netxen: fix link speed reporting for some boards
o Read negotiated link speed when link state changes.
o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and
10Gbps ports.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index acb2ac9..a674a23 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -499,7 +499,8 @@
NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
- NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
+ NETXEN_BRDTYPE_P3_10G_XFP = 0x0032,
+ NETXEN_BRDTYPE_P3_10G_TP = 0x0080
} netxen_brdtype_t;
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index e45ce29..c0bd40f 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -136,11 +136,9 @@
ecmd->port = PORT_TP;
- if (netif_running(dev)) {
- ecmd->speed = adapter->link_speed;
- ecmd->duplex = adapter->link_duplex;
- ecmd->autoneg = adapter->link_autoneg;
- }
+ ecmd->speed = adapter->link_speed;
+ ecmd->duplex = adapter->link_duplex;
+ ecmd->autoneg = adapter->link_autoneg;
} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
u32 val;
@@ -171,7 +169,7 @@
} else
return -EIO;
- ecmd->phy_address = adapter->portnum;
+ ecmd->phy_address = adapter->physical_port;
ecmd->transceiver = XCVR_EXTERNAL;
switch ((netxen_brdtype_t) boardinfo->board_type) {
@@ -180,13 +178,13 @@
case NETXEN_BRDTYPE_P3_REF_QG:
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
- case NETXEN_BRDTYPE_P3_10000_BASE_T:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4:
case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+ case NETXEN_BRDTYPE_P3_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
@@ -204,16 +202,33 @@
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
- case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
case NETXEN_BRDTYPE_P3_10G_SFP_CT:
case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+ ecmd->advertising |= ADVERTISED_TP;
+ ecmd->supported |= SUPPORTED_TP;
+ case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
+ case NETXEN_BRDTYPE_P3_10G_TP:
+ if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
+ ecmd->autoneg = AUTONEG_DISABLE;
+ ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+ ecmd->advertising |=
+ (ADVERTISED_FIBRE | ADVERTISED_TP);
+ ecmd->port = PORT_FIBRE;
+ } else {
+ ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
+ ecmd->advertising |=
+ (ADVERTISED_TP | ADVERTISED_Autoneg);
+ ecmd->port = PORT_TP;
+ }
+ break;
default:
printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
(netxen_brdtype_t) boardinfo->board_type);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 98d0bcd..4276f7f 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -2036,7 +2036,13 @@
rv = -1;
}
- DPRINTK(INFO, "Discovered board type:0x%x ", boardinfo->board_type);
+ if (boardinfo->board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
+ u32 gpio = netxen_nic_reg_read(adapter,
+ NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+ if ((gpio & 0x8000) == 0)
+ boardinfo->board_type = NETXEN_BRDTYPE_P3_10G_TP;
+ }
+
switch ((netxen_brdtype_t) boardinfo->board_type) {
case NETXEN_BRDTYPE_P2_SB35_4G:
adapter->ahw.board_type = NETXEN_NIC_GBE;
@@ -2055,7 +2061,6 @@
case NETXEN_BRDTYPE_P3_10G_SFP_QT:
case NETXEN_BRDTYPE_P3_10G_XFP:
case NETXEN_BRDTYPE_P3_10000_BASE_T:
-
adapter->ahw.board_type = NETXEN_NIC_XGBE;
break;
case NETXEN_BRDTYPE_P1_BD:
@@ -2065,9 +2070,12 @@
case NETXEN_BRDTYPE_P3_REF_QG:
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
-
adapter->ahw.board_type = NETXEN_NIC_GBE;
break;
+ case NETXEN_BRDTYPE_P3_10G_TP:
+ adapter->ahw.board_type = (adapter->portnum < 2) ?
+ NETXEN_NIC_XGBE : NETXEN_NIC_GBE;
+ break;
default:
printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
boardinfo->board_type);
@@ -2112,12 +2120,16 @@
{
__u32 status;
__u32 autoneg;
- __u32 mode;
__u32 port_mode;
- netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
- if (netxen_get_niu_enable_ge(mode)) { /* Gb 10/100/1000 Mbps mode */
+ if (!netif_carrier_ok(adapter->netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = -1;
+ adapter->link_autoneg = AUTONEG_ENABLE;
+ return;
+ }
+ if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
adapter->hw_read_wx(adapter,
NETXEN_PORT_MODE_ADDR, &port_mode, 4);
if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
@@ -2143,7 +2155,7 @@
adapter->link_speed = SPEED_1000;
break;
default:
- adapter->link_speed = -1;
+ adapter->link_speed = 0;
break;
}
switch (netxen_get_phy_duplex(status)) {
@@ -2166,7 +2178,7 @@
goto link_down;
} else {
link_down:
- adapter->link_speed = -1;
+ adapter->link_speed = 0;
adapter->link_duplex = -1;
}
}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index cb39123..2c6ce6f 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -243,7 +243,7 @@
case NETXEN_BRDTYPE_P3_4_GB:
case NETXEN_BRDTYPE_P3_4_GB_MM:
adapter->msix_supported = !!use_msi_x;
- adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+ adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
break;
case NETXEN_BRDTYPE_P2_SB35_4G:
@@ -252,6 +252,14 @@
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
break;
+ case NETXEN_BRDTYPE_P3_10G_TP:
+ adapter->msix_supported = !!use_msi_x;
+ if (adapter->ahw.board_type == NETXEN_NIC_XGBE)
+ adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+ else
+ adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
+ break;
+
default:
adapter->msix_supported = 0;
adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
@@ -1396,6 +1404,8 @@
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
+
+ netxen_nic_set_link_parameters(adapter);
} else if (!adapter->ahw.linkup && linkup) {
printk(KERN_INFO "%s: %s NIC Link is up\n",
netxen_nic_driver_name, netdev->name);
@@ -1404,6 +1414,8 @@
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
+
+ netxen_nic_set_link_parameters(adapter);
}
}