_mei_probe,
+ .remove = microread_mei_remove,
+};
+
+static int microread_mei_init(void)
+{
+ int r;
+
+ pr_debug(DRIVER_DESC ": %s\n", __func__);
+
+ r = mei_driver_register(µread_driver);
+ if (r) {
+ pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n");
+ return r;
+ }
+
+ return 0;
+}
+
+static void microread_mei_exit(void)
+{
+ mei_driver_unregister(µread_driver);
+}
+
+module_init(microread_mei_init);
+module_exit(microread_mei_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c
new file mode 100644
index 0000000..3420d83
--- /dev/null
+++ b/drivers/nfc/microread/microread.c
@@ -0,0 +1,728 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip
+ *
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/crc-ccitt.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "microread.h"
+
+/* Proprietary gates, events, commands and registers */
+/* Admin */
+#define MICROREAD_GATE_ID_ADM NFC_HCI_ADMIN_GATE
+#define MICROREAD_GATE_ID_MGT 0x01
+#define MICROREAD_GATE_ID_OS 0x02
+#define MICROREAD_GATE_ID_TESTRF 0x03
+#define MICROREAD_GATE_ID_LOOPBACK NFC_HCI_LOOPBACK_GATE
+#define MICROREAD_GATE_ID_IDT NFC_HCI_ID_MGMT_GATE
+#define MICROREAD_GATE_ID_LMS NFC_HCI_LINK_MGMT_GATE
+
+/* Reader */
+#define MICROREAD_GATE_ID_MREAD_GEN 0x10
+#define MICROREAD_GATE_ID_MREAD_ISO_B NFC_HCI_RF_READER_B_GATE
+#define MICROREAD_GATE_ID_MREAD_NFC_T1 0x12
+#define MICROREAD_GATE_ID_MREAD_ISO_A NFC_HCI_RF_READER_A_GATE
+#define MICROREAD_GATE_ID_MREAD_NFC_T3 0x14
+#define MICROREAD_GATE_ID_MREAD_ISO_15_3 0x15
+#define MICROREAD_GATE_ID_MREAD_ISO_15_2 0x16
+#define MICROREAD_GATE_ID_MREAD_ISO_B_3 0x17
+#define MICROREAD_GATE_ID_MREAD_BPRIME 0x18
+#define MICROREAD_GATE_ID_MREAD_ISO_A_3 0x19
+
+/* Card */
+#define MICROREAD_GATE_ID_MCARD_GEN 0x20
+#define MICROREAD_GATE_ID_MCARD_ISO_B 0x21
+#define MICROREAD_GATE_ID_MCARD_BPRIME 0x22
+#define MICROREAD_GATE_ID_MCARD_ISO_A 0x23
+#define MICROREAD_GATE_ID_MCARD_NFC_T3 0x24
+#define MICROREAD_GATE_ID_MCARD_ISO_15_3 0x25
+#define MICROREAD_GATE_ID_MCARD_ISO_15_2 0x26
+#define MICROREAD_GATE_ID_MCARD_ISO_B_2 0x27
+#define MICROREAD_GATE_ID_MCARD_ISO_CUSTOM 0x28
+#define MICROREAD_GATE_ID_SECURE_ELEMENT 0x2F
+
+/* P2P */
+#define MICROREAD_GATE_ID_P2P_GEN 0x30
+#define MICROREAD_GATE_ID_P2P_TARGET 0x31
+#define MICROREAD_PAR_P2P_TARGET_MODE 0x01
+#define MICROREAD_PAR_P2P_TARGET_GT 0x04
+#define MICROREAD_GATE_ID_P2P_INITIATOR 0x32
+#define MICROREAD_PAR_P2P_INITIATOR_GI 0x01
+#define MICROREAD_PAR_P2P_INITIATOR_GT 0x03
+
+/* Those pipes are created/opened by default in the chip */
+#define MICROREAD_PIPE_ID_LMS 0x00
+#define MICROREAD_PIPE_ID_ADMIN 0x01
+#define MICROREAD_PIPE_ID_MGT 0x02
+#define MICROREAD_PIPE_ID_OS 0x03
+#define MICROREAD_PIPE_ID_HDS_LOOPBACK 0x04
+#define MICROREAD_PIPE_ID_HDS_IDT 0x05
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B 0x08
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_BPRIME 0x09
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_A 0x0A
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_3 0x0B
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_2 0x0C
+#define MICROREAD_PIPE_ID_HDS_MCARD_NFC_T3 0x0D
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B_2 0x0E
