drivers/input/mouse/sermouse.c - kernel/msm-4.9 - Gitiles

 /*
  * $Id: sermouse.c,v 1.17 2002/03/13 10:03:43 vojtech Exp $
  *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */

 /*
  *  Serial mouse driver for Linux
  */

 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  * Should you need to contact me, the author, you can do so either by
  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */

 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/config.h>
 #include <linux/serio.h>
 #include <linux/init.h>

 #define DRIVER_DESC	"Serial mouse driver"

 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");

 static char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse", "Microsoft Mouse",
 					"Logitech M+ Mouse", "Microsoft MZ Mouse", "Logitech MZ+ Mouse",
 					"Logitech MZ++ Mouse"};

 struct sermouse {
 	struct input_dev dev;
 	signed char buf[8];
 	unsigned char count;
 	unsigned char type;
 	unsigned long last;
 	char phys[32];
 };

 /*
  * sermouse_process_msc() analyzes the incoming MSC/Sun bytestream and
  * applies some prediction to the data, resulting in 96 updates per
  * second, which is as good as a PS/2 or USB mouse.
  */

 static void sermouse_process_msc(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
 {
 	struct input_dev *dev = &sermouse->dev;
 	signed char *buf = sermouse->buf;

 	input_regs(dev, regs);

 	switch (sermouse->count) {

 		case 0:
 			if ((data & 0xf8) != 0x80) return;
 			input_report_key(dev, BTN_LEFT,   !(data & 4));
 			input_report_key(dev, BTN_RIGHT,  !(data & 1));
 			input_report_key(dev, BTN_MIDDLE, !(data & 2));
 			break;

 		case 1:
 		case 3:
 			input_report_rel(dev, REL_X, data / 2);
 			input_report_rel(dev, REL_Y, -buf[1]);
 			buf[0] = data - data / 2;
 			break;

 		case 2:
 		case 4:
 			input_report_rel(dev, REL_X, buf[0]);
 			input_report_rel(dev, REL_Y, buf[1] - data);
 			buf[1] = data / 2;
 			break;
 	}

 	input_sync(dev);

 	if (++sermouse->count == (5 - ((sermouse->type == SERIO_SUN) << 1)))
 		sermouse->count = 0;
 }

 /*
  * sermouse_process_ms() anlyzes the incoming MS(Z/+/++) bytestream and
  * generates events. With prediction it gets 80 updates/sec, assuming
  * standard 3-byte packets and 1200 bps.
  */

 static void sermouse_process_ms(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
 {
 	struct input_dev *dev = &sermouse->dev;
 	signed char *buf = sermouse->buf;

 	if (data & 0x40) sermouse->count = 0;

 	input_regs(dev, regs);

 	switch (sermouse->count) {

 		case 0:
 			buf[1] = data;
 			input_report_key(dev, BTN_LEFT,   (data >> 5) & 1);
 			input_report_key(dev, BTN_RIGHT,  (data >> 4) & 1);
 			break;

 		case 1:
 			buf[2] = data;
 			data = (signed char) (((buf[1] << 6) & 0xc0) | (data & 0x3f));
 			input_report_rel(dev, REL_X, data / 2);
 			input_report_rel(dev, REL_Y, buf[4]);
 			buf[3] = data - data / 2;
 			break;

 		case 2:
 			/* Guessing the state of the middle button on 3-button MS-protocol mice - ugly. */
 			if ((sermouse->type == SERIO_MS) && !data && !buf[2] && !((buf[0] & 0xf0) ^ buf[1]))
 				input_report_key(dev, BTN_MIDDLE, !test_bit(BTN_MIDDLE, dev->key));
 			buf[0] = buf[1];

 			data = (signed char) (((buf[1] << 4) & 0xc0) | (data & 0x3f));
 			input_report_rel(dev, REL_X, buf[3]);
 			input_report_rel(dev, REL_Y, data - buf[4]);
 			buf[4] = data / 2;
 			break;

