| /* |
| * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit) |
| * |
| * Copyright (C) 2014 Samsung Electronics |
| * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> |
| * Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| * Donggeun Kim <dg77.kim@samsung.com> |
| * Amit Daniel Kachhap <amit.kachhap@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "exynos_tmu.h" |
| #include "../thermal_core.h" |
| |
| /* Exynos generic registers */ |
| #define EXYNOS_TMU_REG_TRIMINFO 0x0 |
| #define EXYNOS_TMU_REG_CONTROL 0x20 |
| #define EXYNOS_TMU_REG_STATUS 0x28 |
| #define EXYNOS_TMU_REG_CURRENT_TEMP 0x40 |
| #define EXYNOS_TMU_REG_INTEN 0x70 |
| #define EXYNOS_TMU_REG_INTSTAT 0x74 |
| #define EXYNOS_TMU_REG_INTCLEAR 0x78 |
| |
| #define EXYNOS_TMU_TEMP_MASK 0xff |
| #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24 |
| #define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f |
| #define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf |
| #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 |
| #define EXYNOS_TMU_CORE_EN_SHIFT 0 |
| |
| /* Exynos3250 specific registers */ |
| #define EXYNOS_TMU_TRIMINFO_CON1 0x10 |
| |
| /* Exynos4210 specific registers */ |
| #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 |
| #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 |
| |
| /* Exynos5250, Exynos4412, Exynos3250 specific registers */ |
| #define EXYNOS_TMU_TRIMINFO_CON2 0x14 |
| #define EXYNOS_THD_TEMP_RISE 0x50 |
| #define EXYNOS_THD_TEMP_FALL 0x54 |
| #define EXYNOS_EMUL_CON 0x80 |
| |
| #define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 |
| #define EXYNOS_TRIMINFO_25_SHIFT 0 |
| #define EXYNOS_TRIMINFO_85_SHIFT 8 |
| #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 |
| #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 |
| #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 |
| |
| #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 |
| #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 |
| #define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 |
| #define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 |
| #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 |
| |
| #define EXYNOS_EMUL_TIME 0x57F0 |
| #define EXYNOS_EMUL_TIME_MASK 0xffff |
| #define EXYNOS_EMUL_TIME_SHIFT 16 |
| #define EXYNOS_EMUL_DATA_SHIFT 8 |
| #define EXYNOS_EMUL_DATA_MASK 0xFF |
| #define EXYNOS_EMUL_ENABLE 0x1 |
| |
| /* Exynos5260 specific */ |
| #define EXYNOS5260_TMU_REG_INTEN 0xC0 |
| #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 |
| #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 |
| #define EXYNOS5260_EMUL_CON 0x100 |
| |
| /* Exynos4412 specific */ |
| #define EXYNOS4412_MUX_ADDR_VALUE 6 |
| #define EXYNOS4412_MUX_ADDR_SHIFT 20 |
| |
| /* Exynos5433 specific registers */ |
| #define EXYNOS5433_TMU_REG_CONTROL1 0x024 |
| #define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c |
| #define EXYNOS5433_TMU_COUNTER_VALUE0 0x030 |
| #define EXYNOS5433_TMU_COUNTER_VALUE1 0x034 |
| #define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044 |
| #define EXYNOS5433_THD_TEMP_RISE3_0 0x050 |
| #define EXYNOS5433_THD_TEMP_RISE7_4 0x054 |
| #define EXYNOS5433_THD_TEMP_FALL3_0 0x060 |
| #define EXYNOS5433_THD_TEMP_FALL7_4 0x064 |
| #define EXYNOS5433_TMU_REG_INTEN 0x0c0 |
| #define EXYNOS5433_TMU_REG_INTPEND 0x0c8 |
| #define EXYNOS5433_TMU_EMUL_CON 0x110 |
| #define EXYNOS5433_TMU_PD_DET_EN 0x130 |
| |
| #define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16 |
| #define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23 |
| #define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \ |
| (0xf << EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT) |
| #define EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23) |
| |
| #define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0 |
| #define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1 |
| |
| #define EXYNOS5433_PD_DET_EN 1 |
| |
| /*exynos5440 specific registers*/ |
| #define EXYNOS5440_TMU_S0_7_TRIM 0x000 |
| #define EXYNOS5440_TMU_S0_7_CTRL 0x020 |
| #define EXYNOS5440_TMU_S0_7_DEBUG 0x040 |
| #define EXYNOS5440_TMU_S0_7_TEMP 0x0f0 |
| #define EXYNOS5440_TMU_S0_7_TH0 0x110 |
| #define EXYNOS5440_TMU_S0_7_TH1 0x130 |
| #define EXYNOS5440_TMU_S0_7_TH2 0x150 |
| #define EXYNOS5440_TMU_S0_7_IRQEN 0x210 |
| #define EXYNOS5440_TMU_S0_7_IRQ 0x230 |
| /* exynos5440 common registers */ |
| #define EXYNOS5440_TMU_IRQ_STATUS 0x000 |
| #define EXYNOS5440_TMU_PMIN 0x004 |
| |
| #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 |
| #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 |
| #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 |
| #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 |
| #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 |
| #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 |
| #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 |
| |
| /* Exynos7 specific registers */ |
| #define EXYNOS7_THD_TEMP_RISE7_6 0x50 |
| #define EXYNOS7_THD_TEMP_FALL7_6 0x60 |
| #define EXYNOS7_TMU_REG_INTEN 0x110 |
| #define EXYNOS7_TMU_REG_INTPEND 0x118 |
| #define EXYNOS7_TMU_REG_EMUL_CON 0x160 |
| |
| #define EXYNOS7_TMU_TEMP_MASK 0x1ff |
| #define EXYNOS7_PD_DET_EN_SHIFT 23 |
| #define EXYNOS7_TMU_INTEN_RISE0_SHIFT 0 |
| #define EXYNOS7_TMU_INTEN_RISE1_SHIFT 1 |
| #define EXYNOS7_TMU_INTEN_RISE2_SHIFT 2 |
| #define EXYNOS7_TMU_INTEN_RISE3_SHIFT 3 |
| #define EXYNOS7_TMU_INTEN_RISE4_SHIFT 4 |
| #define EXYNOS7_TMU_INTEN_RISE5_SHIFT 5 |
| #define EXYNOS7_TMU_INTEN_RISE6_SHIFT 6 |