+#define MICROREAD_PIPE_ID_HDS_MCARD_CUSTOM 0x0F
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B 0x10
+#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1 0x11
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A 0x12
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_3 0x13
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_2 0x14
+#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3 0x15
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B_3 0x16
+#define MICROREAD_PIPE_ID_HDS_MREAD_BPRIME 0x17
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3 0x18
+#define MICROREAD_PIPE_ID_HDS_MREAD_GEN 0x1B
+#define MICROREAD_PIPE_ID_HDS_STACKED_ELEMENT 0x1C
+#define MICROREAD_PIPE_ID_HDS_INSTANCES 0x1D
+#define MICROREAD_PIPE_ID_HDS_TESTRF 0x1E
+#define MICROREAD_PIPE_ID_HDS_P2P_TARGET 0x1F
+#define MICROREAD_PIPE_ID_HDS_P2P_INITIATOR 0x20
+
+/* Events */
+#define MICROREAD_EVT_MREAD_DISCOVERY_OCCURED NFC_HCI_EVT_TARGET_DISCOVERED
+#define MICROREAD_EVT_MREAD_CARD_FOUND 0x3D
+#define MICROREAD_EMCF_A_ATQA 0
+#define MICROREAD_EMCF_A_SAK 2
+#define MICROREAD_EMCF_A_LEN 3
+#define MICROREAD_EMCF_A_UID 4
+#define MICROREAD_EMCF_A3_ATQA 0
+#define MICROREAD_EMCF_A3_SAK 2
+#define MICROREAD_EMCF_A3_LEN 3
+#define MICROREAD_EMCF_A3_UID 4
+#define MICROREAD_EMCF_B_UID 0
+#define MICROREAD_EMCF_T1_ATQA 0
+#define MICROREAD_EMCF_T1_UID 4
+#define MICROREAD_EMCF_T3_UID 0
+#define MICROREAD_EVT_MREAD_DISCOVERY_START NFC_HCI_EVT_READER_REQUESTED
+#define MICROREAD_EVT_MREAD_DISCOVERY_START_SOME 0x3E
+#define MICROREAD_EVT_MREAD_DISCOVERY_STOP NFC_HCI_EVT_END_OPERATION
+#define MICROREAD_EVT_MREAD_SIM_REQUESTS 0x3F
+#define MICROREAD_EVT_MCARD_EXCHANGE NFC_HCI_EVT_TARGET_DISCOVERED
+#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF 0x20
+#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF 0x21
+#define MICROREAD_EVT_MCARD_FIELD_ON 0x11
+#define MICROREAD_EVT_P2P_TARGET_ACTIVATED 0x13
+#define MICROREAD_EVT_P2P_TARGET_DEACTIVATED 0x12
+#define MICROREAD_EVT_MCARD_FIELD_OFF 0x14
+
+/* Commands */
+#define MICROREAD_CMD_MREAD_EXCHANGE 0x10
+#define MICROREAD_CMD_MREAD_SUBSCRIBE 0x3F
+
+/* Hosts IDs */
+#define MICROREAD_ELT_ID_HDS NFC_HCI_TERMINAL_HOST_ID
+#define MICROREAD_ELT_ID_SIM NFC_HCI_UICC_HOST_ID
+#define MICROREAD_ELT_ID_SE1 0x03
+#define MICROREAD_ELT_ID_SE2 0x04
+#define MICROREAD_ELT_ID_SE3 0x05
+
+static struct nfc_hci_gate microread_gates[] = {
+ {MICROREAD_GATE_ID_ADM, MICROREAD_PIPE_ID_ADMIN},
+ {MICROREAD_GATE_ID_LOOPBACK, MICROREAD_PIPE_ID_HDS_LOOPBACK},
+ {MICROREAD_GATE_ID_IDT, MICROREAD_PIPE_ID_HDS_IDT},
+ {MICROREAD_GATE_ID_LMS, MICROREAD_PIPE_ID_LMS},
+ {MICROREAD_GATE_ID_MREAD_ISO_B, MICROREAD_PIPE_ID_HDS_MREAD_ISO_B},
+ {MICROREAD_GATE_ID_MREAD_ISO_A, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A},
+ {MICROREAD_GATE_ID_MREAD_ISO_A_3, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3},
+ {MICROREAD_GATE_ID_MGT, MICROREAD_PIPE_ID_MGT},
+ {MICROREAD_GATE_ID_OS, MICROREAD_PIPE_ID_OS},
+ {MICROREAD_GATE_ID_MREAD_NFC_T1, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1},
+ {MICROREAD_GATE_ID_MREAD_NFC_T3, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3},