 		case 3:

 			switch (sermouse->type) {

 				case SERIO_MS:
 					 sermouse->type = SERIO_MP;

 				case SERIO_MP:
 					if ((data >> 2) & 3) break;	/* M++ Wireless Extension packet. */
 					input_report_key(dev, BTN_MIDDLE, (data >> 5) & 1);
 					input_report_key(dev, BTN_SIDE,   (data >> 4) & 1);
 					break;

 				case SERIO_MZP:
 				case SERIO_MZPP:
 					input_report_key(dev, BTN_SIDE,   (data >> 5) & 1);

 				case SERIO_MZ:
 					input_report_key(dev, BTN_MIDDLE, (data >> 4) & 1);
 					input_report_rel(dev, REL_WHEEL,  (data & 8) - (data & 7));
 					break;
 			}

 			break;

 		case 4:
 		case 6:	/* MZ++ packet type. We can get these bytes for M++ too but we ignore them later. */
 			buf[1] = (data >> 2) & 0x0f;
 			break;

 		case 5:
 		case 7: /* Ignore anything besides MZ++ */
 			if (sermouse->type != SERIO_MZPP) break;

 			switch (buf[1]) {

 				case 1: /* Extra mouse info */

 					input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
 					input_report_key(dev, BTN_EXTRA, (data >> 5) & 1);
 					input_report_rel(dev, data & 0x80 ? REL_HWHEEL : REL_WHEEL, (data & 7) - (data & 8));

 					break;

 				default: /* We don't decode anything else yet. */

 					printk(KERN_WARNING
 						"sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
 					break;
 			}

 			break;
 	}

 	input_sync(dev);

 	sermouse->count++;
 }

 /*
  * sermouse_interrupt() handles incoming characters, either gathering them into
  * packets or passing them to the command routine as command output.
  */

 static irqreturn_t sermouse_interrupt(struct serio *serio,
 		unsigned char data, unsigned int flags, struct pt_regs *regs)
 {
 	struct sermouse *sermouse = serio_get_drvdata(serio);

 	if (time_after(jiffies, sermouse->last + HZ/10)) sermouse->count = 0;
 	sermouse->last = jiffies;

 	if (sermouse->type > SERIO_SUN)
 		sermouse_process_ms(sermouse, data, regs);
 	else
 		sermouse_process_msc(sermouse, data, regs);
 	return IRQ_HANDLED;
 }

 /*
  * sermouse_disconnect() cleans up after we don't want talk
  * to the mouse anymore.
  */

 static void sermouse_disconnect(struct serio *serio)
 {
 	struct sermouse *sermouse = serio_get_drvdata(serio);

 	input_unregister_device(&sermouse->dev);
 	serio_close(serio);
 	serio_set_drvdata(serio, NULL);
 	kfree(sermouse);
 }

 /*
  * sermouse_connect() is a callback form the serio module when
  * an unhandled serio port is found.
  */

 static int sermouse_connect(struct serio *serio, struct serio_driver *drv)
 {
 	struct sermouse *sermouse;
 	unsigned char c;
 	int err;

 	if (!serio->id.proto || serio->id.proto > SERIO_MZPP)
 		return -ENODEV;

 	if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL)))
 		return -ENOMEM;

 	memset(sermouse, 0, sizeof(struct sermouse));

 	init_input_dev(&sermouse->dev);
 	sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
 	sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
 	sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
 	sermouse->dev.private = sermouse;

 	sermouse->type = serio->id.proto;
 	c = serio->id.extra;

 	if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
 	if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
 	if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
 	if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
 	if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);

 	sprintf(sermouse->phys, "%s/input0", serio->phys);

 	sermouse->dev.name = sermouse_protocols[sermouse->type];
 	sermouse->dev.phys = sermouse->phys;
 	sermouse->dev.id.bustype = BUS_RS232;
 	sermouse->dev.id.vendor = sermouse->type;
 	sermouse->dev.id.product = c;
 	sermouse->dev.id.version = 0x0100;
 	sermouse->dev.dev = &serio->dev;