| #define EXYNOS7_TMU_INTEN_RISE7_SHIFT 7 |
| #define EXYNOS7_EMUL_DATA_SHIFT 7 |
| #define EXYNOS7_EMUL_DATA_MASK 0x1ff |
| |
| #define MCELSIUS 1000 |
| /** |
| * struct exynos_tmu_data : A structure to hold the private data of the TMU |
| driver |
| * @id: identifier of the one instance of the TMU controller. |
| * @pdata: pointer to the tmu platform/configuration data |
| * @base: base address of the single instance of the TMU controller. |
| * @base_second: base address of the common registers of the TMU controller. |
| * @irq: irq number of the TMU controller. |
| * @soc: id of the SOC type. |
| * @irq_work: pointer to the irq work structure. |
| * @lock: lock to implement synchronization. |
| * @clk: pointer to the clock structure. |
| * @clk_sec: pointer to the clock structure for accessing the base_second. |
| * @sclk: pointer to the clock structure for accessing the tmu special clk. |
| * @temp_error1: fused value of the first point trim. |
| * @temp_error2: fused value of the second point trim. |
| * @regulator: pointer to the TMU regulator structure. |
| * @reg_conf: pointer to structure to register with core thermal. |
| * @tmu_initialize: SoC specific TMU initialization method |
| * @tmu_control: SoC specific TMU control method |
| * @tmu_read: SoC specific TMU temperature read method |
| * @tmu_set_emulation: SoC specific TMU emulation setting method |
| * @tmu_clear_irqs: SoC specific TMU interrupts clearing method |
| */ |
| struct exynos_tmu_data { |
| int id; |
| struct exynos_tmu_platform_data *pdata; |
| void __iomem *base; |
| void __iomem *base_second; |
| int irq; |
| enum soc_type soc; |
| struct work_struct irq_work; |
| struct mutex lock; |
| struct clk *clk, *clk_sec, *sclk; |
| u16 temp_error1, temp_error2; |
| struct regulator *regulator; |
| struct thermal_zone_device *tzd; |
| |
| int (*tmu_initialize)(struct platform_device *pdev); |
| void (*tmu_control)(struct platform_device *pdev, bool on); |
| int (*tmu_read)(struct exynos_tmu_data *data); |
| void (*tmu_set_emulation)(struct exynos_tmu_data *data, int temp); |
| void (*tmu_clear_irqs)(struct exynos_tmu_data *data); |
| }; |
| |
| static void exynos_report_trigger(struct exynos_tmu_data *p) |
| { |
| char data[10], *envp[] = { data, NULL }; |
| struct thermal_zone_device *tz = p->tzd; |
| int temp; |
| unsigned int i; |
| |
| if (!tz) { |
| pr_err("No thermal zone device defined\n"); |
| return; |
| } |
| |
| thermal_zone_device_update(tz); |
| |
| mutex_lock(&tz->lock); |
| /* Find the level for which trip happened */ |
| for (i = 0; i < of_thermal_get_ntrips(tz); i++) { |
| tz->ops->get_trip_temp(tz, i, &temp); |
| if (tz->last_temperature < temp) |
| break; |
| } |
| |
| snprintf(data, sizeof(data), "%u", i); |
| kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp); |
| mutex_unlock(&tz->lock); |
| } |
| |
| /* |
| * TMU treats temperature as a mapped temperature code. |
| * The temperature is converted differently depending on the calibration type. |
| */ |
| static int temp_to_code(struct exynos_tmu_data *data, u8 temp) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| int temp_code; |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp_code = (temp - pdata->first_point_trim) * |
| (data->temp_error2 - data->temp_error1) / |
| (pdata->second_point_trim - pdata->first_point_trim) + |
| data->temp_error1; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp_code = temp + data->temp_error1 - pdata->first_point_trim; |
| break; |
| default: |
| temp_code = temp + pdata->default_temp_offset; |
| break; |
| } |
| |
| return temp_code; |
| } |
| |
| /* |
| * Calculate a temperature value from a temperature code. |
| * The unit of the temperature is degree Celsius. |
| */ |
| static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| int temp; |
| |
| switch (pdata->cal_type) { |
| case TYPE_TWO_POINT_TRIMMING: |
| temp = (temp_code - data->temp_error1) * |
| (pdata->second_point_trim - pdata->first_point_trim) / |
| (data->temp_error2 - data->temp_error1) + |
| pdata->first_point_trim; |
| break; |
| case TYPE_ONE_POINT_TRIMMING: |
| temp = temp_code - data->temp_error1 + pdata->first_point_trim; |
| break; |
| default: |
| temp = temp_code - pdata->default_temp_offset; |
| break; |
| } |
| |
| return temp; |
| } |
| |
| static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| |
| data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; |
| data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & |
| EXYNOS_TMU_TEMP_MASK); |
| |
| if (!data->temp_error1 || |
| (pdata->min_efuse_value > data->temp_error1) || |
| (data->temp_error1 > pdata->max_efuse_value)) |
| data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; |
| |
| if (!data->temp_error2) |
| data->temp_error2 = |
| (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & |
| EXYNOS_TMU_TEMP_MASK; |
| } |
| |
| static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling) |
| { |
| struct thermal_zone_device *tz = data->tzd; |
| const struct thermal_trip * const trips = |
| of_thermal_get_trip_points(tz); |
| unsigned long temp; |
| int i; |
| |
| if (!trips) { |
| pr_err("%s: Cannot get trip points from of-thermal.c!\n", |
| __func__); |
| return 0; |
| } |
| |
| for (i = 0; i < of_thermal_get_ntrips(tz); i++) { |
| if (trips[i].type == THERMAL_TRIP_CRITICAL) |
| continue; |
| |
| temp = trips[i].temperature / MCELSIUS; |
| if (falling) |
| temp -= (trips[i].hysteresis / MCELSIUS); |
| else |
| threshold &= ~(0xff << 8 * i); |
| |
| threshold |= temp_to_code(data, temp) << 8 * i; |
| } |
| |
| return threshold; |
| } |