+ {MICROREAD_GATE_ID_P2P_TARGET, MICROREAD_PIPE_ID_HDS_P2P_TARGET},
+ {MICROREAD_GATE_ID_P2P_INITIATOR, MICROREAD_PIPE_ID_HDS_P2P_INITIATOR}
+};
+
+/* Largest headroom needed for outgoing custom commands */
+#define MICROREAD_CMDS_HEADROOM 2
+#define MICROREAD_CMD_TAILROOM 2
+
+struct microread_info {
+ struct nfc_phy_ops *phy_ops;
+ void *phy_id;
+
+ struct nfc_hci_dev *hdev;
+
+ int async_cb_type;
+ data_exchange_cb_t async_cb;
+ void *async_cb_context;
+};
+
+static int microread_open(struct nfc_hci_dev *hdev)
+{
+ struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+ return info->phy_ops->enable(info->phy_id);
+}
+
+static void microread_close(struct nfc_hci_dev *hdev)
+{
+ struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+ info->phy_ops->disable(info->phy_id);
+}
+
+static int microread_hci_ready(struct nfc_hci_dev *hdev)
+{
+ int r;
+ u8 param[4];
+
+ param[0] = 0x03;
+ r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+ MICROREAD_CMD_MREAD_SUBSCRIBE, param, 1, NULL);
+ if (r)
+ return r;
+
+ r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A_3,
+ MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL);
+ if (r)
+ return r;
+
+ param[0] = 0x00;
+ param[1] = 0x03;
+ param[2] = 0x00;
+ r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_B,
+ MICROREAD_CMD_MREAD_SUBSCRIBE, param, 3, NULL);
+ if (r)
+ return r;
+
+ r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T1,
+ MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL);
+ if (r)
+ return r;
+
+ param[0] = 0xFF;
+ param[1] = 0xFF;
+ param[2] = 0x00;
+ param[3] = 0x00;
+ r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T3,
+ MICROREAD_CMD_MREAD_SUBSCRIBE, param, 4, NULL);
+
+ return r;
+}
+
+static int microread_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+ struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+ return info->phy_ops->write(info->phy_id, skb);
+}
+
+static int microread_start_poll(struct nfc_hci_dev *hdev,
+ u32 im_protocols, u32 tm_protocols)
+{
+ int r;
+
+ u8 param[2];
+ u8 mode;
+
+ param[0] = 0x00;
+ param[1] = 0x00;
+
+ if (im_protocols & NFC_PROTO_ISO14443_MASK)
+ param[0] |= (1 << 2);
+
+ if (im_protocols & NFC_PROTO_ISO14443_B_MASK)
+ param[0] |= 1;
+
+ if (im_protocols & NFC_PROTO_MIFARE_MASK)
+ param[1] |= 1;
+
+ if (im_protocols & NFC_PROTO_JEWEL_MASK)
+ param[0] |= (1 << 1);
+
+ if (im_protocols & NFC_PROTO_FELICA_MASK)
+ param[0] |= (1 << 5);
+
+ if (im_protocols & NFC_PROTO_NFC_DEP_MASK)
+ param[1] |= (1 << 1);
+
+ if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) {
+ hdev->gb = nfc_get_local_general_bytes(hdev->ndev,
+ &hdev->gb_len);
+ if (hdev->gb == NULL || hdev->gb_len == 0) {
+ im_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+ tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+ }
+ }
+
+ r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+ MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0);
+ if (r)
+ return r;
+
+ mode = 0xff;
+ r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+ MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+ if (r)
+ return r;
+
+ if (im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+ r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_INITIATOR,