 	serio_set_drvdata(serio, sermouse);

 	err = serio_open(serio, drv);
 	if (err) {
 		serio_set_drvdata(serio, NULL);
 		kfree(sermouse);
 		return err;
 	}

 	input_register_device(&sermouse->dev);

 	printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys);

 	return 0;
 }

 static struct serio_device_id sermouse_serio_ids[] = {
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_MSC,
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_SUN,
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_MS,
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_MP,
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_MZ,
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_MZP,
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
 	{
 		.type	= SERIO_RS232,
 		.proto	= SERIO_MZPP,
 		.id	= SERIO_ANY,
 		.extra	= SERIO_ANY,
 	},
 	{ 0 }
 };

 MODULE_DEVICE_TABLE(serio, sermouse_serio_ids);

 static struct serio_driver sermouse_drv = {
 	.driver		= {
 		.name	= "sermouse",
 	},
 	.description	= DRIVER_DESC,
 	.id_table	= sermouse_serio_ids,
 	.interrupt	= sermouse_interrupt,
 	.connect	= sermouse_connect,
 	.disconnect	= sermouse_disconnect,
 };

 static int __init sermouse_init(void)
 {
 	serio_register_driver(&sermouse_drv);
 	return 0;
 }

 static void __exit sermouse_exit(void)
 {
 	serio_unregister_driver(&sermouse_drv);
 }

 module_init(sermouse_init);
 module_exit(sermouse_exit);
	/*
	* $Id: sermouse.c,v 1.17 2002/03/13 10:03:43 vojtech Exp $
	*
	* Copyright (c) 1999-2001 Vojtech Pavlik
	*/

	/*
	* Serial mouse driver for Linux
	*/

	/*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	* Should you need to contact me, the author, you can do so either by
	* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
	* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
	*/

	#include <linux/delay.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/interrupt.h>
	#include <linux/input.h>
	#include <linux/config.h>
	#include <linux/serio.h>
	#include <linux/init.h>

	#define DRIVER_DESC "Serial mouse driver"

	MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_LICENSE("GPL");

	static char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse", "Microsoft Mouse",
	"Logitech M+ Mouse", "Microsoft MZ Mouse", "Logitech MZ+ Mouse",
	"Logitech MZ++ Mouse"};

	struct sermouse {
	struct input_dev dev;
	signed char buf[8];
	unsigned char count;
	unsigned char type;
	unsigned long last;
	char phys[32];
	};

	/*
	* sermouse_process_msc() analyzes the incoming MSC/Sun bytestream and
	* applies some prediction to the data, resulting in 96 updates per
	* second, which is as good as a PS/2 or USB mouse.
	*/

	static void sermouse_process_msc(struct sermouse sermouse, signed char data, struct pt_regs regs)
	{
	struct input_dev *dev = &sermouse->dev;
	signed char *buf = sermouse->buf;

	input_regs(dev, regs);

	switch (sermouse->count) {

	case 0:
	if ((data & 0xf8) != 0x80) return;
	input_report_key(dev, BTN_LEFT, !(data & 4));
	input_report_key(dev, BTN_RIGHT, !(data & 1));
	input_report_key(dev, BTN_MIDDLE, !(data & 2));
	break;

	case 1:
	case 3:
	input_report_rel(dev, REL_X, data / 2);
	input_report_rel(dev, REL_Y, -buf[1]);
	buf[0] = data - data / 2;
	break;

	case 2:
	case 4:
	input_report_rel(dev, REL_X, buf[0]);
	input_report_rel(dev, REL_Y, buf[1] - data);
	buf[1] = data / 2;
	break;
	}

	input_sync(dev);

	if (++sermouse->count == (5 - ((sermouse->type == SERIO_SUN) << 1)))
	sermouse->count = 0;
	}

