| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009-2010 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/crc7.h> |
| #include <linux/vmalloc.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/gpio.h> |
| #include <linux/wl12xx.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "wl12xx.h" |
| #include "wl12xx_80211.h" |
| #include "io.h" |
| |
| #ifndef SDIO_VENDOR_ID_TI |
| #define SDIO_VENDOR_ID_TI 0x0097 |
| #endif |
| |
| #ifndef SDIO_DEVICE_ID_TI_WL1271 |
| #define SDIO_DEVICE_ID_TI_WL1271 0x4076 |
| #endif |
| |
| static const struct sdio_device_id wl1271_devices[] = { |
| { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(sdio, wl1271_devices); |
| |
| static inline struct sdio_func *wl_to_func(struct wl1271 *wl) |
| { |
| return wl->if_priv; |
| } |
| |
| static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl) |
| { |
| return &(wl_to_func(wl)->dev); |
| } |
| |
| static irqreturn_t wl1271_hardirq(int irq, void *cookie) |
| { |
| struct wl1271 *wl = cookie; |
| unsigned long flags; |
| |
| wl1271_debug(DEBUG_IRQ, "IRQ"); |
| |
| /* complete the ELP completion */ |
| spin_lock_irqsave(&wl->wl_lock, flags); |
| set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags); |
| if (wl->elp_compl) { |
| complete(wl->elp_compl); |
| wl->elp_compl = NULL; |
| } |
| spin_unlock_irqrestore(&wl->wl_lock, flags); |
| |
| return IRQ_WAKE_THREAD; |
| } |
| |
| static void wl1271_sdio_disable_interrupts(struct wl1271 *wl) |
| { |
| disable_irq(wl->irq); |
| } |
| |
| static void wl1271_sdio_enable_interrupts(struct wl1271 *wl) |
| { |
| enable_irq(wl->irq); |
| } |
| |
| static void wl1271_sdio_reset(struct wl1271 *wl) |
| { |
| } |
| |
| static void wl1271_sdio_init(struct wl1271 *wl) |
| { |
| } |
| |
| static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf, |
| size_t len, bool fixed) |
| { |
| int ret; |
| struct sdio_func *func = wl_to_func(wl); |
| |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { |
| ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); |
| wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x", |
| addr, ((u8 *)buf)[0]); |
| } else { |
| if (fixed) |
| ret = sdio_readsb(func, buf, addr, len); |
| else |
| ret = sdio_memcpy_fromio(func, buf, addr, len); |
| |
| wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes", |
| addr, len); |
| wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); |
| } |
| |
| if (ret) |
| wl1271_error("sdio read failed (%d)", ret); |
| } |
| |
| static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf, |
| size_t len, bool fixed) |
| { |
| int ret; |
| struct sdio_func *func = wl_to_func(wl); |
| |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { |
| sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); |
| wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x", |
| addr, ((u8 *)buf)[0]); |
| } else { |
| wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes", |
| addr, len); |
| wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len); |
| |
| if (fixed) |
| ret = sdio_writesb(func, addr, buf, len); |
| else |
| ret = sdio_memcpy_toio(func, addr, buf, len); |
| } |
| |
| if (ret) |
| wl1271_error("sdio write failed (%d)", ret); |
| } |
| |
| static int wl1271_sdio_power_on(struct wl1271 *wl) |
| { |
| struct sdio_func *func = wl_to_func(wl); |
| int ret; |
| |
| /* Make sure the card will not be powered off by runtime PM */ |
| ret = pm_runtime_get_sync(&func->dev); |
| if (ret < 0) |
| goto out; |
| |
| /* Runtime PM might be disabled, so power up the card manually */ |
| ret = mmc_power_restore_host(func->card->host); |
| if (ret < 0) |
| goto out; |
| |
| sdio_claim_host(func); |
| sdio_enable_func(func); |
| |
| out: |
| return ret; |
| } |
| |
| static int wl1271_sdio_power_off(struct wl1271 *wl) |
| { |
| struct sdio_func *func = wl_to_func(wl); |
| int ret; |
| |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| |