+ MICROREAD_PAR_P2P_INITIATOR_GI,
+ hdev->gb, hdev->gb_len);
+ if (r)
+ return r;
+ }
+
+ if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
+ r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+ MICROREAD_PAR_P2P_TARGET_GT,
+ hdev->gb, hdev->gb_len);
+ if (r)
+ return r;
+
+ mode = 0x02;
+ r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+ MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+ if (r)
+ return r;
+ }
+
+ return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+ MICROREAD_EVT_MREAD_DISCOVERY_START_SOME,
+ param, 2);
+}
+
+static int microread_dep_link_up(struct nfc_hci_dev *hdev,
+ struct nfc_target *target, u8 comm_mode,
+ u8 *gb, size_t gb_len)
+{
+ struct sk_buff *rgb_skb = NULL;
+ int r;
+
+ r = nfc_hci_get_param(hdev, target->hci_reader_gate,
+ MICROREAD_PAR_P2P_INITIATOR_GT, &rgb_skb);
+ if (r < 0)
+ return r;
+
+ if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) {
+ r = -EPROTO;
+ goto exit;
+ }
+
+ r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data,
+ rgb_skb->len);
+ if (r == 0)
+ r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode,
+ NFC_RF_INITIATOR);
+exit:
+ kfree_skb(rgb_skb);
+
+ return r;
+}
+
+static int microread_dep_link_down(struct nfc_hci_dev *hdev)
+{
+ return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_INITIATOR,
+ MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0);
+}
+
+static int microread_target_from_gate(struct nfc_hci_dev *hdev, u8 gate,
+ struct nfc_target *target)
+{
+ switch (gate) {
+ case MICROREAD_GATE_ID_P2P_INITIATOR:
+ target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+ break;
+ default:
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+static int microread_complete_target_discovered(struct nfc_hci_dev *hdev,
+ u8 gate,
+ struct nfc_target *target)
+{
+ return 0;
+}
+
+#define MICROREAD_CB_TYPE_READER_ALL 1
+
+static void microread_im_transceive_cb(void *context, struct sk_buff *skb,
+ int err)
+{
+ struct microread_info *info = context;
+
+ switch (info->async_cb_type) {
+ case MICROREAD_CB_TYPE_READER_ALL:
+ if (err == 0) {
+ if (skb->len == 0) {
+ err = -EPROTO;
+ kfree_skb(skb);
+ info->async_cb(info->async_cb_context, NULL,
+ -EPROTO);
+ return;
+ }
+
+ if (skb->data[skb->len - 1] != 0) {
+ err = nfc_hci_result_to_errno(
+ skb->data[skb->len - 1]);
+ kfree_skb(skb);
+ info->async_cb(info->async_cb_context, NULL,
+ err);
+ return;
+ }
+
+ skb_trim(skb, skb->len - 1); /* RF Error ind. */
+ }
+ info->async_cb(info->async_cb_context, skb, err);
+ break;
+ default:
+ if (err == 0)
+ kfree_skb(skb);
+ break;
+ }
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ * 1: driver doesn't especially handle, please do standard processing
+ */
+static int microread_im_transceive(struct nfc_hci_dev *hdev,
+ struct nfc_target *target,
+ struct sk_buff *skb, data_exchange_cb_t cb,
+ void *cb_context)
+{
+ struct microread_info *info = nfc_hci_get_clientdata(hdev);
+ u8 control_bits;
+ u16 crc;
+
+ pr_info("data exchange to gate 0x%x\n", target->hci_reader_gate);
+
+ if (target->hci_reader_gate == MICROREAD_GATE_ID_P2P_INITIATOR) {
+ *skb_push(skb, 1) = 0;
+
+ return nfc_hci_send_event(hdev, target->hci_reader_gate,
+ MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF,
+ skb->data, skb->len);
+ }
+
+ switch (target->hci_reader_gate) {
+ case MICROREAD_GATE_ID_MREAD_ISO_A:
+ control_bits = 0xCB;
+ break;
+ case MICROREAD_GATE_ID_MREAD_ISO_A_3:
+ control_bits = 0xCB;
+ break;
+ case MICROREAD_GATE_ID_MREAD_ISO_B:
+ control_bits = 0xCB;
+ break;
+ case MICROREAD_GATE_ID_MREAD_NFC_T1:
+ control_bits = 0x1B;
+
+ crc = crc_ccitt(0xffff, skb->data, skb->len);
+ crc = ~crc;
+ *skb_put(skb, 1) = crc & 0xff;
+ *skb_put(skb, 1) = crc >> 8;
+ break;
+ case MICROREAD_GATE_ID_MREAD_NFC_T3:
+ control_bits = 0xDB;
+ break;
+ default:
+ pr_info("Abort im_transceive to invalid gate 0x%x\n",
+ target->hci_reader_gate);
+ return 1;
+ }
+
+ *skb_push(skb, 1) = control_bits;
+
+ info->async_cb_type = MICROREAD_CB_TYPE_READER_ALL;
+ info->async_cb = cb;
+ info->async_cb_context = cb_context;
+
+ return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+ MICROREAD_CMD_MREAD_EXCHANGE,
+ skb->data, skb->len,
+ microread_im_transceive_cb, info);
+}
+
+static int microread_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+ int r;
+
+ r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+ MICROREAD_EVT_MCARD_EXCHANGE,
+ skb->data, skb->len);
+
+ kfree_skb(skb);
+
+ return r;
+}
+
+static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
+ struct sk_buff *skb)
+{
+ struct nfc_target *targets;
+ int r = 0;
+
+ pr_info("target discovered to gate 0x%x\n", gate);
+
+ targets = kzalloc(sizeof(struct nfc_target), GFP_KERNEL);
+ if (targets == NULL) {
+ r = -ENOMEM;
+ goto exit;
+ }
+
+ targets->hci_reader_gate = gate;
+
+ switch (gate) {
+ case MICROREAD_GATE_ID_MREAD_ISO_A:
+ targets->supported_protocols =
+ nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A_SAK]);
+ targets->sens_res =
+ be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
+ targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
+ skb->data[MICROREAD_EMCF_A_LEN]);
+ targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
+ break;
+ case MICROREAD_GATE_ID_MREAD_ISO_A_3:
+ targets->supported_protocols =
+ nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]);
+ targets->sens_res =
+ be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
+ targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
+ skb->data[MICROREAD_EMCF_A3_LEN]);
+ targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
+ break;
+ case MICROREAD_GATE_ID_MREAD_ISO_B:
+ targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_B_UID], 4);
+ targets->nfcid1_len = 4;
+ break;
+ case MICROREAD_GATE_ID_MREAD_NFC_T1:
+ targets->supported_protocols = NFC_PROTO_JEWEL_MASK;
+ targets->sens_res =
+ le16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_T1_ATQA]);
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T1_UID], 4);
+ targets->nfcid1_len = 4;
+ break;
+ case MICROREAD_GATE_ID_MREAD_NFC_T3:
+ targets->supported_protocols = NFC_PROTO_FELICA_MASK;
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T3_UID], 8);
+ targets->nfcid1_len = 8;
+ break;
+ default:
+ pr_info("discard target discovered to gate 0x%x\n", gate);
+ goto exit_free;
+ }
+
+ r = nfc_targets_found(hdev->ndev, targets, 1);
+
+exit_free:
+ kfree(targets);
+