	/*
	* sermouse_process_ms() anlyzes the incoming MS(Z/+/++) bytestream and
	* generates events. With prediction it gets 80 updates/sec, assuming
	* standard 3-byte packets and 1200 bps.
	*/

	static void sermouse_process_ms(struct sermouse sermouse, signed char data, struct pt_regs regs)
	{
	struct input_dev *dev = &sermouse->dev;
	signed char *buf = sermouse->buf;

	if (data & 0x40) sermouse->count = 0;

	input_regs(dev, regs);

	switch (sermouse->count) {

	case 0:
	buf[1] = data;
	input_report_key(dev, BTN_LEFT, (data >> 5) & 1);
	input_report_key(dev, BTN_RIGHT, (data >> 4) & 1);
	break;

	case 1:
	buf[2] = data;
	data = (signed char) (((buf[1] << 6) & 0xc0) \| (data & 0x3f));
	input_report_rel(dev, REL_X, data / 2);
	input_report_rel(dev, REL_Y, buf[4]);
	buf[3] = data - data / 2;
	break;

	case 2:
	/* Guessing the state of the middle button on 3-button MS-protocol mice - ugly. */
	if ((sermouse->type == SERIO_MS) && !data && !buf[2] && !((buf[0] & 0xf0) ^ buf[1]))
	input_report_key(dev, BTN_MIDDLE, !test_bit(BTN_MIDDLE, dev->key));
	buf[0] = buf[1];

	data = (signed char) (((buf[1] << 4) & 0xc0) \| (data & 0x3f));
	input_report_rel(dev, REL_X, buf[3]);
	input_report_rel(dev, REL_Y, data - buf[4]);
	buf[4] = data / 2;
	break;

	case 3:

	switch (sermouse->type) {

	case SERIO_MS:
	sermouse->type = SERIO_MP;

	case SERIO_MP:
	if ((data >> 2) & 3) break; /* M++ Wireless Extension packet. */
	input_report_key(dev, BTN_MIDDLE, (data >> 5) & 1);
	input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
	break;

	case SERIO_MZP:
	case SERIO_MZPP:
	input_report_key(dev, BTN_SIDE, (data >> 5) & 1);

	case SERIO_MZ:
	input_report_key(dev, BTN_MIDDLE, (data >> 4) & 1);
	input_report_rel(dev, REL_WHEEL, (data & 8) - (data & 7));
	break;
	}

	break;

	case 4:
	case 6: /* MZ++ packet type. We can get these bytes for M++ too but we ignore them later. */
	buf[1] = (data >> 2) & 0x0f;
	break;

	case 5:
	case 7: /* Ignore anything besides MZ++ */
	if (sermouse->type != SERIO_MZPP) break;

	switch (buf[1]) {

	case 1: /* Extra mouse info */

	input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
	input_report_key(dev, BTN_EXTRA, (data >> 5) & 1);
	input_report_rel(dev, data & 0x80 ? REL_HWHEEL : REL_WHEEL, (data & 7) - (data & 8));

	break;

	default: /* We don't decode anything else yet. */

	printk(KERN_WARNING
	"sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
	break;
	}

	break;
	}

	input_sync(dev);

	sermouse->count++;
	}

	/*
	* sermouse_interrupt() handles incoming characters, either gathering them into
	* packets or passing them to the command routine as command output.
	*/

	static irqreturn_t sermouse_interrupt(struct serio *serio,
	unsigned char data, unsigned int flags, struct pt_regs *regs)
	{
	struct sermouse *sermouse = serio_get_drvdata(serio);

	if (time_after(jiffies, sermouse->last + HZ/10)) sermouse->count = 0;
	sermouse->last = jiffies;

	if (sermouse->type > SERIO_SUN)
	sermouse_process_ms(sermouse, data, regs);
	else
	sermouse_process_msc(sermouse, data, regs);
	return IRQ_HANDLED;
	}