| /* Runtime PM might be disabled, so power off the card manually */ |
| ret = mmc_power_save_host(func->card->host); |
| if (ret < 0) |
| return ret; |
| |
| /* Let runtime PM know the card is powered off */ |
| return pm_runtime_put_sync(&func->dev); |
| } |
| |
| static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable) |
| { |
| if (enable) |
| return wl1271_sdio_power_on(wl); |
| else |
| return wl1271_sdio_power_off(wl); |
| } |
| |
| static struct wl1271_if_operations sdio_ops = { |
| .read = wl1271_sdio_raw_read, |
| .write = wl1271_sdio_raw_write, |
| .reset = wl1271_sdio_reset, |
| .init = wl1271_sdio_init, |
| .power = wl1271_sdio_set_power, |
| .dev = wl1271_sdio_wl_to_dev, |
| .enable_irq = wl1271_sdio_enable_interrupts, |
| .disable_irq = wl1271_sdio_disable_interrupts |
| }; |
| |
| static int __devinit wl1271_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct ieee80211_hw *hw; |
| const struct wl12xx_platform_data *wlan_data; |
| struct wl1271 *wl; |
| int ret; |
| |
| /* We are only able to handle the wlan function */ |
| if (func->num != 0x02) |
| return -ENODEV; |
| |
| hw = wl1271_alloc_hw(); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| |
| wl = hw->priv; |
| |
| wl->if_priv = func; |
| wl->if_ops = &sdio_ops; |
| |
| /* Grab access to FN0 for ELP reg. */ |
| func->card->quirks |= MMC_QUIRK_LENIENT_FN0; |
| |
| wlan_data = wl12xx_get_platform_data(); |
| if (IS_ERR(wlan_data)) { |
| ret = PTR_ERR(wlan_data); |
| wl1271_error("missing wlan platform data: %d", ret); |
| goto out_free; |
| } |
| |
| wl->irq = wlan_data->irq; |
| wl->ref_clock = wlan_data->board_ref_clock; |
| |
| ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq, |
| IRQF_TRIGGER_HIGH | IRQF_ONESHOT, |
| DRIVER_NAME, wl); |
| if (ret < 0) { |
| wl1271_error("request_irq() failed: %d", ret); |
| goto out_free; |
| } |
| |
| disable_irq(wl->irq); |
| |
| ret = wl1271_init_ieee80211(wl); |
| if (ret) |
| goto out_irq; |
| |
| ret = wl1271_register_hw(wl); |
| if (ret) |
| goto out_irq; |
| |
| sdio_set_drvdata(func, wl); |
| |
| /* Tell PM core that we don't need the card to be powered now */ |
| pm_runtime_put_noidle(&func->dev); |
| |
| wl1271_notice("initialized"); |
| |
| return 0; |
| |
| out_irq: |
| free_irq(wl->irq, wl); |
| |
| out_free: |
| wl1271_free_hw(wl); |
| |
| return ret; |
| } |
| |
| static void __devexit wl1271_remove(struct sdio_func *func) |
| { |
| struct wl1271 *wl = sdio_get_drvdata(func); |
| |
| /* Undo decrement done above in wl1271_probe */ |
| pm_runtime_get_noresume(&func->dev); |
| |
| wl1271_unregister_hw(wl); |
| free_irq(wl->irq, wl); |
| wl1271_free_hw(wl); |
| } |
| |
| static int wl1271_suspend(struct device *dev) |
| { |
| /* Tell MMC/SDIO core it's OK to power down the card |
| * (if it isn't already), but not to remove it completely */ |
| return 0; |
| } |
| |
| static int wl1271_resume(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static const struct dev_pm_ops wl1271_sdio_pm_ops = { |
| .suspend = wl1271_suspend, |
| .resume = wl1271_resume, |
| }; |
| |
| static struct sdio_driver wl1271_sdio_driver = { |
| .name = "wl1271_sdio", |
| .id_table = wl1271_devices, |
| .probe = wl1271_probe, |
| .remove = __devexit_p(wl1271_remove), |
| .drv = { |
| .pm = &wl1271_sdio_pm_ops, |
| }, |
| }; |
| |
| static int __init wl1271_init(void) |
| { |
| int ret; |
| |
| ret = sdio_register_driver(&wl1271_sdio_driver); |
| if (ret < 0) { |
| wl1271_error("failed to register sdio driver: %d", ret); |
| goto out; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static void __exit wl1271_exit(void) |
| { |
| sdio_unregister_driver(&wl1271_sdio_driver); |
| |
| wl1271_notice("unloaded"); |
| } |
| |
| module_init(wl1271_init); |
| module_exit(wl1271_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); |
| MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |
| MODULE_FIRMWARE(WL1271_FW_NAME); |
| MODULE_FIRMWARE(WL1271_AP_FW_NAME); |