| |
| static int exynos_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| int ret; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| if (!IS_ERR(data->clk_sec)) |
| clk_enable(data->clk_sec); |
| ret = data->tmu_initialize(pdev); |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| if (!IS_ERR(data->clk_sec)) |
| clk_disable(data->clk_sec); |
| |
| return ret; |
| } |
| |
| static u32 get_con_reg(struct exynos_tmu_data *data, u32 con) |
| { |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4412 || |
| data->soc == SOC_ARCH_EXYNOS3250) |
| con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT); |
| |
| con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); |
| con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; |
| |
| con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); |
| con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); |
| |
| if (pdata->noise_cancel_mode) { |
| con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT); |
| con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT); |
| } |
| |
| return con; |
| } |
| |
| static void exynos_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| data->tmu_control(pdev, on); |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| } |
| |
| static int exynos4210_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| const struct thermal_trip * const trips = |
| of_thermal_get_trip_points(tz); |
| int ret = 0, threshold_code, i; |
| unsigned long reference, temp; |
| unsigned int status; |
| |
| if (!trips) { |
| pr_err("%s: Cannot get trip points from of-thermal.c!\n", |
| __func__); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| status = readb(data->base + EXYNOS_TMU_REG_STATUS); |
| if (!status) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO)); |
| |
| /* Write temperature code for threshold */ |
| reference = trips[0].temperature / MCELSIUS; |
| threshold_code = temp_to_code(data, reference); |
| if (threshold_code < 0) { |
| ret = threshold_code; |
| goto out; |
| } |
| writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP); |
| |
| for (i = 0; i < of_thermal_get_ntrips(tz); i++) { |
| temp = trips[i].temperature / MCELSIUS; |
| writeb(temp - reference, data->base + |
| EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4); |
| } |
| |
| data->tmu_clear_irqs(data); |
| out: |
| return ret; |
| } |
| |
| static int exynos4412_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| const struct thermal_trip * const trips = |
| of_thermal_get_trip_points(data->tzd); |
| unsigned int status, trim_info, con, ctrl, rising_threshold; |
| int ret = 0, threshold_code, i; |
| unsigned long crit_temp = 0; |
| |
| status = readb(data->base + EXYNOS_TMU_REG_STATUS); |
| if (!status) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| if (data->soc == SOC_ARCH_EXYNOS3250 || |
| data->soc == SOC_ARCH_EXYNOS4412 || |
| data->soc == SOC_ARCH_EXYNOS5250) { |
| if (data->soc == SOC_ARCH_EXYNOS3250) { |
| ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1); |
| ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; |
| writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1); |
| } |
| ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2); |
| ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE; |
| writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2); |
| } |
| |
| /* On exynos5420 the triminfo register is in the shared space */ |
| if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) |
| trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO); |
| else |
| trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); |
| |
| sanitize_temp_error(data, trim_info); |
| |
| /* Write temperature code for rising and falling threshold */ |
| rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE); |
| rising_threshold = get_th_reg(data, rising_threshold, false); |
| writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); |
| writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL); |
| |
| data->tmu_clear_irqs(data); |
| |
| /* if last threshold limit is also present */ |
| for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) { |
| if (trips[i].type == THERMAL_TRIP_CRITICAL) { |
| crit_temp = trips[i].temperature; |
| break; |
| } |
| } |
| |
| if (i == of_thermal_get_ntrips(data->tzd)) { |
| pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n", |
| __func__); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| threshold_code = temp_to_code(data, crit_temp / MCELSIUS); |
| /* 1-4 level to be assigned in th0 reg */ |
| rising_threshold &= ~(0xff << 8 * i); |
| rising_threshold |= threshold_code << 8 * i; |
| writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE); |
| con = readl(data->base + EXYNOS_TMU_REG_CONTROL); |
| con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| |
| out: |
| return ret; |
| } |
| |
| static int exynos5433_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int status, trim_info; |
| unsigned int rising_threshold = 0, falling_threshold = 0; |
| int temp, temp_hist; |
| int ret = 0, threshold_code, i, sensor_id, cal_type; |
| |
| status = readb(data->base + EXYNOS_TMU_REG_STATUS); |
| if (!status) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); |
| sanitize_temp_error(data, trim_info); |
| |
| /* Read the temperature sensor id */ |
| sensor_id = (trim_info & EXYNOS5433_TRIMINFO_SENSOR_ID_MASK) |
| >> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT; |
| dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n", sensor_id); |
| |
| /* Read the calibration mode */ |
| writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO); |
| cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK) |
| >> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; |
| |
| switch (cal_type) { |
| case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING: |
| pdata->cal_type = TYPE_ONE_POINT_TRIMMING; |
| break; |
| case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING: |
| pdata->cal_type = TYPE_TWO_POINT_TRIMMING; |
| break; |
| default: |
| pdata->cal_type = TYPE_ONE_POINT_TRIMMING; |
| break; |
| }; |
| |
| dev_info(&pdev->dev, "Calibration type is %d-point calibration\n", |
| cal_type ? 2 : 1); |
| |
| /* Write temperature code for rising and falling threshold */ |
| for (i = 0; i < of_thermal_get_ntrips(tz); i++) { |
| int rising_reg_offset, falling_reg_offset; |
| int j = 0; |
| |
| switch (i) { |
| case 0: |
| case 1: |
| case 2: |
| case 3: |
| rising_reg_offset = EXYNOS5433_THD_TEMP_RISE3_0; |
| falling_reg_offset = EXYNOS5433_THD_TEMP_FALL3_0; |
| j = i; |
| break; |
| case 4: |
| case 5: |
| case 6: |
| case 7: |
| rising_reg_offset = EXYNOS5433_THD_TEMP_RISE7_4; |
| falling_reg_offset = EXYNOS5433_THD_TEMP_FALL7_4; |
| j = i - 4; |
| break; |
| default: |
| continue; |
| } |
| |
| /* Write temperature code for rising threshold */ |
| tz->ops->get_trip_temp(tz, i, &temp); |
| temp /= MCELSIUS; |
| threshold_code = temp_to_code(data, temp); |
| |
| rising_threshold = readl(data->base + rising_reg_offset); |
| rising_threshold |= (threshold_code << j * 8); |
| writel(rising_threshold, data->base + rising_reg_offset); |
| |
| /* Write temperature code for falling threshold */ |
| tz->ops->get_trip_hyst(tz, i, &temp_hist); |
| temp_hist = temp - (temp_hist / MCELSIUS); |
| threshold_code = temp_to_code(data, temp_hist); |
| |
| falling_threshold = readl(data->base + falling_reg_offset); |
| falling_threshold &= ~(0xff << j * 8); |
| falling_threshold |= (threshold_code << j * 8); |
| writel(falling_threshold, data->base + falling_reg_offset); |
| } |
| |
| data->tmu_clear_irqs(data); |
| out: |
| return ret; |
| } |
| |
| static int exynos5440_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| unsigned int trim_info = 0, con, rising_threshold; |
| int ret = 0, threshold_code; |
| int crit_temp = 0; |
| |
| /* |
| * For exynos5440 soc triminfo value is swapped between TMU0 and |
| * TMU2, so the below logic is needed. |
| */ |
| switch (data->id) { |
| case 0: |
| trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET + |
| EXYNOS5440_TMU_S0_7_TRIM); |
| break; |
| case 1: |
| trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM); |
| break; |
| case 2: |
| trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET + |
| EXYNOS5440_TMU_S0_7_TRIM); |
| } |
| sanitize_temp_error(data, trim_info); |
| |
| /* Write temperature code for rising and falling threshold */ |
| rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0); |
| rising_threshold = get_th_reg(data, rising_threshold, false); |
| writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0); |
| writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1); |
| |
| data->tmu_clear_irqs(data); |
| |
| /* if last threshold limit is also present */ |
| if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) { |
| threshold_code = temp_to_code(data, crit_temp / MCELSIUS); |
| /* 5th level to be assigned in th2 reg */ |
| rising_threshold = |
| threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT; |
| writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2); |
| con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL); |
| con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT); |
| writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); |
| } |
| /* Clear the PMIN in the common TMU register */ |
| if (!data->id) |
| writel(0, data->base_second + EXYNOS5440_TMU_PMIN); |
| return ret; |
| } |
| |
| static int exynos7_tmu_initialize(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| struct exynos_tmu_platform_data *pdata = data->pdata; |
| unsigned int status, trim_info; |
| unsigned int rising_threshold = 0, falling_threshold = 0; |
| int ret = 0, threshold_code, i; |
| int temp, temp_hist; |
| unsigned int reg_off, bit_off; |
| |
| status = readb(data->base + EXYNOS_TMU_REG_STATUS); |
| if (!status) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO); |
| |
| data->temp_error1 = trim_info & EXYNOS7_TMU_TEMP_MASK; |
| if (!data->temp_error1 || |
| (pdata->min_efuse_value > data->temp_error1) || |
| (data->temp_error1 > pdata->max_efuse_value)) |
| data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK; |
| |
| /* Write temperature code for rising and falling threshold */ |
| for (i = (of_thermal_get_ntrips(tz) - 1); i >= 0; i--) { |
| /* |
| * On exynos7 there are 4 rising and 4 falling threshold |
| * registers (0x50-0x5c and 0x60-0x6c respectively). Each |
| * register holds the value of two threshold levels (at bit |
| * offsets 0 and 16). Based on the fact that there are atmost |
| * eight possible trigger levels, calculate the register and |
| * bit offsets where the threshold levels are to be written. |
| * |
| * e.g. EXYNOS7_THD_TEMP_RISE7_6 (0x50) |
| * [24:16] - Threshold level 7 |
| * [8:0] - Threshold level 6 |
| * e.g. EXYNOS7_THD_TEMP_RISE5_4 (0x54) |
| * [24:16] - Threshold level 5 |
| * [8:0] - Threshold level 4 |
| * |
| * and similarly for falling thresholds. |
| * |
| * Based on the above, calculate the register and bit offsets |
| * for rising/falling threshold levels and populate them. |
| */ |
| reg_off = ((7 - i) / 2) * 4; |
| bit_off = ((8 - i) % 2); |
