[SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging
Adjust LOG_FCP logging to be more meaningful.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 97ae98d..125179af 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -297,8 +297,10 @@
uint32_t fcpi_parm = lpfc_cmd->cur_iocbq.iocb.un.fcpi.fcpi_parm;
uint32_t resp_info = fcprsp->rspStatus2;
uint32_t scsi_status = fcprsp->rspStatus3;
+ uint32_t *lp;
uint32_t host_status = DID_OK;
uint32_t rsplen = 0;
+ uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
/*
* If this is a task management command, there is no
@@ -310,10 +312,25 @@
goto out;
}
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0730 FCP command failed: RSP "
- "Data: x%x x%x x%x x%x x%x x%x\n",
- phba->brd_no, resp_info, scsi_status,
+ if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
+ uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
+ if (snslen > SCSI_SENSE_BUFFERSIZE)
+ snslen = SCSI_SENSE_BUFFERSIZE;
+
+ if (resp_info & RSP_LEN_VALID)
+ rsplen = be32_to_cpu(fcprsp->rspRspLen);
+ memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
+ }
+ lp = (uint32_t *)cmnd->sense_buffer;
+
+ if (!scsi_status && (resp_info & RESID_UNDER))
+ logit = LOG_FCP;
+
+ lpfc_printf_log(phba, KERN_WARNING, logit,
+ "%d:0730 FCP command x%x failed: x%x SNS x%x x%x "
+ "Data: x%x x%x x%x x%x x%x\n",
+ phba->brd_no, cmnd->cmnd[0], scsi_status,
+ be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
be32_to_cpu(fcprsp->rspResId),
be32_to_cpu(fcprsp->rspSnsLen),
be32_to_cpu(fcprsp->rspRspLen),
@@ -328,14 +345,6 @@
}
}
- if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
- uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
- if (snslen > SCSI_SENSE_BUFFERSIZE)
- snslen = SCSI_SENSE_BUFFERSIZE;
-
- memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
- }
-
cmnd->resid = 0;
if (resp_info & RESID_UNDER) {
cmnd->resid = be32_to_cpu(fcprsp->rspResId);
@@ -378,7 +387,7 @@
*/
} else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
(cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
"%d:0734 FCP Read Check Error Data: "
"x%x x%x x%x x%x\n", phba->brd_no,
be32_to_cpu(fcpcmd->fcpDl),