+exit:
+ kfree_skb(skb);
+
+ if (r)
+ pr_err("Failed to handle discovered target err=%d", r);
+}
+
+static int microread_event_received(struct nfc_hci_dev *hdev, u8 gate,
+ u8 event, struct sk_buff *skb)
+{
+ int r;
+ u8 mode;
+
+ pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate);
+
+ switch (event) {
+ case MICROREAD_EVT_MREAD_CARD_FOUND:
+ microread_target_discovered(hdev, gate, skb);
+ return 0;
+
+ case MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF:
+ if (skb->len < 1) {
+ kfree_skb(skb);
+ return -EPROTO;
+ }
+
+ if (skb->data[skb->len - 1]) {
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ skb_trim(skb, skb->len - 1);
+
+ r = nfc_tm_data_received(hdev->ndev, skb);
+ break;
+
+ case MICROREAD_EVT_MCARD_FIELD_ON:
+ case MICROREAD_EVT_MCARD_FIELD_OFF:
+ kfree_skb(skb);
+ return 0;
+
+ case MICROREAD_EVT_P2P_TARGET_ACTIVATED:
+ r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK,
+ NFC_COMM_PASSIVE, skb->data,
+ skb->len);
+
+ kfree_skb(skb);
+ break;
+
+ case MICROREAD_EVT_MCARD_EXCHANGE:
+ if (skb->len < 1) {
+ kfree_skb(skb);
+ return -EPROTO;
+ }
+
+ if (skb->data[skb->len-1]) {
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ skb_trim(skb, skb->len - 1);
+
+ r = nfc_tm_data_received(hdev->ndev, skb);
+ break;
+
+ case MICROREAD_EVT_P2P_TARGET_DEACTIVATED:
+ kfree_skb(skb);
+
+ mode = 0xff;
+ r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+ MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+ if (r)
+ break;
+
+ r = nfc_hci_send_event(hdev, gate,
+ MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL,
+ 0);
+ break;
+
+ default:
+ return 1;
+ }
+
+ return r;
+}
+
+static struct nfc_hci_ops microread_hci_ops = {
+ .open = microread_open,
+ .close = microread_close,
+ .hci_ready = microread_hci_ready,
+ .xmit = microread_xmit,
+ .start_poll = microread_start_poll,
+ .dep_link_up = microread_dep_link_up,
+ .dep_link_down = microread_dep_link_down,
+ .target_from_gate = microread_target_from_gate,
+ .complete_target_discovered = microread_complete_target_discovered,
+ .im_transceive = microread_im_transceive,
+ .tm_send = microread_tm_send,
+ .check_presence = NULL,
+ .event_received = microread_event_received,
+};
+
+int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+ int phy_headroom, int phy_tailroom, int phy_payload,
+ struct nfc_hci_dev **hdev)
+{
+ struct microread_info *info;
+ unsigned long quirks = 0;
+ u32 protocols, se;
+ struct nfc_hci_init_data init_data;
+ int r;
+
+ info = kzalloc(sizeof(struct microread_info), GFP_KERNEL);
+ if (!info) {
+ pr_err("Cannot allocate memory for microread_info.\n");
+ r = -ENOMEM;
+ goto err_info_alloc;
+ }
+
+ info->phy_ops = phy_ops;
+ info->phy_id = phy_id;
+
+ init_data.gate_count = ARRAY_SIZE(microread_gates);
+ memcpy(init_data.gates, microread_gates, sizeof(microread_gates));
+
+ strcpy(init_data.session_id, "MICROREA");
+
+ set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks);
+
+ protocols = NFC_PROTO_JEWEL_MASK |
+ NFC_PROTO_MIFARE_MASK |
+ NFC_PROTO_FELICA_MASK |
+ NFC_PROTO_ISO14443_MASK |
+ NFC_PROTO_ISO14443_B_MASK |
+ NFC_PROTO_NFC_DEP_MASK;
+
+ se = NFC_SE_UICC | NFC_SE_EMBEDDED;
+
+ info->hdev = nfc_hci_allocate_device(µread_hci_ops, &init_data,