| |
| tz->ops->get_trip_temp(tz, i, &temp); |
| temp /= MCELSIUS; |
| |
| tz->ops->get_trip_hyst(tz, i, &temp_hist); |
| temp_hist = temp - (temp_hist / MCELSIUS); |
| |
| /* Set 9-bit temperature code for rising threshold levels */ |
| threshold_code = temp_to_code(data, temp); |
| rising_threshold = readl(data->base + |
| EXYNOS7_THD_TEMP_RISE7_6 + reg_off); |
| rising_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); |
| rising_threshold |= threshold_code << (16 * bit_off); |
| writel(rising_threshold, |
| data->base + EXYNOS7_THD_TEMP_RISE7_6 + reg_off); |
| |
| /* Set 9-bit temperature code for falling threshold levels */ |
| threshold_code = temp_to_code(data, temp_hist); |
| falling_threshold &= ~(EXYNOS7_TMU_TEMP_MASK << (16 * bit_off)); |
| falling_threshold |= threshold_code << (16 * bit_off); |
| writel(falling_threshold, |
| data->base + EXYNOS7_THD_TEMP_FALL7_6 + reg_off); |
| } |
| |
| data->tmu_clear_irqs(data); |
| out: |
| return ret; |
| } |
| |
| static void exynos4210_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int con, interrupt_en; |
| |
| con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); |
| |
| if (on) { |
| con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| interrupt_en = |
| (of_thermal_is_trip_valid(tz, 3) |
| << EXYNOS_TMU_INTEN_RISE3_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 2) |
| << EXYNOS_TMU_INTEN_RISE2_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 1) |
| << EXYNOS_TMU_INTEN_RISE1_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 0) |
| << EXYNOS_TMU_INTEN_RISE0_SHIFT); |
| |
| if (data->soc != SOC_ARCH_EXYNOS4210) |
| interrupt_en |= |
| interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; |
| } else { |
| con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| interrupt_en = 0; /* Disable all interrupts */ |
| } |
| writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| } |
| |
| static void exynos5433_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int con, interrupt_en, pd_det_en; |
| |
| con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); |
| |
| if (on) { |
| con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| interrupt_en = |
| (of_thermal_is_trip_valid(tz, 7) |
| << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 6) |
| << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 5) |
| << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 4) |
| << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 3) |
| << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 2) |
| << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 1) |
| << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 0) |
| << EXYNOS7_TMU_INTEN_RISE0_SHIFT); |
| |
| interrupt_en |= |
| interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; |
| } else { |
| con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| interrupt_en = 0; /* Disable all interrupts */ |
| } |
| |
| pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0; |
| |
| writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN); |
| writel(interrupt_en, data->base + EXYNOS5433_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| } |
| |
| static void exynos5440_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int con, interrupt_en; |
| |
| con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL)); |
| |
| if (on) { |
| con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| interrupt_en = |
| (of_thermal_is_trip_valid(tz, 3) |
| << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 2) |
| << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 1) |
| << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 0) |
| << EXYNOS5440_TMU_INTEN_RISE0_SHIFT); |
| interrupt_en |= |
| interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT; |
| } else { |
| con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| interrupt_en = 0; /* Disable all interrupts */ |
| } |
| writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN); |
| writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL); |
| } |
| |
| static void exynos7_tmu_control(struct platform_device *pdev, bool on) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tz = data->tzd; |
| unsigned int con, interrupt_en; |
| |
| con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL)); |
| |
| if (on) { |
| con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| con |= (1 << EXYNOS7_PD_DET_EN_SHIFT); |
| interrupt_en = |
| (of_thermal_is_trip_valid(tz, 7) |
| << EXYNOS7_TMU_INTEN_RISE7_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 6) |
| << EXYNOS7_TMU_INTEN_RISE6_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 5) |
| << EXYNOS7_TMU_INTEN_RISE5_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 4) |
| << EXYNOS7_TMU_INTEN_RISE4_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 3) |
| << EXYNOS7_TMU_INTEN_RISE3_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 2) |
| << EXYNOS7_TMU_INTEN_RISE2_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 1) |
| << EXYNOS7_TMU_INTEN_RISE1_SHIFT) | |
| (of_thermal_is_trip_valid(tz, 0) |
| << EXYNOS7_TMU_INTEN_RISE0_SHIFT); |
| |
| interrupt_en |= |
| interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT; |
| } else { |
| con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); |
| con &= ~(1 << EXYNOS7_PD_DET_EN_SHIFT); |
| interrupt_en = 0; /* Disable all interrupts */ |
| } |
| |
| writel(interrupt_en, data->base + EXYNOS7_TMU_REG_INTEN); |
| writel(con, data->base + EXYNOS_TMU_REG_CONTROL); |
| } |
| |
| static int exynos_get_temp(void *p, int *temp) |
