V4L/DVB (4806): Saa7134: add support for Hauppauge WinTV-HVR1110 DVB-T/Hybrid
This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid
Signed-off-by: Thomas Genty <tomlohave@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 92ce6e2..ef67ace 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -102,3 +102,4 @@
101 -> Pinnacle PCTV 310i [11bd:002f]
102 -> Avermedia AVerTV Studio 507 [1461:9715]
103 -> Compro Videomate DVB-T200A
+104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid [0070:6701]
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index f5ad450..d8d8142 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3126,6 +3126,28 @@
.amux = LINE2,
}},
},
+ [SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
+ /* Thomas Genty <tomlohave@gmail.com> */
+ .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 0x000200000,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3753,6 +3775,12 @@
.subdevice = 0x4876,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
},{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x0070,
+ .subdevice = 0x6701,
+ .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110,
+ },{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -4053,6 +4081,7 @@
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 098d8a6..a51264f 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -900,6 +900,18 @@
/* ------------------------------------------------------------------ */
+static struct tda1004x_config hauppauge_hvr_1110_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .if_freq = TDA10046_FREQ_045,
+ .request_firmware = philips_tda1004x_request_firmware,
+};
+
+/* ------------------------------------------------------------------ */
+
static struct tda1004x_config asus_p7131_dual_config = {
.demod_address = 0x08,
.invert = 1,
@@ -1221,6 +1233,17 @@
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
}
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+ dev->dvb.frontend = dvb_attach(tda10046_attach,
+ &hauppauge_hvr_1110_config,
+ &dev->i2c_adap);
+ if (dev->dvb.frontend) {
+ dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
+ dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
+ dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+ }
+ break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&asus_p7131_dual_config,
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 0c0f465..fee7512 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -230,6 +230,7 @@
#define SAA7134_BOARD_PINNACLE_PCTV_310i 101
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102
#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103
+#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8