OMAP: DSS2: move memory_read()
Move memory_read() from omap_dss_device to omap_dss_driver.
This is part of a larger patch-set, which moves the control from omapdss
driver to the display driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index fa27d68..a336384 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -495,10 +495,6 @@
bool (*get_mirror)(struct omap_dss_device *dssdev);
int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
- int (*memory_read)(struct omap_dss_device *dssdev,
- void *buf, size_t size,
- u16 x, u16 y, u16 w, u16 h);
-
int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
u32 (*get_wss)(struct omap_dss_device *dssdev);
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index e6d0954..5f78d38 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -847,6 +847,10 @@
int first = 1;
int plen;
unsigned buf_used = 0;
+ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
+ if (!td->enabled)
+ return -ENODEV;
if (size < w * h * 3)
return -ENOMEM;
@@ -855,6 +859,8 @@
dssdev->panel.timings.x_res *
dssdev->panel.timings.y_res * 3);
+ dsi_bus_lock();
+
/* plen 1 or 2 goes into short packet. until checksum error is fixed,
* use short packets. plen 32 works, but bigger packets seem to cause
* an error. */
@@ -863,11 +869,11 @@
else
plen = 2;
- taal_setup_update(dssdev, x, y, w, h);
+ taal_set_update_window(x, y, w, h);
r = dsi_vc_set_max_rx_packet_size(TCH, plen);
if (r)
- return r;
+ goto err0;
while (buf_used < size) {
u8 dcs_cmd = first ? 0x2e : 0x3e;
@@ -900,7 +906,8 @@
err:
dsi_vc_set_max_rx_packet_size(TCH, 1);
-
+err0:
+ dsi_bus_unlock();
return r;
}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index f01c9ca..638d8c2 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -3584,34 +3584,6 @@
return dssdev->driver->get_mirror(dssdev);
}
-static int dsi_display_memory_read(struct omap_dss_device *dssdev,
- void *buf, size_t size,
- u16 x, u16 y, u16 w, u16 h)
-{
- int r;
-
- DSSDBGF("");
-
- if (!dssdev->driver->memory_read)
- return -EINVAL;
-
- if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
- return -EIO;
-
- dsi_bus_lock();
-
- r = dssdev->driver->memory_read(dssdev, buf, size,
- x, y, w, h);
-
- /* Memory read usually changes the update area. This will
- * force the next update to re-set the update area */
- dsi.active_update_region.dirty = true;
-
- dsi_bus_unlock();
-
- return r;
-}
-
void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
u32 fifo_size, enum omap_burst_size *burst_size,
u32 *fifo_low, u32 *fifo_high)
@@ -3646,8 +3618,6 @@
dssdev->get_mirror = dsi_display_get_mirror;
dssdev->set_mirror = dsi_display_set_mirror;
- dssdev->memory_read = dsi_display_memory_read;
-
/* XXX these should be figured out dynamically */
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 6dc9b5c..6e0186e 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -374,7 +374,7 @@
void *buf;
int r;
- if (!display || !display->memory_read)
+ if (!display || !display->driver->memory_read)
return -ENOENT;
if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size))
@@ -389,7 +389,7 @@
return -ENOMEM;
}
- r = display->memory_read(display, buf, mr->buffer_size,
+ r = display->driver->memory_read(display, buf, mr->buffer_size,
mr->x, mr->y, mr->w, mr->h);
if (r > 0) {