| { |
| struct exynos_tmu_data *data = p; |
| |
| if (!data || !data->tmu_read) |
| return -EINVAL; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| *temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS; |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_THERMAL_EMULATION |
| static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val, |
| int temp) |
| { |
| if (temp) { |
| temp /= MCELSIUS; |
| |
| if (data->soc != SOC_ARCH_EXYNOS5440) { |
| val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT); |
| val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT); |
| } |
| if (data->soc == SOC_ARCH_EXYNOS7) { |
| val &= ~(EXYNOS7_EMUL_DATA_MASK << |
| EXYNOS7_EMUL_DATA_SHIFT); |
| val |= (temp_to_code(data, temp) << |
| EXYNOS7_EMUL_DATA_SHIFT) | |
| EXYNOS_EMUL_ENABLE; |
| } else { |
| val &= ~(EXYNOS_EMUL_DATA_MASK << |
| EXYNOS_EMUL_DATA_SHIFT); |
| val |= (temp_to_code(data, temp) << |
| EXYNOS_EMUL_DATA_SHIFT) | |
| EXYNOS_EMUL_ENABLE; |
| } |
| } else { |
| val &= ~EXYNOS_EMUL_ENABLE; |
| } |
| |
| return val; |
| } |
| |
| static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data, |
| int temp) |
| { |
| unsigned int val; |
| u32 emul_con; |
| |
| if (data->soc == SOC_ARCH_EXYNOS5260) |
| emul_con = EXYNOS5260_EMUL_CON; |
| if (data->soc == SOC_ARCH_EXYNOS5433) |
| emul_con = EXYNOS5433_TMU_EMUL_CON; |
| else if (data->soc == SOC_ARCH_EXYNOS7) |
| emul_con = EXYNOS7_TMU_REG_EMUL_CON; |
| else |
| emul_con = EXYNOS_EMUL_CON; |
| |
| val = readl(data->base + emul_con); |
| val = get_emul_con_reg(data, val, temp); |
| writel(val, data->base + emul_con); |
| } |
| |
| static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data, |
| int temp) |
| { |
| unsigned int val; |
| |
| val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG); |
| val = get_emul_con_reg(data, val, temp); |
| writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG); |
| } |
| |
| static int exynos_tmu_set_emulation(void *drv_data, int temp) |
| { |
| struct exynos_tmu_data *data = drv_data; |
| int ret = -EINVAL; |
| |
| if (data->soc == SOC_ARCH_EXYNOS4210) |
| goto out; |
| |
| if (temp && temp < MCELSIUS) |
| goto out; |
| |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| data->tmu_set_emulation(data, temp); |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| return 0; |
| out: |
| return ret; |
| } |
| #else |
| #define exynos4412_tmu_set_emulation NULL |
| #define exynos5440_tmu_set_emulation NULL |
| static int exynos_tmu_set_emulation(void *drv_data, int temp) |
| { return -EINVAL; } |
| #endif /* CONFIG_THERMAL_EMULATION */ |
| |
| static int exynos4210_tmu_read(struct exynos_tmu_data *data) |
| { |
| int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); |
| |
| /* "temp_code" should range between 75 and 175 */ |
| return (ret < 75 || ret > 175) ? -ENODATA : ret; |
| } |
| |
| static int exynos4412_tmu_read(struct exynos_tmu_data *data) |
| { |
| return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP); |
| } |
| |
| static int exynos5440_tmu_read(struct exynos_tmu_data *data) |
| { |
| return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP); |
| } |
| |
| static int exynos7_tmu_read(struct exynos_tmu_data *data) |
| { |
| return readw(data->base + EXYNOS_TMU_REG_CURRENT_TEMP) & |
| EXYNOS7_TMU_TEMP_MASK; |
| } |
| |
| static void exynos_tmu_work(struct work_struct *work) |
| { |
| struct exynos_tmu_data *data = container_of(work, |
| struct exynos_tmu_data, irq_work); |
| unsigned int val_type; |
| |
| if (!IS_ERR(data->clk_sec)) |
| clk_enable(data->clk_sec); |
| /* Find which sensor generated this interrupt */ |
| if (data->soc == SOC_ARCH_EXYNOS5440) { |
| val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS); |
| if (!((val_type >> data->id) & 0x1)) |
| goto out; |
| } |
| if (!IS_ERR(data->clk_sec)) |
| clk_disable(data->clk_sec); |
| |
| exynos_report_trigger(data); |
| mutex_lock(&data->lock); |
| clk_enable(data->clk); |
| |
| /* TODO: take action based on particular interrupt */ |
| data->tmu_clear_irqs(data); |
| |
| clk_disable(data->clk); |
| mutex_unlock(&data->lock); |
| out: |
| enable_irq(data->irq); |
| } |
| |
| static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data) |
| { |
| unsigned int val_irq; |
| u32 tmu_intstat, tmu_intclear; |
| |
| if (data->soc == SOC_ARCH_EXYNOS5260) { |
| tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT; |
| tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR; |
| } else if (data->soc == SOC_ARCH_EXYNOS7) { |
| tmu_intstat = EXYNOS7_TMU_REG_INTPEND; |
| tmu_intclear = EXYNOS7_TMU_REG_INTPEND; |
| } else if (data->soc == SOC_ARCH_EXYNOS5433) { |
| tmu_intstat = EXYNOS5433_TMU_REG_INTPEND; |
| tmu_intclear = EXYNOS5433_TMU_REG_INTPEND; |
| } else { |
| tmu_intstat = EXYNOS_TMU_REG_INTSTAT; |
| tmu_intclear = EXYNOS_TMU_REG_INTCLEAR; |
| } |
| |
| val_irq = readl(data->base + tmu_intstat); |
| /* |
| * Clear the interrupts. Please note that the documentation for |
| * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly |
| * states that INTCLEAR register has a different placing of bits |
| * responsible for FALL IRQs than INTSTAT register. Exynos5420 |
| * and Exynos5440 documentation is correct (Exynos4210 doesn't |
| * support FALL IRQs at all). |
| */ |
| writel(val_irq, data->base + tmu_intclear); |
| } |
| |
| static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data) |
| { |
| unsigned int val_irq; |
| |
| val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ); |
| /* clear the interrupts */ |
| writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ); |
