cfg80211: use compare_ether_addr on MAC addresses instead of memcmp
Because of the constant size and guaranteed 16 bit alignment, the inline
compare_ether_addr function is much cheaper than calling memcmp.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index f5a7ac3..e14fdcc 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -6,6 +6,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <linux/nl80211.h>
#include <linux/slab.h>
@@ -100,7 +101,7 @@
ASSERT_WDEV_LOCK(wdev);
if (wdev->current_bss &&
- memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
+ compare_ether_addr(wdev->current_bss->pub.bssid, bssid) == 0) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(&wdev->current_bss->pub);
wdev->current_bss = NULL;
@@ -115,7 +116,7 @@
reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
- from_ap = memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0;
+ from_ap = compare_ether_addr(mgmt->sa, dev->dev_addr) != 0;
__cfg80211_disconnected(dev, NULL, 0, reason_code, from_ap);
} else if (wdev->sme_state == CFG80211_SME_CONNECTING) {
__cfg80211_connect_result(dev, mgmt->bssid, NULL, 0, NULL, 0,
@@ -154,7 +155,7 @@
return;
if (wdev->current_bss &&
- memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
+ compare_ether_addr(wdev->current_bss->pub.bssid, bssid) == 0) {
cfg80211_sme_disassoc(dev, wdev->current_bss);
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(&wdev->current_bss->pub);
@@ -165,7 +166,7 @@
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
- from_ap = memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0;
+ from_ap = compare_ether_addr(mgmt->sa, dev->dev_addr) != 0;
__cfg80211_disconnected(dev, NULL, 0, reason_code, from_ap);
}
EXPORT_SYMBOL(__cfg80211_send_disassoc);
@@ -285,7 +286,7 @@
return -EINVAL;
if (wdev->current_bss &&
- memcmp(bssid, wdev->current_bss->pub.bssid, ETH_ALEN) == 0)
+ compare_ether_addr(bssid, wdev->current_bss->pub.bssid) == 0)
return -EALREADY;
memset(&req, 0, sizeof(req));
@@ -362,7 +363,7 @@
memset(&req, 0, sizeof(req));
if (wdev->current_bss && prev_bssid &&
- memcmp(wdev->current_bss->pub.bssid, prev_bssid, ETH_ALEN) == 0) {
+ compare_ether_addr(wdev->current_bss->pub.bssid, prev_bssid) == 0) {
/*
* Trying to reassociate: Allow this to proceed and let the old
* association to be dropped when the new one is completed.
@@ -446,7 +447,8 @@
if (local_state_change) {
if (wdev->current_bss &&
- memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
+ compare_ether_addr(wdev->current_bss->pub.bssid, bssid)
+ == 0) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(&wdev->current_bss->pub);
wdev->current_bss = NULL;
@@ -495,7 +497,7 @@
req.local_state_change = local_state_change;
req.ie = ie;
req.ie_len = ie_len;
- if (memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0)
+ if (compare_ether_addr(wdev->current_bss->pub.bssid, bssid) == 0)
req.bss = &wdev->current_bss->pub;
else
return -ENOTCONN;
@@ -758,8 +760,8 @@
break;
}
- if (memcmp(wdev->current_bss->pub.bssid,
- mgmt->bssid, ETH_ALEN)) {
+ if (compare_ether_addr(wdev->current_bss->pub.bssid,
+ mgmt->bssid)) {
err = -ENOTCONN;
break;
}
@@ -772,8 +774,8 @@
break;
/* for station, check that DA is the AP */
- if (memcmp(wdev->current_bss->pub.bssid,
- mgmt->da, ETH_ALEN)) {
+ if (compare_ether_addr(wdev->current_bss->pub.bssid,
+ mgmt->da)) {
err = -ENOTCONN;
break;
}
@@ -781,11 +783,11 @@
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
case NL80211_IFTYPE_AP_VLAN:
- if (memcmp(mgmt->bssid, dev->dev_addr, ETH_ALEN))
+ if (compare_ether_addr(mgmt->bssid, dev->dev_addr))
err = -EINVAL;
break;
case NL80211_IFTYPE_MESH_POINT:
- if (memcmp(mgmt->sa, mgmt->bssid, ETH_ALEN)) {
+ if (compare_ether_addr(mgmt->sa, mgmt->bssid)) {
err = -EINVAL;
break;
}
@@ -804,7 +806,7 @@
return err;
}
- if (memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0)
+ if (compare_ether_addr(mgmt->sa, dev->dev_addr) != 0)
return -EINVAL;
/* Transmit the Action frame as requested by user space */