+ quirks, protocols, se, llc_name,
+ phy_headroom +
+ MICROREAD_CMDS_HEADROOM,
+ phy_tailroom +
+ MICROREAD_CMD_TAILROOM,
+ phy_payload);
+ if (!info->hdev) {
+ pr_err("Cannot allocate nfc hdev.\n");
+ r = -ENOMEM;
+ goto err_alloc_hdev;
+ }
+
+ nfc_hci_set_clientdata(info->hdev, info);
+
+ r = nfc_hci_register_device(info->hdev);
+ if (r)
+ goto err_regdev;
+
+ *hdev = info->hdev;
+
+ return 0;
+
+err_regdev:
+ nfc_hci_free_device(info->hdev);
+
+err_alloc_hdev:
+ kfree(info);
+
+err_info_alloc:
+ return r;
+}
+EXPORT_SYMBOL(microread_probe);
+
+void microread_remove(struct nfc_hci_dev *hdev)
+{
+ struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+ nfc_hci_unregister_device(hdev);
+ nfc_hci_free_device(hdev);
+ kfree(info);
+}
+EXPORT_SYMBOL(microread_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/microread.h b/drivers/nfc/microread/microread.h
new file mode 100644
index 0000000..64b447a
--- /dev/null
+++ b/drivers/nfc/microread/microread.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __LOCAL_MICROREAD_H_
+#define __LOCAL_MICROREAD_H_
+
+#include <net/nfc/hci.h>
+
+#define DRIVER_DESC "NFC driver for microread"
+
+int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+ int phy_headroom, int phy_tailroom, int phy_payload,
+ struct nfc_hci_dev **hdev);
+
+void microread_remove(struct nfc_hci_dev *hdev);
+
+#endif /* __LOCAL_MICROREAD_H_ */
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index f696318..f0f6763 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -219,7 +219,7 @@
u8 len;
};
-const struct pn533_poll_modulations poll_mod[] = {
+static const struct pn533_poll_modulations poll_mod[] = {
[PN533_POLL_MOD_106KBPS_A] = {
.data = {
.maxtg = 1,
@@ -485,7 +485,7 @@
return PN533_FRAME_CMD(f);
}
-struct pn533_frame_ops pn533_std_frame_ops = {
+static struct pn533_frame_ops pn533_std_frame_ops = {
.tx_frame_init = pn533_tx_frame_init,
.tx_frame_finish = pn533_tx_frame_finish,
.tx_update_payload_len = pn533_tx_update_payload_len,
@@ -532,7 +532,6 @@
urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
- break;
case -ESHUTDOWN:
default:
nfc_dev_err(&dev->interface->dev,
@@ -589,7 +588,6 @@
urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
- break;
case -ESHUTDOWN:
default:
nfc_dev_err(&dev->interface->dev,
@@ -1380,7 +1378,7 @@
return NULL;
/* DEP support only */
- *skb_put(skb, 1) |= PN533_INIT_TARGET_DEP;
+ *skb_put(skb, 1) = PN533_INIT_TARGET_DEP;
/* MIFARE params */
memcpy(skb_put(skb, 6), mifare_params, 6);
diff --git a/include/linux/platform_data/microread.h b/include/linux/platform_data/microread.h
new file mode 100644
index 0000000..cfda59b
--- /dev/null
+++ b/include/linux/platform_data/microread.h
@@ -0,0 +1,35 @@
+/*
+ * Driver include for the PN544 NFC chip.
+ *
+ * Copyright (C) 2011 Tieto Poland
+ * Copyright (C) 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _MICROREAD_H
+#define _MICROREAD_H
+
+#include <linux/i2c.h>
+
+#define MICROREAD_DRIVER_NAME "microread"
+
+/* board config platform data for microread */
+struct microread_nfc_platform_data {
+ unsigned int rst_gpio;
+ unsigned int irq_gpio;
+ unsigned int ioh_gpio;
+};
+
+#endif /* _MICROREAD_H */