	/*
	* sermouse_disconnect() cleans up after we don't want talk
	* to the mouse anymore.
	*/

	static void sermouse_disconnect(struct serio *serio)
	{
	struct sermouse *sermouse = serio_get_drvdata(serio);

	input_unregister_device(&sermouse->dev);
	serio_close(serio);
	serio_set_drvdata(serio, NULL);
	kfree(sermouse);
	}

	/*
	* sermouse_connect() is a callback form the serio module when
	* an unhandled serio port is found.
	*/

	static int sermouse_connect(struct serio serio, struct serio_driver drv)
	{
	struct sermouse *sermouse;
	unsigned char c;
	int err;

	if (!serio->id.proto \|\| serio->id.proto > SERIO_MZPP)
	return -ENODEV;

	if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL)))
	return -ENOMEM;

	memset(sermouse, 0, sizeof(struct sermouse));

	init_input_dev(&sermouse->dev);
	sermouse->dev.evbit[0] = BIT(EV_KEY) \| BIT(EV_REL);
	sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) \| BIT(BTN_RIGHT);
	sermouse->dev.relbit[0] = BIT(REL_X) \| BIT(REL_Y);
	sermouse->dev.private = sermouse;

	sermouse->type = serio->id.proto;
	c = serio->id.extra;

	if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
	if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
	if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
	if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
	if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);

	sprintf(sermouse->phys, "%s/input0", serio->phys);

	sermouse->dev.name = sermouse_protocols[sermouse->type];
	sermouse->dev.phys = sermouse->phys;
	sermouse->dev.id.bustype = BUS_RS232;
	sermouse->dev.id.vendor = sermouse->type;
	sermouse->dev.id.product = c;
	sermouse->dev.id.version = 0x0100;
	sermouse->dev.dev = &serio->dev;

	serio_set_drvdata(serio, sermouse);

	err = serio_open(serio, drv);
	if (err) {
	serio_set_drvdata(serio, NULL);
	kfree(sermouse);
	return err;
	}

	input_register_device(&sermouse->dev);

	printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys);

	return 0;
	}

	static struct serio_device_id sermouse_serio_ids[] = {
	{
	.type = SERIO_RS232,
	.proto = SERIO_MSC,
	.id = SERIO_ANY,
	.extra = SERIO_ANY,
	},
	{
	.type = SERIO_RS232,
	.proto = SERIO_SUN,
	.id = SERIO_ANY,
	.extra = SERIO_ANY,
	},
	{
	.type = SERIO_RS232,
	.proto = SERIO_MS,
	.id = SERIO_ANY,
	.extra = SERIO_ANY,
	},
	{
	.type = SERIO_RS232,
	.proto = SERIO_MP,
	.id = SERIO_ANY,
	.extra = SERIO_ANY,
	},
	{
	.type = SERIO_RS232,
	.proto = SERIO_MZ,
	.id = SERIO_ANY,
	.extra = SERIO_ANY,
	},
	{
	.type = SERIO_RS232,
	.proto = SERIO_MZP,
	.id = SERIO_ANY,
	.extra = SERIO_ANY,
	},
	{
	.type = SERIO_RS232,
	.proto = SERIO_MZPP,
	.id = SERIO_ANY,
	.extra = SERIO_ANY,
	},
	{ 0 }
	};

	MODULE_DEVICE_TABLE(serio, sermouse_serio_ids);

	static struct serio_driver sermouse_drv = {
	.driver = {
	.name = "sermouse",
	},
	.description = DRIVER_DESC,
	.id_table = sermouse_serio_ids,
	.interrupt = sermouse_interrupt,
	.connect = sermouse_connect,
	.disconnect = sermouse_disconnect,
	};

	static int __init sermouse_init(void)
	{
	serio_register_driver(&sermouse_drv);
	return 0;
	}

	static void __exit sermouse_exit(void)
	{
	serio_unregister_driver(&sermouse_drv);
	}

	module_init(sermouse_init);
	module_exit(sermouse_exit);