| } |
| |
| static irqreturn_t exynos_tmu_irq(int irq, void *id) |
| { |
| struct exynos_tmu_data *data = id; |
| |
| disable_irq_nosync(irq); |
| schedule_work(&data->irq_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct of_device_id exynos_tmu_match[] = { |
| { .compatible = "samsung,exynos3250-tmu", }, |
| { .compatible = "samsung,exynos4210-tmu", }, |
| { .compatible = "samsung,exynos4412-tmu", }, |
| { .compatible = "samsung,exynos5250-tmu", }, |
| { .compatible = "samsung,exynos5260-tmu", }, |
| { .compatible = "samsung,exynos5420-tmu", }, |
| { .compatible = "samsung,exynos5420-tmu-ext-triminfo", }, |
| { .compatible = "samsung,exynos5433-tmu", }, |
| { .compatible = "samsung,exynos5440-tmu", }, |
| { .compatible = "samsung,exynos7-tmu", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_tmu_match); |
| |
| static int exynos_of_get_soc_type(struct device_node *np) |
| { |
| if (of_device_is_compatible(np, "samsung,exynos3250-tmu")) |
| return SOC_ARCH_EXYNOS3250; |
| else if (of_device_is_compatible(np, "samsung,exynos4210-tmu")) |
| return SOC_ARCH_EXYNOS4210; |
| else if (of_device_is_compatible(np, "samsung,exynos4412-tmu")) |
| return SOC_ARCH_EXYNOS4412; |
| else if (of_device_is_compatible(np, "samsung,exynos5250-tmu")) |
| return SOC_ARCH_EXYNOS5250; |
| else if (of_device_is_compatible(np, "samsung,exynos5260-tmu")) |
| return SOC_ARCH_EXYNOS5260; |
| else if (of_device_is_compatible(np, "samsung,exynos5420-tmu")) |
| return SOC_ARCH_EXYNOS5420; |
| else if (of_device_is_compatible(np, |
| "samsung,exynos5420-tmu-ext-triminfo")) |
| return SOC_ARCH_EXYNOS5420_TRIMINFO; |
| else if (of_device_is_compatible(np, "samsung,exynos5433-tmu")) |
| return SOC_ARCH_EXYNOS5433; |
| else if (of_device_is_compatible(np, "samsung,exynos5440-tmu")) |
| return SOC_ARCH_EXYNOS5440; |
| else if (of_device_is_compatible(np, "samsung,exynos7-tmu")) |
| return SOC_ARCH_EXYNOS7; |
| |
| return -EINVAL; |
| } |
| |
| static int exynos_of_sensor_conf(struct device_node *np, |
| struct exynos_tmu_platform_data *pdata) |
| { |
| u32 value; |
| int ret; |
| |
| of_node_get(np); |
| |
| ret = of_property_read_u32(np, "samsung,tmu_gain", &value); |
| pdata->gain = (u8)value; |
| of_property_read_u32(np, "samsung,tmu_reference_voltage", &value); |
| pdata->reference_voltage = (u8)value; |
| of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value); |
| pdata->noise_cancel_mode = (u8)value; |
| |
| of_property_read_u32(np, "samsung,tmu_efuse_value", |
| &pdata->efuse_value); |
| of_property_read_u32(np, "samsung,tmu_min_efuse_value", |
| &pdata->min_efuse_value); |
| of_property_read_u32(np, "samsung,tmu_max_efuse_value", |
| &pdata->max_efuse_value); |
| |
| of_property_read_u32(np, "samsung,tmu_first_point_trim", &value); |
| pdata->first_point_trim = (u8)value; |
| of_property_read_u32(np, "samsung,tmu_second_point_trim", &value); |
| pdata->second_point_trim = (u8)value; |
| of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value); |
| pdata->default_temp_offset = (u8)value; |
| |
| of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type); |
| of_property_read_u32(np, "samsung,tmu_cal_mode", &pdata->cal_mode); |
| |
| of_node_put(np); |
| return 0; |
| } |
| |
| static int exynos_map_dt_data(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct exynos_tmu_platform_data *pdata; |
| struct resource res; |
| int ret; |
| |
| if (!data || !pdev->dev.of_node) |
| return -ENODEV; |
| |
| /* |
| * Try enabling the regulator if found |
| * TODO: Add regulator as an SOC feature, so that regulator enable |
| * is a compulsory call. |
| */ |
| data->regulator = devm_regulator_get(&pdev->dev, "vtmu"); |
| if (!IS_ERR(data->regulator)) { |
| ret = regulator_enable(data->regulator); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to enable vtmu\n"); |
| return ret; |
| } |
| } else { |
| dev_info(&pdev->dev, "Regulator node (vtmu) not found\n"); |
| } |
| |
| data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl"); |
| if (data->id < 0) |
| data->id = 0; |
| |
| data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); |
| if (data->irq <= 0) { |
| dev_err(&pdev->dev, "failed to get IRQ\n"); |
| return -ENODEV; |
| } |
| |
| if (of_address_to_resource(pdev->dev.of_node, 0, &res)) { |
| dev_err(&pdev->dev, "failed to get Resource 0\n"); |
| return -ENODEV; |
| } |
| |
| data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res)); |
| if (!data->base) { |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| return -EADDRNOTAVAIL; |
| } |
| |
| pdata = devm_kzalloc(&pdev->dev, |
| sizeof(struct exynos_tmu_platform_data), |
| GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| exynos_of_sensor_conf(pdev->dev.of_node, pdata); |
| data->pdata = pdata; |
| data->soc = exynos_of_get_soc_type(pdev->dev.of_node); |
| |
| switch (data->soc) { |
| case SOC_ARCH_EXYNOS4210: |
| data->tmu_initialize = exynos4210_tmu_initialize; |
| data->tmu_control = exynos4210_tmu_control; |
| data->tmu_read = exynos4210_tmu_read; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| break; |
| case SOC_ARCH_EXYNOS3250: |
| case SOC_ARCH_EXYNOS4412: |
| case SOC_ARCH_EXYNOS5250: |
| case SOC_ARCH_EXYNOS5260: |
| case SOC_ARCH_EXYNOS5420: |
| case SOC_ARCH_EXYNOS5420_TRIMINFO: |
| data->tmu_initialize = exynos4412_tmu_initialize; |
| data->tmu_control = exynos4210_tmu_control; |
| data->tmu_read = exynos4412_tmu_read; |
| data->tmu_set_emulation = exynos4412_tmu_set_emulation; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| break; |
| case SOC_ARCH_EXYNOS5433: |
