i2c: tegra: Fix lines over 80 characters
Checkpatch warns about some lines over 80 characters in the Tegra I2C
driver and so fix these.
While we are at it, prefix the second instance of "STOP condition" in
the comment with a "the".
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index d9979da..b90bc32 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -193,7 +193,8 @@
bool is_multimaster_mode;
};
-static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg)
+static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
+ unsigned long reg)
{
writel(val, i2c_dev->base + reg);
}
@@ -643,9 +644,10 @@
return 0;
/*
- * NACK interrupt is generated before the I2C controller generates the
- * STOP condition on the bus. So wait for 2 clock periods before resetting
- * the controller so that STOP condition has been delivered properly.
+ * NACK interrupt is generated before the I2C controller generates
+ * the STOP condition on the bus. So wait for 2 clock periods
+ * before resetting the controller so that the STOP condition has
+ * been delivered properly.
*/
if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));