| data->tmu_initialize = exynos5433_tmu_initialize; |
| data->tmu_control = exynos5433_tmu_control; |
| data->tmu_read = exynos4412_tmu_read; |
| data->tmu_set_emulation = exynos4412_tmu_set_emulation; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| break; |
| case SOC_ARCH_EXYNOS5440: |
| data->tmu_initialize = exynos5440_tmu_initialize; |
| data->tmu_control = exynos5440_tmu_control; |
| data->tmu_read = exynos5440_tmu_read; |
| data->tmu_set_emulation = exynos5440_tmu_set_emulation; |
| data->tmu_clear_irqs = exynos5440_tmu_clear_irqs; |
| break; |
| case SOC_ARCH_EXYNOS7: |
| data->tmu_initialize = exynos7_tmu_initialize; |
| data->tmu_control = exynos7_tmu_control; |
| data->tmu_read = exynos7_tmu_read; |
| data->tmu_set_emulation = exynos4412_tmu_set_emulation; |
| data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; |
| break; |
| default: |
| dev_err(&pdev->dev, "Platform not supported\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Check if the TMU shares some registers and then try to map the |
| * memory of common registers. |
| */ |
| if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO && |
| data->soc != SOC_ARCH_EXYNOS5440) |
| return 0; |
| |
| if (of_address_to_resource(pdev->dev.of_node, 1, &res)) { |
| dev_err(&pdev->dev, "failed to get Resource 1\n"); |
| return -ENODEV; |
| } |
| |
| data->base_second = devm_ioremap(&pdev->dev, res.start, |
| resource_size(&res)); |
| if (!data->base_second) { |
| dev_err(&pdev->dev, "Failed to ioremap memory\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static struct thermal_zone_of_device_ops exynos_sensor_ops = { |
| .get_temp = exynos_get_temp, |
| .set_emul_temp = exynos_tmu_set_emulation, |
| }; |
| |
| static int exynos_tmu_probe(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data; |
| int ret; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, data); |
| mutex_init(&data->lock); |
| |
| data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data, |
| &exynos_sensor_ops); |
| if (IS_ERR(data->tzd)) { |
| pr_err("thermal: tz: %p ERROR\n", data->tzd); |
| return PTR_ERR(data->tzd); |
| } |
| ret = exynos_map_dt_data(pdev); |
| if (ret) |
| goto err_sensor; |
| |
| INIT_WORK(&data->irq_work, exynos_tmu_work); |
| |
| data->clk = devm_clk_get(&pdev->dev, "tmu_apbif"); |
| if (IS_ERR(data->clk)) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| ret = PTR_ERR(data->clk); |
| goto err_sensor; |
| } |
| |
| data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif"); |
| if (IS_ERR(data->clk_sec)) { |
| if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) { |
| dev_err(&pdev->dev, "Failed to get triminfo clock\n"); |
| ret = PTR_ERR(data->clk_sec); |
| goto err_sensor; |
| } |
| } else { |
| ret = clk_prepare(data->clk_sec); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| goto err_sensor; |
| } |
| } |
| |
| ret = clk_prepare(data->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| goto err_clk_sec; |
| } |
| |
| switch (data->soc) { |
| case SOC_ARCH_EXYNOS5433: |
| case SOC_ARCH_EXYNOS7: |
| data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk"); |
| if (IS_ERR(data->sclk)) { |
| dev_err(&pdev->dev, "Failed to get sclk\n"); |
| goto err_clk; |
| } else { |
| ret = clk_prepare_enable(data->sclk); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to enable sclk\n"); |
| goto err_clk; |
| } |
| } |
| break; |
| default: |
| break; |
| }; |
| |
| ret = exynos_tmu_initialize(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to initialize TMU\n"); |
| goto err_sclk; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq, |
| IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); |
| goto err_sclk; |
| } |
| |
| exynos_tmu_control(pdev, true); |
| return 0; |
| err_sclk: |
| clk_disable_unprepare(data->sclk); |
| err_clk: |
| clk_unprepare(data->clk); |
| err_clk_sec: |
| if (!IS_ERR(data->clk_sec)) |
| clk_unprepare(data->clk_sec); |
| err_sensor: |
| if (!IS_ERR_OR_NULL(data->regulator)) |
| regulator_disable(data->regulator); |
| thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd); |
| |
| return ret; |
| } |
| |
| static int exynos_tmu_remove(struct platform_device *pdev) |
| { |
| struct exynos_tmu_data *data = platform_get_drvdata(pdev); |
| struct thermal_zone_device *tzd = data->tzd; |
| |
| thermal_zone_of_sensor_unregister(&pdev->dev, tzd); |
| exynos_tmu_control(pdev, false); |
| |
| clk_disable_unprepare(data->sclk); |
| clk_unprepare(data->clk); |
| if (!IS_ERR(data->clk_sec)) |
| clk_unprepare(data->clk_sec); |
| |
| if (!IS_ERR(data->regulator)) |
| regulator_disable(data->regulator); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int exynos_tmu_suspend(struct device *dev) |
| { |
| exynos_tmu_control(to_platform_device(dev), false); |
| |
| return 0; |
| } |
| |
| static int exynos_tmu_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| exynos_tmu_initialize(pdev); |
| exynos_tmu_control(pdev, true); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(exynos_tmu_pm, |
| exynos_tmu_suspend, exynos_tmu_resume); |
| #define EXYNOS_TMU_PM (&exynos_tmu_pm) |
| #else |
| #define EXYNOS_TMU_PM NULL |
| #endif |
| |
| static struct platform_driver exynos_tmu_driver = { |
| .driver = { |
| .name = "exynos-tmu", |
| .pm = EXYNOS_TMU_PM, |
| .of_match_table = exynos_tmu_match, |
| }, |
| .probe = exynos_tmu_probe, |
| .remove = exynos_tmu_remove, |
| }; |
| |
| module_platform_driver(exynos_tmu_driver); |
| |
| MODULE_DESCRIPTION("EXYNOS TMU Driver"); |
| MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:exynos-tmu"); |